Problems to connect jam and mic from apogee

Hi, can anybody help me, there is something wrong on my conexion? I did not have problems with jarage band
Thank you

Hi Nach71,
Thanks for using Apple Support Communities.
The following Wi-Fi base station settings are recommended to ensure maximum performance, security, and reliability when using Wi-Fi.
For more information on this, take a look at this article:
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
Best of luck,
Mario

Similar Messages

Connect Headphone and mic

In order to use Google phone, I want to purchase a combination mic. and headphone to connect to my mac mini, but I can't figure out how to connect to the mini. Will it connect into a usb connection or is there jack receptical to include the mic. Thank you.

RJ and Omug: Thank you for your helpful response.
However, I have found on line a USB adapter that will accept the mic and headphone combination with two individual jacks. Will the a headphone and mic with two individual 3.5 mm jacks work on my mac mini by using the USB adapter with a powered USB hub? There seems to be more selection at a lower price with the two individual jacks and the adapter rather than the usb connected headphone/mic.

Problem in restore software and files from time machine to new hard disc

hello, recently im just change my macbook's hard disc, and i can't open any of my software and also the finder is keep no responding after i restore my files and software from time machine. Got any solution about it?

I see. Don't do that. I do not believe using Migration Assistant is a valid method of accomplishing what you intend.
Furthermore, unless you are using the "Enter Time Machine" feature, you really shouldn't pick and choose what you want to copy from a Time Machine backup... "no user serviceable parts inside". You can certainly find and individual files and folders in the Finder, but you will run into the permissions problems you describle. I would not attempt to circumvent those protections.
As I understand Time Machine, you must either restore a volume from a Time Machine backup, thereby erasing the volume first, or restore individual files and folders by using "Enter Time Machine" when the backup has already been properly designated for the source.
Since your replacement hard disk - the source, now - is technically new, the latter is not an option. It's as if you were trying to restore to a different computer. This can't be done.

Urgent problem in connecting servlet and oracle

Hi
I have problem in connecting servlet with oracle.Kindly let me know what all the classes i should include in classpath to get connected.Where will i find the oracle driver.Kindly help me to do this.
With regrds
Vaiju

http://www.oracle.com/technology/tech/java/sqlj_jdbc/htdocs/jdbc_faq.html
http://www.oracle.com/technology/sample_code/tech/java/sqlj_jdbc/index.html
http://download-west.oracle.com/docs/cd/B10501_01/java.920/a96654/toc.htm
http://www.oracle.com/technology/software/tech/java/sqlj_jdbc/index.html
http://www.oracle.com/technology/sample_code/tech/java/codesnippet/jdbc/index.html

If anybody have a problem with connection to smtp server from iPhone

If anybody have a problem with connection to smtp server just add new server
Seetings → Mail, Contacts, Calendars → User Me account → Account → Under Advanced choose Mail → SMTP → Add Server
smtp.me.com
user name ([email protected])
password
Apple, i am in love with your product, please fix this so we could injoy it even more.

Might be something to help you here > iCloud: Mail server information

Problem in connecting to times ten from jsp

Hi sir,
I am trying to connect with timesten from jsp. But am getting following Exception.
SQLException: Problems with loading native library/missing methods: no ttJdbcCS70 in java.library.path
I am using myeclipse 8.6 ide. I have diployed my project in myeclipse tomcat server.
Please help me in resolving this problem.
Follosing is my code.
display.jsp:
<%@page import="com.tbss.RealTimeDAO,com.tbss.RealTimeCallReport,java.util.*"%>
<%
RealTimeDAO rdao=new RealTimeDAO();
List<RealTimeCallReport> list=rdao.getRecords();
pageContext.setAttribute("list",list);
out.print("list"+list+"\n");
Iterator<RealTimeCallReport> i=list.iterator();
while(i.hasNext()){
RealTimeCallReport rp=i.next();
out.println(rp.getCompaignID()+"\t"+rp.getConnectedPhone()+"\t"+rp.getRecordID()+"\t"+rp.getSessionDuration()+"<br/>");
%>
RealTimeDAO.java
public class RealTimeDAO {
public List<RealTimeCallReport> getRecords(){
List<RealTimeCallReport> list=new ArrayList<RealTimeCallReport>();
try {
// create the TimesTen data source and set the connection URL
TimesTenDataSource ttds = new TimesTenDataSource();
ttds.setUrl("jdbc:timesten:client:dsn=ttc1;UID=ttsa;PWD=abc123");
// connect to the TimesTen database
TimesTenConnection ttcon = (TimesTenConnection) ttds.getConnection();
// create and execute the statement
Statement stmt = ttcon.createStatement();
ResultSet rset = stmt.executeQuery("select * from REAL_TIME_CALL_REPORT");
// process the result set
while(rset.next()) {
RealTimeCallReport rp=new RealTimeCallReport();
rp.setCompaignID(rset.getLong("CAMPAIGN_ID"));
rp.setConnectedPhone(rset.getLong("CONNECTEDPHONE"));
rp.setRecordID(rset.getLong("RECORD_ID"));
rp.setSessionDuration(rset.getString("SESSION_DURATION"));
rp.setSessionID(rset.getString("SESSION_ID"));
list.add(rp);
return list;
} catch(SQLException e) {
e.printStackTrace();
return null;
}

