Problems starting managed server via nodemanager
Hello,
I have a WebLogic 6.1 SP2 installation on two Solaris 8 maschines.
One hosts the admin server and the seconds hosts a managed server.
I installed the nodemanager on both maschines. They seems to run
normally.
I configured the "Remot Start" for the managed server as mentioned in
the manual. I didn't specified any values in that panel because the
nodemanager uses the same environment as the WLS so these values should
fit the managed WLS too.
But as I try to start the managed server I got the following error
message:
Starting WebLogic Server ....
Child exited
The WebLogic Server did not start up properly.
Exception raised:
java.lang.NoClassDefFoundError: java/lang/reflect/InvocationHandler
at weblogic.management.Admin.initialize(Admin.java:279)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:362)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
So I specified some basic values on the "Remote Start" panel:
BEA_HOME: /www/apps/bea/
ROOT_DIR: /www/apps/bea/wlserver6.1
CLASSPATH:
/www/apps/bea/wlserver6.1/lib/weblogic_sp.jar:/www/apps/bea/wlserver6.1/lib/weblogic.jar
No I got this message:
Starting WebLogic Server ....
The WebLogic Server did not start up properly.
Exception raised:
java.lang.NoClassDefFoundError: java/lang/reflect/InvocationHandler
at weblogic.management.Admin.initialize(Admin.java:279)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:362)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
Child exited
What did I wrong?
Has anybody experiences on this problem?
Thanks !
Falko Zurell - Webmaster
Pixelpark AG
Germany
nodemanager must be using the old jvm (1.2.2 or whatever comes by
default with 2.8). set up the environment or modify
startNodeManager.sh so that it uses java 1.3.1 that ships with WLS6.1
o.
Falko Zurell <[email protected]> wrote in message news:<[email protected]>...
Hello,
I have a WebLogic 6.1 SP2 installation on two Solaris 8 maschines.
One hosts the admin server and the seconds hosts a managed server.
I installed the nodemanager on both maschines. They seems to run
normally.
I configured the "Remot Start" for the managed server as mentioned in
the manual. I didn't specified any values in that panel because the
nodemanager uses the same environment as the WLS so these values should
fit the managed WLS too.
But as I try to start the managed server I got the following error
message:
Starting WebLogic Server ....
Child exited
The WebLogic Server did not start up properly.
Exception raised:
java.lang.NoClassDefFoundError: java/lang/reflect/InvocationHandler
at weblogic.management.Admin.initialize(Admin.java:279)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:362)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
So I specified some basic values on the "Remote Start" panel:
BEA_HOME: /www/apps/bea/
ROOT_DIR: /www/apps/bea/wlserver6.1
CLASSPATH:
/www/apps/bea/wlserver6.1/lib/weblogic_sp.jar:/www/apps/bea/wlserver6.1/lib/weblogic.jar
No I got this message:
Starting WebLogic Server ....
The WebLogic Server did not start up properly.
Exception raised:
java.lang.NoClassDefFoundError: java/lang/reflect/InvocationHandler
at weblogic.management.Admin.initialize(Admin.java:279)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:362)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
Child exited
What did I wrong?
Has anybody experiences on this problem?
Thanks !
Similar Messages
-
HANDSHAKE_FAILURE problem when starting managed server via NOdeManager
hi all, i am trying to start a managed server using nodeManager, but i keep on
getting following exception:
weblogic.nodemanager.NodeManagerException: [Could not execute command start for
server managedServer via the Node Manager - reason: [CommandInvoker: Failed to
send command: 'online to server 'managedServer' to NodeManager at host: 'localhost:5555'
with exception FATAL Alert:HANDSHAKE_FAILURE - The handshake handler was unable
to negotiate an acceptable set of security parameters.. Please ensure that the
NodeManager is active on the target machine].] at weblogic.nodemanager.NodeManagerRuntime.executeCommand(NodeManagerRuntime.java:472)
at weblogic.nodemanager.NodeManagerRuntime.start(NodeManagerRuntime.java:76) at
java.lang.reflect.Method.invoke(Native Method) at
here is my script for starting nodemanager
set JAVA_HOME=c:\bea\jdk131
set WL_HOME=c:\bea\weblogic700
set PATH=%WL_HOME%\server\bin;%JAVA_HOME%\bin;%PATH%
set CLASSPATH=.;%WL_HOME%\server\lib\weblogic_sp.jar;%WL_HOME%\server\lib\weblogic.jar
java -hotspot -ms16m -mx16m -classpath %CLASSPATH% -Dbea.home=C:\bea\weblogic700
-Djava.security.policy=C:\bea\weblogic700\server\lib\weblogic.policy -Dweblogic.nodemanager.weblogicHome=C:\bea\weblogic700
-Dweblogic.nodemanager.listenAddress=172.21.73.94 -Dweblogic.nodemanager.listenPort=5555
-Dweblogic.nodemanager.trustedHosts=C:\bea\weblogic700\common\nodemanager\config\nodemanager.hosts
-Dweblogic.nodemanager.certificateFile=C:\bea\weblogic700\common\nodemanager\config\demo.crt
weblogic.nodemanager.NodeManager
i have created an admin server, called adminserver
then i have created in the same domain a server called managedserver
both servers run on the same machine,at different port number.
i have created a machine, and associated managedserver to it.
in the machine/configuration/nodemanager i have set listenaddress localhost and
listenport 5555.
my nodemanager starts automatically at htat port. however, when i try to start
the managed server via adminserver console, i got the exception mentioned in
the subject.
can anyone help?
regards
marco
can anyone point me to the right direction for solving this problem?
in the adminserver console i have defined a machine for teh managedserver, and
nodemanager is supposed to run at localhost:5555 (and indeed it does, because
ihave started it successfully).
thanx in advance and regards marcoMarco.
Sorry, this is not a solution to your problem but i am trying to solve the same
problem for a week now.
I have wl7.0 sp2, 1 admin server, 2 managed servers on the same box. I get the
same error. I know that the default certificate installed provides a hostname
verification of weblogic.com. I turned the hostname verification off, i put in
the Dweblogic.nodemanager.sslHostNameVerificationEnabled=false, i get the same
error when starting the managed server. I went ahead and created my own certificate
for machine called mallik, created my own passphrase, created a new keystore,
made the admin server view the keystore, used the same certificate for both the
admin server and the node manager. It still fails with the same error. I went
ahead and added the machine 'mallik' to nodeManager.hosts file. It fails. I am
totally confused now what needs to be done.
My nodeManger.hosts looks like this:
mallik 10.100.10.130
managedServer1 10.100.10.130
managedServer2 10.100.10.13
Below is the startNodeManager.cmd.
@echo off
@rem *************************************************************************
@rem This script can be used to start the WebLogic NodeManager
@rem
@rem This script sets the following variables before starting the NodeManager:
@rem
@rem WL_HOME - The root directory of your WebLogic installation.
@rem NODEMGR_HOME - The home directory for this NodeManager instance.
@rem JAVA_HOME - Location of the version of Java used to start WebLogic
@rem Server. This variable must point to the root directory of
@rem a JDK installation and will be set for you by the
@rem installer. See the WebLogic platform support page
@rem (http://e-docs.bea.com/wls/platforms/index.html) for an up-to-date
list of
@rem supported JVMs on Windows NT.
@rem PATH - Adds the JDK and WebLogic directories to the system path.
@rem CLASSPATH - Adds the JDK and WebLogic jars to the classpath.
@rem JAVA_OPTIONS - Java command-line options for running the server. (These
@rem will be tagged on to the end of the JAVA_VM and MEM_ARGS)
@rem JAVA_VM - The java arg specifying the VM to run. (i.e. -server,
@rem -client, etc.)
