Problems starting network conection when installing Archlinux

Hi,
I have installed Arch, but can not install a desktop environment as my network is not up. I get the error messages 'failed to synchronize any databases' and 'transient resolver failure'. I tried different repository servers, but no luck, and then i tried ping google.com, and got 'unknown host'. I can ping 192.168.0.1. I have a broadband adsl router with an ethernet connection and a realtek ethernet card. I have never had any problems with any other distro, which all start the internet connection automatically (through DHCP i think).
So far, i have looked at /etc/resolve.conf, which was empty. I added
nameserver 192.168.0.1
(which ubuntu uses) and rebooted. I tried again with 192.168.0.0 and 192.168.0.2 and a combination of the above but still could not ping google.com. I have also looked at /etc/modprobe.conf, which was empty, and added
alias eth0 8139too
but still nothing. Is there anything else i could try? Thanks.

Arch does not automatically set everything up for you. Have you set up your networking in /etc/rc.conf? Post the relevant section and we can help fix it if necessary.
Here is the /etc/rc.conf section of the beginners guide: http://wiki.archlinux.org/index.php/Beg … .2Frc.conf
Last edited by Allan (2008-02-02 11:40:22)

Similar Messages

I have a problem with Apple store when installing large application: The system crashes. Any suggestion?

I have a problem with Apple store when installing large application (example xCode): The system crashes.
It begun with 10.8 usualy with few tries it work but with 4.6 no succes.
Any suggestion?

If you have more than one user account, you must be logged in as an administrator to carry out these instructions.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select the most recent panic log under System Diagnostic Reports. Post the entire contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

Problem with NEW H520 when installed new power supply & graphic card. Please help!

My H520 was working perfectly and was running FAST..especially when rebooting. ( It was AWESOME! )Then I installed a new power supply (Coolmax 400w) and a new graphic card (Sapphire Radeon HD6450) and then everything changed. Now my computer is booting very SLOWLY and all the programs are taking a long time to load too. I was getting a black screen for almost a full 2 minutes before the windows 8.0 screen would finally load up and then it hangs there for a few seconds and finally goes to the start screen in windows. But BEFORE I installed this new hardware, when I would reboot, I would see the Lenovo splash screen come up for a few short seconds and then it instantly went to the windows welcome screen. And even then I would barely have enough time to see the welcome screen before it instantly loaded into the windows start screen. Everything would load up fast on the desktop too and we'd be good to go. It all took about 30 SECONDS.
But now? It takes MINUTES to get everything going. After it FINALLY loads up (it takes almost 2 full minutes now!), everything hangs up. When you first click on the desktop, it takes a few seconds for all of the icons to pop up. Before I loaded the new hardware, everything loaded up instantly. I didn't even see the icons load because they were already there. But now I have to wait for them to load up before I can even see them. And it's like that with every program and web browser I try to use now. Everything hangs up at first and then finally loads. The programs work but they are sluggish.
So I uninstalled the new power supply and put back in the original 280w power supply and I took out the graphic card but it did no change. The machine is STILL running slow on everything it does and booting very slowly.
I have seen this problem mentioned elsewhere about Lenovo computers but there is never a solution. Please help! It took me a long time to save up for this computer and I have been babying it ever since. I will never be able to afford a new one or pay for tech repair. I need to fix this! I was so thrilled with this computer before the hardware upgrade. This is devastating to me that it is working so poorly now when all I was trying to do was upgrade it a little bit.    Now it's performing horribly and it's only 6 months old.
I ran a four hour test on the hard drive and it is fine. I ran all the system clean ups, optimizations, registry cleanups, windows disk cleaner, defragger and virus scans. Nothing is showing up as not working but there is CLEARLY a problem. It was never this slow.   And why is it STILL acting this slow even after I uninstalled all of the new hardware that made it start acting this way and went back to the original setup?
I'm trying to run a memory test on it now but the BIOS will NOT allow me to select another drive to boot from so I can't boot from the flash drive or CD drive to run the memory test. I have NO IDEA what to do next and I am starting to pull my hair out in frustration.
Please, is there anything that can be done to make it better again?
Any help would be HUGELY appreciated. Thank you!
Sincerely,
Jennifer