The driver requires a shared library (nothing to do with java itself.)
The shared library is not in the shared library path. The error suggests that the OS is Windows which means that the PATH (env variable) of the executable must have the directory of the shared library in it.

Problems in connecting to windows domain from a L3 switch

Hello,
I have a Cisco L3 switch with two subnets on that switch. I dont have vlan for each subnet, all i did is confiugred two IP's for the single vlan, meaning the switch will have a IP in the server subnet and a secondary IP in the client subnet range. For the client subnet, the secondary IP will be the gateway and for the servers, the primary ip will be the gateway.
The issue is the Domain controller is in one subnet and the clients are in another subnet.
Because of this they are not able to see each other and the clients cant join the domain. Also the DHCP is not working,meaning clients are not getting an IP from the DHCP server. The scope is set to the range of Client IP range.
The only way to fix this, i have given dual IP's to this DC and then the systems clients started joing the domain.
I dont want to have the server with dual IP's.
What is the best way i can ensure that my Domain is in the server subnet and the clients who are in client subnet can join them over the Cisco L3 switch as both the server subnet switch and the client switch connected to the L3 which acts as the core switch at the site.

hello,
Thanks for your reply.
Sorry that i didnt tell earlier that every thing works fine except the DHCP/Domain issue. This shows routing is ok.
Also i have complaints saying that when i have a user setup with a client ip, the performance is very slow, the moment i change that to a server IP range, the performance is very good.
The pity here is both for the client ip range and the Server IP range, the gateway is the L3 as i have configured dual IP's for that vlan in the L3, one for the Client IP range and the other for the server IP range.
The DHCP server will start issuing IP's to the client when the moment i change the IP of the DHCP server to the same range as that of the scope, i mean when i assign an IP to the DHCP server in the client IP range.
Both the DHCP and domain are the same machine and hence i have both problems ie DHCP not working and clients not able to join the domain.
think it should be some kind of broadcast issue here since both the DHCP and the Domain uses broadcasts.
I have tried using ip-helper address as well and still no luck :(

G4 AGP, problems with Graphic Cards and booting from Install DVD

I bought a G4 AGP (with DVD) on Ebay. It has Mac OS9.2 installed and its working correctly so far. It has an additional GraphicsCard in a PCI Slot, on which the Monitor is connected.
1. The AGP Card doesn't give any output signal... I wondered if this would be the reason that somebody installed the additional Card...
2. The AGP Card doens't show up in the Profiler... is this normal? According to other users this seems to be a common issue...
3. I would like to install X 10.4, but when booting from CD, the process stops after a few seconds... and there is no signal on none of the video cards. I tried to remove one or the other card but no luck...
the firmware is uptodate and the Install DVD is correct aswell, I just bought it from AppleStore...
I don't have any original CDs available, so I cant run a hardware test.
Anybody?
G4 AGP Mac OS 9.2.x

The AGP Card doesn't give any output signal... I wondered if this would be the reason that somebody installed the additional Card...
Probably. I'd take out the bad original card and replace it with the additional card. Then, check and see if that's what caused the problem. Then only other choice is to take it to the Apple store and have them check it out.
I don't have any original CDs available, so I cant run a hardware test.
You can either contact the seller and complain about the missing disks or buy replacement disks for your machine. Give 1-800-MY-APPLE a call. The AHT disk should cost about $20. I don't know what the others would run.

Problem with shell commands and scripts from an Applescript Application

Hi-
I am fairly new to OSX software development. I am trying to build an application that creates a reverse SSH tunnel to my computer and starts OSXvnc. The idea is that my Mom or anyone else who needs help can connect to me without having to tinker with their firewalls.
There are plenty of resources on how to do this, and I have found them. What I have a problem with is the following.
I am building this application in Xcode as an Applescript application, because Applescript and shell scripting are the only forms of programming I know. I use an expect script to connect through SSH, and a "do shell script" for the raw OSXvnc-server application to allow screen sharing.
The problem is that when I click on the button to launch OSXvnc-server or the button to launch SSH, the application freezes until the process it spawns is killed or finishes. For example, I can set SSH to timeout after 60 seconds of no connection, and then the Applescript application responds again. I even tried using the ssh -f command to fork the process, but that doesn't seem to help.
I am also using "try" around each of the items.
What am I doing wrong? How can I make the buttons in my app launch SSH and OSXvnc-server without hanging the application while it waits for them to finish?
Thanks so much!

