Problems to open a application after reboot the server

Hhi there
after some problems and rebooring the server, i cant open the appliaction anymore. i got the message "unable to connect to server"
I restarted the services allready and tried to figure out where is the problem in the log files etc. but without success.
the DB is working without problems. is it possible that the problem is in the firewall or ports? but then I'm wondering why it worked a few minutes before!
thanks for help!

I don't recommend increasing this setting unless you know for sure that you are experiencing performance or significant latency issues between the HFM application server and the database server. This setting simply allows for a 2 minute timeout rather than a 60 second timeout when HFM is reading or writing to the database. You would be better off correcting the underlying database or connectivty issue. If this were your issue, you would see some messages in the HsvEventLog.log file regarding HFM's repeated but failed attempts to connect to the database server during a SQL statement.
Also, this setting can be controlled through the EPM Configurator or Web and Server Cofiguration utility as well as altered directly in the registry as you've shown.
--Chris

Similar Messages

Raw device owners change after reboot the server

The raw device owner change after reboot the server. i have to adjust it manually like
chown oracle:oinstall /dev/raw/raw*
any idea to make it permanent after bouncing the Server?
MY OS is RHEL4 & Rdbms 10.2.0.1

I got my answer .
New to Linex. Need suggestions...
How i can create new file ? like i want to create file oracle.permission
should i use this command
touch <filename> or any other command?
second i want to put these entries raw device 3, 6,7,10,11 etc
shoud it work ? like in the oracle.permission directory?
# ASM
raw/raw[3671011]:oracle:dba:0660

Disk " disk " does not exist or is not instantiated after reboot the server

Hi,
I have one issue with 11gR2 cluster. I have 2 node cluster on CentOS 5.5. I am using HP MSA 1000 storage LUNs and create disk group and volume for RAC setup in openfiler.
The whole setup was running fine but before few days some one has recreate the database [clusterDB] using control file. I can see this from alter.log file of "oracle" user. And somehow one node is not able to up and running.
I have no idea what is going on so just restart both the nodes and storage one by one.
After restarting I can not view my ASM disk from /usr/sbin/oracleasm listdisks.
EvenI can not see the ASMdisk from /dev/oracleasm/disks... also I try to querydisk it showing that "Disk "<diskname>" does not exist or is not instantiated"
From the master node I can see the cluster registry configuration through "ocrcheck -config"
*./ocrcheck -config*
Oracle Cluster Registry configuration is :
Device/File Name : +ACFSDG
from the slave when I run the ocrcheck ...it gives error
PROT-602: Failed to retrieve data from the cluster registry
PROC-26: Error while accessing the physical storage ASM error [SLOS: cat=8, opn=kgfolclcpi1, dep=210, loc=kgfokge
AMDU-00210: No disks found in diskgroup ACFSDG
AMDU-00210: No disks found in diskgroup ACFSDG
] [8]
Any idea what is the cause behind this? There are many errors in $GRID_HOME/log/<hostname>.log file and other referring file. I might be sure that until I enable the ASMDISK/detect the ASMDISK I can not start crs...
Shall I try with restore operation of OCR or replace option in ./ocrcheck...will it usefull?
Let me know if you have already face this issue.
Thanks...
Edited by: user12039625 on Nov 12, 2010 5:30 AM
Edited by: user12039625 on Nov 12, 2010 5:36 AM

Hi,
Thanks for your reply.
I have "/dev/sd*" in my both the RAC nodes and on storage machine it was showing as "/dev/dm-*" whenever I run " fdisk -l " command... and I did this through iscsi initiatior and target and also create "Create Persistent Local SCSI Device Names ".
I also create one script "iscsidev.sh" in /etc/udev and it was perfectly working. Before this issue I was restarted the server and confirm it.
script is below
==============
# FILE: /etc/udev/scripts/iscsidev.sh
BUS=${1}
HOST=${BUS%%:*}
[ -e /sys/class/iscsi_host ] || exit 1
file="/sys/class/iscsi_host/host${HOST}/device/session*/iscsi_session*/targetname"
target_name=$(cat ${file})
# This is not an open-scsi drive
if [ -z "${target_name}" ]; then
exit 1
fi
# Check if QNAP drive
check_qnap_target_name=${target_name%%:*}
if [ $check_qnap_target_name = "iqn.2004-04.com.qnap" ]; then
target_name=`echo "${target_name%.*}"`
fi
echo "${target_name##*.}"
==============
Thanks...
Edited by: user12039625 on Nov 12, 2010 6:04 AM

