Problems sorting multiple releases from the same year

Hello,
I have just discovered how to arrange my iTunes library in chronological order by artist using 'Album by Year', i.e. All an artists albums are in order of release, Artist > Year > Disc # > Track #
However,
I have now encountered a new (minor) problem where there are several releases from the same year.
For example, I have some artists who have released several singles, EPs and albums all in the same year (those busy people) and so all releases from any one year are filed alphabetically, not technically in chronological order, but close.
It would require an exact release date in the 'Year'/'File Info' fields. Is this possible?
Am I just being too picky?
Thanks people. My head hurts.

Similar Messages

Problems generating multiple services from the same EAR using servicegen

I have a single EJB JAR that contains multiple stateless session beans. I
want to expose each of these individually as a service. So I have defined
the following in my build file:
<servicegen destEar="${ear.file}" warName="${war.file.name}"
contextURI="web_services">
<service ejbJar="${ejbc.jar.file}"
targetNamespace="http://www.acme.com/xauto" serviceName="AService"
serviceURI="/AService" includeEJBs="AService" generateTypes="True"
expandMethods="True"/>
<service ejbJar="${ejbc.jar.file}"
targetNamespace="http://www.acme.com/xauto" serviceName="BService"
serviceURI="/BService" includeEJBs="BService" generateTypes="True"
expandMethods="True"/>
<service ejbJar="${ejbc.jar.file}"
targetNamespace="http://www.acme.com/xauto" serviceName="CService"
serviceURI="/CService" includeEJBs="CService" generateTypes="True"
expandMethods="True"/>
<service ejbJar="${ejbc.jar.file}"
targetNamespace="http://www.acme.com/xauto" serviceName="DService"
serviceURI="/DService" includeEJBs="DService" generateTypes="True"
expandMethods="True"/>
<service ejbJar="${ejbc.jar.file}"
targetNamespace="http://www.acme.com/xauto" serviceName="EService"
serviceURI="/EService" includeEJBs="EService" generateTypes="True"
expandMethods="True"/>
</servicegen>
I execute the task and it runs without issue. However, when I attempt to
deploy the EAR I get some odd results (there are multiple jars listed all
with my original name and then a number appended, for example MyApp.ear2).
The deployment fails because each of these JARs contains the same session
beans.
So, I'm wondering if my only option is to package each session bean in a
separate EJB JAR or if there is another way I could get this to work.
Thanks,
Rob

Thanks, Neal. I'll do as you suggest.
Just a little feature enhancement request, as well. It would be nice if the
option existed to break out the webservices for all the session beans in a
ejb rather than creating one all-encompassing interface of all the methods.
I think this would be a useful feature.
Thanks, again,
Rob
"Neal Yin" <[email protected]> wrote in message
news:[email protected]...
I am not sure what can cause this. But I will make servicegen check for
duplicate.
For now, in order to make sure your automatic build process, you can use
ant's build in task "jar" to update your application.xml with a correctone
after servicegen.
-Neal
"Rob Moore" <[email protected]> wrote in message
news:[email protected]...
Neal,
After discussing this issue with a coworker, I found that when he buildsthe
ear on his machine using the servicegen entries I specified previously,the
application.xml is generated correctly. Mine, as you guessed, puts in
multiple module entries all containing references to the same jar. I'm
puzzled because we are apparently running in the same environment. Anyidea
what might be causing it?
Thanks,
Rob
"Neal Yin" <[email protected]> wrote in message
news:[email protected]...
Hi Rob,
There is something wrong during generating application.xml for the
ear.
After servicegen, if you open generated application.xml, you probablycan
see duplicate entries for one module. Please go ahead delete thoseredundant
entries. Let me know if this works.
-Neal
"Rob Moore" <[email protected]> wrote in message
news:[email protected]...
I have a single EJB JAR that contains multiple stateless session
beans.
I
want to expose each of these individually as a service. So I havedefined
the following in my build file:
<servicegen destEar="${ear.file}" warName="${war.file.name}"
contextURI="web_services">
<service ejbJar="${ejbc.jar.file}"
targetNamespace="http://www.acme.com/xauto" serviceName="AService"
serviceURI="/AService" includeEJBs="AService" generateTypes="True"
expandMethods="True"/>
<service ejbJar="${ejbc.jar.file}"
targetNamespace="http://www.acme.com/xauto" serviceName="BService"
serviceURI="/BService" includeEJBs="BService" generateTypes="True"
expandMethods="True"/>
<service ejbJar="${ejbc.jar.file}"
targetNamespace="http://www.acme.com/xauto" serviceName="CService"
serviceURI="/CService" includeEJBs="CService" generateTypes="True"
expandMethods="True"/>
<service ejbJar="${ejbc.jar.file}"
targetNamespace="http://www.acme.com/xauto" serviceName="DService"
serviceURI="/DService" includeEJBs="DService" generateTypes="True"
expandMethods="True"/>
<service ejbJar="${ejbc.jar.file}"
targetNamespace="http://www.acme.com/xauto" serviceName="EService"
serviceURI="/EService" includeEJBs="EService" generateTypes="True"
expandMethods="True"/>
</servicegen>
I execute the task and it runs without issue. However, when I
attempt
to
deploy the EAR I get some odd results (there are multiple jars
listed
all
with my original name and then a number appended, for exampleMyApp.ear2).
The deployment fails because each of these JARs contains the samesession
beans.
So, I'm wondering if my only option is to package each session bean
in
a
separate EJB JAR or if there is another way I could get this to
work.
>>>>
Thanks,
Rob

