Problems reinstalling...Windows 7...Need help

I have problems after I updated my flash player. I've done everything the guide said to do in Installation Problems; The last thing was to uninstall it and reinstall. While now I can't install the Flash Player at all. It keeps error out. Now I'm really stuck and need someones help. HELP PLEASE !

What is your operating system & version?
What is your web browser?
What exactly means "error out"?

Similar Messages

'Easy Set-up' Option - Problem with edit canvas/windows - really need help!

Hello Everyone. . .
Have a problem that i really need help with, i have tried so many different things to sort this - but with no sucess.
I usually work in High Definition and i have recently done a small project for someone in DV. When changing to work in DV, i selected the DV setup from the 'Easy Setup' menu. I have now changed back to HD and there are a few things different with Final Cut that i can't shift!
When i move a clip from the capture bin into the edit window, the clip no longer fills that window like it always used to and there are lines at the top and the bottom of the clip - almost like it is in widescreen.
Editing like this wasn't too much of a problem, but when i came to compress and do a final render of the whole film - there was the same black lines on the top and bottom of the film.
I can't figure out how to get the setting back to how they were, and have the clips fill the edit windows and fix the end render/compress.
Any ideas from anyone on what i am experiancing with all this? And. . . how to fix this problem?
Any help on all this will be very much appreciated!

Hello Everyone. . .
Have a problem that i really need help with, i have tried so many different things to sort this - but with no sucess.
I usually work in High Definition and i have recently done a small project for someone in DV. When changing to work in DV, i selected the DV setup from the 'Easy Setup' menu. I have now changed back to HD and there are a few things different with Final Cut that i can't shift!
When i move a clip from the capture bin into the edit window, the clip no longer fills that window like it always used to and there are lines at the top and the bottom of the clip - almost like it is in widescreen.
Editing like this wasn't too much of a problem, but when i came to compress and do a final render of the whole film - there was the same black lines on the top and bottom of the film.
I can't figure out how to get the setting back to how they were, and have the clips fill the edit windows and fix the end render/compress.
Any ideas from anyone on what i am experiancing with all this? And. . . how to fix this problem?
Any help on all this will be very much appreciated!

My daughter has spitefully changed my password and has refused to tell me. I have so much medical information that I can not lose. Is there anyway to get around this problem. Please I need Help fast.

My daughter has spitefully changed my password and has refused to tell me. I have so much medical information that I can not lose. Is there anyway to get around this problem. Please I need Help fast.

Connect the iPod to your syncing computer and restore it via iTunes. However, if iTunes asks for the unknown passcode you need to place the iPod in recovery mode and then restore the iPod from backup. For recovey mode see:
iPhone and iPod touch: Unable to update or restore
"If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone and iPod touch software."
Above is from:
http://support.apple.com/kb/ht1212

T400 + WIndows 7, need help with drivers

Hello.
I have just installed a copy of W7 Pro on my T400 but i got some devices in the device manager which i do not know what is.
I Have installed "everything" from http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-72858
but I could not install the following:
-Local Manageability Service and Serial Over LAN (Intel AMT 4.0) Windows Vista, XP
-Management Engine Interface (Intel AMT 2.6) Windows Vista, XP
The first i managed to install by going to the intel site and download the newest version but the second one wont install nor will the version on the intel download site.
So far i have the following devices missing drivers:
3xBase System Device
PCI Serial Port
PCI Simple Communications Controller
Hope you guys can help me.

Hi Wouz,
I am sorry that the windows 7 drivers are not fully released yet but we have some beta version of drivers. Please check if you can find what you need here. However, it does not cover all of Lenovo products as yet. Lenovo has a large amount of product models to support. Please bear with us and we shall release the drivers soon after the Windows 7 launch in 22nd Oct 2009.
Thank you very much for your patience.
Best regards,
Cleo
WW Social Media
T61, T410, x240, Z500, Flex 14
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Problems with exporting. Need help fast

So I recorded some video game footage (Battlefield 4) and when I look at the raw file, it says it's 1920x1080. I edited it and finished it and even if I look in info it says that it's 1920x1080.
But when I try to export the video it says that the source file is 1280x1080
So when I export it, it is in REALLY bad quality and I usually upload high quality videos! What do I do? I need help, fast! I have Adobe Premiere Pro CS6.
I have a i7 3770k CPU so I don't think that is an issue. 8GB of ram aswell.

Quickest way:
Get Started with Premiere Pro
New to Premiere Pro? Get started with your first project — editing a video. In less than an hour, you'll learn to edit together different types of media to tell a video story.

