Problems reading SRM Guid throught PI proxy interface
Hi all,
I'm facing the following problem: I have to adapt an existing PI interface between SRM4.7 and a legacy system to the new environment in which there is a SRM7.01 and the same legacy system.
I need also to have the two configurations working together for a certain period.
The communication between PI and SRM is proxy (for SRM4.7 either for SRM7.01).
On PI side has been defined a custom outbound interface MT_Rda_From_Srm with Rda fields, where the field GUID is of type base64Binary.
Unfortunately the behavior of the field GUID is different in the two environments: this field is filled different when the abap proxies pass the RDA GUID. I think this is due to the fact that in SRM4.7 the GUID of the EXECUTE_SYNCHRONOUS method of the outbound interface is treated as string while in SRM7.01 the GUID is treated as rawstring.
Debugging abap custom code the value of the GUID appears as a string, while if I look the message in SXMB_MONI the Guid is string in SRM4.7 and it has a value like
<GUID>TKo6ZBHYAVDhAIAAChAZZg==</GUID> in SRM7.01.
So, when I have to pass this value to the legacy system, it does not correspond to the real value of Rda GUID.
I would like to not change the PI mapping to differentiate the behaviour according to the SRM that sends the Rda data...does anyone know if there is a standard way to work with this kind of data?
thanks for your help,
Luciana Agostini
Hi,
tnx 4d reply...
SRM 7.0 contains 2 clients:
Sender: 100 for EBP, logical system is CLNT100
Receiver: 200 for SUS, logical system is CLNT200
both the clients are connected through PI 7.0, logical system of PI is CLNT001.
From SPROXY of 100EBP, i'm executing the outbound proxy, in moni sent msg success.
In PI also msg is processed.
As U asked me to chk... SPRO settings in "Define Backend Systems"..... in which client i've to chk this... & what values needs to be maintained der.... can u pls tell me....
SPRO->SRM->SRM Server->Technical Basis Settings-> Settings for Supplier Synch--> Define Settings for each backend system.
click help icon... in that " Define Backend Systems "
the following data is maintained in 200:
Logical System: CLNT100
Dexcriptn: Local EBP
RFC Destination: CLNT100
System type: EBP_ONE
RFC: tick checked
Local: tick not checked
FI valid: real-time backend validation
Logical System: CLNT200
Dexcriptn: Local SUS
RFC Destination: CLNT200
System type: SUS_ONE
RFC: tick not checked
Local: tick checked
FI valid: real-time backend validation
& in SPRO->SRM->SRM Server->Technical Basis Settings-> Settings for Supplier Synch--> Define Settings for each backend system.
execute
nothing is maintained.
In which client what needs to maintain pls tell me...
& also what is the value to give in SLD System name field.
Pls help in resolving the same....
tnx n rgds,
balu
Similar Messages
-
Problem in registering the java server proxy interface...
Hi All,
I have created a java server proxy(in PI 7.1) using the below mentioned blog:
/people/prasad.ulagappan2/blog/2005/06/27/asynchronous-inbound-java-proxy
But the problem comes when i am trying to register the interface( on non central j2ee adapter engine) and ends up with getting unauthorization error even though i am having piappluser access. I am trying to register it using below mentioned URL:
http://ISVSAPPISB:51000/ProxyServer/register?ns=xxxxx&interface=SI_Proxy_IA&bean=localejbs/sap.com/EARServerProxy/SIProxyIA_PortTypeBean&method= sIProxyIA
xxxx-namespace
So ,please anyone can tell me what authorization should i have in order register my server proxy interface.
Thankshi,
>>>2) Plz tell me how to check whether my java server proxy interface got registered successfully or not.
use listAll option form this page:
http://help.sap.com/saphelp_nw04/helpdata/en/a4/d5b3b0b16843b3867c0245d9847ae5/content.htm
Regards,
Michal Krawczyk -
RFC connection problem during SRM - R/3 integration
Hi,
Our environment is SRM 5.5 server with 2 R/3 backend systems. One of the R/3 systems is in another country. We happen to have RFC problems during the communication between the SRM and R/3 server.
Below you can find the SM21 log related to an operation on SRM server. What might be the reason for this problem? Does anyone know the solution?
Many thanks
Details Page 2 Line 26 System Log: Local Analysis of sapsrmt 1
Time
Type
Nr
Clt
User
TCode
Grp
N
Text
10:24:58
DIA
000
013
EMREK
R4
9
Communication error, CPIC return code 020, SAP return code 223
Communication error, CPIC return code 020, SAP return code 223
Details
Recording at local and central time........................ 07.12.2006 10:24:58
Task......
Process
User......
Terminal
Session
TCode
Program
Cl
Problem cl
Package
91342
Dialog work process No. 000
EMREK
XXXXXXXX
2
K
SAP Web AS Problem
STSK
Further details for this message type
Module nam
Line
Error text
Caller....
Reason/cal
thxxhead
7192
020223
ThRecei
CPIC-Er
Documentation for system log message R4 9 :
A CPIC function has failed. The conversation ID and CPIC function are
specified in the system log entries. Use the conversion ID to find more
detailed information about the error in the system log for the SAP
gateway.
Meaning of the SAP return codes:
1) Gateway errors:
221,,Error in CPIC-SS
222,,Storage bottleneck
223,,Network read error
224,,Network write error
225,,Invalid request
226,,No connection yet
227,,Gateway process terminated
228,,Shared-Memory problem(read)
229,,Shared Memory problem(write)
230,,No free LU
231,,No free gateway process
232,,Error when starting gateway proc.
233,,Incorrect communication type
234,,Connection setup failed
235,,Error in comm. table
236,,No connection to gateway
237,,Connection to gateway closed
238,,Error in GW command (write)
239,,Error in GW comm. (read)
240,,Invalid length
241,,Invalid environment
242,,Timeout
243,,Error setting up SAP connection
244,,Partner has closed connection
245,,Storage overflow
246,,Incorrect APPC header version
247,,APPC server not started
248,,Error accessing TXCOM
249,,Comm. table is full
630,,Invalid mode no. received
631,,Max.no. of gateways reached
632,,No LU specified
633,,Max.no. of clients reached
634,,Invalid TP name
635,,fork failed
636,,Invalid NI handle
637,,rexec failed
638,,TP start failed
639,,NiDgSend failed
640,,Internal error
664,,Gateway host is unknown
665,,Gateway service unknown
666,,NI error
667,,exec failed
668,,R/2 restarted
669,,Symb. destination too long
670,,No more side-info entries
672 ,,Logon to NetWeaver failed
673 ,,IMS Error Purging
674 ,,Timeout for registered programs
676 ,,TP not registered
677 ,,Timeout for registered programs
678 ,,TP is registered
679 ,,TP is not registered
720 ,,Security breach of registered programs
721 ,,SNC deactivated
722 ,,SNC required
723 ,,SNC name not defined
724 ,,Default SNC name not permitted
725 ,,Protocol does not support SNC
726 ,,No local SAP System
727 ,,SNC required
728 ,,Conversation ID not found
729 ,,SNS must do the communication
730 ,,Start of external programs deactivated
731 ,,Gateway shut down
732 ,,No external programs
733 ,,Conversation ID does not match
734 ,,Net conversation error
735 ,,Monitor is not active
736 ,,Conv-ID is not unique
Errors in the CPIC Interface:
450 ,,No storage
451,,No side-info entry
452,,TP-START failed
453,,No initialization
454,,"getlu" failed
455,,"signal" failed
456,,Timeout during conn. setup
457,,CMALLC failed
458,,CMSEND failed
459,,Prepare-To-Receive failed
460,,"mc_flush" failed
461,,CMRCV failed
462,,Argument missing
463,,"get_allocate" failed
464,,CMDEAL failed
465,,TP-END failed
466,,Max.no.of conv. reached
467,,"snaopen" failed
468,,"snactl" failed
469,,No flush in IBM environment
470,,"snaclse" failed
471,,Status error
472,,No side-info entry
473,,No conversation
474,,Connection closed manually
475,,Connection closed automatically
476,,No partner found
477,,Confirm failed
478,,Confirmed failed
479,,GWHOST not in side-info entry
480,,GWSERV not in side-info e.
