Problems rendering HD clips with MP2, and Quicktime with DVC50 compression.

I am using After Effects CS3 on Mac 10.5.8
Ok, so we got this fancy new Grass Vally clip player that takes a very small number of formats. I am trying to render HD clips that are between 10 and 14 seconds long with audio embedded.
One of the formats suggested is MP2. When I try rendering an MP2 file the file extension comes out as .m2v
Also, the audio file is rendered as a separate .wav file. The video looks fine and is of a very small file size, but I can't play it back with Quicktime Pro. I'm not sure if the clip player will play an m2v file but I know that the audio has to be embedded in the same clip. I've looked through all of the audio settings and I can't figure out what I am doing wrong.
One of the other formats it will take is Quicktime with DVCPRO50 codec. I was able to render out some HD (1920 x 1080) files but the resolution looks like it is only about half what it should be. I've been through all of the settings that I can think of and can't see what is causing it.
I am pretty much at the end of my rope. I even called Grass Valley support and told them my problems. I just assumed that most of their customers would be creating animations with After Effects. The tech support guy wasn't even familiar with After Effects so I come to you guys for support.
Thanks,
Chris

Thanks, I will try the MPEG Streamclip.
I don't mean to imply that the tech support guy hadn't heard of After Effects but he had no real experience with it. I'm certain that this isn't the first time an After Effects user has called Grass Valley with this issue. I think their standard issue answer is "It's not our problem, call Adobe." I've worked at four different television stations and at each one we have used AE to render movies to our clip player. I have no doubt that it's the industry standard for this kind of work so it kind of baffles me that Grass Valley has no idea how to make it work with their product.
When the Grass Valley installer came the first question I asked him was "What kind of file formats does it take?" He said he didn't know and to just start trying different things to see if they work. I pretty much told him that I didn't have time for trial and error and that it should be on page one of the manual. We eventually found the spec sheet buried somewhere in the appendix. When I called GV tech support he just rerferred me back to that sheet. Basically he's getting paid to read the manual to me but doesn't have any idea about how it actually applies to their product.

Similar Messages

Canon 860 Series (Pixma) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips

After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
Problem:
- New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions.
- When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi.
- The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install).
Solution:
1) Install Canon Printer Drivers and Software (from official Canon site)
Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
Canon 860 Series Drivers & Software for OSX 10.8 Mountain Lion:
The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
1 Printer Driver
(Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
2 Scanner Driver
(Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
3 Network Tool
(Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
Canon Software for using advanced printing and scanning functions (while connected to network)
4 Solution Menu
(Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
5 MP Navigator EX
(Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
6 Easy-PhotoPrint EX
(Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
Canon Support (HK) – check your local site
http://www.canon.com.hk/en/download/main/index.do
Select Product and drivers from support site eg http://support-hk.canon-asia.com/
1. Choose a product category
Multifunctional Printers
2. Choose a product series
Pixma
3. Choose a product model
Pixma MX868
4. Choose type of document
Downloads or FAQ
If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
2) Check Canon Printer and Software Working while connected via USB
Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB. Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’). This is normally done as part of the automatic install but worth double checking
3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list). The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List. It should say WLAN Active, identify the SSID and have an IP address
If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try again

Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

Why is it that when I am trying to install an adobe product, I get 33% of the way through and then it gives me an error "unable to load metafile"?? It happened with Reader and now with Flashplayer. With the Reader, I was able to find a different install

Why is it that when I am trying to install an adobe product, I get 33% of the way through and then it gives me an error "unable to load metafile"?? It happened with Reader and now with Flash player. With the Reader, I was able to find a different installation link using the troubleshooting guide. I cannot find the same with flash player. Please tell me how to install Flash player because there is a website that I cannot even view without it. BTW That is annoying that I cannot even see the website without flash player
my system is XP

Use these installers:
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)
Flash Player for Mac OS X
For Adobe Reader go to http://get.adobe.com/reader/enterprise/

I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either.

I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either. I have an iphone 4 that will not connect to 5ghz.
thank you!

