Problems setting up Tomcat with RoboHelp Server V8

Hi,
My Systems Administrator is trying to set up RoboHelp Server version 8 for me. he has been following the Adobe Installation guide and has got as far as page 10 where it tells him to install and configure IIS and TomCat, at this point he says he does not understand what he should be doing. He has not installed TomCat before and it is telling him to configure the tomcat directory and although he has tried using what it says it comes up with an error the directory does not exist.
He is using:
Windows 2008 Server Standard
IIS 7.0
TomCat 6.0.20
SQL Server 2008 express SP1 - this is the latest version the adobe instructions says RooHelp Server works with SQL Server 2008 but does not mention express not sure if that could be a problem?
MS Report Viewer 2008 SP1
Java V6 Update 12
He says the installation guide talks about a directory with Win32 in it which does not appear on his machine its a 64 bit machine.
Please can someone give me some instructions on how to set up the TomCat part - I have looked but the troubleshooting that adobe has does not seem to be for Windows 2008 only Vista and XP and even then it says nothing about setting up TomCat
Thanks in advance
Erika

Erika
Not an area I can help with but try this post. http://forums.adobe.com/thread/204737?tstart=0
Also look through the forum. There are some detailed posts on this.
Finally take a look at http://notcolin.wordpress.com. There are some relevant blogs there.
See www.grainge.org for RoboHelp and Authoring tips

Similar Messages

How to set up SAPconnect with email server

Hi,
Does any one know <b>how to set up SAPconnect with email server</b>
We are using workflow and when it fails it we are sending the notification mail to the user on his company mail id, i.e. [email protected]
This is working in the current production system. We are doing the new development which will replace the current production system. The existing Basis team does not know how it was setup in production system and how to set it up in the new system.
When we send any mail notification from workflow we can see the mail in SCOT transaction but it is not received at the specified mail address.
Can any one provide the configuration steps or any document for this.
Thanks in advance..
Pratik

Hi Pratik,
Check the following link:-
/people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
http://help.sap.com/saphelp_nw04/helpdata/en/2b/d925bf4b8a11d1894c0000e8323c4f/frameset.htm
these link will help u to config SMTP.
And one more thing u have to do..
Go to SE11 n open Table sxnodes in change mode.
And change F_ESMTP field to false i.e. BLANK for the Field NODE = SMTP.
Hope this will work For U.
Regards
Sachin Dhingra

Problem setting up WDS with MSI RG54GS2 & Motorola WR850g

Problem setting up WDS with WR850g & MSI RG54GS2
Hi,
I'm trying to bridge 2 routers: Motorola WR850g & MSI RG54GS2 .
I set the MSI as the main router (it works better for me as a router than the Moto), and the Moto is the repeater. I have set it up exactly as the guide on Broadbandreports.com for the Motorola , and on Tom's Networking http://www.tomsnetworking.com/2004/04/14/how_to_wds_bridge/
The Moto sees the MAC of the MSI (Status is UP), the MSI doesn't have a page that shows WDS MACs . I know the routers are connected because when I connect a laptop to the Moto wireless network, it gets an IP (and the DHCP on the Moto is disabled) and the default gateway of the connection is the IP of the main (MSI) router.
The problem is I can't surf anywhere. I can't even ping the MSI router - which should be possible if the WDS works properly.The Moto Wireless Bridge Operation is set properly to Access Point/Wireless Bridge .
Can anyone solve this?
Thanks.

David, welcome to the discussions.
Are you refering to Airport Extreme Setup as the Extreme base.
Or are you using a 3rd party Router as your primary Base, or the Express as the primary base.
Read the supplied link, Not all 3rd party routers are WDS compatible.
http://discussions.apple.com/thread.jspa?messageID=2785566
Who is you Internet Service Provider?
What brand and Model Modem did they furnish?
Are you using Dial-Up...DSL...or Cable?
http://docs.info.apple.com/article.html?artnum=303595
See if there is any help from this link.
http://discussions.apple.com/thread.jspa?messageID=607414
Cheers Don