How do I receive multiple texts from the same sender, each individually?

How do I receive multiple texts from the same sender, each individually?

So I receive automated reminders from my job & I want them to come individually. For example, one text -- time stamped 10:14 pm, then another 11:12 am, coming as separate msgs.

*** Receiving multiple emails from the same person

This is a new issue that started happening today and I'm wondering if someone can help.
When receiving emails today, they are duplicating as they are coming into my inbox. The wierd thing is, the amount of duplicate emails is inconsistent. All emails are coming in as duplicates, but some messages duplicate up to 7 times for each sender. Other times, the message is in my inbox 4 times. Same message from the same sender.
Is there a way I can tell my MacMail to stop this from happening???
Thanks in advance.

People keep reporting this problem from time to time, and almost always it is some sort of Yahoo account and there is nothing the user can do to fix it. The problem usually fixes itself after some time for no apparent reason, just as it started.
Try using a different mail client, such as Thunderbird, and see whether the problem happens there as well. If so, then you know Mail has no bearing on it and there is nothing you can do other than complaining to your ISP or whoever is responsible for that account.

How Can I delete multiple messages from the same address in Mac Mail

Hope this is in the correct Community. Hope someone can help me to delete multiple email messages from the same email address.
At the moment I can do it by holding down the Command key and highlighting each email, but that can be difficult with many messages
to delete. Is there a quicker way?
Thanks for any help on this.

Thanks for the reply, appreciate your input. I did find another way of doing it and that is to highlight the first e-mail, hold down the shift key and click on the last one. That highlights them all and then they can all be deleted. Your ideas also work of course and I thank you for that. Cheers.

Connecting to multiple clusters from the same client

We have a scenario where our cache client (extend client) should be able to connect to multiple clusters. All the clusters use the exact same configuration (same caches, same services etc) but running in different geographical locations. I know that the <remote-addresses> can be used to add multiple addresses but I'm assuming this is provided solely for fault tolerance. So, does the client actually support connecting to multiple clusters at the same time?
Thanks
Sijo Mathew

Hi Sijo,
Normally to connect a client to multiple clusters you would just define multiple <proxy-scheme> settings in your client configuration file, each one having a different name and pointing to a different cluster. You then map caches to the proxy-scheme for the cluster those caches live on.
What may confuse things in your case is that you say the different clusters are identical and contain the same caches and services so you may have problems mapping caches on the client to different clusters.
What are you trying to achieve by doing this if the clusters are all identical?
JK

