Problems synching with Nike + Server

After I end a workout, am I able to connect to the Nike server to transmit my workout data less than half of the time. The other times, I get an error message that the Nike server was unable to accept my data. This is totally glitchy! My iTunes is the most current available, and my iPod Nano is absolutely up to date.
I have tried creating a new Nike account and the same problems persist. Has anyone else experienced this and if so, how do I fix it? I'm frustrated!!!

Sounds like a problem with their website. You should contact them aboout it.
CG

Similar Messages

  • I am trying to look at my I cloud account on a pc in the library it normally works fine but now says problem connecting with the server. what can i do or is there an issue today

    I am trying to look at my I cloud account on a pc in the library it normally works fine but now says problem connecting with the server. what can i do or is there an issue today

    Hi...
    Try restarting the AMDS >  How to restart the Apple Mobile Device Service (AMDS) on Windows
    iCloud system status reports everything green >  Apple - System Status

  • Problems synching with Palm Tungsten T3

    I am having problems synching with my Palm Tungsten T3 datebook to Outlook 2003.  It was working up until about a week ago.  When I try to synch, it works for a few items and then I get the error message Pilot connector "Unable to read application data".  I click OK and then it finishes.  Below is the information I get in my log:
    HotSync operation started 07/29/08 15:21:15
    OK Expense
    OK Note Pad
    OK Voice Memo
    OK Photos
    Palm handheld database could not be opened (4004).
    Unable to communicate with Palm handheld (400D).
       -- Backing up db Bluetooth Trusted Devices to file C:\Program Files\Palm\PageT\Backup\Bluetooth_Trusted_Devices.PDB
       -- Backing up db Bluetooth Device Cache to file C:\Program Files\Palm\PageT\Backup\Bluetooth_Device_Cache.PDB
       -- Backing up db Saved Preferences to file C:\Program Files\Palm\PageT\Backup\Saved_Preferences.PRC
    OK System
    HotSync operation complete 07/29/08 15:22:20
    I use Intellisync Desktop and Windows XP.  I tried a soft reset with no luck. 
    Any help would be great!
    Thanks!
    Tammy
    Post relates to: Tungsten T3

    don't know if you can help.  i have a t-3 and when i last synced it erased all of my calander on both the device and my palm desktop.  the log said i had exceeded my file number and needed to erase some calander files and resynch.  tried but to no avail.  i can see folders in my palm program folder in windows i have calander backup data.  but i cannot import them under the file options from palm desktop program.  need some help please, i never knew before but do know now i should've backed up that data onto a cd or thumb drive.
    Post relates to: Tungsten T3

  • Had to restore ipod to factory settings child forgot passcode. did restore and trying to set up and keep receivng messagethere was a problem connecting with the server

    How do I fix this message. When trying to set up the  ipod again? There was a problem connecting with the server. please help

    Was this the error?
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

  • Mail app constantly synching with iCloud server after upgrade to Mavericks

    Since upgrading to Mavericks, Mail has been constantly synching with the iCloud server - and I mean constantly. I know this because I have the Activity window open. Consequently there is often a significant lag between clicking Send on a new message and it being sent, or new messages being downloaded. I have another iMac at my office and the same problem is being experienced there.
    I left the computer running all night to see if it would eventually sych everything, but it seems to be going in a constant cycle ever since the upgrade.
    If it means anything to anyone, the Console window displays a continuous stream of data similar to this:
    9:24:37.448 am fseventsd[48]: implementation_added_client : failed to add client for path /Users/Kevin/Library/Mail/V2/AosIMAP-kbish…
    9:24:37.449 am fseventsd[48]: implementation_register_rpc: implementation_added_client() => 22
    9:24:39.808 am fseventsd[48]: implementation_added_client : failed to add client for path /Users/Kevin/Library/Mail/V2/AosIMAP-kbish…
    9:24:39.809 am fseventsd[48]: implementation_register_rpc: implementation_added_client() => 22
    Can anyone offer any advice on what the problem might be and how I might fix it.
    Thanks,
    Kevin

    No solution here, but I have either the same or a similar problem. Apple Mail with Gmail (IMAP) used to work fine with Mavericks.
    Now with Yosemite most emails load ok, but some show the spinning wheel and "Loading..." message forever. These messages never load.
    I also have Thunderbird and it loads and shows these messages just fine. The messages that don't load in Mail are simple plain text messages so it's unrelated to complex attachments and such.
    Clearly something is broken in Yosemite that wasn't broken in Mavericks.

