Problems since 2.2.1  (applemobilebackup.exe error, long sync time)

After installing 2.2.1, I am experiencing the following and wondering if anyone on this forum has a solution to the following two issues. Thanks in advance.
While syncing to my pc (it's a toshiba laptop running xp sp3), right before completing, there has been an applemobilebackup.exe error appearing that I click ok to and then it finishes sync'ing. I'v searched the net and it seems like I'm the only one experiencing this??
It seems to keep taking longer and longer to sync. I remember the status bar running faster than I can keep an eye on it. After installing a few games, it's at a crawl these days. I uninstalled the Facebook app and still runs at a crawl. Anybody have any ideas how to enable faster sync times?

Here is an article from the apple support website that might help out.
http://support.apple.com/kb/TS1401
http://support.apple.com/kb/TS1878

Similar Messages

  • Applemobilebackup.exe error during backup

    I have been having some problems for over a month now backup up my iphone. Flat out can not backup. Gets to say 90-95% and then fails giving me the applemobilebackup.exe error to report to windows. I have tried reinstalling itunes, deleting mobile files off pc, removing anything I can find that has to do with the iphone or apple, all the way to a complete reformat of the pc. New itunes install and still getting the error. Running itunes 8.0.2.20 and iphone 2.2.1 on windows xp pro. Any reason why after a complete format I still get this error. No virus scan has been installed. Could it be the phone is done?

    Hi, I had a similar problem which I traced to a particular file on the Iphone which I had put there using AirShare. When I deleted the file and started a resync it worked fine.
    N

  • I am having Macbook Pro, I have recently tried updating my operating system to OS Yosemite, but after that its giving problem in connecting to Wifi. The error is "Connection Time out Occurred". Its getting connected by Ethernet cable.

    I am having Macbook Pro, I have recently tried updating my operating system to OS Yosemite, but after that its giving problem in connecting to Wifi. The error is "Connection Time out Occurred". Its getting connected by Ethernet cable.

    Take each of the following steps that you haven't already tried, until the problem is resolved. Some of these steps are only possible if you have control over the wireless router.
    Step 1
    Turn Wi-Fi off and back on.
    Step 2
    Restart the router and the computer. Many problems are solved that way.
    Step 3
    Change the name of the wireless network, if applicable, to eliminate any characters other than letters and digits. You do that on your router via its web page, if it's not an Apple device, or via AirPort Utility, if it is an Apple device.
    Step 4
    Run the Network Diagnostics assistant.
    Step 5
    In OS X 10.8.4 or later, run Wireless Diagnostics and fix the issues listed in the Summary, if any.
    Step 6
    Back up all data before proceeding.
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.
    Step 7
    You may need to change other settings on the router. See the guidelines linked below:
    Recommended settings for Wi-Fi routers and access points
    Potential sources of interference
    Step 8
    Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
    Step 9
    Reset the System Management Controller (SMC).

  • Since installing iCloud, my iPhone 3GS no longer syncs with my Outlook Calendar and Outlook Contacts.  I don't know what else to try, short of resetting the iPhone and completely reloading as a new device.  Any ideas, anyone?

    Since installing iCloud, my iPhone 3GS no longer syncs with my Outlook2010 Calendar and Outlook2010 Contacts.  I don't know what else to try, short of resetting the iPhone and completely reloading as a new device.  Any ideas, anyone?

    It's good to know.  The Apple instructions for loading iCloud on a PC just seem to have either overlooked or hidden this limit.  The larger problem is that it partially works:  partially and erratically.  So clean-up is great fun.

  • AppleMobileBackup.exe error message - help!!

    I synced my 3G as I normally do but got this message when the computer tried to do a back up: AppleMobileBackup.exe has encountered a problem and needs to close. We are sorry for the inconvenience.
    I'm using Windows XP and I haven't installed any crazy programs onto my phone or computer. The back up process runs for about 10+ minutes and just when it is about to reach the end, this message pops up.
    How do I fix this??

    I just got off the phone with Apple support and did the user account thing and the problem went away. The only problem now is everything including my entire library is on the other account. I use Iolo System Mechanic pro for my security software. I never had this problem till the 2.0.2 (5C1) download.
    I believe the the new user fixes the issue due to the fact that none of the preexisting files are being used . So there must be a conflict or corrupt file some where in the original iTunes directory that is not removed and or replaced during a reinstall. I will try this http://support.apple.com/kb/HT1275 and see if that works.
    I think it might be a corrupted back up and uninstalling apple mobile device support and removing any remaining files could solve the problem.

  • Just when i enter my fb home account and take any action like going into others profile or any other web page its only then that firefox say that it encountered a problem and needs to close firefox.exe error

    it asks me to send an error report i did sent one but it was of no use and this does not happens with anyother web page

    What you are experiencing is 100% related to Malware.
    Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
    You can try these free programs to scan for malware, which work with your existing antivirus software:
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
    * [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
    * [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
    Did this fix your problems? Please report back to us!