@rem MEM_ARGS - The variable to override the standard memory arguments
@rem passed to java
@rem
@rem *************************************************************************
SETLOCAL
set WL_HOME=C:\bea7.0\weblogic700
set NODEMGR_HOME=%WL_HOME%\common\nodemanager
set JAVA_HOME=C:\bea7.0\jdk131_06
Call %WL_HOME%\common\bin\commEnv.cmd
@rem If NODEMGR_HOME does not exist, create it
:checkNodeManagerHome
if exist %NODEMGR_HOME% goto checkJava
echo.
echo NODEMGR_HOME %NODEMGR_HOME% does not exist, creating it..
mkdir %NODEMGR_HOME%
@rem Check that java is where we expect it to be
:checkJava
if exist %JAVA_HOME%\bin\java.exe goto runNodeManager
echo The JDK wasn't found in directory %JAVA_HOME%.
echo Please edit this script so that the JAVA_HOME
echo variable points to the location of your JDK.
goto finish
:runNodeManager
if not "%JAVA_VM%" == "" goto noResetJavaVM
rem set JAVA_VM=-hotspot
set JAVA_VM=%COMM_VM%
:noResetJavaVM
if not "%MEM_ARGS%" == "" goto noResetMemArgs
set MEM_ARGS=-Xms32m -Xmx200m
:noResetMemArgs
@echo on
set CLASSPATH=.;%JAVA_HOME%\lib\tools.jar;%WL_HOME%\server\lib\weblogic_sp.jar;%WL_HOME%\server\lib\weblogic.jar;%CLASSPATH%
set PATH=%WL_HOME%\server\bin;%JAVA_HOME%\bin;%PATH%
cd %NODEMGR_HOME%
#"%JAVA_HOME%\bin\java.exe" %JAVA_VM% %MEM_ARGS% %JAVA_OPTIONS% -classpath "%CLASSPATH%"
"-Dbea.home=C:\bea7.0" "-Dweblogic.security.SSL.trustedCAKeyStore=%WL_HOME%\server\lib\cacerts"
"-Djava.security.policy=%WL_HOME%\server\lib\weblogic.policy" "-Dweblogic.nodemanager.reverseDnsEnabled=true"
"-Dweblogic.nodemanager.javaHome=%JAVA_HOME%" weblogic.nodemanager.NodeManager
"%JAVA_HOME%\bin\java.exe" %JAVA_VM% %MEM_ARGS% %JAVA_OPTIONS% -classpath "%CLASSPATH%"
"-Dbea.home=C:\bea7.0" "-Dweblogic.security.SSL.trustedCAKeyStore=%WL_HOME%\server\lib\cacerts"
"-Djava.security.policy=%WL_HOME%\server\lib\weblogic.policy" "-Dweblogic.nodemanager.certificateFile=C:\bea7.0\user_projects\myDomain\mallikcert.pem"
"-Dweblogic.nodemanager.sslHostNameVerificationEnabled=false" "-Dweblogic.nodemanager.javaHome=%JAVA_HOME%"
"-Dweblogic.ListenAddress=mallik" "-Dweblogic.nodemanager.nativeVersionEnabled=true"
"-Dweblogic.nodemanager.reverseDnsEnabled=true" "-Dweblogic.nodemanager.javaHome=%JAVA_HOME%"
"-Dweblogic.nodemanager.trustedHosts=%WL_HOME%\common\nodemanager\config\nodemanager.hosts"
"-Dweblogic.management.pkpassword=weblogic" weblogic.nodemanager.NodeManager
goto finish
:finish
ENDLOCAL
I would appreciate if anybody can help me.
Mallik.
"Marco" <[email protected]> wrote:
>
hi all, i am trying to start a managed server using nodeManager, but
i keep on
getting following exception:
weblogic.nodemanager.NodeManagerException: [Could not execute command
start for
server managedServer via the Node Manager - reason: [CommandInvoker:
Failed to
send command: 'online to server 'managedServer' to NodeManager at host:
'localhost:5555'
with exception FATAL Alert:HANDSHAKE_FAILURE - The handshake handler
was unable
to negotiate an acceptable set of security parameters.. Please ensure
that the
NodeManager is active on the target machine].] at weblogic.nodemanager.NodeManagerRuntime.executeCommand(NodeManagerRuntime.java:472)
at weblogic.nodemanager.NodeManagerRuntime.start(NodeManagerRuntime.java:76)
at
java.lang.reflect.Method.invoke(Native Method) at
here is my script for starting nodemanager
set JAVA_HOME=c:\bea\jdk131
set WL_HOME=c:\bea\weblogic700
set PATH=%WL_HOME%\server\bin;%JAVA_HOME%\bin;%PATH%
set CLASSPATH=.;%WL_HOME%\server\lib\weblogic_sp.jar;%WL_HOME%\server\lib\weblogic.jar
java -hotspot -ms16m -mx16m -classpath %CLASSPATH% -Dbea.home=C:\bea\weblogic700
-Djava.security.policy=C:\bea\weblogic700\server\lib\weblogic.policy
-Dweblogic.nodemanager.weblogicHome=C:\bea\weblogic700
-Dweblogic.nodemanager.listenAddress=172.21.73.94 -Dweblogic.nodemanager.listenPort=5555
-Dweblogic.nodemanager.trustedHosts=C:\bea\weblogic700\common\nodemanager\config\nodemanager.hosts
-Dweblogic.nodemanager.certificateFile=C:\bea\weblogic700\common\nodemanager\config\demo.crt
weblogic.nodemanager.NodeManager
i have created an admin server, called adminserver
then i have created in the same domain a server called managedserver
both servers run on the same machine,at different port number.
i have created a machine, and associated managedserver to it.
in the machine/configuration/nodemanager i have set listenaddress localhost
and
listenport 5555.
my nodemanager starts automatically at htat port. however, when i try
to start
the managed server via adminserver console, i got the exception mentioned
in
the subject.
can anyone help?
regards
marco
can anyone point me to the right direction for solving this problem?
in the adminserver console i have defined a machine for teh managedserver,
and
nodemanager is supposed to run at localhost:5555 (and indeed it does,
because
ihave started it successfully).
thanx in advance and regards marco -
Facing error in starting managed server from nodemanager
Hi All,
I have installed WebLogic server 10.3.4 and installed OSB 11.1.1.4.0. I created domain with one admin server and one managed server for osb. When I started managed server with the startManagedWebLogic command it got started successfully but when I am trying tp start the managed server from nodemanager I am getting the following error
starting weblogic with Java version:
FATAL ERROR in native method: JDWP No transports initialized, jvmtiError=AGENT_ERROR_TRANSPORT_INIT(197)
[ERROR] aborted
JRockit aborted: Unknown error (50)
ERROR: transport error 202: bind failed: Address already in use
ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../../../src/share/back/debugInit.c:690]
Starting WLS with line:
D:\JDK\JROCKI~1.0\bin\java -jrockit -Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=8453,server=y,suspend=n -Djava.compiler=NONE -Xms256m -Xmx512m -Dweblogic.Name=osb_server1 -Djava.security.policy=D:\ORACLE~1\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Dweblogic.system.BootIdentityFile=D:\Oracle_OSB\Middleware\user_projects\domains\osb_domain\servers\osb_server1\data\nodemanager\boot.properties -Dweblogic.nodemanager.ServiceEnabled=true -Dweblogic.security.SSL.ignoreHostnameVerification=false -Dweblogic.ReverseDNSAllowed=false -Xverify:none -da:org.apache.xmlbeans... -ea -da:com.bea... -da:javelin... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:com.bea.sbconsole... -Dplatform.home=D:\ORACLE~1\MIDDLE~1\WLSERV~1.3 -Dwls.home=D:\ORACLE~1\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=D:\ORACLE~1\MIDDLE~1\WLSERV~1.3\server -Dcommon.components.home=D:\ORACLE~1\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=D:\ORACLE~1\MIDDLE~1\USER_P~1\domains\OSB_DO~1 -Djrockit.optfile=D:\ORACLE~1\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=D:\ORACLE~1\MIDDLE~1\USER_P~1\domains\OSB_DO~1\config\FMWCON~1\servers\osb_server1 -Doracle.domain.config.dir=D:\ORACLE~1\MIDDLE~1\USER_P~1\domains\OSB_DO~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=D:\ORACLE~1\MIDDLE~1\USER_P~1\domains\OSB_DO~1\config\FMWCON~1\carml -Digf.arisidstack.home=D:\ORACLE~1\MIDDLE~1\USER_P~1\domains\OSB_DO~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=D:\ORACLE~1\MIDDLE~1\USER_P~1\domains\OSB_DO~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=D:\ORACLE~1\MIDDLE~1\USER_P~1\domains\OSB_DO~1\servers\osb_server1\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=D:\ORACLE~1\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,D:\ORACLE~1\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dem.oracle.home=D:\Oracle_OSB\Middleware\oracle_common -Djava.awt.headless=true -Dweblogic.management.discover=false -Dweblogic.management.server=http://soaspt-app01.scotwat.net:7010 -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=D:\ORACLE~1\MIDDLE~1\patch_wls1034\profiles\default\sysext_manifest_classpath;D:\ORACLE~1\MIDDLE~1\patch_ocp360\profiles\default\sysext_manifest_classpath weblogic.Server
[WARN ] Use of -Djrockit.optfile is deprecated and discouraged.
