Problems to configure system connection with soa manager

Hi everybody,
I realy have a big problem. I have to use some Enterprise Services out of another SAP system.
for that I need to setup a system connection in the SOA Manager. But I don't know how i can get the information about the system, I want to adress, and to be honest, I also do not realy know how to setup such a connection. I talk to many people in my department and nobody realy had an answer which could help me to solve the problem.
Please help me.
Thanks in advance.
Chris

What is your internet connection??
If you have adsl or cable modem / router you need to work out if the modem can be bridged.. in some cases it can and some not.. without any info we don't know..
Lets say you have adsl with pppoe authentication .. then adsl modem can be bridged and the TC can take over pppoe duties.
Cable modem will usually be straight modem or can have NAT turned off. TC then is just set to do dhcp and share public ip address.
You need to then turn off everything and restart the modem.. wait 2min and then start the TC.. go to airport utility and make sure you have the public ip on the TC WAN port.. ie you must plug the modem in to wan only.
If you cannot bridge the modem then it is difficult to use the TC as the main router.. it is better to bridge it.

Similar Messages

Disk Utitlity has "Lost Connection" with Disk Management tool"

[ Edited by Apple Discussions Moderator; please start a new topic about your technical issue. ]
Running OSX10.3.8
I installed:
"iTunes" (6.0.2)
"iPod Updater 2005-11-17" ((null))
"iChat Update" (2.1)
Went to repair disk permissions
I get this error:
Disk Utitlity has "Lost Connection" with Disk Management tool" Please quit Disk Utility.
then it says quitting Disk Utility may render the disk useless. Stopping the scan just gives a "stopped by User" red text message in the DU screen.
Had to Quit. No other way out.
Now it will not repair "or" verify Disk permissions at all.
What to do?
Powermac G4 1.25ghz, OS9/OSX Mac OS X (10.3.8)

Getting the same results booting off of the install CD. I even ran fsck -y after a soft boot(command S). Note I also installed the iPod updater and iChat update.
I'm getting a crash log that has to do with DiskManagement
Path: /System/Library/PrivateFrameworks/DiskManagement.framework/Resources/DiskManage mentTool
I tossed the pref file for Disk utility and tried to locate a pref for the Disk Management but nada...
Is there a prefs file that needs to be tossed?
Anyone do a recent Onyx Maintainence cleaning?
Is there a way to do an iTunes Uninstal and reinstall a previous version?
Powermac G4 1.25ghz, OS9/OSX Mac OS X (10.3.8)
Powermac G4 1.25ghz, OS9/OSX Mac OS X (10.3.8)

How to verify the Source systems connectivity with BWQ System.

Hi All,
I have diff source systems. And my requirement is to check the source systems connectivity with BWQ (BW Quality sys). please any body tell me the steps how to check the source system connectivity ?
Thanks & Regards,
Manju

Hi Manjula,
If you encounter problems when establishing a connection to your target server, check the following:
A message box appears while performing one of the following actions:
      Setting connection by choosing Apply to local session.
      Testing connection settings by choosing Test settings.
      Creating SAP TSQL objects
If errors occurred, they are displayed in the respective message box.
   Check developer trace files in ST11.
Test connection:
     For RFC related errors, check the RFC connection via SM59
     For database multi-connect errors, check if you can connect to the target SQL Server with the SQL Server Query Analyzer. Also check if the DBCON entries are correct.
Regards,
RK

IP/TV "Could not create RTSP connection with Program manager"

Hello,
When we try to view IP/TV content with the IP/TV viewer we are able to but when we try to view it through a webpage I recieve the error:
"Could not create RTSP connection with Program manager"
I have no idea what the problem is. Anyone have any input?
Please see the attached image.

The client, program manager and ip tvserver are all on the same local area network
This URL should help you:
http://www.cisco.com/en/US/customer/products/hw/contnetw/ps1863/index.html

Problem in configuring IPv6 interface with default Router lifetime.

I'm facing Problem in configuring IPv6 interface with default
Router lifetime through a router advertisement.
I'm also see an unusual behavior that even after configuring accept_rtadv=0,
the ipv6 address is configured.
Please help in out .

