Problems reading cache in LR3

Hello,
Since upgrading to a Win 7 (32-bit) machine, I had problems with LR 2.7 stopping randomly and giving me an error message that it had failed to read the catalog file and had to close.
Now, with LR 3, I am getting the same behavior, but it is telling me that it could not read the cache, rather than the catalog.    I did notice that in the develop mode, the loupe view was not hi-rez before this happened the last time.
In both cases (2.7 and 3.0), after starting the program again it checks the indicated file (catalog in 2.7 and cache in 3.0), and there have been no problems found.  However, it is a PITA to have this happening all the time.  Any ideas?
Thanks.

Try deleting (entire XXXXXPreviews.lrdata folder next to your catalog file) and rebuilding your cache.
Or better, try simply copying your catalog to a new location and run it from there. That will save you the long operation of rebuilding the cached if this (broken cache) doesn't prove to be the problem.

Similar Messages

  • I am having trouble with the cache in bridge.  When i open I get a message saying bridge has encountered a problem reading the cache try purging in the central cache to correct the situation.  I did that but now when I try to get to the folders where my p

    I am having trouble with the cache in bridge.  When i open I get a message saying bridge has encountered a problem reading the cache try purging in the central cache to correct the situation.  I did that but now when I try to get to the folders where my photos are stored bridge never gets to where I can work.  The message appears "building criteria" and I get an endless loop on the lower left panel.  How do I correct?

    You correct it by leaving Bridge alone until it finishes rebuilding its cache, overnight if necessary.

  • Query performance problem - events 2505-read cache and 2510-write cache

    Hi,
    I am experiencing severe performance problems with a query, specifically with events 2505 (Read Cache) and 2510 (Write Cache) which went up to 11000 seconds on some executions. Data Manager (400 s), OLAP data selection (90 s) and OLAP user exit (250 s) are other the other event with noticeable times. All other events are very quick.
    The query settings (RSRT) are
    persistent cache across each app server -> cluster table,
    update cache in delta process is checked ->group on infoprovider type
    use cache despite virtual characteristics/key figs checked (one info-cube has1 virtual key figure which should have a static result for a day)
    =>Do you know how I can get more details than what's in 0TCT_C02 to break down the read and write cache events time or do you have any recommandation?
    I have checked and no dataloads were in progres on the info-providers and no master data loads (change run). Overall system performance was acceptable for other queries.
    Thanks

    Hi,
    Looks like you're using BDB, not BDB JE, and this is the BDB JE forum. Could you please repost here?:
    Berkeley DB
    Thanks,
    mark

  • Bridge unable to read cache, after clicking refresh another problem

    I tried purging cache did not fix the problem. I click the refresh button in bridge to see if that might the problem. Now not only can bridge not read cache it can not build criteria, the circle just keeps spinning and spinning. I cannot open any folders therefore cannot view any of my images. Help Please!!

    No. The cache is where Bridge stores the thumbnails not the photos.
    If you purge the cache Bridge will regenerate the thumbs when visiting the folders.

  • LR5 encountered problems reading this photo.

    Hi,
    I am working on a Macbook Pro, 8gb with 1 tb
    Recently did external back up.
    Mac was having issues so we ( IT guys ) did a clean install and only brought back in basics.
    ( I was on LR3 and PSE9 ) but we didn't bring it over as mirror copy because there were so many other items on Mac I didn't need.
    I bought Mac with LR3 and PSE9 so I could not do upgrade,
    I instead started the trial today, so we could merge from the external the images to Pictures. ( so it was on external in pictures and now on os-x pictures )
    So LR5 brought all my catalogs in, I even got smug mug to find its catalogs. , but now I am getting ! on every image.
    I have selective chosen the image from external and moved it to OS X  pictures folder.
    Why am I getting the ! on the images. When I right click the ! I get error, LR has encountered problems reading this file.
    when I click find in file folder I get a tiff picture with a loop on top and if I click that I get this... Item “untitled-8547-Edit.tif” is used by OS X and can’t be opened.
    one thing I did just notice is the date on the tiff says, Jan 24th 1984 3am 0 bytes tiff image.   ( what the heck? )
    now the image right beside it to the left is the image ( I can actually see ) and it looks good.
    why is finder bringing up a bogus tiff ?
    Thank you for your help. Need to be up and running. Need these ! gone , please help.
    Diana

    Suggestion to all who encounter problems like this: if you've installed 3rd party memory cards (ram), go back to your original ram, or at least the brand of ram that your computuer came with.
    Long story, short:
    I had the same error message in LR5.  It only happened with several images in a given import.  If I deleted all of the images from the import and reimported the images, a different set of images would have the error message.  The images that originally had the message would no longer have the problem.  I deleted and reimported several times while observing the same behavior. 
    Not only did lightroom give me issues, but Bridge had problems reading the files, and the previews of the problem images would not show up in Finder (Mac speak).  This ruled out, to me at least, that it was a software issue.  I went out and purchased a new card reader and had the same problems.  I tried a different card with different images and got the same problems. 
    After I contacted Adobe, they had me upload two files with the error, and they said the files were corrupted due to faulty hardware.  I took my mac book pro (13in early 2011 w/ 10.7.5) to the apple store and they ran a diagnostic test amoung other test and we came up with nothing.  Everything seemed to be good on the hardware side.  After some research the Rep. asked me about my ram (memory cards).  I had in the past installed two 3rd party cards to boost my ram from 4GB to 8GB. The rep. suggested that I go home and test the issue with the original ram my computer came with before we go any farther.  So far, I haven't had any issues. 
    I hope this helps,
    Josef

  • Problems with cache.clear()

