Problems synchronizing video and audio while using FME 2.5

Hello...
I use FME2.5 to deliver media to justin´s server for
broadcasting on the internet...
As capture video I use webcammax to capture video from files
avi and divx...
But somehow since I started using FME2.5 sonme videos are
perfectly sinchronized while streaming but others no...the audio is
not sunchronized at all...
I stream the media on justin in H.264 at a bit rate of
300kbps 25fps and 320x240 for video...
and audio mp3...
Is taht a way to synchronize it?
And do adobe have a complete solution of capturing video
files and streaming it to justin server?...
Thanks...

I too encounter similar kind of problem, but i am using Sony
HD handy cam which captures HD video and FME 3.5 for encoding, i
tried out both medium and high bandwidth options in it (FME 3.5),
vp6 and H.264 and i found vp6 was more ok in light of lip sync (AV
synchronizing) but there was problem with H.264 in both high and
medium settings..so is there any option to get synch with H.264 on
FME 3.5..???

Similar Messages

  • Having problems with Video and Audio

    Hi - I am new to Captivate.  I have created a demostration with about 85 slides with audio on each slide.  When I preview the project all is fine.  When I publish the swf and htm and play on my machine all is fine.  However when my colleagues try and listen to the demo, the video and audio get out of sync.  The audio seems to go faster than the video.  I am not sure if it is due to the sound speeding up or the video slowing down.  Has anybody seen this bfore ?  Can anybody help ?  I am using Captivate 4 with the latest patch

    Hi there
    I've seen others suggest that adjusting the audio clips for each slide so they begin playing at perhaps .1 or .2 seconds after the slide begins solves the issue.
    Perhaps you will have good luck with this approach as well.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • How to get video and audio while chatting with your PC friends.

    Just download a program called ivisit.
    http://www.ivisit.com/
    Everything else I tried sucked. Nothing worked. Yahoo, MSN, AOL IM... they all crapped out. But ivisit rocked right out of the gate, and you can get it free.
    WIth the lite version you get only one connection and it lasts for an hour. After the hour you lose video but audio and chat still works. You have to be disconnected fro the other user for a half hour for the video feed to work again.
    But if your itching to connect to your family with your new iSight and all the other big name programs are disapointing you, then one hour is plenty of time.
    ivisit saved my christmas.

    I agree. iVisit was a lifesaver. I was regreting getting my iSight until I had a successful connection. It was truly a Macintosh program - easy to setup, intuitive, not too much tech stuff to resort to figure out how things work. I was unhappy with resolution, though. You have to pay to get good resolution.

  • I was having problems with video and audio on certain sites like youtube. I edited some settings in Realplayer and have video now, but no audio.

    Went into preferences on Realplayer, Download and recording, then unchecked "Enable Web Downloading and Recording...". That got video going, but no audio still. (Interesting that the list of browsers below that check box did NOT include Firefox.

    See:
    *https://support.mozilla.org/kb/flash-113-doesnt-load-video-firefox
    You can also try to clear the Flash local storage and settings.
    *Windows Control Panel > Flash Player, click Delete All and Delete Data
    Flash Website Storage Settings panel:
    * http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html
    Global Storage Settings Panel:
    * http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager03.html
    Did you also check the setting in the volume mixer when Firefox is using the flash plugin?
    *https://support.mozilla.org/kb/No+sound+in+Firefox

  • How to send video and audio (videoconference) using JMF without using RTP

    Hi everyone,
    I am creating an application using JMF, a videoconference, but I would like to transmit the packets by myself without using RTP. I would have a socket (or virtual Serial Port -- > Bluetooth) and I would send the info that way. Is it possible??
    Thanks in advance!!
    Cheers

    Yeah, you'd need to implement something like this for that.
    [http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/RTPConnector.html]

  • Video and audio choking

    Ever since I upgraded to Moutian Lion I'm having an issue where my video and audio streams are choking while doing anything. For example, I'll be streaming spotify and working on a photoshop file (below 20mb file size), and the audio will start cutting out or sounding like an old cassette tape getting eaten by the tape deck. Can anyone lend a hand?
    Thanks!

    One other thing to note. It's not my internet connection. It happnes when I'm playing iTunes files that are saved locally. Again, when my second cinema display is plugged into thunderbolt, I get the latency in the playback (both video and audio) while doing even basic tasks like internet browsing. If I unplug the display the problem goes away. I'm fully up to date on all OS updates and Firmware updates.

  • Video and Audio Track Selection

    Is there any quick way to do this? Nothing in the keyboard shortcuts menu that seems close to "Sleect Video Track 1", "Select Audio Track 1", etc. Is it only achieveable with a mouse? Thanks all.