FATAL ERROR in native method: JDWP No transports initialized, jvmtiError=AGENT_ERROR_TRANSPORT_INIT(197)
[ERROR] aborted
JRockit aborted: Unknown error (50)
ERROR: transport error 202: bind failed: Address already in use
ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../../../src/share/back/debugInit.c:690]
<11-Mar-2013 13:22:17> <FINEST> <NodeManager> <Waiting for the process to die: 5916>
<11-Mar-2013 13:22:17> <INFO> <NodeManager> <Server failed during startup so will not be restarted>
<11-Mar-2013 13:22:17> <FINEST> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>
My nodemanager is started and reachable. The error above says "Address already in use" but I am able to start my managed server through startManagedWebLogic.cmd command.
Can anyone please tell me what could be the issue. It is really urgent. Please help!!Hi Roshni,
It is likely that a configuration is missing or not set properly in the Node Manager properties file (nodemanager.properties) since the managed server can be started up using startManagedWebLogic.cmd but not with Node Manager. I would complete the following steps to fix the problem:
1. Go to %WLS_HOME%\common\nodemanager and open up nodemanager.properties (Make a backup of the file first). NOTE: WLS_HOME is your WebLogic Server home.
2. Look for the parameters "StartScriptEnabled" and "StopScriptEnabled". They should be set to true. If not, please set them to true.
3. Save and close the file.
4. Restart the Node Manager
If you are still unable to start the manager server using Node Manager, you may need to update the DEBUG_PORT parameter in setDomainEnv.cmd located in %MIDDLEWARE_HOME%\user_projects\domains\%DOMAIN_HOME%\bin (always make a backup before changing a configuration file). You may refer to Oracle Support note 1272642.1 for more information about the nodemanager.properties file and how to configure the DEBUG_PORT parameter in setDomainEnv.cmd if needed.
Thanks,
Scott (PITSS)
http://pitss.com/us -
Starting managed server with nodemanager
Hi there,
Please help me with the weblogic server installation, i've studk with failed to start managed server with node manager. My scenario as below:
(1) set up the main server and able to run the server successfully.
(2) set up one managed server, set up one machine on same server as main server.
(3) assign machine to created managed server.
(4) after that i've tried to run that managed server and error giving as below:
Error from main server terminal
===================
<NodeManager> <BEA-300048> <Unable to start the server 'ManagedServer1': Exception while starting server 'ManagedServer1': java.io.IOException: Server failed to start up. See server output log for more details.>
Error from Node Manager Termal
====================
<Info> <MainServer> <'ManagedServer1'> <Server failed during startup so will not be restarted>
<Dec 7, 2009 7:04:45 PM> <Warning> <Exception while starting server ''ManagedServer1'': java.io.IOException: Server failed to start up. See server output log for more details.>
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:303)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:542)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:119)
at weblogic.nodemanager.server.Handler.run(Handler.java:66)
at java.lang.Thread.run(Thread.java:619)
Thanks in advance,
TimSorry , i forgot to mention that the OS i am using is Solaris.
Thx -
Cannot start managed server via WLST - 'Overriding the ListenPort ...'
Hello everyone
I've created a development domain that has two machine, each of them has two weblogic server instances. On machine-2, I've started NodeManager already.
I started WLST tool, connect to AdminServer and invoke 'start' command to start managed server on machine-2:
start('MS-02','Server','t3://dvc.danang.vn:7003')
but I get fail message like that
wls:/dnict_domain/serverConfig> start('MS-02','Server','t3://dvc.danang.vn:7003')
Overriding the ListenPort or ListenAddress is not supported.
WLST will use the ListenPort and ListenAddress that are configured on the ServerMBean
Starting server MS-02 ....Permission denied (publickey,password).
Traceback (innermost last):
File "<console>", line 1, in ?
File "<iostream>", line 1280, in start
File "<iostream>", line 1744, in raiseWLSTException
WLSTException: Error occured while performing start : Error starting the server : Error occured while performing start : Server with name MS-02 failed to be started
Use dumpStack() to view the full stacktrace
wls:/dnict_domain/serverConfig> dumpStack()
This Exception occurred at Sun Oct 09 18:46:16 ICT 2011.
weblogic.management.scripting.ScriptException: Error occured while performing start : Server with name MS-02 failed to be started
at weblogic.management.scripting.ExceptionHandler.handleException(ExceptionHandler.java:48)
at weblogic.management.scripting.LifeCycleHandler.startServer(LifeCycleHandler.java:501)
at weblogic.management.scripting.WLScriptContext.start(WLScriptContext.java:477)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.python.core.PyReflectedFunction.__call__(Unknown Source)
at org.python.core.PyMethod.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.core.PyObject.invoke(Unknown Source)
at org.python.pycode._pyx21.start$80(<iostream>:1270)
at org.python.pycode._pyx21.call_function(<iostream>)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyFunction.__call__(Unknown Source)
at org.python.pycode._pyx28.f$0(<console>:1)
at org.python.pycode._pyx28.call_function(<console>)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyCode.call(Unknown Source)
at org.python.core.Py.runCode(Unknown Source)
at org.python.core.Py.exec(Unknown Source)
at org.python.util.PythonInterpreter.exec(Unknown Source)
at org.python.util.InteractiveInterpreter.runcode(Unknown Source)
at org.python.util.InteractiveInterpreter.runsource(Unknown Source)
at org.python.util.InteractiveInterpreter.runsource(Unknown Source)
at weblogic.management.scripting.WLST.main(WLST.java:180)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.WLST.main(WLST.java:29)
weblogic.management.scripting.ScriptException: Error occured while performing start : Server with name MS-02 failed to be startedI'm wondering about "Permission denied (publickey,password)" error. Can you show me how to fix this issue?
Any suggestion is appreciated
Regards
Cuong PhamTry removing the 't3://dvc.danang.vn:7003' argument. If this information is configured in the managed server, its unnecessary.
Also, is the NodeManager registered with the AdminServer? You can use the command "nmEnroll([domainDir], [nmHome])" while connected to the AdminServer to if its not. -
Can't start vanilla 8.1.4 platform managed server via NodeManager
I cannot get a managed server to start via the NodeManager if I create a WL Platform domain. I CAN get it to work just fine if I create a regular WLS domain. I was wondering if anyone else has seen this behavior.
Steps to Reproduce
===================
1) Use the configuration wizard to create a WebLogic Platform domain. Name the domain "Test". Use all defaults.
2) Once the domain is created, go into the domain directory and run the create_db.cmd script to build out the necessary tables to support the platform domain
3) Start the node manager. On my machine I use the following command:
C:\bea\weblogic81\server\bin\startnodemanager 127.0.0.1 5555
4) Start the admin server via the startWebLogic.cmd file
5) Open the console for the admin server. Create a Machine "MyMachine" (name is really unimportant). Use the default NodeManager port of 5555
6) Create a managed server. Call it "test1". Set the port to 8000 and be sure to assign it to the machine you just created.
7)Set the remote start properties. On my machine I just set the classpath to "c:\bea\weblogic81\server\lib\weblogic.jar;C:\bea\weblogic81\workshop\lib\wsrp-common.jar;C:\bea\weblogic81\server\lib\xbean.jar" and I also set the Java Home to point to the default JRocket JVM that ships with 8.1.4
8) Be sure to save your changes by hitting the "Apply" button. Then using the "Control" tab for the "test1" managed server, click the "Start this Server" link.
