Problems; related to 3.0 upgrade???

It seems that since I've upgraded to 3.0, my phone is really struggling. My battery life has significantly decreased , my phone won't hold (or find) my wi-fi, my voicemails and texts don't pop up in a timely fashion and the phone locks up requiring a reboot at least once a day. Also, I've been dropping a
lot of calls and if I drive through an area where there is no signal, the signal status gets "stuck" in a searching mode that seems to only clear with a reboot.
Any thoughts or advice? I love the new software and hope there is a fix. Any help is appreciated and thanks
in advance.

Sync your iPhone with iTunes to update your iPhone's backup and any data that is kept synchronized. If you haven't already done so, import all photos from your iPhone's camera roll.
Restore your iPhone with iTunes as a new iPhone or not from your iPhone's backup as a test to see if doing so resolves the problems.

Similar Messages

  • HT4623 Is this the most up to date article on up dating the iPhone - it there anything about the problems relating to the up date to OS 6 - my G3 no longer works and Apple seems to have gone to ground.  No Genius bar appointments available for a week!

    Is this the most up to date article on up-dating the iPhone OS - is there anything about the problems relating to the up-date to OS 6 - my G3 no longer works and Apple seems to have gone to ground.  No Genius bar appointments available for a week!

    iOS 7 devices need iTunes 11.1 or newer to sync.  Depending upon your computer and the OS it is running, you may not be able to upgrade to iTunes 11.1 based on the requirements for iTunes 11.1.  What computer and OS are you running your iTunes on?  From the iTunes download pages I see the requiorements are:
    Macintosh System Requirements
    Mac computer with an Intel Core processor
    OS X version 10.6.8 or later
    400MB of available disk space
    Broadband Internet connection to use the iTunes Store
    Windows System Requirements
    PC with a 1GHz Intel or AMD processor and 512MB of RAM
    Windows XP Service Pack 2 or later, 32-bit editions of Windows Vista, Windows 7, or Windows 8
    64-bit editions of Windows Vista, Windows 7, or Windows 8 require the iTunes 64-bit installer
    400MB of available disk space
    Broadband Internet connection to use the iTunes Store

  • All my photos in the iphoto have disappeared, not sure if this related to any iphoto upgrade or other issue, tried to find the photos through the finder (JPG or photo) but failed, can you help me to get back my photos please?

    All my photos in the iphoto have disappeared, not sure if this related to any iphoto upgrade or other issue, tried to find the photos through the finder (JPG or photo) but failed, can you help me to get back my photos please?

    Help us to help you: There are 9 different versions of iPhoto and they run on seven different versions of the Operating System. The tricks and tips for dealing with issues vary from version to version and OS to OS. So before anyone can help, they need information to work with. Basic stuff:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. What were you doing when the problem arose?
    - Did it ever work properly?
    - Are there error messages?
    - What steps have you tried already to solve the issue.
    Anything else you can think of that might allow someone else to understand your issue.
    With this kind of information somebody can develop a starting point for troubleshooting the issue.
    Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that any helper is simply guessing. More information means you get better assistance. (And no, more exclamation marks do not get help faster or make your issue seem urgent. They just make it seem like you have a stuck key )

  • Problems with apex 4.0 upgrade

    Hi,
    I have a pretty large application build in apex 3.1.2 that comes up with sereral errors after upgrading..
    First there is "popup key lov".. It cant return a value when clicked..
    Then there is updateable reports. It doesnt seem to work at all.. There is lots of errors regarding that one.
    What I was wondering is whether these problems will be solved in a patch or if we have to do it ourselves? It seems to be problems related to the template, so I guess it will be difficult to solve with patches?
    The app is build from theme: Blue Gray - 13 *
    We also use apexlib, which might also cause some of the problems I guess.