481,,PROTOCOL not in side-info entry
482,,LU not in side-info e.
483,,TP not in side-info entry
484,,No conn.to gateway
485,,gethostname failed
486,,SAP_CMACCP not executed
487,,Program not in argument list
488,,Host not in argument list
489,,Service not in argument list
490,,Conv-ID not in argument list
491,,Invalid parameter
492,,LU62CVCT failed
493,,LU62ATTCH failed
494,,No CONV table
495,,Incorrect conv.table
496,,Invalid conv modification
497,,NiHostToAddr failed
498,,NiAddrToHost failed
499,,Read operation tab.THOST failed
500 ,,No side info file exists
501 ,,CMRCV failed
Technical details
File
Offset
RecFm
System log type
Grp
N
variable message data
6
245700
m
Error (Function,Module,Row)
R4
9
020223 ThReceiCPIC-Erthxxhead7192Hi,
It will be very difficult to solve without being on the customer site and having all information.
Right now, the error code is network error...
Kind regards,
Yann -
Developing AIF Inbound Synchronous Proxy interface
Hello! I'm trying to develop simple AIF Inbound Synchronous Proxy interface, but there is absolutely no information about it. Cookbook just covers async interfaces.
So, I just have Inbound sync ABAP-Proxy. I developed inbound AIF interface, entered the inbound proxy class. My interface is working, FM in Action is calling and works correctly.
But, I have two problems:
1) I don't understand, how should I get back a response to the Proxy?
2) I can't see a payload of my interface in AIF Monitoring.
SP level of AIF is 04.
Thank you in advance.1) I don't understand, how should I get back a response to the Proxy?
I really want to know how did you implement in you proxy class. In general, if you call /aif/cl_enabler_proxy=>process_message, this doesn't support your synchronous interface.
My idea is, in proxy class, you could call CALL FUNCTION '/AIF/FILE_PROCESS_DATA' to process your input request and add you own coding to get back a response or another function module /AIF/FILE_TRANSFORM_DATA to transform your own SAP data to your response data structure(This need you to define another outbound interface and mapping).
Brecht is right, this is similar to his outbound synchronous interface.
You could refer to function module /AIF/SEND_WITH_PROXY. This function module is designed to support synchronous outbound interface
2) I can't see a payload of my interface in AIF Monitoring.
If you want to see input and output structure in Error Handling, I think you need to use XML persistency engine to save your own payload and save this payload via class /aif/cl_persist_engine_xml method /aif/if_persistency_engine~update.
This also could be found in function module /AIF/SEND_WITH_PROXY for example.
Best Regards,
Eric. -
Outlook anywhere testconnectivity error RPC 6004 (NSPI Proxy Interface)
Greetings, community!
We have next Exchange configuration:
Exchange Server 2007 (With last RU) on Windows Server 2008R2. All roles, except Edge, are on this server.
So, we have published OWA, ActiveSync successfully through ISA Server 2004. Testconnectivity tells us that all is correct and it's true)
But we have strange problem with RPC over HTTPS:
Testconnectivity tells us:
RPC 6004 (NSPI Proxy Interface) and RPC_S_SERVER_UNAVAILABLE (0x6ba) in the details.
We have already use all receipts from http://blogs.technet.com/b/exchange/archive/2008/06/20/3405633.aspx and http://www.tech-archive.net/Archive/Exchange/microsoft.public.exchange.setup/2004-07/1151.html articles.
Enabling expert auditing of NSPI Proxy on Exchange server shows warning when Testconnectivity try to connect:
NSPI Proxy listener thread (ID: 0xfec) could not connect to the server on transport . The winsock subsystem returned error code:[0xRpc/HTTP].
RPCPING utility tells us:
Exception 1722 (0x000006BA)
Number of records is: 2
ProcessID is 6696
System Time is: 2/8/2014 13:27:0:552
Generating component is 14
Status is 0x6BA, 1722
Detection location is 1398
Flags is 0
NumberOfParameters is 2
Long val: 0x4
Long val: 0x6ba
ProcessID is 6696
System Time is: 2/8/2014 13:27:0:552
Generating component is 13
Status is 0x6BA, 1722
Detection location is 1418
Flags is 0
NumberOfParameters is 0
Out DC controllers are listening 6004 port. And Exchange server successfully connect with DC with information message:
NSPI Proxy successfully connected to the NSPI Service on server DC.FQDN.NAME at endpoint 6004 on RPC protocol sequence ncacn_http.
Additional information:
Outlook 2003/2007/2010 can't connect to our Exchange through RPC/HTTPS. But Outlook 2013 do it without any problems!
I don't know where I can continue to dig)Hi, Sathish!
Thank you for reply.
Service is started and IPv6 is disabled. Do you mean SRV-record for autodiscover? We don't use it for external users. We publish Autodiscover same way as Owa and it works correct (interconnectivity).
I enable Expert level audit for NSPI Proxy and there is error:
Source: MSExchangeSA
EventID: 9040
NSPI Proxy encountered an error while receiving a packet. The target Domain Controller or the network or a client might be down. The winsock subsystem returned the error:[0x2746]. The circuit that received this error is being closed.
But DC is online and available. I'll reboot server tonight because I think there is a little trouble after disabling additional NIC. -
Problem in Configuring the Object Editor User Interface
Hi,
I m using NetWeaver 7.0.11 & facing the problem in Configuring the Object Editor User Interface.In the Configuration Browser ,when i click on Object Editor & choose New Configuration & try to select service,it shows the flollowing error:
com.sap.caf.rt.exception.CAFBaseRuntimeException: Service manager initialization failed Illegal argument exception: Unable to create javax.ejb.EJBObject.
at com.sap.caf.rt.ui.cool.generic.ServiceFacade.init(ServiceFacade.java:121)
at com.sap.caf.rt.ui.cool.generic.ServiceFacade.<init>(ServiceFacade.java:50)
at com.sap.caf.rt.ui.cool.generic.ServiceFacadeFactory.getFacadeInstance(ServiceFacadeFactory.java:51)
at com.sap.caf.ui.utils.cool.CoolUtils.getServiceFacade(CoolUtils.java:123)
at com.sap.caf.ui.ptn.objecteditor.ObjectEditorCC.getServiceFacade(ObjectEditorCC.java:505)
at com.sap.caf.ui.ptn.objecteditor.wdp.InternalObjectEditorCC.getServiceFacade(InternalObjectEditorCC.java:245)
at com.sap.caf.ui.ptn.objecteditor.config.OEconfiguratorLayout.onActionSelectModule(OEconfiguratorLayout.java:322)
at com.sap.caf.ui.ptn.objecteditor.config.wdp.InternalOEconfiguratorLayout.wdInvokeEventHandler(InternalOEconfiguratorLayout.java:300)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:759)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:712)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:261)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Can anybody please tell,what can be the problem?
regards
SumitHello Sumit
This is most probably the result of metadata corruption on runtime.
