Problems running 8.1.5.0.2 patch...

Hi there...
I4m trying to install those 81501 and 81502 patches for 8i and I4ve found this problem :
$ORACLE_HOME/precomp/demo/proc/demo_proc.mk
$ORACLE_HOME/precomp/public/bits/mathcalls.h
didn4t work because ?????
$ORACLE_HOME/precomp/demo/
$ORACLE_HOME/precomp/public/
just don4t exist !!!
How can it be possible not having the directories created ? Can anybody help ?
Thanks in advance...

Make sure that you have installed all components and options of Oracle, as the patch script assumes that.
As an example, though not related to your problem, see 2.2:
http://homepages.tig.com.au/~jmsalvo/linux/oracle8i.html

Similar Messages

UNIX: problem running an DEV & QA environment using form/report servlets

UNIX: problem running an DEV & QA environment using form/report servlets
I am trying to setup on one server an DEV and QA environment using the Forms Servlet, Forms Listener Servlet and Report Servlet.
I think I have the Forms Servlet and Forms Listener Servlet running properly. The problem is setting up the DEV and QA environment for running reports.
For example, when in DEV environment I would like to run a report from a directory specified in the REPORTS60_PATH. This doesn't seem possible.
It might be easier if I describe my configuration first:
DEV: run all forms and reports from the directory /data/release/dev
QA: run all forms and reports from the directory /data/release/qa
---DEV & QA Settings Forms Listener Servlet:
zone.properties:
# DEV
servlet.fl60dev.code=oracle.forms.servlet.ListenerServlet
servlet.fl60dev.initArgs=EnvFile=/u01/app/oracle/product/ias/6iserver/forms60/server/dev.env
# QA
servlet.fl60qa.code=oracle.forms.servlet.ListenerServlet
servlet.fl60qa.initArgs=EnvFile=/u01/app/oracle/product/ias/6iserver/forms60/server/qa.env
---DEV & QA Settings Forms Servlet:
servlet.f60servlet.code=oracle.forms.servlet.FormsServlet
--- Settings for Reports Servlet:
servlet.RWServlet.code=oracle.reports.rwcgi.RWServlet
Custom Env files since we are using Developer 6i Patch 7
dev.env and qa.env
Here I specify FORMS60_PATH and REPORTS60_PATH,
eg: DEV -> FORMS60_PATH=/data/release/dev
REPORTS60_PATH=/data/release/dev
likewise for QA ../qa
In the formsweb.cfg file i have something like:
[dev]
serverURL=/servlet/fl60dev
form=test.fmx
[qa]
serverURL=/servlet/fl60dev
form=test2.fmx
I have tested the following and they work without problems:
1. forms listener test page, eg: http://webserver:7777/servlet/fl60dev
2. running forms from the 2 environments
eg: http://webserver:7777/servlet/f60servlet?config=dev
this runs the form in the FORMS60_PATH (/data/release/dev)
Now my problems start with Reports.
When I run a report from forms (using run_report_object) it will not run any reports
as specified in the REPORTS60_PATH
Even using this url:
http://webserver:7777/servlet/RWServlet?server=rep60&report=test.rdf&destype=cache&desformat=html&
userid=scott/tiger@test9i
It NEVER seems to pickup and use the REPORTS60_PATH. I have tried nearly everything.
I have gone throught the instructions in "Integrating Oracle9iAS Reports in Oracle9iAS Forms -
White Paper"
(http://otn.oracle.com/products/forms/pdf/277282.pdf)
and Forms6i Patch 7: Oracle Forms Listner Servlet for Deployment of FOrms on the Internet
(http://otn.oracle.com/products/forms/pdf/p7listenerservlet.pdf)
plus any other documents in metalink relating to forms, or report servlets. I am
totally confused, please help.
I have tried setting the REPORTS60_PATH in the following files without success:
custom.env (as specified by initArgs=EnvFile in zone.properties)
jserv.properties
in the zone.properties I have tried to set a custom env file for the report servlet:
servlet.RWServlet.code=oracle.reports.rwcgi.RWServlet
servlet.RWServlet.initArgs=EnvFile=/u01/app/oracle/product/ias/6iserver/forms60/server/dev_rep.env
NO LUCK.
The only place that I can set the REPORTS60_PATH
is in "[6iserver home]/reports60_server" file when I start the reports server (did I even
get this right - I do have to have a reports server running don't I?)
Does this meaan I have to run multiple report servers for each of my environments?
Based on all the documentation I thought that REPORTS60_PATH as specified in the files relating
to the forms servlet would be the place to specify the path.
As you will understand I am getting really fustrated with this and it seems to
me that the reports servlet configuration in 6i is really half baked and since 9i
is coming out it will never be fixed.