Your AirPort Express is already providing two separate 2.4 GHz and 5 GHz bands, but each band is using the same wireless network name.
This is the default setup for the AirPort Express, which is recommended for most users. The theory here is that devices will automatically connect to the best quality signal based on their capabilities and distance in relation to the AirPort Express.
It is possible to assign a different name to the 5 GHz band, and then "point" devices at that network to connect. Some users swear by this option.....(I am not one of them).... but you might want to give it a try to see how it works for you.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Express
Click Edit in the smaller window that appears
Click the Wireless tab at the top of the next window
Click Wireless Options near the bottom of the next window
Enter a check mark next to 5 GHz Name.....which will automatically add "5 GHz" to the network name....so you can identify it
Click Save, then click Update and wait a full minute for the Express to restart
Now you will need to "point" your 5 GHz capable devices at the 5 GHz network name. 2.4 GHz devices will connect to your "other" network name.

How to create a transport request with query and only with its structure.

HI guru,
how to create a transport request with query and only with its structure.transport request should not include any other query items like ( variables, conditions...etc)
thanks in advance.
venkata

Hi,
Goto RSA1 and then Transport Connection -> In SAP Transports select Object Types-> Query Elements -> Then select Query->Give Technical name of the query and then select for transfer. In the right side you can choose the components which you wanted to transport.
Regards,
anil

Matrix with CFL and RecordSet with DoQuery

Hello Experts,
How to use Matrix with CFL and RecordSet with DoQuery

Hi Manish,
Refer to SDK sample on CFL at ...\SAP\SAP Business One SDK\Samples\COM UI\VB.NET\17.ChooseFromList
Go to SDK Help, Developer's Guide -> DI DPI -> Reference -> Overview -> Objects -> Recordset
see the Example "Recordset Operations sample" at the bottom of the page
HTH
Aravind

Why is my airportxpr only working with Itunes and not with another music program

why is my airportxpr only working with Itunes and not with another music program??
I can not select/see other outputs in my sound selector.

You have not indicated which OS or which music program you have so I have listed a program called Airfoil to try for both Windows and Mac - it may work for you
for Windows - http://rogueamoeba.com/airfoil/windows/
for Mac - http://rogueamoeba.com/airfoil/mac/

Does Apple make/sell the new "Apple In-Ear Headphones with Remote and Mic" with a one sided configuration? So that a person that is deaf in one can hear both sides of a stereo recording? Also, since the "other" bud is not necessary/useful...it's removed.

Does Apple make/sell the new "Apple In-Ear Headphones with Remote and Mic" with a one sided configuration? So that a person that is deaf in one can hear both sides of a stereo recording? Also, since the "other" bud is not necessary/useful...it's removed.

As far as I know, Apple sells no such configuration. However, under Settings > General > Accessability, there is an option to play back audio in monoural mode, which would then play both halves of a stereo mix in each earbud.
Hope that helps.

How do I delete sites created with iWeb and posted with .mac after a format

I am confused about how to delete a couple of sites that I created with iWeb and posted with my .mac after I did a format reload?
I have tried everything. The original files are not on my MacBook Pro because of the format.
I also see them in my idisc, but I is my understanding that on my MacBook Pro that I can delete the files, but they are hosted online. On the online idisk I cannot delete them because there is no option. Please help!!!

Using the file menu in Finder:
Go/iDisk/My iDisk/Web/Sites/iWeb/YourSitesAreHere
Highlight selected files and Command/Delete. You will receive a drop down asking you if you are sure; click OK and the files/sites will be deleted immediately from the iDisk.
Mark

If I get the iphone 5 with plan and contract with 2 years or 3 can i pay $25 each mouth for just ulimited texting and 250 min of talking.

If I get the iphone 5 with plan and contract with 2 years or 3 can i pay $25 each mouth for just ulimited texting and 250 min of talking.

Ask the carrier instead of making yourself look like a fool by posting such a question in a user to user technical support forum.

I have a macbook pro with mountain lion and now so I can not synchronize my outlook calendar office 2011 for mac with ical and, therefore, with icloude. Can anyone help?

