Problems to import Samsung NV24HD movie clips into iMovie08

I have a Samsung NV24HD Camera:
- iMovie recognizes the camera
- iMovie shows that there are film clips, but without thumbnail content
- iMovie creates an error message after clicking on the import button -> iMovie can't import the video files, I should check them!
What can I do ?
thx in advance.
kd

im not an expert but you might need to search for a converter. or buy Final Cut Express which recognizes lots more formats but is a bit more complicated to use.
Hope it helps

Similar Messages

  • Capturing and Importing a DVD movie clip into iMovie

    I am making a movie of my trip to Vegas.
    I need to capture 20 seconds of video off of a DVD and
    insert it into my home iMovie.
    Any suggestions how to capture the clip, what format to save
    it in and how to import it to the iMovie template?
    Thanks in advance!

    NJ Ron wrote:
    .. Any suggestions ...
    yepp, make use of the Search Feature of this board
    welcome NJ Rose to the  iMovie baords ..
    usual advice:
    DVDs are in a socalled delivery format (mpeg2), which isn't meant and made for any processing as editing...
    in recommended order, choose one of the following tools/workarounds:
    DVDxDV (free trial, 25$, Pro: 90$)
    Apple mpeg2 plugin (19$) + Streamclip (free)
    VisualHub (23.32$)
    Drop2DV (free)
    Cinematize >60$
    Mpeg2Works >25$ + Apple plug-in
    Toast 6/7/8 allows converting to dv/insert dvd, hit apple-k
    connect a miniDV Camcorder with analogue input to a DVD-player and transfer disk to tape/use as converter
    http://danslagle.com/mac/iMovie/tips_tricks/6010.shtml
    http://danslagle.com/mac/iMovie/tips_tricks/6018.shtml
    http://karsten.schluter.googlepages.com/convertdvdstodvs
    (advice is for imports to iM... )
    none of these methods or tools override copy protection/DRM mechanisms.. advice on 'ripping' is a violation of the ToU of this board ..
    be nice to copy rights ...

  • Problem with "Import"; Trying to move song into FCE

    The answer may be deceptively simple, but it eludes me.
    In the past I merely dragged/dropped a song from my iTunes folder into FCE to begin my project. The only files I have chosen to date were mp3 files. There was no problem encountered whatsoever.
    Today, the song I chose is not allowed into FCE and the only correlation is that I purchased the song in the iTunes music store and it has an extension of m4a. There error message: "File error: unknown file"
    What am I missing?

    Thank you, Tom. Very helpful and I do believe my problem will be solved. However, what makes this a bit of head scratcher for me is that I tested an "import" with another song that I purchased from iTunes music store with no problems.
    I don't expect you to know, so thank you so much for the link. I will attempt the workaround right now

  • Importing MOV clips into Premier Elements 10

    I'm trying to import Qucktime MOV clips into Adobe Premier Elements 10 but they install as audio files only. How can I get them to load as video clips so I can construct a movie from them?

    Hi
    I'm using a Mobius 1080p HD camera shooting in HD producing MOV files.
    I've inspected one of the files using Quicktime/Windows and the information is
    Format - H.264. 1920 x 1080. Millions 16 bit Integer (Little Endian). Mono. 32.000 Htz
    Movie FPS = 30.00
    Playing FPS = 30.00
    Data Size 401.47 MB
    Data Rate 18.19 mbits/sec
    Duration 00.03.05.00
    Normal Size 1920 x 1080 pixels
    Current Size 1920 x 1080 pixels
    The clips play in excellent quality HD and without a problem in Windows Media Player
    I have reformated some in MP4 format and they will play back in Premier Elements after a fashion.. but very slow and jerky making editing just about impossible. I have reloaded Adobe Premier Elements on another computer but get the same results.
    It appears Adobe Premier Elements is not up to dealing with these files.

  • Error -2002 when importing quicktime movie clips into iMovie Project

    When I import QuickTime movie clips into my project, the scroll bar fills about 1/3 of the way, and then I get this message:
    Can't open file "DSCN0812.MOV"; skipping it and continuing. I CLICK "OK," and then this message appears:
    Error during import
    The file could not be imported: (-2002)
    This happens to every movie clip. Anyone have any idea what's happening here?
    Thanks!

    Paul Kirtley wrote:
    .. file "DSCN0812.MOV"..
    The file could not be imported: (-2002)
    I guess, you try to import 'moving images' from a still cam, right? these are in a codec (=mov is no format, just a container) , iM doesn't support. Use the free tool *Mpeg Streamclip* www.squared5.com to convert these files to 'dv stream' BEFORE importing to iMovie.

  • Premier After Effects... How does one places the whole movie clip into AF?

    After years of using Premiere, I’m looking at using After Effects. Premiere does most of what I need (I don’t need moving graphics and titles) but the masking and rotoscoping seems to be better in After Effects. I’ve started a great video by Tom Green at school. This is probably silly question- I don’t understand is how does one places the whole movie clip into AF? I only see 30 seconds or so of the 5 minute clip on the timeline in AF.

    Ahh, thanks. I simply add more minutes (the length of the clip) into the "new composition".
    A new problem: When I try a dynamic link with premiere AE says “Failed to connect to adobe Premiere Pro Dynamic Link”, but PP will link with AE. I just installed AF last week. Do I need to uninstall and reinstall them (along with the rest of the Creative Suite)?

  • Export movie clip into a series of png(images)

    Hi Im using flash CS6 and I was wondering if it is possible to export a movie clip into a series of images, ie if there are 200 frames, convert the movie clip to 200 images...preferably png.
    Thanks all!

