Problems running ifssetup as root

IFS id on top of Oracle 8.1.6 on Solaris 7. The install was successful but at the end it asked me to run the script
ifssetup as root. It asked for the password for the IFS schema named ifssys which is ifssys. The error I receive is: invalid password or Oracle not available ORA - 01034. I can log in as ifssys/ifssys in sqlplus so I know the password is correct. I feel as though the root user can not access the
database for some reason hence the oracle not available error message.

Can you access the database using sqlplus as the root user? Does the root user have all the necessary environment variables set, such as ORACLE_HOME, PATH, and LD_LIBRARY_PATH?

Similar Messages

  • Oracle 11gR2 RAC: Running the script root.sh problem

    Folks,
    Hello. I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer and according to the tutorial
    http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
    I have been installing Grid Infrastructure using runInstaller from step 1 to step 9 of 10 in both VM rac1 and rac2.
    Now, I am running the script root.sh in VM rac1 and rac2 as below:
    [root@rac1 /]# /u01/app/grid/root.sh
    Output:
    CRS-4123: ohasd is starting
    FATAL: Module oracleoks not found
    FATAL: Module oracleadvm not found
    FATAL: Module oracleacfs not found
    ACFS-9121: Failed to detect /dev/asm/.asm_ctl_spec
    ACFS-9310: ADVM/ACFS installation failed.
    ACFS-9311: not all components were detected after installation
    'UpdateNodeList' was successful.
    [root@rac1 /]#
    [root@rac2 /]# /u01/app/grid/root.sh
    Output:
    CRS-4123: ohasd is starting
    FATAL: Module oracleoks not found
    FATAL: Module oracleadvm not found
    FATAL: Module oracleacfs not found
    ACFS-9121: Failed to detect /dev/asm/.asm_ctl_spec
    ACFS-9310: ADVM/ACFS installation failed.
    ACFS-9311: not all components were detected after installation
    Start of resource "ora.asm_init" failed.
    Failed to start ASM.
    Failed to start Oracle Clusterware Stack.
    [root@rac2 /]#
    As we see the output above, rac1 and rac2 get the same problems. in addition, rac2 fails to start ASM and Clusterware stack. Thus, I have 2 questions:
    First, the common problem for rac1 and rac2 :
    1)Module "oracleoks, oracleadvm, oracleacfs" not found
    2)/dev/asm/.asm_ctl_spec not detected
    3)ADVM/ACFS installation failed
    Do the above 3 factors affect Grid and DataBase Installation later ? If yes, how to solve these problems ?
    Second, how to start ASM and Clusterware stack in rac2 ?
    Thanks.

    you have 2 options:
    1. OEL 5.6 comes with 2 kernels, the original Red Hat, and Oracle UEK, you can choose not to use UEK
    or the one i would recommend:
    2. Upgrade Grid Infrastructure,
    *11.2.0.3.1* (patch 13348650, released about a 1 month ago) supports ACFS on UEK (starting with 2.6.32.200 IIRC)

  • Problems running Flash Builder 4.6 profiler

    Hello,
    I have a problem running Flash Builder profiler. When I click "Profile" it starts my web application, but nothing else happens inside Flash Builder itself - no new data appears in Profiler perspective, Flash Builder itself doesn't show any sign of doing something.
    My mm.cfg contains the next line: "PreloadSwf=C:/flash builder workspace/.metadata/.plugins/com.adobe.flash.profiler/11/ProfilerAgent.swf?host=localhost &port=9999"
    Additional details:
    OS: Windows 7
    Flash Builder version: 4.6
    Tested web browsers: Firefox, IE 8 - the same problem in both of them
    Flash player versions: ActiveX/Plug-in Version:11.7.700.169
    I made sure that ProfilerAgent.swf indeed exists in the location defined in mm.cfg. In addition, I tried to change port 9999 to other ports (both in mm.cfg and in Flash Builder). I also verified that the location of ProfilerAgent.swf appears in trusted locations of Flash Player.
    I would be very grateful if someone could help me to solve this problem.
    Thanks,
    Valeria

