Problems saving in Version sets

After editing raw images, I try to save the edited image as a jpeg file in a version set with the original raw image.
However what I get is the edited jpeg and the edited raw...wiuth the original uneditted raw file being lost.
Anyone got any suggestions?

OK, I understand now. I do use the open image button, and then select "save in version set with original". When I open the version set, the 2 images are the jpeg and the raw of the edited file.
I do not see the original raw.
BTW, this has only started to be an issue. Previous edits even with PSE11 have contained the original file. I dont know if I could have inadvertently made a change to the settings.
I appreciate your suggestions.

Similar Messages

PSE 12.1 not saving in version set

I have been successfully using PSE 12.1 on Windows 7 since last August. However I've started having problems in the last 2 or 3 days. I start the Organizer and select a photo to edit. When I "save as" I get one of two results. In the first case it saves the photo in the proper folder but it does not create a version set with the original. In the second case, the editor locks up and eventually I get a message saying the editor is not responding and windows is looking for a solution. Usually it saves one photo as in case one above, and then fails to respond on the second photo and I shut it down. Over the past 2 days I have uninstalled PSE 12 and reinstalled 3 times, upgrading to 12.1 each time., but I get the same result. Any ideas what is causing this?
Update: I've given up. Uninstalled for the last time; purchased PSE 13; everything working with new version.
Message was edited by: Margaret Thompson

27Prac a écrit:
This is odd . Did you tried with clean preferences. To clean preferences go to "Edit Menu>PReferences>General" and click the button "Reset Preferences on next launch". Relaunch PSE.
This is not new, already several posts on this forum and one bug report:
http://feedback.photoshop.com/photoshop_family/topics/save_in_version_set_not_working_in_p se12
See:
http://forums.adobe.com/message/5766588#5766588
Today's state of the problem seems to be that this happens not only with saving in version sets in PSE12, but also on simple saves with 'include in the organizer' checked.
It happens on previously converted catalogs, not on new ones.
It happens when the process 'elementsautoanalyzer.exe' is running (you can 'kill' it from the Windows task bar, but you must do it every time you start the organizer. Deleting or renaming this file seems to work.)
This seems also to be a problem for people using the 'watched folders'.
So, to prevent the problem : kill the elementsautoanalyzer.exe every time you start the organizer.
To recover the edited files not included in the catalog, do a manual 'get photos and videos' from the already gotten files.
It's important to do so, otherwise the edited files won't be catalogued and be missing if you do a backup.
If necessary, use the automatic stacking feature by visual similarity to stack your originals with your edited versions, since you can't create version sets.
If you can share your experience on the above feedback link, please do it and add your vote.

Elements 11 problem with Saving to Version Set

I have upgraded toElements 11 but when i go to save a file to " save in version set with original" it will not let me, as the tick box is blanked out?

It maybe a question of permissions. Are you running from an administrators account or a user account? If the latter do you have full read/write permissions for the application? What operating system do you have ?
On Windows try making a direct shortcut for the Organizer and Editor. Make sure you have the correct file path as there is more than one exe file. You can then launch the programs directly from the desktop bypassing the welcome screen. This is generally better as the welcome screen leaves background processes running.
Right click anywhere on the desktop and select New >> Shortcut
Then click the browse button and navigate to:
"C:\Program Files (x86)\Adobe\Elements 11 Organizer\PhotoshopElementsOrganizer.exe"
Then click Next; then click Finish
Then make a direct shortcut for the Editor in a similar manner.
On Windows, Right click anywhere on the desktop and select New >> Shortcut
Then click the browse button and navigate to:
"C:\Program Files (x86)\Adobe\Photoshop Elements 11\PhotoshopElementsEditor.exe"
Then click Next; then click Finish
N.B. on 32 bit systems navigate to Program Files
Right click on each of the new desktop icons and launch by choosing “Run As Administrator”
Keep both applications running but try to edit and save a photo as before.

Saving in Version sets

I have Elements 4.0 for windows. All of a sudden I can't save my edits as versions sets and they don't appear in organizer at all. I think they are getting saved, I just can't find them. Also, I started having problems tagging pictures, sometimes it works other times it won't. I reinstalled the program, but I'm still having trouble. Anyone know what's going on? I need help - I'm three years behind on my pictures and now I'm at a stand still!

Try File > Catalog > Recover.

PSE5 Not saving in version sets

How do I get edits to save in version sets with the original (RAW) file. I am using PSE5 on a Windows PC. This used to work fined but not since reinstallion. I have 800+ RAW files to work on and want to use version sets as I used to but whatever I do it doesn't seem to want to cooperate.
Can anyone help?