I am even not able to run forms servlets from two different forms60_path, Is there any configuration do you make other than what you have mentioned in this post.
I already open a TAR in this regard, I am still waiting reply from ORACLE.
Thanks,
Shaik Ather Ahmed

Drastic problems running Forms using JavaPlugin

I'm facing some problems running my Forms application using JRE/JPI. My Forms version is 10g release 1 and JRE version is 1.4.2_13. I've upgraded my Application Server with patch to make it run smoothly with JRE. Patch ID is p4948949_9043_WINNT (patch 3). So my upgraded Forms version is 9.0.4.3.
Problems are as follows:
** There's a problem in Font, it's not appearing on application as configured. So I want to unistall the patch and restore my Forms version to previous version but I don't know how to uninstall this patch.
** Another issue which seems to be JRE related problem is I can't use mouse to select control on my Forms running application. I've to press TAB key to navigate through controls such as TEXT_ITEM. When I'm running application using JInitiator, this problem doesn't occur, I can click on any control of Forms , so I think it's JRE related problem.
Ours is a large scale application...this is why I'm in great problem now. Could someone help me resolve these issues?
Regards
Rashed

Sun has suggested that Oracle bug 5512094 will not be included into a production release until 1.5.0_13. For reasons unknown to us, the fix will not likely make it into _12. Since we are not responsible for their releases, this information may or may not be accurate. You will need to contact Sun for the latest details regarding their releases.
In the mean time, it is recommended you continue to use the special release you were provided by Oracle Support. However, also ensure that you have installed the latest one-off patches on the server which address several focus issues. Below is a list of the latest based on which version you may be using.
Forms 9.0.4.3 > Metalink Patch ID# 5750167 (New as of Jan 24, 2007)
Forms 10.1.2.0.2 > Metalink Patch ID# 5677148
Forms 10.1.2.2 > Metalink Patch ID# 5750193
As mentioned, both Oracle and Sun are investigating several other focus issues, so these patches may not correct your issue.
The best suggestion would be to create a reproducible test case and provide it to Support. This will help Oracle to better determine if your issue is one which we are already aware of or if yours is a new issue.

Problems running updater for Acrobat Pro

Since I upgraded to a Windows Vista computer 4 years ago I have had problems running Acrobat Pro Updater. This goes all the way back to v7. The installer always fails with error 1601 'Can't find network path.' I went through all of Adobe's troubleshooting docs. The only method that I found to a solution for the 1601 error that worked was to edit the registry by deleting all MS Office installer entries. Then running the updater. Then reinstalling the registry entries. Not a big deal one time but a pain in the *** over the last couple of years. And not terrifically elegant. After completely unstalling Acrobat Pro and installing new versions and CS Suites several times, the problem remains.
Surely there must be a better way to deal with these updates.

This has been a pattern since I started using a Vista workstation in 2007 with Acrobat 7 Pro and the original CS Suite. I'm now on Acrobat 9.x Pro and CS5. At one point I reverted from Office 2007 to Office 2003 thinking it might make a difference. It did not. So, it would appear that any version of Office and any version of Acrobat have this problem with some Vista installations. This workstation is running all current Vista service packs and patches.