A possible workaround for this situation is:
Undeploy all the metadata DCs of all the CAF applications you have
deployed (these are the components which names end on "/metadata", excl.
caf/core/metadata and caf/tc/metadata (which are part of CAF itself)).
And then deploy the CAF applications again.
Regards,
Désiré -
HelloThank's for your helpsI hope this document is helpfulBest Regards,
Date: Sun, 22 Jun 2014 17:10:17 -0700
From: [email protected]
To: [email protected]
Subject: when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help me th
when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help m
created by Anoop9178 in Adobe Reader - View the full discussion
Hi,
Would it be possible for you to share the document?
Regards,
Anoop
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6485431#6485431
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Reader by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.thank's for reply and your help
i did the step's that you told me but i still have the same problem
i have the latest v.11.0.7
i
i disable the protected mode -
Problem reading RFC values from IRecordSet !!!!
Hi All,
I am having some problem reading values from IRecordSet. Can not seem to parse the output structure from RFC. AM using connector gateway service to execute BAPI_EXCHRATE_GETCURRENTRATES.
Here is the code,
MappedRecord input = rf.createMappedRecord("input");
input.put("DATE",new String("01011990"));
input.put("DATE_TYPE", new String("V"));
input.put("RATE_TYPE", new String("M"));
MappedRecord output = (MappedRecord) ix.execute(ixspec, input);
Object rs = null;
IRecordSet recSet = null;
Object result = output.get("EXCH_RATE_LIST");
if (result == null) {
response.write("<BR>null");
rs = new String(" ");
} else if (result instanceof IRecordSet) {
IRecordSet irs = (IRecordSet) result;
response.write("<BR>Got some dataaa");
IRecordMetaData rsmd = null;
rsmd = irs.retrieveMetaData();
irs.beforeFirst();
while(irs.next()){
response.write("Row::"+irs.getString("RATE_TYPE")+" "+irs.getString("FROM_CURR")+" "+irs.getString("EXCH_RATE"));
Am getting the pritn statement, Got Some Data on the PDK component.
But somehow not able to read the values from IRecordSet
What is the mistake here?
Pls help
Edited by: Aakash Jain on Oct 11, 2008 12:22 AMHi
Try in this way.
IRecordSet resultTable = (IRecordSet)outputParams.get("TABLE_NAME");
for(resultTable.beforeFirst(); resultTable.next(); ) {
response.write(resultTable.getString(0));
response.write(resultTable.getString(1));
Thanks -
S.O.S. - I have a problem reading an XML to save it in a database
I have a problem reading an XML I trying to save the data in a database. In a log cuardo the message as text and is correct, but I do not type in the database
Glassfish give me this error in the log:
HTTPBC-E01052: The value set on the org.glassfish.openesb.address.url normalized message property is invalid. This property is expected to be of String type only.
Accepted the message in DBBC Binding. 99574032187979-45019-134439471876390116
Accepted message with exchange ID 99574032187979-45019-134439471876390116 in DBBC outbound message processor.
Accepted message with exchange ID 99574032187979-45019-134439471876390116 in DBBC outbound message processor.
Pattern for exchange Id 99574032187979-45019-134439471876390116 is http://www.w3.org/2004/08/wsdl/in-out.
Gettin bean for {http://j2ee.netbeans.org/wsdl/bd}serviceport
Adding reply listener for messsage exchange:99574032187979-45019-134439471876390116
Received in-out message 99574032187979-45019-134439471876390116.
Using Jndi Name:: jdbc/logger
Executing SQL....insert into dbo.appender (timestamp,mensaje) values (?,?)
BPCOR-6151:The process instance has been terminated because a fault was not handled; Fault Name is {http://docs.oasis-open.org/wsbpel/2.0/process/executable}selectionFailure; Fault Data is null
com.sun.jbi.engine.bpel.core.bpel.exception.StandardException: BPCOR-6174:Selection Failure occurred in BPEL({http://enterprise.netbeans.org/bpel/MapeoPedidosEntrada/MapeoPE}MapeoPE) at line 39
BPCOR-6129:Line Number is 37
BPCOR-6130:Activity Name is Assign1
at com.sun.jbi.engine.bpel.core.bpel.engine.impl.BPELInterpreter.createVirtualFaultUnit(BPELInterpreter.java:234)
at com.sun.jbi.engine.bpel.core.bpel.engine.impl.BPELInterpreter.execute(BPELInterpreter.java:202)
at com.sun.jbi.engine.bpel.core.bpel.engine.BusinessProcessInstanceThread.execute(BusinessProcessInstanceThread.java:98)
at com.sun.jbi.engine.bpel.core.bpel.engine.impl.BPELProcessManagerImpl.process(BPELProcessManagerImpl.java:1046)
at com.sun.jbi.engine.bpel.core.bpel.engine.impl.EngineImpl.process(EngineImpl.java:278)
at com.sun.jbi.engine.bpel.core.bpel.engine.impl.EngineImpl.process(EngineImpl.java:1293)
at com.sun.jbi.engine.bpel.BPELSEInOutThread.processStatus(BPELSEInOutThread.java:590)
at com.sun.jbi.engine.bpel.BPELSEInOutThread.processMsgEx(BPELSEInOutThread.java:292)
at com.sun.jbi.engine.bpel.BPELSEInOutThread.run(BPELSEInOutThread.java:193)
normalized message
Finished processing outbound messages.
Accepted the message in DBBC Binding. 99574032187979-45019-134439471876390116
Accepted message with exchange ID 99574032187979-45019-134439471876390116 in DBBC outbound message processor.
Accepted message with exchange ID 99574032187979-45019-134439471876390116 in DBBC outbound message processor.
Pattern for exchange Id 99574032187979-45019-134439471876390116 is http://www.w3.org/2004/08/wsdl/in-out.
Gettin bean for {http://j2ee.netbeans.org/wsdl/bd}serviceport
Adding reply listener for messsage exchange:99574032187979-45019-134439471876390116
Received in-out message 99574032187979-45019-134439471876390116.
Finished processing outbound messages.
I take data from a XML and I put in two tables in a database. I do not understand what it is the problem.