    R Grieve wrote:
    This sounds like something has gone wrong during installation. CSAR and CSLIBS references should be set up automatically during installation.
    There should also be no need to import the Flex SDKs as CS Extension Builder 2.0 ships with them included. It won't do any harm though having the CS Flex SDKs imported.
    Can you detail how you installed CS Extension Builder 2.0, please and where you obtained it from?
    Here are the installation instructions I would recommend starting from a clean FlashBuilder 4.6 instance:
    To install Adobe Creative Suite Extension Builder, download the ZIP file and unzip it into a root location (SDKRoot).
    Install Extension Builder in Eclipse with Flash Builder or Flash Builder Standalone:
    In Eclipse, choose Help > Install New Software.
    In the Install dialog, click Add.
    In the Add Site dialog, click Local... to browse to the SDK root folder or enter the URL of the update site.
    Name the site CS SDK and click OK to confirm the changes.
    Select the new CS SDK site in the "Work with" field.
    -- Select all the Adobe Creative Suite Extension Builder components.
    -- Click Next to confirm the selection.
    In the Install Details review dialog, click Next to confirm that you want to install all the components listed.
    Accept the terms of license agreements and click Finish.
    Re-start  Eclipse as recommended.
    I obtained it from Adobe and installed it using the Help > Install software option, but without unzipping it. Maybe that was it.
    Now I've done a clean installation and it works perfect. I did it with administrator permissions, don't know if it has anything to do with it, but I read it somewhere and did so just in case!
    Thanks a lot!

  • Problems running project in OPM 10.2 that was created in OPM 10.1

    Hi,
    I have a project created in OPM 10.1.0.27 and when I open it in OPM 10.2.0.110 I get the following message:
    "Your project is version 10.1.0.27 and needs to be upgraded to the latest version.
    A backup folder named 'Development 10.1.0.27-1' will be created for rollback and for reverting to the old version."
    I click "Continue" and the project is upgraded. However when I choose to "Build and Run..." with Web Determinations I get
    HTTP Status 500 -
    type Exception report
    message
    description The server encountered an internal error () that prevented it from fulfilling this request.
    exception
    javax.servlet.ServletException: Servlet.init() for servlet WebDeterminationsServlet threw exception
         org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
         org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:174)
         org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:879)
         org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:665)
         org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:528)
         org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:81)
         org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:689)
         java.lang.Thread.run(Unknown Source)
    root cause
    com.oracle.determinations.interview.engine.exceptions.RulebaseLoadingException: could not load rulebase: Capgemini presentation Arbetsförmedlingen 2
         com.oracle.determinations.interview.engine.InterviewRulebase.getRulebase(InterviewRulebase.java:177)
         com.oracle.determinations.interview.engine.local.FileRulebaseService.<init>(FileRulebaseService.java:95)
         com.oracle.determinations.interview.engine.plugins.rulebaseservice.InterviewRulebaseService.getInstance(InterviewRulebaseService.java:55)
         com.oracle.determinations.interview.engine.local.LocalInterviewEngine.initialise(LocalInterviewEngine.java:94)
         com.oracle.determinations.interview.engine.local.LocalInterviewEngine.<init>(LocalInterviewEngine.java:40)
         com.oracle.determinations.interview.engine.InterviewEngineFactory.createInstance(InterviewEngineFactory.java:19)
         com.oracle.determinations.web.platform.servlet.WebDeterminationsServletContext.init(WebDeterminationsServletContext.java:173)
         com.oracle.determinations.web.platform.servlet.WebDeterminationsServletContext.<init>(WebDeterminationsServletContext.java:104)
         com.oracle.determinations.web.platform.servlet.WebDeterminationsServlet.init(WebDeterminationsServlet.java:51)
         org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
         org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:174)
         org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:879)
         org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:665)
         org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:528)
         org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:81)
         org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:689)
         java.lang.Thread.run(Unknown Source)
    root cause
    java.io.IOException: Caught exception class javax.xml.stream.XMLStreamException: Unexpected schema version in screens file: 5
         com.oracle.determinations.engine.local.ScreensLoader.loadScreens(ScreensLoader.java:260)
         com.oracle.determinations.engine.local.ScreensLoader.loadScreens(ScreensLoader.java:139)
         com.oracle.determinations.engine.local.CachingRulebaseLoader.loadRulebase(CachingRulebaseLoader.java:282)
         com.oracle.determinations.engine.local.LocalEngine.getRulebase(LocalEngine.java:195)
         com.oracle.determinations.interview.engine.InterviewRulebase.getRulebase(InterviewRulebase.java:165)
         com.oracle.determinations.interview.engine.local.FileRulebaseService.<init>(FileRulebaseService.java:95)
         com.oracle.determinations.interview.engine.plugins.rulebaseservice.InterviewRulebaseService.getInstance(InterviewRulebaseService.java:55)
         com.oracle.determinations.interview.engine.local.LocalInterviewEngine.initialise(LocalInterviewEngine.java:94)
         com.oracle.determinations.interview.engine.local.LocalInterviewEngine.<init>(LocalInterviewEngine.java:40)
         com.oracle.determinations.interview.engine.InterviewEngineFactory.createInstance(InterviewEngineFactory.java:19)
         com.oracle.determinations.web.platform.servlet.WebDeterminationsServletContext.init(WebDeterminationsServletContext.java:173)
         com.oracle.determinations.web.platform.servlet.WebDeterminationsServletContext.<init>(WebDeterminationsServletContext.java:104)
         com.oracle.determinations.web.platform.servlet.WebDeterminationsServlet.init(WebDeterminationsServlet.java:51)
         org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
         org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:174)
         org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:879)
         org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:665)
         org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:528)
         org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:81)
         org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:689)
         java.lang.Thread.run(Unknown Source)
    note The full stack trace of the root cause is available in the Apache Tomcat/5.5.31 logs.
    Apache Tomcat/5.5.31
    Thanks
    Jussi