I have a macbook pro with mountain lion and now so I can not synchronize my outlook calendar office 2011 for mac with ical and, therefore, with icloude. Can anyone help?

http://support.apple.com/kb/HT5922
If you want to mirror your desktop, see:
http://support.apple.com/kb/HT5404
Regards.

Transfer video problems with FCE and Quicktime 7.6?

Are there any problems tranferring video with the new Quicktime (7.6)? I stopped downloaded upgrades to Quicktime last year when I could only transfer 5 mins of video at a time with Quicktime 7.3 (or 7.1.3).
Apple makes these upgrades so now I can't use iTunes or new Pages without upgrading Quicktime. However, i've heard there are still problems with digital video transfers etc.

Just for your info: I bought FCE HD3 in 2006, I had Quicktime 7. But when Quicktime 7.1.3 came out a year or so later - that's when I had to go back to using QT 7. Which meant I had to spend several days rebooting the entire system back to what it was when I bought it.
That cost me a lot more than what the Xpress was worth.
But I really do appreciate your advice. It saves me doing the same again. My complaint is, why can't Apple answer these questions themselves? My dealer could not even get an answer.

Having problems with OSX and mail with the servers?

Having problems with OSX and the mail servers? Seems to be happening more and more?

Hello,
Who is your eMail provider, the part after the @ sign?
In Mail's Window Menu, choose Connection Doctor, any red dots for status, if so what is the message?
Then click the Show Details button & Check again.
Open Keychain Access in Utilities, use Keychain First Aid under the Keychain Menu item, then either check the Password under that item, change it, or delete it and start over.
You may have multiple entries.
Open Keychain Access in Utilities, enter the part after the @ sign in the search bar, hit enter
The Password rejection can confuse people since it's a catch all meaning...
This Password, Username, Authentication method... is not recognized on this Port to this Server, more than one entry in Keychain for each in/out entry, or a server end problem.
If using a browser to login via WebMail works it's not Name or Password, but one of the other ones.
The receiving email ports are:
IMAP is port 143
IMAP-SSL is port 993
POP is port 110
POP-SSL is port 995
Outgoing ports are...
SMTP and SMTP-SSL is on ports 25, 587 and 465. Port 587 has to be SSL, and port 465 is enforced TLS-wrapped and is generally used by Outlook users.

