Problems setting up AirPort Express Base Station

I'm a real newbie at this, so pardon the ignorance in advance haha.
I just bought a new Airport Express base station. I wanted to be able to stream my music via iTunes to my living room. I'm just having problems getting the aiport utility to recognize the base station. I have the base station plugged in and everything. Right now it is flashing the amber light.
This is my set-up. I have a Netgear WGR614 54MBPS wireless G router connected to my broadband modem. From the router I have it connected to my desktop thats running windows xp pro. The network is up and running just fine. I can connect via any laptop or other device with wifi. Now, how do I get my wireless router to pick up the base station? Do I have to wrong idea here or something? haha. thanks in advance!

In the Airport Utility for your Airport Express, you should set the Airport Express in "client" mode. You might have to connect your Airport Express directly to your router with ethernet cable, while doing this. If you are using encryption, make sure that you enter the encryption number onto the express that your router/access point is using. Again, if you plug the Express directly into the router, you should be able to modify the settings quite easily. Once you unplug the express, it will blink orange for awhile (maybe a minute), so wait a bit.
Good luck.

Similar Messages

Airport Express base station disconnects!

I have an odd problem with my Airport Express base station. I have 2 Macs on my home network, and one Windows machine.
Everything is fine and dandy until the Windows machine connects to the internet. Usually a few hours after, the AE disconnects and I have to reset it by unplugging and plugging it back in again.
If I don't use the Windows machine on my home network, my AE works fine for weeks and weeks. Anyone have any idea what might be going on?
Edit: More info from Airport Admin Utility:
Security: WPA2 Personal
Channel: 11
Mode: 802.11 b/g
Distribute IP addresses checked
Share a single IP address (using DHCP and Nat) checked
Closed network + all 3 machines' MAC addresses allowed in Access Control

Closed network + all 3 machines' MAC addresses allowed in Access Control
Disable all that and see if you have better success.
"Closed network" is a useless feature and offers NO security. The network name is still broadcast between the base station and any connected client. Therefore the network name is easily detected.
"Access Control" is feature which is also nearly useless and offers no real security. The MAC address of connected clients can easily be detected and cloned.
If you are using WPA2 or WPA with a non-dictionary password your network is secure. No need in enabling those other features which do nothing to enhance security and cause flaky things to happen.

Steady green light on A1084. Airport Utility 5.6 says set up is complete. Airport Express base station does not appear in the menu bar, so I cannot select it. Is there a fix?

Steady green light on A1084. Mac OS X 10.7.5. IMac. Verizon DSL Actiontec GT704-WGB modem. Airport Utility 5.6 says set up is complete. Airport Express base station does not appear in the menu bar, so I cannot select it and send a signal to airport express to play airtunes through my stereo amplifier. Is there a fix?

I plugged a model A1034 Airport Extreme Base Station into the Verizon DSL Actiontec GT704-WGB modem with an ethernet cable and now the AirPlay icon appears in the Itunes window immediately to the right of the volume control and I can select it and play Airtunes wirelessly through the A1038 Airport Express Base Station in another room connected to a stereo amplifier by a Monster mini-to-RCA left/right audio cable running from the output jack on the A1034 Airport Express Base Station into the CD jacks on the amp. The problem is that I have to select the Apple Network Airport Express Base Station as my network in order to select the Airport Express Base Station when I click the AirPlay icon, which means I have no Internet signal to the Imac. If I select the Airport Extreme Base Station or the Verzion modem as my network, then I have an Internet signal to the Imac, but the Airport Express Base Station is grayed out when I click on the AirPlay icon, so I cannot select the Airport Express Base Station and send tunes to the Airport Express. It would be nice to play Airtunes while simultaneously accessing the Internet. I don't understand your question about what program I am using for which I require AirPlay. I am not learned about computers in general, and even less so about Macs than PCs. I thought the program I was running was Itunes, and there was no separate program to run to use AirPlay for the purpose of sending a signal from the Itunes on the Imac to the A1084 Airport Express base station in a another room, and then out as described above to the stereo amplifier to listen to Itunes music remotely in the other room, without any kind of cable, wire, etc., connecting the Imac to the stereo amplifier. I would guess that the most common use for the A1084 is to play Itunes through a stereo in another room without the need to run wires from the computer to the stereo. I realize it would be easy simply to run a very long mini-to-RCA left/right audio cable across the floor connecting the Imac to the amp without the need to use AirTunes, Airplay or any kind of AirPort, but it would be both unsightly and a tripping hazard.