I totally give up!! I restored everything to the ORIGINAL state with drivers AND hardware and STILL everything is not working properly like it was BEFORE the upgrade.
So this has been the WORST experience with Tech support EVER!! I have spent DAYS on the phone for HOURS with these technicians and nobody seems to know what they are doing. They put me on hold every 10 minutes and are gone for 10 to 15 minutes and when they come back, they seem all set on a new solution but when you ask them questions about it, they have NO CLUE how to answer and then they put you on hold again. Nothing gets solved and after HOURS on the phone, I just tell them to stop because we are getting no where but running around in circles that make no sense. THIS A NIGHTMARE!!
So I totally gave up on being able to upgrade this machine. To any future buyers, I STRONGLY recommend you do all upgrading BEFORE you get it home for the first time. Make sure you have your power supply and graphic card INCLUDED before you bring it home or you're mostly likely going to have a NIGHTMARE upgrading it later.    Technical support is a HORROR STORY and expect to be WAITING for LOOOOONNNNG periods of time both ON THE PHONE and ONLINE and probably ending up with NO SOLUTION in the end.
I've VERY upset with how this turned out!! I'm just gonna have to deal with the fact that my computer is permenantly messed up and NOBODY AT LENOVO knows how to fix it. So I'm stuck.
I decided to send back the new power supply and the new graphic card because of this nightmare with tech support. I put everything back to the way it was when I bought the computer and it is STILL acting up!! I just want to revert it back to factory settings .. INCLUDING THE BIOS... but Lenovo said I have to send the WHOLE computer back to them to do that. All I can do from home is restore from a point in the hard drive and that's not enough. I need a TOTAL CLEAN INSTALL. Everything needs to be wiped out and reset, not just restored to a previous restore point. I've done this multiple times and all it does is erase all the programs and stuff I put on the computer. The drivers and other codes are still the same. And then bugs come up and things get all wonky. I NEVER HAD THIS PROBLEM BEFORE I TRIED TO UPGRADE IT!!
I am NOT comfortable with Lenovo's "solution". I do NOT want to send my computer back to them for them to reset it with factory disks ESPECIALLY when they stated that they are NOT responsible for any damage in transport or otherwise. I have to buy extra packaging to make sure it gets there safely. They told me to use the original box and packaging, that is the only way they can be sure it will get there safe. Who has the original stuffing SIX MONTHS LATER?!?! I don't want to be sending my computer across the country to get jostled all over the place and have that add to the slowness of the hardware because it was jostled.
Can't I reset it from home? Can they not send ME the disks instead of me sending my whole computer to them?
I'm so incredibly frustrated with this. I hope somebody answers quickly and that I don't have to wait DAYS to get a response again.
I absolutely LOVED my Lenovo computer! And then I tried to upgrade it. BIG MISTAKE!! Now everything is totally messed up and Lenovo's customer support for technical problems is HORRID!!
Somebody please help. This is driving me crazy with frustration and totally breaking my heart. It took me a VERY long time to save up for this computer and it was my most loved possession. It was a reward for a lot of hard times and now it's all broken and acting slow. And it's only 6 months old.
Is there a solution to this very frustrating problem?
I just want it to go back to the way it was before.
And is there a very low cost KNOWN TO WORK WITH THIS MACHINE upgraded graphic card and power supply? Is there a very specific brand and make? If so, could you let me know what it is in case I try to upgrade it again someday?
Thank you for your time and for reading this!
Please have a FANTASTIC day today!!
~Jennifer~

Wheres the old network documentation when installing from 2010 source?

wheres the old network style wiki resources for users who install from a 2010 source? Im installing from a 2010.05 core, and it uses the old network config in rc.conf.
example
#rc.conf
INTERFACES=(eth0)
eth0="dhcp"
gateway="default gw 192.168.1.254"
ROUTES=(!gateway)
#resolv.conf
nameserver=8.8.8.8
nameserver=8.8.4.4
i can ping my gateway and lan members, but i cant ping 8.8.8.8, so that makes sense why i cant ping google.com
am i just not adresing all the conf files, or is this a gateway issue? also, i couldnt get dhcp to work. I set it that way first, it wouldnt not grab an ip. Then once i set it static, and then back to dhcp, it reverts to the static ip either way.
[we really need a resource that shows up on a google search of "arch ROUTES(", or "arch ROUTES(!gateway)", or "arch INTERFACES=" because if users only have access to an older install source (i left my newer source at work, doh), we want them to be up and running, and updated right away]
Last edited by wolfdogg (2012-03-10 22:11:16)

