Problems rendering from CS6 using H.264

I'm trying to render out an H.264 from CS6, but getting really glitchy grey pixelated results. So far what I've diagnosed is that if I render from CS6 using format H.264 I get the issue, but if I render out as format Quicktime using the H.264 codec the movie is fine. I tried rendering out in CS5.5 and in both cases there are no problems, which makes me think it's something to do with the way that CS6 handles the H.264 format.
Here is the version from AE CS6:
..and here the same file rendered from AE CS5.5
One other thing to note is that the problem doesn't seem to show up when viewed in Quicktime 7.
I'm on a 12 core MacPro running OSX 10.6.8 and have AE CS6 11.0.1.12
Any help would be appreciated.

I was rendering Quicktime loseless .mov files for converting to .mp4 for web use and I came across this issue. My quicktime mov's were accurate but my converted files were looking grey and a bit washed out. After endless attempts at converting in Adobe Media Encoder, I found this piece of info. It has eveything to do with your video card settings. In my case, I am on a PC with an NVIDIA video card. Here is what I did.
NVIDIA Control Panel > Adjust video color settings > Set 'With NVIDIA Settings', go to Advanced tab and set the dynamic range to Full (0-255)
and a screenshot for your convenience.
Boom, problem solved. Is this going to help users with the same setting issue, arg nope. But I'm assured that it's a problem I cannot control.
Cheers

Similar Messages

  • Have problem to enable CS6 using Adobe ID or the serial.

    Hello,
    we have problem to enable CS6 using Adobe ID or the serial .
    Follow the error information :
    We passed all these tests .
    https://helpx.adobe.com/br/download-install.html
    a) What applications are you trying to install ?
    CS6 Master Collection
    b) What operating system are you using ?
    Windows 7 Professional Service Pack 1 64-bit .
    c) The application was previously installed on the computer?
    do not
    d) What error messages are you getting?
    Connect to the Internet and try again
    The computer is offine or his clock is set incorrectly , which caused an error. An Internet connection is required.
    Connect to the internet or set the clock and try again. If the problem persists , contact Customer Support with Clinte .
    If we choose the option " No Internet connection "the next screen gives the message " Your computer is connected to the Intenet . I do not know what the problem is "

    Sign in, activation, or connection errors | CS5.5 and later

  • Problem printing from cs6 photoshop to epson stylus pro 4800 printer

    Has anyone had trouble printing from cs6 on a mac running lion to a epson stylus pro 4800 printer?   I keep getting an error message saying  "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.""   The computer sees the printer just fine and has the latest driver installed. I have removed it and reinstalled it many times . I need help with this.

    Yes, the menu items are not unavailable. We were already aware of the "Reveal Arrow" issue under OSX v10.5.3. The most important print menu items such as "Print Settings" and "Color Management" are simply not present. As previously stated we've already tried uninstalling and reinstalling the latest (v3.66) "Universal" print driver on both hosts and all of our client Macs. A resolution to this problem is very urgent as our semester begins this week and currently students can not print their next week assignments.

  • Rendering from FCE using full CPU.

    When I'm rendering a video off with Final Cut Express.... my CPU generally runs at 35%.... is there a way to get it to run at 100%, thus rendering faster.... or might my issue be an I/O problem with the drive to which I am rendering/reading from? Any way to find this out?

    There could be all sorts of reasons for this.
    How much RAM is in your Macbook? FCE will run in 1GB but really needs 2GB to run best.
    What is this size of your system HD and how much free space is left on it? You probably have a 5400rpm drive to begin with, which is a little slow for video work. But a full drive will also slow down your system. Rule of thumb is keep at least 15-20% free space at all times.
    There is no easy way for a user to force allocate cpu resource to an individual program.

