Problems to connect a linksys ea6500 to ps3

Greetings
The router doens't even find a ip adres on my ps3 but yesterday he found one. On my pc it works very fine the speed and signal are good. And the ps3 stands next to it so distance is not the problem.
I think i should work with a dmz, but i have no idea how that works
Thx in advance for the reply's .

Try this.
"change your user login setting to AIM, do not use .MAC setting
in user name field, type your full user name. example : [email protected]
it will not appear the password incorrect error."

Similar Messages

Linksys EA6500 Device List Connection Status - update process

I have the Linksys EA6500 with the latest firmware and have a question regarding the device list connection status.
Currently, I am seeing devices in the list that have a connection status of live, but they are not even within my home network.
What is the update/cycle time for the device list actually checking connection status of a device?
In my situation, it has been 3 days (72 hours) since the two device showing as connected have not been connected to my home network/router.
Noticed that this inaccurate connection status for these devices is also contributing to the Device Monitr app not showing correct device connection status info.
Would like to have real-time device connection status if possible. This device list is great way to know when device get connected or disconnected which helps me know when my kids get home from school or using game console when should be doing homework.
Thanks for your help.
Solved!
Go to Solution.

When you go to Troubleshooting > Diagnostics > Router configuration and clicked on Backup it is actually letting you save a backup of your configuration. It should prompt you where to save the file for you to use it later to reconfigure the router settings by loading it back on the router itself. I suggest that you do a hard reset on the router itself – push and hold the reset button using a pin or paper clip for 10-15 seconds then wait for the cisco light to go solid. Once the cisco light will turn solid access the router page again by typing in 192.168.1.1 in the address bar and load the backup that you have saved. Just go back to Troubleshooting > Diagnostics > Router configuration and click on Restore option. It will ask you to look for the backup config file that you have save and open it and the settings should be restored on the router. Check then if the same problem (device list) will be experienced.

Hi, i had recently bought a toshiba 3.0, 1.5tb hdd and i had to change the settings through Disk Utility on my mac to be able to transfer files from my mac to my HDD. The problem i am having now is, it wont connect to my TV or PS3? Can someone please help

Hi, i had recently bought a toshiba 3.0, 1.5tb hdd and i had to change the settings through Disk Utility on my mac to be able to transfer files from my mac to my HDD. The problem i am having now is, it wont connect to my TV or PS3? Can someone please help

"....and i had to change the settings through Disk Utility on my mac to be able to transfer files from my mac to my HDD"
What do you mean by that? Did you format?

E75 WLAN problem connecting to LINKSYS WAG200g

Hello all,
have problem with connecting my E75 with my ADSL router, the WAG200g, it is configured as "bridge only mode ", and i can access it using any PC by creating PPPoE (Point-to-Point Protocol Over Ethernet) connection to the access point, but using my phone, whenever i try to connect, i cant browse anything.
Any tips on how to configure my E75 with my WAG200g "bridge only mode" ??

anyone?

I need to replace my glitchy Linksys EA6500, how does the time capsule compare.

I am about to return the Linksys EA6500 for the second time in 3 weeks for constant failures, overheating etc. I have been a Linksys customer for years but lately their product quality has taken a dive. I bought the EA4500 less than a year ago and I could never get straightened out why my download speed was litterally cut in half. The EA6500 would work out of the box but developed same problems or lost internet completely and after multiple calls for 1+ hours with customer suppor I just give up.
So we have all mac devices now....iMac, 2 iPads, 3 iPhones and 2 itouches. I also run wifi to my TV for Netflix and Hulu and hard wired connection to my Directv. I also stream content (movies) from the iMac to my wifi TV.
So we basically stream alot, sometimes to mulitple devices all at the same time. I have been trying to find specifics, but I cant locate it. How fast is the transfer speed over wifi and can it handle the load? I dont want to buy this and find out it is just not up to our needs.
Thank you