    The Web Determinations folder created when you use "build and debug with screens" is not upgraded automatically because it is virtually impossible for us to upgrade any customisations you may have made to that folder.
    However, if you haven't made any such customisations then you can just check the "replace deployed version of web determinations" box to fix this problem.

  • Problems running servlet due to missing classes?

    Hi everyone,
    I am doing a project which requires me to convert a java coding into a servlet. This java coding I am working on is some kind of location based service which tracks people (receiving an argument of a string as IP). It imports an external SDK called Ekahau SDK (some off the shelve product). Now I wish to convert it into a servlet so that the function that the java coding performs can be run from a webpage i created.
    I have previously posted a thread on this forum called "Converting java coding into servlets?" when I had trouble compiling the servlet. Now that I could compile the servlet already, I still have problems running the servlet from my browser.
    The webserver I am using is Apache Tomcat. Previously I was trying Apache HTTP server but since now I need to use servlet, I have shifted to Tomcat instead. I have been getting these "java.lang.NoClassDefFoundError:" when running the servlet from the browser. From the previous thread, I got suggestions from the replies saying that I need to put the jar files I need into my "C:\Tomcat\webapps\try\WEB-INF\lib" directory. I have been looking for the missing jar files from the internet and putting them into my "C:\Tomcat\webapps\try\WEB-INF\lib", but each time after adding a new jar file, I get another new "java.lang.NoClassDefFoundError:". Are the missing jar files really the problems? Cause it seems a bit weird to me that I need some many jar files which I dont even know why I need them for.
    The HTTP status 500 error look like this:
    description
    The server encountered an internal error () that prevented it from fulfilling this request.
    exception
    javax.servlet.ServletException: Servlet execution threw an exception
    root cause
    java.lang.NoClassDefFoundError: org/apache/excalibur/configuration/CascadingConfiguration
    com.ekahau.G.N.A(Unknown Source)
    com.ekahau.G.N.<init>(Unknown Source)
    com.ekahau.sdk.imp.yax.D.<init>(Unknown Source)
    com.ekahau.sdk.imp.yax.E.connect(Unknown Source)
    com.ekahau.sdk.PositioningEngine.connect(Unknown Source)
    coreservlets.testing.find(testing.java:75)
    coreservlets.testing.doGet(testing.java:36)
    javax.servlet.http.HttpServlet.service(HttpServlet.java:690)
    javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
    Here are the series of jar files I have been looking from the internet to add them into my "C:\Tomcat\webapps\try\WEB-INF\lib" directory:
    1) org/apache/commons/collections/Closure
    2) org/apache/log4j/Logger
    3) org/apache/commons/lang/Validate
    4) org/apache/excalibur/configuration/CascadingConfiguration
    Please help~~ Thanks a lot.
    My servlet coding is like this:
    package coreservlets;
    import java.io.*;
    import java.util.*;
    import java.io.IOException;
    import java.io.PrintWriter;
    import javax.servlet.ServletException;
    import javax.servlet.http.HttpServlet;
    import javax.servlet.http.HttpServletRequest;
    import javax.servlet.http.HttpServletResponse;
    import com.ekahau.sdk.*;
    public class testing extends HttpServlet
         String ipAddress;
         int result;
           public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
                  ipAddress = request.getParameter("deviceIP");
              try
                   result = find();     
              catch (IOException e)
                   System.out.println("Error..." + e.toString());
