Problems reading Mac OS DVDs after installing 10.4.11

OK - I guess I should have read the many posts out there about the problems with this software update. However, I did not and now am encountering two bizarre problems. Perhaps someone out there can help.
I own a Macbook and downloaded 10.4.11 this morning. Everything was running just fine until then. Now I have two problems:
1) it cannot read Mac OS DVDs (neither the new Leopard disks I just got, nor the original backups of 10.4.9 that came with the macbook). The disks are fine and can be read without a problem by my iMac. The drive on the macbook is fine since it can read other DVDs (e.g., iLife 08 DVD, movie DVDs). It seems to be limited to OS 10.4 and 10.5 installation CDs.
2) a smaller but also annoying thing is that my apple-supplied stocks widget is reading wrong stock prices.
Any suggestions? Thanks.
Derrick

Similar Messages

I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?

I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?
After +/- 10 to 15min my connection is gone.
Does anyone have a sollution?

Lots of people are having the same problem, you're not the only one, belieeeeve me.
Just Googling the problem gets you tons of people complaining about the same thing, SOMETHING is up with Lion what wasn't happening with Snow Leopard. i just bought a new Imac and it CAME with Lion, so i started experiencing this internet dropout immediately.
It's been going on for the most of a year it looks like (at least by the dates from the threads i've been reading)
So your best bet is to fiddle with the System Preferences and read what other people have used to make theirs work. i'm doing that myself right now. I already posted a similar thread last night trying to figure out why my connection kept on dropping, i got a reply which linked me to a site. i followed the instructions there, so far so good, but i'm just being cautiously optimistic.
i'm gonna call Apple today and see if they've found anything, though seeing as this is a problem right out of the box there may not be an immediate solution. Good luck hunting for a solution :3
Site:
http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/?utm_source=feed burner&utm_medium=feed&utm_campaign=Feed%3A+osxdaily+%28OS+X+Daily%29&utm_conten t=FaceBook

Problem reading camera raw files after I reinstalled LR4.

Now can't read Nikon 5200 camera raw (nef) files in Develop Mode. Could do so before. Any suggestions?

Thank you all!!!! I was successful in updating!!!!! Appreciate your assistance!
Date: Sun, 3 Nov 2013 06:35:19 -0800
From: [email protected]
To: [email protected]
Subject: Problem reading camera raw files after I reinstalled LR4.
    Re: Problem reading camera raw files after I reinstalled LR4.
    created by JimHess in Photoshop Lightroom - View the full discussion
The file that you downloaded is a self-contained running application that installs the update on your computer. After you download that file, you need to double-click on it and follow the prompts to install it. After it has completed you will have Lightroom 4.4 installed and it will be ready to run. If you are on a Windows computer, the installation will replace your 4.1 installation. If you are on a Mac then you will have both versions installed and you will have to be sure you start the right one.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5810683#5810683
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5810683#5810683
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5810683#5810683. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Photoshop Lightroom at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

HT4356 Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example. What can I do?

Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example.
<E-mail Edited by Host>

It appears what happened is the installer though it was looking at a empty drive and just went ahead and installed.
I of course am assuming here you didn't use Disk Utility to format the drive first before installing, that would wipe out your files and programs for sure.
So what to do, what to do.
Well there is hope for you as long as the drive wasn't Filevaulted.
I'll explain. When a hard drive writes data for the first time to a drive, it starts at the very top and works it's way down.
When OS X was installed the first time, it was at the top of the drive, unless you upgraded then the upgraded OS X could have been written elsewhere.
Now when you just reinstalled OS X, the new OS went on the top of the drive, overwriting any data that was there previously, so what was there you have lost forever which is about 8GB or so. If it was the previous OS there, then your more in luck because only the old OS X was overwritten.
The remaining space on the drive still can have a copy of your files, provided it's not overwritten yet.
It's because when a hard drive deletes data or reformats, it doesn't remove the data off the drive or overwrites it immediately, it's just made so it's SPACE is available for new files to be written there.
So technically one can recover the deleted data off a non-encrypted/scrubbed hard drive with special software.
The way it does this is it reads the 1's and 0's of the files themselves, and through a lot of figuring out, can tell what that file is and what it belongs too.
So what you will have to do is this:
Create a data recovery/undelete external boot drive
or if you don't have the skills, then take it to a local PC/Mac tech and they can do a direct image of the drive and then you can run Data Rescue on it to rebuild your files.