Mac OS 9 does not support IPv6. While you can have IPv6 on your network, a Macintosh running Mac OS 9.2.2 or earlier cannot make connections to services using this network protocol.
To use IPv6 on a Macintosh, you need Mac OS X 10.1 or later (as far as I know).
—tonza

Please help me configure authentic connection with Caller ID via ISDN 30B+D using Cisco ACS

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin-top:0in;
mso-para-margin-right:0in;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0in;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;}
Hi all
I have set up a dial up connection between to PC's at remote site and center. It using ISDN 30B+D which is configured on Router 3845. Currently I have configured authentic connection with username and password using Cisco ACS. To enhance the security configuration I want to authenticate both the phone number which dialup with Cisco ACS. And currently I have not done this. Please help me solve this problem.
Thanks so much
Longn

1) I deleted bridge-utils, netcfg
2) I edited /etc/hostapd/hostapd.conf:
interface=wlan0
#bridge=br0
edited /etc/dnsmasq.conf:
interface=wlan0
dhcp-range=192.168.0.2,192.168.0.255,255.255.255.0,24h
and edited /etc/rc.local:
ifconfig wlan0 192.168.0.1 netmask 255.255.255.0
ifconfig wlan0 up
3) I added in autostart these daemons: hostapd, dnsmasq and iptables.
Profit!

'Disk Utility has lost connection with Disk Management Tool' w/ RAID 10 set

Using 4 internal drives, I have specified the following setup for each:
2 partitions, 1 'speed' of 5 GB and 1 'data' of whatever remains.
The 4 speed partitions stripe to a single RAID volume correctly.
The 4 data partitions are used to make a RAID 10 volume as follows:
The first 2 data partitions are mirrored to make a 'data-A'
The next 2 data partitions are mirrored to make a 'data-B'
These complete correctly.
Upon attempting to strip data-A and data-B in order to finish the RAID 10 setup, Disk Utility quits with the following message:
"Disk Utility has lost connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility'.
A search here and on the nets reveals only that this message appeared in 10.3.x when attempting to repair disk permissions and had to do with a rogue iTunes support file. This is occurring on a blank system (no iTunes installed) so I don't think its the same cause.
Note that I was able to complete this setup under Tiger several times without issue, so it seems to be unique to Leopard. Does anyone know what is going on and hopefully suggest a workaround?

To answer my own issue and leave a marker here for others, I was able to successfully set up a RAID 10 partition using diskutil, indicating that the problem is Disk Utility itself and not the RAID implementation.
Disk Utility has proven itself to be bugridden (must restart frequently to get updated view of volumes; drops device names at various times; etc.) and this latest bug would seem to suggest that it should be avoided in favor of diskutil for any serious RAID construction.

System Monitoring with Solution Manager Ehp1

Hi,
I'm Tomas Piqueres, and I'm working in a VAR SAP with Solution Manager.
Recently, we installed Solution Manager Ehp1 and we are trying to configure it for System Monitoring. When I worked with Solution Manager SP17 I used to go to transaction RZ21 to add the system I wanted to monitoring and then put the SID and RFCs of the system.
Now with Solution Manager Ehp1, when I create the system in transaction RZ21, first I have to set the Component Type to Be Monitored and then the SID, Message Server Logon Group, the client and user are set automatically, and the password I've set to user CSMREG.
when I fill all the entries, I can see the RFCs used for the monitoring of the system. Those RFCs are set automatically:
<SID>_RZ20_COLLECT
<SID>_RZ20_ANALYZE
I can't edit those RFCs, so I have to create it manually. I check that RFCs destination works fine and both pass the authorization test, so when I try to save the system at transaction RZ21, I see the following errors:
<SID>_RZ20_COLLECT_123539Error when opening an RFC connection
Error during remote call of SAL_MS_GET_LOCAL_MS_INFO function: Error when opening an RFC connection
Error during remote call of SALC function: Error when opening an RFC connection
Error during remote call of RFC1 function: Error when opening an RFC connection
I've been looking for information about those errors and how to monitoring with Solution Manager Ehp1, but I haven't found anything usefull.
Please, Could you help me?
Thanks and regards,
Tomas.

