Problems recognizing space on DVD -how to set 4.7 DVD?

I've finished my iDVD project (4.33GB) and ready to burn it in to a DVD SL 4.7GB, there should be enough space, I have already change the encoding settings to reduce size, but still keeps telling me there is not enough space. In the proyect info panel there is only two options for the DVD type: DVD.SL 4.2 and DVD.DL 7.7, - how to set 4.7 DVD?

Hi
iDVD - does not care about Gbs AT ALL - only duration in time
• Movie duration - PLUS
• Menu duration (and this can take 15 minutes or more from Movie time)
I have movies on 500Mb that are to BIG and at 50Gb that fit's nicely !
iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus  less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
About double on DL DVDs.
Yours Bengt W

Similar Messages

  • How to set the default DVD Burner (output device) in DVDSP 4.2.2

    For the life of me I can't find that click - default DVD Burner (output device) - but I can see where you can set it under both Build/Format and Format. Too bad it always goes back to the superdrive, which I never use. Thx!

    ha! So I am not crazy on this one. The strange thing is that every once in a while when I open DVDSP, the external burner has become the default, and I can use the Burn click, but only until I do a reboot or shutdown. But obviously then there is nothing in the interface for setting a default. jvenzon, If you do a format and build you can choose, which is what I do each time, remembering to change the Destination to the external drive. Then say "reuse" when asked, and I think that does what the Burn click would do anyway. Cheers,
    coocoo

  • In Forms, how to set time to control editng?

    hi guys, Im doing a data entry module.This module used to encode our daily transactions. Sometimes, there are editing/updating of data that happen everyday. My problem is that, i want to control this editng everday to lessen some data problem. My question is how to set time in an oracle forms to control this everyday editing or updating. I want to their editing/updating allow only during the date they encode that particular transactions.
    Can anybody help me solve this problem. Thank you!
    Lala

    Do you want to get the current date?
    You can use SYSDATE for that (getting the database-date) or SYSTEM.CURRENT_DATETIME (getting the OS-date)

  • How to Make a 1 DVD with the content of 2 DVD's?

    I have a project that rquires to re-edit the content of 1 DVD to spanish, and also add the original English DVD material into this new DVD, how do I create 1 DVD from my normal Encore project and and the other files from the English Version Disc, which by the way has links, PDF's, and Ineractual Player Auto Start stuff. I'm using Encore CS3, but I just downloaded CS4 on a PC XP. Thanks for your help.

    Thanks for the reply. I'll respond to your questions...
    I have a DVD (movie not ROM) with a 30 minute safety video in English. The DVD has an incredible amount of links that go from one menu to another to another, it's the most confusing and elaborate menu/chapter I've ever seen, well my customer wants me to translate it into Spanish, but now he told me he wants the English AND Spanish version to be in one disc. That's the problem. I can capture the movie. I can translate the script and do the Spanish voice over (just like in the old karate movies) I can create the new menu pages in Spanish and I can create the intricate links, so what do I do with the English version? I can't create the whole English version again, more like I don't want to is there another easier option?
    Once I create the new Spanish project using Encore CS4 I don't know how to prompt Encore to attach the English DVD content with all the functionality of menus, chapters and links. I can attach movies, assets, etc. Can I attach anything else? This is what the DVD has inside:
    16 objects: 1.45 GB
    Video_TS folder
    Audio_TS Folder
    Average_files folder
    Common folder
    Good_files folder
    Poor_files folder
    Win folder
    Autorun File
    Average HTML document file
    Disc.id ID file
    Good HTML document file
    IG87 Word Document file
    Install InterActual file
    Poor HTML document file
    Poster PDF file
    Readme TXT file
    > Interactual Player is a file that the past DVD creator used to help the viewer go from Laptop video to web pages, etc. really annoying since you have to download to your hard drive as soon as the DVD starts.
    Thanks for your time.
    VDOMSTR

  • How to set PS for the most reliable image previews and how to make sure the color spaces are the same across plateforms