Card reader don't work after installing win 7 ultimate on pavilion dv-6 1260ej

card reader don't work after installing win 7 ultimate on pavilion dv-6 1260ej.
Tried downloading this driver:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-75456-1&cc=il&dlc=he&lc=he&...
still dont work.

Hi,
Download and install the Chipset driver on the link below.
ftp://ftp.hp.com/pub/softpaq/sp45001-45500/sp45041.exe
After the installation has completed, restart the notebook.
Next, download and install the Card Reader driver on the following link.
ftp://ftp.hp.com/pub/softpaq/sp45001-45500/sp45046.exe
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

I am using windows 7 starter,just downloaded itunes 10.5.2,while install getting prompt,cannot read ipodservice.exe,and after install itunes is not read iphone or ipod while plugging in through usb cable. Any ideas ,whats going wrong?

I am using windows 7 starter,just downloaded itunes 10.5.2,while install getting prompt,cannot read ipodservice.exe,and after install itunes is not reading iphone or ipod while plugging in through usb cable. Any ideas ,whats going wrong?

problem solved.
I phone 4s screen froozen

Problem with Rescue and Recovery after installing Norton Internet Security 2010

Hi all.
It's my first time in this forum.
I have a problem, with Rescue and Recovery, after installing Norton Internet Security 2010 on my T43.
The message I get it:
"Rescue and Recovery is unable to back up the file 'C:\Documents and settings\all Users\Application Data\ Norton\ 00000082\00000109\000003c1\cltMLS1.bat' Because the file is either corrupted or being used by another application. Please close any application that could be using the file.
I tried to close the Norton but I couldn't find how.
Tanks
Doron71

Hi and welcome to the forum,
the reason for this situation is, that the antivir files are protected from being modified.
This is the reason, why this file cannot be backed up. I assume, that you would get much more such messages, as there are surelly multiple files files, that are protected like this.
So the solution is to block folders from being archived. Please start RnR application and in the configuration set this folder as the excluded one.
This will skip the backup of this file and will fix your situation.
Please let me know, if you have covered this.
Cheers

IMac G4 superdrive only reads DVDs after install, not CDs-- HELP

I just installed leopard on my iMac G4 and now it only reads DVDs. It will not read CDs. I tried installing iLife and Office from CDs and it does not read them. However, it will play all DVDs just fine. Leopard itself seems to work amazing, only problem so far is the CD issue.
Has anyone else experienced this? Does anyone know how to fix this? I would really like to be able to read CDs as well. Any help is greatly appreciated.
Thanks

ok... so I unplugged it for a couple minutes. Then, booted it back up holding commandoption+pr to refresh the PRAM. This seemed to work when the CD is in the drive. It will read whatever CD is in the Drive. But, if I eject it and then try to reinsert it, it doesn't work anymore. I don't know what is wrong. Do you think that the battery needs to be replaced or something? Can anyone help me?????
Thanks

Installing Mac OS X after installing UBUNTU

Hi,
I have searched the pages and found problems to most of my problems so far, but this one has really got me stuck. I installed UBUNTU (ppc) onto a 12" iBook G4 (not sure about the exact specs). Anyway, it was running fine. It's my friends and she now decides she wants Mac OSX back on it. Problem is when I put the DVD in, its not recognised in UBUNTU (which isnt much of a problem). So when I restart the computer, leave the Mac OSX DVD in, try all the combinations (hold c, or hold option... etc.) I cannot get the Mac OSX installation to start!
When I do this, then UBUNTU's boot thing comes up (l to log into Linux, or c to log into CDROM) and I will press C and nothing will happen (i.e. go back to the same menu).
I ran the UBUNTU setup again, to format the drive again (not sure using what format method?) but then when it started up, the flashing finder/question mark kept coming but didnt go any further (not that I expected it) but the point is there, the DVD didnt startup again! I tried the different combinations again (c... shift... etc.) and no luck and so I have been left with no alternative but to put UBUNTU back on to just be able to use the computer.
Any ideas on how to get MAC OSX back? (I think I have 10.4 if that makes a difference, am an advance PC user but only just got this a 10 days back).
Thanks in advance.
Deepz