9) Wait about 30 - 40 seconds, then click on the server log for that server. On my machine I get the following exception in the log:
<Mar 22, 2005 6:04:46 PM PST> <Info> <[email protected]:5555> <Starting Server test::test1 ...>
<Mar 22, 2005 6:04:47 PM PST> <Info> <[email protected]:5555> <Server test::test1 started, process id = 5,504>
<Mar 22, 2005 6:04:48 PM PST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with BEA WebLogic JRockit(TM) 1.4.2_05 JVM R24.4.0-1 Version ari-38120-20041118-1131-win-ia32 from BEA Systems, Inc.>
<Mar 22, 2005 6:04:49 PM PST> <Info> <Management> <BEA-141140> <The managed server is going to contact the admin server at http://169.254.40.11:7001 to check if there exists a running admin server at this URL.>
<Mar 22, 2005 6:04:49 PM PST> <Info> <Configuration Management> <BEA-150017> <This server is being started as a dependent managed server.>
<Mar 22, 2005 6:04:49 PM PST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 8.1 SP4 Mon Nov 29 16:21:29 PST 2004 471647
WebLogic XMLX Module 8.1 SP4 Mon Nov 29 16:21:29 PST 2004 471647 >
<Mar 22, 2005 6:04:49 PM PST> <Info> <Configuration Management> <BEA-150015> <Connecting to the administration server http://169.254.40.11:7001 to retrieve the initial configuration.>
<Mar 22, 2005 6:04:50 PM PST> <Notice> <Log Management> <BEA-170019> <The server log file C:\bea\weblogic81\common\nodemanager\test1\test1.log is opened. All server side log events will be written to this file.>
The WebLogic Server did not start up properly.
weblogic.security.service.SecurityServiceRuntimeException: [Security:090371]Problem instantiating Authentication Provider java.lang.IllegalStateException: This query is too complex to be processed.
at weblogic.security.service.PrincipalAuthenticator.initialize(Ljava.lang.String;[Lweblogic.management.security.ProviderMBean;)V(PrincipalAuthenticator.java:205)
at weblogic.security.service.PrincipalAuthenticator.<init>(Ljava.lang.String;[Lweblogic.management.security.ProviderMBean;)V(PrincipalAuthenticator.java:262)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doATN(Ljava.lang.String;Lweblogic.management.security.RealmMBean;)Lweblogic.security.service.PrincipalAuthenticator;(SecurityServiceManagerDelegateImpl.java:581)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealm(Lweblogic.management.security.RealmMBean;Ljava.util.HashMap;)V(SecurityServiceManagerDelegateImpl.java:420)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.loadRealm(Ljava.lang.String;)V(SecurityServiceManagerDelegateImpl.java:700)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealms()V(SecurityServiceManagerDelegateImpl.java:733)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(Lweblogic.security.acl.internal.AuthenticatedSubject;)V(SecurityServiceManagerDelegateImpl.java:876)
at weblogic.security.service.SecurityServiceManager.initialize(Lweblogic.security.acl.internal.AuthenticatedSubject;)V(SecurityServiceManager.java:734)
at weblogic.t3.srvr.T3Srvr.initializeHere()V(T3Srvr.java:822)
at weblogic.t3.srvr.T3Srvr.initialize()V(T3Srvr.java:670)
at weblogic.t3.srvr.T3Srvr.run([Ljava.lang.String;)I(T3Srvr.java:344)
at weblogic.Server.main([Ljava.lang.String;)V(Server.java:32)
Reason: weblogic.security.service.SecurityServiceRuntimeException: [Security:090371]Problem instantiating Authentication Provider java.lang.IllegalStateException: This query is too complex to be processed.
<Mar 22, 2005 6:04:53 PM PST> <Critical> <WebLogicServer> <BEA-000364> <Server failed during initialization. Exception:weblogic.security.service.SecurityServiceRuntimeException: [Security:090371]Problem instantiating Authentication Provider java.lang.IllegalStateException: This query is too complex to be processed.
weblogic.security.service.SecurityServiceRuntimeException: [Security:090371]Problem instantiating Authentication Provider java.lang.IllegalStateException: This query is too complex to be processed.
at weblogic.security.service.PrincipalAuthenticator.initialize(Ljava.lang.String;[Lweblogic.management.security.ProviderMBean;)V(PrincipalAuthenticator.java:205)
at weblogic.security.service.PrincipalAuthenticator.<init>(Ljava.lang.String;[Lweblogic.management.security.ProviderMBean;)V(PrincipalAuthenticator.java:262)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doATN(Ljava.lang.String;Lweblogic.management.security.RealmMBean;)Lweblogic.security.service.PrincipalAuthenticator;(SecurityServiceManagerDelegateImpl.java:581)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealm(Lweblogic.management.security.RealmMBean;Ljava.util.HashMap;)V(SecurityServiceManagerDelegateImpl.java:420)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.loadRealm(Ljava.lang.String;)V(SecurityServiceManagerDelegateImpl.java:700)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealms()V(SecurityServiceManagerDelegateImpl.java:733)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(Lweblogic.security.acl.internal.AuthenticatedSubject;)V(SecurityServiceManagerDelegateImpl.java:876)
at weblogic.security.service.SecurityServiceManager.initialize(Lweblogic.security.acl.internal.AuthenticatedSubject;)V(SecurityServiceManager.java:734)
at weblogic.t3.srvr.T3Srvr.initializeHere()V(T3Srvr.java:822)
at weblogic.t3.srvr.T3Srvr.initialize()V(T3Srvr.java:670)
at weblogic.t3.srvr.T3Srvr.run([Ljava.lang.String;)I(T3Srvr.java:344)
at weblogic.Server.main([Ljava.lang.String;)V(Server.java:32)
>
<Mar 22, 2005 6:04:53 PM PST> <Emergency> <WebLogicServer> <BEA-000342> <Unable to initialize the server: weblogic.security.service.SecurityServiceRuntimeException: [Security:090371]Problem instantiating Authentication Provider java.lang.IllegalStateException: This query is too complex to be processed.>
I am baffled by this error. Can anyone help shed some light on this issue? I'm sure there is some bit I left un-flipped somewhere, but I don't know where to look. Many thanks in advance!
- JeffPlease help me over this error: (Weblogic clustered setup, two managed servers and one admin server, siteminder security providers configured)
bash-2.05$ ./startManagedWebLogic.sh managedServer5 http://sunert1.ad.infosys.com:7007
./startManagedWebLogic.sh: -Dsmasa.home=/export/home/ngtyasqa/bea/asa: not found
CLASSPATH=/export/home/ngtyasqa/bea/asa/conf:/export/home/ngtyasqa/bea/asa/lib/smjavaagentapi.jar:/e
xport/home/ngtyasqa/bea/asa/lib/log4j.jar:/export/home/ngtyasqa/bea/asa/lib/sm_jsafe.jar:/export/hom
e/ngtyasqa/bea/asa/lib/smclientclasses.jar:/export/home/ngtyasqa/bea/asa/lib/smjavasdk2.jar:/export/
home/ngtyasqa/bea/asa/lib/imsapi.jar/export/home/ngtyasqa/bea_kunal/jdk142_04/lib/tools.jar:/export/
home/ngtyasqa/bea/weblogic81/server/lib/weblogic_sp.jar:/export/home/ngtyasqa/bea/weblogic81/server/
lib/weblogic.jar::/export/home/ngtyasqa/bea/weblogic81/common/eval/pointbase/lib/pbserver44.jar:/exp
ort/home/ngtyasqa/bea/weblogic81/common/eval/pointbase/lib/pbclient44.jar:/export/home/ngtyasqa/bea_
kunal/jdk142_04/jre/lib/rt.jar:/export/home/ngtyasqa/bea/weblogic81/server/lib/webservices.jar:
PATH=/export/home/ngtyasqa/bea/weblogic81/server/bin:/export/home/ngtyasqa/bea_kunal/jdk142_04/jre/b
in:/export/home/ngtyasqa/bea_kunal/jdk142_04/bin:/export/home/ngtyasqa/bea_kunal/jdk142_04/bin:/usr/
bin
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://<hostname>:<port>/console *
<Mar 21, 2006 5:25:48 PM GMT+05:30> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server w
ith Java HotSpot(TM) Client VM Version 1.4.2_04-b05 from Sun Microsystems Inc.>
<Mar 21, 2006 5:25:49 PM GMT+05:30> <Info> <Management> <BEA-141140> <The managed server is going to
contact the admin server at http://sunert1.ad.infosys.com:7007 to check if there exists a running a
dmin server at this URL.>
<Mar 21, 2006 5:25:49 PM GMT+05:30> <Info> <Configuration Management> <BEA-150017> <This server is b
eing started as a dependent managed server.>
<Mar 21, 2006 5:25:49 PM GMT+05:30> <Info> <Management> <BEA-141107> <Version: WebLogic Server 8.1 S
P5 Mon Sep 19 23:06:54 PDT 2005 641358
WebLogic XMLX Module 8.1 SP5 Mon Sep 19 23:06:54 PDT 2005 641358 >
<Mar 21, 2006 5:25:50 PM GMT+05:30> <Info> <Configuration Management> <BEA-150015> <Connecting to th
e administration server http://sunert1.ad.infosys.com:7007 to retrieve the initial configuration.>
<Mar 21, 2006 5:25:54 PM GMT+05:30> <Notice> <Log Management> <BEA-170019> <The server log file /exp
ort/home/ngtyasqa/bea/user_projects/domains/mydomain/managedServer5/managedServer5.log is opened. Al
l server side log events will be written to this file.>
<Mar 21, 2006 5:26:03 PM GMT+05:30> <Critical> <WebLogicServer> <BEA-000364> <Server failed during i
nitialization. Exception:weblogic.security.service.SecurityServiceRuntimeException: [Security:090371
]Problem instantiating Authentication Provider weblogic.rmi.extensions.RemoteRuntimeException: Unexp
ected Exception - with nested exception:
[java.rmi.MarshalException: failed to marshal invoke(Ljavax.management.ObjectName;Ljava.lang.String;