The main BPEL is this:
<?xml version="1.0" encoding="UTF-8"?>
<process
name="MapeoPE"
targetNamespace="http://enterprise.netbeans.org/bpel/MapeoPedidosEntrada/MapeoPE"
xmlns="http://docs.oasis-open.org/wsbpel/2.0/process/executable"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:sxt="http://www.sun.com/wsbpel/2.0/process/executable/SUNExtension/Trace"
xmlns:sxed="http://www.sun.com/wsbpel/2.0/process/executable/SUNExtension/Editor"
xmlns:tns="http://enterprise.netbeans.org/bpel/MapeoPedidosEntrada/MapeoPE" xmlns:sxxf="http://www.sun.com/wsbpel/2.0/process/executable/SUNExtension/XPathFunctions" xmlns:ns0="http://j2ee.netbeans.org/xsd/tableSchema" xmlns:ns1="http://java.sun.com/xml/ns/jaxb" xmlns:ns2="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_cab">
<import namespace="http://j2ee.netbeans.org/wsdl/MapeoPedidosEntrada/PollInPE" location="PollInPE.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
<import namespace="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_cab" location="recumat_htor2-siglo_ped_ext_cab.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
<import namespace="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_lin" location="recumat_htor2-siglo_ped_ext_lin.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
<import namespace="http://j2ee.netbeans.org/wsdl/bitacora/bitacora" location="localhost_9080/bitacoraService/bitacoraPort.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
<partnerLinks>
<partnerLink name="siglo_ped_ext_cab" xmlns:tns="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_cab" partnerLinkType="tns:jdbcpartner" partnerRole="jdbcPortTypeRole"/>
<partnerLink name="siglo_ped_ext_lin" xmlns:tns="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_lin" partnerLinkType="tns:jdbcpartner" partnerRole="jdbcPortTypeRole"/>
<partnerLink name="log" xmlns:tns="http://j2ee.netbeans.org/wsdl/bitacora/bitacora" partnerLinkType="tns:bitacora" partnerRole="bitacoraPortTypeRole"/>
<partnerLink name="Entrada" xmlns:tns="http://j2ee.netbeans.org/wsdl/MapeoPedidosEntrada/PollInPE" partnerLinkType="tns:PollInPE" myRole="FileInboundPortTypeRole"/>
</partnerLinks>
<variables>
<variable name="BitacoraOperationIn" xmlns:tns="http://j2ee.netbeans.org/wsdl/bitacora/bitacora" messageType="tns:bitacoraOperationRequest"/>
<variable name="InsertOutSIGLO_PED_EXT_LIN" xmlns:tns="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_lin" messageType="tns:insertRetMsg"/>
<variable name="InsertInSIGLO_PED_EXT_LIN" xmlns:tns="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_lin" messageType="tns:inputMsg"/>
<variable name="InsertOutSIGLO_PED_EXT_CAB" xmlns:tns="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_cab" messageType="tns:insertRetMsg"/>
<variable name="InsertInSIGLO_PED_EXT_CAB" xmlns:tns="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_cab" messageType="tns:inputMsg"/>
<variable name="PollIn" xmlns:tns="http://j2ee.netbeans.org/wsdl/MapeoPedidosEntrada/PollInPE" messageType="tns:PollInputMessage"/>
</variables>
<sequence>
<receive name="Receive1" createInstance="yes" partnerLink="Entrada" operation="poll" xmlns:tns="http://j2ee.netbeans.org/wsdl/MapeoPedidosEntrada/PollInPE" portType="tns:FileInboundPortType" variable="PollIn"/>
<assign name="Assign2log">
<copy>
<from>string($PollIn.part1)</from>
<to variable="BitacoraOperationIn" part="part1"/>
</copy>
</assign>
<invoke name="log" partnerLink="log" operation="bitacoraOperation" xmlns:tns="http://j2ee.netbeans.org/wsdl/bitacora/bitacora" portType="tns:bitacoraPortType" inputVariable="BitacoraOperationIn"/>
<assign name="Assign1">
<copy>
<from>$PollIn.part1/ns1:ORDERS/@numero</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_numero_pedido</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/@FechaPedido</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_fecha_pedido</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/@FechaEntrega</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_fecha_entrega</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/@Observaciones</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_observaciones</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/@ejercicio</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_ejercicio</to>
</copy>
<copy>
<from>number($PollIn.part1/ns1:ORDERS/@Funcion)</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_funcion</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/@tipoPedido</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_tipo_pedido</to>
</copy>
<copy>
<from>string($PollIn.part1/ns1:ORDERS/@condFacturar)</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_condfacturar</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Usuario/@id</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_usuario_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Usuario/ns1:Contacto/@tipo</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_contacto_tipo</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Usuario/ns1:Contacto/@id</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_contacto_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Usuario/ns1:Contacto/@descripcion</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_contacto_desc</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Usuario/ns1:Contacto/@valor</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_contacto_valor</to>
</copy>
<copy>
<from>number($PollIn.part1/ns1:ORDERS/ns1:Procedimiento/@codigo)</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_proced_cod</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Procedimiento/@descripcion</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_proced_desc</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/@id</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_ped_ext_cab_pk</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Procedimiento/@id</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_proced_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Contrato/@id</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_contrato_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Contrato/@Expediente</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_contr_expedte</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Contrato/@CCA</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_contr_cca</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Empresa/@codigo</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_emp_cod</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Empresa/@id</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_empresa_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Empresa/@CIF</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_emp_cif</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Empresa/@nombreComercial</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_emp_nom_comerc</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Empresa/@EANDestino</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_emp_ean_dest</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Empresa/@nombreFiscal</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_emp_nom_fiscal</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Empresa/@EANvendedor</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_emp_ean_vend</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:OrganoGestor/@descripcion</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_orgestor_desc</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:OrganoGestor/@id</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_orgestor_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:OrganoGestor/@EANEmisor</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_orges_eanemis</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:OrganoGestor/@EANQpide</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_orges_eanqpide</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:OrganoGestor/@EANAqsf</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_orges_eanaqsf</to>
</copy>
<copy>
<from>number($PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@numeroSerie)</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_num_serie</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@numeroLinea</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_numero_linea</to>
</copy>
<copy>
<from>number($PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@numeroLote)</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_num_lote</to>
</copy>
<copy>
<from>number($PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@numeroAlbaran)</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_num_albaran</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@fechaAlbaran</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_fecha_albaran</to>
</copy>
<copy>
<from>number($PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@valorarAlbaranes)</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_valorar_albar</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@CantidadCompra</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_cant_compra</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@Observaciones</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_observaciones</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@cantidadPendiente</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_cant_pendiente</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@cantidadAnulada</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_cant_anulada</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@precio</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_precio</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Producto/@CIP</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_produ_cip</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Producto/@marca</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:spl_produ_marca</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Producto/@refFabricante</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_produ_refabric</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Producto/@modelo</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_produ_modelo</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Producto/@id</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_producto_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Articulo/@codigo</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_art_codigo</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Articulo/@codigoLocal</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_art_codigo_loc</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Articulo/@codigoSAS</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_art_codigo_sas</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Articulo/@unidadMedida</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_art_und_medida</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Articulo/@unidadContratacion</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_art_und_contra</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Articulo/@id</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_artgenerico_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:InfLogistica/@id</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_presentac_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:InfLogistica/@codigoEAN</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_pre_cod_ean</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:InfLogistica/@refDistribuidor</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_ref_distribuid</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:InfLogistica/ns1:Oferta/@id</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_oferta_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:InfLogistica/ns1:Oferta/@factorContratacion</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_factor_contrat</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:InfLogistica/ns1:Oferta/@cantidadEnUnidades</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_cant_en_unds</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:InfLogistica/ns1:Oferta/@cantidadContratacion</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_cant_contrata</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:ProgramacionEntregas/ns1:Entregar/@id</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_linprogent_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:ProgramacionEntregas/ns1:Entregar/@cantidad</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_cant_entrega</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:ProgramacionEntregas/ns1:Entregar/@fecha</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_fecha_entrega</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:PuntoEntrega/@id</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_pto_entrega_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:PuntoEntrega/@EANReceptor</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_ean_receptor</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:PuntoEntrega/@descripcion</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_pto_entre_desc</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Origen/@id</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_origen_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Origen/ns1:SolicitudLinea/@id</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_lin_solic_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Origen/ns1:TipoOrigen/@descripcion</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_tp_origen_desc</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Origen/ns1:TipoOrigen/@id</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_tp_origen_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Origen/ns1:SolicitudLinea/ns1:Solicitud/@id</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_solicitud_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Origen/ns1:SolicitudLinea/ns1:Solicitud/@codigo</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_solicitud_cod</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@id</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_ped_ext_lin_pk</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/@id</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pec_ped_ext_cab_pk</to>
</copy>
</assign>
<invoke name="Invoke_SIGLO_PED_EXT_CAB" partnerLink="siglo_ped_ext_cab" operation="insert" portType="ns2:jdbcPortType" inputVariable="InsertInSIGLO_PED_EXT_CAB" outputVariable="InsertOutSIGLO_PED_EXT_CAB"/>
<invoke name="Invoke_SIGLO_PED_EXT_LIN" partnerLink="siglo_ped_ext_lin" operation="insert" xmlns:tns="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_lin" portType="tns:jdbcPortType" inputVariable="InsertInSIGLO_PED_EXT_LIN" outputVariable="InsertOutSIGLO_PED_EXT_LIN"/>
</sequence>
</process> Thanks in advance!!!