You could also try to get into open firmware and boot the DVD from there.
Or download an iso file at a torrent site and burn a new disk or CD 1 to get to the Mac installation program and format the HDD.
Or remove the bootloader (GRUB? Lilo?). The keys at startup are managed by Open Firmware. The bootloader ubuntu uses or ubuntu itself should not be able to change anything about that.
I don't know if it's under warranty, but you can try to remove the drive and then test if the installer disk will boot. Or format it in a different computer and put it back.
What also might work is going to Open Firmware and then enter the command to boot from the installer disk.
You boot into Open Firmware (hold down command-option-O-F while the computer starts up; do that 1 millisec after you pushed the power button from a cold start), hit return. Then at the prompt type:
boot cd:,\\tbxi
and press enter. Don't replce cd with dvd, just type it as it is. Warning! Do not try to use this as a shell or something. When something goes wrong in here, you're screwed.
type mac-boot to boot or type just boot.
eject cd ejects the optical drive, shutdown shuts it down, but pressing the power button once will do that for you. sifting [keyword] will bring up a list of commands close to the keyword, but beware, it's dangerous to play in open firmware.
Link to the command I told: http://litot.es/smr/2006/03/02/boot-from-cd-in-open-firmware/
actually, this is for something different but it'll work in your case.
Did you try the ubuntu forums?

My mac is slow after installing Yosemite

Problem description:
mac slow after upgrade to yosemite
EtreCheck version: 2.1 (101)
Report generated December 4, 2014 at 11:16:26 PM EST
Hardware Information: ℹ️
MacBook Pro (15-inch, Mid 2010) (Verified)
MacBook Pro - model: MacBookPro6,2
1 2.4 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1067 MHz ok
BANK 1/DIMM0
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics - VRAM: 288 MB
Color LCD 1440 x 900
NVIDIA GeForce GT 330M - VRAM: 256 MB
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 1:3:5
Disk Information: ℹ️
TOSHIBA MK3255GSXF disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 318.84 GB (206.05 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 319.21 GB Online
HL-DT-ST DVDRW GS23N
USB Information: ℹ️
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
Gatekeeper: ℹ️
Mac App Store and identified developers
Adware: ℹ️
Geneio [Remove]
Kernel Extensions: ℹ️
/Incompatible Software/Parallels Service.app
[not loaded] com.parallels.kext.prl_hid_hook (7.0 15094.749908) [Support]
[not loaded] com.parallels.kext.prl_hypervisor (7.0 15094.749908) [Support]
[not loaded] com.parallels.kext.prl_netbridge (7.0 15094.749908) [Support]
[not loaded] com.parallels.kext.prl_usb_connect (7.0 15094.749908) [Support]
[not loaded] com.parallels.kext.prl_vnic (7.0 15094.749908) [Support]
/System/Library/Extensions
[not loaded] com.wacom.kext.pentablet (5.2.6) [Support]
Launch Agents: ℹ️
[running] com.brother.LOGINserver.plist [Support]
[invalid?] com.cisco.anyconnect.gui.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[loaded] com.oracle.java.Java-Updater.plist [Support]
[running] com.wacom.pentablet.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[running] com.cisco.anyconnect.vpnagentd.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
User Launch Agents: ℹ️
[invalid?] com.adobe.ARM.[...].plist [Support]
[loaded] com.genieo.completer.download.plist Adware! [Remove]
[loaded] com.genieo.completer.update.plist Adware! [Remove]
[not loaded] info.lokiware.attachmenttamer.cleanup.plist [Support]
[invalid?] info.lokiware.attachmenttamer.setupagent.plist [Support]
User Login Items: ℹ️
FreeScreenSharing Application (/Users/[redacted]/Desktop/FreeScreenSharing.app)
Dropbox ApplicationHidden (/Applications/Dropbox.app)
Internet Plug-ins: ℹ️
2XClient: Version: Unknown
FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 [Support]
JavaAppletPlugin: Version: Java 7 Update 65 Check version
Flash Player: Version: 15.0.0.239 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 [Support]
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Support]
iPhotoPhotocast: Version: 7.0 - SDK 10.8
userinternetplugins ℹ️
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Support]
FreeScreenSharingPlugin: Version: Unknown - SDK 10.9 [Support]
Safari Extensions: ℹ️
OpenIE
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Flip4Mac WMV [Support]
Java [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      14% mds
      4% WindowServer
      0% fontd
      0% AppleSpell
      0% Dropbox
Top Processes by Memory: ℹ️
185 MB mds_stores
137 MB Finder
129 MB Mail
125 MB WindowServer
116 MB Safari
Virtual Memory Information: ℹ️
354 MB Free RAM
2.00 GB Active RAM
948 MB Inactive RAM
855 MB Wired RAM
1.78 GB Page-ins
213 KB Page-outs
Diagnostics Information: ℹ️
Dec 4, 2014, 10:13:56 PM Self test - passed

