Problems setting up WNA with OAS 10.1.2.0.2 and Windows 2008

Hi,
I am trying to set up WNA with an OAS 10.1.2.0.2 in a RHEL 4 platform. I have been able to configure Synchronization and Windows External Authentication following these steps:
http://download.oracle.com/docs/cd/B14099_19/idmanage.1012/b14085/odip_actdir003.htm#i1010999
I have also tried to configure WNA without success with those steps.
The scenario is here:
* OAS 10.1.2.0.2 infra in a RHEL 4
* Windows 2008 SP1 (only i use AD from it)
* Windows XP (client) that should be able to log in without problems when WNA is configured
How can make it work? I haven´t find any useful documentation
Thanks,
Max

Check these out:
http://www.freeoraclehelp.com/2011/09/oid-integration-with-ms-active.html
http://www.freeoraclehelp.com/2011/09/enable-ssl-for-oid-instance-of-oracle.html
http://www.freeoraclehelp.com/2011/09/oracle-password-filter-to-sync.html

Similar Messages

Problem setting up WDS with MSI RG54GS2 & Motorola WR850g

Problem setting up WDS with WR850g & MSI RG54GS2
Hi,
I'm trying to bridge 2 routers: Motorola WR850g & MSI RG54GS2 .
I set the MSI as the main router (it works better for me as a router than the Moto), and the Moto is the repeater. I have set it up exactly as the guide on Broadbandreports.com for the Motorola , and on Tom's Networking http://www.tomsnetworking.com/2004/04/14/how_to_wds_bridge/
The Moto sees the MAC of the MSI (Status is UP), the MSI doesn't have a page that shows WDS MACs . I know the routers are connected because when I connect a laptop to the Moto wireless network, it gets an IP (and the DHCP on the Moto is disabled) and the default gateway of the connection is the IP of the main (MSI) router.
The problem is I can't surf anywhere. I can't even ping the MSI router - which should be possible if the WDS works properly.The Moto Wireless Bridge Operation is set properly to Access Point/Wireless Bridge .
Can anyone solve this?
Thanks.

David, welcome to the discussions.
Are you refering to Airport Extreme Setup as the Extreme base.
Or are you using a 3rd party Router as your primary Base, or the Express as the primary base.
Read the supplied link, Not all 3rd party routers are WDS compatible.
http://discussions.apple.com/thread.jspa?messageID=2785566
Who is you Internet Service Provider?
What brand and Model Modem did they furnish?
Are you using Dial-Up...DSL...or Cable?
http://docs.info.apple.com/article.html?artnum=303595
See if there is any help from this link.
http://discussions.apple.com/thread.jspa?messageID=607414
Cheers Don

I have a 4s with the latest 6.0.1 update and windows 7 with iTunes 11. When I connect the phone, windows can see but iTunes doesn't. Have tried re-installs and re-starts. Anybody else have this problem

I have a 4s with the latest 6.0.1 update and windows 7 with iTunes 11. When I connect the phone, windows can see but iTunes doesn't. Have tried re-installs and re-starts. Anybody else have this problem?

Did you go through all the options?
Also this:
Also, third-party security software may conflict with iOS devices connecting to iTunes. Follow this article to troubleshoot issues that may be caused by your security software. After resolving any issues you may have with your security software, you may need to try the steps in this article again.

Is Firefox 4.0 now compatible with ZoneAlarm Browser 1.5.260.0 and Windows Vista Home Premium, 64Bit System, Service Pack 2?

Is Firefox 4.0 now compatible with ZoneAlarm Browser 1.5.260.0 and Windows Vista Home Premium, 64Bit System, Service Pack 2? Earlier when checking for updates there were compatibility issues. Were these issues resolved to allow me secure operation with Firefox 4.0?

I also am a zone alarm user and was not to happy about the issue with 4.0
I use sky .fm for music and was not happy when it would not play. required update to latest flash,which didn't work no matter what. even the suggestion in another thread.

Problems setting up Tomcat with RoboHelp Server V8

Hi,
My Systems Administrator is trying to set up RoboHelp Server version 8 for me. he has been following the Adobe Installation guide and has got as far as page 10 where it tells him to install and configure IIS and TomCat, at this point he says he does not understand what he should be doing. He has not installed TomCat before and it is telling him to configure the tomcat directory and although he has tried using what it says it comes up with an error the directory does not exist.
He is using:
Windows 2008 Server Standard
IIS 7.0
TomCat 6.0.20
SQL Server 2008 express SP1 - this is the latest version the adobe instructions says RooHelp Server works with SQL Server 2008 but does not mention express not sure if that could be a problem?
MS Report Viewer 2008 SP1
Java V6 Update 12
He says the installation guide talks about a directory with Win32 in it which does not appear on his machine its a 64 bit machine.
Please can someone give me some instructions on how to set up the TomCat part - I have looked but the troubleshooting that adobe has does not seem to be for Windows 2008 only Vista and XP and even then it says nothing about setting up TomCat
Thanks in advance
Erika