&nI change the bpel to this:
<?xml version="1.0" encoding="UTF-8"?>
<process
name="MapeoPE"
targetNamespace="http://enterprise.netbeans.org/bpel/MapeoPedidosEntrada/MapeoPE"
xmlns="http://docs.oasis-open.org/wsbpel/2.0/process/executable"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:sxt="http://www.sun.com/wsbpel/2.0/process/executable/SUNExtension/Trace"
xmlns:sxed="http://www.sun.com/wsbpel/2.0/process/executable/SUNExtension/Editor"
xmlns:tns="http://enterprise.netbeans.org/bpel/MapeoPedidosEntrada/MapeoPE" xmlns:sxxf="http://www.sun.com/wsbpel/2.0/process/executable/SUNExtension/XPathFunctions" xmlns:ns0="http://j2ee.netbeans.org/xsd/tableSchema" xmlns:ns1="http://java.sun.com/xml/ns/jaxb" xmlns:ns2="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_cab">
<import namespace="http://j2ee.netbeans.org/wsdl/MapeoPedidosEntrada/PollInPE" location="PollInPE.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
<import namespace="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_cab" location="recumat_htor2-siglo_ped_ext_cab.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
<import namespace="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_lin" location="recumat_htor2-siglo_ped_ext_lin.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
<import namespace="http://j2ee.netbeans.org/wsdl/bitacora/bitacora" location="localhost_9080/bitacoraService/bitacoraPort.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
<partnerLinks>
<partnerLink name="siglo_ped_ext_cab" xmlns:tns="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_cab" partnerLinkType="tns:jdbcpartner" partnerRole="jdbcPortTypeRole"/>
<partnerLink name="siglo_ped_ext_lin" xmlns:tns="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_lin" partnerLinkType="tns:jdbcpartner" partnerRole="jdbcPortTypeRole"/>
<partnerLink name="log" xmlns:tns="http://j2ee.netbeans.org/wsdl/bitacora/bitacora" partnerLinkType="tns:bitacora" partnerRole="bitacoraPortTypeRole"/>
<partnerLink name="Entrada" xmlns:tns="http://j2ee.netbeans.org/wsdl/MapeoPedidosEntrada/PollInPE" partnerLinkType="tns:PollInPE" myRole="FileInboundPortTypeRole"/>
</partnerLinks>
<variables>
<variable name="BitacoraOperationIn" xmlns:tns="http://j2ee.netbeans.org/wsdl/bitacora/bitacora" messageType="tns:bitacoraOperationRequest"/>
<variable name="InsertOutSIGLO_PED_EXT_LIN" xmlns:tns="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_lin" messageType="tns:insertRetMsg"/>
<variable name="InsertInSIGLO_PED_EXT_LIN" xmlns:tns="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_lin" messageType="tns:inputMsg"/>
<variable name="InsertOutSIGLO_PED_EXT_CAB" xmlns:tns="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_cab" messageType="tns:insertRetMsg"/>
<variable name="InsertInSIGLO_PED_EXT_CAB" xmlns:tns="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_cab" messageType="tns:inputMsg"/>
<variable name="PollIn" xmlns:tns="http://j2ee.netbeans.org/wsdl/MapeoPedidosEntrada/PollInPE" messageType="tns:PollInputMessage"/>
</variables>
<faultHandlers>
<catchAll>
<sequence name="Sequence1" xmlns:tns="http://j2ee.netbeans.org/wsdl/bitacora/bitacora">
<assign name="Assign2log">
<copy>
<from>string($PollIn.part1)</from>
<to variable="BitacoraOperationIn" part="part1"/>
</copy>
</assign>
<invoke name="log" partnerLink="log" operation="bitacoraOperation" xmlns:tns="http://j2ee.netbeans.org/wsdl/bitacora/bitacora" portType="tns:bitacoraPortType" inputVariable="BitacoraOperationIn"/>
</sequence>
</catchAll>
</faultHandlers>
<sequence>
<receive name="Receive1" createInstance="yes" partnerLink="Entrada" operation="poll" xmlns:tns="http://j2ee.netbeans.org/wsdl/MapeoPedidosEntrada/PollInPE" portType="tns:FileInboundPortType" variable="PollIn"/>
<sequence name="Sequence1bis" xmlns:tns="http://j2ee.netbeans.org/wsdl/bitacora/bitacora">
<assign name="bisAssign2log">
<copy>
<from>string($PollIn.part1)</from>
<to variable="BitacoraOperationIn" part="part1"/>
</copy>
</assign>
<invoke name="bislog" partnerLink="log" operation="bitacoraOperation" xmlns:tns="http://j2ee.netbeans.org/wsdl/bitacora/bitacora" portType="tns:bitacoraPortType" inputVariable="BitacoraOperationIn"/>
</sequence>
<empty name="HastaAquiVa"/>
<assign name="Assign1">
<copy>
<from>$PollIn.part1/ns1:ORDERS/@numero</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_numero_pedido</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/@FechaPedido</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_fecha_pedido</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/@FechaEntrega</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_fecha_entrega</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/@Observaciones</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_observaciones</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/@ejercicio</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_ejercicio</to>
</copy>
<copy>
<from>number($PollIn.part1/ns1:ORDERS/@Funcion)</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_funcion</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/@tipoPedido</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_tipo_pedido</to>
</copy>
<copy>
<from>string($PollIn.part1/ns1:ORDERS/@condFacturar)</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_condfacturar</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Usuario/@id</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_usuario_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Usuario/ns1:Contacto/@tipo</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_contacto_tipo</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Usuario/ns1:Contacto/@id</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_contacto_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Usuario/ns1:Contacto/@descripcion</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_contacto_desc</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Usuario/ns1:Contacto/@valor</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_contacto_valor</to>
</copy>
<copy>
<from>number($PollIn.part1/ns1:ORDERS/ns1:Procedimiento/@codigo)</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_proced_cod</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Procedimiento/@descripcion</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_proced_desc</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/@id</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_ped_ext_cab_pk</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Procedimiento/@id</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_proced_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Contrato/@id</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_contrato_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Contrato/@Expediente</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_contr_expedte</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Contrato/@CCA</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_contr_cca</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Empresa/@codigo</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_emp_cod</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Empresa/@id</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_empresa_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Empresa/@CIF</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_emp_cif</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Empresa/@nombreComercial</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_emp_nom_comerc</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Empresa/@EANDestino</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_emp_ean_dest</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Empresa/@nombreFiscal</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_emp_nom_fiscal</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Empresa/@EANvendedor</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_emp_ean_vend</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:OrganoGestor/@descripcion</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_orgestor_desc</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:OrganoGestor/@id</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_orgestor_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:OrganoGestor/@EANEmisor</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_orges_eanemis</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:OrganoGestor/@EANQpide</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_orges_eanqpide</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:OrganoGestor/@EANAqsf</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_orges_eanaqsf</to>
</copy>
<copy>
<from>number($PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@numeroSerie)</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_num_serie</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@numeroLinea</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_numero_linea</to>
</copy>
<copy>
<from>number($PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@numeroLote)</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_num_lote</to>
</copy>
<copy>
<from>number($PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@numeroAlbaran)</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_num_albaran</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@fechaAlbaran</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_fecha_albaran</to>
</copy>
<copy>