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA$|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Mac crashes regularly after installing new RAM

My laptop crashes at least once a day ever since installing new RAM. It seems to be triggered by quitting programs, usually Firefox, Logic or Spotify. There was nothing else connected to the Mac that brought about the latest crash but I do use an Mbox 2 on a regular basis.
Below is the last crash report and also the RAM profile. It's Kingston brand if that means anything.
*_Crash Report:_*
Interval Since Last Panic Report: 55868 sec
Panics Since Last Report: 1
Anonymous UUID: AEEF5666-4C4E-4FC1-AC7A-5A500F952BF9
Sat Jan 22 00:00:25 2011
panic(cpu 1 caller 0x2aab55): Kernel trap at 0x8b042474, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x8b042474, CR3: 0x00100000, CR4: 0x00000660
EAX: 0x09947100, EBX: 0x09ad4a00, ECX: 0xe15f0000, EDX: 0x0a133800
CR2: 0x8b042474, EBP: 0x5294bb68, ESI: 0x08bd7f40, EDI: 0x0085f838
EFL: 0x00010246, EIP: 0x8b042474, CS: 0x00000008, DS: 0x03450010
Error code: 0x00000010
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x5294b968 : 0x21b50c (0x5d42fc 0x5294b99c 0x223974 0x0)
0x5294b9b8 : 0x2aab55 (0x59616c 0x8b042474 0xe 0x596336)
0x5294ba98 : 0x2a09a8 (0x5294bab0 0x246 0x5294bb68 0x8b042474)
0x5294baa8 : 0x8b042474 (0xe 0x48 0x52940010 0x230010)
0x5294bb68 : 0x1854f8f (0x9ad4a00 0x0 0x5294bbf8 0x60)
0x5294bb88 : 0x4ff5ae (0x9ad4b00 0x85f838 0x1 0x0)
0x5294bba8 : 0x50f6e0 (0x9ad4b00 0x85f838 0x5294bbd8 0x4ff931)
0x5294bbd8 : 0x50f854 (0x8bd7f40 0x0 0x1 0x0)
0x5294bbf8 : 0x4ff5ae (0x8bd7f40 0x0 0x1 0x1)
0x5294bc18 : 0x4ff5c9 (0x8bd7f40 0x0 0x5294bc48 0x4ff5ae)
0x5294bc38 : 0x531e12 (0x8bd7f40 0xffff 0x8bd4f84 0x4ff5c9)
0x5294bc58 : 0x531e45 (0x8bd4f80 0x246 0x5294bc98 0xb18e540)
0x5294bc78 : 0x4ff5ae (0x8bd4f80 0x0 0x1 0x1e)
0x5294bc98 : 0x4ff5c9 (0x8bd4f80 0x0 0x5294bce8 0x0)
0x5294bcb8 : 0x2844eb (0x8bd4f80 0xb18e540 0x1e 0x5294bce8)
0x5294bd08 : 0x21d8d1 (0xa088398 0xb2555a0 0x997aa24 0x1)
0x5294bd48 : 0x210a3a (0xa088300 0x12 0x5294bda8 0x20f45c)
0x5294bda8 : 0x21dda0 (0xa088300 0x10000 0x0 0x2107c2)
0x5294bdd8 : 0x23f567 (0x5294bdfc 0x24 0xa4289e4 0x0)
0x5294be28 : 0x214f6f (0xb18e540 0x1 0x1 0x221bb4)
0x5294be78 : 0x215581 (0x7fc7420 0x33303 0x43dfe330 0x8f1e1f4)
0x5294beb8 : 0x22c521 (0x7fc7420 0xc971640 0x5294bf08 0x47a0f3)
0x5294bf08 : 0x47ab28 (0x8f1e1f4 0x0 0x0 0x2ea2)
0x5294bf58 : 0x47ab56 (0x8f20000 0x0 0xc971684 0x0)
0x5294bf78 : 0x4f0f7d (0x8f20000 0xc971640 0xc971684 0x0)
0x5294bfc8 : 0x2a0ef8 (0xa1916c0 0x1 0x10 0xa194964)
Kernel Extensions in backtrace (with dependencies):
com.digidesign.mbox2.driver(8.0.0f1)@0x184e000->0x1871fff
dependency: com.apple.iokit.IOAudioFamily(1.7.9fc4)@0x90c000
dependency: com.apple.iokit.IOUSBFamily(4.1.7)@0x1232000
dependency: com.apple.driver.AppleUSBMergeNub(4.1.5)@0x1292000
dependency: com.apple.kext.OSvKernDSPLib(1.3)@0x908000
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x948000
dependency: com.apple.driver.AppleUSBComposite(3.9.0)@0x1266000
BSD process name corresponding to current thread: Spotify
Mac OS version:
10H574
Kernel version:
Darwin Kernel Version 10.5.0: Fri Nov 5 23:20:39 PDT 2010; root:xnu-1504.9.17~1/RELEASE_I386
System model name: MacBook7,1 (Mac-F22C89C8)
System uptime in nanoseconds: 10016535514139
unloaded kexts:
com.apple.driver.AppleMCP89RootPortPM 1.11 (addr 0x11cd000, size 0x20480) - last unloaded 250987080117
loaded kexts:
com.digidesign.mbox2.driver 8.0.0f1 - last loaded 49888220612
com.rogueamoeba.hermes 2.0.2
com.paceap.kext.pacesupport.snowleopard 5.7.2
com.Cycling74.driver.Soundflower 1.5.1
tc.tctechnologies.driver.PaeFireStudio 8028
com.digidesign.iokit.DigiIO 8.0.0f1
com.digidesign.iokit.DigiDal 8.0.0f1
com.apple.driver.AppleHWSensor 1.9.3d0