[Ljava.lang.Object;[Ljava.lang.String;); nested exception is:
java.io.NotSerializableException: com.netegrity.siteminder.weblogic.sspi.auth.a9]
weblogic.security.service.SecurityServiceRuntimeException: [Security:090371]Problem instantiating Au
thentication Provider weblogic.rmi.extensions.RemoteRuntimeException: Unexpected Exception - with ne
sted exception:
[java.rmi.MarshalException: failed to marshal invoke(Ljavax.management.ObjectName;Ljava.lang.String;
[Ljava.lang.Object;[Ljava.lang.String;); nested exception is:
java.io.NotSerializableException: com.netegrity.siteminder.weblogic.sspi.auth.a9]
at weblogic.security.service.PrincipalAuthenticator.initialize(PrincipalAuthenticator.java:2
25)
at weblogic.security.service.PrincipalAuthenticator.<init>(PrincipalAuthenticator.java:283)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doATN(SecurityServiceManager
DelegateImpl.java:581)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealm(SecurityServ
iceManagerDelegateImpl.java:420)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.loadRealm(SecurityServiceMan
agerDelegateImpl.java:700)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealms(SecuritySer
viceManagerDelegateImpl.java:733)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceMa
nagerDelegateImpl.java:876)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:7
34)
at weblogic.t3.srvr.T3Srvr.initializeHere(T3Srvr.java:821)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:669)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:343)
at weblogic.Server.main(Server.java:32)
>
<Mar 21, 2006 5:26:03 PM GMT+05:30> <Emergency> <WebLogicServer> <BEA-000342> <Unable to initialize
the server: weblogic.security.service.SecurityServiceRuntimeException: [Security:090371]Problem inst
antiating Authentication Provider weblogic.rmi.extensions.RemoteRuntimeException: Unexpected Excepti
on - with nested exception:
[java.rmi.MarshalException: failed to marshal invoke(Ljavax.management.ObjectName;Ljava.lang.String;
[Ljava.lang.Object;[Ljava.lang.String;); nested exception is:
java.io.NotSerializableException: com.netegrity.siteminder.weblogic.sspi.auth.a9]>
The WebLogic Server did not start up properly.
weblogic.security.service.SecurityServiceRuntimeException: [Security:090371]Problem instantiating Au
thentication Provider weblogic.rmi.extensions.RemoteRuntimeException: Unexpected Exception - with ne
sted exception:
[java.rmi.MarshalException: failed to marshal invoke(Ljavax.management.ObjectName;Ljava.lang.String;
[Ljava.lang.Object;[Ljava.lang.String;); nested exception is:
java.io.NotSerializableException: com.netegrity.siteminder.weblogic.sspi.auth.a9]
at weblogic.security.service.PrincipalAuthenticator.initialize(PrincipalAuthenticator.java:2
25)
at weblogic.security.service.PrincipalAuthenticator.<init>(PrincipalAuthenticator.java:283)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doATN(SecurityServiceManager
DelegateImpl.java:581)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealm(SecurityServ
iceManagerDelegateImpl.java:420)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.loadRealm(SecurityServiceMan
agerDelegateImpl.java:700)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealms(SecuritySer
viceManagerDelegateImpl.java:733)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceMa
nagerDelegateImpl.java:876)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:7
34)
at weblogic.t3.srvr.T3Srvr.initializeHere(T3Srvr.java:821)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:669)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:343)
at weblogic.Server.main(Server.java:32)
Reason: weblogic.security.service.SecurityServiceRuntimeException: [Security:090371]Problem instanti
ating Authentication Provider weblogic.rmi.extensions.RemoteRuntimeException: Unexpected Exception -
with nested exception:
[java.rmi.MarshalException: failed to marshal invoke(Ljavax.management.ObjectName;Ljava.lang.String;
[Ljava.lang.Object;[Ljava.lang.String;); nested exception is:
java.io.NotSerializableException: com.netegrity.siteminder.weblogic.sspi.auth.a9]
Thanks and Regards,
Shefali -
Problem while starting managed server using nodemanager
Hi everyone,
I am using WLST of Weblogic server 10.3, to automate the creation of domain, managed servers,JDBC,JMS resources etc.. and trying to start the managed servers using node manager. I have an environment which contains few domains. All the domains are using machine named "X".
Now, i am creating the same machine in my domain WLSTDomain. I have the following doubts.
Is there a way to check whether the nodemanager(of X) is already running.
If there is a way to check that, how can we start the managed servers in WLSTDomain using that existing nodemanager.1. yes you can check if the nodemanage is running using the following ways.
For linux env:-
a. Check if the JAVA process for nodemanager is running ps -ef | grep java and see the nodemanager process else /usr/sbin/lsof -i:$port (port of nodemanager).
b. Login to Admin Console --> Environment --> Machines --> Click on Machines --> Nodemanager --> Monitoring will give you nodemanager status from Admin console.
c. use nm() command with WLST
Example:
wls:/mydomain/serverConfig> nm()
Currently connected to Node Manager that is monitoring the domain "mydomain"
wls:/mydomain/serverConfig> nm()
Not connected to any Node Manager
wls:/mydomain/serverConfig>
To see if WLST connects to nodemanager or not?
help('nmLog') --> to check the nm logs
2. To start the nodemanager using WLST here are the commands
Example:
For single managed Server
wls:/mydomain/serverConfig> start('myserver', 'Server', block='false')
Starting server 'myserver' ...
The server 'myserver' started successfully.
wls:/mydomain/serverConfig>
For Cluster
wls:/mydomain/serverConfig> start('mycluster', 'Cluster')
Starting the following servers in Cluster, mycluster: MS1, MS2, MS3...
All servers in the cluster mycluster are started successfully.
wls:/mydomain/serverConfig> -
Has anyone managed to setup a WLS 7.0 Active Directory authenticator and booted
a managed server using the node manager? I can boot the server without the AD
authenticator and I can also boot the server using a script and successfully authenticate
through AD. My AD control flag is set to OPTIONAL and I have also setup a default
authenticator to boot weblogic - the control flag here is set to SUFFICIENT. This
configuration works fine with weblogic running on W2K, but not on Solaris (it
looks like the control flag is being ignored). Errors as follows
####<Oct 1, 2002 1:59:08 PM BST> <Info> <Logging> <mymachine> <server01> <main>
<kernel identity> <> <000000> <FileLo
gger Opened at /opt/app/live/appserver/domains/test/NodeManager/server01/server01.log>
####<Oct 1, 2002 1:59:09 PM BST> <Info> <socket> <mymachine> <server01> <main>
<kernel identity> <> <000415> <System
has file descriptor limits of - soft: 1,024, hard: 1,024>
####<Oct 1, 2002 1:59:09 PM BST> <Info> <socket> <mymachine> <server01> <main>
<kernel identity> <> <000416> <Using e
ffective file descriptor limit of: 1,024 open sockets/files.>
####<Oct 1, 2002 1:59:09 PM BST> <Info> <socket> <mymachine> <server01> <main>
<kernel identity> <> <000418> <Allocat
ing: 3 POSIX reader threads>
####<Oct 1, 2002 1:59:19 PM BST> <Critical> <WebLogicServer> <mymachine> <server01>
<main> <kernel identity> <> <0003
64> <Server failed during initialization. Exception:weblogic.security.service.SecurityServiceRuntimeException:
Problem instantiating
Authentication Providerjavax.management.RuntimeOperationsException: RuntimeException
thrown by the getAttribute method of the Dynam
icMBean for the attribute Credential>
weblogic.security.service.SecurityServiceRuntimeException: Problem instantiating
Authentication Providerjavax.management.RuntimeOper
ationsException: RuntimeException thrown by the getAttribute method of the DynamicMBean
for the attribute Credential
at weblogic.security.service.PrincipalAuthenticator.initialize(PrincipalAuthenticator.java:186)
at weblogic.security.service.PrincipalAuthenticator.<init>(PrincipalAuthenticator.java:236)
at weblogic.security.service.SecurityServiceManager.doATN(SecurityServiceManager.java:1506)
at weblogic.security.service.SecurityServiceManager.initializeRealm(SecurityServiceManager.java:1308)
at weblogic.security.service.SecurityServiceManager.loadRealm(SecurityServiceManager.java:1247)
at weblogic.security.service.SecurityServiceManager.initializeRealms(SecurityServiceManager.java:1364)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:1107)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
at weblogic.Server.main(Server.java:31)
####<Oct 1, 2002 1:59:19 PM BST> <Emergency> <WebLogicServer> <mymachine> <server01>
<main> <kernel identity> <> <000
342> <Unable to initialize the server: Fatal initialization exception
Throwable: weblogic.security.service.SecurityServiceRuntimeException: Problem
instantiating Authentication Providerjavax.management.