    Hello!
    We are having some problems with cache clears in our production cluster that we do once a day. Sometimes heaps "explode" with a lot of outgoing messages when we do a cache.clear() and the entire cluster starts failing.
    We had some success with a alternate method of doing the cache clear where we iterate cache.keySet() and do a cache.remove(key) with a pausetime of 100 ms after 20000 objects until the cache is empty. But today nodes started failing on a cache.size() before the removes started (the first thing we do is to log the size of the cache we are about to clear before the remove operations start).
    We have multiple distributed caches configured with a near cache. The nearcache has 10k objects as high units and the back caches vary in size, the largest is around 300k / node.
    In total the DistributedCache-service is handling ~20 caches.
    The cluster consists of 18 storage enabled nodes spread across 6 servers and 31 non storage enabled nodes running on 31 servers.
    The invalidation stategy on the near caches is ALL (or, its AUTO but it looks like it selects ALL since ListenerFilterCount=29 and ListenerKeyCount=0 on a StorageManager?)
    Parition count is 257, backup count 1, no changes in thread count on the service, service is DistributedCache.
    Coherence version 3.6.1.0.
    A udp test sending from one node to another displays 60 megabyte/s.
    Heapsize for the Coherence JVMs, 3gb. LargePages is used.
    Heapsize for the front nodes JVMs, 6gb. LargePages is used.
    No long GC-times (until the heaps explode), 0.2-0.6 seconds. CMS-collector.
    JDK 1.6 u21 64-bit.
    Windows 2k8R2.
    We are also running CoherenceWeb and some Read/Write-caches, but on different coherence services. We are not doing any clear/size-operations against caches owed by these services.
    Looking at some metrics from the last time we had this problem (where we crashed on cache.size()).
    The number of messages sent by the backing nodes went from <100/s to 20k-50k/s in 15 s.
    The number of messages resent by the backing nodes went from ~0/s to 1k-50k/s depending on the node in 15 s.
    At the time the total number of requests against the DistributedCache-service was around 6-8/s and node.
    To my questions, should it be a problem to do a cache clear with this setup (where the largest cache is around 5.4 million entires) ? Should it be a problem to do a cache.size()?
    What is the nicest way to do a cache.clear()? Any other strategy?
    Could a lock on a entry in the cache cause this problem? Should it really cause a problem with cache.size()?
    Any advice?
    BR,
    Carl
    Edited by: carl_abramsson on 2011-nov-14 06:16

    Hi Charlie,
    Thank you for your answer! Yes, actually we are using a lot of expiry and many of the items are created at roughly the same time! We haven't configured expiry in the cache configuration, instead we do a put with a expire.
    Regarding the workload, compared to our peak hours it has been very low when had problems with the size and clear operations. So the backing tier isn't really doing much at the time. That's what has been so strange with this problem.
    The release going live today has PRESENT as near cache invalidation strategy. We remove as much of the expire as possible in the next.
    BR,
    Carl

  • Outlook 2007: There was a problem reading one or more of your reminders. Some of your reminders may not be displayed.

    I have been banging my head on this one for a while.
    I have run the /cleanfreebusy, /resetfolders, /cleanreminders on Outlook.exe
    I moved all calendar items from all folders to a PST, then closed the PST.
    I uninstall and reinstalled Office
    I have looked for KB2412171 and one other KB that didn't apply (about Dynamics)
    My last thought was to recreate the Windows profile, but that didn't work. It still came back.
    After removing the calendar events, I just tried MFCMapi, but the Reminders table doesn't show ANY reminders! This would lead me to believe that I really did remove ALL reminders to the PST, and they aren't showing. Why then does it still say that
    it can't display the reminders?
    After using MFCMapi, I also connected to the server using Non-cached mode, saw that no reminders were present, so I got the bright idea to use non-cached mode for the client. This may or may not work over the long run, because she has 11000 items in her
    inbox.
    Any ideas?

    Hi,
    Have you finished pruning down the calendar items? If that fix the problem?
    In addition, please have a look at this thread and check if it applies:
    http://answers.microsoft.com/en-us/office/forum/office_2007-outlook/outlook-2007-there-was-a-problem-reading-your/01969b36-5c58-4677-9840-15bae96e292f
    Best Regards,
    Steve Fan
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • RE: [Adobe Reader] when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? i

    HelloThank's for your helpsI hope this document is helpfulBest Regards,
    Date: Sun, 22 Jun 2014 17:10:17 -0700
    From: [email protected]
    To: [email protected]
    Subject:  when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help me th
        when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help m
        created by Anoop9178 in Adobe Reader - View the full discussion
    Hi,
    Would it be possible for you to share the document?
    Regards,
    Anoop
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6485431#6485431
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
         To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Adobe Reader by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

    thank's for reply and your help
    i did the step's that you told me but  i still have the same problem
                                     i have the latest v.11.0.7
    i
    i disable the protected mode

  • Bridge CC. on opening message says unable to read cache, purge cache. This does not help.

    On opening message says unable to read cache, purge cache. Purging the cache does not help and Bridge continues to hang. Was working fine before.

    Mac?  REad this http://forums.adobe.com/thread/1237168

  • Problem reading RFC values from IRecordSet !!!!

    Hi All,
    I am having some problem reading values from IRecordSet. Can not seem to parse the output structure from RFC. AM using connector gateway service to execute BAPI_EXCHRATE_GETCURRENTRATES.
    Here is the code,
    MappedRecord input = rf.createMappedRecord("input");
    input.put("DATE",new String("01011990"));
    input.put("DATE_TYPE", new String("V"));
    input.put("RATE_TYPE", new String("M"));
    MappedRecord output = (MappedRecord) ix.execute(ixspec, input);
    Object rs = null;
    IRecordSet recSet = null;
    Object result = output.get("EXCH_RATE_LIST");
    if (result == null) {
    response.write("<BR>null");
    rs = new String(" ");
    } else if (result instanceof IRecordSet) {
    IRecordSet irs = (IRecordSet) result;
    response.write("<BR>Got some dataaa");
    IRecordMetaData rsmd = null;
    rsmd = irs.retrieveMetaData();
    irs.beforeFirst();
    while(irs.next()){
    response.write("Row::"+irs.getString("RATE_TYPE")+" "+irs.getString("FROM_CURR")+" "+irs.getString("EXCH_RATE"));
    Am getting the pritn statement, Got Some Data on the PDK component.
    But somehow not able to read the values from IRecordSet
    What is the mistake here?
    Pls help
    Edited by: Aakash Jain on Oct 11, 2008 12:22 AM

    Hi
    Try in this way.
    IRecordSet resultTable = (IRecordSet)outputParams.get("TABLE_NAME");
    for(resultTable.beforeFirst(); resultTable.next(); ) {
    response.write(resultTable.getString(0));
    response.write(resultTable.getString(1));
    Thanks

  • Viewing Excel Files using Tomcat - Problem with caching

    Hi all,
    A small part of an application I'm writing has links to Excel files for users to view/download. I'm currently using Tomcat v5 as the web/app server and have some very simple code (an example is shown below) which calls the excel file.
    <%@ page contentType = "application/vnd.ms-excel" %>
    <%
    response.setHeader("Pragma", "no-cache");
    response.setHeader("Cache-Control", "no-cache");
    response.setDateHeader("Expires", 0);
    response.sendRedirect("file1.xls");
    %>
    This all works except but I'm having one big problem.
    The xls file (file1.xls) is updated via a share on the server so each month, the xls file is overwritten with the same name but with different contents. I'm finding that when an update is made to the xls file and the user then attempts to view the new file in the browser they recieve only the old xls file. It's caching the xls file and I don't want it to. How can I fix this so that it automatically gives the user the new updated file.
    The only way I've managed to get Tomcat to do this is to delete the work directory and delete the file from my IE temp folder and then restart Tomcat - this is a bit much!
    Any help would be greatly appreciated.
    Thanks.