Adobe Acrobat Pro 9 crashing in Windows Vista - Need help

Hi,
I have installed Adobe Acrobat Pro 9 in my system which has OS Windows Vista with SP1 and everytime I open a pdf using my newly installed adobe acrobat it crashes.
The general trend it after 10 seconds from opening that pdf file, it just automatically closes itself. I checked the system process and didn't see the adobe process running after it closed itself. So I feel it just crashes for some unknown reason.
I have 1440 X 900 resolution. Don't know if that can be a problem, but I have tried reducing the resolution too but with no help.
Can anyone help me solve this problem.

Since this is a USER TO USER forum, not Adobe support, and as the
only way another user could reply is if they had that exact problem
and also had a solution, you may need to contact Adobe for help
In the US - Adobe General support 800-833-6687
In the US - Adobe Install Problems 800-642-3623

Many Problems with Ipod! Need Help =[

Ey um there has been lots of issues with my Ipod!! (5th gen 30gigs)
Conditions:
-Ipod skips songs when playing(the songs arn't corrupted)
-Ipod freezes occasionally when viewing photos or playing music
-Ipod at times wont show on itunes 7
-When Ipod has connected to computer, and shown in Itunes, Itunes call my Ipod “Ipod” when it is supposed to be called “RnA”(and it won’t restore…Either my computer freezes or it would go on 4evr but not restore)
-When trying to turn on Ipod, a msg appears “Use Itunes to restore” When I plug and connect to Itunes, It says This Ipod needs to be reformatted for your pc. ( when I press update, my computer freezes, or would take forevr…and not update
-When I try to restore my Ipod my computer freezes or it would take forevr but not work
My questions:
-I bought my Ipod during the summer, and it was bought online from my dad, but he accidentally threw receipt away…Can I still replace my Ipod? Or find repairs?
-Where is the nearest Apple store in SanFrancisco?! I can’t find any!
-HOW DO I FIX MY IPOD?! T.T
What Happened:
Ok, last month, my Ipod was working perfectly until one day it froze… So I reset it. But after a few days when I connect my Ipod to my computer, it charges and everything is fine, but when I click disconnect Ipod on Itunes, or Disconnect when using Safely Remove Hardware…It works but then my Ipod still says Do not disconnect. But I disconnected it anyway and reset it. And it was working. And I have been having this problem a lot wen I updated to Itunes 7.
Then 2-3 weeks later, my Ipod started having many problems… It would skip songs even though my songs aren’t corrupted… And when I look at photos, It would freeze for around 20 seconds, and my Ipod turns laggy. So I reset it and it’s ok but then it happened again the next day. And these problems kept going on but I ignored it T.T
And now, I can’t use my Ipod at all! It says I need to use itunes to restore…So when I connect it to my computer, It would appear on Safely remove hardware, but Itunes would pop up and have no Ipod in it. So I tried disconnecting and reconnecting around 5 times. Then it worked! Except, Itunes call my Ipod “Ipod” wen it is supposed to be called RnA. And I try to restore it but it wont work! Please help me! ASAP! T.T and thanks!
Ipod with video (5th Gen) with 30 gigs Windows XP

Please don't shake it. It has a hard drive in it and by doing that you may damage the heads. That is the clack noise the heads hitting the platter. Not a good thing.
Go here to start a service request.
http://depot.info.apple.com/ipod/
They will send you a box pre-paid to send it back in with. If you need a copy of your receipt Amazon customer service should be able to help. I have never been asked for one but you never know. If you have the packing slip from amazon? This can be used as a proof of purchase.
Mort

Any problems running Windows 7-created help output on Windows XP machines?

Hi,
I feel a bit silly even asking this, but I'm not a coder and don't have the technical knowledge to know for sure that it's a silly question.
Background: We are upgrading to Windows 7 from XP in the near future. We will be using RoboHelp 10 and Word 2010 - at least that's the plan ...
For our department's major product, since it's big and has been around a long time, we are still stuck using RoboHelp for Word to generate WinHelp. We then use the RHelp for Word source to generate WebHelp, since some modules of the product require WinHelp, some require HTML pages, and much of the source material is needed in both outputs. And yes, I did read someone's post likening this process to drinking coffee while running a sprint - believe me, if I had any choice about this I wouldn't be doing it. If RoboHelp has added the capability to generate WinHelp from RoboHelp HTML, let me know .
Anyway, because of previous weird experiences after upgrades, I am being asked to find out: Has anyone used RoboHelp for Word to generate help output - .hlp or .chm or HTML pages - on a Windows 7 machine and tested it on a Windows XP machine? If so, were any problems observed?
Assuming we can still creak along with RoboHelp 10 to generate the same antiquated output ... which we can, right?? ... my gut tells me that a file is a file and I can't see why an .hlp file or web-based help files that run on Windows 7 wouldn't run on XP. But again, I don't have the technical knowledge to say this for certain.
Any advice appreciated. Thank you - Sandy
Message was edited by: sdryer