Problems setting up WNA with OAS 10.1.2.0.2 and Windows 2008

Hi,
I am trying to set up WNA with an OAS 10.1.2.0.2 in a RHEL 4 platform. I have been able to configure Synchronization and Windows External Authentication following these steps:
http://download.oracle.com/docs/cd/B14099_19/idmanage.1012/b14085/odip_actdir003.htm#i1010999
I have also tried to configure WNA without success with those steps.
The scenario is here:
* OAS 10.1.2.0.2 infra in a RHEL 4
* Windows 2008 SP1 (only i use AD from it)
* Windows XP (client) that should be able to log in without problems when WNA is configured
How can make it work? I haven´t find any useful documentation
Thanks,
Max

Check these out:
http://www.freeoraclehelp.com/2011/09/oid-integration-with-ms-active.html
http://www.freeoraclehelp.com/2011/09/enable-ssl-for-oid-instance-of-oracle.html
http://www.freeoraclehelp.com/2011/09/oracle-password-filter-to-sync.html

Problem in using MDB with Foregin Server

Hi, anyone can help me? I am currently using Weblogic 11g, 10.3.5, development edition locally in my desktop.
My scenario is I have to using an MDB to monitor a queue in a Tibco EMS queue (lookup with LDAP server).
I create a JMS Server, and a JMS module with a Foreign Server configured. In the module, I specified "JNDI Initial Connection Factory", "JNDI Connection URL", "JNDI Credentirals", etc.
In the module, I have a Queue with local jndi name: jms/MyReqQueue and a Connection Factory, jms/MyReqCF (with password setup).
I created an MDB with annotations, and packaged into a EAR
@MessageDestinationConfiguration(connectionFactoryJNDIName = "jms/MyReqCF")
@MessageDriven(
          activationConfig = {
                    @ActivationConfigProperty(propertyName = "destinationType", propertyValue = "javax.jms.Queue"),
                    @ActivationConfigProperty(propertyName = "connectionFactoryJndiName", propertyValue = "jms/MyReqQueue")
          mappedName = "jms/MyReqQueue")
public class FortressOrderProcMDBean implements MessageListener {
I created a testing program, which create an initial context, connection factory, queue myself to the weblogic server using my local jndi names, then i can receive mesages from the queue properly, so the JMS Foreign Server should work fine.
However, I got the foilowing error withn deploying the MDB.
[EJB:011012]The JMS connection factory with the JNDI name: weblogic.jms.MessageDrivenBeanConnectionFactory could not be found. Please ensure that the JNDI name
in the weblogic-ejb-jar.xml or corresponding annotation is correct, and the JMSconnection factory has been deployed.
javax.naming.NameNotFoundException: [LDAP: error code 32 - No Such Object]; remaining name 'ou=weblogic.jms.MessageDrivenBeanConnectionFactory' NestedException
Message is :[LDAP: error code 32 - No Such Object]>
Thanks

Your annotated MDB does not seem to be correct. The error indicates that the connection factory jndi name of the MDB was not set correctly.
Please refer to the following doc for an sample.
http://download.oracle.com/docs/cd/E17904_01/web.1111/e15493/annotations.htm#sthref25

How to use JDBC to connect Tomcat with database server?(Urgent!)

I try to deploy the tomcat and make it connect with databaser server.
I am using mysql connector J 3.0. I added the CLASSPATH of mysql-connector-java-3.0.7-stable-bin.jar in the tomcat.sh .
I also add the web application in server.xml.
When I start tomcat, I can see using Classpath including mysql-connector-java-3.0.7-stable-bin.jar .
But when i browse my jsp including the jdbc, wait for a while, I get a message as following: Timeout on server localhost. My web server and database server is same computer.
Could you tell me what's wrong?

Did you check to see that the MySQL database was indeed up and running, and accepting connections when you started Tomcat? Did you make sure that your firewall permits connections to the database?
Timeout errors generally occur when you send a request to a server and the server does nothing with it - i.e., it doesn't respond to it in any way. Most firewalls are configured this way. If I telnet to your machine and I get "connection refused", I know your machine exists and I can try hacking into it. If I telnet and get nothing at all, then I will either assume either there's no actual machine at that address or it's unresponsive.

Problems using TFS 2008 with RoboHelp 11?