Erika
Not an area I can help with but try this post. http://forums.adobe.com/thread/204737?tstart=0
Also look through the forum. There are some detailed posts on this.
Finally take a look at http://notcolin.wordpress.com. There are some relevant blogs there.
See www.grainge.org for RoboHelp and Authoring tips

Problems setting up WDS with old AX and new AEBS

Hi all,
after buying a new AEBS last week, I want to put my old AX back into service. Here's what I have planned:
The cable modem sits in the living room near my stereo. The AX should connect to the cable modem and the stereo and be the main station in a WDS network with the AEBS. The AEBS will be in my study as a remote station to the AX.
Sounds trivial, but apparently it isn't I have spent the evening setting up the two base stations again and again. For some reason, the Airport Utility cannot see both stations at once as soon as they are configured. The AEBS won't find the AX even though the MAC address is correct.
I tried with and without WPA/WPA2, but I cannot figure out what's wrong
Could someone please give me a step by step guide of what to do? I am quite desperate by now...
Cheers from Switzerland
Daniel

Well, what can I say... Of course, I could not give up
Finally I got it to work. For future reference, here's how:
I first set up the AEBS to create a network, then used the Wizard of the Airport Utilitiy to add the AX as a WDS-device (it sets up the whole WDS automatically). Then I flipped the settings - set the AX to be main and the AEBS to be the remote.
I also had to adapt the Internet-Settings. Both base stations were set to bridge-mode, which doesn't work in my case because I only get two IPs from my ISP. So, I set the AX (the main) to share an internet connection and get its IP by DHCP. The AEBS on the other hand needed to get an IP manually (outside of the address space of the DHCP server created by the AX, but within its subnet).
After that it all worked - even AirTunes The AEBS now sits on my desk and the AX provides internet from the living room.
Cheers,
Daniel

Problem with syncing iPod ... Itunes and windows show errors... itunes 7...

hey guys... since I upgraded to itunes7 my ipod (4th gen click wheel) doesnt sync poperly! it all began when I was syncing the ipod and my screen just froze a few secs after connecing the ipod! I had to restart the computer and reset my ipod... from that time had alot of trouble!
first the screen froze immediately when I connected my ipod with the pc and later when i had formatted it with windows several times and resetted it a million times with itunes7, itunes and windows show errors (error (-124) while syncing and everything stops! I've just spent nearly two nights on that and really hope that my ipod didn't break just because of itunes7! to stay in proper english and not get that angry in letters that I am in mind--- please so help me... my ipod is everything and im a music junkey! by the way... itunes itself works perfectly... if i not sync! how peculiar that getting back to itunes6 is impossible...i tried it... does it hav a spec reason, hah!
IBM, Pentium3 (666MHZ), FW(desire to fire), Ipod Click Wheel Windows XP 30cm

I tried formatting the ipod with windows! in the end of it windows says that it was not able to format the drive properly. then I click ok, open itunes, restore the ipod, try to sync again and have the problem that after a while the whole thing freezes... no more errors....just from the moment i disconnect the ipod manually from the cable, everything gets back to normal life again! I do not know what to do! do you guys think, my computer is too old or maybe my ipod's broke???
I'm despairing people...never had problems like that until itunes7! I tried as well to close all the other working programs with the task manager... doesn't change it!
Thx for the help!
Christopher
IBM, Pentium3, FW(desire to fire?)...doesn't really matter Windows XP

Problem adding sales order with freight since 8.8 pl 20 (and 8.81 pl 0)

Dear All,
Since the upgrade to 8.8 patch 20 I have a problem with adding a sales orders with freight (expensecode 1 does exist!) through the XML import of (the same problem with 8.81 pl 0).
This is the XML:
<BOM>
     <BO>
          <Documents>
               <row>
                    <DocType>dDocument_Items</DocType>
                    <DocDate>20110328</DocDate>
                    <DocDueDate>20110328</DocDueDate>
                    <CardCode>INT_C_PenS</CardCode>
               </row>
          </Documents>
          <Document_Lines>
               <row>
                    <ItemCode>10000024</ItemCode>
                    <ItemDescription>Afvalbak CONSTRUCTO 50</ItemDescription>
                    <Quantity>4.00</Quantity>
                    <ShipDate>20110328</ShipDate>
                    <DiscountPercent>20.00</DiscountPercent>
                    <UnitPrice>528.00</UnitPrice>
                    <LineStatus>bost_Open</LineStatus>
                    <LineType>dlt_Regular</LineType>
               </row>
          </Document_Lines>
          <DocumentsAdditionalExpenses>
               <row>
                    <ExpenseCode>1</ExpenseCode>
                    <LineTotal>64.00</LineTotal>
               </row>
          </DocumentsAdditionalExpenses>
     </BO>
</BOM>
When the DocumentsAdditionalExpeses part is deleted then there is no problem.
The error with the DocumentsAdditionalExpeses is 'Internal error accured'.
Can anyone confirm that this not is working through XML import (DTW works) or is there a solution?
Thanks and best regards,
Wim Kleinsman