Creating an output on a later OS does not affect its ability to be used an older OS. The issue, as you know, is creating winhelp to be used on Windows 7 or 8. That forces each user to download a file to support winhelp.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Windows user needs help connecting PS2

Please, I'm begging for some help. Here's my situation:
I'm a windows user (I know, I'm sorry). My set-up is this. I have a DSL modem connected to a D-LINK DI-614+ wireless router. I have a laptop running Windows XP. I bought an Airport Express for two reasons:
My office is where my wireless router is connected. My PS2 is in the living room, along with my stereo. I want be able to BOTH stream music from iTunes to my stereo, AND use the Airport Express to connect my PS2 to the internet. I hate having to run a 100 ft. ethernet cable across the house to get online.
How do I set this up?
Thanks,
Rob

Sorry... but you can't do this.
The ethernet port on the Airport Express is only active when the Airport Express is configured as a remote base station in a wireless distribution system (WDS). Problem is, your D-Link wireless router does not support Apple's implementation of a WDS. You must use your Airport Express in wireless client mode with your D-Link wireless router - a mode in which Airtunes may be streamed to the Airport Express, but the Airport Express ethernet port is inactive.
You will need to use different method of connecting your PS2 to your wireless network. Linksys, D-Link, and Netgear all sell "wireless game adapters" designed specifically for this purpose.

SCCM Clients stuck downloaded Windows Updates(Need Help)

I am using SCCM 2007 software update for my site. I created a deployment for windows XP patches and it applied successfully on the collection. But now i am seeing in Enforcement states for a deployment, Clients are stuck "downloaded Update(s)" stage,
I have check client logs also but does not find any error.
Can any one help me out over this
Regad
Sachin

Kindly stop trying to bump your post by entering information that doesn't help anyone. On the client side what does it look like. Does the patch say failed when it installs? Do the client even see anything. You can stop the Windows
Update service. Delete the software distribution folder and restart it and it should recreate the folder and attempt to download the patches again and install. Remember the community is here to help when possible. By your posts I assume this
is an emergency so you might want to contact CSS, searching the internet or find a private consultant that could help you faster than we could. Sometimes there just isn't enough information for us to fix a problem. I have seen this problem
every month and every month a machine has a different problem as to why the error occurs. It could be
Previous required patch is broken
Windows update is messed up
WMI issue
Patch downloaded is corrupt. Delete the cache folder and see if the client will retry
Machine simply needs a reboot and it will complete whatever it is doing, retry and install
Client needs to be repair
Take a step back from the problem and write down some problems/solutions so you can track what you are doing and so you can find a direction.
http://www.sccm-tools.com http://sms-hints-tricks.blogspot.com

Adobe Reader in browser window disappearing-need help

I have created a word document (WD1) containing links to other word documents (WD2, WD3, etc). I then turned WD1 into a .pdf file. I then upload this .pdf file to a web page. I go to this webpage and click the link to open the WD1.pdf file. When I click the WD1.pdf link on the webpage, a new browser window opens with Adobe reader in it displaying WD1.pdf. so far so good. Now when I click on the links to WD2 or WD3, these links open in Word and the correct files display, but the browser window containing WD1.pdf file disappears (thats the best way to describe it) and the first webpage is still open.
What I am trying to achieve is to have the second browser window stay open so the trainees using this web page will be able to click on the other references on the .pdf to get to all of the links without having to re-open it each time.
I have Researched in help and web forums, the only reference I can find is to uncheck the box next to Open cross-documents in the same window in preferences in Adobe. Which I have done and restarted my computer. I also noticed a preference show each document in its own window which is checked.
Here is the other rub, I have a desktop computer (OS is XP) and a laptop (OS is vista). I have Adobe 8.1.2 installed on both. The laptop with vista works the way I would like. But the desktop computer with XP does not. I did have Adobe 7.0.9 on the desktop but when it did do what I wanted I upgraded to 8.1.2 and it still isnt working. The real problem is that most of the trainees will be using their work computers with XP. I dont know even know if there is any significance in this observation or not. But thought I would throw it out there.
Does anyone have any suggestions of things I could try or know of any solutions? Please help.

There is a technology on Labs called BrowserLab that is designed to assist with browser compatibility. Is this question regarding BrowserLab or is the question more general?