See here for an explanation of the syntax.
(20960)

Problem in connecting S-Video cable from T42 to my TV- Nothing showing in my TV

Hi ,
I need your help in S-Video cable . When i am connecting my labtop ( T42 ) to my panosonic TV ,my TV doesn't show the anything from my primary screen ( labtop ) , I tried to do everything all drivers, adapters and window updates etc. But still could not get the picture on my TV with S-Video cable. Ihave tested S-video cable and it works fine for other labtop. Any help in this will be really appriciated.

you got to switch on the option for TV screen output from laptop, if you are using T42 with ATI graphics card, just get the latest Catalyst driver for ATI, it has an option for TV screen output.

PROBLEM IN CONNECTING to ORACLE 8i from DEVELOPER 6

I have installed oracle8i Enterprise edition version 8.1.5, on an NT Machine (local database). I have access to database Using the SQL*PLus came with Database software, but unable to connect to database from developer rel 6.0. or SQL*Plus 8.0.5 . If any of you know the solution PLEASE LET ME KNOW.
Thanks in advance

I am trying to connect to the latest version of Developer 6.0 to Oracle8i database. I can't get a connection. Have been trying since 1/5/00. I have called and emailed Gina at Customer support. I get a ORA-12203 error after trying all solutions. The support comes by email about every 3rd day. It's very poor and the solutions haven't gotten me running yet.
I am able to connect SQL*Plus 8.0 and all Oracle8i tools by entering no connect string, but nothing else.
Will watch this area hoping for some help. I don't think Oracle is going to get me going.

Problem to connect to a database from an Excel pivot table

Hello,
I have Office 365 private. I could connect to the database and then all of a sudden it stopped and when i wanted to refresh the pivot table i got the following error: "an error was encountered in the transport layer", then i click OK and
i get a prompt to logon to the database which I do and get this message: "Errors in the OLE DB database. The Integrated Securty property cannot be set if a username and password is supplied". Again, i could connect without any problem and since few
days it stopped.
thank you in advance for any help,
Arma

If the database you mentioned is a Cube, please check the post:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/b2861abd-0060-4efb-970b-bf455731f5a9/an-error-was-encountered-in-the-transport-layer?forum=sqlanalysisservices
Best Regards,
Wind

Problem in connecting Non Oracle Database from Oracle

Hi:
I want to access "MS ACCESS" from Oracle 10g (10.2.0.1) using Windows XP.
I tried my best, applied all proper instructions I found from books and from Internet, but getting an error.
Here is what I did:
My Oracle database is called "ORCL" and "MS ACCESS" is called "access_1".
There is only one table "Employees" in "access_1".
1. Accessed ODBC from Start | Control Panel | Administrative Tools.
2. Clicked on Users DSN | "access_1" | Add.
3. Clicked on "Drive do Microsoft Access (*.MDB)" .
4. Hit Finish.
5. Entered at DATA SOURCE NAME "ODBC1" and at DESCRIPTION "Connect Oracle to MS Access". Also I clicked on SELECT and chose the "Access_1.mdb" which is located at "C:\Documents and Settings\Muhammad\My Documents" folder. Clicked OK. and clicked on OK again.
6. Now I went to Oracle side and configured listener as follows: (Only portion is shown here)
# listener.ora Network Configuration File: C:\oracle\product\orcl\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\orcl)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = hsodbc)
(ORACLE_HOME = C:\oracle\product\orcl)
(PROGRAM = hsodbc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = RIYAZDESKTOP)(PORT = 1521))
7. Configuring the hs file located at C:\oracle\Product\Orcl\hs|admin as follows:
# HS init parameters
# HS_FDS_CONNECT_INFO = <odbc data_source_name>
# HS_FDS_TRACE_LEVEL = <trace_level>
HS_FDS_CONNECT_INFO = odbc1
HS_FDS_TRACE_LEVEL = OFF
# Environment variables required for the non-Oracle system
#set <envvar>=<value>
8. The TNSNAMES.ORA File is located at C:\:\oracle\product\orcl\network\admin\ and has the following text (only the related text is shown here):
# tnsnames.ora Network Configuration File: C:\oracle\product\orcl\network\admin\tnsnames.ora
# Generated by Oracle configuration tools
access_db.world =
(DESCRIPTION =
(Address = (PROTOCOL = TCP) (HOST = RIYAZDESKTOP) (PORT = 1521))
(CONNECT_DATA = (SID = hsodbc))
(HS=OK)
9. The database link is created as follows:
SQL> create database link access_db USING 'access_db.world';
Database link created.
SQL>
10. Now the test and selection:
SQL> select * from employees@access_db;
select * from employees@access_db
ERROR at line 1:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from ACCESS_DB
OH! I HAVE TO RELOAD THE LISTENER AND I DID IT HERE.
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\oracle\product\orcl\BIN>lsnrctl reload
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 17-NOV-2006 17:51:26
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
The command completed successfully
C:\oracle\product\orcl\BIN>
SQL> select table_name from all_tables@access_db;
select table_name from all_tables@access_db
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Generic Connectivity Using ODBC][Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified (SQL State: IM002; SQL Code: 0)
ORA-02063: preceding 2 lines from ACCESS_DB
I HAVE DONE IT EXACTLY WHAT YOU PROVIDED ME BUT GOT THE SAME RESULT.
ANY SOLUTION!
THANKS.