[FIXED] Compiz runs only with emerald and crashes with metacity

Hey,
I currently try to use a metacity theme and have compiz enabled but apparently that's something compiz doesn't really like.
One think i noticed in fusion-icon is that the entire metacity option under: "Select Window Devorator" is just not there.. (or was that always the case?)
Oke, things i have done so far:
- Search this forum (obviously) nothing found with a solution
- Searched the wiki (same results)
- in gconf-editor /desktop/gnome/session/required_components/windowmanager set to compiz (like said in the Compiz wiki page on archlinux.org
- disabled metacity as compositing manager (tried with enabled as well but the same results)
- right now i have the compiz bash script from ubuntu (tweaked a little) and that starts up compiz just fine but not with metacity
And incase you want the script:
#!/bin/sh
# Compiz Manager wrapper script
# Copyright (c) 2007 Kristian Lyngstøl <[email protected]>
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
# Contributions by: Treviño (3v1n0) <[email protected]>, Ubuntu Packages
# Much of this code is based on Beryl code, also licensed under the GPL.
# This script will detect what options we need to pass to compiz to get it
# started, and start a default plugin and possibly window decorator.
COMPIZ_BIN_PATH="/usr/bin/" # For window decorators and compiz
PLUGIN_PATH="/usr/lib/compiz/"
GLXINFO="/usr/bin/glxinfo"
KWIN="/usr/bin/kwin"
METACITY="/usr/bin/metacity"
XFWM="/usr/bin/xfwm"
COMPIZ_NAME="compiz" # Final name for compiz (compiz.real)
# For Xgl LD_PRELOAD
LIBGL_NVIDIA="/usr/lib/nvidia/libGL.so.1.2.xlibmesa"
LIBGL_FGLRX="/usr/lib/fglrx/libGL.so.1.2.xlibmesa"
# Minimum amount of memory (in kilo bytes) that nVidia cards need
# to be allowed to start
# Set to 262144 to require 256MB
NVIDIA_MEMORY="65536" # 64MB
NVIDIA_SETTINGS="nvidia-settings" # Assume it's in the path by default
# For detecting what driver is in use, the + is for one or more /'s
XORG_DRIVER_PATH="/usr/lib/xorg/modules/drivers/+"
FALLBACKWM="xterm"
if [ x"$KDE_FULL_SESSION" = x"true" ]; then
FALLBACKWM="${KWIN}";
elif [ x"$GNOME_DESKTOP_SESSION_ID" != x"" ]; then
FALLBACKWM="${METACITY}"
elif xprop -root _DT_SAVE_MODE | grep ' = \"xfce4\"$' >/dev/null 2>&1; then
FALLBACKWM="${XFWM}"
fi
FALLBACKWM_OPTIONS="--replace $@"
# Driver whitelist
WHITELIST="nvidia intel ati radeon i810 fglrx"
# blacklist based on the pci ids
# See http://wiki.compiz-fusion.org/Hardware/Blacklist for details
#T=" 1002:5954 1002:5854 1002:5955" # ati rs480
#T="$T 1002:4153" # ATI Rv350
#T="$T 8086:2982 8086:2992 8086:29a2 8086:2a02 8086:2a12" # intel 965
T="$T 8086:2a02 " # Intel GM965
T="$T 8086:3577 8086:2562 " # Intel 830MG, 845G (LP: #259385)
BLACKLIST_PCIIDS="$T"
unset T
COMPIZ_OPTIONS="--ignore-desktop-hints --replace"
COMPIZ_PLUGINS="core"
ENV=""
# Use emerald by default if it exist
USE_EMERALD="yes"
# No indirect by default
INDIRECT="no"
# Default X.org log if xset q doesn't reveal it
XORG_DEFAULT_LOG="/var/log/Xorg.0.log"
# Set to yes to enable verbose
VERBOSE="yes"
# Echos the arguments if verbose
verbose()
if [ "x$VERBOSE" = "xyes" ]; then
printf "$*"
fi
# abort script and run fallback windowmanager
abort_with_fallback_wm()
if [ "x$SKIP_CHECKS" = "xyes" ]; then
verbose "SKIP_CHECKS is yes, so continuing despite problems.\n"
return 0;
fi
if [ "x$CM_DRY" = "xyes" ]; then
verbose "Dry run failed: Problems detected with 3D support.'n"
exit 1;
fi
verbose "aborting and using fallback: $FALLBACKWM \n"
if [ -x $FALLBACKWM ]; then
exec $FALLBACKWM $FALLBACKWM_OPTIONS
else
printf "no $FALLBACKWM found, exiting\n"
exit 1
fi
# Check if we run with the Software Rasterizer, this happens e.g.
# when a second screen session is opened via f-u-a on intel
check_software_rasterizer()
verbose "Checking for Software Rasterizer: "
if glxinfo 2> /dev/null | egrep -q '^OpenGL renderer string: Software Rasterizer' ; then
verbose "present. \n";
