Problems setting up WVC80N TZO account using my 2701HG-T 2Wire DSL Router

Hi!
I have 2 WVC80N cameras and I´m using a 2701HG-T 2Wire DSL Router, they are already configured and i can see them wireless, but i tryied again and again to configure both TZO accounts and always recived the next message:
Oops, there was an error when setting up your camera for remote access.
The wizard cannot automatically configure your router due to an invalid or unknown password. Please check your password settings on your router and try again. In many cases, your router may still have the default password setting.
Can somebody help me? What i need to do? Is there another way to watch them throug internet?
Regards!
Ed.

That link above wont work for you, you have a WVC80N and the signup is ON THE CD, not via the website.
This error is due to the router password not working, do you know the admin PW for the router to add/remove port forwarding rules?
If not, call your ISP or whoever gave you the router and get the password then try the setup again
http://www.MyHomeServer.com
Linksys IP camera reviews, Tutorials and How-To's on Web & Mobile Streaming

Similar Messages

Im having problem setting up my Hotmail account, it used to work fine until few days ago. It says ive entered an incorrect username or password which i can sign in fine with them details if i use laptop or safari through the phone, Please help..

Im having problem setting up my Hotmail account, it used to work fine until few days ago. It says ive entered an incorrect username or password which i can sign in fine with them details if i use laptop or safari through the phone, Please help..

I Sugges you to log into your hotmail acc and go to security and password change bit, then you will see two-step verification.. turn that off and you will be able to set it up on your iPhone/iPad or even Mac.
Give your phone a restart before trying to set it up. Thanks

How do I set up mutiple icloud accounts using my Apple ID but giving my children (and their ipod touches) their own icloud e-mail, so we do not share contacts photos etc

How do I set up mutiple icloud accounts using my Apple ID but giving my children (and their ipod touches) their own icloud e-mail, so we do not share contacts photos etc

Welcome to the Apple Community.
Create an iCloud account for each of them.

Trying to create a VM using reserved IP but getting error "Must specify MediaLocation or set a current storage account using Set-AzureSubscription"

I have created a reserved Ip and wanted to create a VM using the reserved IP. I had also created aimage of existing Vm to create the new VM and I have used command on Windows Powershell as mentioned below.
New-AzureVMConfig
-Name
"Amazon-10eBay-1" -InstanceSize
“Small” -ImageName
“Amazon-10-Image” | Add-AzureProvisioningConfig
-Windows -AdminUsername
“Akash” -Password “Stoneindia11” |
New-AzureVM
-ServiceName
"Amazon-10eBay-1" -ReservedIPName
"ResIPamazon10eBay1" -Location
"West US"
But its showing error "Must specify MediaLocation or set a current storage account using Set-AzureSubscription".
I have been trying to create this Vm from many days but not able to create one. Please help

Hello,
Microsoft Azure forums are over here:
https://social.msdn.microsoft.com/forums/azure/en-US/home
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Problems setting up hotmail email account on Blackberry Pearl

I have had difficulty setting up my hotmail account on my pearl. whenever i enter my username and password (which i have checked millions of times to ensure that it is correct) and hit log in i get the message "please check your information and try again". no matter how many times i try it i get the same message! has anyone had the same problem or know of a solution?

Hotmail has a policy of allowing old (which is active for long time or the ID that is never been deactivated) mail IDs to integrate with BlackBerry. Likewise, I can integrate my primary mail ID which is active for the last 17 years! My another ID which is also activated at the same time but blocked several time due to less use can't be integrate.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Problem setting up an email account on mini.

I setup my wife's account on my iPad as a test with no problem. But when I try to set it up on her mini it hangs in the "Verifying" stage of account setup and never completes! I have to do a reboot to get back to "home" pages. Results are the same whether I go directly thru "setup" or take the route thru "mail". Internet connection is fine and the account works from all other devices (ipad3, PC and laptop). any thoughts? thanks.

Sep 18, 2011 1:25 AM (in response to iphone238)
Close the mail app on the iphone and go to a computer, sign in to your yahoo mail account and do the verification that it pops up. If there is no such thing that pops up then go back to your iphone and do the following:
1.) Delete the yahoo mail account on your iphone.
2.) Add mail account using "other" instead of "Yahoo!" and setup as IMAP account.
3.) Use the following information:
- username MUST include @yahoo.com at the end
- incoming server = imap.mail.yahoo.com
- outgoing server = smtp.mail.yahoo.com
- always retype your password
Tell me if this solution works or doesn't work. It worked on my girlfriend's iphone4 after 16 hours of reading online and messing with it and a lot of restoring.