Problem Running SSIS Package with a SQL Server Agent

SQL Server: SQL Server 2012
VS: Visual Studio 2012
Hello,
      I have been having a problem running SSIS packages by using a SQL Server Agent job. I first created these SSIS packages in a separate IS project in Visual Studio. I imported the packages to the Integration Services (Package
Store) instance on my SQL Server and tried to create a job that would run them from there.
      At first I read around about needing a proxy account to allow the agent/packages to access the file system since these packages are importing data from a flat file in the SQL database. So I created a temporary admin user to
use as the user for the agent. I did this by going to Services.msc on the server and linked the account the agent's "logon as". Then arose another issue where I am getting an error about using the incorrect type for my connection managers.
The connection manager "TestFile" is an incorrect type. The type required is "OLEDB". The type available to the component is "FLATFILE". Source: Data Flow Task Flat File Destination [2]     Description:
Cannot open the datafile "O:\*****\Success.txt"
I am not sure what this even means as I am getting this error even with a test package that doesn't do anything with the database. I have just two flat file connection managers in this test project one for grabbing the source file and one for
creating the new test file.
I am not sure what to do.
Thanks in advance,
Matt

I accidently created two posts. The newest one has the details.
I did not mean to.
SQL Server: SQL Server 2012
VS: Visual Studio 2012
Hello,
      I have been having a problem running SSIS packages by using a SQL Server Agent job. I first created these SSIS packages in a separate IS project in Visual Studio. I imported the packages to the Integration Services (Package
Store) instance on my SQL Server and tried to create a job that would run them from there.
      At first I read around about needing a proxy account to allow the agent/packages to access the file system since these packages are importing data from a flat file in the SQL database. So I created a temporary admin user to
use as the user for the agent. I did this by going to Services.msc on the server and linked the account the agent's "logon as". Then arose another issue where I am getting an error about using the incorrect type for my connection managers.
The connection manager "TestFile" is an incorrect type. The type required is "OLEDB". The type available to the component is "FLATFILE". Source: Data Flow Task Flat File Destination [2]     Description:
Cannot open the datafile "O:\*****\Success.txt"
I am not sure what this even means as I am getting this error even with a test package that doesn't do anything with the database. I have just two flat file connection managers in this test project one for grabbing the source file and one for
creating the new test file.
I am not sure what to do.
Thanks in advance,
Matt

Im trying to download itunes 10.5 but keep getting error message that says: There is a problem with this Windows Installer package. A problem run as part of the setup did not finish as expected. Contact your support personnel or package vendor.

im trying to download itunes 10.5 but keep getting error message that says: There is a problem with this Windows Installer package. A problem run as part of the setup did not finish as expected. Contact your support personnel or package vendor. I am using windows XP 32 bit, all the other computers in my house downloaded just fine, no problems, however this is the computer my iphone is set up to, ive tried doing a virus scan, windows update, downloading other things, updating everything possible, everything works fine, its just itunes that wont download, anyone have any other ideas?

Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that.

Problem running BI template installer after upgrade to 2004s

Hello,
After upgrading our Portal from EP6 to EP7 I have a problem running the BI template installer. The failure occures right at the beginning. The installer is looking for SLD related parameters in the 'CTC> Propertysheet SystemProperties'.
But there are only three parameters in the sheet :
HOST, SYSTEM_ID, INSTANCE_ID.
If you instal a new 2004s system you see much more entries in the 'Propertysheet SystemProperties'.
My question is how to add these missing entries into the 'Propertysheet SystemProperties'.
Thanks
Boaz

Hi Kaylan,
Actually there are only two things to manually fix after the CTC template run, which is mentioned in the Blog:
- check/correct the following settings in the NetWeaver Administrator for evaluate_assertion_ticket and ticket according SAP Note 945055
- the entry in table RSPOR_T_PORTAL for Platform and PDF fonts
If you uncertain, you can remove the created objects as stated in the Document http://scn.sap.com/docs/DOC-11607 => Page18 in the Notes Section. the CTC template is creating these objects and entries again.
Best Regards Roland

Having problem running an application

I have recently installed jdk 1.2.2 and i have no problem running applet but when i try to run an application i get the message 1 error can't find<filename> . java.
The path in autoexec.bat is fine. JRE File is include in my file jdk1.2.2.
I have installed and deinstalled it a couple of time and can't make it work.
Could someone help me please!!
Thanking you in advance!

doesn't sound like a path problem at all. you say when you try to RUN the app you get a message can't find filename.java. When you're running the app you run the binary class file i.e. java MainClass.class. If you're compiling the app you would do javac MainClass.java. Clarify your situation further if this does not help you out.