return 0;
else
verbose "Not present. \n"
return 1;
fi
# Check for non power of two texture support
check_npot_texture()
verbose "Checking for non power of two support: "
if glxinfo 2> /dev/null | egrep -q '(GL_ARB_texture_non_power_of_two|GL_NV_texture_rectangle|GL_EXT_texture_rectangle|GL_ARB_texture_rectangle)' ; then
verbose "present. \n";
return 0;
else
verbose "Not present. \n"
return 1;
fi
# Check for presence of FBConfig
check_fbconfig()
verbose "Checking for FBConfig: "
if [ "$INDIRECT" = "yes" ]; then
$GLXINFO -i | grep -q GLX.*fbconfig
FB=$?
else
$GLXINFO | grep -q GLX.*fbconfig
FB=$?
fi
if [ $FB = "0" ]; then
unset FB
verbose "present. \n"
return 0;
else
unset FB
verbose "not present. \n"
return 1;
fi
# Check for TFP
check_tfp()
verbose "Checking for texture_from_pixmap: "
if [ $($GLXINFO 2>/dev/null | grep -c GLX_EXT_texture_from_pixmap) -gt 2 ] ; then
verbose "present. \n"
return 0;
else
verbose "not present. \n"
if [ "$INDIRECT" = "yes" ]; then
unset LIBGL_ALWAYS_INDIRECT
INDIRECT="no"
return 1;
else
verbose "Trying again with indirect rendering:\n";
INDIRECT="yes"
export LIBGL_ALWAYS_INDIRECT=1
check_tfp;
return $?
fi
fi
# Check wether the composite extension is present
check_composite()
verbose "Checking for Composite extension: "
if xdpyinfo -queryExtensions | grep -q Composite ; then
verbose "present. \n";
return 0;
else
verbose "not present. \n";
return 1;
fi
# Detects if Xgl is running
check_xgl()
verbose "Checking for Xgl: "
if xvinfo | grep -q Xgl ; then
verbose "present. \n"
return 0;
else
verbose "not present. \n"
return 1;
fi
# Check if the nVidia card has enough video ram to make sense
check_nvidia_memory()
if [ ! -x "$NVIDIA_SETTINGS" ]; then
return 0
fi
MEM=$(${NVIDIA_SETTINGS} -q VideoRam | egrep Attribute\ \'VideoRam\'\ .*: | cut -d: -f3 | sed 's/[^0-9]//g')
if [ $MEM -lt $NVIDIA_MEMORY ]; then
verbose "Less than ${NVIDIA_MEMORY}kb of memory and nVidia";
return 1;
fi
return 0;
# Check for existence if NV-GLX
check_nvidia()
if [ ! -z $NVIDIA_INTERNAL_TEST ]; then
return $NVIDIA_INTERNAL_TEST;
fi
verbose "Checking for nVidia: "
if xdpyinfo | grep -q NV-GLX ; then
verbose "present. \n"
NVIDIA_INTERNAL_TEST=0
return 0;
else
verbose "not present. \n"
NVIDIA_INTERNAL_TEST=1
return 1;
fi
# Check if the max texture size is large enough compared to the resolution
check_texture_size()
# Check how many screens we've got and iterate over them
N=$(xdpyinfo | grep -i "number of screens" | sed 's/.*[^0-9]//g')
for i in $(seq 1 $N); do
verbose "Checking screen $i"
TEXTURE_LIMIT=$(glxinfo -l | grep GL_MAX_TEXTURE_SIZE | sed -n "$i s/^.*=[^0-9]//g p")
RESOLUTION=$(xdpyinfo | grep -i dimensions: | sed -n -e "$i s/^ *dimensions: *$[0-9]*x[0-9]*$ pixels.*/\1/ p")
VRES=$(echo $RESOLUTION | sed 's/.*x//')
HRES=$(echo $RESOLUTION | sed 's/x.*//')
verbose "Comparing resolution ($RESOLUTION) to maximum 3D texture size ($TEXTURE_LIMIT): ";
if [ $VRES -gt $TEXTURE_LIMIT ] || [ $HRES -gt $TEXTURE_LIMIT ]; then
verbose "Failed.\n"
return 1;
fi
verbose "Passed.\n"
done
return 0
# check driver whitelist
running_under_whitelisted_driver()
LOG=$(xset q|grep "Log file"|awk '{print $3}')
if [ "$LOG" = "" ]; then
verbose "xset q doesn't reveal the location of the log file. Using fallback $XORG_DEFAULT_LOG \n"
LOG=$XORG_DEFAULT_LOG;
fi
if [ -z "$LOG" ];then
verbose "AIEEEEH, no Log file found \n"
verbose "$(xset q) \n"
return 0
fi
for DRV in ${WHITELIST}; do
if egrep -q "Loading ${XORG_DRIVER_PATH}${DRV}_drv\.so" $LOG &&
! egrep -q "Unloading ${XORG_DRIVER_PATH}${DRV}_drv\.so" $LOG;
then
return 0
fi
done
verbose "No whitelisted driver found\n"
return 1
# check pciid blacklist
have_blacklisted_pciid()
OUTPUT=$(lspci -n)
for ID in ${BLACKLIST_PCIIDS}; do
if echo "$OUTPUT" | egrep -q "$ID"; then
verbose "Blacklisted PCIID '$ID' found \n"
return 0
fi
done
OUTPUT=$(lspci -vn | grep -i VGA)
verbose "Detected PCI ID for VGA: $OUTPUT\n"
return 1
build_env()
if check_nvidia; then