wolfdogg wrote:[we really need a resource that shows up on a google search of "arch ROUTES(", or "arch ROUTES(!gateway)", or "arch INTERFACES=" because if users only have access to an older install source (i left my newer source at work, doh), we want them to be up and running, and updated right away]
Patches welcome :-)
https://wiki.archlinux.org/index.php?ti … did=111704 - it's not pretty, but you can look at the code:
==Networking==
* {{Codeline|[[HOSTNAME]]}}: Set this to the hostname of the machine, without the domain part. This is totally your choice, as long as you stick to letters, digits and a few common special characters like the dash. Don't be too creative here, though, and when in doubt, use the default.
* {{Codeline|INTERFACES}}: Here you define the settings for your networking interfaces. The default lines and the included comments explain the setup well enough. If you do not use DHCP to configure a device, just keep in mind that the value of the variable (whose name must be equal to the name of the device which is supposed to be configured) equals the line which would be appended to the {{Codeline|ifconfig}} command if you were to configure the device manually in the shell.
* {{Codeline|ROUTES}}: You can define your own static network routes with arbitrary names here. Look at the example for a default gateway to get the idea. Basically the quoted part is identical to what you'd pass to a manual route add command, therefore reading man route is recommended if you don't know what to write here, or simply leave this alone.
* {{Codeline|NETWORKS}}: This enables certain [[network profiles]] at boot-up. Network profiles provide a convenient way of managing multiple network configurations, and are intended to replace the standard {{Codeline|INTERFACES}}/{{Codeline|ROUTES}} setup that is still recommended for systems with only one network configuration. If your computer will be connecting to various networks at various times (e.g., a laptop) then you can configure profiles in the {{Filename|/etc/network.d}} directory. There are template files included in {{Filename|/etc/network.d/examples}} that can be used to create new profiles.
Remember to read all the news back to mid-2010: http://www.archlinux.org/news/

Problem with adobe reader when installing on mac book. "Internal error occured".

Both me and my friend installed Adobe reader on our mac books this week, and it doesn't work. The only thing that happens when we try to open the program is an text message with "Internal error occured". And that's it. The PDF-file is not the problem, and I have the latest version of Mac operating system, so that's not the problem eighter. Mac support told me to contact you. Please help me as soon as possible. Thanks! /Amanda

Hello,
Please try to download the new installer from this location and see if that works -Adobe - Adobe Reader download - All versions
~Deepak