  • Complex problems synching with Tiger 1.4.3 upgrade

    After finally getting the courage to upgrade to Tiger on my iMac G4, I do have problems synching.
    I have a Zire 21 Palm. Nothing worked so I upgraded the Palm Desktop Software to 4.2.1 as required. Went to HotSync Conduit settings and enabled HotSynch for this Palm device. Opened iSynch, went through the enable Palm synching. Get the message to finish setting up your Palm OS device you need to select the HotSynch conduit in HotSynch Manager. (But I thought I already did that.) Anyway, I press the hot button, after a while it says connecting to Palm device, but the job never stops. I have to cancel, and no data has been transferred.
    I ALSO have an iPod. I explore this, I plug the iPod in after upgrading the iPod software as suggested. I set the contacts and calendars panel to synchronize (and to update podcasts, too), Now iTunes keeps telling me it's updating my calendar and contact information. It tells me this for over an hour. I have to go some where, I cancel, when I come back, it goes back to its labor. I don't think it should take this long.
    I also think the .Mac synching isn't working quite right, but I'll settle for a solution to the other problems.
    Bottom line, I still have no way to carry my calendar around with me. Help is needed.

    Ok, here is a copy of the iSynch log. I had never looked at this before.
    11:15:46 AM Connecting to Jim Andris
    11:15:46 AM Device "Jim Andris" connected
    11:22:09 AM Warning Device "Jim Andris" synchronization cancelled
    You suggest reconfigure iSync so that calendars and tasks are turned off - and contacts are turned on - without making any other configuration changes
    I went in and changed all other conduits in the Hotsync Manager to Do Nothing EXCEPT FOR iSync conduit, which is enabled.
    Then I unchecked the Calendars and checked Contacts on the Zire 21 menu on the iSync panel. I pressed the hot button on the Zire at 9:23 am. It said “Connecting Jim Andris” (which is my user id) Then it switched to just Connecting… It is just spinning with about a tenth of the bar in blue.
    Later (10:15 am)
    In the Zire 21 log it says
    Last HotSync operation
    11/16/05 9:29 am
    iSync conduit synchronization failed.
    Here is the message in the Desktop Palm Log
    HotSync 3.2 started 11/16/05 9:22:46 AM
    Local Synchronization
    Install did nothing
    iSync Conduit starting 11/16/05 9:22:48 AM
    Timeout waiting for Sync Engine, exiting 11/16/05 9:29:07 AM
    iSync Conduit: received NULL message, disconnecting... 11/16/05 9:29:07 AM
    iSync Conduit synchronization failed
    “iSync Conduit” failed (error = #-1)
    Voice Memo did nothing
    SplashShopper did nothing
    SplashPhoto did nothing
    SplashMoney did nothing
    SplashID did nothing
    Media did nothing
    Note Pad did nothing
    Memos did nothing
    Memo Pad did nothing
    Install did nothing
    Backup did nothing
    Last sync time and PC ID updated on handheld
    HotSync Complete 11/16/05 9:29:09 AM
    Here is the message in the iSync log
    Wednesday, November 16, 2005 9:22:50 AM CST
    9:22:50 AM Connecting to Jim Andris
    9:22:50 AM Device "Jim Andris" connected
    9:30:00 AM Receiving changes from "Jim Andris".
    9:30:09 AM "Jim Andris" finished receiving changes
    9:30:12 AM "Jim Andris" Processing changes...
    9:30:12 AM "Jim Andris" engine processing complete
    9:30:12 AM Applying changes to "Jim Andris"
    9:30:15 AM Device "Jim Andris" connected
    9:30:15 AM Receiving changes from "Jim Andris".
    9:30:15 AM "Jim Andris" Processing changes...
    9:30:15 AM "Jim Andris" engine processing complete
    9:30:15 AM Applying changes to "Jim Andris"
    9:30:15 AM Device "Jim Andris" synchronization complete
    9:22:50 AM Connecting to Jim Andris
    9:22:50 AM Device "Jim Andris" connected
    9:30:00 AM Receiving changes from "Jim Andris".
    9:30:09 AM "Jim Andris" finished receiving changes
    9:30:12 AM "Jim Andris" Processing changes...
    9:30:12 AM "Jim Andris" engine processing complete
    9:30:12 AM Applying changes to "Jim Andris"
    9:30:15 AM Device "Jim Andris" connected
    9:30:15 AM Receiving changes from "Jim Andris".
    9:30:15 AM "Jim Andris" Processing changes...
    9:30:15 AM "Jim Andris" engine processing complete
    9:30:15 AM Applying changes to "Jim Andris"
    9:30:15 AM Device "Jim Andris" synchronization complete

  • Just resolved Back to my Mac issue called Apple Suppport in the UK and they were really helpful if the error DNS server not responding the problem is with Apple server not your server ( I had tried to reboot by router, restart my laptop etc.