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AGPM 100.12.19
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.driver.AppleMikeyDriver 1.9.9f12
com.apple.driver.AudioAUUC 1.13
com.apple.driver.AppleUpstreamUserClient 3.4.5
com.apple.driver.AppleMCCSControl 1.0.17
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.driver.AppleHDA 1.9.9f12
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.AppleIntelPenrynProfile 17
com.apple.driver.ACPISMCPlatformPlugin 4.5.0d5
com.apple.driver.AppleLPC 1.4.12
com.apple.driver.AppleBacklight 170.0.34
com.apple.GeForce 6.2.4
com.apple.driver.AppleUSBTCButtons 200.3.2
com.apple.driver.AppleUSBTCKeyboard 200.3.2
com.apple.iokit.SCSITaskUserClient 2.6.5
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.IOAHCIBlockStorage 1.6.3
com.apple.driver.AppleHPET 1.5
com.apple.driver.AirPortBrcm43224 426.36.1
com.apple.driver.AppleAHCIPort 2.1.5
com.apple.driver.AppleUSBHub 4.1.7
com.apple.nvenet 2.0.15
com.apple.driver.AppleUSBEHCI 4.1.7
com.apple.driver.AppleUSBOHCI 4.1.5
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleACPIButtons 1.3.5
com.apple.driver.AppleSMBIOS 1.6
com.apple.driver.AppleACPIEC 1.3.5
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 105.13.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagement 105.13.0
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.driver.AppleSMBusController 1.0.8d0
com.apple.driver.DspFuncLib 1.9.9f12
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.3.8f7
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.7.9fc4
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 1.9.9f12
com.apple.iokit.IOHDAFamily 1.9.9f12
com.apple.driver.AppleSMBusPCI 1.0.8d0
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleSMC 3.1.0d3
com.apple.driver.IOPlatformPluginFamily 4.5.0d5
com.apple.nvidia.nv50hal 6.2.4
com.apple.NVDAResman 6.2.4
com.apple.iokit.IONDRVSupport 2.2
com.apple.iokit.IOGraphicsFamily 2.2
com.apple.driver.BroadcomUSBBluetoothHCIController 2.3.8f7
com.apple.driver.AppleUSBBluetoothHCIController 2.3.8f7
com.apple.iokit.IOBluetoothFamily 2.3.8f7
com.apple.driver.AppleUSBMultitouch 206.6
com.apple.iokit.IOUSBHIDDriver 4.1.5
com.apple.driver.AppleUSBMergeNub 4.1.5
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.5
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCISerialATAPI 1.2.5
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.5
com.apple.iokit.IO80211Family 312
com.apple.iokit.IOAHCIFamily 2.0.4
com.apple.iokit.IOUSBUserClient 4.1.5
com.apple.iokit.IONetworkingFamily 1.10
com.apple.driver.NVSMU 2.2.7
com.apple.iokit.IOUSBFamily 4.1.7
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.5
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 289
com.apple.iokit.IOStorageFamily 1.6.2
com.apple.driver.AppleACPIPlatform 1.3.5
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacBook7,1, BootROM MB71.0039.B0B, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.60f5
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.36.1)
Bluetooth: Version 2.3.8f7, 2 service, 12 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: TOSHIBA MK2555GSXF, 232.89 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06600000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8218, 0x06630000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0237, 0x06300000
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0x24600000
*_Memory Profile_*
Memory Slots:
ECC: Disabled
BANK 0/DIMM0:
Size: 2 GB
Type: DDR3
Speed: 1067 MHz
Status: OK
Manufacturer: 0x0000
Part Number: 0x000000000000000000000000000000000000
Serial Number: 0x00000000
BANK 1/DIMM0:
Size: 2 GB
Type: DDR3
Speed: 1067 MHz
Status: OK
Manufacturer: 0x0000
Part Number: 0x000000000000000000000000000000000000
Serial Number: 0x00000000

