Problems setting up VOIP calls on Nokia E71

Question

can anyone help on how to set up VOIP calls correctly on E71? what should I put in for Public user name? and then username and password??
please help 

Answer 1

Hi David,
Why not apply a access list to filter incoming traffic into the SG300 switch such as, via command line or GUI.
Here is an example below, by no means complete, just an example
Just remember,  we are using reverse masking in the ACE;
config
ip access-list extended restrictGuest
deny ip 192.168.30.0 0.0.0.255 192.168.20.0 0.0.0.255
deny tcp 192.168.30.0 0.0.0.255 any 192.168.30.1 0.0.0.0 www
deny tcp 192.168.30.0 0.0.0.255 any 192.168.30.1 0.0.0.0 telnet
deny ip 192.168.30.0 0.0.0.255 192.168.10.0 0.0.0.255
permit ip any any
exit
interface gigabitethernet1
service-acl input restrictGuest
exit
Don't forget to save the configuration with the following command and respond to the prompt.
write
or do it via the GUI method
Step 1.  Create a ACL name
step 2, Add the port based ACE which is the filter list,.
step 3.   Apply or bind the list to a port so that the port can look at and filter pattern matches for traffic ingressing into the switch.  I have given you an example of a ACE list above, you can be more creative in what you deny.
step 4. Now add or copy the entry to other switch ports.
Remember to save your configuration change.
Hope this helps.
regards Dave