    Hi Patrick,
    I know its not much im giving you. The thing is we have the app installed in a developer server and a production server, and both of these are now running 3.1.2, since we couldnt get 4.0.1 to work. The customer who has both servers didnt want us to use too much time on the upgrade, so we had to downgrade the developer server again.
    So the following is only based on my memory.
    It is correct what is written above that the LOV is corrected by removing the apex_lib js file.
    when it comes to the updateable report I remember that the first thing I tried was to change some substitution variables in the Standard reports template. What i did was comparing the template to one of the new templates, and I saw some differences in the variable names. That did help some, but didnt solve all the problems. If I remember correctly, it made the add botton work again. And I beleive that a simple updateable report in our app started to work after this change, but the complex one didnt..
    I also tried to remove the old updateable report and replace it with the new one in apex 4. There is some new functionality there (add doesnt submit page f.x.). What happened then was that NO errors was reported at all, but nothing happened either when I submitted the page. The new lines in the report simply disappeared.
    After this the customer didnt want to spend any more time trying to upgrade, so we had to revert to 3.1.2. This was all done without the patch of apex 4. Then monday we tried upgrading again with the patch, and the problems seemed to be the same, so we quickly downgraded once again.
    What I could try to do is give you some of the code for the problematic page, if you think you can use it for anything? I can also give you an export of the template if you want that. Its based on Blue Gray - 13 from the first apex 3 release (I think)
    Thanks for listening
    Bjarke

  • The problem I have since I upgraded to Mavericks version 10.9.1 The problem appears only with Mail not with other programs, not even with my browser. When I try to zoom the text of an e-mail I received or sent , I can no longer use the keys Command   to e

    the problem I have since I upgraded to Mavericks version 10.9.1
    The problem appears only with Mail not with other programs, not even with my browser.
    When I try to zoom the text of an e-mail I received or sent , I can no longer use the keys Command + to enlarge the text, although I can reduce it with Command -.
    As I have a problem with my eyes, This is a serious matter for me.
    When I write an e-mail, if I select text and press Command +, it just displaces the text to the right.
    Now, my husband has a USB keyboard. If he connects it to my computer, his regular Command + does not work either, but  he uses the extended keyboard, then it works. Unfortunately, he needs it for a musical application which does not work with a wireless keyboard.

    Firefox 3.6.4 and 3.6.6 use a process called, "plugin-container.exe" which was using up most of my CPU when I opened up multiple tabs that contained Adobe Flash files, and caused Firefox to lock up.
    My solution was to use Firefox 3.5.10 which you can get from the Mozilla website at [http://www.mozilla.com/en-US/firefox/all-older.html]
    I am using Adobe Flash 10.1.53.64 without any problem in this version of Firefox. Check the release notes, I believe it contains all the latest security fixes in "Firefox 3.6.4".
    Hopefully, they will fix Firefox 3.6 in the next version (e.g. Firefox 3.6.7), until then you should probably use "Firefox 3.5.10".

  • Problem related to PS CS6 ext. on Mac.  Nikon DSLR D610 raw file can not be opened

    Problem related to PS CS6 ext. on Mac. Installation is OK but I can't open picture from my Nikon D610 (Raw NEF format). I get a message "can not open this format ...". Checking Help menu to see if I miss an update the message I get is that I'm up-to-date but at the end Nikon D610 (format supported of course) files can not be opened . JPEG are OK but I work with raw files. Thanks

    What OS are you running: 10.x.x?
    What version of the Camera Raw plug-in do you have?  Do (About) Plug-ins / Camera Raw to find out.
    You need at least ACR 8.3 to open D610 files.  If the Help / Updates process does not work, then there is a manual install process you can do.  The page with the download is for when people accidentally updated to ACR 8.4 and need to roll back to ACR 8.3 due to their OS being incompatible, but the installer on that page works even if you haven’t erroneously updated to ACR 8.4:
    http://helpx.adobe.com/x-productkb/multi/camera-raw-84-support-policy.html

  • Sound problems after iOS 4.2 upgrade

    Experiencing very poor sound quality after iOS 4.2 upgrade. Bad eq, left channel dropping out, sounds like heavy reverb. Exists with iPod and pandora apps. Tried adjusting eq in settings. Any one else having problems?

    Yep I just upgraded to new OS 4.2 on iPhone 4 and I get this static buzz sound when talking to people it's really annoying and sound quality is terrible. What happened? I went back to the shop and they said it's the upgrade and that there is an issue with it. They also said there is no point leaving the phone with them as they can't fix it that it's upto apple to release a patch for the problem. Can we get a fix for this soon before I damage my ears?