    I've been having an ongoing problem with some of my images changing color/luminance values after merging or flattening an image. This seems to most often happen if I use one of the filters (like crosshatch or notepaper, not sharpen or blur). I can make a copy using command/option/shift + E which most often will look exactly like what's on screen.
    Some people have suggested that it's to do with resolution, PS showing me a low resolution image but I don't think so because the histogram changes -- sometimes in a big way, but most often those spikes in the luminance levels are shaved off. Also, when I have the image open at 100% and effect a merge/flatten, the color changes.
    I'd like to know if there's a way to have PS show me one for one what I'm working on while I'm working on it, or if there is a way to control the color profiles when I'm saving. My best guess at this point is that there is a color profile mismatch going on somewhere. I just don't know where to look for it.
    Typically I work in 16 bit, so my color space is set to ProPhoto RGB; my camera is set to the Adobe color space;
    color management policies are set to preserve color profiles;
    conversion options --> intent is set to relative colorimetric.

    But it is calibrated. I use Xrite 1 and update it every month (on the first).
    The colors can be really off. Here's an example.
    https://flic.kr/p/r6A1Zd (what I want) https://flic.kr/p/qc5QTD (not what I want)
    Also, I can't see how the bit depth will have any effect since the change in color happens in PS when I merge or flatten. It's 8 bit through the editing and 8 bit when I flatten it.
    Have you any suggestions on what I can do on the computer side?

  • TS2755 Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help of how to set up messages on each

    Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help on how to set up messages on each device separately and to start using messages app on each device independently. Thanks

    search google for "iphone remove picture from contact"

  • I am having email problems with the new Lion.  stmp, imap, etc. I have looked up google info and It is confusing when it comes to TS, SSL also, please explain how to set it up so my email goes out and comes in securely.  Help

    I am having email problems with the new Mountain Lion.  stmp, imap, etc. I have looked up google info and It is confusing when it comes to TS, SSL also, please explain how to set it up so my email goes out and comes in securely.  Help
    Incoming Mail (IMAP) Server - requires SSL:
    imap.gmail.com
    Use SSL: Yes
    Port: 993
    Outgoing Mail (SMTP) Server - requires TLS:
    smtp.gmail.com (use authentication)
    Use Authentication: Yes
    Use STARTTLS: Yes (some clients call this SSL)
    Port: 465 or 587
    Account Name:
    your full email address (including @gmail.com) Google Apps users, please enter username@your_domain.com
    Email Address:
    your full Gmail email address ([email protected]) Google Apps users, please enter username@your_domain.com
    Password:
    your Gmail password
    The Quick Answer
    Follow the instructions below to set up IMAP1 access in most email clients.
    Google Apps users, please follow the default instructions unless otherwise noted, replacing 'your_domain.com' with your actual domain2 name.
    this is all greek to me. WHAT IS STARTTLS? On the first page of Apple set up there is a TLS certificate and it is marked NONE- should I change it to the long APPLE CERT option?  The next page under ADVANCED: THERE IS A BOX SSL MARKED.  Then IMAP Path Prefix - I put stmp.gmail.com.. is that right?  Port 993 can  use this one? as 456 doesn't work and 587 said it wasn't safe.  Under AUTHENTICATION I used PASSWORD.  Should I have used external client cert TLS?
    Please help me set this up securely. Thanks

    Apple - Support - Mail Setup Assistant

  • I was using same id on 2 iphones with no problems suddenly everything got mess, how can i set a new id w.out losing my contacts?

    i was using same id on 2 iphones with no problems suddenly everything got mess, how can i set a new id w.out losing my contacts?

    I believe because you migrated from a Nokia to an iPhone you need to register the Bn phone number with your Apple ID so it can be used for iMessage. The Pn number seems to be the only one registered
    Go here > https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
    Manage your Apple ID and see if that does the trick
    Hope that helps

  • How to set target to Play button on begining DVD

    Man you dont use this program for a few months and you gotta take a course on it all over again.
    Ive completely forgotten how to set the PLAY button to activate at the beginning of the DVD. As in I was burning several DVDs and I tested them on my computer, and they worked fine. But the whole time I was using my mouse to navigate (I only put in one button "PLAY"). When at one point I happened to use the DVD navigator I realized I hadnt set it for a stand alone. So while if you watched it on a computer and were using your mouse you could hit the play button. But on a stand alone you cant get to it with a remote.
    I remember it being a simply thing, but for the life of me I cant figure it out. HELP!