Multiple ResultSets from the same connection occuring at the same time

Is it possible to have the following code? The issue is that you are iterating through two result sets created from the same connection at the same time.
try {
Connection conn=createConnection();
Statement s=conn.createStatement();
ResultSet rs=s.executeQuery(someSQL);
while (rs.next()) {
     Statement s2=conn.createStatement();
      ResultSet rs2=s2.executeQuery(someOtherSQL);
      while (rs2.next()) {
           //do something
} catch (SQLException sqle) {
} finally {
freeConnection(conn);

Joel,
The code compiles, but I have not tried running it. It is a question I need to know, designing a program.
The question is whether some error would come up or the first ResultSet would be corrupted because a second were created before the first one was closed.
--Gabe

Can I combine multiple threads from the same contact in iMessage?

iMessage displays multiple threads for the same contact. Its very confusing and has resulted in lost messages. I've tried changing a number of settings but to no avail. Seems to require everyone in my contact list to eliminate all their email addresses in iMessage.
Begs the question why does iMessage even need this information? Worse, why does it suck it into its settings by default. The directory server should only require a valid Apple ID (associated with the users' devices) in order to direct an iMessage between two contacts.

Thanks for the reply, appreciate your input. I did find another way of doing it and that is to highlight the first e-mail, hold down the shift key and click on the last one. That highlights them all and then they can all be deleted. Your ideas also work of course and I thank you for that. Cheers.

Connect one JAVA ADS instance to multiple clients from the same ABAP system

Hi,
Does anyone know whether it is possible to connect multplie clients from the same ABAP system to a JAVA instance running ADS?
If so how do you setup the java destinations in Visual Admin and SM59 RFC connections?
Any help is appreciated,
Sander

Dear Sander,
this is always the case if you arrange the ADS connection.
You have to set up the RFC connection 'ADS' in ABAP side and this connection/destination is client independent. So you can use this from all clients of your abap system.
On Java side you have to arrange the already mentioned FP_ICF_DATA_<SID> destination. On the ABAP system and client (you specify in this destination) you have to maintain the user ADS_AGENT and your templates should also exist on this client. If there is no client defined, the default client will be used.
Regards
Istvan

Multiple edits from the same clip.

Hi guys,
I have a project which requires a lot of different edits from the same clip.
Is there any way to do this without having to duplicate the same clip each time and then making my new edit?
For instance -
Clip 1 is 20 minutes long.
My first edit is from 1:10 to 1:35.
I then duplicate Clip 1 and make another edit from 2:40 to 3:55.
I'm using Premier CS5.
Thanks,
Dave.

Sub clips are not a general edit way of doing things efficiently.
They are more of a way of creating a bin full of "selects" ( selected clips in a Selects Folder for easy and quick access and review). That is a time consuming process but works well in some situations.
Standard general edit practice is to edit from Source Monitor.
drop Clip into Source Monitor
Mark In and Out point and drop that to the Time line. (many ways to do that Insert/ overlay/ shortcuts etc..)
Next...Move thru and create new In and Out and do the same
continue thru the Source Clip till complete...
Then on the Timeline ( sequence) Tim and work the clips.
Now ...some "learners" edit the source clip in the timeline using Razor Tool...hacking and chopping and deleting and dragging bits of stuff all over the show. Thats in efficient and clunky .

Multiple Contacts From The Same Company

Is there a way to "clone" a contact entry to avoid re-entering all of the information for a new contact from the same company?

Let's figure this out mrucci! I want to ensure I fully understand so I may assist accordingly. Are you creating several contacts with different numbers from the same company and want to know if there is a quick option to auto generate the company contact details? Please confirm so I may further assist. Thank you.
TominqueBo_VZW
Please follow us on Twitter @VZWSupport