Problem running Lex in project created with Forte C++

I am having a problem running Lex in project using Forte C++ 6. I believe I may have an installation problem, but can't figure out where it is.
I created the project using Workshop. The make file generated is trying to run the following command: lex -o output/cmdscan.o cmsscan.l
Which causes the following error message lex: illegal option -- o
I checked the man pages and Lex doesn't have a -o option.
Is there another version of Lex installed by Forte C++ that is different than Lex from Solaris?
Ron

I created the project using Workshop. The make file generated is trying to run the following command: lex -o output/cmdscan.o cmsscan.l
Which causes the following error message lex: illegal option -- o
I checked the man pages and Lex doesn't have a -o option.
Yes, try in google.com
Wishes , a [url http://personallfiles.com/Grant.Scholarship.asp]federal grant and scholarship-in need for me

Trouble printing something out. Getting error message: There is a problem running Adobe Acrobat Reader. If it's running please exit and try again. 6:6

Getting message: There is a problem running adobe Acrobat Reader. If it's running, please exit and try again. 6:6

Hi garryw,
What version of Reader are you using, and are you on Mac OS or Windows? Do you get the same error when you try to print other PDF files, or is the problem specific to one PDF?
For starters, please try the solutions listed in this thread: Re: There is a problem with Adobe Acrobat /Reader. If it is running ,please exit and try again.(0:104)
Let us know how it goes.
Best,
Sara

Problems running Flash Builder 4.6 profiler

Hello,
I have a problem running Flash Builder profiler. When I click "Profile" it starts my web application, but nothing else happens inside Flash Builder itself - no new data appears in Profiler perspective, Flash Builder itself doesn't show any sign of doing something.
My mm.cfg contains the next line: "PreloadSwf=C:/flash builder workspace/.metadata/.plugins/com.adobe.flash.profiler/11/ProfilerAgent.swf?host=localhost &port=9999"
Additional details:
OS: Windows 7
Flash Builder version: 4.6
Tested web browsers: Firefox, IE 8 - the same problem in both of them
Flash player versions: ActiveX/Plug-in Version:11.7.700.169
I made sure that ProfilerAgent.swf indeed exists in the location defined in mm.cfg. In addition, I tried to change port 9999 to other ports (both in mm.cfg and in Flash Builder). I also verified that the location of ProfilerAgent.swf appears in trusted locations of Flash Player.
I would be very grateful if someone could help me to solve this problem.
Thanks,
Valeria

R Grieve wrote:
This sounds like something has gone wrong during installation. CSAR and CSLIBS references should be set up automatically during installation.
There should also be no need to import the Flex SDKs as CS Extension Builder 2.0 ships with them included. It won't do any harm though having the CS Flex SDKs imported.
Can you detail how you installed CS Extension Builder 2.0, please and where you obtained it from?
Here are the installation instructions I would recommend starting from a clean FlashBuilder 4.6 instance:
To install Adobe Creative Suite Extension Builder, download the ZIP file and unzip it into a root location (SDKRoot).
Install Extension Builder in Eclipse with Flash Builder or Flash Builder Standalone:
In Eclipse, choose Help > Install New Software.
In the Install dialog, click Add.
In the Add Site dialog, click Local... to browse to the SDK root folder or enter the URL of the update site.
Name the site CS SDK and click OK to confirm the changes.
Select the new CS SDK site in the "Work with" field.
-- Select all the Adobe Creative Suite Extension Builder components.
-- Click Next to confirm the selection.
In the Install Details review dialog, click Next to confirm that you want to install all the components listed.
Accept the terms of license agreements and click Finish.
Re-start Eclipse as recommended.
I obtained it from Adobe and installed it using the Help > Install software option, but without unzipping it. Maybe that was it.
Now I've done a clean installation and it works perfect. I did it with administrator permissions, don't know if it has anything to do with it, but I read it somewhere and did so just in case!
Thanks a lot!