    I have made custom keyboard shortcuts for video and audio tracks using Toggle Track.
    I use numbers 1 to 7 for Video and Shift 1-7 for Audio.
    In conjunction with Mouse clicking and shift mouse clicking on tracks..does all that I need.

  • Video and audio not synchrone with apple tv after update mountian lion on macbook pro

    i have a problem with my apple tv. after i bought and instaled mountain lion on my mac book pro i have trouble with apple tv and my laptop. when my laptop conects with apple tv most of the time my wifi doesnt work on my macbook but on my apple tv it stil does work. when it does work and i play a movie of my own by using itunes the first second the video and audio is synchrone but after that audio is at normal speed but the video gets behind. and i am getting sick of it. does sumbody reconize the problem and can help me with this problem?????

    Same issue here- I can airplay my amazon prime library just fine from my iphone 5 but on my macbook- (mavericks, 15 inch 2013 retina with quad core i7, nvidia 650 M and SSD) it just sputters and lags.
    I have noticed web video is considerably worse than local content, giving me pauses of up to 2 or 3 seconds in which video stops but audio continues in the amazon player. Youku video, however, seems relatively stable. Our subscription speed is 25 mbps, so that should be plenty to stream SD video from Amazon and doesn't account for why it would be nice and stable from the iphone, but not the mbp.
    Playing light, locally hosted steam sidescrollers  like Limbo is better but gives periodic drops in framerate on the Tv. when mirroring the framerate remains steady on the MBP screen.
    Games airplayed from my iphone seem relatively stable, though with a noticably lower framerate on the TV than on the phone.
    It seems these issues have abated considerably since yesterday's Apple TV update, but are still curious nonetheless and I'm not sure that the update yesterday was specifically meant to address those issues or if I'm just getting a time with less network interference now.
    Comcast recently installed a new router/modem/phone combo, replacing our old separate modem and router setup. I'm going to test if putting the network on a different channel helps.

  • Hello All... Back after a brief absence, things look a little bit different. I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I'v

    Hello All...
    Back after a brief absence, things look a little bit different.
    I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I've tried using Sorenson 3 (15 frames, key frames set to automatic, 320 x 240) for video and IMA 4:1 (mono) for audio. The resulting video looked great but the file size came in at about 255 Mb.
    Thanks!
    PowerMac G5 1.8 Dual   Mac OS X (10.4.3)  
    Message was edited by: Dan Foley

    Thank you for the replies.  Everyone was correct about the jack, interface, and phasing problems.  I have been unplugging my motu audio interface and then using headphones at work.  I have not changed any detailed audio output settings in logic.  When I read that the jack might be a problem I tried switching headphones.  This actually helped.  I am using dre-beats headphones and they seem to be having issues with the mac/jack-(the phasing/panning problems.  I can use these headphones with other devices but not the mac.  I have to use ipod ear buds and the phasing seems fixed.  Hopefully this information is helpful to someone else. 
    If anyone knows how to correct this issue please let me know its difficult to know what my final mixes are going to sound like and I have had to keep bouncing everything into i-tunes- sync to ipod and then listen in my car radio. 

  • After years of owning all things Mac, I am finally trying to use iChat, and can't get it to work. I see my buddy, but all I can do is send a message--the video and audio chat icons are gray, as is inviting to a video chat under Buddies.

    After years of owning all things Mac, I am finally trying to use iChat, and can't get it to work. I am using gmail, and I see my buddy (no camera icon next to her name), but all I can do is send a message--the video and audio chat icons are gray, as is inviting to a video chat under Buddies. My buddy has the same problem as I.  We are able to do video chat through gmail, but I had hoped to use iChat.  I am using OS 10.6.8, iChat v. 5.0.3.  What am I missing?

    HI,
    iChat will Video chat to another iChat in a Jabber Buddy List (Google run a Jabber server for GoogleTalk)
    However it will not Video to the Web Page login to iGoogle or the Web Mail Page login.  (where people can Google Chat as it were in a  Web Browser).
    Nor does it video to the Google Talk Stand alone app for PCs or any other Jabber apps on any platform.
    iChat uses a connection Process called SIP (Session Initiation Protocol) which is also used by other VoIP devices.
    Jabber/XMPP invited the Jingle Protocol for Jabber Applications.
    Google have included this in their Standalone app and the Plug-in for Web Browsers on both PCs and Mac (you can get this as a Standalone Plug-in or as part of Chrome)
    More on this here  This article has been changed several time in the recent months.  It now claims a greater involvement by Google in writing the Jingle Library (Although now Google's version does not work with the others)
    This tends to mean that using the web Login to Google to Chat also cannot video chat to other Jabber apps that are using Jingle.
    If your Buddy is using iChat then check the Video Menu has two items to Enable Camera/Video chat and Microphone/Audio chats are ticked.
    In the View Menu the Show Status Items should be ticked (Selecting them toggles the tick and the function On or Off)
    It could be Internet speed but at this stage I would doubt this at this stage.
    10:27 PM      Saturday; January 21, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Video and audio linking problem, and others?