Tomas,
I need to configure EWA from my Solman system and I completed the steps (defining and creation of RFC destinations to the target systems from my Solman system). I downloaded the lates ccmsagent file from the market place based my target system configurations.
Herewith attaching the logs while I'm trying to check the profile parameter.
tqaadm@saptqa01:/usr/sap/TQA/SYS/exe/run 5> sappfpar check pf=/usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
================================================================================
==   Checking profile:     /usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
================================================================================
***WARNING: Unexpected parameter: DIR_EPS =/usr/sap/trans/EPS/----
***WARNING: Unexpected parameter: SAPSECULIB =/usr/sap/TQA/SYS/exe/run/libsapsecu.o
***WARNING: Unexpected parameter: abap/buffersize_part1 =1200000
***WARNING: Unexpected parameter: auth/auth_number_in_userbuffer =5000
***WARNING: Unexpected parameter: dbs/io_buf_size =100000
***WARNING: Unexpected parameter: rsau/local/file =/usr/sap/TQA/DVEBMGS30/log/audit/audit_++++++++
***WARNING: Unexpected parameter: rsau/selector1/class =35
***WARNING: Unexpected parameter: rsau/selector1/severity =2
***WARNING: Unexpected parameter: rsdb/rclu/cachelimt =0
***ERROR: Size of shared memory pool 40 too small
================================================================
SOLUTIONS: (1) Locate shared memory segments outside of pool 40
               with parameters like: ipc/shm_psize_<key> =0
SOLUTION: Increase size of shared memory pool 40
          with parameter: ipc/shm_psize_40 =1472000000
Shared memory disposition overview
================================================================
Shared memory pools
Key:   10 Pool
            Size configured.....:   642000000 ( 612.3 MB)
            Size min. estimated.:   637597428 ( 608.1 MB)
            Advised Size........:   640000000 ( 610.4 MB)
Key:   40 Pool for database buffers
            Size configured.....: 1048000000 ( 999.4 MB)
            Size min. estimated.: 1468229308 (1400.2 MB)
            Advised Size........: 1472000000 (1403.8 MB)
Shared memories inside of pool 10
Key:        1 Size:        2500 (   0.0 MB) System administration
Key:        4 Size:      523648 (   0.5 MB) statistic area
Key:        7 Size:       14838 (   0.0 MB) Update task administration
Key:        8 Size:    67108964 ( 64.0 MB) Paging buffer
Key:        9 Size:   134217828 ( 128.0 MB) Roll buffer
Key:       11 Size:      500000 (   0.5 MB) Factory calender buffer
Key:       12 Size:     6000000 (   5.7 MB) TemSe Char-Code convert Buf.
Key:       13 Size:   200500000 ( 191.2 MB) Alert Area
Key:       16 Size:       22400 (   0.0 MB) Semaphore activity monitoring
Key:       17 Size:     2672386 (   2.5 MB) Roll administration
Key:       30 Size:       37888 (   0.0 MB) Taskhandler runtime admin.
Key:       31 Size:     4806000 (   4.6 MB) Dispatcher request queue
Key:       33 Size:    39936000 ( 38.1 MB) Table buffer, part.buffering
Key:       34 Size:    20480000 ( 19.5 MB) Enqueue table
Key:       51 Size:     3200000 (   3.1 MB) Extended memory admin.
Key:       52 Size:       40000 (   0.0 MB) Message Server buffer
Key:       54 Size:    20488192 ( 19.5 MB) Export/Import buffer
Key:       55 Size:        8192 (   0.0 MB) Spool local printer+joblist
Key:       57 Size:     1048576 (   1.0 MB) Profilparameter in shared mem
Key:       58 Size:        4096 (   0.0 MB) Enqueue ID for reset
Key:       62 Size:    85983232 ( 82.0 MB) Memory pipes
Shared memories inside of pool 40
Key:        2 Size:    31168040 ( 29.7 MB) Disp. administration tables
Key:        3 Size:   114048000 ( 108.8 MB) Disp. communication areas
Key:        6 Size: 1064960000 (1015.6 MB) ABAP program buffer
Key:       14 Size:    28600000 ( 27.3 MB) Presentation buffer
Key:       19 Size:    90000000 ( 85.8 MB) Table-buffer
Key:       42 Size:    13920992 ( 13.3 MB) DB TTAB buffer
Key:       43 Size:    43422392 ( 41.4 MB) DB FTAB buffer
Key:       44 Size:     8606392 (   8.2 MB) DB IREC buffer
