'Problems saing the authorization information on the computer'

Hello, I have a problem with the iTunes Store.
the thing is that when I try to download a song, search for purchases, give authorization to the computer, or anything related to the iTunes Store, the itunes keeps sending me the same message; "'Problemas saving the authorization information on the computer' Try reinstalling iTunes or repairing it".
And, after erasing it and instaling it 4 times, the same problem appears.
The problem is that I purchased 2 songs and I can't listen to them, although the iTunes tells me that all the purchases has been finished, and I lost the money.
Anybody knows what can I do?
Thanks anyway for reading.
PS: Sorry if my english is to hard of understanding, I'm from Chile.

Please try this:
http://support.apple.com/kb/TS1277
It seems to do with deleting the Shared folder under the Users directory.

Similar Messages

  • HT1206 There was an error storing your authorization information on this computer.The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be ch

    There was an error storing your authorization information on this computer.The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed.

    I'd try the following document with that one: 
    iTunes: Missing folder or incorrect permissions may prevent authorization

  • My MB Pro is no longer syncing my iPad in iTunes. It did in the beginning, however I had to change my MB Pro password. Now I get a permissions error message trying to sync: "error storing your authorization information on this computer." Can you help?

    My MB Pro is no longer syncing my iPad in iTunes. It did in the beginning, however I had to change my MB Pro password. Now I get a permissions error message trying to sync: "error storing your authorization information on this computer." Can you help?

    First I would just try deleting the SCInfo folder, restart your computer, open itunes and see if you are still getting the error, at that point if you are it is a permissions error with the computer specificaly and not in itunes.
    http://support.apple.com/kb/TS1389
    that is for deleting the scinfo folder. scroll to the bottom of the article and the steps are there

  • I have 3 PC's.  Two of them I use at 2 different locations and only use them 6 months a year.  So, if I have Icloud for my calendar, and turn on a computer that has not been used for 6 months, does all the old information on that computer to go Icloud?

    I have 3 PC's.  Two of them I use at 2 different locations and only use them 6 months each year.  When I turn on a computer that has not been used for 6 months, does all of the old information from that computer end up in Icloud?  Does Icloud push all the new calendar and contact items over the old items?

    A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
    No content is affected by this procedure.

  • There was an error storing your authorization information on this computer

    Continue to get the same message over and over again and I cannot sync my iphone.
    "there was an error storing your authorization information on this computer"
    Apple support has not offered any assistance.
    I have uninstalled and reinstalled the software several times.
    Can anyone please help me this is so frustrating and apple has been no help.
    Thank you

    I have also searched through all discussions similar to this one and nothing has proven to work.
    So anyone please help!

  • TS3899 Having trouble accessing my email account thru the mail app, after entering the account information in the settings page, hotmail returns with the error message " The user name or password for Hotmail is incorrect

    Having trouble accessing my email account thru the mail app, after entering the account information in the settings page, hotmail returns with the error message " The user name or password for Hotmail is incorrect". Help

    Hotmail is having problems:
    http://bostinno.streetwise.co/2013/08/15/hotmail-outage-hotmail-is-down-for-user s-still-photos/
    http://www.engadget.com/2013/08/14/outlook-outage/
    http://www.infoworld.com/d/applications/microsofts-skydrive-outlookcom-are-down- some-users-224940
    http://mashable.com/2013/08/14/outlook-down/
    http://techcrunch.com/2013/08/14/microsoft-acknowledges-outlook-com-messenger-sk ydrive-outages/

  • Error -1074384569; NI-XNET: (Hex 0xBFF63147) The database information on the real-time system has been created with an older NI-XNET version. This version is no longer supported. To correct this error, re-deploy your database to the real-time system.