Hi,
Try this one.
<BOM>
<BO>
<Documents>
<row>
<DocType>dDocument_Items</DocType>
<DocDate>20110328</DocDate>
<DocDueDate>20110328</DocDueDate>
<CardCode>INT_C_PenS</CardCode>
</row>
</Documents>
<Document_Lines>
<row>
<ItemCode>10000024</ItemCode>
<ItemDescription>Afvalbak CONSTRUCTO 50</ItemDescription>
<Quantity>4.00</Quantity>
<ShipDate>20110328</ShipDate>
<DiscountPercent>20.00</DiscountPercent>
<UnitPrice>528.00</UnitPrice>
<LineStatus>bost_Open</LineStatus>
<LineType>dlt_Regular</LineType>
<ExpenseCode>1</ExpenseCode>
<LineTotal>64.00</LineTotal>
</row>
</BO>
</BOM>
Regards,
Siva

Problem with update SCCM client to Sp1 CU3 on Windows 2008 server

Hi all,
I have problem with update SCCM client on Windows 2008 Server to 2012 Sp1 CU3. I have sent to deployment package with update (SP1 Cumulative Update 3 - server update) on four servers and after few minutes I have got in Monitoring\Deployment details four
this same errors in "Asset Details":
USER Message ID
Status type Description
NT\AUTHORITY\SYSTEM 1006
Error 3003
I love that types of error... which is har to find answer on google :-( I have tried but I haven't find any constructive :-( Did you met with something similar? Which log I should check (sorry - I'm still noob in SCCM2012) to update actual SCCM Client SP1
(5.00.7804.1000) to SP1 CU3 (5.00.7804.1400)?
Thank you.

I see in fodler with CU3 updates, are four packages:
- SP1 Cumulative update 3 - x64 client update
- SP1 Cumulative update 3 - x86 client update
- SP1 Cumulative update 3 - server update
- SP1 Cumulative update 3 - console update
It will be stupid but... maybe I should deploy x64 client update package?

I can't remember the password I used to set up icloud nor the email I used to set it up with. I have my apple ID and email for that account.

I recently had to do a factory restore on my iphone 4s. Upon trying to set up my phone again I am being asked to sign into my icloud account. I can't remember the password or the email I used to set it up. I know my Apple ID, password and email for that account, but that doesn't allow me to get back into my phone. I can't reset the icloud password because I can't remember the email I used. Any ideas on what I can do please ?

Hi, Fugalltadowivu.
Thank you for visiting Apple Support Communities.
This sounds like Activation Lock has been enabled on this device. Here is some helpful information regarding this feature.
Find My iPhone Activation Lock
http://support.apple.com/en-us/HT201365
If you purchased your device from a third party, this device may be locked to their Apple ID. If this is the case you may want to check out the article below.
Find My iPhone Activation Lock: Removing a device from a previous owner’s account
http://support.apple.com/en-us/HT201441
Cheers,
Jason H.

Problems with RH 8 and Windows 2008 64-bit servers with IIS7?

I have been informed that my company's servers are being upgraded to Windows 2008 64-bit servers with IIS7, from Windows 2003 & IIS6. Probably will be online in April 2011.
I have a project created using WebHelp, RoboHelp HTML v5. I have RoboHelp HTML v8 (haven't had a chance to use it yet). We are currently using IE7 on XP. Does anyone have any info on issues with RoboHelp v8 WebHelp projects running on Windows 2008 64-bit servers & IIS7 that I need to be concerned about? I thought I should convert the project developed using RH 5 to and RH 8 project, then FTP it to the new server when it becomes available.
Any helpful info would be much appreciated.
Thanks,
Alden

Acrobat 8 is not certified for Win7, particularly the x64 version. If you got the installation to go, the first step is to update AA8 to at least AA8.2. The x64 with XP required at least AA8.2 and I suspect that has not changed. I would suggest updating to the latest, either from the help menu (until no more updates are available) or by downloading the updates from the adobe.com>downloads page. For the latter, download ALL updates after your current version and install them in ORDER. They are not cummulative in most cases. You only need to reboot after the final update. The updates may get you going. If not, you may simply have to upgrade to AA9 or search for what others have been able to do in your situation.

