Problems recieving messages

I had a problem with my N80, so I had it fixed. Since then I am unable to recieve text messages on my O2 number from one specific carrier in a different country. However, with my pay as you go o2 number, I can recieve from that carrier!! Please if anyone has a solution, please let me know. I did contact O2, as they always say you should check with that carrier!!! Thanks

Hello Evilheroneos, let's solve this mystery! Have you been able to receive messages from any other numbers besides the contact? Can you power off phone and reboot. Test sending a message to yourself to see if you receive it. Is the line postpay or prepaid? Keep us posted!
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport

Similar Messages

WhatsAPP problem, recieving messages not instantly....

Hi there, I have a problem receiving some of my whatsapp messages. Sometimes I would get a message instantly other times I would only receive the message once I open my whatsapp app.
I’ve noticed that when I reboot my device, that for the first wile I receive me whatsapp messages instantly.
Why is it so?
Is there a setting that i can change to give whatsapp priority?
Please let me know.
Thank You
Rockster

Rockster wrote:
Hi there, I have a problem receiving some of my whatsapp messages. Sometimes I would get a message instantly other times I would only receive the message once I open my whatsapp app.
I’ve noticed that when I reboot my device, that for the first wile I receive me whatsapp messages instantly.
Why is it so?
Is there a setting that i can change to give whatsapp priority?
Please let me know.
Thank You
Rockster
Rockster wrote:
Hi there, I have a problem receiving some of my whatsapp messages. Sometimes I would get a message instantly other times I would only receive the message once I open my whatsapp app.
I’ve noticed that when I reboot my device, that for the first wile I receive me whatsapp messages instantly.
Why is it so?
Is there a setting that i can change to give whatsapp priority?
Please let me know.
Thank You
Rockster
Hi, I did restart my phone and then for a short while I did get the messages instantly. It’s funny because sometimes it’s instantly and other times only when I open my watsapp there will be a couple of messages. I can see on the time that the messages were send that I did not receive them on time.

Since upgrading to ios7 my message screen is blank.I am neither able to seee,send or recieve messages. I upgraded my iPad at the same time but messaging works fine. Anyone else have this problem? Any suggestions?

Since upgrading to ios7 my message screen is blank.I am neither able to seee,send or recieve messages. I upgraded my iPad at the same time but messaging works fine. Anyone else have this problem? Any suggestions?

I have been researching the exchange message loss problem on other forums, but not seen a link to browser as yet. The message loss problem we have here is in a 32bit PB.

Since I have arrived in south Africa I cannot send or recieve messages ,I was in the uk and Europe and had no problem ,I have tried to reset to no avail any ideas

Since I have arrived in south Africa I cannot send or recieve messages ,I was in the uk and Europe and had no problem ,I have tried to reset to no avail any ideas

What model iPod
Identifying iPod models
http://support.apple.com/kb/HT1353What iOS version (Settings>General>About>Version)
What computer OS and version? I suspect a Mac with OSX 10,5,8
Whart version of iTunes?
A Mac with OSX 10,5.8 should synce but not restore with iTunes version 10.6.3
iTunes 10.6.3
To restore you need iTunes 10.7 or later and that requores OSX 10,6,8 or later

More than one problem with messages app

I'm trying to get this Messages app to work properly on my iphone and macbook pro. I have a few problems that are just very annoying and I can't seem to figure out what I am doing wrong. I'm sure it is some stupid setting I am overlooking, but I have exhausted my brain for the day.
1st problem - I can send and recieve messages on my mac and iphone. That works fine, but there are no notifications on my mac when I send a message from my iphone. The message shows up in the app, but it doesn't give me a notification or a badge that there are new messages. I have it turned on in the settings, but it just won't work...
2nd problem - My phone is the only one that is working. My whife has been sending me imessages from the other room for the past hour testing out the app and I get the messages on my phone, but none are showing up on my mac. I thought they were supposed to go to both?
I really hope someone can help me here. I am very frustrated with the whole thing.