Apple AirPort Express Base Station with 802.11n - MB321LL/A. How to set it up to my new iMac

Community:
How do you set up an
Apple AirPort Express Base Station with 802.11n - MB321LL/A how do you set up on Mac running on OS X 10.9.4?
Please advise
Fmsalazar

Apple did say it was important.
If the units do not show up in the airport utility then you must set it correctly to link-local.
Steps for OS X Lion or Mountain Lion
This can happen if IPv6 has been disabled. To enable IPv6 for your network interface:
Choose Apple menu () > System Preferences, and then click Network.
If a lock icon appears in the lower-left corner, click it and enter your admin name and password to unlock the pane.
Click your network service (Wi-Fi or Ethernet) in the list, and then click Advanced.
Click the TCP/IP tab.
Choose Link-local only from the Configure IPv6 pop-up menu.
Click OK.
Click Apply.
AirPort base station not seen or "An unexpected error occurred" appears in AirPort Utility 6.3
Apple rep says the same.
Re: Unexpected error when connecting Airport Express A1264 to Airport Utility 6.3.1
I am searching as I saw it in a thread today where a person had issues. (No contribution from me in the thread but found that was the issue).
It is kind of a fail safe.. since auto can end up with any setting.. and it will depend on the setting of ipv6 in the Airport Router if it works properly in the computer.. setting it to the correct value is one step in sorting out problems when people get in a mess.

Airport Express base station problem.....

I am having a problem with my base station and am hoping i can get some help here.
This is my setup
Mac book pro
external HD (where itunes is located)
Epson R260 usb printer.
cable internet with router and modem
What i hope to do:
hook up usb hub to airport base station so i can plug in printer and HD so i can wirelessly print from the printer and play music on itunes from external HD.
i have tried a couple times to set it up and never get it to print.
right now the base station is blinking orange. i have a Ethernet line i can use for the MBP or base station if needed
thanks!!

Unfortunately, not all USB printers are compatible with AirPort base stations. In addition, the AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers.
To see if your printer is compatible, take a look at one of these iFelix Unofficial AirPort Printer Compatibility links, depending on which AirPort base station you have:
o 802.11g AirPort Extreme Base Station (AEBS) or AirPort Express Base Station (AX)
o 802.11n AirPort Extreme Base Station (AEBSn)
If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
Also you can try this Apple Tech Support article to see if it will help: Printer troubleshooting for AirPort Extreme and AirPort Express

I have two airport express base stations that I want to configure on two separate sets of speakers in two separate rooms. How do I do this? Airport Utility only seems to scan one express at a time.

I am currently running a PowerPC G5 imac and have a wired broadband modem via ethernet with airport wireless network turned on, on the G5. I have the computer in the bedroom and have an airport express wired into a mixer that connects to my stereo. I have recently bought another airport express base station to connect to a pair of active monitors in the kitchen. When I try to scan these on Airport Utility version 5.42 I am only managing to scan one base unit at a time. I have plugged them in separately and reset them, they both have firmware updates, however the utility will only read one at once. I have read that you can link base stations to the same WDS. I would like to know how to go about doing this if it will only scan one airport express at a time. I have looked it up on the net and not found anything that is a simple fix. Can anyone help? In Apple Support it says that multiple Base Stations can be used. I would like to get both Apple Airport Express units to be able play airtunes separately or at the same time depending where I am in my flat. I do not need different music in each room. I would like to stream music from the computer to multiple rooms in the flat without having to continually unplug and configure the Base Stations. Has anyone come across such a challenge? Any help would be welcome.