    I'd a problem with caching a few years back, for a servlet request which returned an SVG file.
    As a workaround, I ended up putting appending "#" and a timestamp / random number after it. The browser assuming each request was new, and didn't use the cache.
    Eg.
    http://myserver/returnSVG.do#1234567
    where 1234567 is a timestamp / random.
    Not sure whether you can do this on a file based URL... but maybe worth a shot...
    regards,
    Owen

  • S.O.S. - I have a problem reading an XML to save it in a database

    I have a problem reading an XML I trying to save the data in a database. In a log cuardo the message as text and is correct, but I do not type in the database
    Glassfish give me this error in the log:
    HTTPBC-E01052: The value set on the org.glassfish.openesb.address.url normalized message property is invalid. This property is expected to be of String type only.
    Accepted the message in DBBC Binding. 99574032187979-45019-134439471876390116
    Accepted message with exchange ID 99574032187979-45019-134439471876390116 in DBBC outbound message processor.
    Accepted message with exchange ID 99574032187979-45019-134439471876390116 in DBBC outbound message processor.
    Pattern for exchange Id 99574032187979-45019-134439471876390116 is http://www.w3.org/2004/08/wsdl/in-out.
    Gettin bean for {http://j2ee.netbeans.org/wsdl/bd}serviceport
    Adding reply listener for messsage exchange:99574032187979-45019-134439471876390116
    Received in-out message 99574032187979-45019-134439471876390116.
    Using Jndi Name:: jdbc/logger
    Executing SQL....insert into dbo.appender (timestamp,mensaje) values (?,?)
    BPCOR-6151:The process instance has been terminated because a fault was not handled; Fault Name is {http://docs.oasis-open.org/wsbpel/2.0/process/executable}selectionFailure; Fault Data is null
    com.sun.jbi.engine.bpel.core.bpel.exception.StandardException: BPCOR-6174:Selection Failure occurred in BPEL({http://enterprise.netbeans.org/bpel/MapeoPedidosEntrada/MapeoPE}MapeoPE) at line 39
    BPCOR-6129:Line Number is 37
    BPCOR-6130:Activity Name is Assign1
    at com.sun.jbi.engine.bpel.core.bpel.engine.impl.BPELInterpreter.createVirtualFaultUnit(BPELInterpreter.java:234)
    at com.sun.jbi.engine.bpel.core.bpel.engine.impl.BPELInterpreter.execute(BPELInterpreter.java:202)
    at com.sun.jbi.engine.bpel.core.bpel.engine.BusinessProcessInstanceThread.execute(BusinessProcessInstanceThread.java:98)
    at com.sun.jbi.engine.bpel.core.bpel.engine.impl.BPELProcessManagerImpl.process(BPELProcessManagerImpl.java:1046)
    at com.sun.jbi.engine.bpel.core.bpel.engine.impl.EngineImpl.process(EngineImpl.java:278)
    at com.sun.jbi.engine.bpel.core.bpel.engine.impl.EngineImpl.process(EngineImpl.java:1293)
    at com.sun.jbi.engine.bpel.BPELSEInOutThread.processStatus(BPELSEInOutThread.java:590)
    at com.sun.jbi.engine.bpel.BPELSEInOutThread.processMsgEx(BPELSEInOutThread.java:292)
    at com.sun.jbi.engine.bpel.BPELSEInOutThread.run(BPELSEInOutThread.java:193)
    normalized message
    Finished processing outbound messages.
    Accepted the message in DBBC Binding. 99574032187979-45019-134439471876390116
    Accepted message with exchange ID 99574032187979-45019-134439471876390116 in DBBC outbound message processor.
    Accepted message with exchange ID 99574032187979-45019-134439471876390116 in DBBC outbound message processor.
    Pattern for exchange Id 99574032187979-45019-134439471876390116 is http://www.w3.org/2004/08/wsdl/in-out.
    Gettin bean for {http://j2ee.netbeans.org/wsdl/bd}serviceport
    Adding reply listener for messsage exchange:99574032187979-45019-134439471876390116
    Received in-out message 99574032187979-45019-134439471876390116.
    Finished processing outbound messages.
    I take data from a XML and I put in two tables in a database. I do not understand what it is the problem.
    The main BPEL is this:
    <?xml version="1.0" encoding="UTF-8"?>
    <process
    name="MapeoPE"
    targetNamespace="http://enterprise.netbeans.org/bpel/MapeoPedidosEntrada/MapeoPE"
    xmlns="http://docs.oasis-open.org/wsbpel/2.0/process/executable"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:sxt="http://www.sun.com/wsbpel/2.0/process/executable/SUNExtension/Trace"
    xmlns:sxed="http://www.sun.com/wsbpel/2.0/process/executable/SUNExtension/Editor"
    xmlns:tns="http://enterprise.netbeans.org/bpel/MapeoPedidosEntrada/MapeoPE" xmlns:sxxf="http://www.sun.com/wsbpel/2.0/process/executable/SUNExtension/XPathFunctions" xmlns:ns0="http://j2ee.netbeans.org/xsd/tableSchema" xmlns:ns1="http://java.sun.com/xml/ns/jaxb" xmlns:ns2="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_cab">
    <import namespace="http://j2ee.netbeans.org/wsdl/MapeoPedidosEntrada/PollInPE" location="PollInPE.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
    <import namespace="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_cab" location="recumat_htor2-siglo_ped_ext_cab.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
    <import namespace="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_lin" location="recumat_htor2-siglo_ped_ext_lin.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
    <import namespace="http://j2ee.netbeans.org/wsdl/bitacora/bitacora" location="localhost_9080/bitacoraService/bitacoraPort.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
    <partnerLinks>
    <partnerLink name="siglo_ped_ext_cab" xmlns:tns="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_cab" partnerLinkType="tns:jdbcpartner" partnerRole="jdbcPortTypeRole"/>
    <partnerLink name="siglo_ped_ext_lin" xmlns:tns="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_lin" partnerLinkType="tns:jdbcpartner" partnerRole="jdbcPortTypeRole"/>
    <partnerLink name="log" xmlns:tns="http://j2ee.netbeans.org/wsdl/bitacora/bitacora" partnerLinkType="tns:bitacora" partnerRole="bitacoraPortTypeRole"/>
    <partnerLink name="Entrada" xmlns:tns="http://j2ee.netbeans.org/wsdl/MapeoPedidosEntrada/PollInPE" partnerLinkType="tns:PollInPE" myRole="FileInboundPortTypeRole"/>
    </partnerLinks>
    <variables>
    <variable name="BitacoraOperationIn" xmlns:tns="http://j2ee.netbeans.org/wsdl/bitacora/bitacora" messageType="tns:bitacoraOperationRequest"/>
    <variable name="InsertOutSIGLO_PED_EXT_LIN" xmlns:tns="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_lin" messageType="tns:insertRetMsg"/>
    <variable name="InsertInSIGLO_PED_EXT_LIN" xmlns:tns="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_lin" messageType="tns:inputMsg"/>
    <variable name="InsertOutSIGLO_PED_EXT_CAB" xmlns:tns="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_cab" messageType="tns:insertRetMsg"/>
    <variable name="InsertInSIGLO_PED_EXT_CAB" xmlns:tns="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_cab" messageType="tns:inputMsg"/>
    <variable name="PollIn" xmlns:tns="http://j2ee.netbeans.org/wsdl/MapeoPedidosEntrada/PollInPE" messageType="tns:PollInputMessage"/>
    </variables>
    <sequence>
    <receive name="Receive1" createInstance="yes" partnerLink="Entrada" operation="poll" xmlns:tns="http://j2ee.netbeans.org/wsdl/MapeoPedidosEntrada/PollInPE" portType="tns:FileInboundPortType" variable="PollIn"/>
    <assign name="Assign2log">
    <copy>
    <from>string($PollIn.part1)</from>
    <to variable="BitacoraOperationIn" part="part1"/>
    </copy>
    </assign>
    <invoke name="log" partnerLink="log" operation="bitacoraOperation" xmlns:tns="http://j2ee.netbeans.org/wsdl/bitacora/bitacora" portType="tns:bitacoraPortType" inputVariable="BitacoraOperationIn"/>
    <assign name="Assign1">
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/@numero</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_numero_pedido</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/@FechaPedido</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_fecha_pedido</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/@FechaEntrega</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_fecha_entrega</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/@Observaciones</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_observaciones</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/@ejercicio</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_ejercicio</to>
    </copy>
    <copy>
    <from>number($PollIn.part1/ns1:ORDERS/@Funcion)</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_funcion</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/@tipoPedido</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_tipo_pedido</to>
    </copy>
    <copy>
    <from>string($PollIn.part1/ns1:ORDERS/@condFacturar)</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_condfacturar</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Usuario/@id</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_usuario_id</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Usuario/ns1:Contacto/@tipo</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_contacto_tipo</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Usuario/ns1:Contacto/@id</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_contacto_id</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Usuario/ns1:Contacto/@descripcion</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_contacto_desc</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Usuario/ns1:Contacto/@valor</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_contacto_valor</to>
    </copy>
    <copy>