RuntimeOperationsException: RuntimeException thrown by the getAttribute method
of the DynamicMBean for the attribute Credential
weblogic.security.service.SecurityServiceRuntimeException: Problem instantiating
Authentication Providerjavax.management.RuntimeOper
ationsException: RuntimeException thrown by the getAttribute method of the DynamicMBean
for the attribute Credential
at weblogic.security.service.PrincipalAuthenticator.initialize(PrincipalAuthenticator.java:186)
at weblogic.security.service.PrincipalAuthenticator.<init>(PrincipalAuthenticator.java:236)
at weblogic.security.service.SecurityServiceManager.doATN(SecurityServiceManager.java:1506)
at weblogic.security.service.SecurityServiceManager.initializeRealm(SecurityServiceManager.java:1308)
at weblogic.security.service.SecurityServiceManager.loadRealm(SecurityServiceManager.java:1247)
at weblogic.security.service.SecurityServiceManager.initializeRealms(SecurityServiceManager.java:1364)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:1107)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
at weblogic.Server.main(Server.java:31)Solved the problem. The 'domain root' directory specified in the remote start configuration,
must contain a copy of the file 'SerializedSystemIni.dat' that was created along
with the domain, in order to boot when an AD authenticator is configured. If an
AD authenticator is not configured, no file is required. This was not a platform
specific issue; on Win2K I had configured the 'domain root' remote start parameter
to point to an existing domain root and not a new directory.
"Andrew Walker" <[email protected]> wrote:
>
Has anyone managed to setup a WLS 7.0 Active Directory authenticator
and booted
a managed server using the node manager? I can boot the server without
the AD
authenticator and I can also boot the server using a script and successfully
authenticate
through AD. My AD control flag is set to OPTIONAL and I have also setup
a default
authenticator to boot weblogic - the control flag here is set to SUFFICIENT.
This
configuration works fine with weblogic running on W2K, but not on Solaris
(it
looks like the control flag is being ignored). Errors as follows
####<Oct 1, 2002 1:59:08 PM BST> <Info> <Logging> <mymachine> <server01>
<main>
<kernel identity> <> <000000> <FileLo
gger Opened at /opt/app/live/appserver/domains/test/NodeManager/server01/server01.log>
####<Oct 1, 2002 1:59:09 PM BST> <Info> <socket> <mymachine> <server01>
<main>
<kernel identity> <> <000415> <System
has file descriptor limits of - soft: 1,024, hard: 1,024>
####<Oct 1, 2002 1:59:09 PM BST> <Info> <socket> <mymachine> <server01>
<main>
<kernel identity> <> <000416> <Using e
ffective file descriptor limit of: 1,024 open sockets/files.>
####<Oct 1, 2002 1:59:09 PM BST> <Info> <socket> <mymachine> <server01>
<main>
<kernel identity> <> <000418> <Allocat
ing: 3 POSIX reader threads>
####<Oct 1, 2002 1:59:19 PM BST> <Critical> <WebLogicServer> <mymachine>
<server01>
<main> <kernel identity> <> <0003
64> <Server failed during initialization. Exception:weblogic.security.service.SecurityServiceRuntimeException:
Problem instantiating
Authentication Providerjavax.management.RuntimeOperationsException:
RuntimeException
thrown by the getAttribute method of the Dynam
icMBean for the attribute Credential>
weblogic.security.service.SecurityServiceRuntimeException: Problem instantiating
Authentication Providerjavax.management.RuntimeOper
ationsException: RuntimeException thrown by the getAttribute method of
the DynamicMBean
for the attribute Credential
at weblogic.security.service.PrincipalAuthenticator.initialize(PrincipalAuthenticator.java:186)
at weblogic.security.service.PrincipalAuthenticator.<init>(PrincipalAuthenticator.java:236)
at weblogic.security.service.SecurityServiceManager.doATN(SecurityServiceManager.java:1506)
at weblogic.security.service.SecurityServiceManager.initializeRealm(SecurityServiceManager.java:1308)
at weblogic.security.service.SecurityServiceManager.loadRealm(SecurityServiceManager.java:1247)
at weblogic.security.service.SecurityServiceManager.initializeRealms(SecurityServiceManager.java:1364)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:1107)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
at weblogic.Server.main(Server.java:31)
####<Oct 1, 2002 1:59:19 PM BST> <Emergency> <WebLogicServer> <mymachine>
<server01>
<main> <kernel identity> <> <000
342> <Unable to initialize the server: Fatal initialization exception
Throwable: weblogic.security.service.SecurityServiceRuntimeException:
Problem
instantiating Authentication Providerjavax.management.
RuntimeOperationsException: RuntimeException thrown by the getAttribute
method
of the DynamicMBean for the attribute Credential
weblogic.security.service.SecurityServiceRuntimeException: Problem instantiating
Authentication Providerjavax.management.RuntimeOper
ationsException: RuntimeException thrown by the getAttribute method of
the DynamicMBean
for the attribute Credential
at weblogic.security.service.PrincipalAuthenticator.initialize(PrincipalAuthenticator.java:186)
at weblogic.security.service.PrincipalAuthenticator.<init>(PrincipalAuthenticator.java:236)
at weblogic.security.service.SecurityServiceManager.doATN(SecurityServiceManager.java:1506)
at weblogic.security.service.SecurityServiceManager.initializeRealm(SecurityServiceManager.java:1308)
at weblogic.security.service.SecurityServiceManager.loadRealm(SecurityServiceManager.java:1247)
at weblogic.security.service.SecurityServiceManager.initializeRealms(SecurityServiceManager.java:1364)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:1107)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
at weblogic.Server.main(Server.java:31) -
Problem starting managed server.
Hi,
I have my weblogic server running on UNIX server which has 2 users (UserA and UserB). The Admin server has been started with UserA and the nodemanager with UserB. I have 3 clusters with 2 managed servers each configured in my server. When i start my managed servers from my console 2 clusters (i.e. 4 managed servers have started) but only 1 cluster failed to start throwing the following error.
<Sep 26, 2009 8:41:29 AM GMT> <Error> <Security> <BEA-090033> <Failed to Switch to User UserA java.lang.IllegalArgumentException: Cannot seteuid("UserA"), system error: 'Not owner'
at weblogic.platform.Unix.setEUser0(Native Method)
at weblogic.platform.Unix.setEffectiveUser(Unix.java:49)
at weblogic.t3.srvr.SetUIDManager.switchEffectiveUser(SetUIDManager.java:178)
at weblogic.t3.srvr.SetUIDManager.makeUnprivileged(SetUIDManager.java:104)
at weblogic.t3.srvr.T3Srvr.initializeHere(T3Srvr.java:777)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:669)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:343)
at weblogic.Server.main(Server.java:32)
.>
Kindly help me with this issue. i wonder why only 1 cluster failed?
Thanks,
Tom
Edited by: user11949331 on Sep 28, 2009 4:24 AMManish, Thanks for your response.
The issue is resolved. The problem seems to be with the privilege.
Whenever i start the Managed server the owner of the Managed server's directory is "UserB" whereas all other files and directories in the domain dir have "UserA" as owner.
So i changed the owner of all the files and dir in the domain directory to "UserA" and tried starting the managed server from command line and it worked.
Thanks,
Tom. -
Problems starting Managed Server on WL6.0 Solaris
Hi,
I installed a WL6.0 on Solaris 8. Everythings works fine.
I careated a Domain and an additional Server wich is located at a
different machine. As is start this managed server on the other machine
it complains with the following error message:
<Aug 30, 2001 12:41:18 PM CEST> <Info> <Security> <Getting boot password
from user.>
Enter password to boot WebLogic server:weblogic
Starting WebLogic Server ....
Connecting to http://sol23:7001...
The WebLogic Server did not start up properly.