Key:       45 Size:     6558392 (   6.3 MB) DB short nametab buffer
Key:       46 Size:       20480 (   0.0 MB) DB sync table
Key:       47 Size:    13313024 ( 12.7 MB) DB CUA buffer
Key:       48 Size:      300000 (   0.3 MB) Number range buffer
Key:       49 Size:     3309932 (   3.2 MB) Spool admin (SpoolWP+DiaWP)
Shared memories outside of pools
Key:       18 Size:     1792100 (   1.7 MB) Paging adminitration
Key:       41 Size:    25010000 ( 23.9 MB) DB statistics buffer
Key:       63 Size:      409600 (   0.4 MB) ICMAN shared memory
Key:       64 Size:     4202496 (   4.0 MB) Online Text Repository Buf.
Key:       65 Size:     4202496 (   4.0 MB) Export/Import Shared Memory
Key:     1002 Size:      400000 (   0.4 MB) Performance monitoring V01.0
Key: 58900130 Size:        4096 (   0.0 MB) SCSA area
Nr of operating system shared memory segments: 9
Shared memory resource requirements estimated
================================================================
Nr of shared memory descriptors required for
Extended Memory Management (unnamed mapped file).: 64
Total Nr of shared segments required.....:         73
System-imposed number of shared memories.:       1000
Shared memory segment size required min..: 1472000000 (1403.8 MB)
System-imposed maximum segment size......: 35184372088832 (33554432.0 MB)
Swap space requirements estimated
================================================
Shared memory....................: 2050.4 MB
..in pool 10 608.1 MB,   99% used
..in pool 40 999.4 MB, 140% used !!
..not in pool:   34.4 MB
Processes........................: 716.8 MB
Extended Memory .................: 8192.0 MB
Total, minimum requirement.......: 10959.2 MB
Process local heaps, worst case..: 1907.3 MB
Total, worst case requirement....: 12866.5 MB
Errors detected..................:    1
Warnings detected................:    9
After checking the profile parameter I tried to run sapccm4x in /run directory but got the below error and I'm not able tomove further.
Pls have a look at these two and let me know what could I do to proceed further.
tqaadm@saptqa01:/usr/sap/TQA/SYS/exe/run 5> sapccm4x -R pf=/usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
INFO: CCMS agent sapccm4x working directory is /usr/sap/TQA/DVEBMGS30/log/sapccm4x
INFO: CCMS agent sapccm4x config file is /usr/sap/TQA/DVEBMGS30/log/sapccm4x/csmconf
INFO: Central Monitoring System is [SMP]. (found in config file)
      additional CENTRAL system y/[n] ?   :
INFO: found ini file /usr/sap/TQA/DVEBMGS30/log/sapccm4x/sapccmsr.ini.
INFO:
      CCMS version 20040229, 64 bit, multithreaded, Non-Unicode
      compiled at   Jun 28 2010
      systemid      324 (IBM RS/6000 with AIX)
      relno         6400
      patch text    patch collection 2010/1, OSS note 1304480
      patchno       335
INFO Runtime:
      running on    saptqa01 AIX 3 5 00069A8FD600
      running with profile   /usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
INFO profile parameters:
      alert/MONI_SEGM_SIZE = 200000000
      alert/TRACE          = 1
      SAPSYSTEM            = 30
      SAPSYSTEMNAME        = TQA
      SAPLOCALHOST         = saptqa01
      DIR_CCMS             = /usr/sap/ccms
      DIR_LOGGING          = /usr/sap/TQA/DVEBMGS30/log
      DIR_PERF             = /usr/sap/tmp
INFO:
      pid           4165682
INFO: Attached to Shared Memory Key 13 (size 200141728) in pool 10
INFO: Connected to Monitoring Segment [CCMS Monitoring Segment for application server saptqa01_TQA_30, created with version CCMS version 20040229, 64 bit single threaded, compiled at Oct 3 2008, kernel 6400_20020600_254, platform 324 (IBM RS/6000 with AIX)]
        segment status     ENABLED
        segment started at Tue Sep 14 09:35:56 2010
        segment version    20040229
ERROR: Shared Memory misconfiguration ==> can not monitor SAP application server saptqa01_TQA_30
       Dispatcher Admin Shared Memory (Key 01) and CCMS Shared Memory (Key 13) both in pool 10.
       Please change configuration with profile parameters
           ipc/shm_psize_01 = -<different pool nr>
       xor
           ipc/shm_psize_13 = -<different pool nr>
EXITING with code 1