Problem setting up ATT email account with Apple Mail

I have a main ([email protected]) and sub email account ([email protected]) with ATT/Yahoo (formerly SBC).
I set these accounts up on Apple Mail for the first time, and selected the option "Remove copy from server after retrieving a message "RIGHT AWAY". But Apple Mail would not allow me to select that option for both the primary and sub account. It allowed me to select that option for the first account I set up (the sub account), but when I tried to select that option for the second account (the main account), it would not permit me to save the option and gave me the following error message:
The account path /Users/edelbert/Library/Mail/[email protected]@pop.att.yahoo.com is already being used by the account "GIFilm"
It will allow me to select the option to remove the copy AFTER ONE WEEK, but then I receive the same message over and over each time Apple Mail checks the ATT server.
ATT claims that it is the result of an SSL conflict between its software and Apple's, and claims that Apple has created a bug fix, but I can find no evidence of such a patch.
Can anyone help me?
Thanks

As far as I can tell, the problem might be with my password. It's working on my iPhone, but not my computer.
If it's just a matter of changing the password, it's cool. But I can't figure out how to change the password.
Any ideas on changing the password in mail preferences?
Thanks,
mhh

Problems setting up multiple exchange accounts with same user name

Hello,
I have two email addresses on the same exchange server at work that I would like to configure on my iPhone4 running iOS 4.3.3. I can setup the first email just fine but when I set up the second email iOS tells me " Cannot Create Account: An identical Exchange account already exists". Here is a working example:
[email protected]
[email protected]
username and password for both email1 and email2 are the same credentials. Am I getting this error message b/c the username for both accounts is the same? if so is there a workaround for it without having to change the username for one of the accounts?
Any help would be appreciated. Also, we are using Microsoft Exchange 2010.
Thanks

I'm having the same problem. From all the information I can find, iOS doesn't allow you to access multiple Exchange accounts using the same credentials. I'm not sure if this is a restriction of iOS or a restriction of Exchange ActiveSync.

How do I set up a guest account using the AirPort Express 2nd Generation?

I Just purchased a new 2nd Generation AirPort Express. The features list and the set-up guide says that I should be able to set up a guest account, but nowhere have I found how to do this. I am running AirPort Utility 5.6 on my MacBook Air under Lion and I even get a message that I should not make updates using version 5.6 because it is not the appropriate version for the 2nd generation AirPort Express. Software Update says there's nothing new for me. When I search the Apple support site there is not even a version of AirPort Utility 5.6.1 for Lion though there is one for Snow Leopard. Even when I installed that version on my Mac Mini running Snow Leopard, I could see no way to create a guest account.
I came across a YouTube video describing a demonstrating how to set up the guest account on Time Capsule and the AirPort Exteme. There it's quite obvious because in the General section there is a tab for setting up the guest account. There is no such tab in either version 5.6 of the AirPort Utility I'm running under Lion or version 5.6.1 running under Snow Leopard.
What am I missing?
-Bill

Apple assumes that you are connecting the AirPort Express to a simple modem....not a modem/router or gateway type of device......that provides both modem and router functions in one enclosure.
If you have the AirPort Express connected to a gateway device, the Express is detecting that another router is present on the network, so the Express operates in Bridge Mode to prevent the conflicts that would normally occur when two routers are on the same network.
Open AirPort Utility 5.6, select the AirPort Express and click Manual Setup
Click the Internet icon, then click the Internet Connection tab
If the Connection Sharing setting is currently configured to "Off (Bridge Mode)", the Guest Network cannot be enabled with the type of "modem" that you have without breaking some basic networking rules.

How do I set up multiple iMessage accounts using one apple ID?

We want to set up a new account for a family member to use some limited texting using an iPod. We have one family apple ID and would like to add the new account under that Apple ID. How do we do that? Thanks for any suggestions.

See:
MacMost Now 653: Setting Up Multiple iOS Devices For Messages and FaceTime

2 iphone 5's, 1 itunes account to share music; how do you set up 2 icloud accounts using one MacBookPro?

My wife and I each purchased the iphone 5 and we share an itunes account. How do I sync our iphones to our MacBookPro so we each have our own iCloud account (contacts, calendars, etc.)? We want to be able to share the itunes music on our computer.

If you are sycing your contacts and calendars with iCloud, don't sync them with your computer using iTunes. If you sync with both iCloud and iTunes this will cause duplicates. If you want to keep your contacts, calendar, etc. separated rather than merged, be sure to set up separate iCloud accounts on both phones using different Apple IDs. You can continue to share the same Apple ID for purchasing music, apps, etc.; it does not need to be the same as the ID you use for iCloud, iMessage or other services.
In terms of syncing your music and other non-iCloud data with the same computer, this article will explain different options depending on how you want to set it up: http://support.apple.com/kb/HT1495.

Problems with my yahoo email account using Firefox

I am using Firefox 14.0.1 and I have problems with my yahoo email account. I send an email, the receiver got a good version of my email, but when I see the same email into my sent box I see a differente text. When I use any other Internet browser, I can see a good version of my original email into the sent box.
Why???