Exception raised:
weblogic.management.configuration.ConfigurationException: paros not
found
weblogic.management.configuration.ConfigurationException: paros not
found
at
weblogic.management.Admin.getBootstrapLocalServer(Admin.java:927)
at weblogic.management.Admin.initialize(Admin.java:287)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:317)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:169)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
In the access-Log of the Admin-Server the following line appears
my IP - - [30/Aug/2001:12:41:13 +0200] "GET
/wl_management_internal2/Bootstrap HTTP/1.0" 404 0
So my question: Where does this "wl_management_internal2" Application
come from?
Do I have to install some special things when I start an Admin-Server?
thanks
Falko Zurell . Webmaster
Pixelpark AG . http://www.pixelpark.com
Rotherstrasse 8 . 10245 Berlin . Germany
phone: + 49 30 5058 - 1963 . fax: -1600Hi Falko,
This is not a problem. when you want to add a new managed server to the
admin server, you need to use weblogic console to create that server in the
admin server first, then start the managed server with that name to connect
to the admin server. That is like you have to let the admin server know
there is such a server, then let it join to the Admin server. you can do
that by using the admin console, from left panel, click on Servers -->
"Create a new server" and name it to be "paros", specify the port and IP.
and hit "create". then start the managed server.
Thanks
Yu
"Falko Zurell" <[email protected]> wrote in message
news:[email protected]...
Hi,
I installed a WL6.0 on Solaris 8. Everythings works fine.
I careated a Domain and an additional Server wich is located at a
different machine. As is start this managed server on the other machine
it complains with the following error message:
<Aug 30, 2001 12:41:18 PM CEST> <Info> <Security> <Getting boot password
from user.>
Enter password to boot WebLogic server:weblogic
Starting WebLogic Server ....
Connecting to http://sol23:7001...
The WebLogic Server did not start up properly.
Exception raised:
weblogic.management.configuration.ConfigurationException: paros not
found
weblogic.management.configuration.ConfigurationException: paros not
found
at
weblogic.management.Admin.getBootstrapLocalServer(Admin.java:927)
at weblogic.management.Admin.initialize(Admin.java:287)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:317)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:169)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
>
In the access-Log of the Admin-Server the following line appears
my IP - - [30/Aug/2001:12:41:13 +0200] "GET
/wl_management_internal2/Bootstrap HTTP/1.0" 404 0
So my question: Where does this "wl_management_internal2" Application
come from?
Do I have to install some special things when I start an Admin-Server?
thanks
Falko Zurell . Webmaster
Pixelpark AG . http://www.pixelpark.com
Rotherstrasse 8 . 10245 Berlin . Germany
phone: + 49 30 5058 - 1963 . fax: -1600 -
Problem starting managed server in Cluster
Hi,
I'm using cluster with 2 managed server. other managed server2 is runing ok in the cluster now when I am starting managed server1 in a cluster this error is coming
The WebLogic Server encountered a critical failure
Reason: Assertion violated
Exception in thread "main" java.lang.NoClassDefFoundError
at weblogic.protocol.ServerIdentityManager.findServerIdentity(ServerIdentityManager.java:65)
at weblogic.protocol.URLManager.findAdministrationURL(URLManager.java:170)
at weblogic.server.ServerLifeCycleRuntime.getLifeCycleOperationsRemote(ServerLifeCycleRuntime.java:677)
at weblogic.t3.srvr.ServerRuntime.sendStateToAdminServer(ServerRuntime.java:406)
at weblogic.t3.srvr.ServerRuntime.updateRunState(ServerRuntime.java:392)
at weblogic.t3.srvr.T3Srvr.setState(T3Srvr.java:172)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:373)
at weblogic.Server.main(Server.java:67)
Could you pl tell the reason of this error?
Thanks in advance
Hi,
Can anybody help?
Edited by: user10680571 on Dec 4, 2008 4:42 AMThanks David.
During starting this managed server in cluster when I do tail -f <log_file_name> I can see this error message. But this message I can't see in log however ending log details- Is this something related with CLASSPATH problem?
<04-Dec-2008 10:11:18 o'clock GMT> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to t
he end of the classpath:
/software/bea/wls/920/weblogic92/platform/lib/p13n/p13n-schemas.jar:/software/bea/wls/920/weblogic92/platform/lib/p13n/p13n_c
ommon.jar:/software/bea/wls/920/weblogic92/platform/lib/p13n/p13n_system.jar:/software/bea/wls/920/weblogic92/platform/lib/wl
p/netuix_common.jar:/software/bea/wls/920/weblogic92/platform/lib/wlp/netuix_schemas.jar:/software/bea/wls/920/weblogic92/pla
tform/lib/wlp/netuix_system.jar:/software/bea/wls/920/weblogic92/platform/lib/wlp/wsrp-common.jar>
<04-Dec-2008 10:11:21 o'clock GMT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Serve
r VM Version 1.5.0_07-b03 from Sun Microsystems Inc.>
<04-Dec-2008 10:11:33 o'clock GMT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 9.2 Fri Jun 23 20:47:26 EDT 20
06 783464 >
<04-Dec-2008 10:12:06 o'clock GMT> <Info> <WebLogicServer> <BEA-000215> <Loaded License : /software/bea/wls/920/license.bea>
<04-Dec-2008 10:12:06 o'clock GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<04-Dec-2008 10:12:06 o'clock GMT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<04-Dec-2008 12:12:26 o'clock GMT> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to t
he end of the classpath:
/software/bea/wls/920/weblogic92/platform/lib/p13n/p13n-schemas.jar:/software/bea/wls/920/weblogic92/platform/lib/p13n/p13n_c
ommon.jar:/software/bea/wls/920/weblogic92/platform/lib/p13n/p13n_system.jar:/software/bea/wls/920/weblogic92/platform/lib/wl
p/netuix_common.jar:/software/bea/wls/920/weblogic92/platform/lib/wlp/netuix_schemas.jar:/software/bea/wls/920/weblogic92/pla
tform/lib/wlp/netuix_system.jar:/software/bea/wls/920/weblogic92/platform/lib/wlp/wsrp-common.jar>
<04-Dec-2008 12:12:35 o'clock GMT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Serve
r VM Version 1.5.0_07-b03 from Sun Microsystems Inc.>
<04-Dec-2008 12:13:03 o'clock GMT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 9.2 Fri Jun 23 20:47:26 EDT 20
06 783464 >
<04-Dec-2008 12:13:56 o'clock GMT> <Info> <WebLogicServer> <BEA-000215> <Loaded License : /software/bea/wls/920/license.bea>
<04-Dec-2008 12:13:58 o'clock GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<04-Dec-2008 12:14:00 o'clock GMT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<05-Dec-2008 06:21:55 o'clock GMT> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to t
he end of the classpath:
/software/bea/wls/920/weblogic92/platform/lib/p13n/p13n-schemas.jar:/software/bea/wls/920/weblogic92/platform/lib/p13n/p13n_c
ommon.jar:/software/bea/wls/920/weblogic92/platform/lib/p13n/p13n_system.jar:/software/bea/wls/920/weblogic92/platform/lib/wl
p/netuix_common.jar:/software/bea/wls/920/weblogic92/platform/lib/wlp/netuix_schemas.jar:/software/bea/wls/920/weblogic92/pla
tform/lib/wlp/netuix_system.jar:/software/bea/wls/920/weblogic92/platform/lib/wlp/wsrp-common.jar>
<05-Dec-2008 06:21:57 o'clock GMT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Serve
r VM Version 1.5.0_07-b03 from Sun Microsystems Inc.>
<05-Dec-2008 06:22:04 o'clock GMT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 9.2 Fri Jun 23 20:47:26 EDT 20
06 783464 >
<05-Dec-2008 06:22:23 o'clock GMT> <Info> <WebLogicServer> <BEA-000215> <Loaded License : /software/bea/wls/920/license.bea>
<05-Dec-2008 06:22:23 o'clock GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<05-Dec-2008 06:22:23 o'clock GMT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
Thanks for your help..... -
ClassNotFoundException When Starting Managed Server with NodeManager
Hi Experts,
ENV:
Weblogic Server 10.3.3
Webcenter 11.1.1.3
My managed server can be brought up correctly by stopManagedWebLogic.sh <ManagedServerName>. But when trying to start them up, app on that server can not run correctly, and node manager log complained that below classes are not found:
oracle.jrf.wls.JRFStartup
oracle.security.jps.wls.JpsWlsStartupClass
oracle.core.ojdl.weblogic.ODLConfiguration
oracle.jrf.AppContextStartup
oracle.ias.cache.Startup
oracle.dms.wls.DMSStartup
My Nodemanager is setup following instructions in OBE.Administering Managed Servers by Using the Node Manager(http://www.oracle.com/technology/obe/fusion_middleware/wls103/installconfig/admin_mngd_srvr/admin_ms_using_nm.htm#t4). Output javaclaspath of setWLSEnv.sh has been copy&pasted to admin console->server->..->Server start->classpath
Thanks,
ToddTrying setting the property StartScriptEnabled=true instead of false.
