Problems sending and receiving faxes on mx892 all in one
I seem to be unable to set my mx892 for faxing or for printing. Every time I want to use the printer I have to go through the menu and reset everything again--sometimes it works sometimes it doesn't. The machine continues to scan over and over when I only need one copy. I can only use the inside glass to copy. Faxes are much the same--to fax I have to go one sheet at a time and the only setting I seem to be able to use is the inside glass not the feeder that allows you to fax (or print) several sheets at a time. It would be a fair guess that I am not a technical person at all and trust me I do feel stupid, but I really need help with this. I have a small business and need to be able to use this machine. I would appreciate any help. Thank you.
Hi patfromvermont!
Please make sure you are loading in the paper through the following procedure:
1. Make sure that any original has been removed from the platen glass.
2. Load a document in the ADF.
(1) Open the document tray.
(2) Insert the document in the document tray until you hear a beep sound.
Load the document WITH THE SIDE TO SCAN FACING UP in the document tray.
REFERENCE
When you set the alarm to be silent in Sound control of Device user settings, the alarm will not beep even if the document is inserted in the document tray.
(3) Adjust the document guides to match the width of the document.
Do not slide the document guides too hard against the document. The document may not be fed properly.
If you are running into any further difficulty, we'll be happy to help! We'll need a little more information. Please visit the link below to let us know the version of Windows or Mac in use and we can follow-up with step-by-step directions regarding any further errors you are running into. Thanks!
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Similar Messages
-
I have hp officeject pro 8600 all in one. I can send or receiving a fax. I have tested fax test it printed out with
dial tone detection failed.Hi @kimychong,
Thank you for visiting the HP Support Forums! I see you are having problems sending and receiving faxes with your HP Officejet Pro 8600. You ran a fax test and the dial tone failed. Please continue troubleshooting below:
Cannot Send or Receive Faxes
If you are still running into fax problems after the troubleshooting has been done leave me with the following information:
1. What is the Exact model of HP 8600 you are using as there are a few in the series?
2. What is your current Operating system, Windows or Mac and which version?
3. How is the printer connected, USB or Wireless?
4. Do you get any error messages when sending or receiving faxes?
5. What kind of phone line do you have, digital, analogue or VoIP?
I hope to hear from you soon.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping! -
Sending and receiving fax documents
I am wondering if there is a way to send and receive fax documents through my iMac. My internet connection is through a cable modem and have only found a way to fax using a modem. Any ideas would be great. Thanks
Unless your iMac has a built-in modem port, you will have to use an external fax modem for direct faxing. Otherwise, you can use an internet fax service such as eFax or FaxZero (US/Can only.)
Matt -
Sending and receiving faxes from HP3150
I have an HP3150 connected to my home WiFi network. How can I use it to send and receive faxes?
Thank you,
PeteHello @abinrml4,
Welcome to the HP Forums!
I understand you would like to know how to send and receive faxes. I will do my best to assist you! What type of printer do you have? Click here to find out: Model Number.
What type of added features do you have on your fax phone line? Please list this information on this post. I will be looking forward to hearing from you. Have a great day!
I worked on behalf of HP. -
Help please:set up mac 10.4.11 with ext dsl modem to send and receive faxes
Hi and thanks in advance. I have a G4MDD dual processor, and have a dsl modem for internet connection. I want to set up to send and receive faxes. I can make and receive phone calls while connected to the internet. any ideas or help appreciated. Thanks again.
Message was edited by: R.AndomI cannot send/receive faxes via my dsl, I have to use my regular phone line. (My DSL modem only has one phone jack port, and that is to connect it to the outside world. Pretty sure this is true of every DSL modem.)
When I need fax capability, I unplug the phone line to my telephone at the phone end, and plug that cable into the modem port in the back of the G4. (The modem is built-in.) After sending / receiving, I switch the cable back to the phone.