<from>number($PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@valorarAlbaranes)</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_valorar_albar</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@CantidadCompra</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_cant_compra</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@Observaciones</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_observaciones</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@cantidadPendiente</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_cant_pendiente</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@cantidadAnulada</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_cant_anulada</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@precio</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_precio</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Producto/@CIP</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_produ_cip</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Producto/@marca</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:spl_produ_marca</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Producto/@refFabricante</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_produ_refabric</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Producto/@modelo</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_produ_modelo</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Producto/@id</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_producto_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Articulo/@codigo</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_art_codigo</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Articulo/@codigoLocal</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_art_codigo_loc</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Articulo/@codigoSAS</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_art_codigo_sas</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Articulo/@unidadMedida</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_art_und_medida</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Articulo/@unidadContratacion</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_art_und_contra</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Articulo/@id</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_artgenerico_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:InfLogistica/@id</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_presentac_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:InfLogistica/@codigoEAN</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_pre_cod_ean</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:InfLogistica/@refDistribuidor</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_ref_distribuid</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:InfLogistica/ns1:Oferta/@id</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_oferta_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:InfLogistica/ns1:Oferta/@factorContratacion</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_factor_contrat</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:InfLogistica/ns1:Oferta/@cantidadEnUnidades</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_cant_en_unds</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:InfLogistica/ns1:Oferta/@cantidadContratacion</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_cant_contrata</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:ProgramacionEntregas/ns1:Entregar/@id</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_linprogent_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:ProgramacionEntregas/ns1:Entregar/@cantidad</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_cant_entrega</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:ProgramacionEntregas/ns1:Entregar/@fecha</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_fecha_entrega</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:PuntoEntrega/@id</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_pto_entrega_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:PuntoEntrega/@EANReceptor</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_ean_receptor</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:PuntoEntrega/@descripcion</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_pto_entre_desc</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Origen/@id</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_origen_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Origen/ns1:SolicitudLinea/@id</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_lin_solic_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Origen/ns1:TipoOrigen/@descripcion</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_tp_origen_desc</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Origen/ns1:TipoOrigen/@id</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_tp_origen_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Origen/ns1:SolicitudLinea/ns1:Solicitud/@id</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_solicitud_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Origen/ns1:SolicitudLinea/ns1:Solicitud/@codigo</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_solicitud_cod</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@id</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_ped_ext_lin_pk</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/@id</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pec_ped_ext_cab_pk</to>
</copy>
</assign>
<invoke name="Invoke_SIGLO_PED_EXT_CAB" partnerLink="siglo_ped_ext_cab" operation="insert" portType="ns2:jdbcPortType" inputVariable="InsertInSIGLO_PED_EXT_CAB" outputVariable="InsertOutSIGLO_PED_EXT_CAB"/>
<invoke name="Invoke_SIGLO_PED_EXT_LIN" partnerLink="siglo_ped_ext_lin" operation="insert" xmlns:tns="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_lin" portType="tns:jdbcPortType" inputVariable="InsertInSIGLO_PED_EXT_LIN" outputVariable="InsertOutSIGLO_PED_EXT_LIN"/>
</sequence>
</process>
And change the XML input to that:
<?xml version="1.0" encoding="iso-8859-1"?>
<root>
<ORDERS id="125" numero="34" FechaPedido="05/10/2006" FechaEntrega="05/11/2006" Observaciones="Pedido en monitorización." ejercicio="2006" Funcion="0" tipoPedido="220" condFacturar="81E">
<Usuario id="45">
<Contacto id="13" tipo="TE" descripcion="Teléfono de Juanjo Carmona" valor="620987845"/>
</Usuario>
<Procedimiento id="1" codigo="0" descripcion="Concurso Público"/>
<Contrato id="1457467" Expediente="07CSU001" CCA="123+WER345"/>
<Empresa id="13" codigo="237619" nombreComercial="nombreComercial1" nombreFiscal="nombreFiscal1" CIF="cif1" EANvendedor="CODIGOEAN111" EANDestino="CODIGOEAN112"/>
<OrganoGestor id="1" descripcion="Hospital Virgen de Tal" EANQpide="CODIGOEAN113" EANAqsf="CODIGOEAN114" EANEmisor="CODIGOEAN115"/>
<Lineas>
<PedidoLinea id="234" numeroLinea="1" numeroSerie="1" numeroLote="1" numeroAlbaran="1" fechaAlbaran="05/11/2006" valorarAlbaranes="true" CantidadCompra="3" Observaciones="observaciones lÃÂnea1" cantidadPendiente="3" cantidadAnulada="0" precio="11.243">
<Producto id="1228" CIP="" refFabricante="CS-16402" modelo="modelo1" marca="marca1"/>
<Articulo id="89" codigo="001097" codigoSAS="01.02.07.120045" codigoLocal="014554" unidadContratacion="CMK" unidadMedida="CMK"/>
<InfLogistica id="45" codigoEAN="codigoEAN1" refDistribuidor="refDistribuidor1">
<Oferta id="67" factorContratacion="2.5" cantidadContratacion="7.5" cantidadEnUnidades="7"/>
</InfLogistica>
<ProgramacionEntregas>
<Entregar id="61" cantidad="3" fecha="05/11/2006"/>
</ProgramacionEntregas>
<PuntoEntrega id="546" EANReceptor="CODIGOEAN120" descripcion="Almacen principal"/>
<Origen id="464">
<TipoOrigen id="1" descripcion="tipo1"/>
<SolicitudLinea id = "453">
<Solicitud id="67" codigo="3456"/>
</SolicitudLinea>
</Origen>
</PedidoLinea>
</Lineas>
</ORDERS>
</root>
An the result is:
I18N: BPJBI-3002: Pattern for exchange Id 123033969803782-31456-134439750656880061 is http://www.w3.org/2004/08/wsdl/in-only
I18N: BPJBI-3004: Received in-only message for M Ex 123033969803782-31456-134439750656880061 content is <?xml version="1.0" encoding="UTF-8"?><jbi:message xmlns:msgns="http://j2ee.netbeans.org/wsdl/MapeoPedidosEntrada/PollInPE" type="msgns:PollInputMessage" version="1.0" xmlns:jbi="http://java.sun.com/xml/ns/jbi/wsdl-11-wrapper"><jbi:part><root>
<ORDERS FechaEntrega="05/11/2006" FechaPedido="05/10/2006" Funcion="0" Observaciones="Pedido en monitorizaci�³n." condFacturar="81E" ejercicio="2006" id="125" numero="34" tipoPedido="220">
<Usuario id="45">
<Contacto descripcion="Tel�©fono de Juanjo Carmona" id="13" tipo="TE" valor="620987845"/>
</Usuario>
<Procedimiento codigo="0" descripcion="Concurso P�ºblico" id="1"/>
<Contrato CCA="123+WER345" Expediente="07CSU001" id="1457467"/>
<Empresa CIF="cif1" EANDestino="CODIGOEAN112" EANvendedor="CODIGOEAN111" codigo="237619" id="13" nombreComercial="nombreComercial1" nombreFiscal="nombreFiscal1"/>
<OrganoGestor EANAqsf="CODIGOEAN114" EANEmisor="CODIGOEAN115" EANQpide="CODIGOEAN113" descripcion="Hospital Virgen de Tal" id="1"/>
<Lineas>
<PedidoLinea CantidadCompra="3" Observaciones="observaciones lÃ?Ânea1" cantidadAnulada="0" cantidadPendiente="3" fechaAlbaran="05/11/2006" id="234" numeroAlbaran="1" numeroLinea="1" numeroLote="1" numeroSerie="1" precio="11.243" valorarAlbaranes="true">
<Producto CIP="" id="1228" marca="marca1" modelo="modelo1" refFabricante="CS-16402"/>
<Articulo codigo="001097" codigoLocal="014554" codigoSAS="01.02.07.120045" id="89" unidadContratacion="CMK" unidadMedida="CMK"/>
<InfLogistica codigoEAN="codigoEAN1" id="45" refDistribuidor="refDistribuidor1">
<Oferta cantidadContratacion="7.5" cantidadEnUnidades="7" factorContratacion="2.5" id="67"/>
</InfLogistica>
<ProgramacionEntregas>
<Entregar cantidad="3" fecha="05/11/2006" id="61"/>
</ProgramacionEntregas>
<PuntoEntrega EANReceptor="CODIGOEAN120" descripcion="Almacen principal" id="546"/>
<Origen id="464">
<TipoOrigen descripcion="tipo1" id="1"/>
<SolicitudLinea id="453">
<Solicitud codigo="3456" id="67"/>
</SolicitudLinea>
</Origen>
</PedidoLinea>
</Lineas>
</ORDERS>
</root></jbi:part></jbi:message>
I18N: BPJBI-3015: Sending status for 123033969803782-31456-134439750656880061. Status: Done.