SLD configuration - JCO connection with SAP Router

Hi,
I installed the new Sneak Preview SP11 Java Edition including SAP Portal. I tried to run an own Web Dynpro Application with RFC-Access on a R/3 System.
Unfortunately I was not able to get the JCO Connection to run. The R/3 System is reached via SAP Router. I am a little bit confused, because with the last Sneak Preview (SP6 or SP7) this application was running without problems. Of course I thought that this can't be. So I uninstalled SP11 and installed the old version (SP7). I configured the JCO-connection, no problems.
Now I know that this is not my mistake (hopefully ).
If I configured a JCO-connection in SP11 and tried to PING, the first PING was ok. After testing the connection with user, the PING failed. The testing with user returns something like "user or password are not accepted".
Any ideas?
Best regards
Renald

In your SLD configuration, what do you have as your Logon Group under the message server config. Is it "PUBLIC". if so, then the user id needs to belong to that Logon Group in the system.
Regards,
Rich Heilman

Connection With Solution Manager!!!!

HI all,
01) Could anyone send me docs on How to connect Solution Manager With the ECC 6.0??
02) How to do Issue tracking with solution manager and use as a repository??
Thanks In advance
Regards,
Ami_Eka

Hi,
check following
How to generate EWAu2019s From Satellite Systems:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0f35bf3-14a3-2910-abb8-89a7a294cedb
SAP Solution Manager service desk:
please refer to the SAP Help Portal (help.sap.com -> SAP Solutions -> SAP Solution Manager -> SAP Solution Manager [current release] [Choose language] -> Service Desk).
https://websmp108.sap-ag.de/~sapdownload/011000358700000509252008E
Maintenance Optimizer:
https://websmp108.sap-ag.de/~sapdownload/011000358700000235502007E
regards,
kaushal
Edited by: kaushal malavia on May 27, 2008 6:12 PM

Best Practices to configure the connectivity with Bank and EBS

Hi All,
We are working on a requirement where Middleware(SOA) has to read the file from Oracle E-biz server and send it to BANK.
For Connectivity setup between Oracle E-biz and Middleware(SOA), Middleware(SOA) and BANK do we need to use oracle as user or we can use any user to communicate between E-biz and Bank?
Could you please share best practices/documents if you have any on how we should establish the connectivity and setup the workflow with Bank and E-Biz. E-Business
Thanks & Regards
Narendra

Hi Narendra,
Oracle User and the FTP user are 2 different users.
I'm assuming you'll be reading the file from R12 through File Adapter and writing it to Bank using FTP Adapter.
Oracle User is able to login into R12, do some operations, submit some concurrent programs/requests based on responsibilities and generate the file to be transferred (like in my case it did by running a Concurrent Request). The file so generated should be placed at a location from where File Adapter can read it within the BPEL process. Now to read the file, the user that is used is a SOA server user (again different from R12 user). This is the same user that you use to login into your SOA server physical box. Hence to be able to read the file, your file should have appropriate privileges (we set that as 777) so that it can be read by the SOA process (using SOA user).
FTP user, on the other hand, is the user that allows connection to Bank FTP server. This has absolutely no connection with R12. Bank who hosts the FTP server must give you the FTP user details that you'll use inside your FTP JNDI Configuration on Weblogic. When you deploy and run your process (you don't deploy adapter), it picks up the connection details from FTP JNDI properties that you defined in weblogic.
Hence both the jusers can be different and I don't think any best practices are required or do exist for this.
Regards,
Neeraj Sehgal

Problem to create a connection with Hypersonic database

Hi,
i'm using NetBeans 5.5.1 and JBoss 4.0.3SP1. Over Runtime-window i try to see and to use the JBoss's database, Hypersonic. But i become following exception:
(Socket creation error) The connection cannot be created with this driver: org.hsqldb.jdbcDriver.
This are the following configurations for my DB-Connection.
Name: HSQLDB
Driver: org.hsqldb.jdbcDriver
URL to the DB: jdbc:hsqldb:hsql://127.0.0.1:1701
Username: sa
Password : *****
Can anyone help me to solve this problem. Is it actually possible to create an connection with a hypersonic database?
Which databases are support by this Netbeans DB-Client?
Thank you
Best Regards