  • Reception / Battery problems with iPhone 3GS after upgrading to iOS 4.2.1

    There are major reception and battery problems with iPhone 3GS after upgrading to iOS 4.2.1.
    I can not believe that Apple did not test this for major bugs like this one is.
    I am a business user and can not effort to have bad reception. Apple wants to gain in the business clients... I never had this with my former BlackBerrys!
    I need a reliable phone not a play thing like this is right now, it just needs it to work propely. And if a major bug like this comes along, fix it immediately. After the iPhone4 story, now this...incredible! Going back to my reliable BlackBerry! It just ain't reliable and takes forever to fix a problem.

    I have the same issue after iOS 4.2.1 update. I am using iPhone 3GS officially unlocked by Apple. I tried using different SIM cards and both carriers show same problem when using phone in 3G mode. Phone falls back to EDGE mode showing 'E' from '3G' at start. I have reset the phone and rebooted several times and moved to different cell areas in the city just to verify the problem.
    I had no such issues earlier. I also have Nokia E71 which shows full signal and has no such issues.
    I have posted the bug on apple iphone feedback page. I hope they Apple will fix the problem and test the release properly on all models before releasing to public.

  • I'm using iPhoto 11, and instead of seeing my images in the main view, I see only outlines. (Had same problem in iPhoto 10 before upgrade to Lion Help!

    I'm using iPhoto 11, and instead of seeing my images in the main view, I see only outlines. (Had same problem in iPhoto 10 before upgrade to Lion Help!
    I'm on a Macbook Pro and all of my software is up-to-date.
    The photos and events, etc. appear to be present in my photo library, but I cannot see the actual images--only an outlined placeholder.

    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to rebuild the thumbnails. This can take 3 or 4 goes to work.

  • Problem with Generic Sync after upgrade

    Hi guru,
    I have this problem:
    I have done a upgrade ME2.1 -> MI2.5 SP18.
    I have a simple Generic sync application that using a simple Function Module:
    <b>
    function Z_ME_TEST_CONNECTION.
    ""Interfaccia locale:
    *"  EXPORTING
    *"     VALUE(STATUS) LIKE  BWAFSYHEAD-STATUS
    *"  TABLES
    *"      INBOUND_CONTAINER STRUCTURE  BWAFCONT
    *"      OUTBOUND_CONTAINER STRUCTURE  BWAFCONT
      perform CALL_OFFLINE_ME_METHOD using 'TEST_CONNECTION'
                                            INBOUND_CONTAINER[]
                                            OUTBOUND_CONTAINER[].
      OUTBOUND_CONTAINER-FIELDNAME = 'RESULT_CONNECTION' .
      OUTBOUND_CONTAINER-LINENUMBER = 0 .
      OUTBOUND_CONTAINER-FIELDVALUE = 'OK'.
      append OUTBOUND_CONTAINER.
    endfunction.</b>
    When i synchronize my mobile client it returns back
    <b>"EWAF                 001Could not execute method Z_ME_TEST_CONNECTION"</b>
    Can anybody help me in resolving this?

    Hi Sivakumar, I have write the my FM in the BWAFMAPP and the RFC destination in MEMAPPDEST but i have tha same error.
    This is my simple method in my application:
    <b>public String testSync(String userName) {
              String errormessage = null;
              try {
    //        get user out of the SyncSettings
                String user = Configuration.getInstance().getProperty(PropertyKeys.SYNCSETTINGS_USER, userName);
                OutboundContainerFactory outfactory = OutboundContainerFactory.getInstance();
                if (outfactory == null) {
                   errormessage = "testSync->OutboundContainerFactory.getInstance failed";
                }  else {
                   OutboundContainer out = outfactory.createOutboundContainer(
                   VisibilityType.SEPARATED,
                   R3_METHOD_TEST_SYNC,
                   OutboundContainer.TYPE_REQUEST);
              // add the name that has been typed into the JSP
                   out.addItem(DC_I_USER_NAME, user.toUpperCase());
                  out.addItem(DC_I_NUMBER_OF_LINES,"0");
                   out.close();
              // Start Sync
                 SyncManager.getInstance().synchronizeWithBackend(VisibilityType.SEPARATED);
              catch (SyncException ex) {
                   errormessage = ex.getMessage();
              catch (IllegalArgumentException ex) {
                      errormessage = ex.getMessage();
              catch (Exception ex) {
                        errormessage = ex.getMessage();
              finally {
            System.out.println("testSync: errormessage="+errormessage);
              return errormessage;
         }</b>
    You have anathor idea?
    Thanks