I18N: BPJBI-3019: Sending a one way outbound message to the NMR. MessageExchangeId is 123033969803782-31456-134439750657350062, service name is {http://enterprise.netbeans.org/bpel/MapeoPedidosEntrada/MapeoPE}log, endpoint name is bitacoraPortTypeRole_partnerRole.
I18N: BPJBI-3018: The contents of the message are : <?xml version="1.0" encoding="UTF-8"?><jbi:message xmlns:msgns="http://j2ee.netbeans.org/wsdl/bitacora/bitacora" type="msgns:bitacoraOperationRequest" version="1.0" xmlns:jbi="http://java.sun.com/xml/ns/jbi/wsdl-11-wrapper"><jbi:part>
</jbi:part></jbi:message>
HTTPBC-E01052: The value set on the org.glassfish.openesb.address.url normalized message property is invalid. This property is expected to be of String type only.
I18N: BPJBI-3002: Pattern for exchange Id 123033969803782-31456-134439750657350063 is http://www.w3.org/2004/08/wsdl/in-only
I18N: BPJBI-3004: Received in-only message for M Ex 123033969803782-31456-134439750657350063 content is <?xml version="1.0" encoding="UTF-8"?><jbi:message xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:msgns="http://j2ee.netbeans.org/wsdl/bitacora/bitacora" name="input1" type="msgns:bitacoraOperationRequest" version="1.0" xmlns:jbi="http://java.sun.com/xml/ns/jbi/wsdl-11-wrapper"><jbi:part xmlns:m="http://j2ee.netbeans.org/wsdl/bitacora/bitacora">
</jbi:part></jbi:message>
I18N: BPJBI-3015: Sending status for 123033969803782-31456-134439750657350063. Status: Done.
I18N: BPJBI-3002: Pattern for exchange Id 123033969803782-31456-134439750657350062 is http://www.w3.org/2004/08/wsdl/in-only
I18N: BPCOR-3003:
document before transformation:
<?xml version="1.0" encoding="UTF-8" standalone="no"?><jbi:message xm -
hi
my name is kapil and i am trying to open one (which is downloded) pdf document.which giving me an error as there was an error processing a page. there was a problem reading this document (110) for some page only. i am using acrobat reader x. is it any 3d setting or any thing else please give me an idea. i am waiting for replay as soon as possible...........
your sincerely
KAPIL TRIVEDIWhen I encountered an error "there was a problem reading this document 110" in Acrobat Pro 11 on 28.7 MB CS6 file, it indeed was very frustrating.
I solved my problem, but since I don't know which step benefitted me, I've to enumerate all the steps I took:
Read below:
1.1. I could copy the file anywhere on the drive, but couldn't 'save as' from Acrobat Pro.
1.2. No document security was applied of any sort on the file.
1.3. Still in the first tab of the document properties, all details under advance section were empty. No 'PDF Version' 'location' 'file size' etc were populated. Nothing.
1.4. I couldn't change and save anything in any of property dialogue. I could comment on the text, but as soon as I tried to save, it gave an error (some sort of 'File reading' error).
1.5. When I tried to extract a page (I tried many), it gave 'reading error'.
1.6. I didn't try 'splitting error'. Since I was 100% sure, it'll give me same reading error.
1.7. I opened the file in Firefox and tried saving it as pdf from there. But no error, but no save either.
1.8. I ran 'Remove Hidden Information' from protection panel without any errors.
1.9. I tried 'sanitize document' from the same tab, but didn't succeed.
1.10. Then (here I think the problem was resolved), from Document Processing panel, I did some commands. 1st, 'Export all images', successfully. Then 'Remove all links', it found 0.
1.11. Then in 'print production' panel, I clicked/tried to open acrobat distiller. The same opened, did some processing. But I don't know if it did something in solving the problem or not.
1.12. Although I think my problem was resolved till now, but the last step I did was 'Saved As' the file (from the file menu) as a .ps file. Though I've not yet reopened/used that ps file (to convert it into a pdf file again). But around here I wanted to close the file and it asked me whether I wanted to save the file, I said yes. And it saved the file correctly. And I checked that in properties dialogue, the missing information was populated too.
1.13. Sorry for so lengthy instructions, but I had no choice. -
There was a problem reading this document (117)
Dear Designers
I am facing a strange problem while doing test presentment in Adobe output designer. When i do a test presentment with my dat file which is meant for fax (^job newFax -fform01F.MDF) , i see the pdf (consist of 2 pages ) but as soon as i scroll down to next page (Pg 2) of my pdf ; it giving me a Adobe reader error pop up "There was a problem reading this document (117)" and when i click OK and comes to page 2 (i'm seeing the content of Pg2 curerntly) and scroll back to page 1 the data on page 2 goes blank. What could be the possible reason for this ? I assume the flaw is on Adobe reader side , but please brighten me with the knowledge if there is some issue on dat file side.
Any possible guidance or help would be highly appreciated
thanks
jaYSorry, I do not quite understand what your problem is:
you have a problem with signing in to the ExportPDF service ?
you have a problem opening PDF files ? If so, are these local or online documents?
P.S. Reader XI and earlier will no longer support Document Cloud PDF services as of May 20; see https://forums.adobe.com/docs/DOC-5891 -
As a result of this error, I cannot delete pages in a big PDF file I have of 1032 pages.
The error, famous on the web and in Google, is:
there was a problem reading this document (15)
I hope I can find a solution for this, because I cannot delete the unnecessary pages inside the document which is driving me crazy.
Adobe Acrobat X has a very poor quality testing. In fact I don't beleive Adobe test their products, I think they just program them, label them as the finished product, ASK FOR A HIGH PRICE, OF COURSE, and release them to the market creating a lot of nightmares and headaches to the customer.
Adobe Acrobat X crashed several times when the files have flash content inside or formularies. The program, simply, is bad programmed with a very poor engineering inside.