How fast is the transfer speed over wifi and can it handle the load?
Assuming that you have new Macs and the Macs are located close to the router with clear line-of-sight, you might be able to achieve up to 450 Mbps speeds.
Any less than that type of setup is going to result in slower speeds, as the signal strength decreases rapidly once the signal has left the router. Any obstructions in the wireless signal path will really slow things down very quickly as well.
If you are asking about Internet connection speed, your network will be limited to the speed that your ISP provides to you. The bandwidth will be split up among any connected devices.
We could ask dozens of questions about your devices and home construction, but the bottom line will always remain that you will not know how well...or if...an AirPort router might do the job for you until you try it out in your home.
For that reason, if you decide to try an Apple router, it would be a good idea to understand the store's return policy in advance, before you buy.

Just connected a Linksys plw400 extender to my wifi network & IPad 2 looses Wifi connection

Just connected a linksys plw400 to my wifi network and now my ipad2 can see the network but cannot connect. When I disconnect the linksys plw400 my IPad2 will connect albeit a weak signal which is why I bought the extender which works fine with my Dell laptop and Galaxy S3 can anyone help me with this issue?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Problems with connecting xbox 360

i cant connect my linksys wireless router (model wrt54gs) to my xbox 360, can anyone help.

Are you trying to connect wirelessly or wired?
Try being more specific to the problem like is your ip or dns failing maybe
(You do know that you have to buy a game adapter for the 360 if you are trying to play wirelessly cause its not built in.)
Message Edited by JustaGamer on 04-13-200701:52 PM

Problem getting connection to work with WRT54G and iPod Touch 4G

Hi, I just recently received a brand new iPod Touch 4G and I seem to be having connection troubles with it. This has also happened on my previous iPod (an iPod Touch 1G). This router has a pretty old firmware from like 2006. The problem is not that I can connect to the router and get the ipod to show the checkmark, but it is that I cannot get any network connection through the router. I have a Windows 7 laptop that connects perfectly fine using the router. Also, I believe my Nintendo DS Lite can connect flawlessly as well. I noticed that there seems to be a bit of trouble with Apple products connecting to Linksys routers in general. Does anyone know what may be causing my connection issues? When I got my iPod Touch 1G, it wouldn't connect from the get-go so I just ignored it and used the wifi at my university whenever I went there during the day.
If I need to provide any technical information, I can because I have access to the setup for the router. Thanks. :-)

Try changing the security mode to WEP and see if that works.
Open the setup page of the router.
Click on Wireless tab and go to Wireless MAC filter sub tab. Make sure that Wireless MAC filter is disabled on the router.
Try to upgrade the firmware on your router.
Connect the computer with the Ethernet cable to the router.
Download the latest firmware from Linksys website and save it on your computer. Open the setup page of the router. Click on Administration tab and go to Firmware upgrade sub tab. Browse the firmware file that you have already downloaded and upgrade it on your router.
After upgrading the firmware on the router, it is recommended that you should reset the router and reconfigure it. Press and hold the reset button on the router for 30 seconds. Release the reset button and wait for 10 seconds. Power cycle the router and reconfigure it.
Change some advanced wireless settings on the router. Click on Wireless tab and go to Advanced wireless settings. Change the Beacon interval to 75, RTS threshold to 2307 and fragmentation threshold to 2306. Save the settings.