Problem starting ASM instance after installing Oracle Grid standalone

Hi!
After installing Oracle Grid 11gr2 and rebooting my machine:
Linux localhost.localdomain 2.6.32-300.10.1.el5uek #1 SMP Wed Feb 22 17:37:40 EST 2012 x86_64 x86_64 x86_64 GNU/Linux
I run asmca command and it failed to startup ASM instance, I tried to paste the log but it's too long!
Could someone help me please! thank you very much!
José
I paste just the last piece:
+[main] [ 2012-03-15 15:01:56.853 CET ] [SQLEngine.initialize:354] m_bReaderStarted: false+
+[main] [ 2012-03-15 15:01:56.857 CET ] [SQLEngine.initialize:358] Starting Reader Thread...+
+[main] [ 2012-03-15 15:01:56.919 CET ] [UsmcaLogger.logExit:122] Exiting oracle.sysman.assistants.usmca.backend.USMInstance Method : createSQLEngine+
+[main] [ 2012-03-15 15:01:56.919 CET ] [OracleHome.getVersion:877] OracleHome.getVersion called. Current Version: null+
+[main] [ 2012-03-15 15:01:56.927 CET ] [InventoryUtil.getOUIInvSession:347] setting OUI READ level to ACCESSLEVEL_READ_LOCKLESS+
+[main] [ 2012-03-15 15:01:56.927 CET ] [OracleHome.getVersion:896] Homeinfo /u01/app/grid/product/11.2.0/grid,1+
+[main] [ 2012-03-15 15:01:56.928 CET ] [Version.isPre:274] version to be checked 11.2.0.1.0 major version to check against10+
+[main] [ 2012-03-15 15:01:56.928 CET ] [Version.isPre:285] isPre.java: Returning FALSE+
+[main] [ 2012-03-15 15:01:56.929 CET ] [OCR.loadLibrary:308]+
Inside constructor of OCR
+[main] [ 2012-03-15 15:01:56.929 CET ] [OCR.isCluster:939] Calling OCRNative for isCluster()+
+[main] [ 2012-03-15 15:01:56.930 CET ] [OCR.isCluster:943] OCR Result status = true+
+[main] [ 2012-03-15 15:01:56.930 CET ] [OCR.isCluster:955] Bolean result = false+
+[main] [ 2012-03-15 15:01:56.930 CET ] [Version.isPre:274] version to be checked 11.2.0.1.0 major version to check against10+
+[main] [ 2012-03-15 15:01:56.930 CET ] [Version.isPre:285] isPre.java: Returning FALSE+
+[main] [ 2012-03-15 15:01:56.931 CET ] [MessageBundle.getMessageFields:338] MessageBundle.getMessage() failed to load the string PRKC-PRKC-1036 : CRS_HOME name passed to the method was null Exception: java.util.MissingResourceException: Can't find resource for bundle oracle.ops.mgmt.resources.PrkcMsg, key PRKC-1036 : CRS_HOME name passed to the method was null+
+[main] [ 2012-03-15 15:01:56.931 CET ] [ClusterUtils.getCRSActiveVersion:1797] Error getting CRS active version: PRKC-PRKC-1036 : CRS_HOME name passed to the method was null : <null>+
+[main] [ 2012-03-15 15:01:56.931 CET ] [OracleHome.getVersion:903] OracleHome.CRSActiveVersion: null+
+[main] [ 2012-03-15 15:01:57.084 CET ] [OracleHome.getVersion:922] OracleHome.server.getVersion Version: 11.2.0.1.0+
+[main] [ 2012-03-15 15:01:57.084 CET ] [OracleHome.getVersion:943] Current Version From Inventory: 11.2.0.1.0+
+[main] [ 2012-03-15 15:01:57.084 CET ] [OracleHome.getVersion:948] using sqlplus: /u01/app/grid/product/11.2.0/grid/bin/sqlplus+
+[main] [ 2012-03-15 15:01:57.084 CET ] [UsmcaLogger.logInfo:141] Role SYSASM+
+[main] [ 2012-03-15 15:01:57.085 CET ] [UsmcaLogger.logInfo:141] OS Auth true+
+[main] [ 2012-03-15 15:01:57.182 CET ] [SQLEngine.done:2148] Done called+
+[main] [ 2012-03-15 15:01:57.183 CET ] [UsmcaLogger.logException:171] SEVERE:method oracle.sysman.assistants.usmca.backend.USMInstance:checkAndStartupInstance+
+[main] [ 2012-03-15 15:01:57.183 CET ] [UsmcaLogger.logException:172] ORA-01034: ORACLE not available+
+[main] [ 2012-03-15 15:01:57.183 CET ] [UsmcaLogger.logException:173] oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-01034: ORACLE not available+
oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1650)
oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeQuery(SQLEngine.java:823)
oracle.sysman.assistants.usmca.backend.USMInstance.checkAndStartupInstance(USMInstance.java:573)
oracle.sysman.assistants.usmca.backend.USMInstance.discoverASMInstance(USMInstance.java:340)
oracle.sysman.assistants.usmca.service.UsmcaService.discoverASMInstance(UsmcaService.java:146)
oracle.sysman.assistants.usmca.Usmca.execute(Usmca.java:230)
oracle.sysman.assistants.usmca.Usmca.main(Usmca.java:333)
+[main] [ 2012-03-15 15:01:57.184 CET ] [UsmcaLogger.logExit:122] Exiting oracle.sysman.assistants.usmca.backend.USMInstance Method : checkAndStartupInstance+
+[main] [ 2012-03-15 15:01:57.184 CET ] [UsmcaLogger.logInfo:141] ASM failed to start. Check /u01/app/grid/cfgtoollogs/asmca/asmca-1203153PM0138.log for details.+