ENV="__GL_YIELD=NOTHING "
fi
if [ "$INDIRECT" = "yes" ]; then
ENV="$ENV LIBGL_ALWAYS_INDIRECT=1 "
fi
if check_xgl; then
if [ -f ${LIBGL_NVIDIA} ]; then
ENV="$ENV LD_PRELOAD=${LIBGL_NVIDIA}"
verbose "Enabling Xgl with nVidia drivers...\n"
fi
if [ -f ${LIBGL_FGLRX} ]; then
ENV="$ENV LD_PRELOAD=${LIBGL_FGLRX}"
verbose "Enabling Xgl with fglrx ATi drivers...\n"
fi
fi
ENV="$ENV FROM_WRAPPER=yes"
if [ -n "$ENV" ]; then
export $ENV
fi
build_args()
if [ "x$INDIRECT" = "xyes" ]; then
COMPIZ_OPTIONS="$COMPIZ_OPTIONS --indirect-rendering "
fi
if [ ! -z "$DESKTOP_AUTOSTART_ID" ]; then
COMPIZ_OPTIONS="$COMPIZ_OPTIONS --sm-client-id $DESKTOP_AUTOSTART_ID"
fi
if check_nvidia; then
if [ "x$INDIRECT" != "xyes" ]; then
COMPIZ_OPTIONS="$COMPIZ_OPTIONS --loose-binding"
fi
fi
# Execution begins here.
# Read configuration from XDG paths
if [ -z "$XDG_CONFIG_DIRS" ]; then
test -f /etc/xdg/compiz/compiz-manager && . /etc/xdg/compiz/compiz-manager
for f in /etc/xdg/compiz/compiz-manager.d/*; do
test -e $f && . $f
done
else
OLD_IFS=$IFS
IFS=:
for CONFIG_DIR in $XDG_CONFIG_DIRS
do
test -f $CONFIG_DIR/compiz/compiz-manager && . $CONFIG_DIR/compiz/compiz-manager
for f in $CONFIG_DIRS/compiz/compiz-manager.d/*; do
test -e $f && . $f
done
done
IFS=$OLD_IFS
unset OLD_IFS
fi
if [ -z "$XDG_CONFIG_HOME" ]; then
test -f $HOME/.config/compiz/compiz-manager && . $HOME/.config/compiz/compiz-manager
else
test -f $XDG_CONFIG_HOME/compiz/compiz-manager && . $XDG_CONFIG_HOME/compiz/compiz-manager
fi
# Don't use compiz when running the failsafe session
if [ "x$GNOME_DESKTOP_SESSION_ID" = "xFailsafe" ]; then
abort_with_fallback_wm
fi
if [ "x$LIBGL_ALWAYS_INDIRECT" = "x1" ]; then
INDIRECT="yes";
fi
# if we run under Xgl, we can skip some tests here
if ! check_xgl; then
# if vesa or vga are in use, do not even try glxinfo (LP#119341)
if ! running_under_whitelisted_driver || have_blacklisted_pciid; then
abort_with_fallback_wm
fi
# check if we have the required bits to run compiz and if not,
# fallback
if ! check_tfp || ! check_npot_texture || ! check_composite || ! check_texture_size; then
abort_with_fallback_wm
fi
# check if we run with software rasterizer and if so, bail out
if check_software_rasterizer; then
verbose "Software rasterizer detected, aborting"
abort_with_fallback_wm
fi
if check_nvidia && ! check_nvidia_memory; then
abort_with_fallback_wm
fi
if ! check_fbconfig; then
abort_with_fallback_wm
fi
fi
# load the ccp plugin if present and fallback to plain gconf if not
if [ -f ${PLUGIN_PATH}libccp.so ]; then
COMPIZ_PLUGINS="$COMPIZ_PLUGINS ccp"
elif [ -f ${PLUGIN_PATH}libgconf.so ]; then
COMPIZ_PLUGINS="$COMPIZ_PLUGINS glib gconf"
fi
# enable gnomecompat if we run under gnome
if [ x"$GNOME_DESKTOP_SESSION_ID" != x"" ] && [ ! -e ~/.compiz-gnomecompat ]; then
verbose "running under gnome seesion, checking for gnomecompat\n"
if ! gconftool -g /apps/compiz/general/allscreens/options/active_plugins|grep -q gnomecompat; then
verbose "adding missing gnomecompat\n"
V=$(gconftool -g /apps/compiz/general/allscreens/options/active_plugins|sed s/mousepoll,/mousepoll,gnomecompat,/)
if ! echo $V|grep -q gnomecompat; then
verbose "can not add gnomecompat, reseting\n"
gconftool --unset /apps/compiz/general/allscreens/options/active_plugins
else
gconftool -s /apps/compiz/general/allscreens/options/active_plugins --type list --list-type=string $V
fi
touch ~/.compiz-gnomecompat
fi
fi
# get environment
build_env
build_args
if [ "x$CM_DRY" = "xyes" ]; then
verbose "Dry run finished: everything should work with regards to Compiz and 3D.\n"
verbose "Execute: ${COMPIZ_BIN_PATH}${COMPIZ_NAME} $COMPIZ_OPTIONS "$@" $COMPIZ_PLUGINS \n"
exit 0;
fi
${COMPIZ_BIN_PATH}${COMPIZ_NAME} $COMPIZ_OPTIONS "$@" $COMPIZ_PLUGINS || exec $FALLBACKWM $FALLBACKWM_OPTIONS
That's it so far.
So again what i try to do is running compiz with metacity decorations.
I hope someone can help me here,
Mark.
Last edited by markg85 (2009-06-28 00:26:04)