Problem running car demo jwsdp-1.3,Tomcat 5.0

Hello. I am having problems running the car demo on the jwsdp-1.3 with Tomcat 5.0.
I get the following error message:
"A jar file containing the Servlet 2.3 and JSP1.2 classes is required to compile
carstore. Please define the property servlet.jar in your build.properties file and ensure
that the file exists."
I replaced the jsf EA 4 with the beta, and cleared out the cache in catalina as per the
installation documents. I am probably missing something here. I checked my path,
(I am using windows xp) and made sure the jsf directory was in the path.
Any help would be greatly appreciated. Thanks in advance.
regards,
cyuno

Thanks for your response.
I changed the path to the tomcat 5.0 that came with the jwsdp-1.3.
However, I am still getting the same error message. I have checked the build.properties file, the path, the path where ant is located, and the path is pointing to the jwsdp-1.3 directory.
I have been working with the examples in the java web services tutorial, and for the most part have not had any problems running the examples using the jwsdp-1.3, ant and tomcat 5.0(except for CH 11, on the jaxb examples)
Thanks again for your help
regards,
cy unpingco

Problems running Photoshop CS6 under OS 10.8 Mountain Lion

Since updating the OS from 10.6.7 to OS 10.8 on iMacs (21" and 24" Intel 2.4GHz) I have experienced problems running Photoshop. The app boots up fine and I can start a project as normal, but when I click on a tool to change it's usage I get the spinning beach ball, this lasts about 5 - 10 seconds and then the tool drop down menu appears. After this, I get the beach ball appearing every few minutes as I try to work, and the only way to get Photoshop running efficiently is to close it down and then restart.
Any ideas as to the cause? I've read on forums from both Adobe and Apple that apparently there are no compatibility issues between Mountain Lion and CS6 but I never had this problem previously under Snow Leopard.

The next two remedial steps would be to reset all tools by right-clicking here:
and if that does not resolve the problem, reset Preferences;
To reset Preferences:
If Photoshop is already open on your screen, close it (Quit). Then hold down Shift+Ctrl+Alt (Win) / Shift+Command+Option (Mac) on your keyboard and start Photoshop.
A dialog box will pop up asking if you want to delete the existing Preferences file (the "Settings"). Click Yes in the dialog box. The existing Preferences file will be scrapped and a new one will be created.

Problems running servlet due to missing classes?