Linksys EA6500 router power light blinks slowly, not reachable

Hoping somebody can help me with this. I bought a Cisco Linksys EA6500 router a couple of years ago. For various reasons I ended up not actually unboxing it until today. It got left at my mom's place and well, it just didn't get unboxed until today. I connected it, ran the Setup disc and after a little bit of trouble, I got it to work OK. I was using the Admin panel and setting the guest network password etc. Everything seemed great. But then I had the idea to upgrade the Firmware, because I figured the router was a couple of years old, it probably needs a Firmware upgrade. From the admin page I clicked the "Check for upgrades" to the Firmware, but it gave me a red error message "Upgrade server not available" (or something to that effect). I clicked instead on "Manual update" and I had downloaded this file: FW_EA6500v2_1.1.40.166281_prod.img The firmware upgrade process started, there was a progress bar that went for a while, and when that reached the end, I got a spinning wheel animation. This however, never went away. Just spun and spun. I went for a coffee, came back 15 minutes later, it was still spinning and nothing else had happened. I looked at the router itself, and the white CISCO power led on the front of the router is blinking slowly. Kind of fading up and down. I waited another while and then I had waited probably 20 minutes, so I gave up and unplugged the router from the power, waited a few seconds and plugged it back in. Ever since I did this process, it's like completely dead. The CISCO power led is fading up and down. I've tried a 30-30-30 reset. I've connected it to a PC ran the setup program (EA6500v1.2.0.14212.1-Setup.exe). The setup program just reports that it can't reach or find the router. It's like completely broken. I've tried it with two different PC's. None of them can even acknowledge that the router exists. Meanwhile, the power light keeps fading up and down... I only got about 15 minutes use out of my brand new (albeit unboxed for 2 years) EA6500 before, it appears, the Firmware upgrade process completely broke the whole thing. Since my computer doesn't even manage to connect to the router on ANY level, I'm unable to see or change any settings or anything like that. I do have the "reset" button on the back of the router and I've tried it several times (including holding it for over 1 minute), but nothing makes any difference. Sorry about the lengthy post.... I probably could have explained this shorter: Router unresponsive - power LED fading up/down - Setup program does not find router. Anybody able to offer any help?? Thanks in advance.

If you have already tried to use other browsers or computer, try the management mode process. 1st you will need to download the firmware file and teh TFTP software. connect your computer to the modem inorder to have internet access (set your IP to obtain). Download the firmware here: http://www.linksys.com/us/support-article?articleNum=148365 TFTP software is available here: http://downloads.linksys.com/downloads/Tftp.exe Reconnect the computer back to the router and set it back to static IP. Follow this reset process in this link: http://www.linksys.com/ru/support-article?articleNum=140001 If it asks for a firmware, upload the file. If that doesn't work, proceed with TFTP upgrade. This link will help: http://www.linksys.com/us/support-article?articleNum=137928 I hope that helps!

Problem in connection from SAP to XI

Hi Guys,
I have problem to connect from SAP to XI. We have existing SAP R/3 (IS-H) and we newly installed XI. We decided to use ABAP proxy to send data from SAP to XI. When I go to SPROXY system showing No Connection to Integration Builder. Please kindly advice what configuration we need to in SAP side in order to connect XI.
Its Very Urgent. Please advice me.
Thanks in Advance.
Regards,
Anil.

Anil,
could you please have a look to SAP Note 689847 - XI 3.0: SPROXY - No connection to the Integration Builder
Cheers,
-Sunil

Problem with connecting and syncing (quicktime.qts)

Hi,
I have a problem with connecting and syncing my Iphone to itunes.
iphone alone on PC -> uploading files (fotos) is possible
itunes starts normaly, if iphone is not conected.
if i connect iphone after starting itunes, or if i start itunes after connecting iphone i get an itunes-error with message:
AppName: itunes.exe AppVer: 9.0.2.25 ModName: quicktime.qts
ModVer: 7.65.17.80 Offset: 00909a47
i test different things...
- used another USB-port
- used another PC
- used macbook of my wife instead PC
- deinstalled and new installed of itunes (older and newer versions) folow tutorials of apple
- use another USB-Cable...
I'm resigned, Please help me..
Tom

AppName: itunes.exe AppVer: 9.0.2.25 ModName: quicktime.qts
In this context, that can sometimes indicate trouble with a content file on the phone (or Touch).
Do you have any podcasts stored on the iPhone at the moment? If so, if you delete them from the phone, can you connect to iTunes without the error?

HT204053 I have a problem. I bought Pages and Numbers for my iMac and so far everything was OK. Suddenly i have a problem with connection to iCloud. Dokuments created on iMac in Pages or Numbers are not transfered to iCloud. Not uploaded in iCloud.