It's almost impossible to trace back the panic report to a specific cause, but it's highly suspicious that you started experiencing problems after installing new RAM.
It's also strange that your RAM has no stated VendorID, Part Number or Serial Number.
I would return this memory poste haste.
Alternatively, if the DIMMs are from Kingston's ValueRAM range, just dump them in the garbage because that's where they belong. While you're there, look for any other RAM that someone else has thrown away - chances are its ValueRAM, too (hint: I have never seen a single ValueRAM DIMM work in any of my systems, so I avoid them like the plague - shame, since Kingston used to have such a good reputation).

Problem with Itunes and NAS after installing latest version of Itunes

After installing the latest version of Itunes on my new PC (Windows 7 Ultimate) I have problems seeing the music off the Itunes server on my NAS.
I see the name of the NAS under tab SHARED (GEDEELD in dutch), but when I click on it, Itunes is making connection with the NAS but I see the music for less then a second.
Then the display goes back to the tab LIBRARY.
I've searched the web for this problem, checked on my firewall,... nothing to find. On another windows 7 PC, it is still working fine but this is an older version of Itunes.
So what can be the problem ?

No, I had not uninstalled it, I didn't realize I had ever installed it. I don't use it at all, never have. I uninstalled the MobileMe Control Panel then restarted my computer for good measure, and that appears to have resolved the issue! Thanks very much for your help!