see Connect 9i to Microsoft Access Database

Problem extracting red, green and blue from ColorModel

Hi everyone,
I'm attempting to write a piece of code to extract the red, green and blue components from an image using the ColorModel class. When I attempt to run my code below, I get the following error: Exception in thread "main" java.lang.IllegalArgumentException: More than one component per pixel. Does anyone know how to extract an integer representation of the red in a pixel in order to solve the problem? Here's the code snippet:
public void getRGBValues()
          String imageFilename = new String("C:\\Documents and Settings\\David\\My Documents\\My Pictures\\blue hills1.jpg");
         PlanarImage image = JAI.create("fileload", imageFilename);
         //Get the color model for that particular image
         ColorModel imageColorModel = image.getColorModel();
         //ints to store the appropriate values for each colour component
         int totalRed = 0;
         int totalGreen = 0;
         int totalBlue = 0;
         int averageRed = 0;
         int averageGreen = 0;
         int averageBlue = 0;
         int pixelNumber = 0;
         int pixelCount = 0;
         //Loop to extract the colour values out of each pixel in an image passed into the class
         for(int i = 0; i < image.getWidth(); i++)
              for (int j = 0; j < image.getHeight(); j++)
                   totalRed += imageColorModel.getRed(pixelNumber);
                   totalGreen += imageColorModel.getGreen(pixelNumber);
                   totalBlue += imageColorModel.getBlue(pixelNumber);
                   pixelCount++;
                   pixelNumber++;
              pixelCount++;
              pixelNumber++;
         averageRed = Math.round(totalRed / pixelCount);
          averageGreen = Math.round(totalGreen / pixelCount);
          averageBlue = Math.round(totalBlue / pixelCount);
          System.out.println("Average red is " + averageRed);
          System.out.println("Average green is " + averageGreen);
          System.out.println("Average blue is " + averageBlue);
}

You are misunderstanding the ColorModel methods. The color model can translate between colors and pixels, but it doesn't know or hold pixel data.
I don't know the JAI, but if you use J2SE classes like BufferedImage, this is easy to do:
BufferedImage im = ImageIO.read(input);
int argb = im.getRGB(x, y);
int r = 0xff & (argb>>16);
int g = 0xff & (argb >>8);
int b = 0xff & argb;

After Leopard upgrade problem w/dvd drive and wake from sleep

Hi,
Bought a NEW install disk to upgrade my 15" Aluminum PB (1.67gh, 1 GB Ram,) from 10.3.9. Upgrade went fine, then again did an online upgrade fo software from 10.5 to 10.5.8. Mostly running well. However! There are two problems:
1. The DVD drive no longer workds, it just spits out DVDs. Now I never had a problem with it before the upgrade and I actually used it for the upgrade dvd. I'm talking, like 5 minutes after the upgrade completed the drive no longer accepts DVDs.
2. My PB was always a sleepy fellow, like many PB, having some problems every now and again waking from sleep. But this is now almost consistent, every time. And usually I could hear fan noise, or at least a spinning drive. This is just black screen and, even with the lid open, the white light keeps pulsing. Even the restart button does nothing, and I have to unplug it and remove the battery. Then, of course, it will boot up fresh.
Any ideas on either of these two annoyances?
Thanks in advance for your help,
Debbie

If the PRAM battery hasn't been replaced in the last 4 years, check to see that it is. That may be a costly operation, so call around.

Problems to connect jam and mic from apogee

Similar Messages

Maybe you are looking for