I have a problem.
I bought Pages and Numbers for my iMac and so far everything was OK.
Suddenly i have a problem with connection to iCloud.
Dokuments created on iMac in Pages or Numbers are not transfered to iCloud. Not uploaded to iCloud. There is a sign (small shape of iCloud), that they are waiting to be uploaded to iCloud.
I think the iCloud is OK.
i can see and manage documents in iCloud. i can create them on iPad and see them and delete them in iCloud.
But not on iMac.
i dont know what has happened and I am not abble to find the solution. It was OK till some days ago….

I have a similar problem! Everything stopped working after upgrading to Mac OS 10.8.4 through the App Store. Help!

I have problem to connect iChat. Sometime work and some time not working. When it was not working, there was a message on screen and said the mobile be server was not working. I needed to turn off computer and restarted the computer. Then it might. work

To whom it may help,
I use my iChat to do video chat with my granddaughter. I used to do iChat without any problem to connect with her in New York. However, After Mobil Me account closed, I accounted connection problems frequently. Sometime, I had to turn-off my computer then re-started the computer to make it work again. . When I had this problem to connect on iChat (the Mac did not allow me to choose "available"), the poped out window message said that " the iChat lost the Mobil Me account [email protected]" "The server connection was unexplected disconnect". Do you know what is my problem? My Apple ID for iCloud and previous Mobil Me account should be [email protected] I am no longer using [email protected] for Mobil Me e-mail address. My current iCloud e-mail address is [email protected] is no longer of using [email protected] account for my e-mail. If this is the problem, please let me know how to remove the [email protected] account from your system. Thanks!
David

SadisticIron wrote:
i just baught my first iphone and it is a jalbroken
Buzz! Thank you for playing!
Discussing jailbroken devices is forbidden here by the Terms of Service.
You can not get help here.

Problem with connecting to a website. Just purchased a new iMac with Version 10.10.2 Yosemite. Once in a while I have trouble connecting to a site. It takes forever. Is this an issue with Yosemite or my internet service?

I purchased this iMac in Feb. 2015. When I try to connect to a web site using Safari or Google Chrome I usually have no problems getting connected to the site. But maybe once a day I will try to connect and I will see the blue progress bar at the top of the screen showing it is trying to connect and then it just stops. It may take a couple of minutes before it connects to the site.
Would this be a problem with OS X Yosemite Version 10.10.2 ? Or would this be a problem with my internet company?
Thank you,
Laurie

Hi lauriefrommi,
Welcome to the Apple Support Communities!
i understand that you have some intermittent webpage loading issues while using Safari on your Mac. In this situation, to ensure that Safari is working as it should, I would suggest reading over the attached article and using the information to make sure Safari has no unsupported third-party add-ons.
Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues - Apple Support
Best regards,
Joe

Problem with connecting to free wifi after upgrading to Windows 8.1 from Windows 8

Hi
I had problems with connecting to free Wifi after upgrading my PC(Notebook) to Windows 8.1 from Windows 8. As I travel a lot within europe, I am used to being able to connect to Free Wifi(those that dont need a key or password to enter) but soon after downloading
Windows 8.1 I almost never was able to do this. I'd always get «LIMITED» even though the signal was strong.This was so fustrating,so much so that I reset my PC to clear it of Windows 8.1 and am now back to Windows 8.This is a shame because I was really liking
using Windows 8.1 and if not for this problem(which is a big one) I'd still be using it. If I download Windows 8.1 again from the Windows store what is the probability that I'll have the same problems?
Thanks Portozzygirl

More often than not when a device isn't working it is because the driver has become corrupted. Re-installing a fresh copy should help
http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isnt-working-properly?SignedIn=1
http://captaindbg.com/how-to-update-drivers-on-windows-7/ (works on win 8 too)
Wanikiya and Dyami--Team Zigzag

Problems to connect a linksys ea6500 to ps3

Similar Messages

Maybe you are looking for