  • Why I am facing signal problem in my 4s after upgrade to os 5.0.1

    Why I am facing signal problem in my 4s after upgrade to os 5.0.1 and how can I solve it

    Hi, i also got the same problem. pls let me know if there any luck.
    01738855651
    Tusher
    Thanks Man

  • HT3910 I face problems with the Nvidia 8800 GS on my iMac 24'' 3.06Ghz intel core duo. OS 10.06.08. What can I do to solve the problem and if you recommend upgrade to mountain Lion

    I  face problems with the Nvidia 8800 GS on my iMac 24'' 3.06Ghz intel core duo. OS 10.06.08. What can I do to solve the problem and if you recommend upgrade to mountain Lion

    If you want to sync it to the iPad from that Mac, you need to upgrade it to at least 10.5.8.
    If you want to copy the music to another Mac, you don't. Move the iTunes folder of the item in the Finder's sidebar over as you would any other folder. If you put it somewhere other than the Music folder, launch iTunes with the Option key held down and point it to that location.
    (61713)

  • T410 - Keyboard problems after Windows 8.1 upgrade

    Hi to all!
    Recently i'm facing huge problems with the keyboard of my T410.
    The Laptop shuts down when I press "Alt Gr", if I press shutdown - the screen spins several times before shutting down, if I use the arrow-keys the screen also flips, the normal letter-keys won't work at all. Every pressed Button makes a little beepsound.
    The scrolling-funktion on the touchpad doesnt work either.
    Using an USB-Keyboard / Mouse, I have no problems at all.
    I have installed the latest drivers and bios-update.
    This problem is there after I upgraded windows 8 to windows 8.1. All windows-updates have been made.
    Do you have any tips to use my Laptop as a laptop again? At the moment I have a small desktop PC as the laptop won't work without usb-keyboard and muse.
    I looking forward to your replies. Best regards

    I don't no what in-place means but I installed the Upgrade to 8.1 via the Windosw Store on a running Windows8 system.
    I just re-ran System Update in the latest version, checked windows updates, checked the drivers via the lenovo support page manually, latest bios...but still doesnt work.
    In the Windows 8.1 Tested System List from the lenovo homepage which I just found is the T410 not listed. So I assume it could be a compatibility problem.
    Back to Win8?

  • The problem related to wireless service Wi-Fi connectivity Never work properly

    Hi
    i am bashair from KSA
    I have iPhone 5, you update your iPhone to version 6.1.3
    The problem related to wireless service Wi-Fi connectivity
    Never work properly, you try Method posed but did not succeed..
    i need help me please
    thanks..

    UPDATE
    Hey this is totally weird. I haven't done jailbreak at all and I won't But how is possible that default apps such as Safari and Appstore have the problem I've mentioned before and Skyfire works perfectly without any trouble.
    So to sum up:
    Safari: loading stucks after few seconds on wi-fi, mostly doesn't load pictures
    Appstore: loading stucks after few seconds on wifi and it keeps saying "loading"
    Facebook and Youtube: doesn't load pictures
    SKYFIRE: loads everything without any trouble
    and completely everything works on Edge...
    So tell me W.T.F. :-D

  • Codepage problems with PlainHTTP Adapter since upgrade to PI 7.0

    Hello everybody,
    I have problems some codepage problems (UTF-8) since the upgrade to PI 7.0. The PlainHTTP Adapter doesn't sends a valid UTF-8 XML to a 3rd party system anymore. Before the upgarde, the scenario works and I didn't touched it.
    I found a workaround, by using the SOAP-Adapter (without SOAP Envelope) instead of the PlainHTTP. This works fine.
    The scneario is pretty simple. A R3 (4.6c) sends an IDoc to the XI. The XI sends the IDoc-XML via HTTP to a 3rd party system. The message itself isn't touched.
    Does anybody now this problem? I don't want to involve the AdapterEngine, so I want to get rid of the SOAP Adapter
    Thanks a lot,
    Thomas

    Yes, I use 'UTF-8' in the XML-Code.
    I also tried the ISO-8859-1, this also doesn't works
    Regards,
    Thomas

Maybe you are looking for