    So are you talking about moving between the buttons on a menu screen (i.e. navigation in the menu) or are you saying you can't get the button to activate any video? Or both?
    The first issue is sorted out with the 'Settings' drop down box and choosing 'assign buttons now' or 'auto assign buttons' (but this slows down the menu creation and gets really frustrating at times). You should then be able to get to the menu (which will have the first button highlighted and ready by default) and then use the handset to move from button to button.
    The second bit is setting the target for the button - where it goes to once you select and activate it. Open up your menu in DVDSP and click on the buttons in turn. Look in the property inspector for the 'target' and make sure that each button is going where you intend.
    Alternatively, use the connections tab - this is far faster, IMO, but is slightly more abstract in concept...
    If you have done these things and you still cannot get to the button using the remote control then there is something else wrong - it could be that you simply forgot to create a button but have the text there ready... without the button rectangle being drawn out over the text (or next to it) there will be no button and no way to activate anything.

  • I can not get real audio player to record videos from the internet, I believe the problem is that my Firefox browser is set for 64 bi... i need to change it to 32 and do not know how.

    I can not get real audio player to record videos from the internet i use firefox as my browser on windows 7, I believe the problem is that my Firefox browser is set for 64 bi... i need to change it to 32 and do not know how.

    dont know what to do

  • How to set white spaces between the fields in dataset??

    Hi all,
    I am writing a set on information to from infotypes to a text file. Its a fixed width file. How do set white spaces in the fields for dataset?
    Example:
    TYPES: begin of header,
                    filler(40)  type c,
                    id(3)        type c,
                    filler2(7) type  c,
                    delimiter  type  c,
                 end of header.
    DATA header type header.
    header-filler1 = ' '.
    header-id       = '100'.
    header-filler2 = ' '.
    header-delimiter = cl_abap_char_utilities=>newline.   ( do it to get a new line)
    my_table = header.
    append my_table.
    DATA: out_file(256) type C,
          codepage_ref type ref to CX_SY_CONVERSION_CODEPAGE,
          out_char type c,
          size type i,
          insert_string type string,
          insert_size type i.
      out_file = filename.
      open dataset out_file for output in text mode ENCODING NON-UNICODE.
      LOOP AT my_table.
        size = strlen( my_table ).
        insert_string = ''.
        DO size TIMES.
          offset = sy-index - 1.
          try.
              out_char = my_table+offset(1).
              IF out_char = SPACE.
                CONCATENATE insert_string '' INTO insert_string SEPARATED BY SPACE.
              ELSE.
                CONCATENATE insert_string out_char INTO insert_string.
                transfer insert_string to out_file NO END OF LINE .
                insert_string = ''.
              ENDIF.
            catch CX_SY_CONVERSION_CODEPAGE.
              insert_size = strlen( insert_string ) - 1.
              insert_string = insert_string(insert_size).
          endtry.
        ENDDO.
       transfer CL_ABAP_CHAR_UTILITIES=>NEWLINE TO out_file NO END OF LINE.
      ENDLOOP.
      close dataset out_file.
    How do I get to insert the space for filler1 and filler2?
    Edited by: Siong Chao on Oct 4, 2011 4:56 AM
    Edited by: Siong Chao on Oct 4, 2011 8:27 AM
    Edited by: Siong Chao on Oct 4, 2011 8:29 AM

    problem lies in the open dataset codes
    Used:
    open dataset out_file for output in text mode encoding non-unicode message msg.
    if sy-subrc= 0.
    loop at my_table.
    transfer my_table to out_file
    transfer cl_abap_char_utilities=>newline to out_file no end of line.
    endloop.