Hi,
i've got similar problem but my asm is not just down. After installing grid home with infrastructure I've restarted os and there is no crs services and the only result from this command:
# ps -ef | grep grid
grid      2075     1 0 13:58 ?        00:00:00 /u01/app/grid/product/11.2.0/grid/bin/ohasd.bin reboot
root      2463 2439 0 14:06 pts/0    00:00:00 grep gridgive me opposite to this one before restart:
$ ps -ef | grep grid
grid      2076     1 0 13:01 ?        00:00:00 /u01/app/grid/product/11.2.0/grid/bin/ohasd.bin reboot
grid      3646     1 0 13:44 ?        00:00:04 /u01/app/grid/product/11.2.0/grid/bin/ohasd.bin reboot
grid      3806     1 0 13:45 ?        00:00:02 /u01/app/grid/product/11.2.0/grid/bin/oraagent.bin
grid      3820     1 0 13:45 ?        00:00:00 /u01/app/grid/product/11.2.0/grid/bin/evmd.bin
grid      3853 3820 0 13:45 ?        00:00:00 /u01/app/grid/product/11.2.0/grid/bin/evmlogger.bin -o /u01/app/grid/product/11.2.0/grid/evm/log/evmlogger.info -l /u01/app/grid/product/11.2.0/grid/evm/log/evmlogger.log
root      3879 2307 0 13:46 pts/0    00:00:00 su - grid
grid      3881 3879 0 13:46 pts/0    00:00:00 -bash
grid      4172     1 0 13:48 ?        00:00:00 /u01/app/grid/product/11.2.0/grid/bin/cssdagent
grid      4197     1 0 13:48 ?        00:00:00 /u01/app/grid/product/11.2.0/grid/bin/ocssd.bin
grid      4550     1 0 13:49 ?        00:00:00 asm_pmon_+ASM
grid      4552     1 0 13:49 ?        00:00:00 asm_psp0_+ASM
grid      4554     1 0 13:49 ?        00:00:02 asm_vktm_+ASM
grid      4558     1 0 13:49 ?        00:00:00 asm_gen0_+ASM
grid      4560     1 0 13:49 ?        00:00:00 asm_diag_+ASM
grid      4562     1 0 13:49 ?        00:00:00 asm_dia0_+ASM
grid      4564     1 0 13:49 ?        00:00:00 asm_mman_+ASM
grid      4566     1 0 13:49 ?        00:00:00 asm_dbw0_+ASM
grid      4568     1 0 13:49 ?        00:00:00 asm_lgwr_+ASM
grid      4570     1 0 13:49 ?        00:00:00 asm_ckpt_+ASM
grid      4572     1 0 13:49 ?        00:00:00 asm_smon_+ASM
grid      4574     1 0 13:49 ?        00:00:00 asm_rbal_+ASM
grid      4576     1 0 13:49 ?        00:00:00 asm_gmon_+ASM
grid      4578     1 0 13:49 ?        00:00:00 asm_mmon_+ASM
grid      4580     1 0 13:49 ?        00:00:00 asm_mmnl_+ASM
grid      4582     1 0 13:49 ?        00:00:00 oracle+ASM (DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
grid      6128     1 0 13:52 ?        00:00:00 /u01/app/grid/product/11.2.0/grid/bin/tnslsnr LISTENER -inherit
grid      6142 3881 0 13:53 pts/0    00:00:00 ps -ef
grid      6143 3881 0 13:53 pts/0    00:00:00 grep grid
$ srvctl status listener
Listener LISTENER is enabled
Listener LISTENER is running on node(s): pc
$ srvctl status asm
ASM is running on pcI'm using 2x 1TB hdisk as 2 pv in one vg. I thought that lvolume permissions are incorrect but now I had:
# ls -l /dev | grep dm
crw-rw---- 1 root root      10, 61 May 16 13:57 cpu_dma_latency
brw-rw---- 1 root disk     253,   0 May 16 13:57 dm-0
brw-rw---- 1 root disk     253,   1 May 16 13:57 dm-1
brw-rw---- 1 grid asmadmin 253, 10 May 16 13:57 dm-10
brw-rw---- 1 grid asmadmin 253, 11 May 16 13:57 dm-11
brw-rw---- 1 grid asmadmin 253, 12 May 16 13:57 dm-12
brw-rw---- 1 grid asmadmin 253, 13 May 16 13:57 dm-13
brw-rw---- 1 grid asmadmin 253,   2 May 16 13:57 dm-2
brw-rw---- 1 grid asmadmin 253,   3 May 16 13:57 dm-3
brw-rw---- 1 grid asmadmin 253,   4 May 16 13:57 dm-4
brw-rw---- 1 grid asmadmin 253,   5 May 16 13:57 dm-5
brw-rw---- 1 grid asmadmin 253,   6 May 16 13:57 dm-6
brw-rw---- 1 grid asmadmin 253,   7 May 16 13:57 dm-7
brw-rw---- 1 grid asmadmin 253,   8 May 16 13:57 dm-8
brw-rw---- 1 grid asmadmin 253,   9 May 16 13:57 dm-9and:
# ls -l /dev/vg_main/
total 0
lrwxrwxrwx 1 root root 7 May 16 13:57 asmlvol1 -> ../dm-2
lrwxrwxrwx 1 root root 8 May 16 13:57 asmlvol10 -> ../dm-11
lrwxrwxrwx 1 root root 8 May 16 13:57 asmlvol11 -> ../dm-12
lrwxrwxrwx 1 root root 8 May 16 13:57 asmlvol12 -> ../dm-13
lrwxrwxrwx 1 root root 7 May 16 13:57 asmlvol2 -> ../dm-3
lrwxrwxrwx 1 root root 7 May 16 13:57 asmlvol3 -> ../dm-4
lrwxrwxrwx 1 root root 7 May 16 13:57 asmlvol4 -> ../dm-5
lrwxrwxrwx 1 root root 7 May 16 13:57 asmlvol5 -> ../dm-6
lrwxrwxrwx 1 root root 7 May 16 13:57 asmlvol6 -> ../dm-7
lrwxrwxrwx 1 root root 7 May 16 13:57 asmlvol7 -> ../dm-8
lrwxrwxrwx 1 root root 7 May 16 13:57 asmlvol8 -> ../dm-9
lrwxrwxrwx 1 root root 8 May 16 13:57 asmlvol9 -> ../dm-10
lrwxrwxrwx 1 root root 7 May 16 13:57 lv01_swap -> ../dm-1
lrwxrwxrwx 1 root root 7 May 16 13:57 lv02_root -> ../dm-0I've used search path for ams disks as /dev/dm* and /dev/vg_main/asm* and seen all of them in both configurations.
I've tried to reconfigure HAS through (as root):
$GRID_HOME/crs/install/roothas.pl -deconfig -force -verbose
$GRID_HOME/root.shthis gave me working asm instance but after restart I'm in base position with no crs services.
And... I've tried to startup crs after restart with no luck but before restart I can shutdown everything and startup ASM instance too (so everything is fine till the reboot). I'm on CentOS 6:
$ uname -a
Linux pc 2.6.32-220.13.1.el6.x86_64 #1 SMP Tue Apr 17 23:56:34 BST 2012 x86_64 x86_64 x86_64 GNU/Linux
# cat /etc/issue
CentOS release 6.2 (Final)
Kernel \r on an \mAny hints about how to resolve this problem would be most welcome.
Regards.