Adobe has not been able to resolve our company's connection problem with SharePoint thus far.
We do know that we can use TFS 2008 with RoboHelp because they have done that in the past. We are on RH11.
We need to know...Has anyone experienced any problems with using TFS 2008 with RH11? If so, what kind of problem(s)?

I've used TFS 2008/2010/2012 with RoboHelp without problems so far. You will always get the check in dialog, but that is the way it works, not a problem. This will become annoying when you are relocating lots of topics, since you will have to check in files a lot during these operations. But otherwise it works perfect in my experience.
As long as you make sure you have the 32 bit MSSCCI provider for the correct TFS version (MSSCCI 2008 for TFS 2008), you should be fine.

Step by step to set up tomcat with mysql

hi i'm new to these things, well i went through the forum , there are load of info but no1 has explain how to set up (step by step) tomcat with mysql using jdbc driver ( also i'll use jsp pages to get info from the database.)
thx alot.

Hiya,
Best way would be to read the README.doc that you get after the installation on the sysetm. Becuase this provided you with the exact info. pertianing to the sysetm etc that you have and also visit this website:
http://www.experts-exchange.com/Programming/Programming_Languages/Java/Q_20148108.html
It gives u a step by step guide to set-up and some sample codes also to test etc.
Happy Javaing, Cheers

Problems using Outlook 2013 with Exchange Server Small Business Server 2003

Hello,
We have just upgraded our Office suite from Office 2007 Pro to Office 2013 Pro. When I try to configure Outlook 2013 to connect to Exchange Server 6.5 (SMS 2003) I get an error "Outlook 2013 being blocked by current version of Exchange Server".
Outlook 2013 at present is not communicating with Exchange server 6.5
Are there any fixes I have to install on our SMS 2003 server to allow Outlook 2013 to work with SMS 2003 Exchange Server?
Any configuration changes I need to make? Any help is appreciated.
Thx
John G.
John Grace

Hi
Outlook 2013 is not supported with exchange 2003:
http://technet.microsoft.com/en-us/library/ee624351.aspx#section10
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Problems setting up WDS with AE

I recently had some problems with my home network and performed a hard reset on both of my AE base stations in order to reconfigure the network. I am trying to set up a WDS network with the two AE's (one being connected to the internet and the other serving as a remote to extend the range and use AirTunes function). When using Airport Utility and going through the setup process, I set up the primary AE with the connection to the internet. I am then using Airport Utility to try and configure the second AE to join the main network, but AU is not allowing the remote AE to connect/join the primary network. I keep getting an error message saying that the Apple wireless device could not join the WDS network and that I should close Airport Utility and try again. I have tried this a number of times, as well as performing more hard resets of both AE's and nothing seems to be working - any suggestions??
This is the first time I have ever had this problem using AU. In past versions of the program this has always worked setting up the network automatically, but does not seem to be working this time. Any suggestions would be helpful.
Thanks,
JB

You would get better responses if you posted in the airport section of the forum.
http://discussions.apple.com/category.jspa?categoryID=140

Problems setting up WDS with old AX and new AEBS

Hi all,
after buying a new AEBS last week, I want to put my old AX back into service. Here's what I have planned:
The cable modem sits in the living room near my stereo. The AX should connect to the cable modem and the stereo and be the main station in a WDS network with the AEBS. The AEBS will be in my study as a remote station to the AX.
Sounds trivial, but apparently it isn't I have spent the evening setting up the two base stations again and again. For some reason, the Airport Utility cannot see both stations at once as soon as they are configured. The AEBS won't find the AX even though the MAC address is correct.
I tried with and without WPA/WPA2, but I cannot figure out what's wrong
Could someone please give me a step by step guide of what to do? I am quite desperate by now...
Cheers from Switzerland
Daniel