  • AppleMobileBackup.exe crashes and I can't update my iPod. Please help!

    Help!
    When backing up my iPod a file called AppleMobileBackup.exe errors and closes which stops my backing up process. I have a iPod touch first generation (which has MANY apps) and the newest iTunes.
    Please help me! I want to update my iPod but if it chrashes and isn't backed up... Well I need to be able to back up the iPod but it fails.

    It sounds like you had a computer problem and now the iPod thinks it was synced to another iTunes library.
    If you go to iTunes>Prefernces>Advanced yu will see whnere the media library is located. 
    Are you logged into the same account on the computer computr login screen, not in iTunes).
    The media library is in the directoy with your login.

  • Importer Process Server.exe error

    I'm using the CS4 version offered in Premier Pro CS5 when your computer isn't capable of handling 64 bit software. I cannot change to Windows Vista or Windows 7 because my computer is part of a network at my office and we are still using Window XP (even though my computer is new and could easily handle 64 bit software).
    I'm having a problem with an Importer Process Server.exe error. When I try to import audio clips that I've created in Soundbooth (they are set up as .wav files), everything seems to go fine at first. However, about the time I am trying to import the 3rd clip (and I have 22 I need to import into the video), I get the Importer Process Server.exe error and the system completely shuts down. This is really frustrating, because this is the last step before I will be finished with the video.
    I can't seem to find anything in the Help menu that fits my problem.
    Does anyone have any suggestions?

    OK, thanks. I already have full admin rights, so that wasn't the problem.
    As it turns out, it seems that the software was simply taking a long time to finish loading all of the clips even though a popup message stated that is was finished downloading (importing) the audio clips. After trying several times to reboot the software and having the same problem, I reloaded one last time and was interrupted and had to walk away for about 10 minutes for a quick meeting. When I came back, everything worked fine. The only thing I can figure out is that behind the scenes, the system was still loading the clips even after it had told me it was finished. At some point during the 10 minutes I was away, it apparently finished the download of all clips. Time was the only difference between the unsuccessful attempts and success.
    I'm now in the process of converting the video to a flash format. If all goes well with that, my first video project will actually be completed.
    Thanks again for all of your help and suggestions.
    This software is great as long as you can figure out the little quirks it seems to have, and it's nice to have some people out there that you can go to for answers.

  • I am using only one Apple ID. The problem, since iOS 6,  is the App Store purchased items screen just shows loading screen  it finally crashes or gives the error message 'can not connect to  Apple store'

    I am using only one Apple ID. The problem, since iOS 6,  is the App Store purchased items screen just shows loading screen  it finally crashes or gives the error message 'can not connect to  Apple store'

    I am using only one Apple ID. The problem, since iOS 6,  is the App Store purchased items screen just shows loading screen  it finally crashes or gives the error message 'can not connect to  Apple store'

  • Hi, dear friends,   I have a big problem:   Since I installed OS 10.9.3 MAV (Maverick), I am unable to use Adobe CS6. Each opening Photoshop attempt, the system tells me an error of type 6 or 16.   Thank you for your help, Guys,   Marius SANNA

    Hi, dear friends,
    I have a big problem:
    Since I installed OS 10.9.3 MAV (Maverick), I am unable to use Adobe CS6. Each opening Photoshop attempt, the system tells me an error of type 6 or 16.
    Thank you for your help, Guys,
    Marius SANNA

    Which version of Photoshop do you have? The current version is 13.0.6.

  • I have been having this problem since the fourth of this month. I tried to open iTunes and this error came up: "iTunes was not installed correctly. Please reinstall iTunes error 7 windows error 126". If anyone can help I would greatly appreciate it.

    I have been having this problem since the 4th of this month. I tried to open iTunes and this error message came up: "iTunes was not installed correctly. Please reinstall iTunes error 7 windows error 126". There is nothing else that comes up but if anyone can help or know anything about it I will greatly appreciate it.

    Have you tried google for this Error Message...
    http://support.microsoft.com/kb/959077

  • Getting NTVDM.EXE errors in itunes - keeps crashing

    Every time I start itunes I get a "16 bit MS-DOS Subsystem" error. Message reads...
    C:\WINDOWS\system32\ntvdm.exe
    Error while setting up environment for the application. Choose 'close' to terminate the application
    I then have the option to close or ignore it. If I ignore it I can still access the app store and stuff but when I go to sync my iphone itunes locks up and I have to go to task manager to end the program. What do I do? (this started with the latest itunes update... now I can't even update my iphone because it goes into a permanent backup loop (I have had to kill it after 12 hours a few times!)HELP!!!