Zen Micro problems. PC Reboots when installing Mediasou

I have problems installing mediasource on my PC as it reboots when trying to install it, and I have no idea what to do. My Zen Micro cannot connect to my PC and when trying to install the drivers manually it says I have to be logged in as administrator to install, and I double checked it... My accout gives me the administrators rights.... or so XP says.
I am not a total high tech. geek so please try and explain any advice thoroughly :-)
Cheers, Ronnie from Denmark

If your PC is rebooting with XP, then I would guess you have a hardware problem, or your installation of XP is screwed up (Usually a registry problem, or a bad third party driver).

PROBLEM WITH PT880 Neo WHEN INSTALL NEW 36GB RAPTOR SATA HD

I JUST BOUGHT NEW SYSTEM: PT880NEO, P4 3.2GHZ, 800MHZ, 512 KB L2 CACHE. I HAVE 2 PROBLEMS:
1. WHEN I INSTALLED BRAND NEW WD 200GB ULTRA ATA/100 WITH WINDOW XP PRO, XP ONLY REGCONIZED MY HARD DRIVE: 127 GB ONLY EVEN I CONNECTED MY HD THROUGH PROMISE ULTRA 100 PCI CARD.
2. WHEN I TRY TO INSTALL XP PRO ON THE OTHER BRAND NEW 36GB WD RAPTOR SATA, THE MOBO SYSTEM SAW THE HD BUT THE WINDOW XP DID NOT REGCONIZED MY SATA HD.
I REVIEWED SOME IDENTICAL PROBLEMS FROM THE FORUM BUT I AM STILL CONFUSING. ANYONE CAN SHOW ME EXACTLY WHAT SHOULD I DO. THANKS ALOT.

first things first, read the Moan Guide, and also check out the Rules Of The Forum as the forum users will reply more often and faster.
Hoping everything will boot up soon for ya.