    I was having problem with my Back to my Mac as message was saying DNS Server not responding . I tried to turn my WIFI off, then my router  to no avail. Decided to call Apple Support line in the UK . I got a call back immediatly and great support.  The advisor took over my screen and we check that my laptop was synchronising   with I phots and it was.  The adviser also told that when the message DNS server is not responding next to Back to my Mac is has to do with Apple Server not mine , router etc... Hope this save others some time! Rather than spending time truining on and off changing IP address etc...

    Thanks for your thorough post. I too need to use BTMM on almost a daily basis for my job, and it has fallen short countlness times. I too have taken great pains to check all of the typical trouble shooting steps within iCloud and in the Apple keychain on each Mac etc, but after the latest rounds of system updates from Apple a few weeks ago to Mountain Lion, BTMM on one of my Macs is completely broken and unusable. I would concur that if you need remote access for "real" mission critical use, just bite the bullet and pay for a service like LogMeIn. You won't regret it and you will get real software support.

  • After loading lion, I get an error message "There was a problem connecting with the server.  URL's with the type "file" are not supported."

    After loading Lion, I have been getting an error message "There was a problem connecting to the server.  URLs with the type "file:" are not supported."  There does not seem to be any actual problem with internet connectivity, but it is persistent and annoying.  Any idea of its cause and treatment?

    Take a look at this link, https://discussions.apple.com/message/16156214#16156214

  • Problems synching with a second computer

    Hi,
    I've searched the docs and forums but can find no help for the problem I am having synching my iPod with a second computer.
    When I plug it in it recognises it but only calls it "E/:" and does nothing else. The iPod screen just continues to say "Do not disconnect".
    Any ideas?
    Thanks,
    Ric

    Thanks for your help folks, but after reviewing that document etc its not quite the same problem. The computer recognises the iPod as a mass storage device but doesn't show it in Windows Explorer. It does, however, show up in iTunes, but only as "E/:" (at home it comes up as "Ric's iPod") and cannot be updated.
    It is shown as "Update Manually" but I thought that is what I wanted as I'm trying to sync with a second computer?
    What I am trying to achieve is to be able to download the odd podcast or track while at work but more importantly to be able to upload my Nike+ data.
    Thanks again in advance!!
    Ric

  • Problem Synching with Google Calendar

    Having difficulty syching 8900 with Google calendar. Downloaded google synch to phone. When I check the Calendar Properties it show Wireless Synchroniztion as "No". It won't let me change this.. When I try to synch. I get the message that says"Login failed, due to network problems, please check your settings" Service is with Tmobile. Not sure which settings are not right.

    The calendar options should say no. It will only say "yes" is if you're on a BES. I think I had that error when I first started using Google Sync a while ago. I think I just uninstalled and reinstalled the program after getting that error a few times and then I was able to log in and setup the program
    If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
    Remember to resolve your thread by clicking Accepted Solution.