    <from>number($PollIn.part1/ns1:ORDERS/ns1:Procedimiento/@codigo)</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_proced_cod</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Procedimiento/@descripcion</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_proced_desc</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/@id</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_ped_ext_cab_pk</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Procedimiento/@id</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_proced_id</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Contrato/@id</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_contrato_id</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Contrato/@Expediente</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_contr_expedte</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Contrato/@CCA</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_contr_cca</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Empresa/@codigo</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_emp_cod</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Empresa/@id</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_empresa_id</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Empresa/@CIF</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_emp_cif</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Empresa/@nombreComercial</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_emp_nom_comerc</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Empresa/@EANDestino</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_emp_ean_dest</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Empresa/@nombreFiscal</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_emp_nom_fiscal</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Empresa/@EANvendedor</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_emp_ean_vend</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:OrganoGestor/@descripcion</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_orgestor_desc</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:OrganoGestor/@id</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_orgestor_id</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:OrganoGestor/@EANEmisor</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_orges_eanemis</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:OrganoGestor/@EANQpide</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_orges_eanqpide</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:OrganoGestor/@EANAqsf</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_orges_eanaqsf</to>
    </copy>
    <copy>
    <from>number($PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@numeroSerie)</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_num_serie</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@numeroLinea</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_numero_linea</to>
    </copy>
    <copy>
    <from>number($PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@numeroLote)</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_num_lote</to>
    </copy>
    <copy>
    <from>number($PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@numeroAlbaran)</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_num_albaran</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@fechaAlbaran</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_fecha_albaran</to>
    </copy>
    <copy>
    <from>number($PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@valorarAlbaranes)</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_valorar_albar</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@CantidadCompra</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_cant_compra</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@Observaciones</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_observaciones</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@cantidadPendiente</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_cant_pendiente</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@cantidadAnulada</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_cant_anulada</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@precio</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_precio</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Producto/@CIP</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_produ_cip</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Producto/@marca</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:spl_produ_marca</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Producto/@refFabricante</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_produ_refabric</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Producto/@modelo</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_produ_modelo</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Producto/@id</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_producto_id</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Articulo/@codigo</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_art_codigo</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Articulo/@codigoLocal</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_art_codigo_loc</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Articulo/@codigoSAS</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_art_codigo_sas</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Articulo/@unidadMedida</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_art_und_medida</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Articulo/@unidadContratacion</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_art_und_contra</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Articulo/@id</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_artgenerico_id</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:InfLogistica/@id</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_presentac_id</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:InfLogistica/@codigoEAN</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_pre_cod_ean</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:InfLogistica/@refDistribuidor</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_ref_distribuid</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:InfLogistica/ns1:Oferta/@id</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_oferta_id</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:InfLogistica/ns1:Oferta/@factorContratacion</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_factor_contrat</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:InfLogistica/ns1:Oferta/@cantidadEnUnidades</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_cant_en_unds</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:InfLogistica/ns1:Oferta/@cantidadContratacion</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_cant_contrata</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:ProgramacionEntregas/ns1:Entregar/@id</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_linprogent_id</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:ProgramacionEntregas/ns1:Entregar/@cantidad</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_cant_entrega</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:ProgramacionEntregas/ns1:Entregar/@fecha</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_fecha_entrega</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:PuntoEntrega/@id</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_pto_entrega_id</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:PuntoEntrega/@EANReceptor</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_ean_receptor</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:PuntoEntrega/@descripcion</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_pto_entre_desc</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Origen/@id</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_origen_id</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Origen/ns1:SolicitudLinea/@id</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_lin_solic_id</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Origen/ns1:TipoOrigen/@descripcion</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_tp_origen_desc</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Origen/ns1:TipoOrigen/@id</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_tp_origen_id</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Origen/ns1:SolicitudLinea/ns1:Solicitud/@id</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_solicitud_id</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Origen/ns1:SolicitudLinea/ns1:Solicitud/@codigo</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_solicitud_cod</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@id</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_ped_ext_lin_pk</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/@id</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pec_ped_ext_cab_pk</to>
    </copy>
    </assign>
    <invoke name="Invoke_SIGLO_PED_EXT_CAB" partnerLink="siglo_ped_ext_cab" operation="insert" portType="ns2:jdbcPortType" inputVariable="InsertInSIGLO_PED_EXT_CAB" outputVariable="InsertOutSIGLO_PED_EXT_CAB"/>
    <invoke name="Invoke_SIGLO_PED_EXT_LIN" partnerLink="siglo_ped_ext_lin" operation="insert" xmlns:tns="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_lin" portType="tns:jdbcPortType" inputVariable="InsertInSIGLO_PED_EXT_LIN" outputVariable="InsertOutSIGLO_PED_EXT_LIN"/>
    </sequence>
    </process> Thanks in advance!!!
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  &n