HI,
On the iPhone in Settings > Messages > Received At > Caller ID there should be two "IDs"
One is the iPhone's own number and the other should be the Apple ID.
If the Apple ID is ticked then iMessages sent from the Phone should sync to the Messages app.
However incoming iMessages to the iPhone via it's Number will not sync to the Messages app.
This is apparently coming with the iOS 6 release.
For the Messages App check System Preferences > Notification and the app name and check if it supposed to be using the Dock badge, make sound or display Notifications (Alerts or Banners)
10:11 PM Friday; August 10, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Wrong Reciever message interface name in SXMB_MONI in PI7.1

Hi All,
Some of the interfaces that are getting executed in PI7.1 have wrong reciever message interface name in SXMB_MONI view.
In SOAP Envelope
1.Reciever message interface name is getting populated in <SAP:Sender> tag and
2. Sender message interface name is getting populated in <SAP:Receiver> tag.
But the end to end message flow is getting executed succesfully.
It is not particular to any one of the interfaces. It is occuring randomly.
Did any one encounter this problem earlier?Please share your inputs to resolve the same.
Thanks,
Younus.

Hi,
The SAP note mentioned - contains details specific to SOAP Adapter.
The problem which we have mentioned is occurring across adapters.
Even in SICF transaction. All the details have been correctly maintained.
Any further steps to resolve the issue will be helpful.
Thanks,
Younus

BM MESSAGES CLOCKING AND NEVER SENDING BUT I CAN RECIEVE MESSAGES

for a while my bbm messages took absoloutely ages to send but they did eventually send. today i woke up to find my bbm (blackberry messenger) was not working my display picture, status, name wouldnt change and my messages wouldnt at all send. I can recieve messages but not reply. A red clock would appear at the side and messaged never sent so i removed my battery and restarted my phone but this didnt work. i also tried to fix the problem by removing my sim and re inserting it but this didnt work either. What can i try now and how do i fix the problem???

Settings > Messages > Receive At > Apple ID.
Select your Apple ID and at the menu window that appears, select Sign Out.
Follow this by signing back in with your Apple ID to see if this makes any difference.

Problems with Messages HELP!!!

I have just bought a macbook pro, and at first had problems using ichat (it kept saying i couldnt send a message as it wasnt a us mobile number) so i downloaded mountain lion to get message but now im having problems with that!!!
Ive made an account using my apple log in which is a hotmail address and that works, however for some reason my mac seems to think i am someone else as it uses a picture of someone else (that i am actually friends with) and their name?!?!?!?!?!
When i go to add a buddy i cannot select it as its greyed out
and when i recieve messages on my phone i dont also get them on my messages on my mac, isnt that meant to happen???
Finally in another comment, is it normal for when im on safari for example if i type in ebay (or any other major website) for it automatically take me to the us site???
Thanks guys, im new to macs (obviously)
Hannah

hm ok.
any idea about the other persons name/picture?
and how do i add buddies with it all being greyed out??
and finally can i only send messages to people who have imessage on their phones or is there a way of sending normal messages aswell??
Thanks

Recieving messages from JMS host on different machine

Hi guys and girls,
I am having a little trouble trying to send JMS object messages from one machine to another where the JMS Host is located on the same machine as the server. We'll use the same "earth" "jupiter" example as used by sun in the tutorial.
Basically i want "earth" to generate and send object messages to a JMS host located on the same physical host. Now, i can do this well enough, but problems arise when i want a client program on "jupiter" to access this JMS queue to recieve messages from it.
I followed the example in the J2EE tutorial and it worked fine, although that assumed that the JMS host was located on "jupiter" ands i don't want it there. Is there any way to overcome this???
All imput welcome, and greatly appreciated.
P.S: there's also 2 Duke points it if for one lucky poster :P

Im using Sun AppServer, just following the examples straight through.
Although i think i've found the solution to this one, Message Driven Beans.
Thanks anywayz.

Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.

Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.

Hello Sue,
I have an iPad 3, iPad Mini and iPhone 5S and they are all sluggish on capitalisation using shift keys. I hope that Apple will solve the problem because it is driving me crazy.
I find using a Microsoft Surface and Windows 8 phone, which I also have, work as well as all the ios devices before the ios 7 upgrade.
It has something to do with the length of time that you need to hold the shift key down. The shift key needs to be held longer than the letter key for the capitalisation to work. For some reason, this is a major change in the way we have learnt to touch type on computers. I am having to relearn how to type!
Michael

MacBook 2006 w/Snow Leopard; HP B210 printer; print problem; error message: One or more components of the HP printing software are corrupted or missing. Reinstalled software but Mac will not cause printer to print.