              catch (EngineException e)
                   System.out.println("Error..." + e.toString());
              response.setContentType("text/html");
                  PrintWriter write = response.getWriter();
              write.println("<HTML>\n" +
    "<HEAD><TITLE>Tryget</TITLE></HEAD>\n" +
    "<BODY BGCOLOR=\"#FDF5E6\">\n" +
    result +
    "</BODY></HTML>");
           public void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
                  doGet(request, response);
         public int find() throws EngineException, IOException
              PositioningEngine.connect();
                  // Find the given device:
                  Device[] devices = PositioningEngine.findDevice("NETWORK.IP-ADDRESS", ipAddress);
                  if (devices.length == 0)
                         System.err.println("Device with IP address " + ipAddress + " not found.");
                   PositioningEngine.disconnect();
                   return 0;
              else
                         TrackedDevice device = new TrackedDevice(devices[0]);
                         // Create a simple handler for locations for one-time usage:
                         LocationEstimateListener estimateListener = new LocationEstimateListener()
                           public void handleLocationEstimate(LocationEstimate locationEstimate, TrackedDevice device)
                                  // Change getLatestLocation to getAccurateLocation if you want
                                  // a bit more accurate but a few seconds delayed location.
                                  Location loc = locationEstimate.getLatestLocation();
                             final double coX = loc.getX();
                             final double coY = loc.getY();
                             try{
                             FileWriter file = new FileWriter ("C:\\Documents and Settings\\xamule\\Desktop\\Testing\\output\\output.txt");
                             String x = Double.toString(coX);
                             String y = Double.toString(coY);
                             String coor = x + "\t" + y;
                             file.write(coor);
                             file.close();
                             catch (IOException e){
                             System.out.println("Error..." + e.toString());
                   StatusListener statusListener = new StatusListener()
                           public void handleStatus(Status status, TrackedDevice device)
                                  System.err.println(new Date()+"\tStatus for device: " + status);
                         // Add listeners and start tracking
                         device.addLocationEstimateListener(estimateListener);
                         device.addStatusListener(statusListener);
                         device.setTrackingParameter("EPE.LOCATION_UPDATE_INTERVAL","6000");
                         device.setTracking(true);
                         // Wait until user inputs something. When he/she does, stop tracking and quit application
                         //BufferedReader in = new BufferedReader(new InputStreamReader(System.in));
                         //in.readLine();
                         // Stop tracking and disconnect from the positioning engine:
                         device.setTracking(false);
                         PositioningEngine.disconnect();
                   return 1;
    }

    Well, it's kind of logical that as you put more jar files (classes) in Tomcat, it changes the error to ask for the classes (inside a jar) it cannot find.
    There was a good class->jar finder on the internet some years ago, but i don't remember the address. Try looking for that and search all the missing classes (NotDefined) and their correspondig jar files.
    Good Luck!