Hi everyone,
I am doing a project which requires me to convert a java coding into a servlet. This java coding I am working on is some kind of location based service which tracks people (receiving an argument of a string as IP). It imports an external SDK called Ekahau SDK (some off the shelve product). Now I wish to convert it into a servlet so that the function that the java coding performs can be run from a webpage i created.
I have previously posted a thread on this forum called "Converting java coding into servlets?" when I had trouble compiling the servlet. Now that I could compile the servlet already, I still have problems running the servlet from my browser.
The webserver I am using is Apache Tomcat. Previously I was trying Apache HTTP server but since now I need to use servlet, I have shifted to Tomcat instead. I have been getting these "java.lang.NoClassDefFoundError:" when running the servlet from the browser. From the previous thread, I got suggestions from the replies saying that I need to put the jar files I need into my "C:\Tomcat\webapps\try\WEB-INF\lib" directory. I have been looking for the missing jar files from the internet and putting them into my "C:\Tomcat\webapps\try\WEB-INF\lib", but each time after adding a new jar file, I get another new "java.lang.NoClassDefFoundError:". Are the missing jar files really the problems? Cause it seems a bit weird to me that I need some many jar files which I dont even know why I need them for.
The HTTP status 500 error look like this:
description
The server encountered an internal error () that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: Servlet execution threw an exception
root cause
java.lang.NoClassDefFoundError: org/apache/excalibur/configuration/CascadingConfiguration
com.ekahau.G.N.A(Unknown Source)
com.ekahau.G.N.<init>(Unknown Source)
com.ekahau.sdk.imp.yax.D.<init>(Unknown Source)
com.ekahau.sdk.imp.yax.E.connect(Unknown Source)
com.ekahau.sdk.PositioningEngine.connect(Unknown Source)
coreservlets.testing.find(testing.java:75)
coreservlets.testing.doGet(testing.java:36)
javax.servlet.http.HttpServlet.service(HttpServlet.java:690)
javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
Here are the series of jar files I have been looking from the internet to add them into my "C:\Tomcat\webapps\try\WEB-INF\lib" directory:
1) org/apache/commons/collections/Closure
2) org/apache/log4j/Logger
3) org/apache/commons/lang/Validate
4) org/apache/excalibur/configuration/CascadingConfiguration
Please help~~ Thanks a lot.
My servlet coding is like this:
package coreservlets;
import java.io.*;
import java.util.*;
import java.io.IOException;
import java.io.PrintWriter;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import com.ekahau.sdk.*;
public class testing extends HttpServlet
     String ipAddress;
     int result;
     public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
              ipAddress = request.getParameter("deviceIP");
          try
               result = find();
          catch (IOException e)
               System.out.println("Error..." + e.toString());
          catch (EngineException e)
               System.out.println("Error..." + e.toString());
          response.setContentType("text/html");
              PrintWriter write = response.getWriter();
          write.println("<HTML>\n" +
"<HEAD><TITLE>Tryget</TITLE></HEAD>\n" +
"<BODY BGCOLOR=\"#FDF5E6\">\n" +
result +
"</BODY></HTML>");
     public void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
              doGet(request, response);
     public int find() throws EngineException, IOException
          PositioningEngine.connect();
              // Find the given device:
              Device[] devices = PositioningEngine.findDevice("NETWORK.IP-ADDRESS", ipAddress);
              if (devices.length == 0)
                     System.err.println("Device with IP address " + ipAddress + " not found.");
               PositioningEngine.disconnect();
               return 0;
          else
                     TrackedDevice device = new TrackedDevice(devices[0]);
                     // Create a simple handler for locations for one-time usage:
                     LocationEstimateListener estimateListener = new LocationEstimateListener()
                       public void handleLocationEstimate(LocationEstimate locationEstimate, TrackedDevice device)
                              // Change getLatestLocation to getAccurateLocation if you want
                              // a bit more accurate but a few seconds delayed location.
                              Location loc = locationEstimate.getLatestLocation();
                         final double coX = loc.getX();
                         final double coY = loc.getY();
                         try{
                         FileWriter file = new FileWriter ("C:\\Documents and Settings\\xamule\\Desktop\\Testing\\output\\output.txt");
                         String x = Double.toString(coX);
                         String y = Double.toString(coY);
                         String coor = x + "\t" + y;
                         file.write(coor);
                         file.close();
                         catch (IOException e){
                         System.out.println("Error..." + e.toString());
               StatusListener statusListener = new StatusListener()
                       public void handleStatus(Status status, TrackedDevice device)
                              System.err.println(new Date()+"\tStatus for device: " + status);
                     // Add listeners and start tracking
                     device.addLocationEstimateListener(estimateListener);
                     device.addStatusListener(statusListener);
                     device.setTrackingParameter("EPE.LOCATION_UPDATE_INTERVAL","6000");
                     device.setTracking(true);
                     // Wait until user inputs something. When he/she does, stop tracking and quit application
                     //BufferedReader in = new BufferedReader(new InputStreamReader(System.in));
                     //in.readLine();
                     // Stop tracking and disconnect from the positioning engine:
                     device.setTracking(false);
                     PositioningEngine.disconnect();
               return 1;
}

Well, it's kind of logical that as you put more jar files (classes) in Tomcat, it changes the error to ask for the classes (inside a jar) it cannot find.
There was a good class->jar finder on the internet some years ago, but i don't remember the address. Try looking for that and search all the missing classes (NotDefined) and their correspondig jar files.
Good Luck!

Any problems running a program compiled with SDK 1.4.2_14 with JRE 1.4.2_08

Hi,
Would there ever be a problem running a program compiled in Java 1.4.2_13 with JRE 1.4.2_08?
Why or why not? No guesses please.
Thanks

No such hope. The alternative to testing is to review changes made to each version leading up to 14. This is spelled out in each version's Release Document. There are a lot of changes. Most will not affect your program. Each change is relatively well described, but your problem will be to decide if your program will be affected by the change.
Or, do nothing, hope like hell that nothing breaks, and have an up-to-date copy of your resume.
If someone came to me saying a program couldn't be tested, I'd have serious concerns for that person's future.

Problems running 8.1.5.0.2 patch...

Similar Messages

Maybe you are looking for