? MacBook 2006 w/Snow Leopard; HP B210 printer; print problem; error message: "One or more components of the HP printing software are corrupted or missing..." Reinstalled software but Mac will not cause printer to print. My MacBook Pro works fine with same wireless printer.

Hi ArielAce , thanks for getting back to me!
I would recommend downloading and running the HP Print and Scan Doctor.
Please keep me posted!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Imessaging on my wifes ipad2 isn't working. It will recieve messages, but when I try to send them to my iphone or my ipad the send button is grayed out and it won't go.

imessaging isn't working on my wifes ipad2. She can recieve messages from my iphone or my ipad1, but she can't send them.

The file format used by the iOS versions of the iWork apps can only be read by the new iWork apps on your Mac - i.e. Keynote 6, Pages 5 & Numbers 3. Those versions for the Mac require Mavericks, OS X 10.9. The "too old" error on a Mac comes if you are trying to open an iWork '08 or earlier file in the newest apps. If you do have the newest apps you can open the files from your iPad.
If you can't or don't want to upgrade to Mavericks & the newest iWork apps your best option would be to export/share the files from the iPad to a type an older version of iWork can read such as Word, text, Excel, etc.
Or contact AppleCare. They made this mess, let them fix it.

Problem in message mapping index.

HI All,
I am doing idoc to file scenario.
I have a problem in message mapping.
Issue is,
pallet1
palletheader(here i used counter to increment the value)
palletline(here i used INDEX to increment the value)
        pallet linenumber1(it should be 1)
        pallet linenumber2(it should be 2)
so on       )
so on
pallet2
palletheader
palletline
        pallet linenumber1(here again it should be 1)
        pallet linenumber2(here again it should be 2)
so on              )
so on
In INDEX we have option called reset index in that we have two radio buttons
one is "reset index to intial value with each new context"
and next one is "donot reset index to intiak value"
if i use the first radio button which is working fine in only one pallet and more pallet lines but not more than one pallet.
If i use the second radio buttton which is working fine in more than one pallet but not satisfying the more pallet lines in one pallet.
Can you please help me on the issue

my requirement is like this.
IF DELVRY05/IDOC/E1EDL20/E1EDL24/POSNR equals to /DELVRY05/IDOC/E1EDL20/E1EDL37/E1EDL44/EXIDV
then map to 'pallet line' .
I tried to keep posnr context as E1EDL20 and also IDOC level.
And at the same way to EXIDV too.
pallet(1 to unbounded)
   pallet header(1 to 1)
   pallet lines(1 to 1)
        in sub level pallet line(1 to unbounded) (here i applied the index logic)
The out put should be pallet line 1,2,3,----- so on
In the second pallet the pallet lines should be again 1,2,3,4-------so on .
But when i try to apply thsi logic,
I am getting only one pallet line instead of two.
second is not comming .
please help on this i am facing this problem for the long time back.
if i solve then i can complete my scenario.

DVD Studio burning problem error message: "remove the VIDEO_TS folder from the Build Location"; where is build location

DVD Studio burning problem error message: "remove the VIDEO_TS folder from the Build Location"; where is build location?

Thanks Shane I followed your instructions and it turned out pretty well. One quick question, Im working with DVD Studio Pro 4, how do i implement a theme into my project? I cant even fin where thay are located. Thanks.

[b]Problem with message choice[/b]

Hi, all, I have a problem with message choice because when I get the value it returns the value of index row.
For example I have this message choice:
<messageChoice model="${bindings.Dept}" readOnly="false" required="no" name="dpt">
<contents childData="${bindings.Dept.displayData}">
<option model="${uix.current}"/>
</contents>
</messageChoice>
If I select the first data of message choice it returns 0, if I select the second data it returns 1 and so on. But I want to return the value of field dept and in message choice I show the dept_name field.
Can anyone tell me how do this? It's urgent because I haven't much time to do this work.
Thanks, Matteo.

Matteo,
Maybe this works for you as well:
<messageChoice model="${bindings.DeptLOV}" name="dpt">
<contents childData="${bindings.DeptList.rangeSet}">
<option value="${uix.current.dept}" text="${uix.current.dept_name}"/>
</contents>
</messageChoice>
where DeptLOV is a LOV List type binding, and DeptList is a Range type binding that is based upon the Dept iterator. If one of these three does not exist in your project yet, you should create them manually via the Structure palette.

Problems recieving messages

Similar Messages

Maybe you are looking for