In general, NetBeans db client should work with any jdbc client database/driver.
Are you able to connect to the database from outside the ide (using a standalone java program)?
You may also want to take a look at :
http://www.netbeans.org/kb/50/jboss-getting-started.html
http://weblogs.java.net/blog/bleonard/archive/2006/04/elvis_meet_port.html

SAP NW 7.4 as java system sync with solution manager system 7.1 issue

Dear all,
I have installed SAP NW 7.4 system SP level is SP5 ,after that i have cheked in service marlket palce Now service market plkace latest SP level SP7.
For manula downlowd( directly from service market place) is difficult for java system and i have started sysnc with solution manager system to download patches through MOPZ.
Below are the activities completed:
1) Through template installed I have rgeisterd the system into Solman SLD.
2) Sync completed succfully exact product version is shwoing in solman SLD
3) after that I have checked in SMSY and LMDB its showing prefectly
4) But in SMSY its shwoing only under technical system,not showing product systems
5) I have assigned in product system in LMDB
Now the issues while selecting the system group and logical componensts I have created one logical componnets -but in that SAP NW 7.4 is not showing and I have assumed SAP NW 7.3 EHP1 after creating my newly create dsystem is not shwoing in drop down.
I ma getting belwo error.
No system found for this product/product instance
Message no. SOLAR_SPROJECT110
Please sugegst how to reslove the error ,and a;lso please let me know is there any way to download latest pathces to dpownload from service market place .
Advance Thanks

Hi,
re-check if the 7.4 system is correctly registered in the solman SLD system.
Re-check LMDB definition for your 7.4 as JAVA system. you have to manually created the Product system. Ensure all the Component and definitions are correct.
Also do a verrification run within the LMDB. This will confirm whether all the information is correctly defined.
Please note - SLD -> LMDB -> SMSY.
So, if the first 2 don't have the correct information, you wont have much joy with smsy.
Rgds
Deepak

Is it possible to use run-time configuration in conjunction with Session Manager?

I'm trying to avoid using MAX, basically because it's a pain for users to configure MAX when the application already knows what the configuration is. I actually get the configuration from a database, but that's another story. I've experimented with run-time configuration (see page 4-31 of the 'IVI Driver Toolset' manual) and it works fine. However, when I try to use this in conjunction with Session Manager, session manager complains that my logical name is not a driver session name. I suspect that Session Manager is looking up logical names from a different source, therefore run-time configuration won't work. Any suggestions? I've attached the files I'm working with.
Attachments:
SessionMgrTrial.zip ‏41 KB

Hello Mark:
The Session Manager GetLogicalNames method does not distiguish between logical names and virtual instrument names. A user of the method cannot ask for just logical names or just virtual instrument names. Right now you always get both. The new function is called InstrSessionMgr.GetNames. Notice that the online help file says Boolean for the flags parameter when it is an enum.
Hope this helps. If you have any further queries, please let us know.
-NI support
National Instruments - Software IS the instrument!
Attachments:
help.gif ‏22 KB

Source system connection with DW ?

Hi
Could you plz let me know how to create a source sys connection with DW ?
I am quite familier with creating a source sys with ECC & flatfile but now with DB .
In my project , i hv to extract the data from DW system ..but i do not hv idea to create a source system with DW .
out Basis also do not hv idea to do that , so if you could help me with step by step source sys connection with DW , that would be gr8 help for me .
Regards

Hi,
A connection between a source system and a BW system consists of a sequence of individual links and settings that are made in both systems.
· RFC connections
· ALE settings
·     Partner profiles
·     Port
·     IDoc types
·     IDoc segments
· BW settings
Read the following help on creating source system:
http://help.sap.com/saphelp_nw2004s/helpdata/en/ac/4a4e38493e4774e10000009b38f889/frameset.htm
http://help.sap.com/bestpractices/crossindustry/businessintelligence/v131/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
check the following links which shows BI extraction and you will also get to know how to connect them.
http://help.sap.com/bp_biv235/BI_EN/html/bw.htm
Cheers...
Puneesh

Problems to configure system connection with soa manager

Similar Messages

Maybe you are looking for