Problems since installing Digital Camera RAW Compatibility Update version 6.01

I recently installed the Digital Camera RAW Compatibility Update version 6.01, however since updating my MacBook Pro (Retina, 15", Late 2013) isn't working right. My background is black (and I can't change it), I don't see the dock and I can't minimize any of my windows. HELP!!

Reinstall OS X.
Message was edited by: EZ Jim
Mac OSX 10.10.1

Similar Messages

  • Can't install Digital Camera Raw Compatibility Update 2.2

    Software Update wants to install Digital Camera Raw Compatibility Update 2.2, but it always fails, saying: "The update “Digital Camera Raw Compatibility Update” can’t be saved. You do not have appropriate access privileges. The Installer package has been moved to the Trash. To try again, open the package from the Finder."
    I've tried doing Repair Permissions in Disk Utility, but this has not helped. I'm using Mac OS X 10.5.5, all other recent updates have gone in fine.

    I had the same problem. Deleting the contents of the HD/library/Updates worked.
    Never the less I noticed that the permission set was different:
    Original permission set: admin R&W, admin R only, everyone R only.
    I also followed the Alias and found two files with the same permissions.
    Re-downloading (via software update) revealed a new permission set:
    (Me) R&W, Admin R&W, everyone Read only
    In both the alias and the two files downloaded. Note that (Me) denotes your user with administrator access.
    I believe that, since the update was downloaded automatically, the permissions were mismatched and instead of adding a system R&W privileges it added a second Admin Read only permission.
    Adding an administrator user with read and write permissions should solve the problem (as long as you authenticate as that particular administrator when prompted for intall authorization).
    Regards, Jaime.

  • Problem with Aperture 2 and Digital Camera Raw Compatability update 3.1

    Has anyone using Aperture 2 experienced problems with the Digital Camera Raw Compatability update 3.1. It may be purely coincidence but, since downloading this on March 3, I get the dreaded red screen and unsupported image format on my previously downloaded and edited RAW photos. I use a Pentax k-7 with which, once set up, I have had no problems until now!
    Please - any help would be very gratefully received

    That probably explains why any checks that your computer did to see if the Camera Raw update was okay to apply didn't stop it. You should probably contact Apple and explain that they broke something that was working fine previously.
    A few people have reported backing off Camera Raw 3.1 and going back to Camera Raw 3.0 for now. This note is one of the ones I've found describing how to do that, if you wish to try that. Or, you could head down the path Apple means to lead you on and upgrade to Aperture 3.
    Message was edited by: Ailish Eklof

  • Is Digital Camera RAW Compatibility Update 4.06 Affecting My Drivers?

    After installing Digital Camera RAW Compatibility Update 4.06 and booted in windows 7, I can hear the windows startup sound but there is no display. After rebooting using the last good know config, I was able to login into windows but my ethernet and bluetooth are not working. In the device manager,
    Ethernet and bluetooth device status: This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)

    Maybe. I don't know. I was able to use my ethernet before the update. After the update, I am facing these driver issues. My ethernet adapter cannot be found in the list of network connections.

  • Digital Camera RAW Compatibility Update 3.12 and later can not be installed on OSX 10.6.8.

    Hi
    I bought a new Canon EOS 5D mark 3 and noticed that my MacBook Pro with OSX 10.6.8 can not handle the new raw files.
    Searching google shown that I need Digital Camera RAW Compatibility Update 3.12 or later.
    So I tried with 3.12, 3.13 and 3.14, but all failed during installation with error: "Dieses Update unterstützt nur Aperture 3 und iPhoto 9."
    Hmmm
    Checking iPhoto ...
    About IPHOT shows "Iphoto '09 version 8.1.2 (424)"
    So I've updated Iphoto with version 9.2.1 (which I found matching my OSX after stepping down from highest version down ..... Apple is here not really supporting users here .......)
    Unfortunately this is only an update.
    So I need to install first a newer Iphoto version.
    Iphoto 11 I can buy in the app store, but I can not install it on OS/X 10.6.8 .....
    Lost!
    How do I get my raw files of 5Dm3 visible in OSX 10.6.8 ???????
    Any help welcome
    Thx
    Wolfgang