    I change the bpel to this:
    <?xml version="1.0" encoding="UTF-8"?>
    <process
    name="MapeoPE"
    targetNamespace="http://enterprise.netbeans.org/bpel/MapeoPedidosEntrada/MapeoPE"
    xmlns="http://docs.oasis-open.org/wsbpel/2.0/process/executable"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:sxt="http://www.sun.com/wsbpel/2.0/process/executable/SUNExtension/Trace"
    xmlns:sxed="http://www.sun.com/wsbpel/2.0/process/executable/SUNExtension/Editor"
    xmlns:tns="http://enterprise.netbeans.org/bpel/MapeoPedidosEntrada/MapeoPE" xmlns:sxxf="http://www.sun.com/wsbpel/2.0/process/executable/SUNExtension/XPathFunctions" xmlns:ns0="http://j2ee.netbeans.org/xsd/tableSchema" xmlns:ns1="http://java.sun.com/xml/ns/jaxb" xmlns:ns2="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_cab">
    <import namespace="http://j2ee.netbeans.org/wsdl/MapeoPedidosEntrada/PollInPE" location="PollInPE.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
    <import namespace="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_cab" location="recumat_htor2-siglo_ped_ext_cab.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
    <import namespace="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_lin" location="recumat_htor2-siglo_ped_ext_lin.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
    <import namespace="http://j2ee.netbeans.org/wsdl/bitacora/bitacora" location="localhost_9080/bitacoraService/bitacoraPort.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
    <partnerLinks>
    <partnerLink name="siglo_ped_ext_cab" xmlns:tns="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_cab" partnerLinkType="tns:jdbcpartner" partnerRole="jdbcPortTypeRole"/>
    <partnerLink name="siglo_ped_ext_lin" xmlns:tns="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_lin" partnerLinkType="tns:jdbcpartner" partnerRole="jdbcPortTypeRole"/>
    <partnerLink name="log" xmlns:tns="http://j2ee.netbeans.org/wsdl/bitacora/bitacora" partnerLinkType="tns:bitacora" partnerRole="bitacoraPortTypeRole"/>
    <partnerLink name="Entrada" xmlns:tns="http://j2ee.netbeans.org/wsdl/MapeoPedidosEntrada/PollInPE" partnerLinkType="tns:PollInPE" myRole="FileInboundPortTypeRole"/>
    </partnerLinks>
    <variables>
    <variable name="BitacoraOperationIn" xmlns:tns="http://j2ee.netbeans.org/wsdl/bitacora/bitacora" messageType="tns:bitacoraOperationRequest"/>
    <variable name="InsertOutSIGLO_PED_EXT_LIN" xmlns:tns="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_lin" messageType="tns:insertRetMsg"/>
    <variable name="InsertInSIGLO_PED_EXT_LIN" xmlns:tns="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_lin" messageType="tns:inputMsg"/>
    <variable name="InsertOutSIGLO_PED_EXT_CAB" xmlns:tns="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_cab" messageType="tns:insertRetMsg"/>
    <variable name="InsertInSIGLO_PED_EXT_CAB" xmlns:tns="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_cab" messageType="tns:inputMsg"/>
    <variable name="PollIn" xmlns:tns="http://j2ee.netbeans.org/wsdl/MapeoPedidosEntrada/PollInPE" messageType="tns:PollInputMessage"/>
    </variables>
    <faultHandlers>
    <catchAll>
    <sequence name="Sequence1" xmlns:tns="http://j2ee.netbeans.org/wsdl/bitacora/bitacora">
    <assign name="Assign2log">
    <copy>
    <from>string($PollIn.part1)</from>
    <to variable="BitacoraOperationIn" part="part1"/>
    </copy>
    </assign>
    <invoke name="log" partnerLink="log" operation="bitacoraOperation" xmlns:tns="http://j2ee.netbeans.org/wsdl/bitacora/bitacora" portType="tns:bitacoraPortType" inputVariable="BitacoraOperationIn"/>
    </sequence>
    </catchAll>
    </faultHandlers>
    <sequence>
    <receive name="Receive1" createInstance="yes" partnerLink="Entrada" operation="poll" xmlns:tns="http://j2ee.netbeans.org/wsdl/MapeoPedidosEntrada/PollInPE" portType="tns:FileInboundPortType" variable="PollIn"/>
    <sequence name="Sequence1bis" xmlns:tns="http://j2ee.netbeans.org/wsdl/bitacora/bitacora">
    <assign name="bisAssign2log">
    <copy>
    <from>string($PollIn.part1)</from>
    <to variable="BitacoraOperationIn" part="part1"/>
    </copy>
    </assign>
    <invoke name="bislog" partnerLink="log" operation="bitacoraOperation" xmlns:tns="http://j2ee.netbeans.org/wsdl/bitacora/bitacora" portType="tns:bitacoraPortType" inputVariable="BitacoraOperationIn"/>
    </sequence>
    <empty name="HastaAquiVa"/>
    <assign name="Assign1">
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/@numero</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_numero_pedido</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/@FechaPedido</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_fecha_pedido</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/@FechaEntrega</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_fecha_entrega</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/@Observaciones</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_observaciones</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/@ejercicio</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_ejercicio</to>
    </copy>
    <copy>
    <from>number($PollIn.part1/ns1:ORDERS/@Funcion)</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_funcion</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/@tipoPedido</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_tipo_pedido</to>
    </copy>
    <copy>
    <from>string($PollIn.part1/ns1:ORDERS/@condFacturar)</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_condfacturar</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Usuario/@id</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_usuario_id</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Usuario/ns1:Contacto/@tipo</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_contacto_tipo</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Usuario/ns1:Contacto/@id</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_contacto_id</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Usuario/ns1:Contacto/@descripcion</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_contacto_desc</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Usuario/ns1:Contacto/@valor</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_contacto_valor</to>
    </copy>
    <copy>