How to deal with a shared network connection when installing 10 EX

I am in the process of setting up a Virtual PC XP environment on my Vista Business machine to load Oracle EX in the virtual environment. I am having an issue of receiving a shared network connection with my broadband wireless card within the virtual XP SP3 environment, which Internet access is required for the Oracle EX installation. I checked out a couple tech sites and could not find a solution. I might have to get an Internet access at home from TWC.
How to resolve this conflict? Thanks.
Edited by: user10368779 on Aug 27, 2009 2:09 PM

I am not sure how +"I am having an issue of receiving a shared network connection with my broadband wireless card within the virtual XP SP3 environment"+ can be resolved on an Oracle forum? There are probalby Windows experts on the forum but I would personally aim for a Windows forum.
You may want to double check if Oracle XE is even running in a Virtual PC environment before starting this exercise.
-Andyt

Problem with User settings when installing Adobe Creative Suite

Interesting problem which seems more related to the Mac OS than to the Adobe installer. Each time I tried to install the Suite I kept getting the error message: "Installer Failed to Initialize" immediately.
I tried the remedies on the Adobe website with no help.
Finally I found a discussion thread that suggested I try creating a new Administration User - log into that account and try installing the suite from there .
It worked like a charm and installed properly. Since the programs were installed in the Application folder I was able to switch back to MY User account and use the programs fine.
Can anyone hazard a guess as to what "evil" files in my Home folder caused this problem?
Could it happen to other program installations with similar files?
Thanks.

We cannot know. Your information is hugely insufficient. Check Your Windows Event Viewer and tell us the "fault module" plus provide detailed specs for your computer. Runtime errors usualyl mean that A DLL is missing, a security tool is blocking critical functions or that the processor is not compatible in teh first place. Just as well this could be a driver issue with your SATA bus or whatever.
Mylenium

Problem with license create when installing WEB AS 6.20

I'm getting the following error message when doing the install. I'm about 91% completed when this happens.
Info: InstController MakeStepsDeliver 2 718
Creating the SAP System License
Info: DBR3LICENSECREATE SyCoprocessCreate 2 718
Creating coprocess C:\MiniWAS\saplicense ...
Info: DBR3LICENSECREATE ExecuteDo 2 718
RC code form SyCoprocessWait = -112 .
Error: DBR3LICENSECREATE ExecuteCheck 2 718
Exit code from C:\MiniWAS\saplicense: -112.
Error: DBR3LICENSECREATE InternalInstallationDo 2 718
Phase failed.
Error: DBR3LICENSECREATE InstallationDo 2 718
Phase failed.
Error: Main {} 2 718
I'm on the internet when doing this. Are there some settings I have to change? I would appreciate any ideas on what is going on. Thank you.

Hi Steven,
Looks like the temporary license for 4 weeks during the
installation of WAS 620 is not being created.
This might help
http://help.sap.com/saphelp_webas620/helpdata/en/a7/512d23407a11d1893b0000e8323c4f/frameset.htm
Also you may as well want to check sapinst_dev.log, keydb.xml, control.xml, dev_slic etc.
Regards
Srikishan

What is this problem restarting my phone when installing software upgrade on iphone 4?

I cannot get my iphone 4 to restart.
I was installing a recommended software upgrade and when it completed the phone turned itself off but instead of restarting, it now has a screen with a apicture of an itunes icon and a connecting USB cable.
Can anyone help?

See this:
iOS: Unable to update or restore

"Failed start target server" when install LC ES Weblogic edition

Hi all ,
I am using the LC configure manager to start LC server.
Weblogic Admin server already started , but target server start failed.
I want to login to weblogic admin console , I try weblogic/weblogic ,but it failed ..
Does anyone here know the default user/pass for weblogic . I do remember that I haven't set any user/password for weblogic during the turnkey install
Thanks

Make sure you create JMX policies first : Adobe LiveCycle ES4 * 3.6 Creating JMX policies for database initialization
-Wasil