Hi,
Please try a '''Ctrl + F5''' refresh. This helps to bring in the page contents afresh. You can also consider the [https://support.mozilla.org/en-US/kb/reset-firefox-easily-fix-most-problems Reset Firefox] feature via '''Help''' ('''Alt''' + '''H''') > '''Troubleshooting Information'''.
(To revert to the previous profile, close the new profile, start Firefox and choose the '''*.default''' profile. While the [https://support.mozilla.org/en-US/kb/profile-manager-create-and-remove-firefox-profiles Profile Manager] is open, you can also delete the newly reset profile (the one containing random numbers)).
[https://support.mozilla.org/en-US/kb/Managing-profiles Managing profiles]
[https://support.mozilla.org/en-US/kb/Profiles?s=profile&r=2&e=sph&as=s Profiles Howto]
If you have security software (antivirus, firewall etc.) installed, you can try deleting all existing instances of Firefox and related files in all the different configuration areas/modules of the security software. Instead create new allow/trusted rules for Firefox + its related processes. Even otherwise the security software may also ask again when Firefox is started and you can try to allow/trust at that time. Please see [https://support.mozilla.org/en-US/kb/Firewalls this].
[http://kb.mozillazine.org/Firewalls AV/Firewalls Configuration]

Problem setting up user ids to use the Oracle password file.

I want to set up my database users so that a password file is used for connecting to the database. I have completed these steps successfully.
BTW - DB is 11.2.0.3 on AIX power 64
1. Created the password file for the database using the orapwd command. Allowing 20 entries. Confirmed the file was created in the $ORACLE_HOME/dbs directory
2. Created a database user, sbrower
CREATE USER SBROWER IDENTIFIED BY <password> DEFAULT TABLESPACE USERS TEMPORARY TABLESPACE TEMP PROFILE DEFAULT ACCOUNT UNLOCK ;
GRANT DBA TO SBROWER;
ALTER USER SBROWER DEFAULT ROLE ALL;
GRANT UNLIMITED TABLESPACE TO SBROWER;
ALTER USER SBROWER QUOTA UNLIMITED ON USERS;
3. Connected to the database as SYS and granted sysoper to SBROWER
4. Using putty, ssh'ed into the server where the database resides.
5. Set the oracle variables (ORACLE_HOME, ORACLE_BASE, etc.) and PATH
6. Was able to connect to the database using sqlplus / as syoper
THE PROBLEM
For another user, EA_RDX_ORACLE1, I follow the same steps (2-6) bu when I execute step 6, it does not allow the connection
ERROR:
ORA-01031: insufficient privileges
   but, if I use sqlplus ea_rdx_oracle1/thepassword as sysoper it works
Looking at v$pwfile_users on the database:
USERNAME SYSDBA   SYSOPER      SYSASM
SYS      TRUE      TRUE      FALSE
SBROWER FALSE     TRUE      FALSE
EA_RDX_ORACLE1 FALSE TRUE FALSE
3 rows selected.
There is one thing that is different for the ea_rdx_oracle1 id's:
- The users who use this id, use a took called CyberVault to check out the id. The password for the id changes each time the id is checked out; however, the way the id is set up on the DB servers, us user does not have to enter the password when they log in (ssh).
I have sent an email to our unix admin asking his how the id was set up so that it can ssh into the server. It is not included in the list of users in any group in the /etc/ogroup file and it is not included in the /etc/opassword file.

The OS authentication ( sqlplus / as sysdba ) does not require the password file.
The problem may be related to the OS user you are connecting to that server - it is not a member of OSDBA group ( usually DBA ).

Problems setting up POP mail accounts on E71

i am having problems to set up my POP email accounts on my E71. the first account works, but only retrieves email- it won't send any.
the secong POP account is a gmail account and i have set iit up but it won't even connect. if anyone knows, what are the correct setting for security (Ports) and port number? i used the same setting as in my laptop but it just won't connect on the E71.
Please help!

Have a look at these two links:
http://www.e71fanatics.com/2008/07/e71-gmail-how-to-set-up-imap-with-built.html
http://www.realgeek.com/setting-up-gmail-on-nokia-e71/
Either one of these should solve your problem.
By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
The day we stop improving is the day we stop being good.

Problem setting up pop3 email account on my blackberry

Hi
I was wondering if anyone can give me any advice on a problem I am having. On my blackberry 8520 curve, I cannot seem to link my pop 3 account on my blackberry. It keeps saying invalid username or password. I have checked the username and password and both are correct. Today I phoned vodacom customer care and they were very helpful, and went through all the possible ways to try set it up, but she still got the same error - invalid username or password. I am using my own domain, but the guys who host my website say everything is fine. Here is the weird thing, it was working, but i deleted the account (mistakingly) and now cant get it to work again. Does anyone have any other possible solutions, because ive run out of ideas. Ive tried setting it up on a friends blackberry and get the same problem. The only thing I can think of is when I set up my email on my pc linking it to outlook express, it said it could not detect the settings searching by encrypted and had to use unencrypted search to find them, but even when I put the settings manually into my blackberry, it still wont work. All settings seem correct.
Any help will be much appreciated.
Thanks Mike

I'm not certain that this is the problem, but you may want to check with your Email provider to see if they require SPA (Secure Password Authentication) in order to access your e-mail. If anything, it'll be one problem to eliminate from the list of possibilities.
Disclaimer: I'm just a regular user like the rest of you. I have spent a lot of time learning the limitations of the Blackberries to know how to fix most problems. If I have suggested a fix, please give a kudo and mark as a solution!

Problems setting up WVC80N TZO account using my 2701HG-T 2Wire DSL Router

Similar Messages

Maybe you are looking for