Problems setting up WDS with AE

I recently had some problems with my home network and performed a hard reset on both of my AE base stations in order to reconfigure the network. I am trying to set up a WDS network with the two AE's (one being connected to the internet and the other serving as a remote to extend the range and use AirTunes function). When using Airport Utility and going through the setup process, I set up the primary AE with the connection to the internet. I am then using Airport Utility to try and configure the second AE to join the main network, but AU is not allowing the remote AE to connect/join the primary network. I keep getting an error message saying that the Apple wireless device could not join the WDS network and that I should close Airport Utility and try again. I have tried this a number of times, as well as performing more hard resets of both AE's and nothing seems to be working - any suggestions??
This is the first time I have ever had this problem using AU. In past versions of the program this has always worked setting up the network automatically, but does not seem to be working this time. Any suggestions would be helpful.
Thanks,
JB

You would get better responses if you posted in the airport section of the forum.
http://discussions.apple.com/category.jspa?categoryID=140

Problem setting up Wireless with WAP54G

I am having trouble setting up my wireless network with my WAP54G access point. I have used this same router successfully before but now on my new network it gives me trouble.
I did a reset on my Access Point, Then the default setting is with a static IP address. I can just connect with the access point (wireless) with no problem. But when connected to the modem it doesn't give me internet...
Reading the manual of the modem it tells me that any router connected to the modem should be set to DHCP. So when I put the settings on my access point to DHCP (and change them on the network settings of my laptop) I cannot connect with the Accesspoint anymore..
Can anyone help me? am I just doing something stupid here?

Hi sdedmer. What is the make and model of your modem? Is it a modem-router-in-one or a gateway? If so, you may need to enable the DHCP of the device so it can provide IP addresses for multiple devices to connect wirelessly. The WAG54G is an access point. It can only provide wireless and Internet access to one device at a time. For this, you may need to purchase a wireless router if you want to connect multiple devices (wired or wireless) and extend the wireless range using the WAG54G.
For more information about access points and routers, check this link out: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=b22772feb0f348f98a9c5d13e8469fca_192.xml&pid=80&re...
Information. Share it to learn.
Help, learn and share

I am having problems setting up iCloud with Outlook 2007.

I was able to setup the email with Outlook, but every time I try to setup the contacts. I get the following error:
your setup could not be started because of unexpected error
This error does not occur immediately, but occurs after several steps of downloading and uploading.
If I hit the report button, it hangs. So I hit cancel after that in my retries. I am on Windows 2007 (32-bit).

You need to leave more information like what is the ios5 device. I following instructions accidently set up two iclouds and then I couldn't get the contacts in. My mobileme email isn't going to work anymore because I set up an icloud using my store apple ID. Apparently the term apple ID can refer to any apple product ID that you make up not the one you use in the store. So you need to leave more infor on what is your problem to figure out how to help.
GR

Problems setting Inhibit Outputs with UMI

I am using a 3rd party stepper drive with a PCI7334 and 7764 UMI. The Step, Dir and Enable inputs on the drive are opto isolated. I have tied the -ve terminal of each to Ground and the +ve terminal to +5V though a 390ohm resistor and to the corresponding connection on the UMI.
I setup the axes inhibit output in software to be Inverting, the switch on the UMI is set to Active Low inhibit outputs and the Drives are Active closed (need to have a potential difference across them to be enabled).
My third axis must be enabled the opposite way around. But when i set it up in software to be Non-inverting, it doesn't change on the UMI. why would this be so?
Can you have one axis with its inhibit output active low, and another axis with it
s inhibit output active high?
Also, Do i need to pull the inhibit outputs high?
Your help will be much appreciated.

To whom it may concern:
Yes, you can have one axis with its inhibit output active low and another axis set to active high. You need to go into MAX under the Device Settings and expand the tree entitled Axis Settings. With the corresponding axis selected in the tree, you can set the inhibit output to active high or low. If you don't expand the tree under Axis Settings then whatever you set the inhibit output polarity to will apply to all axes on the board. That might be part of your problem.
That inhibit output shouldn't need to be pulled high. That would be handled internally to the board.
Hopefully that is help to you. Best of luck with things.
Jim Laudie
Applications Engineer, National Instruments

Problems setting up WNA with OAS 10.1.2.0.2 and Windows 2008

Similar Messages

Maybe you are looking for