You set up fax capability in System Preferences / Print and Fax. -
Does Tiger need Fax software to send and receive faxes?
I need an inexpensive way to receive faxes. I will be buying a usb modem, likely the Apple modem. Do I need to also purchase fax software or does Tiger make it possible to send and receive faxes?
I found out from another query that yes I can send and receive faxes by going to the Print/Fax icon in System Preferences.
-
Can you send and receive Fax`s with Firefox?
Can you send and receive Fax`s with Firefox? If so how do you do it?
Hi invariance,
Your printer supports eFax only, not analog faxing. To eFax, you will need to go through the registration process from the front panel of the printer. This will give you 20 faxes per month for free. If additional faxing is needed, you will need to cantact eFax and set up an account. There will be a fee for additional faxing capabilities.
I was an HP employee.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks. -
Problem sending and receiving BT mail
unable to send / receive BT mail , display pop up showing "unable to send from selected server"
Hi, LesHillbrae.
Thank you for visiting Apple Support Communities.
I understand that you are unable to send or receive email. Here is the best resource to go through when troubleshooting issues with email.
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/TS3276
Cheers,
Jason H. -
Problems sending and receiving emails using exchange when on wifi - OK when using Sim Card
I've an iphone 4S using Exchange to link up with company server, this works fine when using 3G - phone's Sim Card. But when I join a wifi network I can no longer send and receive emails until I disconnect from the wifi network.
Has anybody any ideas?Hi Derick,
you need to make sure the following is met:
1- router is correclt setup and antennas are plugged
2- users are withint good range from the router
3- use a good channel for the router, one of either 1, 6 or 11. try to figure out which is the best channel to choose using a freeware site survey tool.
4- ssid configuration doesn´t involve eap and session timeouts.
if you have doubts, let me know
cheers
Serge -
Problems sending and receiving texts, please need help ASAP!
So for the past few days I have had trouble receiving texts on my Samsung Intensity II. I can send them just fine but when receiving them they are either very very late or they dont show up at all. Why is this? What should I do to fix it?
Here are the questions I need answered:
1. How do I improve this and start being able to receive texts again? I havent been able to receive any texts for the last few hours.
2. I dialed *228 and chose option 2 to update my roaming thinking it might help but it didnt. I can still send text messages but havent received any. All it did was remove the Verizon Wireless banner from the top of my phone. Is this bad? I sort of want that back..is it bad that its missing? Does it mean *228 was detrimental to my phone? How do I get the banner back?
3. Lastly, is there a way to possibly reset my phone and fix this problem WITHOUT deleting my texts and photos?
I really need some help with this ASAP. I'm in a long distance relationship that requires the use of my phone quite a bit and its irritating not to be able to really use it.
Thanks
Now, I was going through settings, checking on things. Went to phone settings and then NAM settings, my phone was set to NAM 1. I didn't change it but instead accidentally pressed down on the already selected NAM 1. Now I cant even send messages because it cant authenticate the network! SOMEONE PLEASE HELP ME!
I have tried restarting the phone, removing the battery pack and now I am having more trouble than ever before, since the NAM restart I havent been able to send or receive anything with my phone and I am extremely frustrated at this point. HELP PLEASE!
Edit: Seemed to have fixed the NAM issue, I am no longer getting the network authentication failed message when I try to send messages. I can send again but still can no longer receive...help?goaliegirl34,
Hi there! You this link here to contact us or PM me with your name and number if this is still an issue for you. If you need immediate assistance, please use the link. The forums are primarily peer-to-peer advice and it sounds like you will need our technical support assistance. -
How do I send and receive faxes from f2120
Operating sys win 7 . Dell desktop
Hi @ed4 , and welcome to the HP Forums!
I see you're looking into fax options. From what I understand this printer does not have a fax feature.
For more clarification, I am included the printer specs:
Printer Specifications for HP Deskjet F2100 All-in-One Printer Series
Please let me know if you have any questions. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green. -
Hi Experts
I want to work on SOAP scenarios (Where soap as sender as well receiver)
Can any one help me... with example screen shots on this ...