You can change this in the nodemanager.properties file (usually located in the directory <middleware-home>/wlserver_10.3/common/nodemanager)
The classes are set in the startscripts, such as setDomainEnv, which is called by startWebLogic.
The latter script is set by default in the nodemanager.properties file, through the property StartScriptName=startWebLogic.cmd. -
Failes to start Managed server using Nodemanager from admin console
Hi
I have created the cluster using Weblogic version 9.2 MP3 with
Machine 1 --> Admin (AS) + Managed server (MS1)
Machine 2 --> Managed server(MS2)
All the servers(AS,MS1,MS2) are SSL configured to run in production mode.
Machine is associated with each managed server and node manager is up and running.
I have made Host name verification as "None"
When i start the MS 1 from admin console it comes up in running.However MS2 is not coming in running mode.
The server logs states that "Could not connect to admin server"
Cannot decrypt the password ,username and TrustKeyStorePrivatepassphrase.
Even when i write the clear text password and username in Server_Name/data/nodemanager/boot.properties,then also it throws the same error.
Node manager is not configured to SSL.
Any Clue what i am missing????Is your Machine #2 shown as "Reachable" in the admin console ( Machines -> Machine2 -> Monitoring )?
Does your managed server #2 have the same userid and password on its Server -> Configuration -> Server Start page ( UserName & Password fields ) as managed server #1?
Your boot.properties only needs 2 lines, like:
password=your plain text password
username=your plain text username -
Problem starting managed server using Node Manager/WL 7
I have just configured Node Manager for the first time to start a managed server,
following the documentation 'Managing Server Availability with Node Manager'. However
when I attempt to start the managed server from the Administration Console I always
get the following exception:
<Jul 10, 2002 1:59:29 PM EDT> <Info> <[email protected]:5555> <Starting
Server webdevDomain::apps ...>
<Jul 10, 2002 1:59:29 PM EDT> <Info> <[email protected]:5555> <BaseProcessControl:
saving process id of Weblogic Managed server 'apps', pid: 15094>
Starting WebLogic Server...
Connecting to http://198.242.140.49:17043...
<Jul 10, 2002 1:59:32 PM EDT> <Critical> <WebLogicServer> <000364> <Server failed
during initialization. Exception:weblogic.management.configuration.ConfigurationException:
Exception encountered connecting to http://198.242.140.49:17043/wl_management_internal2/Bootstrap
- with nested exception:
[java.io.StreamCorruptedException: InputStream does not contain a serialized object]
java.io.StreamCorruptedException: InputStream does not contain a serialized object
at java.io.ObjectInputStream.readStreamHeader(ObjectInputStream.java:844)
at java.io.ObjectInputStream.<init>(ObjectInputStream.java:163)
at weblogic.management.ManagedServerAdmin.bootstrapLocalServer(ManagedServerAdmin.java:212)
at weblogic.management.ManagedServerAdmin.initialize(ManagedServerAdmin.java:122)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:665)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
at weblogic.Server.main(Server.java:31)
But I am able to start the managed server using the startApps.sh script with no problems.
I am running WL 7 on Solaris 2.8. All processes are running on the same host.
Any help is appreciated!
JohnRe-installing WL Server 7.0.0.1 resolved this problem.
- John -
Cannot start Managed server from NodeManager
Hello All,
Software version installed:-
Oracle Jdeveloper 11.1.1.7
Weblogic 10.3.6
RCU:- 11.1.1.7
SOA suite:-11.1.1.7
OSB 11.1.1.7
OS windows 7 ultimate 64 bit
=====================
Sucessfully installed all the above software. I planned to install AIA Foundation Pack and for this i need to configure node manager do start
manage servers.
Node manager configuration sucessfully done by following @http://neeraj-soa-tips.blogspot.in/2010/06/part-1-how-to-configure-node-manager-to.html
after this i am see node manger status as reachable in weblogic console.
From admin console under servers control tab, i tried starting soa_server1 but i am getting below error in nodemanger window.
java.io.IOException: Cannot run program "E:\Oracle\MiddleWare\wlserver_10.3\comm
on\bin\bin\startWebLogic.cmd" (in directory "E:\Oracle\MiddleWare\wlserver_10.3\
common\bin"): CreateProcess error=2, The system cannot find the file specified
at java.lang.ProcessBuilder.start(ProcessBuilder.java:1041)
at weblogic.nodemanager.server.WLSProcessImpl.start(WLSProcessImpl.java:
44)
at weblogic.nodemanager.server.WLSProcess.startProcess(WLSProcess.java:1
94)
at weblogic.nodemanager.server.AbstractServerMonitor.startWLSProcess_inn
er(AbstractServerMonitor.java:419)
at weblogic.nodemanager.server.AbstractServerMonitor.startWLSProcess(Abs
tractServerMonitor.java:358)
at weblogic.nodemanager.server.AbstractServerMonitor.start(AbstractServe
rMonitor.java:103)
at weblogic.nodemanager.server.ServerMonitor.start(ServerMonitor.java:25
at weblogic.nodemanager.server.AbstractServerManager.startServer(Abstrac
tServerManager.java:210)
at weblogic.nodemanager.server.AbstractServerManager.start(AbstractServe
rManager.java:181)
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:23
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:609)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:121)
at weblogic.nodemanager.server.Handler.run(Handler.java:71)
at java.lang.Thread.run(Thread.java:744)
Caused by: java.io.IOException: CreateProcess error=2, The system cannot find th
e file specified
at java.lang.ProcessImpl.create(Native Method)
at java.lang.ProcessImpl.<init>(ProcessImpl.java:385)
at java.lang.ProcessImpl.start(ProcessImpl.java:136)
at java.lang.ProcessBuilder.start(ProcessBuilder.java:1022)
... 13 more
I request everyone that if any one has idea on the above error then please throw light on me , this issue is really annoying me.
Also to make sure i tried starting startManagedWebLogic.cmd and sucessfull can see soa_server1 in running state.Note that it is saying that it cannot the file
" Cannot run program "E:\Oracle\MiddleWare\wlserver_10.3\common\bin\bin\startWebLogic.cmd" (in directory "E:\Oracle\MiddleWare\wlserver_10.3\common\bin"): CreateProcess error=2, The system cannot find the file specified"
What is somewhat strange is that it is expecting startWebLogic to be present in ${WL_HOME}/common/bin/bin. The second /bin/ does not exist (well not in normal installations). Also the location of startWebLogic is odd, usually this should be present, in the ${DOMAIN_HOME}/bin directory. Could be there are some paths incorrect in JDeveloper.
Maybe you are looking for
-
Mail 6.6 no longer connects to Gmail
I use Apple Mail (I think version 6.6, whichever comes with MAC 10.8.5 on the MacBook Pro I bought in April) for accessing my Gmail accoun. Over the past weekend it stop sending out-going messages but was stil able to download and read new message; t
-
Dreamweaver CS 5.5 build error
When I try to build android apk I get this annoying error. Please help. Cloning seed app for Android <DW> set ANT_HOME=C:\Program Files (x86)\Adobe\Adobe Dreamweaver CS5.5\Configuration\NativeAppFramework\apache-ant set ANDROID_HOME=C:\Android\androi
-
Not displaying in 3 columns?
For the life of me, I can't figure out why this isn't outputting in 3 columns. It persists in displaying in a single column. Am I missing something obvious? <cfquery name="getproducts" datasource="wioDB"> SELECT P.ProdID, P.Designer, P.DressSize, P.P
-
MR 11 error message C+ 171
Hi Guys, I use MR11 and then I set the flag on chosen PO/item and post the system sends to me message C+ 171 'Error while determining the currency types for ..PO...item...)..Do you have any idea?I have searched in thsi forum and in OSS Note(740579,
-
Input-Readiness of Query with drill down
Hello experts, I've got an issue with the input readiness of a query. In the Query I use the characterisitc "Plan" as a drill-down-characterisitc. So I don't filter the query for the characterisitc 'plan' but I use it as drill-down-characterisitc, th