    I maintain up to date my system, yet I have from time to time when I take RAW picture issues in iPhoto not reading them.  Today, looking for another issue I came across this update and I was hopping it would resolve my issues with the RAW photos from my Pentax K-30.
    The error:
    Installer quit unexpectedly.
    Click Reopen to open the app again. Click Report to see more detail information and send to Apple.
    Backtrace not available
    Unknown thread crashed with X86 Thread State (32-bit):
      eax: 0x00000055  ebx: 0x00000000  ecx: 0x00000000  edx: 0x00000000
      edi: 0x00000000  esi: 0x00000000  ebp: 0x00000000  esp: 0x00000000
       ss: 0x0000001f  efl: 0x00010203  eip: 0x8fe01030   cs: 0x00000017
       ds: 0x0000001f   es: 0x0000001f   fs: 0x00000000   gs: 0x00000000
      cr2: 0xfffffffc
    Binary images description not available...
    This laptop cannot be upgraded further without hindering its performance.  Hence, I need to keep the version of iPhoto that I currently have.
    Thank you for your response.

  • Digital Camera RAW Compatibility Update 2.2 - White Balance Temperature

    Prior to downloading the Digital Camera RAW Compatibility Update 2.2 I was importing RAW photos without a problem. Now all my photos are imported with a temperature of 2500K. I have a second computer on which this update hasn't been loaded and photos load with the proper temperature setting. When I load photos in Photoshop the temperature is indicated correctly. My DSLR is a fairly old Canon D60. Any suggestions?

    Mark:
    Welcome to the Apple Discussions. You can downgrade to 2.1 as described in this post:
    Source:http://discussions.apple.com/message.jspa?messageID=8142169#8142169
    Page Title: Apple - Support - Discussions - Can't import Canon RAW's (400D) to ...
    Date: Wednesday, September 24, 2008 7:26:47 PM
    This might work (from Clem who figured it out):
    Delete the file: System/Library/CoreServices/RawCamera.bundle then (re)install the previous version.
    Get the previous version here:
    http://www.apple.com/support/downloads/digitalcamerarawcompatibilityupdate21.htm l
    Restart your computer.
    Althought the fix was for correcting the problem of not being able to import at all it does give a means of downgrading to 2.1.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

  • How do I reboot my MacBook Air? It says software is being installed; digital camera RAW compatibility and safari

    I am trying to get rid of this "Installation Alert" window.  I tried to force quit all and reboot, but it says "Your computer can't be restarted now, because software is being installed."  Below that it says "Digital Camera RAW Compatibility Update and Safari are being installed.  Interrupting the install Amy damage your computer.  You can restart when the install is complete". It has a progress bar below showing it being 80% complete, but it just hangs there.  Now safari is going crazy.

    Then try holding down the Power button for 5-10 seconds until your computer shuts down. Wait one minute then:
    Repair the Hard Drive and Permissions - Lion/Mountain Lion
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.

  • Unable to update to Digital Camera RAW Compatibility Update 5.03

    This is probably an Apple Update issue, but is anyone else experieincing a greyed out Update button.  I restarted and the update button was available again.  Initieated download, but got no message about installing our any success in updating it, so for now it remains in my update available pane for several days.  Real pain!  Any ideas on how to force or troubleshoot this update issue?  Running Mavericks 10.9.1

    What is your Aperture version? Is it compatible with the latest raw support? At least Aperture 9.4.5
    Any ideas on how to force or troubleshoot this update issue?
    Have you checked, if the update has actually been installed? You can see in the "About" panel the version of raw support that Aperture is using.
    If the raw support has not been installed, try to download it from the Support page:
    Digital Camera RAW Compatibility Update 5.03  http://support.apple.com/kb/DL1717
    Sometimes you can recover unfinished downloads by using the menu item "Store > Check for unfinished downloads" in the App Store menu.