  • Config RADIUS on WLC 5508 - Problems comunication with NPS Server

    Hi,
    I'm facing some problems when configuring RADIUS auth with a NPS Windows Server.
    My WLAN interface is in a different vlan than the management interface, is that a problem?
    I want this wlan to be on a different vlan from the management. When i use wlan interface in the same vlan the RADIUS works without problems. But in different vlans is not working.
    The NPS server as 2 NICs, 1 for the wireless vlan, and another for the management vlan.
    the logs from the WLC shows this, but i have difficulties interpreting all this data:
    *apfMsConnTask_0: Dec 29 12:49:14.636: Association request from the P2P Client Process P2P Ie and Upadte CB
    *apfMsConnTask_5: Dec 29 12:49:36.607: 3c:c2:43:94:3e:bc Adding mobile on LWAPP AP d4:d7:48:45:fb:20(0)
    *apfMsConnTask_5: Dec 29 12:49:36.607: 3c:c2:43:94:3e:bc Association received from mobile on AP d4:d7:48:45:fb:20
    *apfMsConnTask_5: Dec 29 12:49:36.608: 3c:c2:43:94:3e:bc 0.0.0.0 START (0) Changing IPv4 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1709)
    *apfMsConnTask_5: Dec 29 12:49:36.608: 3c:c2:43:94:3e:bc 0.0.0.0 START (0) Changing IPv6 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1876)
    *apfMsConnTask_5: Dec 29 12:49:36.608: 3c:c2:43:94:3e:bc Applying site-specific Local Bridging override for station 3c:c2:43:94:3e:bc - vapId 9, site 'XXX', interface 'wlan'
    *apfMsConnTask_5: Dec 29 12:49:36.608: 3c:c2:43:94:3e:bc Applying Local Bridging Interface Policy for station 3c:c2:43:94:3e:bc - vlan 900, interface id 16, interface 'wlan'
    *apfMsConnTask_5: Dec 29 12:49:36.608: 3c:c2:43:94:3e:bc Applying site-specific override for station 3c:c2:43:94:3e:bc - vapId 9, site 'XXX', interface 'wlan'
    *apfMsConnTask_5: Dec 29 12:49:36.608: 3c:c2:43:94:3e:bc 0.0.0.0 START (0) Changing IPv4 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1709)
    *apfMsConnTask_5: Dec 29 12:49:36.608: 3c:c2:43:94:3e:bc 0.0.0.0 START (0) Changing IPv6 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1876)
    *apfMsConnTask_5: Dec 29 12:49:36.608: 3c:c2:43:94:3e:bc processSsidIE  statusCode is 0 and status is 0
    *apfMsConnTask_5: Dec 29 12:49:36.608: 3c:c2:43:94:3e:bc processSsidIE  ssid_done_flag is 0 finish_flag is 0
    *apfMsConnTask_5: Dec 29 12:49:36.608: 3c:c2:43:94:3e:bc STA - rates (8): 130 132 139 12 18 150 24 36 0 0 0 0 0 0 0 0
    *apfMsConnTask_5: Dec 29 12:49:36.608: 3c:c2:43:94:3e:bc suppRates  statusCode is 0 and gotSuppRatesElement is 1
    *apfMsConnTask_5: Dec 29 12:49:36.608: 3c:c2:43:94:3e:bc STA - rates (12): 130 132 139 12 18 150 24 36 48 72 96 108 0 0 0 0
    *apfMsConnTask_5: Dec 29 12:49:36.608: 3c:c2:43:94:3e:bc extSuppRates  statusCode is 0 and gotExtSuppRatesElement is 1
    *apfMsConnTask_5: Dec 29 12:49:36.608: 3c:c2:43:94:3e:bc Processing RSN IE type 48, length 20 for mobile 3c:c2:43:94:3e:bc
    *apfMsConnTask_5: Dec 29 12:49:36.608: 3c:c2:43:94:3e:bc Received RSN IE with 0 PMKIDs from mobile 3c:c2:43:94:3e:bc
    *apfMsConnTask_5: Dec 29 12:49:36.608: 3c:c2:43:94:3e:bc Setting active key cache index 8 ---> 8
    *apfMsConnTask_5: Dec 29 12:49:36.608: 3c:c2:43:94:3e:bc unsetting PmkIdValidatedByAp
    *apfMsConnTask_5: Dec 29 12:49:36.608: 3c:c2:43:94:3e:bc 0.0.0.0 START (0) Initializing policy
    *apfMsConnTask_5: Dec 29 12:49:36.608: 3c:c2:43:94:3e:bc 0.0.0.0 START (0) Change state to AUTHCHECK (2) last state AUTHCHECK (2)
    *apfMsConnTask_5: Dec 29 12:49:36.608: 3c:c2:43:94:3e:bc 0.0.0.0 AUTHCHECK (2) Change state to 8021X_REQD (3) last state 8021X_REQD (3)
    *apfMsConnTask_5: Dec 29 12:49:36.608: 3c:c2:43:94:3e:bc 0.0.0.0 8021X_REQD (3) DHCP required on AP d4:d7:48:45:fb:20 vapId 9 apVapId 8for this client
    *apfMsConnTask_5: Dec 29 12:49:36.608: 3c:c2:43:94:3e:bc Not Using WMM Compliance code qosCap 00
    *apfMsConnTask_5: Dec 29 12:49:36.608: 3c:c2:43:94:3e:bc 0.0.0.0 8021X_REQD (3) Plumbed mobile LWAPP rule on AP d4:d7:48:45:fb:20 vapId 9 apVapId 8 flex-acl-name:
    *apfMsConnTask_5: Dec 29 12:49:36.609: 3c:c2:43:94:3e:bc apfMsAssoStateInc
    *apfMsConnTask_5: Dec 29 12:49:36.609: 3c:c2:43:94:3e:bc apfPemAddUser2 (apf_policy.c:270) Changing state for mobile 3c:c2:43:94:3e:bc on AP d4:d7:48:45:fb:20 from Idle to Associated
    *apfMsConnTask_5: Dec 29 12:49:36.609: 3c:c2:43:94:3e:bc Stopping deletion of Mobile Station: (callerId: 48)
    *apfMsConnTask_5: Dec 29 12:49:36.609: 3c:c2:43:94:3e:bc Sending Assoc Response to station on BSSID d4:d7:48:45:fb:20 (status 0) ApVapId 8 Slot 0
    *apfMsConnTask_5: Dec 29 12:49:36.609: 3c:c2:43:94:3e:bc apfProcessAssocReq (apf_80211.c:6309) Changing state for mobile 3c:c2:43:94:3e:bc on AP d4:d7:48:45:fb:20 from Associated to Associated
    *dot1xMsgTask: Dec 29 12:49:36.611: 3c:c2:43:94:3e:bc Station 3c:c2:43:94:3e:bc setting dot1x reauth timeout = 0
    *dot1xMsgTask: Dec 29 12:49:36.611: 3c:c2:43:94:3e:bc Stopping reauth timeout for 3c:c2:43:94:3e:bc
    *dot1xMsgTask: Dec 29 12:49:36.611: 3c:c2:43:94:3e:bc dot1x - moving mobile 3c:c2:43:94:3e:bc into Connecting state
    *dot1xMsgTask: Dec 29 12:49:36.611: 3c:c2:43:94:3e:bc Sending EAP-Request/Identity to mobile 3c:c2:43:94:3e:bc (EAP Id 1)
    *Dot1x_NW_MsgTask_4: Dec 29 12:49:36.684: 3c:c2:43:94:3e:bc Received EAPOL START from mobile 3c:c2:43:94:3e:bc
    *Dot1x_NW_MsgTask_4: Dec 29 12:49:36.684: 3c:c2:43:94:3e:bc dot1x - moving mobile 3c:c2:43:94:3e:bc into Connecting state
    *Dot1x_NW_MsgTask_4: Dec 29 12:49:36.684: 3c:c2:43:94:3e:bc Sending EAP-Request/Identity to mobile 3c:c2:43:94:3e:bc (EAP Id 2)
    *Dot1x_NW_MsgTask_4: Dec 29 12:49:36.761: 3c:c2:43:94:3e:bc Received EAPOL EAPPKT from mobile 3c:c2:43:94:3e:bc
    *Dot1x_NW_MsgTask_4: Dec 29 12:49:36.761: 3c:c2:43:94:3e:bc Received Identity Response (count=2) from mobile 3c:c2:43:94:3e:bc
    *Dot1x_NW_MsgTask_4: Dec 29 12:49:36.761: 3c:c2:43:94:3e:bc EAP State update from Connecting to Authenticating for mobile 3c:c2:43:94:3e:bc
    *Dot1x_NW_MsgTask_4: Dec 29 12:49:36.761: 3c:c2:43:94:3e:bc dot1x - moving mobile 3c:c2:43:94:3e:bc into Authenticating state
    *Dot1x_NW_MsgTask_4: Dec 29 12:49:36.761: 3c:c2:43:94:3e:bc Entering Backend Auth Response state for mobile 3c:c2:43:94:3e:bc
    *Dot1x_NW_MsgTask_4: Dec 29 12:49:54.794: 3c:c2:43:94:3e:bc Received EAPOL START from mobile 3c:c2:43:94:3e:bc
    *Dot1x_NW_MsgTask_4: Dec 29 12:49:54.794: 3c:c2:43:94:3e:bc dot1x - moving mobile 3c:c2:43:94:3e:bc into Aborting state
    *Dot1x_NW_MsgTask_4: Dec 29 12:49:54.795: 3c:c2:43:94:3e:bc dot1x - moving mobile 3c:c2:43:94:3e:bc into Connecting state
    *Dot1x_NW_MsgTask_4: Dec 29 12:49:54.795: 3c:c2:43:94:3e:bc Sending EAP-Request/Identity to mobile 3c:c2:43:94:3e:bc (EAP Id 4)
    *Dot1x_NW_MsgTask_4: Dec 29 12:49:54.795: 3c:c2:43:94:3e:bc Reached Max EAP-Identity Request retries (3) for STA 3c:c2:43:94:3e:bc
    *Dot1x_NW_MsgTask_4: Dec 29 12:49:54.795: 3c:c2:43:94:3e:bc Sent Deauthenticate to mobile on BSSID d4:d7:48:45:fb:20 slot 0(caller 1x_auth_pae.c:3165)
    *Dot1x_NW_MsgTask_4: Dec 29 12:49:54.795: 3c:c2:43:94:3e:bc Scheduling deletion of Mobile Station:  (callerId: 6) in 10 seconds
    *Dot1x_NW_MsgTask_4: Dec 29 12:49:54.795: 3c:c2:43:94:3e:bc dot1x - moving mobile 3c:c2:43:94:3e:bc into Disconnected state
    *Dot1x_NW_MsgTask_4: Dec 29 12:49:54.795: 3c:c2:43:94:3e:bc Not sending EAP-Failure for STA 3c:c2:43:94:3e:bc
    *apfMsConnTask_5: Dec 29 12:49:55.518: 3c:c2:43:94:3e:bc Association received from mobile on AP d4:d7:48:45:fb:20
    *apfMsConnTask_5: Dec 29 12:49:55.519: 3c:c2:43:94:3e:bc 0.0.0.0 8021X_REQD (3) Changing IPv4 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1709)
    *apfMsConnTask_5: Dec 29 12:49:55.519: 3c:c2:43:94:3e:bc 0.0.0.0 8021X_REQD (3) Changing IPv6 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1876)
    *apfMsConnTask_5: Dec 29 12:49:55.519: 3c:c2:43:94:3e:bc Applying site-specific Local Bridging override for station 3c:c2:43:94:3e:bc - vapId 9, site 'XXX', interface 'wlan'