    <from>number($PollIn.part1/ns1:ORDERS/ns1:Procedimiento/@codigo)</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_proced_cod</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Procedimiento/@descripcion</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_proced_desc</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/@id</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_ped_ext_cab_pk</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Procedimiento/@id</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_proced_id</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Contrato/@id</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_contrato_id</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Contrato/@Expediente</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_contr_expedte</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Contrato/@CCA</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_contr_cca</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Empresa/@codigo</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_emp_cod</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Empresa/@id</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_empresa_id</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Empresa/@CIF</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_emp_cif</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Empresa/@nombreComercial</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_emp_nom_comerc</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Empresa/@EANDestino</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_emp_ean_dest</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Empresa/@nombreFiscal</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_emp_nom_fiscal</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Empresa/@EANvendedor</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_emp_ean_vend</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:OrganoGestor/@descripcion</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_orgestor_desc</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:OrganoGestor/@id</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_orgestor_id</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:OrganoGestor/@EANEmisor</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_orges_eanemis</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:OrganoGestor/@EANQpide</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_orges_eanqpide</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:OrganoGestor/@EANAqsf</from>
    <to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_orges_eanaqsf</to>
    </copy>
    <copy>
    <from>number($PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@numeroSerie)</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_num_serie</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@numeroLinea</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_numero_linea</to>
    </copy>
    <copy>
    <from>number($PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@numeroLote)</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_num_lote</to>
    </copy>
    <copy>
    <from>number($PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@numeroAlbaran)</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_num_albaran</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@fechaAlbaran</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_fecha_albaran</to>
    </copy>
    <copy>
    <from>number($PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@valorarAlbaranes)</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_valorar_albar</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@CantidadCompra</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_cant_compra</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@Observaciones</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_observaciones</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@cantidadPendiente</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_cant_pendiente</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@cantidadAnulada</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_cant_anulada</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@precio</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_precio</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Producto/@CIP</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_produ_cip</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Producto/@marca</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:spl_produ_marca</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Producto/@refFabricante</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_produ_refabric</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Producto/@modelo</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_produ_modelo</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Producto/@id</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_producto_id</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Articulo/@codigo</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_art_codigo</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Articulo/@codigoLocal</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_art_codigo_loc</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Articulo/@codigoSAS</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_art_codigo_sas</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Articulo/@unidadMedida</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_art_und_medida</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Articulo/@unidadContratacion</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_art_und_contra</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Articulo/@id</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_artgenerico_id</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:InfLogistica/@id</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_presentac_id</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:InfLogistica/@codigoEAN</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_pre_cod_ean</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:InfLogistica/@refDistribuidor</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_ref_distribuid</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:InfLogistica/ns1:Oferta/@id</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_oferta_id</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:InfLogistica/ns1:Oferta/@factorContratacion</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_factor_contrat</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:InfLogistica/ns1:Oferta/@cantidadEnUnidades</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_cant_en_unds</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:InfLogistica/ns1:Oferta/@cantidadContratacion</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_cant_contrata</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:ProgramacionEntregas/ns1:Entregar/@id</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_linprogent_id</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:ProgramacionEntregas/ns1:Entregar/@cantidad</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_cant_entrega</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:ProgramacionEntregas/ns1:Entregar/@fecha</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_fecha_entrega</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:PuntoEntrega/@id</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_pto_entrega_id</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:PuntoEntrega/@EANReceptor</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_ean_receptor</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:PuntoEntrega/@descripcion</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_pto_entre_desc</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Origen/@id</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_origen_id</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Origen/ns1:SolicitudLinea/@id</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_lin_solic_id</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Origen/ns1:TipoOrigen/@descripcion</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_tp_origen_desc</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Origen/ns1:TipoOrigen/@id</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_tp_origen_id</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Origen/ns1:SolicitudLinea/ns1:Solicitud/@id</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_solicitud_id</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Origen/ns1:SolicitudLinea/ns1:Solicitud/@codigo</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_solicitud_cod</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@id</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_ped_ext_lin_pk</to>