    Hello
    I have a VeriStand-Project (VSP) created with my Laptop-Host (LTH) which works with my PXI, while
    deploying it from my LTH. Then I have installed the whole NI enviroment for PXI and VeriStand use on a
    industrial PC (iPC). I have tried to deploy my VSP from the iPC to the PXI but the following error
    message arose on my iPC:
    The VeriStand Gateway encountered an error while deploying the System Definition file.
    Details: Error -1074384569 occurred at Project Window.lvlibroject Window.vi >> Project
    Window.lvlib:Command Loop.vi >> NI_VS Workspace ExecutionAPI.lvlib:NI VeriStand - Connect to System.vi
    Possible reason(s):
    NI-XNET:  (Hex 0xBFF63147) The database information on the real-time system has been created with an
    older NI-XNET version. This version is no longer supported. To correct this error, re-deploy your
    database to the real-time system. ========================= NI VeriStand:  NI VeriStand
    Engine.lvlib:VeriStand Engine Wrapper (RT).vi >> NI VeriStand Engine.lvlib:VeriStand Engine.vi >> NI
    VeriStand Engine.lvlib:VeriStand Engine State Machine.vi >> NI VeriStand Engine.lvlib:Initialize
    Inline Custom Devices.vi >> Custom Devices Storage.lvlib:Initialize Device (HW Interface).vi
    * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * • Unloading System
    Definition file... • Connection with target Controller has been lost.
    The software versions of the NI products (MAX/My System/Software) between my LTH and the iPC are
    almost the same. The only differences are:
    1. LabView Run-Time 2009 SP1 (64-bit); is installed on LTH but missing on iPC. The iPC has a 32-bit system.
    2. LabView Run-Time 2012 f3; is installed on LTH but missing on iPC.
    3. NI-DAQmx ADE Support 9.3.5; something strage on the LTH, because normally I am using NI-DAQmx 9.5.5 and all other DAQmx products on my LTH are 9.5.5. That means NI-DAQmx Device Driver 9.5.5 and NI-DAQmx Configuration 9.5.5.. On the iPC side all three products are 9.5.5.. That means NI-DAQmx ADE Support 9.5.5, NI-DAQmx Device Driver 9.5.5 and NI-DAQmx Configuration 9.5.5..
    4. Traditional NI-DAQ 7.4.4; The iPC has this SW installed. On the LTH this SW is missing.
    In order to fix this problem I have formatted my PXI and I have installed the following SW from the iPC:
    1. LabVIEW Real-Time 11.0.1
    2. NI-488.2 RT 3.0.0
    3. NI_CAN 2.7.3
    Unfortunately the above stated problem still arose.
    What can I do to fix this problem?
    I found a hint on http://www.labviewforum.de/Thread-XNET-CAN-die-ersten-Gehversuche.
    There it is written to deploy the dbc file againt.
    If this is a good hint, so how do I deploy a dbc file?
    I would feel very pleased if somebody could help me! :-)
    Best regards
    Lukas Nowak

    Hi Lukas,
    I think the problem is caused by differenet drivers for the CAN communication.
    NI provides two driver for CAN: NI-CAN and NI-XNET.
    NI-CAN is the outdated driver which is not longer used by new hardware. NI replaced the NI-CAN driver with NI-XNET some years ago, which supports CAN, LIN and the FLEXRAY communication protocol.
    You wrote:
    In order to fix this problem I have formatted my PXI and I have installed the following SW from the iPC:
    3. NI_CAN 2.7.3
    NI CAN is the outdated driver. I think that you should try to install NI-XNET instead of NI-CAN on your PXI-System, to get rid of the error message.
    Regards, stephan

  • I was transferring my information from my old iphone to the new one, and i forgot that i had some pictures in the new one. i did the restoring information and the pictures in new one are gone. how can i get them back????

    i was transferring my information from my old iphone to the new one, and i forgot that i had some pictures in the new one. i did the restoring information and the pictures in new one are gone. how can i get them back???? please

    Only way to get it back is to restore your phone from a backup, if those pics were included in that backup.
    But most likely those pics are gone.
    What you should've done was import http://support.apple.com/kb/HT4083 the pics to your computer and after you restored from your old backup, you could sync those new pics to your phone via itunes.

  • Is there a way to remove the changes to the URL Bar, specifically the status information and the target URL?