Problems with multiple connections in the same transaction

Hi all !
          I'm have two questions regarding the way weblogic handles multiple
          connections.
          1) first, I don't understand why weblogic always create a new Managed
          Connection when I'm asking for 2 connection handles on the same connection
          factory and with the same connectionRequestInfo. Isn't it supposed to share
          connections ?
          For instance, the following snippet of code results in the creation of 2
          managed connections:
          ConnHandle conn1 = myCF.getConnection(myRequInfo);
          ConnHandle conn2 = myCF.getConnection(myRequInfo);
          The class corresponding to myRequInfo does implement the equals and hash
          method, so that weblogic's connection manager could use them to check that
          the queried connections are the same, and thus could share a single
          ManagedConnection between multiple connection handles. Apparantly it does
          not do that...
          2) OK, I just let weblogic create the 2 managed connections, but... My use
          of the connections is as part of a transaction. Here is what happens:
          ConnHandle conn1 = myCF.getConnection(myRequInfo);
          // a new managedConn1 is instanciated. the following happens (just a
          description)
          // xar1 = managedConn1.getXAResource()
          // xar1.start(NOFLAGS)
          // I use the conn1 handle
          conn1.close();
          //xar1.end(SUSPEND)
          ConnHandle conn2 = myCF.getConnection(myRequiInfo);
          // a new managed connection managedConn2 is instanciated.
          // xar2 = managedConn2.getXAResource();
          // xar2.start(RESUME)
          // I use conn2 handle
          conn2.close();
          // xar2.end(SUSPEND);
          // my bean returns from the remote invocation
          // the client of the bean asks to commit (using UerTransaction.commit on the
          client side)
          // xar2.end(SUCCESS)
          // xar2.commit(onePhase=true);
          // managedConn2.cleanup();
          And that's all. So, as one can see, managedConn1.cleanup was never called.
          When looking in the weblogic console, I can see that I have one connection
          with 0 handle and one with 1 handle, deemed as still being in a transaction.
          So, the conenction manager apparantly loses a managed connection during the
          transaction. And it's very very bad because after a couple of transactions,
          I'm running out of managed connections (I had set a limit of 10).
          Any one has seen such a weird behavior ? Is this a problem on my side, or
          weblogic's ? Thanks for your help.
          Sylvain