[Solved]Can't get past "Starting network" during installation from USB

I'm trying to do a fresh install of Archlinux on my laptop, following the Beginners Guide. However, I never get to the shell prompt because the installation gets stuck at "Starting network [Busy]".
These are steps I followed:
- I downloaded the latest Arch ISO.
- I wrote it to a usb stick ("Kingston Data Traveler") with "dd if=archlinux.iso of=/dev/sdb"
- I put the usb stick into my laptop (HP Pavilion dm1-4139sd), and booted it. I chose "x86_64". Everything seems to go fine, the only warning I get is: "microcode: failed to load file amd-ucode/microcode_amd.bin".
- I get the message "INIT: Entering runlevel: 3" and "Starting Syslog-NG [Done]", after that its endlessly (at least 20 minutes) stuck on "Starting network [Busy]".
I tried the following variations on the above:
- Wrote the ISO to a different USB, samen problem.
- Tried it with a different Arch version (from August), same problem.
- Turned kvm on and off, same problem.
- Pressed TAB at the "x86_64" line and added "acpi=off" to the end of it. I then get:
:: Triggering uevents....
[ 19.697932 ] usb 1-1: device not accepting address 2, error -110
:: Mounting '/dev/disk/by-label/ARCH_201209' to '/run/archiso/bootmnt'
Waiting 30 seconds for device /dev/disk/by-label/ARCH_201209
[ 35.312165 ] usb 1-1: device not accepting address 3, error -110
[ 45.821422 ] usb 1-1: device not accepting address 4, error -110
[ 56.330681 ] usb 1-1: device not accepting address 5, error -110
[ 56.330681 ] hub 1-0:1.0: unable to enumerate USB devices on port 1
ERROR: '/dev/disk/by-label/ARCH_201209' device did not show up after 30 seconds....
Falling back to interactive prompt
You can try to fix the problem manually, log out when you are finished
sh: can't access tty; job control turned off
[rootfs /]#
I'm not sure what to do in this prompt. At least the network isn't working and none of the normal commands.
- I reset the DHCP leases on my modem, same problem.
- I turned off/on the hardware WLAN, same problem.
- I tried it with or without the LAN cable plugged in, same problem.
- I tried it with or without the battery plugged in, and with or without the power cable plugged in. Same problem.
I also performed the Arch memory test, and the bios hard disk test. They both report no errors.
I did an Arch installation a month ago on this laptop, and back then it didn't have this problem. I still have that arch installed from back then and it boots/works without problem (I have Starting NetworkingManager [Done]). I know I technically don't need to install arch again, as I still have the old one, but I wanted to clean the changes I made to some settings files and I if it turns out this is some kind of hardware problem I'd like to return it to the store.
Please help! I'm not really that familiar with Linux in general, so it might have been a very basic mistake from me as well. I have no idea what to do next, except for formatting my harddisk (which I don't think should influence the installer?), or trying to install a different Linux distro.
Edit: The solution that solved this problem for me in the end was resetting the BIOS to its defaults.
Last edited by dbakker (2012-09-15 11:28:14)

DSpider wrote:Did you check the MD5 checksum? If you downloaded it using a BitTorrent client, then you don't need to (its hash is checked during downloading).
Yes, I downloaded it using BitTorrent and the MD5 matches.
DSpider wrote:Try a different stick?
Yes, I tried it with 2 different USB sticks. They are both from the same brand ("Kingston DataTraveler"), so I might try different brands as well, but I don't think it is the problem.
DSpider wrote:Or at least a different method from that wiki page. For example, "dd"-ing it should work just fine.
The methods for writing the ISO that I tried so far:
The base method:
dd if=archlinux.iso of=/dev/sdb
(from an Arch install)
The method without overwriting your USB drive (created a FAT32 drive with an VFAT filesystem, from an arch install)
Using Imagewriter (from Windows)
Each method gives the same result: the laptop gets stuck at "Starting network [Busy]" when booted from one of the USB sticks. My modem indicates that it "sees" the laptop, but that the laptop has no established connection. When the laptop is stuck at the "Starting network [Busy]", all the activity on the USB stick stops (the light stops flashing).
The thing I find most strange is that the OS currently installed on the laptop has no problems booting or accessing the internet (both wired and wireless) at all.

Starting nm-applet when I startx?

I'd like to be able to start network manager when i start x (in my case fluxbox)
right now, i have to manually type in:
sudo nm-applet
and it's quite a hassle

frewsxcv wrote:
n0dix wrote:
Fluxbox has a file to startup apps, .fluxbox/startup
Copy in it, this:
(sleep 1 && /usr/bin/nm-applet)
before exec fluxbox.
what does sleep 1 do?
EDIT: more importantly, it doesn't work since nm-applet requires administrative privileges
Wait for a second, then execute nm-applet. I supposed this execute nm-applet with sudo privileges. I mean, i don't have problems with nm-applet.
Try with the suggestion of @wonder first. If don't work try mine.
Last edited by n0dix (2010-03-15 23:32:49)

Problems starting network conection when installing Archlinux

Similar Messages

Maybe you are looking for