    To begin, I utterly despise the changes to the URL Bar and the removal of the Status bar. In order to stay with the latest version of Firefox I am attempting to recreate the look and feel as best I can.
    I have already installed the Status-4-Evar extension. The only thing that remains is to remove the status information and the target URL from the bar.
    Are there any settings in about:config that will allow me to make these changes?
    EDIT: Status information can be removed by toggling. status4evar.statusInUrlBar. Still looking for a way to remove the target URL...

    This code in [http://kb.mozillazine.org/UserChrome.css userChrome.css] below the @namespace line seems to remove the links that appear on hover.
    <pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
    .urlbar-textbox-container {color: inherit !important;}
    .urlbar-textbox-container-children {opacity: 1 !important;}
    .urlbar-over-link-box {opacity: 0 !important;}
    </nowiki></pre>
    See http://kb.mozillazine.org/Editing_configuration#How_to_edit_configuration_files

  • TS3988 The correct information in the email address, Full name and Incoming mail server panes are greyed out, and I can get no further in bring my iCloud a/c online. Any ideas? Thanks.

    I've just updated and installed Mountain Lion. I've clicked for iCloud for Mail. The correct information in the email address, Full name and Incoming mail server panes are greyed out, and I can get no further in bring my iCloud a/c online. Any ideas? Thanks.

    They are grayed out because they are automatically set up whey you check Mail in System Preferences.  If you didn't do that, go back and do so and your iCloud email account will be set up automatically.

  • In the iSO 7 in the map app: Why we cann't get the direction information of the riad in the meddileast region

    I cann't get the direction information of the roads in my country Saudi Arabia

    Turn bu turn navigation in Saudi Arabia is not supported.
    http://www.apple.com/ios/feature-availability/

  • What is the transaction to see the Authorization objects in the CRM system?

    Hello Guys,
    Please let me know transaction code to see the Authorization objects in the CRM System?
    Thanks in advance.
    Regards,
    Vinay

    Hi Nagur,
    With T.Code SU21 you can see the Authorization objects in the CRM System. If you want to see Authorizaion object for a particular Transaction Code then the T.Code is SU24
    Thanks & Regards
    Shiva Vekat

  • You don't have the authorization to start the workflow

    hi,
    We are working on integration of ESS with EP.
    From EP when we sent leave request, We are geting an error
    "You don't have the authorization to start the workflow".
      Can anyone help us on this?
    Thank you very much in advance.
    regards,
    Uttam.

    Hi Linc,
    Thanks for replying so quickly.
    I actually figured out what was wrong and I feel so foolish not for looking here first. But the folders themselves were not locked, it was each individual song that was. So all I did was open up the folder and the following sub-folders to reveal the songs. I then would right click on each song > get info > and then the locked button at the top would be highlighted in blue. All I had to do was click the button, and poof the song was unlocked and subsequently the entire folder was unlocked, then I could delete the whole thing. I had to do this about 150 times for each song hahaha but it all worked out.
    Thanks again for your time

  • HT1918 When I try to purchase a apps, system require me to verify my credit card account.  I've provided all the complete information of the credit card but system always ask me to contact iTunes support to finish this transition, why ?

    When I try to purchase a apps, system require me to verify my credit card account.  I've provided all the complete information of the credit card but system always ask me to contact iTunes support to finish this transition, why ?

    Answered in your Other post on this Topic...
    https://discussions.apple.com/message/24053626#24053626

  • REG: Delete the card information inside the Payment Cards tab in XD02.

    Hi All,
    Requirement is to delete the card information inside the Payment Cards tab in XD02.
    Providing any hints/suggestions / sample code for BDC in doing this shall be greaful.
    Deleting the Credit card information like CCINS,CCNUM,DATBI,CC_GUID,CCMASK etc from XD02 screen.
    Waiting for your replies.
    Thanks
    Srikanth

    Hi,
    You do it using BDC. Also you can do it using the FM: SD_CUSTOMER_MAINTAIN_ALL. Here in every table there is field KZ. You need to pass D (to delete) for the required tables.
    Before going for BDC try to use this FM.
    Thanks
    Subhankar

Maybe you are looking for