Install Oracle Application Server 10.1.3.1 on Windows Vista, need help

Dear gurus,
When i installed (double klik on setup icon) Oracle App. Server 10g (10.1.3.1) on windows vista, it gave me error,
"checking operating system version : must be 5.0, 5.1 or 5.2. Actual 6.0
Failed<<<<"
please help, what should i do ?

Hi Andes,
I got the same problem as yours. Please post your oraparam.ini for me to copy. Thanks a lot.
andrew.

Printing problem with Photoshop cs4, need help

I'm using PS CS4, with a Canon Pixma iP4200 and Mac os 10.6.2. I CAN print from other programs such as TextEdit or Pages. And my printer prints a test page without any problems. However, when I try to print something from PhotoShop, the printer dialogue box opens, I see the image in the preview and the page rolls through my printer...without anything on it. Does anybody know the reason for this?? Thank you for your help.

I haven't heard of anyone else with those specific symptoms.
But another poster has had problems with his Canon 9900 not printing (but no blank page).
The first thing to do is make sure you are using the Canon drivers and not the GutenPrint/GimpPrint drivers.
After that, you probably need to check with Canon.

My Safari is suddenly opening strange tabs when I am trying to open something else. I have never had this problem before and I need help please, I don't know how to stop this happening

Hi there,
I have had my Macbook for 18 months and have never experienced this problem with strange windows suddenly opening in Safari. I know this happens on windows 8 computers a lot, and it has never happened on my Macbook before.
Please can someone tell me how to get rid of these. I have reset my Safari and rebooted my computer, and don't know what else to do. This is very frustrating, as I cannot just do what I need to do.
Thank you
Cheryl

I'm pretty sure you've got adware installed on your Mac. Please download and install adwaremedic: www.adwaremedic.com
This will remove most know adware plugins for you.

CS4 Install errors in Windows 7 - Need help!

I just got this great new ASUS G73JW laptop with windows 7 home premium on it, 8 gigs of Ram, Intel Core I7, Nvidia 480 video card. One of my biggest reasons for getting it was to run CS4 Master Collection on it so i can work from the road. However, each time I try installing CS4 I get the same errors about certain applications not being installed. It comes up with an error and says "could not install the following applications" and of course all the applications it can't install are Photoshop, Flash, Premere, After Effects, etc. Bascally none of the programs will install with the exception of Media encoder, flash player and media player.
I've gone on the interenet to find help and have tried using the clean tool to clean out the entire installation, I tried running it in different modes for Vista, and XP but everytime it comes up with the same errors. Can anyone help with some ideas on how to install this successfully?

I'm having a similar problem. I'm trying to load CS4 Design Premium onto a Toshiba i7 running Windows 7, 4GB ram. An installation error appears about halfway through Disk 1. Photoshop, Dreamweaver, InDesign, and Illustrator will not install. Adobe Support Advisor identified the error as UninstallColorProfilesRollback and referred me to kb403891.
I was unable to follow Solution 1 because I didn't have permission to remove the files. I followed Solution 2, but was still unable to remove the files described in solution 1.
I would appreciate any possible assistance.

Problem with FocusTraversalPolicy.. need help asap!!!!

I have Panel with six text fields. I have another subpanel with another three text fields placed on this main panel. I want to create a FocusTraversalPloicy in a way .. that the focus goes to the first field in the subpanel from the third text field of the main panel. And from the last text field of the Subpanel the focus should go to the 4th text field of the Main Panel. Help needed asap.
TIA,
BT