  • How to set the default profiles in pi i have a problem

    hi friends
    can any one give me the solulation for this problem
    Exception class: com.sap.aii.utilxi.prop.api.PropertiesException
    Unable to read configuration data (ExchangeProfile/aii.properties)
    Exception Details
    Exception class: com.sap.aii.utilxi.prop.api.PropertiesException
    Message
    Unable to read configuration data (ExchangeProfile/aii.properties)
    Stacktrace
    Thrown:
    MESSAGE ID: com.sap.aii.utilxi.prop.api.rb_all.NO_PROPERTIES
    com.sap.aii.utilxi.prop.api.PropertiesException: Unable to read configuration data (ExchangeProfile/aii.properties)
         at com.sap.aii.utilxi.prop.api.PropertySourceFactory.initServerMode(PropertySourceFactory.java:202)
         at com.sap.aii.utilxi.misc.api.AIIProperties.initServerMode(AIIProperties.java:401)
         at com.sap.aii.ib.server.applcomp.StartupServerProperties.initPropertiesForServer(StartupServerProperties.java:95)
         at com.sap.aii.ibrep.server.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:152)
         at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:33)
         at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponentImpl.startup(ExplicitApplicationComponentImpl.java:116)
         at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponents.startup(ExplicitApplicationComponents.java:383)
         at com.sap.aii.ib.core.applcomp.ApplicationComponent.startup(ApplicationComponent.java:209)
         at jsp_Main1198312518875._jspService(jsp_Main1198312518875.java:21)
         at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
         at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
         at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Error History, Build Info, Generic Application Info
    plz help me i could not do any work
    how to set the defult profiles
    raja

    Please look at this thread. This might resolve your problem.
    Unable to read configuration data (ExchangeProfile/aii.properties)
    -Pinkle

  • How to set space between the fields in SearchPG- Display issue

    Hi Friends
    I Have created a searchPG with a QueryRN , In my searchPG i have some display issue after running the page its looks like this
    For Example assue its a page with 3 field and one table region
    Employee no
    Employee name
    Phone no
    ResulttableBut i want my searchPG should hav some space between two field as shown below
    Employee no
    Employee name
    Phone no
    ResulttablePlease adviice me
    I appreciate all ur advice
    Thanks
    A.T

    Hi Peddi
    In my structure pannel I have simpleSearchPanel below that only i have the two lov fields ex: emp_no and emp_name . how to set the spacer between this From which Region where can find the spacer bean what proerty do i need to set
    Thanks
    AT

  • Anyone know anything about Apples Mail and British Telecom Yahoo and how to set it up as I am having no end of problems?

    Anyone know anything about Apples Mail and British Telecom Yahoo and how to set it up as I am having no end of problems?

    Apple - Support - Mail Setup Assistant

  • My airport extreme has connected to a Tplink router, i set my AE in Create network, so i get a problem of Double NAT. How can i repair this probleme because i have to use TPlink for my IP TV and i want to use AE to creat my network and the guest NW.

    my airport extreme has connected to a Tplink router, i set my AE in Create network, so i get a problem of Double NAT. How can i repair this probleme because i have to use TPlink for my IP TV and i want to use AE to creat my network and the guest NW. If we don't have a solution for this question, can i set my AE to use the IP TV and how??? I'm using a 4th Airport extreme

    No, not unless it is simply a network connection.
    How is your IPTV being provided.. if it is using a separate vlan or separate vpi/vci in the adsl connection. Who is your ISP?
    Is the TP-Link ADSL?
    Is the IPTV using a separate voice channel on adsl?
    Or a different vlan.
    Sorry but it is something where a definite answer is not possible unless you provide all the details.
    The setups are unique to each ISP around the world..
    Here is one for our local ISP.
    http://www.avenard.org/iptv/Setup.html
    He has a section on getting this working with apple router over wireless.. look
    http://www.avenard.org/iptv/IPTV_and_Wireless.html
    Google around and see if other people have had success.. the whole setup is tricky.. and it is hard if nobody has used it who actually understands networking.

Maybe you are looking for