How do I configure the AX to connect to the hub's wireless network? It will only scan one base station Airport Express at a time in the Airport Utility. I think what I am trying to do is use the hub as a router to the two AX's. Is there a specific way to set this up?
To set up the AX to join a wireless network as a "Wireless Client," using the AirPort Utility, either connect to the AX's wireless network or temporarily connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, try these settings:
Launch the AirPort Utility.
Select the AX.
If not already connected to the AX's wireless network, go ahead and switch to it when prompted.
AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless
Wireless Mode: Join a wireless network
Network Name: <type in the network name/SSID of the wireless network that you want to join or select it from the pop-up menu>
Wireless Security: None OR, if you are using security on your wireless network:
Wireless Security: <Select the appropriate level of security for the existing wireless network: WPA/WPA2 Personal | WPA2 Personal>
Password: <enter your wireless network security password>
Verify Password: <re-enter the same security password>
Click Update to write the new settings to the AX.

I want to set up my Airport Express Base Station again but do not remember how. Please walk me thru it.

I am trying to hook my Airport Express Base Station up to be a router again and have forgotten how to do this. Before I had it hooked through the modeum and would like to have it that way again but for some reason the process has completely left my memory. I know it has something to do with the little icon on the top of the computer but not what it has to do with it. Because it is not hooked up I am unable to get my printer to work unless I connect to another wireless that I have but do not want to use all of the time since I have to pay for it and do not have many GB. I am also paying for another that I want to use all of the time (unless necessary to use the other) so It only cost me when I am away from home. Please walk me through the process of hooking the Apple router back up.

All apple routers are setup via Airport Utility.. there is no icon for it in the top menu area.. I think you are confusing the airport network setup (ie the internal wireless card in the Mac) with the airport express setup.. Apple insist on calling everything the same name which makes it more confusing.
Open the airport utility which you find under applications/utilties.
Router setting will depend on what version of the utility you are using.
In version 5 it is under Internet tab and in v6 utility under network. You need to set it to DHCP + NAT.
Download and read the manual for setting up the express if you have forgotten the details.. manuals are always good.. all the manuals are listed at the head of the section. But you are in Time Capsule instead of extreme/express specific area.
https://discussions.apple.com/community/wireless/airport
Manuals link http://support.apple.com/manuals/%23airport
If you want the express as router the modem should be bridged or it should be a pure modem for it to work without Double NAT issues. There is nothing wrong with bridging the Express.. that is not the same as using it in wireless bridge modes.. that is router bridge.
What modem do you have?
I am at a loss to understand the rest.. why the printer is not part of your own network.. and how setting up the airport this way is important. You need to give us specific details if you need more help.
How exactly is the airport setup now?
How do you connect to the modem?
How is the printer connected? What kind of printer?

Airport Express Base Station Setup problem

My new Airport Express Base Station (2nd generation) does not sense the internet using an ethernet cable. The status light is green. I am using a hotel's DSL system in Brazil. When using the same cable, and connecting my laptop directly to the system, it senses the internet just fine, so I know it isn't the cable or the hotel. Does anyone know of compatibility problems with this Airport model?

Does the DSL service require PPPoE for authentication before allowing you Internet access? If so, then the device directly connected to the DSL modem would need to be configured as such.

Airport Utility can no longer see my Airport Express Base Station.

Hi all the problem I have is as follows;
I've set up my Airport Express Base Station some time ago to print wirelessly from my HP Photosmart C4280 and it was working fine.
However recently when I've gone to print a document, even though the printer is working fine and the Airport Express Base Station is showing a green light nothing happens. I've gone into the Airport Utility and its say's it can't see the Airport Express Base Station (even though it still has a green light showing). If I unplug the Airport Express and plug it in again, the Airport Utility can suddenly see it again.
I've successfully gone through the reset process but after a few minutes the Airport Utility can no longer see the Airport Express Base Station which means I can't print a document wirelessly. I've repeated the reset process several times with the same outcome.
Everything was working fine up until recently, has the Airport Express Base Station developed a fault? or is there something I'm not doing.
Any advice would be greatly appreciated.