          I ran another test. This time I have a bean that makes use of a connector
          once per method invocation. The bean method invoked is "sayHello" and it
          gets a connection to the EIS, perform an operation on it and release it. The
          connector I developed uses XA transactions.
          My test client just calls 3 times myBean.sayHello().
          I can distinguish two cases:
          1) first, the client doesn't do transaction demarcation. In this case, since
          the sayHello method is marked as requiring transaction, the folowing happens
          in the bean:
          // **** first invocation of the bean
          connHandle = myCF.getConnection();
          // managedConn1 is instanciated
          // xar1 = managedConn1.getXAResource()
          // xar1.start(NOFLAGS);
          // managedConn1.getConnection gives a connection handle
          connHandle.doSomeWork();
          connHandle.close()
          // xar1.end(SUCCESS);
          // the bean returns from its invocation
          // xar1.commit(onePhase=true)
          // managedConn1.cleanup()
          // **** second invocation of the bean
          connHandle = myCF.getConnection();
          // managedConnectionFactory.matchManagedConnection is called. It returns the
          managed connection (managedConn1) that is in the passed set
          // xar1 = managedConn1.getXAResource()
          // xar1.start(NOFLAGS);
          // managedConn1.getConnection gives a connection handle
          connHandle.doSomeWork();
          connHandle.close
          // xar1.end(SUCCESS);
          // the bean returns from its invocation
          // xar1.commit(onePhase=true)
          // managedConn1.cleanup()
          // **** third invocation of the bean
          connHandle = myCF.getConnection();
          // managedConnectionFactory.matchManagedConnection is called. It returns the
          managed connection (managedConn1) that is in the passed set
          // xar1 = managedConn1.getXAResource()
          // xar1.start(NOFLAGS);
          // managedConn1.getConnection gives a connection handle
          connHandle.doSomeWork();
          connHandle.close
          // xar1.end(SUCCESS);
          // the bean returns from its invocation
          // xar1.commit(onePhase=true)
          // managedConn1.cleanup()
          2) second case : the client performs transaction demarcation. In that case,
          the connection manager instanciates 3 managed connections, calls start/end
          on each XAResource corresponding to each managed connection, calls commit
          once, but also calls cleanup only once, leaving 2 lost managed connections
          The client looks like this:
          UserTransaction utx = context.lookup("javax/transaction/UserTransaction");
          utx.begin();
          MyBean myBean = ctx.lookup(".......");
          myBean.sayHello();
          myBean.sayHello();
          myBean.sayHello();
          utx.commit();
          on the server the following happens:
          // **** first invocation of the bean
          connHandle = myCF.getConnection();
          // managedConn1 is instanciated
          // xar1 = managedConn1.getXAResource()
          // xar1.start(NOFLAGS);
          // managedConn1.getConnection gives a connection handle
          connHandle.doSomeWork();
          connHandle.close()
          // xar1.end(SUSPEND);
          // the bean returns from its invocation
          // **** second invocation of the bean
          connHandle = myCF.getConnection();
          // managedConn2 is instanciated
          // xar2 = managedConn2.getXAResource()
          // xar1.isSameRM(xar2) is called. returns true
          // xar2.start(RESUME);
          // managedConn2.getConnection gives a connection handle
          connHandle.doSomeWork();
          connHandle.close()
          // xar2.end(SUSPEND);
          // the bean returns from its invocation
          // **** third invocation of the bean
          connHandle = myCF.getConnection();
          // managedConn3 is instanciated
          // xar3 = managedConn3.getXAResource()
          // xar2.isSameRM(xar3) is called. returns true
          // xar3.start(RESUME);
          // managedConn3.getConnection gives a connection handle
          connHandle.doSomeWork();
          connHandle.close()
          // xar3.end(SUSPEND);
          // the bean returns from its invocation
          // the client invokes commit on the UserTransaction
          // xar3.end(SUCCESS);
          // xar3.commit(onephase = true);
          // managedConn3.cleanup();
          And so, managedConn1 and managedConn2 got lost in the way...
          What's more puzzling, it's that when monitoring my connector with the
          console, I can see that there are 3 connections. 2 declared as still having
          one handle used and being in transaction, and one not in transaction and
          with 0 active handle. BUT when monitoring the JTA part of the server, I can
          see that there has been 1 transaction that committed, and no connection is
          "in flight" as the console says. So, on one side the console says 2 managed
          connections are still part of a transaction while on the other it says that
          no transactions are currently in flight.
          Thanks for any kind of help on this very bizarre behavior.
          Sylvain

Problem with multiple threads accessing the same Image

I'm trying to draw into one Image from multiple threads. It works fine for a while, but then suddenly, the image stops updating. Threads are still running but the image won't update. I'm using doublebuffering and threads are simply drawing counters into Image with different speed.
It seems like the Image gets deadlocked or something. Anyone have any idea what's behind this behavior or perhaps better solution to do such thing.
Any help will be appreciated.

Sorry Kglad, I didn't mean to be rude. With "No coding
errors" I meant the animation itself runs with no errors. I'm sure
you could run the 20 instances with no freezing (that's why I put
the post :) ) But I'm affraid it is an animation for a client, so I
cannot distribute the code.
Perhaps I didnt explain the situation clearly enough (in part
because of my poor english...).-
- By 20 instances I mean 20 separated embedded objects in the
html
- The animation is relatively simple. A turned on candle, in
each cycle I calculate the next position of the flame (that
oscilates from left to right). The flame is composed by 4
concentric gradients. There is NO loops, only an 'onEnterFrame'
function refreshing the flame each time.
- It's true that I got plenty variables at the _root level.
If that could be the problem, how can I workaround it?
- It is my first time trying to embed so many objects at the
same time too. No idea if the problem could be the way I embed the
object from the html :(
- The only thing I can guess is that when a cycle of one of
the object is running, the other 19 objects must wait their turn.
That would explain why the more instances I run, the worst results
I get. In that case, I wonder if there's a way to run them in a
kind of asynchronous mode, just guessing...
Any other comment would be appreciated. Anyway, thanks a lot
everybody for your colaboration.