    We write blitting scripts(AIR) that essentially frame capture to create sequences or sprite sheets (RGBA32 png no problem)
    the only downside is you need to author a definitive start -> end to define the number of frames you want.
    if you nest a Bird flap with 5 frames clips inside a 6 frame hop then the clip will only loop perffectly if you author 30 frames...
    if you want to make it exactly 6 frames without skipping you need to manually unify these motions
    There is sprite packing software (such as texture packer) which will blit a swf [movieClip]; I  author traditional 2D vFX in flash, add some blur/glow and other tween FX such as advanced color/alpha changes. (make sure the timelines are unified) Bring the swf to Texturepacker and the thing blits out the sprite sheet wonderfully with all the movieClip filter FX.
    works great,
    too bad the native flash software can't do this.  in order to do it in flash you have to use graphic symbols. therefore the timelines must show you the animation and what you see is what you get.  And since they have to be graphics you don't get any movieclip filters blur/glow .  dissapointing

  • I have 3 consecutive movie clips that I am trying to drop into the drop zone but it only recognizes the first one and only produces the firts one in a DVD. How can I drop all three  movie clips into one drop zone

    On IDVD, I have 3 consecutive movie clips that I am trying to drop into the drop zone to create a DVD but it only recognizes the first one I dropped and only produced the first one in a DVD. How can I drop all three  movie clips into one drop zone.

    I have had some luck doing the following: Export each clip from imovie as a quicktime clip. Open iDVD and create a new project. Import a few stills into iDVD and then click on the button that gets created to get into the screen where the individual slides appear. Drag each quicktime into that screen and arrange in the order you want. You can then delete the stills. The button that appeared when you dropped in the stills will launch a complete show.

  • How do you combine two or more movie clips into one movie clip in iMovie '09

    how do you combine two or more movie clips into one movie clip in iMovie '09

    First create an iMovie project. Then drag the clips (or portions of clips) that you need into the project.
    When finished, use the SHARE menu to share the project.

  • I just stared having problems with importing files from nikon D810 into LR 5.7 it pop a window saying it can not read files on working on a imac 27" running yosemite on my mac pro after a few times it finally was able to read files and import them into LR

    I just stared having problems with importing files from nikon D810 into LR 5.7 it pop a window saying it can not read files on working on a imac 27" running yosemite on my mac pro after a few times it finally was able to read files and import them into LR I never had this problem before was there some kind of update that could of cause this?

  • When I import audio and move it into my timeline the project will no longer play?

    When I import audio and move it into my timeline the project will no longer play?

    The audio is a .wav file created in Audacity.
    The OS is Windows XP
    The verison is CS4
    I have included images of the Sequence settings and the playback settings because I was not sure what information you would need.
    I am not sure what you mean by waiting for the Audio to conform but I know I have imported the audio and gone back the next day and tried to place it in the timeline and it still did not work.

  • Bringing Movie Clips into ipod Touch

    I know there is a really simple answer to this, I'm just not seeing it (:
    I'd like to bring some .avi movie clips into the ipod but I don't seem to see how to do this. I've tried doing a drag and drop of the clip into the box under the 'Movie' tab in itunes, but that didn't work. Is there a place to put the clips where itunes sees them?
    Thanks in advance for any help.
    Stew

    You have to use itunes. Open the file in itunes and it will be added to the library and can be synced to your ipod if you select it in the movie pane.
    You can add videos other than those purchased from the iTunes Store to iPod touch,
    such as videos you create in iMovie on a Mac or videos you download from the
    Internet and then add to iTunes.
    If you try to add a video from iTunes to iPod touch and a message says the video can’t
    play on iPod touch, you can convert the video.
    Convert a video to work with iPod touch: Select the video in your iTunes library and
    choose Advanced > “Create iPod or iPhone Version.” Then add the converted video to
    iPod touch.
    User guide page 32

  • Cannot import Quicktime movie clips into i-movie 08

    How do you get QT movie clips from a Sony Digital Still camera which has a movie mode on it - into i-movie )08 ?
    I copied the movies in MPeg format onto an external HD (imported from PC Win Vista) and then they became QT movie clips. They just will not import into i-movie >

    I am a novice but I downloaded Perian software which allowed me to usemy Flip videos in avi format in iMovie.

  • Help please! quality problems converting HDMI movie clips into iMovie mp4

    I am importing HDMI movie clips from a canon powershot SX50HS camera into iMovie and building them into a single MP4 intended for YouTube.
    The movie clips appear clear as a bell individually in iPhoto whatever size I enlarge them to on the screen but are horrendously blurred in the MP4 movie- especially text.
    Help!!!! What am I doing wrong????

    Hi chrisluna123,
    If you are not already doing so, you may want to try importing directly into iMovie from the camera. You may also want to test the "Analyze for stabilization after import” function on a shorter clip to see if that helps. You may find the following article helpful:
    iMovie '11: Import video from your digital still camera or DSLR
    http://support.apple.com/kb/PH2148
    Regards,
    - Brenden

  • Missing audio tracks when importing mp4 movie clip into adobe premier trial

    I am trying to sanitize a movie clip by bleeping out the curse words in the clip. However when I import the clip on Adobe, I am missing 3/4 audio tracks; bringing the sound level way down. Can someone please assist me. I've been trying to fix it all morning!!

    More information needed for someone to help... please click below and provide the requested information
    -Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
    Exactly what is INSIDE the video you are editing?
    Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
    Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Maybe you are looking for