  • Digital camera RAW compatibility Update

    What is this update and is it important in the running of my OS?  I'm not sure why I am getting these updates from the AP store but ever since I updated to Yosemite, I've gotten two of these.  Can someone please explain to me what this update actually is?
    Thanks!

    Hello LBann,
    Welcome to the Apple Support Communities!
    These digital camera RAW compatibility updates allow different digital cameras to use the RAW format when importing to programs such as Aperture and iPhoto. Please read over the attached article for more information. 
    OS X Yosemite: Supported digital camera RAW formats - Apple Support
    Have a great day,
    Joe

  • Digital Camera Raw Compatibility update installation issues.

    I have attempted to install the Digital Camera Raw Compatibility update 6.01 but I am being asked over and over to restart my Mac Pro. The app store shows that I still need to install the update. 

    I was surprised to see it listed.
    I don't have a shiny new Leica  .  Will have to make do with my shiny new RX1R  .
    (Added:)
    I don't follow Medium-Format equipment, but a quick check tells me the Pentax 645D came out in 2010.
    Message was edited by: Kirby Krieger

  • HT201070 Software update - Digital Camera RAW compatability update 4.04

    I have an Imac and about 6 months ago the "Updates" tab in "Applications" reflected the following update "Digital Camera RAW compatability update 4.04" When I tried to update this in applications it has for 6 months given me a time out error. I cannot remove it from the updates tab in applications and it is blocking other updates, how can I resolve this?

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select "/var/log/install.log" from the file list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • "The update "Digital Camera Raw Compatibility Update" can't be saved."

    Hi I was going through software update and this message popped up "The update “Digital Camera Raw Compatibility Update” can’t be saved." How do I fix this? Thanks!

    ow88 wrote:
    I was going through software update and this message popped up "The update “Digital Camera Raw Compatibility Update” can’t be saved." How do I fix this?
    I don't have a direct answer for you, but if Software Update shows that update as "Digital Camera RAW Compatibility Update 2.6", you can download and install it yourself here:
    http://support.apple.com/kb/DL845

  • Digital Camera RAW Compatibility Update 3.13

    Digital Camera Raw 3.13 just released
    Supported by Digital Camera RAW Compatibility Update 3.13
    Canon EOS-1D X
    Nikon D800E
    Nikon D3200
    Olympus OM-D E-M5
    Panasonic LUMIX DMC-GF5
    Sony Alpha SLT-A57

    Well done code cutters at Aperture.  At first glance the Digital Camera RAW Compatibility Update 3.13 seems to have fixed the problem.  The quickness of your action is appreciated!

  • Canon EOS 100D is listed as compatible in Digital Camera RAW Compatibility Update 6.01 but when I connect my camera a message appears telling it's not compatible with the operating system?

    Canon EOS 100D is listed as compatible in Digital Camera RAW Compatibility Update 6.01 and when I have checked for software updates there are none available.  I've downloaded the Canon software, connected to my mac via the cable and followed the instructions in the manual.  Sadly I just get a message saying it's not compatible with the operating system.  I've tried inserting the memory card into the mac to and it doesn't seem to see it.  Can anyone help please?

    Camera RAW ≠ Camera driver, the RAW update is for the .CR2 canon raw image file (in your case) compatibility.
    What happens when you try to import photos using Image Capture or iPhoto?
    Can you take a screenshot of the error message?
    I always prefer and recommend using memory card import over using the camera.

  • Digital camera RAW Compatibility update 6.02 does not seem to update and keeps showing as an update to down;road. Can anyone help. Thanks. Tim

    Digital camera RAW Compatibility update 6.02 does not seem to update and keeps showing as an update to down;road. Can anyone help. Thanks. Tim

    Download it directly from Apple and apply;
    Digital Camera RAW Compatibility 6.02

Maybe you are looking for