    *apfMsConnTask_5: Dec 29 12:49:55.519: 3c:c2:43:94:3e:bc Applying Local Bridging Interface Policy for station 3c:c2:43:94:3e:bc - vlan 900, interface id 16, interface 'wlan'
    *apfMsConnTask_5: Dec 29 12:49:55.519: 3c:c2:43:94:3e:bc Applying site-specific override for station 3c:c2:43:94:3e:bc - vapId 9, site 'XXX', interface 'wlan'
    *apfMsConnTask_5: Dec 29 12:49:55.519: 3c:c2:43:94:3e:bc 0.0.0.0 8021X_REQD (3) Changing IPv4 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1709)
    *apfMsConnTask_5: Dec 29 12:49:55.519: 3c:c2:43:94:3e:bc 0.0.0.0 8021X_REQD (3) Changing IPv6 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1876)
    *apfMsConnTask_5: Dec 29 12:49:55.519: 3c:c2:43:94:3e:bc processSsidIE  statusCode is 0 and status is 0
    *apfMsConnTask_5: Dec 29 12:49:55.519: 3c:c2:43:94:3e:bc processSsidIE  ssid_done_flag is 0 finish_flag is 0
    *apfMsConnTask_5: Dec 29 12:49:55.519: 3c:c2:43:94:3e:bc STA - rates (8): 130 132 139 12 18 150 24 36 48 72 96 108 0 0 0 0
    *apfMsConnTask_5: Dec 29 12:49:55.519: 3c:c2:43:94:3e:bc suppRates  statusCode is 0 and gotSuppRatesElement is 1
    *apfMsConnTask_5: Dec 29 12:49:55.519: 3c:c2:43:94:3e:bc STA - rates (12): 130 132 139 12 18 150 24 36 48 72 96 108 0 0 0 0
    *apfMsConnTask_5: Dec 29 12:49:55.519: 3c:c2:43:94:3e:bc extSuppRates  statusCode is 0 and gotExtSuppRatesElement is 1
    *apfMsConnTask_5: Dec 29 12:49:55.519: 3c:c2:43:94:3e:bc Processing RSN IE type 48, length 20 for mobile 3c:c2:43:94:3e:bc
    *apfMsConnTask_5: Dec 29 12:49:55.519: 3c:c2:43:94:3e:bc Received RSN IE with 0 PMKIDs from mobile 3c:c2:43:94:3e:bc
    *apfMsConnTask_5: Dec 29 12:49:55.519: 3c:c2:43:94:3e:bc Setting active key cache index 8 ---> 8
    *apfMsConnTask_5: Dec 29 12:49:55.519: 3c:c2:43:94:3e:bc unsetting PmkIdValidatedByAp
    *apfMsConnTask_5: Dec 29 12:49:55.519: 3c:c2:43:94:3e:bc 0.0.0.0 8021X_REQD (3) Initializing policy
    *apfMsConnTask_5: Dec 29 12:49:55.519: 3c:c2:43:94:3e:bc 0.0.0.0 8021X_REQD (3) Change state to AUTHCHECK (2) last state 8021X_REQD (3)
    *apfMsConnTask_5: Dec 29 12:49:55.519: 3c:c2:43:94:3e:bc 0.0.0.0 AUTHCHECK (2) Change state to 8021X_REQD (3) last state 8021X_REQD (3)
    *apfMsConnTask_5: Dec 29 12:49:55.519: 3c:c2:43:94:3e:bc 0.0.0.0 8021X_REQD (3) DHCP required on AP d4:d7:48:45:fb:20 vapId 9 apVapId 8for this client
    *apfMsConnTask_5: Dec 29 12:49:55.519: 3c:c2:43:94:3e:bc Not Using WMM Compliance code qosCap 00
    *apfMsConnTask_5: Dec 29 12:49:55.519: 3c:c2:43:94:3e:bc 0.0.0.0 8021X_REQD (3) Plumbed mobile LWAPP rule on AP d4:d7:48:45:fb:20 vapId 9 apVapId 8 flex-acl-name:
    *apfMsConnTask_5: Dec 29 12:49:55.520: 3c:c2:43:94:3e:bc apfPemAddUser2 (apf_policy.c:270) Changing state for mobile 3c:c2:43:94:3e:bc on AP d4:d7:48:45:fb:20 from Associated to Associated
    *apfMsConnTask_5: Dec 29 12:49:55.520: 3c:c2:43:94:3e:bc Stopping deletion of Mobile Station: (callerId: 48)
    *apfMsConnTask_5: Dec 29 12:49:55.520: 3c:c2:43:94:3e:bc Sending Assoc Response to station on BSSID d4:d7:48:45:fb:20 (status 0) ApVapId 8 Slot 0
    *apfMsConnTask_5: Dec 29 12:49:55.520: 3c:c2:43:94:3e:bc apfProcessAssocReq (apf_80211.c:6309) Changing state for mobile 3c:c2:43:94:3e:bc on AP d4:d7:48:45:fb:20 from Associated to Associated
    *dot1xMsgTask: Dec 29 12:49:55.521: 3c:c2:43:94:3e:bc Station 3c:c2:43:94:3e:bc setting dot1x reauth timeout = 0
    *dot1xMsgTask: Dec 29 12:49:55.521: 3c:c2:43:94:3e:bc Stopping reauth timeout for 3c:c2:43:94:3e:bc
    *dot1xMsgTask: Dec 29 12:49:55.521: 3c:c2:43:94:3e:bc dot1x - moving mobile 3c:c2:43:94:3e:bc into Connecting state
    *dot1xMsgTask: Dec 29 12:49:55.521: 3c:c2:43:94:3e:bc Sending EAP-Request/Identity to mobile 3c:c2:43:94:3e:bc (EAP Id 1)
    *Dot1x_NW_MsgTask_4: Dec 29 12:49:55.592: 3c:c2:43:94:3e:bc Received EAPOL START from mobile 3c:c2:43:94:3e:bc
    *Dot1x_NW_MsgTask_4: Dec 29 12:49:55.592: 3c:c2:43:94:3e:bc dot1x - moving mobile 3c:c2:43:94:3e:bc into Connecting state
    *Dot1x_NW_MsgTask_4: Dec 29 12:49:55.592: 3c:c2:43:94:3e:bc Sending EAP-Request/Identity to mobile 3c:c2:43:94:3e:bc (EAP Id 2)