  • Danger of running EmelFM2 as root: configuration blown away!

    Say you have a customized EmelFM2 configuration in /home/user/.config/emelfm2/ running as an ordinary user. Close EmelFM2, open up a root terminal and issue the 'emelfm2' command. Then close EmelFM2 and you'll see that the files within /home/user/.config/emelfm2/ are now owned by root! Run EmelFM2 as an ordinary user after this and these files will be overwritten with the default EmelFM2 configuration files, owned again by user rather than root. Your original customized configuration is lost forever ...
    I think I've pinned down where the problem lies in the source: lines 305-307 in 'config/e2_cl_option.c' read:
    if (e2_cl_options.config_dir == NULL)
    usedir = g_getenv ("XDG_CONFIG_HOME");
    If a configuration location isn't specified on the EmelFM2 command line, it defaults the location using $XDG_CONFIG_HOME which will still be set to the user's configuration directory even within a root terminal.
    Any ideas about this, or is it really an upstream bug?

    knopwob wrote:
    how did you open the root terminal? It sounds, like you are using
    su
    instead of
    su -
    Ah yes, yes ... you are so right. Using the latter (forcing a login shell?) indeed works as expected, using /root/.config/emelfm2/ by default.
    So, if I want to run EmelFM2 as root from (say) a keyboard shortcut, Gmrun or an Openbox menu item, what would be the safe way to do this? (I tried gksudo with the -l option, but it doesn't seem to work.)
    Edit: Of course, just 'gksudo emelfm2' should, and seems to, work okay.
    Last edited by ninian (2010-12-23 00:35:42)

  • I get error when I run Terminal /bin/bash: Please run this as root.

    Help!
    Every time I open Terminal I get:
    /bin/bash: Please run this as root.
    [Process completed]
    Any suggestions?

    FLYFI5H wrote:
    Help!
    Every time I open Terminal I get:
    /bin/bash: Please run this as root.
    [Process completed]
    Any suggestions?
    I wonder if there's a permissions problem with your /bin/bash. If you go to the /bin directory (presumably with the Finder's Go -> Go to Folder command, as Terminal isn't working for you), then do a "Get Info" on bash, what do you see as the permissions? Mine shows "system: Read & Write", "wheel: Read only", and "everyone: Read only".
    If you can't run Terminal, your diagnostic options may be limited. Do you have a second Mac that you could use to investigate the problem with this Mac in "target disk mode"?

  • Problem Running SSIS Package with a SQL Server Agent

    SQL Server: SQL Server 2012
    VS: Visual Studio 2012
    Hello,
          I have been having a problem running SSIS packages by using a SQL Server Agent job. I first created these SSIS packages in a separate IS project in Visual Studio. I imported the packages to the Integration Services (Package
    Store) instance on my SQL Server and tried to create a job that would run them from there.
          At first I read around about needing a proxy account to allow the agent/packages to access the file system since these packages are importing data from a flat file in the SQL database. So I created a temporary admin user to
    use as the user for the agent. I did this by going to Services.msc on the server and linked the account the agent's "logon as". Then arose another issue where I am getting an error about using the incorrect type for my connection managers.
    The connection manager "TestFile" is an incorrect type.  The type required is "OLEDB". The type available to the component is "FLATFILE". Source: Data Flow Task Flat File Destination [2]     Description:
    Cannot open the datafile "O:\*****\Success.txt"
    I am not sure what this even means as I am getting this error even with a test package that doesn't do anything with the database. I have just two flat file connection managers  in this test project one for grabbing the source file and one for
    creating the new test file.
    I am not sure what to do.
    Thanks in advance,
    Matt