As soon I find an alternative for PDF, I will switch, I promise, in fact I don't promise it, I SWEAR IT.
And if I dont find a solution for this I will put in my car a banner that says "DON'T BUY ADOBE ACROBAT, IS THE WORST PROGRAM YOU CAN FIND!"
I'm loosing days and days of work, this is costing me problems and money.Yes, there is something wrong with the document. That is the defective programming the Adobe engineering team did. And please, allow me to explain you why it is defective. After you spend millions dollars in 950 engineers and 3100 beta testers, you can destroy Adobe Acrobat X easily just downloading a website rich in flash content. Some animated banners in the downloaded pages from the web, it's enough to destroy it.
Just go to a website where you have animated banners, and press Shift+Crtl+O to download the pages...
Save your PDF document and then try to work with it.
If the document has a big size, let's say 1000 pages approximately, and many of them have flash content... Adobe Acrobat X crash automatically just moving from one page to another.
As simple as that.
Is the most unstable program I've seen in all my life. And please, don't tell me it's my machine, because I've tested it in other computers. The same!
But there is more! yes
Forms fields also destroy Acrobat X
In a big PDF file having several pages inside with forms, just go to Tools, Forms and Edit, then in the list of pages try to delete the forms fields selecting them and pressing the Del key... crasshhhh Acrobat X die.
What kind of betatesters you chose to test your products? For sure are people that are working with light documents of 5... 10 pages and no more.
For sure are not people working extensively with Adobe Acrobat, as I do.
And what happens when Acrobat X crash miserably time after time? that the Error 15 comes, because the file becomes corrupted.
This is not serious.
Is this the kind of performance and stability that Acrobat provide to the customers? having the risk to lose important documents and data, due how unstable is the program?
You can tell me you hired NASA personnel to do this program, but customers need results, and crashing the program just pressing one key is not serious.
And talking about complains I don't want to remember the last update of the Acrobat 9 !!!
And you know what? a simple tool as NitroPDF don't crash!
Sadly NitroPDF is not an option for me, because I embed videos in the PDF documents and NitroPDF don't allow me that.
I am using Adobe Acrobat X because sadly I don't find another alternative, the day I find it, I'll switch for sure.
Or perhaps we can get a miracle, and your programmers could focus in what is IMPORTANT: STABILITY AND PERFORMANCE. -
I opened a pdf document in Adobe Reader X. When I attempted to scroll through the pages the following error message appeared, “There was an error processing a page. There was a problem reading the document (110). After an Internet search to try to find the reason for the error and a solution, I came across a site that suggested it was an issue regarding the fonts of the document. I then reopened the document and went into the document’s font properties (FILE – PROPERTIES – FONTS tab). There I noticed that the “Gathering font information” stopped at 2% which, of course, I took to mean that Adobe Reader X was having a difficult time in loading the font’s information. Another site suggested opening the document in the pdf reader, Foxit. So I did, and the document loaded properly with no error messages. I was still curious as to why the document did not load entirely in Adobe Reader X and if the same problem would occur using a different reader. I then downloaded the pdf reader, Nitro Reader 2. I opened the same document and initially received the following message, “The requested page number is invalid and does not exist in this document.” I closed the message and proceeded to scroll through the document. As I scrolled, the following message appeared, “This file was damaged (corrupted) and has been repaired.” I thought, “Wonderful!” I then chose <FILE – SAVE AS – PDF DOCUMENT> and saved the “repaired” document under a new name. When I opened the “repaired” document with Adobe Reader X, behold, the document opened entirely with no error message. I was curious, so I went into the document’s font properties and noticed, this time around, that the “Gathering font information” loaded to 100%. Nitro Reader 2 detected the error and fixed it. Now I’m left to wonder…why wasn’t Adobe Reader X able to do the same? I hope this post helps others who are experiencing the same issue.
When I encountered an error "there was a problem reading this document 110" in Acrobat Pro 11 on 28.7 MB CS6 file, it indeed was very frustrating.
I solved my problem, but since I don't know which step benefitted me, I've to enumerate all the steps I took:
Read below:
1.1. I could copy the file anywhere on the drive, but couldn't 'save as' from Acrobat Pro.
1.2. No document security was applied of any sort on the file.
1.3. Still in the first tab of the document properties, all details under advance section were empty. No 'PDF Version' 'location' 'file size' etc were populated. Nothing.
1.4. I couldn't change and save anything in any of property dialogue. I could comment on the text, but as soon as I tried to save, it gave an error (some sort of 'File reading' error).
1.5. When I tried to extract a page (I tried many), it gave 'reading error'.
1.6. I didn't try 'splitting error'. Since I was 100% sure, it'll give me same reading error.
1.7. I opened the file in Firefox and tried saving it as pdf from there. But no error, but no save either.
1.8. I ran 'Remove Hidden Information' from protection panel without any errors.
1.9. I tried 'sanitize document' from the same tab, but didn't succeed.
1.10. Then (here I think the problem was resolved), from Document Processing panel, I did some commands. 1st, 'Export all images', successfully. Then 'Remove all links', it found 0.
1.11. Then in 'print production' panel, I clicked/tried to open acrobat distiller. The same opened, did some processing. But I don't know if it did something in solving the problem or not.
1.12. Although I think my problem was resolved till now, but the last step I did was 'Saved As' the file (from the file menu) as a .ps file. Though I've not yet reopened/used that ps file (to convert it into a pdf file again). But around here I wanted to close the file and it asked me whether I wanted to save the file, I said yes. And it saved the file correctly. And I checked that in properties dialogue, the missing information was populated too.
1.13. Sorry for so lengthy instructions, but I had no choice. -
when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ?
if you can help me thank's
[email address removed by host]thank's for reply and your help
i did the step's that you told me but i still have the same problem
i have the latest v.11.0.7
i
i disable the protected mode -
System: Windows 7 64-bit
Adobe Acrobat Pro X
Client received a pdf file and gets this message when try to open it.
I test it on my PC which is using Acrobat standard (same system) and gets the same error. Did some research on Internet and this message with the code 129 is rare.
Please help and thanks in advance.
FengThanks Guys.
The file she was trying to open was created by herself days ago, I asked client to open previous file version and she can open it.
So that means the conclusion you guys made is correct.
But she is getting another error message when sha trys to save a different file:
"The dicunent could not be saved. There was a problem reading this document (14) "
Any ideas?
Thanks
Maybe you are looking for
-
I have a ipod classic 4th gen with 20gb and it has stopped working. I reset it when I first got it and put my songs on it and it worked fine. I let is set for a few months while I tried to find a new ipod cable for my car. When I tried to use it, wit
-
Deleting photo's when trying to add more
How can I add more photo's to ipod from computer without wiping existing photo's stored on ipod.
-
OBIEE Customization - Removing Help (?) icon Across OBIEE11g Application
Hi, I am using OBIEE 11g and I need to remove 'Help' (?) icon across OBIEE Application. Can you pls. guide me to achieve it. Thanks for your help. Regards, Ramesh
-
We are using Oracle EBS 11.5.10.2 We were wanting to upgrade Now the next version I believe is R12 However I hear talks about Fusion. Does anyone have information about Oracle Fusion.. Is Fusion a product which is integrated like Oracle R12 with OTL
-
Why i couldn't open email that sent from Outlook?
Please help me for this matter, i had bought my BB Curve 8520 for just only 5 days and use latest firmware. I have setup 2 emails 1.) hotmail 2.) Outlook (Official mail) i found this issue after i had setup my office email for a few