    yes, I thought of that. But if i use a simple password authentication on the wireless, i can reach the server with the same subnet interface. But i don't want to allow this subnet to acess the management subnet of the wireless controller.
    One question i have is: The WLC uses whitch subnet on radius? Uses the subnet of the wireless interface or uses always the management interface?
    Could you help me understand how the radius auth works with this wireless controller? Did you see anything strange in the logs that I posted above? It seems to run ok until:
    dot1x - moving mobile 3c:c2:43:94:3e:bc into Authenticating state
    Entering Backend Auth Response state for mobile 3c:c2:43:94:3e:bc
    Received EAPOL START from mobile 3c:c2:43:94:3e:bc
    dot1x - moving mobile 3c:c2:43:94:3e:bc into Aborting state
    I also note this: "Applying Local Bridging Interface Policy for station "
    What does this means?

  • IMAP still not synching with Exchange Server... Come on Apple!

    I have IMAP set up to my company server from the iPad. Reason being so that I can manage emails (delete, move to folders etc) whilst working off-line.
    But any changes made via the iPad are not synching and updating on the Exchange Server once back on-line.
    Really hoped iOS4 would fix this, but no. This really is the most useless tool for a regular business traveller. Not being able to catch up on email and sort, delete, reply etc on short haul European flights is in-excusable for a 2010 business tool Apple!
    Unless I'm missing something??!!
    Message was edited by: Tuskaa7

    Yes thanks Graham.
    It is a big oversight in my mind and one which makes me carry a laptop most times, somewhat negating the need for the iPad. Thus actually adding a business tool I need to carry, rather than reduce in size and weight etc. I real shame for me and one which actually makes the iPad almost redundant most of the time.
    I know having searched these forums and speaking with colleagues etc, it is a common feeling and one which Apple should address asap in my mind.
    Thanks anyway,
    Keith

  • I have Problem uploading photos to craigslist. It says it has a problem communicating with the server and times out. It works in explorer but not Firefox and I just recently downloaded the new version of firefox. Can you be of any help?

    Photos will not upload and the server times out.