whoops wrote:
Wait, what, I thought metacity isn't as window decorator, it is a window manager, right? I don't really get what you're trying to do... maybe install compiz-decorator-gtk and use it instead of emerald?
edit: aaah, yes, I think you're missing compiz-decorator-gtk, try that, look at fusion icon "window decorator" option again.
Strange.. i was under the impression that pacman -S compiz-fusion would install GTK and QT decorators... guess not.
This issue is fixed now. Running metacity decorations now WITH compiz.

Cannot clear document posted with FBS1 and Reversed with F.81 in F-03

We have recently turned on OIM for a Balance Sheet account and are in the process of clearing it. The postings in this account were generated with FBS1 (Accrual/Deferral Document) and reversed with F.81.
Majority of the documents displayed with FBL3N cleared no problem after open item management was turned on, however, there are a handful that are not displayed in F-03 (or F.13).
Please consider the following when answering:
OIM was turned on for the account using ZRFSEPA02 (Copy of the standard/not-delivered program for turning on OIM).
All of the entries were reversed with F.81 and the header of the documents does not contain a "Reversal Date".
I have already tried turning off OIM with ZRFSEPA03 and then turning it back on again with ZRFSEPA02.
My settings in FS00 are correct for the GL Account.
Hundreds of items were cleared. There are 7 documents that don't appear in F-03 or F.13
Also, please do not give me "Beginner level" information such as "Tick the OIM box for the GL Account in FS00" (You cannot turn on OIM in that manner for an account that has line items posted to it - I have been doing R/3 Configuration for 23 years, so I am an advanced Analyst in the FI/CO Area).
Thanks - Back to searching OSS!

Hi,
Actually when report is executed we get following message
Do not use the report program to set up open item management for the
account.
Create a new account with the correct account assignment. Post your
items to the new account. If you want to use the original account
number, you must bring the account balance to zero, change the account
assignment, and repost the items. You can remove the old items by
archiving the documents.
Hence, it is risky to execute this report.
Are you getting these documents in FB03 ?
Regards,
Tejas

Problems rendering HD clips with MP2, and Quicktime with DVC50 compression.

Similar Messages

Maybe you are looking for