  • Problem exporting from FCP using compressor

    Out of the blue - I'm getting batch failures trying to export from FCP for use in a DVD. Immediately after selecting compressor for export, I get an error reading "That file already exists", and a new tab appears in the media browser with a lengthy character string. Compressor opens fine, and I select Best Quality 4:3 encoding for video and aiff48 for audio. When the batch is submitted - it promptly fails and blames FCP for generating an error.
    Did all kinds of restarts and work arounds to no avail. The promising news is that this error seems to occur only when exporting from FCP through Compressor.
    My work-around is to export a QT movie of the piece, quit FCP, launch Compressor, and then import the QT for batching.
    Hope this helps anyone else in similar situations
    Martin
    G5 PPC   Mac OS X (10.4.8)   FCP 512 post production

    Hi:
    How long is your movie?
    The best workflow is FCP > Compressor > DVDSP.
    You can encode your timeline directly to get MPEG2 video and Dolby 2 (AC3) audio files. Then import those in DVDSP and author your DVD.
    Using Compressor you control the full encoding process. You can test with small parts of your movie (those where you got problems with iDVD) and find the best encoding options fopr your footage.
    Of course the DVDSP learning curve is longer than iDVD but once you learned ir you probably never go back. Like iMovie and FCP.
    To give you detailed info about what encoding settings to use you must post some info about your FCP project.
    Hope that helps !
      Alberto

  • I'm having problems installing Photoshop Cs6 using the Akamai download manager.Is anyone else having an issue?

    Anyone also having problems?

    use a different browser or download directly,
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5.5 (win), 5.5 (mac) | 5.4 (win), 5.4 (mac) | 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Problems printing from safari using an HP photosmart 7960 printer

    for some reason my printer will now only print from word or other applications but when i try and print a web page from safari my safari crashes. help anyone!

    Dh11unit-
    If there is a print job stuck in the print queue, double-click the iPad's Home button.  A row of recent Apps will line up along the bottom of the screen.  Scroll across and look for the Print Center icon.  If you find it, you should be able to delete the bad print job.
    If the Print Center is not there, your print job probably did not proceed far enough.  It is possible your WiFi router does not correctly handle Bonjour data required by AirPrint.  If that is the case, you would need to contact your router's manufacturer to see if there is a change to its setup or a firmware update that will fix the problem.
    I suggest you download the free HP App, ePrint Home & Biz.  It has limitations, but should get you printing.
    Fred

  • Problems printing from Aperture using Epson R340

    I have an Epson R340 and happily use all the paper settings such as Glossy print from Photoshop to the printer. Having now installed Aperture I find I am not able to do this. I have reloaded the Epson drivers but still not able to do this. To elaborate when I press Print image from Aperture I go into Print settings - and find that the following items have a line through them - Print Settings, Colormanagement, Printoption and Extenstionsetting. This is not the case when I look at the menu via Photoshop. Can anyone help me on this.

    I have an Epson R320 and all the Epson's printer driver options are available to me in Aperture. My list is slightly different: Print Settings, Color Management, Page Layout Settings, and Extension Settings with the words separated by spaces and each has a capitalized first letter.
    I'm wondering if Aperture isn't seeing your Epson driver files. You might want to remove the Aperture plist file from your User>Library>Preferences folder and relaunch Aperture.

  • Problem with Photoshop CS6. If I open a file using Camera RAW

    I have a new problem with Photoshop CS6.  If I open a file using Camera RAW, and process it as usual, CS6 doesn't want to save it the way it used to.  I don't know if I changed something by accident or not. 
    Here's what happens now: After opening from ACR to CS6 and completinhg all of my work, I choose "Save as..."  The save as window opens showing the file name and format.  The default format seems to be .PSD.  I use the drop down to select .jpg.  The file saves normally as a .jpg.  When I go to close the image from, I get a new prompt asking, "Save changes to Adobe Photoshop document DSC_xxxx.NEF before closing?
    I looked up at the file name in the bar above the work space and noticed that it does NOT change from "DSC_xxxx.NEF" to "DSC_xxxx.jpg" after I have saved the file as a .jpg,in my webesite  but it always used to do that.  This adds a few extra steps when closing a document and it really slows me down.
    In fact, I wouldn't swear to this, but I think it used to save to .jpg by default, without me specifying this.
    I don't see a setting in the preferences for what to use as the default file format for saving, so I don't know where to change it back.
    Any ideas?
    Thanks in advance

    You are in the wrong forum;  You actually need Photoshop forum at this link:
    <http://forums.adobe.com/community/photoshop?view=discussions>
    Hope you can repost your question at the correct link.

  • Problems playing .f4v files in CS5.5 that were rendered from CS5.5?