Well, what can I say... Of course, I could not give up
Finally I got it to work. For future reference, here's how:
I first set up the AEBS to create a network, then used the Wizard of the Airport Utilitiy to add the AX as a WDS-device (it sets up the whole WDS automatically). Then I flipped the settings - set the AX to be main and the AEBS to be the remote.
I also had to adapt the Internet-Settings. Both base stations were set to bridge-mode, which doesn't work in my case because I only get two IPs from my ISP. So, I set the AX (the main) to share an internet connection and get its IP by DHCP. The AEBS on the other hand needed to get an IP manually (outside of the address space of the DHCP server created by the AX, but within its subnet).
After that it all worked - even AirTunes The AEBS now sits on my desk and the AX provides internet from the living room.
Cheers,
Daniel

Problem:100 % cpu usage with tcp server dll

Hello,
I am trying to write a dll with labwindows/cvi that allows me to create a TCP Server. This dll is integrated in labview.I created this Dll with example provides by Labwindows/cvi(rtserver.dll).
Description of my problem: when i execute this dll in a "While Loop" in labview,the TCp server wait a connection and 100% cpu usage occurs. However when a client is connect to the server,the CPU is normaly used because the program stop when he meets the timeout of the tcpread() function. I would like to know how i could limit CPU usage when the server is awaiting a client in the labview "While loop".
I know I could use a DELAY() to limit Cpu usage ,but I would like to know if there are any others solutions.
thank you.

i dont know your exact application, but i generally use Q to transfer data to TCP loop in my prgram it helps me in two ways.
1. it automatically restricts the iteration when ther is no data (Less CPU Usage, Less Unnecessary Trafic)
2. Q can eliminate problems arising due to non synchronization of loop
Tushar Jambhekar
[email protected]
Jambhekar Automation Solutions
LabVIEW Consultancy, LabVIEW Training
Rent a LabVIEW Developer, My Blog

Problem setting file extension with jspc

I'm using xhtml which it appears the Jasper compiler (Tomcat 5.5) can't handle. It seems to only recognize files with the jsp and jspx extensions. Is there a way (either on the command line or via the Ant task) to set this? What is the proper way of pre-compiling these pages?
Thanks in advance.
Scott Czadzeck

Hi,
You can restrict them to save in any other format by making the check.
Simply add listner for the Event.OPEN on the fileReference and inside this check for your allowed extension,if the extension is not what you want then
simply right a line there like:-
fileReference.cancel();
And addtionally you can give any alert that your file should be of that particular extension.
with Regards,
Shardul

Problem setting up Wireless with WAP54G

I am having trouble setting up my wireless network with my WAP54G access point. I have used this same router successfully before but now on my new network it gives me trouble.
I did a reset on my Access Point, Then the default setting is with a static IP address. I can just connect with the access point (wireless) with no problem. But when connected to the modem it doesn't give me internet...
Reading the manual of the modem it tells me that any router connected to the modem should be set to DHCP. So when I put the settings on my access point to DHCP (and change them on the network settings of my laptop) I cannot connect with the Accesspoint anymore..
Can anyone help me? am I just doing something stupid here?

Hi sdedmer. What is the make and model of your modem? Is it a modem-router-in-one or a gateway? If so, you may need to enable the DHCP of the device so it can provide IP addresses for multiple devices to connect wirelessly. The WAG54G is an access point. It can only provide wireless and Internet access to one device at a time. For this, you may need to purchase a wireless router if you want to connect multiple devices (wired or wireless) and extend the wireless range using the WAG54G.
For more information about access points and routers, check this link out: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=b22772feb0f348f98a9c5d13e8469fca_192.xml&pid=80&re...
Information. Share it to learn.
Help, learn and share

I am having problems setting up iCloud with Outlook 2007.

I was able to setup the email with Outlook, but every time I try to setup the contacts. I get the following error:
your setup could not be started because of unexpected error
This error does not occur immediately, but occurs after several steps of downloading and uploading.
If I hit the report button, it hangs. So I hit cancel after that in my retries. I am on Windows 2007 (32-bit).

You need to leave more information like what is the ios5 device. I following instructions accidently set up two iclouds and then I couldn't get the contacts in. My mobileme email isn't going to work anymore because I set up an icloud using my store apple ID. Apparently the term apple ID can refer to any apple product ID that you make up not the one you use in the store. So you need to leave more infor on what is your problem to figure out how to help.
GR

Problems setting up Tomcat with RoboHelp Server V8

Similar Messages

Maybe you are looking for