    </copy>
    <copy>
    <from>$PollIn.part1/ns1:ORDERS/@id</from>
    <to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pec_ped_ext_cab_pk</to>
    </copy>
    </assign>
    <invoke name="Invoke_SIGLO_PED_EXT_CAB" partnerLink="siglo_ped_ext_cab" operation="insert" portType="ns2:jdbcPortType" inputVariable="InsertInSIGLO_PED_EXT_CAB" outputVariable="InsertOutSIGLO_PED_EXT_CAB"/>
    <invoke name="Invoke_SIGLO_PED_EXT_LIN" partnerLink="siglo_ped_ext_lin" operation="insert" xmlns:tns="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_lin" portType="tns:jdbcPortType" inputVariable="InsertInSIGLO_PED_EXT_LIN" outputVariable="InsertOutSIGLO_PED_EXT_LIN"/>
    </sequence>
    </process>
    And change the XML input to that:
    <?xml version="1.0" encoding="iso-8859-1"?>
    <root>
    <ORDERS id="125" numero="34" FechaPedido="05/10/2006" FechaEntrega="05/11/2006" Observaciones="Pedido en monitorización." ejercicio="2006" Funcion="0" tipoPedido="220" condFacturar="81E">
    <Usuario id="45">
    <Contacto id="13" tipo="TE" descripcion="Teléfono de Juanjo Carmona" valor="620987845"/>
    </Usuario>
    <Procedimiento id="1" codigo="0" descripcion="Concurso Público"/>
    <Contrato id="1457467" Expediente="07CSU001" CCA="123+WER345"/>
    <Empresa id="13" codigo="237619" nombreComercial="nombreComercial1" nombreFiscal="nombreFiscal1" CIF="cif1" EANvendedor="CODIGOEAN111" EANDestino="CODIGOEAN112"/>
    <OrganoGestor id="1" descripcion="Hospital Virgen de Tal" EANQpide="CODIGOEAN113" EANAqsf="CODIGOEAN114" EANEmisor="CODIGOEAN115"/>
    <Lineas>
    <PedidoLinea id="234" numeroLinea="1" numeroSerie="1" numeroLote="1" numeroAlbaran="1" fechaAlbaran="05/11/2006" valorarAlbaranes="true" CantidadCompra="3" Observaciones="observaciones lÃÂnea1" cantidadPendiente="3" cantidadAnulada="0" precio="11.243">
    <Producto id="1228" CIP="" refFabricante="CS-16402" modelo="modelo1" marca="marca1"/>
    <Articulo id="89" codigo="001097" codigoSAS="01.02.07.120045" codigoLocal="014554" unidadContratacion="CMK" unidadMedida="CMK"/>
    <InfLogistica id="45" codigoEAN="codigoEAN1" refDistribuidor="refDistribuidor1">
    <Oferta id="67" factorContratacion="2.5" cantidadContratacion="7.5" cantidadEnUnidades="7"/>
    </InfLogistica>
    <ProgramacionEntregas>
    <Entregar id="61" cantidad="3" fecha="05/11/2006"/>
    </ProgramacionEntregas>
    <PuntoEntrega id="546" EANReceptor="CODIGOEAN120" descripcion="Almacen principal"/>
    <Origen id="464">
    <TipoOrigen id="1" descripcion="tipo1"/>
    <SolicitudLinea id = "453">
    <Solicitud id="67" codigo="3456"/>
    </SolicitudLinea>
    </Origen>
    </PedidoLinea>
    </Lineas>
    </ORDERS>
    </root>
    An the result is:
    I18N: BPJBI-3002: Pattern for exchange Id 123033969803782-31456-134439750656880061 is http://www.w3.org/2004/08/wsdl/in-only
    I18N: BPJBI-3004: Received in-only message for M Ex 123033969803782-31456-134439750656880061 content is <?xml version="1.0" encoding="UTF-8"?><jbi:message xmlns:msgns="http://j2ee.netbeans.org/wsdl/MapeoPedidosEntrada/PollInPE" type="msgns:PollInputMessage" version="1.0" xmlns:jbi="http://java.sun.com/xml/ns/jbi/wsdl-11-wrapper"><jbi:part><root>
    <ORDERS FechaEntrega="05/11/2006" FechaPedido="05/10/2006" Funcion="0" Observaciones="Pedido en monitorizaci�³n." condFacturar="81E" ejercicio="2006" id="125" numero="34" tipoPedido="220">
    <Usuario id="45">
    <Contacto descripcion="Tel�©fono de Juanjo Carmona" id="13" tipo="TE" valor="620987845"/>
    </Usuario>
    <Procedimiento codigo="0" descripcion="Concurso P�ºblico" id="1"/>
    <Contrato CCA="123+WER345" Expediente="07CSU001" id="1457467"/>
    <Empresa CIF="cif1" EANDestino="CODIGOEAN112" EANvendedor="CODIGOEAN111" codigo="237619" id="13" nombreComercial="nombreComercial1" nombreFiscal="nombreFiscal1"/>
    <OrganoGestor EANAqsf="CODIGOEAN114" EANEmisor="CODIGOEAN115" EANQpide="CODIGOEAN113" descripcion="Hospital Virgen de Tal" id="1"/>
    <Lineas>
    <PedidoLinea CantidadCompra="3" Observaciones="observaciones lÃ?Ânea1" cantidadAnulada="0" cantidadPendiente="3" fechaAlbaran="05/11/2006" id="234" numeroAlbaran="1" numeroLinea="1" numeroLote="1" numeroSerie="1" precio="11.243" valorarAlbaranes="true">
    <Producto CIP="" id="1228" marca="marca1" modelo="modelo1" refFabricante="CS-16402"/>
    <Articulo codigo="001097" codigoLocal="014554" codigoSAS="01.02.07.120045" id="89" unidadContratacion="CMK" unidadMedida="CMK"/>
    <InfLogistica codigoEAN="codigoEAN1" id="45" refDistribuidor="refDistribuidor1">
    <Oferta cantidadContratacion="7.5" cantidadEnUnidades="7" factorContratacion="2.5" id="67"/>
    </InfLogistica>
    <ProgramacionEntregas>
    <Entregar cantidad="3" fecha="05/11/2006" id="61"/>
    </ProgramacionEntregas>
    <PuntoEntrega EANReceptor="CODIGOEAN120" descripcion="Almacen principal" id="546"/>
    <Origen id="464">
    <TipoOrigen descripcion="tipo1" id="1"/>
    <SolicitudLinea id="453">
    <Solicitud codigo="3456" id="67"/>
    </SolicitudLinea>
    </Origen>
    </PedidoLinea>
    </Lineas>
    </ORDERS>
    </root></jbi:part></jbi:message>
    I18N: BPJBI-3015: Sending status for 123033969803782-31456-134439750656880061. Status: Done.
    I18N: BPJBI-3019: Sending a one way outbound message to the NMR. MessageExchangeId is 123033969803782-31456-134439750657350062, service name is {http://enterprise.netbeans.org/bpel/MapeoPedidosEntrada/MapeoPE}log, endpoint name is bitacoraPortTypeRole_partnerRole.
    I18N: BPJBI-3018: The contents of the message are : <?xml version="1.0" encoding="UTF-8"?><jbi:message xmlns:msgns="http://j2ee.netbeans.org/wsdl/bitacora/bitacora" type="msgns:bitacoraOperationRequest" version="1.0" xmlns:jbi="http://java.sun.com/xml/ns/jbi/wsdl-11-wrapper"><jbi:part>
    </jbi:part></jbi:message>
    HTTPBC-E01052: The value set on the org.glassfish.openesb.address.url normalized message property is invalid. This property is expected to be of String type only.
    I18N: BPJBI-3002: Pattern for exchange Id 123033969803782-31456-134439750657350063 is http://www.w3.org/2004/08/wsdl/in-only
    I18N: BPJBI-3004: Received in-only message for M Ex 123033969803782-31456-134439750657350063 content is <?xml version="1.0" encoding="UTF-8"?><jbi:message xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:msgns="http://j2ee.netbeans.org/wsdl/bitacora/bitacora" name="input1" type="msgns:bitacoraOperationRequest" version="1.0" xmlns:jbi="http://java.sun.com/xml/ns/jbi/wsdl-11-wrapper"><jbi:part xmlns:m="http://j2ee.netbeans.org/wsdl/bitacora/bitacora">
    </jbi:part></jbi:message>
    I18N: BPJBI-3015: Sending status for 123033969803782-31456-134439750657350063. Status: Done.
    I18N: BPJBI-3002: Pattern for exchange Id 123033969803782-31456-134439750657350062 is http://www.w3.org/2004/08/wsdl/in-only
    I18N: BPCOR-3003:
    document before transformation:
    <?xml version="1.0" encoding="UTF-8" standalone="no"?><jbi:message xm