Problem with getting PDF Options after installing Acrobat Pro 8.0

Hello
I have some problems after installing Acrobat Pro 8.0 on my MacBook Pro.
In the past I worked with Acrobat Pro 7.0.8. Then when I choose the printer Adobe PDF 7.0 I had always a pulldown menu in the Printer Settings. to decided what kind of PDF I want (Best Quality, PDF/1, PDF/3, Low Quality, etc)
After Intallion Acrobat Pro 8.0, I had both Adobe PDF 7.0 & 8.0 availible in the Printer Menu, but either the PDF Options is not availible for both (in some programs) or for both it is visible as "AdobePDFPDE70" but it has a line through it and I cann't select it.
Then I delete Adobe 7.0 & 8.0 from the folder "/usr/libexec/cups/backend/" and started Adobe Acrobat Pro 8.0 again. It recognised that an Adobe PDF need to be installed but again it is not availible or AdobePDFPDE70 has a line through.
I have still installed Adobe Pro 7.08 on my MacBook Pro because their is no PitStop Professional availible for Adobe Acrobat 8.0
Who can help me to make my PDF Options Availible. I also looked at the Adobe Site for a Solutions but I found only 4 Threads for Acrobat 8 in combination with OS X and it was regarding other problems.
I work with German OS X and german Versions of Acrobat and PitStop
Regards
Gerard
MacBook Pro 17" Mac OS X (10.4.8)

Hello
I solved the problem. The files "AdobePDFPDE700.plugin" & "AdobePDFPDE800.plugin" conflict each other.
I solved it in the following way
- quit Adobe Acrobat
- delete Adobe PDF 7.0 & 8.0 From the Printer Manager
- remove the file "AdobePDFPDE700.plugin" & "AdobePDFPDE800.plugin" from /Library/Printers/PPD Plugins/
- restart Adobe Acrobat Pro 8.0 and activate its self repair function from within the Help menu
- quit Acrobat and re-boot your Mac
- a Printer & "Adobe PDF 8.0" will be availible. Now the PDF Options are availible in all the Programs I working with!
I experienced that the Acrobat Pro 7.08 is very unstabil after the Installation of 8.0, let's hope that PitStop will bring very soon a new Version compatible with Acrobat 8.0

Problems conecting to wireless network after installing Lion

Has anyone had problems conecting to thier wirless network after installing lion.

Has anyone had problems conecting to thier wirless network after installing lion.

Problem with Exchange 2010 scripts after installing PowerShell 4.0

Hi
After installing new updates for MS Exchange 2010 and PowerShell 4.0 I've got problems with PS scripts using buil-in
exchange commands.
I wrote interactive script for searching e-mails. Here is a pice of code where I get error after installing PS v4.
$SearchContent=Read-Host "Write sentence to find"
Get-Mailbox | Search-Mailbox -SearchQuery "$SearchContent" -TargetMailbox "Discovery Search Mailbox" -TargetFolder "Inner box" -LogOnly -Loglevel Full | Out-Null
After installing PowerShell 4.0 I get that bug and report in TargetMailbox is not genereated.
The property keyword isn't supported.
At C:\Administration\Scripts\T-SearchMail.ps1:122 char:1
+ Get-Mailbox | Search-Mailbox -SearchQuery "$SearchContent" -TargetMailbox "Disco ...
+ ~~~~~~~~~~~~~~~~~
+ CategoryInfo          : InvalidArgument: (:) [], ParserException
    + FullyQualifiedErrorId : 35E6C841
Using PowerShell 2.0 everything was ok.
How to solve this problem?
Tomasz
Kind Regards Tomasz

But http://blogs.msdn.com/b/powershell/archive/2013/10/25/windows-management-framework-4-0-is-now-available.aspx is dated
October 2013, while the current Windows Management Framework 4.0 System Requirements section states:
Servers that are running the following applications can now run WMF 4.0. The versions listed are the minimum releases required to run WMF 4.0.
Microsoft Exchange Server 2013 Service Pack 1
Microsoft Exchange Server 2010 SP3 with Update Rollup 5
Since
Update Rollup 5 For Exchange 2010 SP3 (KB2917508) was published Febrary 2014, shouldn't Exchange 2010 now be compatible with PowerShell 4.0?

Problems reading Mac OS DVDs after installing 10.4.11

Similar Messages

Maybe you are looking for