    I accidently created two posts. The newest one has the details.
    I did not mean to.
    SQL Server: SQL Server 2012
    VS: Visual Studio 2012
    Hello,
          I have been having a problem running SSIS packages by using a SQL Server Agent job. I first created these SSIS packages in a separate IS project in Visual Studio. I imported the packages to the Integration Services (Package
    Store) instance on my SQL Server and tried to create a job that would run them from there.
          At first I read around about needing a proxy account to allow the agent/packages to access the file system since these packages are importing data from a flat file in the SQL database. So I created a temporary admin user to
    use as the user for the agent. I did this by going to Services.msc on the server and linked the account the agent's "logon as". Then arose another issue where I am getting an error about using the incorrect type for my connection managers.
    The connection manager "TestFile" is an incorrect type.  The type required is "OLEDB". The type available to the component is "FLATFILE". Source: Data Flow Task Flat File Destination [2]     Description:
    Cannot open the datafile "O:\*****\Success.txt"
    I am not sure what this even means as I am getting this error even with a test package that doesn't do anything with the database. I have just two flat file connection managers  in this test project one for grabbing the source file and one for
    creating the new test file.
    I am not sure what to do.
    Thanks in advance,
    Matt

  • Im trying to download itunes 10.5 but keep getting error message that says: There is a problem with this Windows Installer package. A problem run as part of the setup did not finish as expected. Contact your support personnel or package vendor.

    im trying to download itunes 10.5 but keep getting error message that says: There is a problem with this Windows Installer package. A problem run as part of the setup did not finish as expected. Contact your support personnel or package vendor. I am using windows XP 32 bit, all the other computers in my house downloaded just fine, no problems, however this is the computer my iphone is set up to, ive tried doing a virus scan, windows update, downloading other things, updating everything possible, everything works fine, its just itunes that wont download, anyone have any other ideas?

    Yes, I had found a similar solution also.  I'm running XP Pro, SP3.  I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair.  Then run the 10.5 exe.
    While the programme updated from version 8 of iTunes, my new iTunes is now a mess.  Not all of my music was in the same folder previously but it all showed up on iTunes.  Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing.  I haven't begun to work on that.

  • Problem running BI template installer after upgrade to 2004s

    Hello,
    After upgrading our Portal from EP6 to EP7 I have a problem running the BI template installer. The failure occures right at the beginning. The installer is looking for SLD related parameters in the 'CTC> Propertysheet SystemProperties'.
    But there are only three parameters in the sheet :
    HOST, SYSTEM_ID, INSTANCE_ID.
    If you instal a new 2004s system you see much more entries in the 'Propertysheet SystemProperties'.
    My question is how to add these missing entries into the 'Propertysheet SystemProperties'.
    Thanks
    Boaz

    Hi Kaylan,
    Actually there are only two things to manually fix after the CTC template run, which is mentioned in the Blog:
    - check/correct the following settings in the NetWeaver Administrator for evaluate_assertion_ticket and ticket according SAP Note 945055
    - the entry in table RSPOR_T_PORTAL for Platform and PDF fonts
    If you uncertain, you can remove the created objects as stated in the Document http://scn.sap.com/docs/DOC-11607 => Page18 in the Notes Section. the CTC template is creating these objects and entries again.
    Best Regards Roland

  • Having problem running an application

    I have recently installed jdk 1.2.2 and i have no problem running applet but when i try to run an application i get the message 1 error can't find<filename> . java.
    The path in autoexec.bat is fine. JRE File is include in my file jdk1.2.2.
    I have installed and deinstalled it a couple of time and can't make it work.
    Could someone help me please!!
    Thanking you in advance!

    doesn't sound like a path problem at all. you say when you try to RUN the app you get a message can't find filename.java. When you're running the app you run the binary class file i.e. java MainClass.class. If you're compiling the app you would do javac MainClass.java. Clarify your situation further if this does not help you out.