If you're comfortable resetting all settings, unplug it, hold down the reset button and keep holding it in as you plug it back in - keep holding it for another 10-20s until the amber light flashes
Then, open airport utility, now you should be able to see the device either on-screen or in the upper left under 'other wi-fi devices'

Samsung CLP-300 attached to Airport Express Base Station: Issues

I have found that my Samsung CLP-300 printer, which is connected to my Airport Express Base Station via USB, refuses to print after printing one document. After restarting my Airport Express Base Station, I found that the printer would start printing again, but only one document - afterwards, I required a base station restart before the printer could print again.
Does anybody know how to rid this problem? I would like to be able to print consecutive documents without needing a reboot.

Hi Eric. I've had the same troubles for quite some time. I've had limited success setting the printer up as an IP Printer. Here's a link to another discussion that might help you out. Good luck!
http://discussions.apple.com/thread.jspa?messageID=8804705#8804705

Why have all 3 airport express base stations stopped working, BT have checked and improved line still not working?

Why have all 3 airport express base stations stopped working, other users are on ipads and BT have checked and improved line but I still have an intermittent/no connection?

You must tell us the whole setup.. what is the main router?? How are the express connected to each other?
On ipad it works ok?? But you are on a computer?? MBP early 2011 running Lion?? That doesn't work.. even if you are right next to the main router??
Plugged in by ethernet does it work??
Have you installed a wireless diagnostic program.. ?? Actually Lion has one installed but hidden I believe.
Later version bought it to the surface.
About Wireless Diagnostics
If you do run Lion please install the 5.6 airport utility as it will give you loads more info on how the units are connected.. and link speeds for extend wireless.
How to load 5.6 into later Lion & ML
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
Leave the package open on the desktop so you can see the file. AirportUtility56.pkg
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. If your Mac refuses to run the software, because it wasn’t downloaded from the Apple store, go to security in preferences and allow other software to work.. this is limitation of trade methinks. You can set back later if you like.
Now drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. in finder, open the new directory, drill down.. applications, utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall version 6 (now 6.3 if you updated) so don't try.. and you cannot or should not run them both at the same time.. although I have had no problems when doing so.

Airport Express Base Station doesn't appear in AirPort Admin Utility list

Hi,
After applying the "Security Update 2007-003" I had the following problem and can't solve it:
Now I can't find anymore my Airport Express base station under the list of Base stations in Airport Admin Utility and am also having problems while printing wireless, if the printer goes to sleep mode he doesn't wake up automatically anymore to do the job, every time I have to close it and open it again.
I can't find a solution for this problem, please HELP!
Thanks,
Macuser

"it was downloaded by the software update"
No problem then. Apparently there WAS such an update, but I missed it and it's been deleted from the list of available downloads, as you can clearly see.
There is now a new "Security Update 2007-004" for Tiger, and I think it's safe to assume that this will help correct your problems.
If your problems still exist afterwards, you will want to reset the AirPort Express unit to factory settings and erase all current configuration profiles. Do that by holding in the reset button with a straightened paper clip while plugging the unit into a convenient electrical receptacle. Open the utility "AirPort Setup Assistant" and choose to "Set up a new AirPort Base Station" and proceed. After successful completion, unplug and relocate the AirPort Express to its usual location.

Airport Utility not seeing Airport Express base station

Since I got access to cable internet a few days ago, I've been using my Airport Express base station with no problems on my MacBook. Today I tried to set up my roommate's PC (she has Vista, if that matters) so she can get online. So we downloaded the AE Utility for Windows, then reset both the modem and the AE base about two times, but her computer won't see the Express base at all when it scans.
Any ideas? Do we need to go into her Network preferences on the Control Panel or something? I've been through the manual but it wasn't much help. Sorry this is such a basic question, thanks for all helpful suggestions!