Hi,
main panel
- text field 1
- text field 2
- text field 3
- text field 4
- text field 5
- text field 6
- sub panel ( text field 7, text field 8, text field 9 )
focus seguence:
text field 1 ->text field 2 ->text field 3 ->
text field 7 ->text field 8 ->text field 9 ->
text field 4 ->text field 5 ->text field 6 ...
//----------------- CODE ----------
import java.awt.*;
import javax.swing.*;
public class TraversalPolicyDemo1 extends JFrame
JPanel mainPanel = new JPanel();
JTextField txtField1 = new JTextField();
JTextField txtField2 = new JTextField();
JTextField txtField3 = new JTextField();
JTextField txtField4 = new JTextField();
JTextField txtField5 = new JTextField();
JTextField txtField6 = new JTextField();
JPanel subPanel = new JPanel();
JTextField txtField7 = new JTextField();
JTextField txtField8 = new JTextField();
JTextField txtField9 = new JTextField();
public TraversalPolicyDemo1()
this.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
this.mainPanel.setFocusCycleRoot(true);
this.subPanel.setFocusable(false);
this.mainPanel.setFocusTraversalPolicy(new MyFocTrPol());
init();
private void init()
JPanel contentPane = (JPanel) this.getContentPane();
GridLayout gridLayout = new GridLayout();
gridLayout.setRows(7);
gridLayout.setColumns(1);
gridLayout.setHgap(10);
gridLayout.setVgap(10);
mainPanel.setLayout(gridLayout);
txtField1.setText("11111");
txtField2.setText("22222");
txtField3.setText("33333");
txtField4.setText("44444");
txtField5.setText("55555");
txtField6.setText("66666");
txtField7.setText("77777");
txtField8.setText("88888");
txtField9.setText("99999");
this.subPanel.add(txtField7);
this.subPanel.add(txtField8);
this.subPanel.add(txtField9);
mainPanel.add(txtField1, null);
mainPanel.add(txtField2, null);
mainPanel.add(txtField3, null);
mainPanel.add(txtField4, null);
mainPanel.add(txtField5, null);
mainPanel.add(txtField6, null);
mainPanel.add(subPanel, null);
contentPane.add(mainPanel, null);
public static void main(String[] args)
try
UIManager.setLookAndFeel(UIManager.getSystemLookAndFeelClassName());
catch(Exception e)
e.printStackTrace();
TraversalPolicyDemo1 frame = new TraversalPolicyDemo1();
frame.pack();
frame.setVisible(true);
}// end class TraversalPolicyDemo1
import javax.swing.*;
import java.awt.*;
public class MyFocTrPol extends LayoutFocusTraversalPolicy
public Component getComponentAfter(Container focusCycleRoot, Component aComponent)
Component ret=null;
Component first = focusCycleRoot.getComponent(0);//txtField1
Component second = focusCycleRoot.getComponent(1);
Component third = focusCycleRoot.getComponent(2);
Component fourth = focusCycleRoot.getComponent(3);
Component fifth = focusCycleRoot.getComponent(4);
Component sixth = focusCycleRoot.getComponent(5);//txtField6
Container seventh = (Container)focusCycleRoot.getComponent(6);//sub panel
Component sub_first = seventh.getComponent(0);//txtField7
Component sub_second = seventh.getComponent(1);//txtField8
Component sub_third = seventh.getComponent(2);//txtField9
if (aComponent.equals(first))
ret = second;
else if (aComponent.equals(second))
ret = third;
else if (aComponent.equals(third))
ret = sub_first;
else if (aComponent.equals(fourth))
ret = fifth;
else if (aComponent.equals(fifth))
ret = sixth;
else if (aComponent.equals(sixth))
ret = first;
else if (aComponent.equals(sub_first))
ret = sub_second;
else if (aComponent.equals(sub_second))
ret = sub_third;
else if (aComponent.equals(sub_third))
ret = fourth;
return ret;
}// end getComponentAfter
public Component getComponentBefore(Container focusCycleRoot, Component aComponent)
Component ret=null;
Component first = focusCycleRoot.getComponent(0);//txtField1
Component second = focusCycleRoot.getComponent(1);
Component third = focusCycleRoot.getComponent(2);
Component fourth = focusCycleRoot.getComponent(3);
Component fifth = focusCycleRoot.getComponent(4);
Component sixth = focusCycleRoot.getComponent(5);//txtField6
Container seventh = (Container)focusCycleRoot.getComponent(6);//sub panel
Component sub_first = seventh.getComponent(0);//txtField7
Component sub_second = seventh.getComponent(1);//txtField8
Component sub_third = seventh.getComponent(2);//txtField9
if (aComponent.equals(first))
ret = sixth;
else if (aComponent.equals(second))
ret = first;
else if (aComponent.equals(third))
ret = second;
else if (aComponent.equals(fourth))
ret = sub_third;
else if (aComponent.equals(fifth))
ret = fourth;
else if (aComponent.equals(sixth))
ret = fifth;
else if (aComponent.equals(sub_first))
ret = third;
else if (aComponent.equals(sub_second))
ret = sub_first;
else if (aComponent.equals(sub_third))
ret = sub_second;
return ret;
}// end getComponentBefore
public Component getDefaultComponent(Container focusCycleRoot)
return focusCycleRoot.getComponent(0);//txtField1
public Component getFirstComponent(Container focusCycleRoot)
return focusCycleRoot.getComponent(0);//txtField1
public Component getLastComponent(Container focusCycleRoot)
return focusCycleRoot.getComponent(5);//txtField6
public Component getInitialComponent(Window window)
Component def = getDefaultComponent(window);
if (def == null && window.isFocusableWindow())
def = window;
return def;
}// end class MyFocTrPol

Problems reinstalling...Windows 7...Need help

Similar Messages

Maybe you are looking for