    Premiere Pro CS5.5 seems to have trouble playing .f4v files that it has rendered? I basically edit my video, (uncompressed .mov) export it as a .f4v file for YouTube which is about half an hour in length. I then get that half an hour video and do a video preview of what happened over the half hour… like a montage. I used to export my videos to .mp4 and I never had any problems when trying to do my montage edits, but now that I am using .f4v CS5.5 freezes the video but the audio keeps playing, the video won't play at all or it freezes during transitions (and the transitions are rendered before I try to playback my clips) The bottom line is that the .f4v format has never played back perfectly once and I could understand this if I had got the file from somewhere else but I rendered it from CS5.5? Can anybody help me with this please.
    Thank you
    Bird

    Hi Jim, thanks for your reply What you have suggested, is what I think I will do. I think I'll create a new sequence from my exisiting sequence and do my montage edits that way instead of using .f4v or .mp4. Do you know why I was able to edit my montages from .mp4 with no problem but not from .f4v file format which was rendered from CS5.5? I just wondered why as this seems odd to me.
    Thank you in advance.

  • Hi, Just switched from CS6 to PS CC. I am used to using ACR in CS6 with it's preview checkbox in the upper  right-hand corner. I do not see that checkbox in PS CC. I see that they have added side-by-side, right and left and top and bottom before and after

    Hi,
    Just switched from CS6 to PS CC. I am very comfortable using ACR in previous versions. I liked to use the preview checkbox located in the upper right-hand corner to see before and afters. That checkbox is no longer in my version of PS CC. I see that they have side-by-side, top and bottom and right and left before and after options in the lower right-hand corner in this version. Is there anyway to get that legacy preview checkbox back so that I can use it?

    Hi Warunicorn,
    Thank you very much. I just could not find it on my own. I will have more questions as I get into it.
    Jim

  • Problems printing from Google Chrome browser using my HP Officejet 6500 E709n Series printer

    Dear Sir or Madam:
    I am using Microsoft Windows XP Home Edition Version 2002 Service Pack 3 desktop computer.
    I have a HP Officejet 6500 E709n Series printer.
    I am encountering some problems printing from my Google Chrome browser in my Outlook.com account because when I try to change some settings in the print dialog interface the printout comes out incorrectly.
    Below are the 2 snapshots of the print dialog interface of Google Chrome browser before printing an email message from my Outlook.com account.
    Are there any software updates to correct this problem?
    Please reply back soon.
    Thanks.
    Sincerely,
    Etow

    Welcome to the forums Etow,
    I saw your post about the issue you are having with printing from Google Chrome. Have you tried disabling your pop up blocker to see if that will help? Also see this guide about Printing with Chrome.
    If the above does not help, try using Firefox or Internet Explorer to print.
    Have a great Friday
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HT4356 I checked everything out and had no problem printing from IPAD/MINI using the HP Photosmart 6520 printer, but the next day, using same application, my HP did not show, but was looking for the AirPrint Printer, what am I doing wrong?

    Using IPAD2, IPAD MINi, HP photosmartE6520 set up on wireless network.  No problem printing from my devices, but the following day, it is looking for AirPrint printer, why? 

    Hello lenc48,
    Welcome to the HP Forums.
    I see that you are having a few issues when it comes to printing from your mac as well as some two sided printing issues.
    I do have a some suggestions that we can try in the attempt to troubleshoot this issue.
    First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    Please remove the usb cable (if using wireless, disregard this step) from the printer and from the Mac and leave it disconnected until further notice.
    Please click on the first link that will give you instructions on Uninstalling the Printer Software.
    Once the software has been removed, please disable any anti virus protection that you may have on the Mac. 
    The next step we are going to take is downloading the HP Photosmart 6520 e-All-in-One Printer Full Feature Software and Drivers - OS X 10.9 Mavericks.
    The installation will prompt you when to connect the usb cable (You will see a prompt for a wireless connection as well if that is the connection type you would like to use) so please do not connect the cable until prompted to do so.
    If you are still having issues, feel free to write me back or you can contact HP Total care direct.  If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time.
    Cheers, 
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Problem with uploading data from excel using BDC for tcode f-02

    Hi All,
    I am uploading data from excel using BDC for tcode f-02. The problem here is, while recording, the values of some fields are recording twice. I dont know why it's happening so. But if I run my abap program, I have to give those fields twice in my excel sheet. Otherwise data does not upload. But it is not the feasible way. We must give those fields once in excel. Please tell me, how I can solve the issue.
    With regards,
    Rosaline.