    So, I am having 2 main problems. When I first started using FCE everything was great. Then, I changed some settings, and for some reason, it doesn't work like I want it to. So, my first problem is linking. When I import, it is automatically unlinked, but I think FCE thinks that it is! When I do press Apple L (shortcut to link video and audio) it still isn't linked! How can I get it to link?
    My 2nd problem may be linked to the first. When I want to make a cut right on the playhead, it is really hard to get it on the playhead. Previously, it would just snap on the playhead if I got close, and now it doesn't! How can I get it to snap better?
    Thanks for all the help!

    1) Make sure linking (Shift-L) is turned on before you add your clip to the timeline. To manually link audio tracks to your video tracks select the two and go to +Modify > Link+ (Command-L).
    2) Make sure snapping is turned on in the timeline. Hit the "N" key to toggle it on or off.

  • Can we capture the video and audio using cam and microphone in Edge Animate?

    Hi Everyone,
    I got a new requirement from the client to create a HTML5 based functionality through which one can capture the video and audio using his web-cam/camcorder and microphone. I have researched on internet and found that there is api available (not reliable) http://www.html5rocks.com/en/tutorials/getusermedia/intro/ . I am not a coder by profession and use Edge animate to create HTML 5 based animations and stuff like that. Another problem which i have found that the api only works well with Chrome and Opera and not with Mozilla, IE..
    Can anybody help me out in this, please...
    Thanks & Warm Regards
    Vikas

    Hi, Vikas-
    After a brief bit of research, you're definitely hitting upon the limitation of the browsers.  Not all of the browsers have implemented this part of the HTML5 standard, so you're going to either have to use Flash or be limited to these specific browsers.
    Thanks,
    -Elaine

  • I have a clip with synchronized audio. When I trim a section of video it does not trim the audio. How do I trim both video and audio so that the clip remains in sync?

    Why is FCPX not allow me to cut both video and audio tracks at the same time?
    My separate synchronized audio does not trim when I trim the video. They are connected and synchronized.

    fulei wrote:
    The audio track does not edit along with the video. They go out of sync
    Sounds like a different problem than your trim problem in the first post. If your problem is they drift out of sync, we'd need to knoow more about the project and clip properties – including how the audio file you're syncing to was created.
    Russ

  • Video and audio out of synch on burned DVD.  DVD project appears to be fine.  I'm using 1X speed to burn disc.  Project info indicates plenty of space.  What should I do?

    Video and audio are out of synch on some chapters of a burned double layer DVD.  The iDVD (7.1.2) project seems to be fine.  I'm burning the DVD using a 1X speed.  What else can I do to solve this problem.  Based on the project information, I have plenty of space relative to the DVD capacity. 

    Follow this workflow to help assure the best qualty video DVD:
    Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image  menu option. This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image, launch DVD Player and play it.  If it plays OK with DVD Player the encoding is good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    OT

  • FME Firewire Video and Audio Support(not from Camera)

    I can't seem to find any definitive answer on weather FME can
    support both video and audio from a single Firewire connection that
    is coming from an analog to digital Firewire converter box. I want
    to take the analog audio and video feed, convert it to a Firewire
    feed (using a Canopus DV converter) and feed that into a laptop.
    Seems like that should work and both audio/video would be
    present...
    That being said, I have found a few conflicting reports on
    weather or not both the audio and video will be recognized. I also
    note that others have been having issues in FME with PCI cards (no
    audio when it should be there) so I'm curious if anyone has tried
    Firewire (not from a camera). Will it work in FME v2.5+? If not, is
    there an elegant laptop analog to digital conversion solution (that
    doesn't require using the crapy mic in or line in ports)? (RCA
    connectors would be preferred.)
    Thanks so much!
    P.S. I'm disappointed with Adobe's lack of support on this
    encoder. They claim Firewire is supported but I've only found a few
    3rd party sources that say 'video only' and nothing concrete at
    that (even in the downloadable manual). I'm also disappointed at
    Adobe's lack of e-mail support for 'pre-sale' product questions.
    Not supper great customer service!

    FME should support audio and video from Firewire
    source.

Maybe you are looking for