Do a file->catalog->Recover.
-Trish

Having problems saving PDF version properties in PDF files

We have to set the Acobat version to Adobe Acrobat 5.0 (PDF 1.4) in our PDF files.
The PDF Version properties change even after they are set using any of the following 3 methods:
1.      Document > Reduce File Size and then Save As
          (In my past experience - if you only “save” the file, it doesn’t save some of the settings)
2.      Also set them using - Advanced   > PDF Optimizer and then Save As.
3.      These properties were originally set in the Adobe PDF Settings in the Word file before the PDF was created:
Compatibility : Adobe Acrobat 5.0 (PDF 1.4)
When I close the file and re-open, the version is not what I set – it doesn’t save.
Is there something that has to be set in Adobe to save the PDF Version property??
I'm using Adobe Acrobat Pro v9.
Thanks -- Karen

If you use Save or Save as (except the new AAx move of Reduce File Size and PDF Optimize to the save as menu) you will get a current version based on your Acrobat. To get a prior version you have to either create it with compatibility set in the print driver or PDF Maker or you have to used Reduce File Size or PDF Optimize to get a prior version. Maybe that is why they moved those two items to the save as menu so folks would realize that option.
If you save the file (other than with one of the 2 options mentioned) the version will revert to your current version. It sounds like you may be doing that in some way and losing the type. You can check by opening the PDF in a text editor (like WORD) and looking at the first characters of the file -- should read PDF 1.4. If it does, then you were successful. Of course, do not save the file from the text editor.
Since you are using AA9, DO NOT use Save As. Use either the Reduce File Size under the Document menu or the PDF Optimize under the Advanced>Print Production menu as I recall. Then close Acrobat, but do not save again. If you do, you will be right back to an AA9 document.

Problems using version set in Elements 9

Hi!
I have problems using the version set. When saving files in the Element 9 editor I can not mark the "version set" option, its not highlighted and not possible to mark or use. Is there a basic setting that I´m missing or??? I have the MAC version of Elements.
Also I have noticed that when I have edited a file in the Elements 9 editor and I come back to the Organizer the editor have changed the time of the photo? This means that its rather difficult to find the photo in the Organiser. It often change the time 1 or 2 hours.
As I cant use the version set I can not keep my tags on the edited pictures. Is there a setting for keeping the tags and catalogue belongings to a edited file?
As of today this software makes no sense to me and I can basically not keep working with it as it does not support basic functionality that I´m dependent on.
Best Re
A

I’m not seeing this in my own version sets in PSE9; when I expand the set every image has the same date and time under each thumbnail.
I’m wondering if you have used the “save for web” command at some point, which
wipes all EXIF metadata, including the date & time of the original - in order to optimize the image for display on the internet. So if you have imported such an image Elements has to make an estimate. Apart from this known scenario I can’t really explain what’s going on.

Can you please help solve my sudden problem saving photos in version sets?

Saving edited photos in Version Set
Ever since I have owned the excellent Adobe Photoshop Elements 4.0, I have saved edited photos in a version set with the original. Now, in spite of the 'save in Version Set' box being ticked, they are saved separately. When the edited photo is saved, it says 'imported from hard disk'. It has never said this before.
When the photos are imported from the camera, they are saved in Adobe/Digital Camera Photos/code provided by photoshop (eg 2006-03-10-1632-38). Under properties/history it says imported from Panasonic DMZ-TZ3. This has not changed. All the saving arrangements appear to be unchanged.
Photos (thousands!) have been successfully edited and saved in a Version Set. Under properties/history it says 'edited version' and 'imported from Panasonic DMZ-TZ3'.
Suddenly, photos that have been edited and should have been saved in a version set, now say under properties/history nothing about being edited. They say 'imported from hard disk'. In other words they are being treated as a new photo.
I really hope you can help me to solve this infuriating problem. Please ask if you need more information.
I work on a PC with Windows XP
Michael

Michael: are you still using an old version o0f PSE (e.g. PSE V4)? Problems similar to the one that you described are relatively frequent in old PSE Versions ( I was suffering a lot from them)..... and there are quite seldom in newer PSE versions. Unfortunately, I do not remember which PSE Version became much better in this area (was it V5? or V6?)
If using an older PSE version and encoutering often the problem: consider to migrate to a newer PSE Version..

Problems with version sets

I have PSE 6. When I open a JPG from the Organizer using Full Edit and then try to save, I do not get the option to save the image in a version set (even though I do have the Organizer option checked). However, I noticed that invoking Full Edit also prompts the Organizer to say there is a new file in the watched folders. This "new" file is the very same file in the very same location. If I accept to add the file to the Organizer I get two thumbnails in the Organizer, both pointing to the same file on disk. If I do this then the "Edit In Progress" banner appears on the "new" thumbnail and the editor does allow me to add the image to the version set. I am sure that I did not have to do this before, I would expect Full Edit to just open the image, mark it in the Organizer as being edited, not try to add it back to the catalog and allow me to save the edit in a version set. What might be causing this behaviour?
I also have similar and I think related problems with RAW images too, but I am hoping that resolving the above will resolve the RAW issue too.

I should have said that I did try that but it still prevented me from creating a new version in a version set when saving. It is as if the editor needs to start on a copy of the Organizer's entry to allow version sets, as if the original is somehow "locked". Could that be possible?