Send a message to multiple receivers from the same service

Hi all,
I registered on SAP community several months ago, I found many good hints and solutions to some of the problems encountered in XI and for which I thank you, but this is the first time I address a question to a common issue, written already about.
I have a scenario with 1 File FTP sender adapter and 2 Receiver adapters:1 FTP adapter and 1 MAIL adapter. The input message is sent to one of these receiver adapters based on the value taken by a specific field from the input message.The receiver adapters are using the same party and service.
The requirement is to solve this without using BPM.
I have read "multiple receiver" issue related blogs and tried to use the standard receiver determination. Thus, I have 1 Sender Agreement, 2 Receiver agreements (one for FTP and one for MAIL), 1 Interface Determinations (with the 2 inbound interfaces and interface mappings corresponding to FTP and MAIL output) and 1 standard Receiver Determination where I added the party and service twice and specified for both the condition. The condition is based on XPath, is correct.
In sxmb_moni, I get the error: "No receiver could be determined". If I remove one of the conditions, then the output is sent on both receiver adapters, instead of only the one that fulfills the condition.
Can you please give me some feedback on how to solve this problem? It is rather urgent.
I have also tried to create 2 Interface Determinations and have 2 Receiver Determinations, each one with the right condition. But I get the same error message.
Is the problem due to the fact that I don't use 2 different services ?
If you know how this can be solved without using BPM, please reply.
Thanks a lot,
Alina hudea

> In sxmb_moni, I get the error: "No receiver could be determined". If I remove one of the conditions, then the output is sent on both receiver adapters, instead of only the one that fulfills the condition.
Hi,
I think the problem in Receive Determination. As you mentioned when you remove one of the condition then it works..
What I concluded is, I think while creating your Receiver Determination for multiple receivers you added the receivers by pressing the plus sign and that means you are using mulitiple receivers with "AND" condition, so in this condition when both the condition will be true then only you will get success.
What you can do is, Just remove one of the receivers and then add it by pressing the "OR" symbol i.e. by pressing this ( [ ] ) symbol and put your conditions as you like.
I hope what I have concluded is correct..
Regards,
Sarvesh

Multiple columns from the same dimension table as row labels performing slowly

(Working with SSAS tabular)
I'm trying to figure out what the approach should be for the following scenario:
Lets say we have a Customer table. The table has columns such as account number, department number, name, salesperson, account manager, number of customers, delivery route, etc
A user of the model could want to see any permutation of that information as the row labels. How should that be handled?
What we've been doing so far is that the user adds each column they want into the "ROWS" section in Excel. This works fine with smaller tables (for example, "Department" table with a "Department Code" and "Department Name",
but on large tables this quickly chokes. I understand why this is happening, I just haven't found a better way to accomplish the same thing.
I can add a calculated column to the model through VS, but obviously this is unsupportable and unscalable when each person needs their own permutations of the data. Can something similar be done in Excel?
This question seems to be what I need:
http://social.msdn.microsoft.com/Forums/en-US/97d1157a-1402-4227-b96a-79524401ddcd/mdx-query-performance-when-selecting-multiple-attributes-from-same-dimension?forum=sqlanalysisservices
However I can't find any information on how to add those properties (is it a multidimensional-only thing?)

Thanks for the help. Sorry but i'm a self-taught developer, and i may be missing some basics :)
Anyway i've done what you suggested but i get this error:
[nQSError: 15011]The dimension table source Dimension Services.DM_D_SERVIZI_SRV has an aggregate content specification that specifies the level Product. But the source mapping contains column COD_PRODUCT with a functional dependency association on a more detailed level .
where:
- DM_D_SERVIZI_SRV is the physical alias for the Service Dimension (and the name of the LTS too)
- COD_PRODUCT is the leaf of the hierarchy, the physical primary key, but it hasnt to be included in the hierarchy
Do i have to add another level with the primary key and hide it to the users?
I tried to solve this going to the logical tables source properties, on the tab contents, setting "logical level" to null for the hierarchy, but i don't know if this is correct.
Thanks

Problems sorting multiple releases from the same year

Similar Messages

Maybe you are looking for