    Well, two thoughts.
    The battery has completely discharged and will take overnight to recharge, so don't expect much in an hour.
    The battery has deep discharged and is now dead. It will never recharge and should be replaced.
    If your iPod Touch, iPhone, or iPad is Broken
    Apple does not fix iDevices. Instead they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
    You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
    iPod Service Support and Costs
    iPhone Service Support and Costs
    iPad Service Support and Costs
    There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task. Start with Google to search for these.
    The flat fee for a battery exchange is, I believe, $99.00 USD.

  • Is anyone else having big problems synching with iTunes 11.1.3.8

    Hi is anyone else getting the same problems that I get with iTunes 11.1.3.8?
    iTunes is VERY slow to load. Then when I try to dowload updates it downloads the first update, then hangs saying "Processing File" It will stay like this until I restart the computer. Sometimes I get the Error Message: Err 3253.
    If I try to close iTunes and then reopen it, it WILL NOT OPEN!
    I have tried repairing itunes through the Control Panel.
    And I have tried deleting and the reinstalling it.
    Any help, advice etc gratefully accepted.
    Merry Christmas to all.

    Met,
    Here's a few temporary work-arounds that may work for you, hopefully you don't have a HUGE amount of apps on your iTunes that need updating.
    1.) Update all of the apps via your iPhone/iPad and then sync your device with your iTunes, that will update all the apps that you're unable to update via download on iTunes.
    2.) If the apps aren't on your iPhone/iPad and you've got the room, redownload them to your iPhone/iPad and sync your device. That will update the apps you're unable to update via iTunes, you can delete them off your phone/pad when you're done updating them on your computer.
    3.) Instead of "updating" the apps via the update section of iTunes, make note of what the app is, check that it's still available for download on the store (sometimes stuff gets pulled and you don't want to do this before you check) - once you've confirmed that the app is still available for download, instead of downloading it in the update section DELETE it (remove it entirely from your iTunes and send it to recycle) then RE-DOWNLOAD it fresh from the store, I've found that it's only the update section that hangs on processing, not the store section.
    Hope those help, that's what I did because I'm compulsive about keeping my apps and software up to date.

  • Problem synching with MobileMe

    I made a MobileMe gallery in iPhoto '09 on my iMac and synchronized with MobileMe. This worked fine and the gallery is available on line. Then I synchronized my Macbook Air and the gallery appears, but only about a third of the pictures are downloaded, the others just have a dotted white outline. I've tried re-synchronizing but with no improvement. Anyone know of a solution or seen this before? My other gallery's are all okay using the same method and I'm using OS-X 10.5.7 with all the latest updates applied.

    I used to have that problem with mine and here is how I solved it. First, delete your contacts and calendars that are Mobile Me related on the iPhone. Next, create a unique contact on your phone that you don't have on your mobile me contacts, such as John Doe with a 111-111-1111 phone number. Next create a new contact that you didn't have on your mobile me calendar, such as "event: make mobile me work correctly from 12:00pm to 1:00pm." Now sync your phone with mobile me and when you hit sync it should give you the option to "merge contacts and calendars" or replace contacts and calendars. By clicking merge, this solved my problem of duplication. You can go back and delete the fake event and contact after merging. Hope this helps.

Maybe you are looking for

  • Upgraded iTunes: now cannot see the Podcasts on my iPod nano

    I know it sounds odd but I am genuinely sad that I have not been able to use my iPod for two days: I bought an iPod nano when they first came out and have been very happy with it. Two days ago I upgraded iTunes for the first time (to 7.6.2.9). Since

  • Premiere Pro CS5.5 Won't Open - Mac

    At first I had problems with AE not opening (hanging at "Initializing Media Core") and the dynamic link to some of the composiitons in my PP project, so I called support. I spent an hour and a half with a lady controlling my computer, and my AE probl

  • I have a unknown person's macbook connected to my network. How do I remove it?

    I have an unknown person's macbook connected to my computer as a "shared" directory.  How can I remove it?  i'm signed in as my computer's administrator, but it says I don't have sufficient permissions to remove it...

  • Biztalk XSLT

    I am new to use XSLT. i have a requirement where i have to create a node in output schema. my input schema is as below   <?xml version="1.0" encoding="utf-16" ?> - <xs:schema xmlns:b="http://schemas.microsoft.com/BizTalk/2003" xmlns="http://XSLTt.Sch

  • VISTA64 RC1 and more than 2G RAM - finally wo

    If creative would lonly listen to people who had problems with XP64, then maybe this would not be an issue in vista.... I have had the same issue with XP64 and an audigy2, and xfi. if you have 4G of ram, then there is no 5. sound. You only get sound