Problems with saving and versions

i know you're all preparing popcorn for the iPhone release, but maybe one or two have got a minute to read this and help me
i'm using lion for a while, and ever since i'm losing files.
my problem is not the system, maybe i just didn't get how to use it, but i'm blaming having lost my files. :/
so, there's versions, and autosave. but simetimes i dran 'n drop a file i'm working on trom my taskbar (the little icon next to the filename) to my desktop. sometimes, but not always, it's corrupted. i don't always notice right away, so when i close the document (without saving of course) it's just a file icon, but there is no possible way to open it without getting a message.
i don't know if i'm not using it right, but "they" say you don't have to save your files, they say your files are saving versions, but so many times i can't go back to a version.
also i'm using a lot of photoshop, and just now something happened, and not for the first time:
i opened up a .psd that i was working on yesterday. when i wanted to save it (with crtl-S), it said "Could not save *documentname*.psd because the file is already in use or was left open."
of course the file is in use and open. how does the mufassa expect me to save a file without opening it up? and why would i save a file without using it before? this is not the first time, and i always have to save it using a different name, and then delete the old file...
i might have a thinking problem, but maybe you can still help me out?
can someone update me on how to optimize my workflow, so i can spend more time working, and less time looking for files or restarting documents?
thx and peace,
Marc

Hi there
I'm a bit perplexed and more than a bit concerned with something you said:
mheilZP wrote:
The other person I worked with had no problems accessing and saving new versions of the file, but for some reason it fouled up on me. I've never had this happen before and was wondering why it happened and what I should do to avoid it happening again.
This seems to infer that you are sharing the same project with another person? If I'm correct in my understanding, there are two major things wrong here.
1. You cannot share a project in a fashion where two or more users make edits to it at the same time. Doing so is an open invitation to disaster.
2. In order for two or more users to have access to the same Captivate project, it would have to exist on a network drive. Editing projects while they are stored on a network resource is another open invitation to disaster.
The bottom line here is that Captivate files must be edited from the local C drive by a single author. You may copy them to a network location for the purposes of backing them up, but that's it.
Cheers... Rick
Click here for Adobe Certified Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

Versions Set not saving in Organizer 9

Using Organizer and PSE 9 on a Mac, about 13,000 photos in single catalog.
Had been using Versions Sets with no problem, but now the edited image is not being added to the version set. It works okay if I do the edit in Organizer - the edited version saves in version set. But if I go out to PSE for edits and save edited version, a version set is not created. Using Save command in PSE and the "Save as Version Set with Original" box is checked. Have closed Organizer and reopened, also ran the repair catalog in Organizer, but no change.
Thanks,

Same issue here. Some files it works, some not. I cannot find any elements that would be causing this. I thought the file name could be too long, or contain special characters, but I have been able to make it work in some cases.
I'm not sure forums are monitored so I guess we're just out waiting for an update that would miraculously correct this...
In the mean time, when you do edit within an album, the edited files gets added to the catalog but not to the album, which is left with just the original. Very unuseful...
In the hope that someone will find a solution to this.

Problem with version sets in Elements 12

I have just started using elelments 12. I have been having problems with inconsistency in forming version sets. Some sets forms as expected. However, quite often after editing, when returning to Organizer the edited picture is not in a version set with the original and in fact is not even visible. I can get to the edited version only through the "Open" tab in the Editor. I have check the appropriate "Save in version set" in the save menu. Suggestions?

Seems you have the same problem :
http://forums.adobe.com/thread/1309160?start=0&tstart=0
The source of the problem is not clearly found today. It seems that happens on previously converted catalogs.
A workaround seems to have been found : killing the autoanalyzer.exe process in the task manager.

Version set problem

I have been using version seta for years,but now when I try to save an edited picture in a version set the organizer throws it away. Anybody else have this problem?

My catalog is roughly 12,000. The view I use shows the version set and the file information, i.e. Nef, Jpeg details.
Tim

Problems accessing Version sets in Organiser

I have upgraded by download from PE10 to PE13. In the organiser my photos have a version set thumbnail in top right but no expand button or function via the edit menu which is greyed out. How do I get the version set to expand?

Hi,
You need to switch the grid view to the old classic style by using Ctrl (Cmd) + D or go to the View menu and check Details.
You should then see the version set open/close icons next to the thumbnail.
Brian

Version sets in 12 not working correctly

Do other people have an issue in Photoshop Elements 12 with it not consistently saving photos in version sets? someties it works correctly and somethimes it doesn't and it also bumps me out stating it is a new photo. i do have it configured to always save in version sets and to not notify me with new photos?
Emily

Thank you so much. We'll see if this fixes the problem. I had worked with
Adobe for many many hours in August and they couldn't figure out why it was
doing this. how come they don't know their own product!!!
Emily

Problems saving in Version sets

Similar Messages

Maybe you are looking for