Pls...provide me end to end (I am very new to SOAP)
like Soap 2 Rfc, Rfc 2 Soap...etc any examples with full details
And one more thing is " In general when we will go for SOAP specific scenario's
What are the real advantages ?
Adv...thanx and points to ALL
Rakesh BRakesh,
Look into these how to guides,
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/befdeb90-0201-0010-059b-f222711d10c0">How to Set Up a Web Service-Related Scenario with SAP XI</a>
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d23cbe11-0d01-0010-5287-873a22024f79">How to Use SOAP Adapter</a>
Blogs~
<a href="/people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2">RFC -> XI -> WebService - A Complete Walkthrough (Part 2)</a>
<a href="/people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009">Troubleshooting - RFC and SOAP scenarios</a>
SOAP allows you to call webservices from XI and also expose your Interface as a webserivce. This way, you leverage and use all advantages of webservices.!
Real Time scenarios invove cases when you have a vendor who have exposed / provide a set of webservices which your organization would like to use.
Regards
Bhavesh
PS :Search on SDN. You will find answers and blogs for the same questions. By searching you are digging yourself and thereby you get to understand things better. -
If I click the go-ahead button, I am warned about not be assured of security danger. This keep happening over and over. It is a pain using email since LION. I went into Keychain Access and tried choosing an Apple certificate, but that is never permanent. Should I just ignore the warning? Will this kind of problem disappear with Mountain Lion? Is there a solution?
What email program are you using?
-
Why does my iPhone 4 keep loosing it's connection to download emails or go onto safari? If I power down the phone and restart it then it will connect but shortly after it will loose the connection and then just shows connecting in email or in safari unable to connect to the Internet
I'm guessing it's more likely a problem with your carrier's 3G network in the area. You shouldn't have to modify any settings for 3G to work consistently on a supported carrier.
You can try turning off 3G data, with will switch over to Edge if it exists. If it does, it will be much slower than 3G, but I suppose faster than 0 is better than 0.
I'd contact your carrier about it. -
Send and receive e-mails to/from only one mailbox
Hello,
i wanted to know is it possible to allow one recipient to send to only one recipient and to receive only e-mails from same recipient ?
Thanks,
JohnHi John,
Great commands from Philip.
We can also create transport rules via EMC.
Found a similar thread for your reference:
Transport Rule allow user to send to only 10 user
http://social.technet.microsoft.com/Forums/en-US/06d88574-d67d-483d-9abe-fe5e3f8bc41b/transport-rule-allow-user-to-send-to-only-10-user
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support
Maybe you are looking for
-
Sharing a 74 GB Iphoto11 file with 3 MACs in the house+an 1TB Time Capsule
Hi. I run the Iphoto 11 and my 74 GB file from my MacBook Pro. But when I am in the office my wife and child cannot work neither import fotos to Iphoto. We have an IMac and a Macbook Air as well. I would like to place the Iphoto file on the our 1TB T
-
i am going CRAZY!!!! I can't stop with the damm double side printing !!! And it's only using the blank ink cartiage and not the color one!!!!! PLEASE HELP ME!!!!!!!
-
I am not able to copy any further to the ipod. I have utilised about 600 MB of space. Still a lot of space left on it. I have restored it. after restoration again it will copy only about 600 mb only. I have changed usb ports, I have re-installed xp,
-
I have a PDF which was created in Adobe InDesign CS4. The document is mostly in English but has some Chinese and Spanish text. I am trying to mark the tags containg the Chinese or Spanish with the appropriate language. In Acrobat Pro 9.1.2, 1. I sele
-
My white 32 gb I phone was stolen of me under threat of weapons and I could not activate find my iPhone application on it twice before it was stolen I still have the box of it and it is serial number and owning number What can I do to get it back or