  • Problem running Lex in project created with Forte C++

    I am having a problem running Lex in project using Forte C++ 6. I believe I may have an installation problem, but can't figure out where it is.
    I created the project using Workshop. The make file generated is trying to run the following command: lex -o output/cmdscan.o cmsscan.l
    Which causes the following error message lex: illegal option -- o
    I checked the man pages and Lex doesn't have a -o option.
    Is there another version of Lex installed by Forte C++ that is different than Lex from Solaris?
    Ron

    I created the project using Workshop. The make file generated is trying to run the following command: lex -o output/cmdscan.o cmsscan.l
    Which causes the following error message lex: illegal option -- o
    I checked the man pages and Lex doesn't have a -o option.
    Yes, try in google.com
    Wishes , a [url http://personallfiles.com/Grant.Scholarship.asp]federal grant and scholarship-in need for me

  • Trouble printing something out. Getting error message: There is a problem running Adobe Acrobat Reader. If it's running please exit and try again. 6:6

    Getting message: There is a problem running adobe Acrobat Reader. If it's running, please exit and try again. 6:6

    Hi garryw,
    What version of Reader are you using, and are you on Mac OS or Windows? Do you get the same error when you try to print other PDF files, or is the problem specific to one PDF?
    For starters, please try the solutions listed in this thread: Re: There is a problem with Adobe Acrobat /Reader. If it is running ,please exit and try again.(0:104)
    Let us know how it goes.
    Best,
    Sara

  • Problem running car demo jwsdp-1.3,Tomcat 5.0

    Hello. I am having problems running the car demo on the jwsdp-1.3 with Tomcat 5.0.
    I get the following error message:
    "A jar file containing the Servlet 2.3 and JSP1.2 classes is required to compile
    carstore. Please define the property servlet.jar in your build.properties file and ensure
    that the file exists."
    I replaced the jsf EA 4 with the beta, and cleared out the cache in catalina as per the
    installation documents. I am probably missing something here. I checked my path,
    (I am using windows xp) and made sure the jsf directory was in the path.
    Any help would be greatly appreciated. Thanks in advance.
    regards,
    cyuno

    Thanks for your response.
    I changed the path to the tomcat 5.0 that came with the jwsdp-1.3.
    However, I am still getting the same error message. I have checked the build.properties file, the path, the path where ant is located, and the path is pointing to the jwsdp-1.3 directory.
    I have been working with the examples in the java web services tutorial, and for the most part have not had any problems running the examples using the jwsdp-1.3, ant and tomcat 5.0(except for CH 11, on the jaxb examples)
    Thanks again for your help
    regards,
    cy unpingco

  • Problems running Photoshop CS6 under OS 10.8 Mountain Lion

    Since updating the OS from 10.6.7 to OS 10.8 on iMacs (21" and 24" Intel 2.4GHz) I have experienced problems running Photoshop. The app boots up fine and I can start a project as normal, but when I click on a tool to change it's usage I get the spinning beach ball, this lasts about 5 - 10 seconds and then the tool drop down menu appears. After this, I get the beach ball appearing every few minutes  as I try to work, and the only way to get Photoshop running efficiently is to close it down  and then restart.
    Any ideas as to the cause? I've read on forums from both Adobe and Apple that apparently there are no compatibility issues between Mountain Lion and CS6 but I never had this problem previously under Snow Leopard.

    The next two remedial steps would be to reset all tools by right-clicking here:
    and if that does not resolve the problem, reset Preferences;
    To reset Preferences:
    If Photoshop is already open on your screen, close it (Quit). Then hold down Shift+Ctrl+Alt (Win) / Shift+Command+Option (Mac) on your keyboard and start Photoshop.
    A dialog box will pop up asking if you want to delete the existing Preferences file (the "Settings"). Click Yes in the dialog box. The existing Preferences file will be scrapped and a new one will be created.

Maybe you are looking for