You had everything working properly.
There was no need for her to have Airport Utility on her computer as the Airport Base station was already set up.
Set your system up the way it was and then on her computer, just have her join the network.
Do not use Airport Utility for anything on her computer.

HELP: Airport Express Base Station over PPPoE and Static IP

Hi there,
I recently purchased a Airport Express Base Station after doing some preliminary research as to wether it would work with my Windows XP Machine.
After finally acquiring it today, I have been trying to set it up with ZERO luck so far.
I open the neat package and plug in the wires as mentioned in the manual and get the AE on. I install the AE software from the CD, my computer recognises the wireless network, all going well.
I setup the airport express using the setup assistant for windows and then open the Airport admin utility. Now here is where I come across the first stumbling block.
My ISP provides each end user with LAN connectivity(primitive), what they do is install a router in every apartment complex and then provide internet through LAN connectivity to every apartment. In doing this they assign each users network adapter a static IP alongwith a lock-in for the MAC address for the specific adapter.
So if you have to change network adapters you have to call them, they release the lock temporarily and you can connect using another adapter without issue.
Another thing they also provide is a Username/password for every apartment user to be able to access the internet once connected. I am not a expert but I am guessing that is what they call PPPoE.
Now I have been trying to setup my Airport Express using the admin utlity but I discovered that it is not possible to specify a Static IP and use PPPoE both together.
How do i get this to work now? .. In addition I have a HP 1010 USB laserjet which I would like to share using my AE, I am guessing I can just create a TCPIP Port for this with the IP of the AE and it should work.
Please help, really require to get this working ASAP with 3 windows machines (2 laptops and 1 desktop)
Many thanks

The Airport Admin utility internet TAB reads as follows
Connect Using Ethernet
Configure TCP/IP using Ethernet
Configure Manually
IP Address: 192.168.3.170
Subnet Mask: 255.255.255.0
Router Address: 192.168.1.1
DNS Servers: blank
blank
Domain Name: Blank
WAN Ethernet port: Automatic
The Network Tab reads as follows
Distribute IP Addresses [CHECKED]
Share a Single IP Address (using DHCP & NAT) [CHECKED]
Use 10.0.1.1/24 addressing [used option]
No other options checked on this tab.
The IPCONFIG reveals the following
===========================================================
C:\Documents and Settings\TAPAN>ipconfig
Windows IP Configuration
Ethernet adapter Wireless Network Connection:
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 10.0.1.3
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 10.0.1.1
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 192.168.3.170
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
==========================================================
Ethernet shows up here because I am using the internet on my computer directly right now.
But the AE is connected and printer and Airtunes is working fine. It still flashes Amber though.
Any other details you require to further analyse the problem? .. I have tried various combinations of basic IP settings. Resets to the AE, restarts to the Computer already. But I am willing to follow any additional instructions you might have for me and provide you any other information you might require.
Many thanks, You should realise that your continuing support is very encouraging and means a lot to me.

Hey, I have a AirPort Express Base Station ( 2nd Generation ), and I wanted to ask that if I join my network at home with the Express Station, will it still run the 2.5 GHz and the 5.0 GHz?

Okay, well I have just bought a AirPort Express Base Station ( 2nd Generation ) and I'm new to it, but I wanted to ask that if it join's a network you have setup at home, will it still run with the 2.4 GHz and the 5.0 GHz.

The AirPort Express will "extend" both the 2.4 GHz and 5 GHz networks and provide more wireless signal coverage when it is connected to another Apple AirPort router and configured correctly.
The AirPort Express cannot provide more wireless coverage though, if you are trying to connect it to another 3rd party wireless router using wireless only.
It should be possible to set up the Express to provide more signal coverage if you connect it back to the main router using a wired Ethernet connection or using Ethernet powerline adapters.

Problems setting up AirPort Express Base Station

Similar Messages

Maybe you are looking for