    Hi,
      in BDC each and every action is recording. If your press enter in same screen that also recorded once aging may be this is your case repeating field values will appear. we can solve the problem for repeat fields like below.
    suppose in your excel having repeated field X1 X2 X3 the X2 contains repeated field X3 means delete the X3 field.
    Now In your itab having X1 and X2 fields. While in the LOOP the ITAB pass the X2 field to repeated the fields.
    LOOP at ITAB to WA.
    CLEAR bdcdata_wa.
    bdcdata_wa-fnam = 'BDC_CURSOR'.
    bdcdata_wa-fval = 'RM08M-EBELN'.
    APPEND bdcdata_wa TO bdcdata_tab.
    CLEAR bdcdata_wa.
    bdcdata_wa-fnam = 'INVFO-BLDAT'.
    bdcdata_wa-fval = wa-X2." 1st time pass the X2 fields
    APPEND bdcdata_wa TO bdcdata_tab.
    CLEAR bdcdata_wa.
    bdcdata_wa-fnam = 'INVFO-BLDAT'.
    bdcdata_wa-fval = wa-X2." pass the same value to repeated field
    APPEND bdcdata_wa TO bdcdata_tab.
    Endloop.
    Hope you can understand.
    Regards,
    Dhina..

  • Transferring saved workspaces, brushes, scripts, etc. from CS6 to CC on a PC using Windows 7

    This is what I came up with...
    Transfer saved workspaces, brushes, scripts, etc. from CS6 (Indesign, Illustrator and Photoshop) to CC on a PC using Windows 7.
    Go to start menu < computer < (OS) C: drive < documents and settings* < user (your user name) < application data** < adobe < adobe illustrator (or adobe photoshop)***
    *To see the ‘documents and settings’ folder, I had to go to start menu < control panel < folder options –  select view tab – uncheck hide protected operating system files (recommended). The computer will prompt you to go ahead, say ‘yes’ then hit apply.
    ** There is another folder above ‘application data’ named ‘appdata’, this is not the correct folder.
    * & ** I could not access these folders no matter what user settings I selected or logged in as administrator. I did an internet search and found the following successful:
    If the the folder denies you access to share… right click on the folder < select properties < select the ‘security’ tab < click the ‘edit’ button < select any and all users named ‘everyone’ < select ‘remove’
    After I removed the ‘everyone’ users, I was able to successfully share the folder to my user and access.
    *** I did not have an ‘adobe indesign’ folder, scrolling down the list it was labeled just as ‘indesign’. So was ‘bridge’, ‘dreamweaver’, etc.
    INDESIGN: Below are my exact paths for my particular system:
    < adobe < Indesign (inside this folder I have three folders: Version 7.0, Version 8.0 and Version 9.0 – which correlates? to CS5, CS6 and CC.) < Version 8.0 < en_US < Workspaces (inside this folder I have two files of each workspace – for example named: ‘xyz.xml’ and ‘xyz_CurrentWorkspace.xml’, I don’t why there are two similarly named files??, so I copied both and pasted both (and it worked.)
    < copy the workspaces you want to bring into CC
    >Go back, to the Indesign folder and then to < Version 9.0 < en_US < Workspaces and paste the workspaces.
    I did the same for scripts: copied from the Version 8.0 folder to the Version 9.0 folder *Please note that, with updated versions, your scripts may not work…
    < Version 8.0 < en_US < scripts < scripts panel (copy scripts.)
    You can do the same for Greps, Glyphs, Find/Change, etc.
    I copied entire folders over from the en_US folders: ‘Indesign Shortcut Sets’ and ‘Glyph sets’
    PHOTOSHOP: Below are my exact paths for my particular system: * please note I also have a ‘photoshop’ folder in the ‘adobe’ folder, which did not have what I was looking for to carry over.
    < adobe < adobe photoshop CS6 < adobe photoshop CS6 settings – copy all files < go back to adobe < adobe photoshop CC < adobe photoshop CC settings – paste all files

    To turn off UAC, go to the Control Panel, then User Accounts.
    Under the header, "Make changes to your user account", there is an entry titled "Change User Account Control Settings".
    Pick it, and drag the slider all the way down to "Never Notify".
    Access of Japan is the company Palm hired to write Palm Desktop 6.2.2.  
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Maybe you are looking for