  • There was an error processing a page. there was a problem reading this document (110)?

    hi
    my name is kapil and i am trying to open one (which is downloded) pdf document.which giving me an error as there was an error processing a page. there was a problem reading this document (110) for some page only. i am using acrobat reader x. is it any 3d setting or any thing else please give me an idea. i am waiting for replay as soon as possible...........
    your sincerely
    KAPIL TRIVEDI

    When I encountered an error "there was a problem reading this document 110" in Acrobat Pro 11 on 28.7 MB CS6 file, it indeed was very frustrating.
    I solved my problem, but since I don't know which step benefitted me, I've to enumerate all the steps I took:
    Read below:
    1.1. I could copy the file anywhere on the drive, but couldn't 'save as' from Acrobat Pro.
    1.2. No document security was applied of any sort on the file.
    1.3. Still in the first tab of the document properties, all details under advance section were empty. No 'PDF Version' 'location' 'file size' etc were populated. Nothing.
    1.4. I couldn't change and save anything in any of property dialogue. I could comment on the text, but as soon as I tried to save, it gave an error (some sort of 'File reading' error).
    1.5. When I tried to extract a page (I tried many), it gave 'reading error'.
    1.6. I didn't try 'splitting error'. Since I was 100% sure, it'll give me same reading error.
    1.7. I opened the file in Firefox and tried saving it as pdf from there. But no error, but no save either.
    1.8. I ran 'Remove Hidden Information' from protection panel without any errors.
    1.9. I tried 'sanitize document' from the same tab, but didn't succeed.
    1.10. Then (here I think the problem was resolved), from Document Processing panel, I did some commands. 1st, 'Export all images', successfully. Then 'Remove all links', it found 0.
    1.11. Then in 'print production' panel, I clicked/tried to open acrobat distiller. The same opened, did some processing. But I don't know if it did something in solving the problem or not.
    1.12. Although I think my problem was resolved till now, but the last step I did was 'Saved As' the file (from the file menu) as a .ps file. Though I've not yet reopened/used that ps file (to convert it into a pdf file again). But around here I wanted to close the file and it asked me whether I wanted to save the file, I said yes. And it saved the file correctly. And I checked that in properties dialogue, the missing information was populated too.
    1.13. Sorry for so lengthy instructions, but I had no choice.

  • There was a problem reading this document (117)

    Dear Designers
    I am facing a strange problem while doing test presentment in Adobe output designer. When i do a test presentment with my dat file which is meant for fax (^job newFax   -fform01F.MDF) , i see the pdf (consist of 2 pages ) but as soon as i scroll down to next page (Pg 2)  of my pdf ; it giving me a Adobe reader error pop up "There was a problem reading this document (117)" and when i click OK and comes to page 2 (i'm seeing the content of Pg2 curerntly) and scroll back to page 1 the data on page 2 goes blank. What could be the possible reason for  this ? I assume the flaw is on Adobe reader side , but please brighten me with the knowledge if there is some issue on dat file side.
    Any possible guidance or help would be highly appreciated
    thanks
    jaY

    Sorry, I do not quite understand what your problem is:
    you have a problem with signing in to the ExportPDF service ?
    you have a problem opening PDF files ?  If so, are these local or online documents?
    P.S. Reader XI and earlier will no longer support Document Cloud PDF services as of May 20; see https://forums.adobe.com/docs/DOC-5891

  • THE FAMOUS ERROR: There was a problem reading this document (15) - Thanks Adobe Engineering team

    As a result of this error, I cannot delete pages in a big PDF file I have of 1032 pages.
    The error, famous on the web and in Google, is:
    there was a problem reading this document (15)
    I hope I can find a solution for this, because I cannot delete the unnecessary pages inside the document which is driving me crazy.
    Adobe Acrobat X has a very poor quality testing. In fact I don't beleive Adobe test their products, I think they just program them, label them as the finished product, ASK FOR A HIGH PRICE, OF COURSE, and release them to the market creating a lot of nightmares and headaches to the customer.
    Adobe Acrobat X crashed several times when the files have flash content inside or formularies. The program, simply, is bad programmed with a very poor engineering inside.
    As soon I find an alternative for PDF, I will switch, I promise, in fact I don't promise it, I SWEAR IT.
    And if I dont find a solution for this I will put in my car a banner that says "DON'T BUY ADOBE ACROBAT, IS THE WORST PROGRAM YOU CAN FIND!"
    I'm loosing days and days of work, this is costing me problems and money.

    Yes, there is something wrong with the document. That is the defective programming the Adobe engineering team did. And please, allow me to explain you why it is defective. After you spend millions dollars in 950 engineers and 3100 beta testers, you can destroy Adobe Acrobat X easily just downloading a website rich in flash content. Some animated banners in the downloaded pages from the web, it's enough to destroy it.
    Just go to a website where you have animated banners, and press Shift+Crtl+O to download the pages...
    Save your PDF document and then try to work with it.
    If the document has a big size, let's say 1000 pages approximately, and many of them have flash content... Adobe Acrobat X crash automatically just moving from one page to another.
    As simple as that.
    Is the most unstable program I've seen in all my life. And please, don't tell me it's my machine, because I've tested it in other computers. The same!
    But there is more! yes
    Forms fields also destroy Acrobat X
    In a big PDF file having several pages inside with forms, just go to Tools, Forms and Edit, then in the list of pages try to delete the forms fields selecting them and pressing the Del key... crasshhhh Acrobat X die.
    What kind of betatesters you chose to test your products? For sure are people that are working with light documents of 5... 10 pages and no more.
    For sure are not people working extensively with Adobe Acrobat, as I do.
    And what happens when Acrobat X crash miserably time after time? that the Error 15 comes, because the file becomes corrupted.
    This is not serious.
    Is this the kind of performance and stability that Acrobat provide to the customers? having the risk to lose important documents and data, due how unstable is the program?
    You can tell me you hired NASA personnel to do this program, but customers need results, and crashing the program just pressing one key is not serious.
    And talking about complains I don't want to remember the last update of the Acrobat 9 !!!
    And you know what? a simple tool as NitroPDF don't crash!
    Sadly NitroPDF is not an option for me, because I embed videos in the PDF documents and NitroPDF don't allow me that.
    I am using Adobe Acrobat X because sadly I don't find another alternative, the day I find it, I'll switch for sure.
    Or perhaps we can get a miracle, and your programmers could focus in what is IMPORTANT: STABILITY AND PERFORMANCE.

Maybe you are looking for

  • I used my ipod as a hard drive and now its not opening?

    i had synced some 15 gb music onto my 120 GB ipod for a holiday . In my holiday i took some 5 gb of photos which i decided to backup on my ipod. So i put the Ipod to USB into the computer, the ipod device opened from my computer icon, and i copied an

  • Can't access my SQL DB

    Hi I'm trying to access my azure SQL DB and I can't - I get "there was an error connecting to the server" and then I get this: Authentication:7b9c78a3-1154-4f37-8515-32ef1c4a42d9[Microsoft.SqlServer.MessageText=Login failed for user '[email protected

  • How do I reset my computer password?  I have it written down and it will not work.  This is different than my apple ID

    How do I reset my computer password so I can download software to my computer?  This is different than my apple ID,  I wrote it down but it is not working.  Need help

  • BES required or not for CUMA ?

    Hi, Does any of you have already deployed Cisco Unified Mobile Communicator on blackberry devices? I have a doubt, cisco's docs states that BlackBerry Enterprise server 4.1.6. must be deployed with MDS, only this version is support?? There is no othe

  • Cannot find Entrust Identityguard Mobile on Google Play

    My GooglePlay app cannot find "Entrust Identityguard Mobile" app on the GooglePlay appstore. Comes back with "No results found" Running GooglePlayStore v3.7.15 and Andriod 2.3.3. Also cannot update to latest Google Playstore throught the app. Entrust