    I don't have an answer for this, but from first principles here are some things to try.
    Since the problem occurs when you plug in your iPad there may be a problem with Apple mobile device support.
    Try removing iTunes and related programs using this method:
    http://support.apple.com/kb/HT1923
    Then reinstall.
    In case there really is a problem with ntvdm.exe, try running the system file checker:
    http://support.microsoft.com/kb/929833
    And finally, in case other software is interfering with it try using MSConfig to check for conflicts.:
    http://support.apple.com/kb/HT2292?viewlocale=en_US

  • Javaws.exe error in xi3.0 urgent

    Hi masters,
    Iam trying to open sxmb_ifr from abap stack the IR /ID and SLD /RWB screen opens.when i select IR/IR iam getting javaws.exe error.Pls suggest me .Iam facing this problem since one and half year.But cant able to troubleshoot.
    Regards,
    Winston.

    Hi Pinkle,
    I tried with j2sdk1.4.2_12 and 1.4.2_16 and reinstalled manytimes but the error is not rectified in XI 3.0 and PI 7.0.
    Regards,
    Winston.

  • Cwdss.exe error: can't read memory location

    I have 3 PCs running XP, Service Pack 1, each with a frame-grabber card, either NI 1409 and 1409. They run identical code. Each one reads the active video channels in sequence, and saves the new image locally on a DataSocket server. These are in remote locations, with seldom a visitor. The users are near a 4th machine, which gets images from the other 3 by reading their DataSocket servers. It is slower, since it does calculations on each image. This runs 24 hours a day, but about once a day one of the 3 image-capture machines--always the same one--halts, displaying an error message and waiting for someone to notice the message and push "OK". After that, it just keeps on going as if the error was no big problem. But of course it is a problem, since the halt is not noticed for a while.
    The error window is titled "Socket Notification Sink: csdss.exe Application Error". It then explains that "The instruction at location 0x0040aaf7 referenced memory at 0x482f6f72. This memory could not be 'read'." It always shows the same instruction and the same read address.
    What is this telling me? How can I tell what is going on at the address cited? How can it work for hours and then try an out-of-bounds read? Why does this happen with only one of the three machines? Could this be some infrequent timing conflict between reading and writing to the DataSocket?

    I am running Labview 6.1 on a Windows XP machine (Service Pack 1). I never run the code without the DataSocket, since the whole point is offer new images when needed to the PC in the room with the users, which does all the serious calculations. The image is stored in the DataSocket server as a 640 by 480 integer array of either U8 or I16 format, depending on the type of frame-grabber. The machine with the errors has a 1409 and so gets 10-bit data, saved in I16 format. The odd aspects, again, are that the program runs without a hitch for a day or so, then does this illegal read, and that the same code runs on two other machines without this problem ever showing up.
    Thanks,
    Alan Fisher

  • Hpsf.exe error windows 7

    Hi, I keep encountering a problem. Whenever I use anything from HP, it'll open hpsf.exe error. It'll say click ok or cancel and I tried to let windows sort out the problem but it does nothing. I was wondering if it was due to me deleting the 24/7 support thing. I didn't believe that was a HP product and deleted it. I can't figure out how to get it to work again right.
    The model of the desktop is: S5730Y
    It is Windows 7 Home Premium
    Thanks in advance,
    Chris Lamp

    Hello ChrisLamp87,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that your computer is producing an error message, and I would be happy to guide you towards a resolution! 
    Since you mentioned removing another parcel of software before this error message occured, I recommend uninstalling and re-installing the HP Support Assistant from Programs and Features. You can download and re-install the program at the following link.
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Maybe you are looking for

  • New to Photoshop cs5 extended...please help

    I recently submitted one of my photoshop paintings to a website. I followed the directions for dimensions and when the website uploaded my image is is really blury. Can anyone tell me how to fix this? My image was 3125x1175 pixels and 300 dpi

  • Why is outgoing mail rejected by the Exchange server?

    Hi all. One in every 10 emails sent via Mavericks Mail is being rejected by my Exchange server. It's more like one in two emails with attachments. Shutting down Mail and re-opening doesn't help. Eventually I get the rejection window and list of serve

  • Upgraded SDK, classes missing, now what?

    I have Flex Builder 3 with a professional liscense. FB3 includes classes like AdvancedDataGrid, AdvancedDataGridColumn, etc, that have a watermark over them until you enter the license, which then also unzips the files so you can see the source code.

  • What is included in 1.1.3?

    I'm very unsure as to what features this update brings and what bugs it fixes. Does anyone have a complete list of updates or can anyone explain what updates are included? I would very much appreciate it. Thanks.

  • Migrating to fresh Yosemite from aug 10.9 before betas

    I have a complex task: I think I will: 1. Install a whole fresh Mac OS X 10.10 Yosemite. 2. Read back/Migrate my aug Time Machine admin account of 10.9.? 3. How can I get the migration to an account with same name as before and ignore new main instal