After rebooting the server, SpamAssassin's recognition rate went worse

Always when I'm in need to restart the server, the spam recognition rate of SpamAssassin wents worse and many UCE mails are going through.
Does somebody has an idea why this happens and what can be done to solve this issue ? I investigated in many directions by myself, but haven't found a solution yet.

Hi Pavan,
When you uncheck the .NET Framework 4.5 checkbox in the Remove Roles/Features Wizard of Server Manager, Windows will check all roles/features that may also be installed as it would need to be removed as well.
In this case, please follow these steps:
1. Run the below commands in the Server Core’s command prompt window to help you recover:
DISM.exe /online /enable-feature /all /featurename:NetFx4
DISM.exe /online /enable-feature /all /featurename:MicrosoftWindowsPowerShell
2. The above commands will re-install .Net 4.0 and PowerShell on the server. Once PowerShell is installed, you can add the Graphical Shell (Windows Explorer) using the following command:
Install-WindowsFeature Server-Gui-Shell, Server-Gui-Mgmt-Infra
3. Once the GUI Shell is installed, you will need to restart the server with the following command:
Restart-Computer
Refer to:
Removing .NET Framework 4.5/4.5.1 removes Windows 2012/2012R2 UI and other features
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Raw device not seen after reboot the server

hi,
I hv upgrade kernal in linux 7.2 but when reboot system no raw device found
how can find out raw device

From http://www.fors.com/orasupp/unix/37914_1.HTM
Raw Devices and Oracle - 20 Common Questions and Answers
2. How can a raw device be recognised?
In the /dev directory, there are essentially two type of files: block
special and character special. Block special files are used when data is
transferred to or from a device in fixed size amounts (blocks), whereas
character special files are used when data is transferred in varying
size amounts. Raw devices use character special files; a long listing
of the /dev directory shows them with a 'c' at the leftmost position of
the permissions field, e.g.
crw-rw-rw- 1 root system 15, 0 Mar 12 09:45 rfd0
In addition, character special files usually have names beginning with
an 'r', as shown in the above example. Some devices, principally disks,
have both a block special device and a character special device
associated with them; for the floppy diskette shown above, there is also
a device
brw-rw-rw- 1 root system 15, 0 Apr 16 15:42 /dev/fd0
So the presence of a 'c' in a device does NOT necessarily mean this is a
raw device suitable for use by Oracle (or another application).
Generally, a raw device needs to be created and set aside for Oracle (or
whatever application is going to use it) when the UNIX system is set
up - therefore, this needs to be done with close co-operation between
the DBA and UNIX system administrator.
Once a raw device is in use by Oracle, it must be owned by the oracle
account, and may be identified in this way.

What mean that the sign of the GPS ( the arrow head) is always active although there isn't any application is opened and also after restart the phone

What mean by, the sign of the GPS ( the arrow head) is always active although there isn't any application is opened and also after restart the phone still active

Something is using location services. You can go into Settings, Privacy, Location Services, and see a list of what you have authorized for location services, and see a legend that tells what the display of the arrow head means and you should be able to compare it to the list to find out what app was using it.

CAN'T open any applications after mac os update 10.4.11

CAN'T open any applications after mac os update 10.4.11 help

General advice on updating:
It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
The 10.4.11 Combo Updater for PPC Macs is here: http://support.apple.com/kb/DL170
And for Intel Macs here: http://support.apple.com/kb/DL172
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.4.11 update here: http://support.apple.com/kb/TA24901?viewlocale=en_US
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.10 to 10.4.11. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications and turn off energy saving and screensaver.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
[b]If you are updating Safari (or just have):[/b]
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very [i]first[/i] thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was [i]not[/i] a beta. If Safari 3.1.2 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
Moreover, trying to revert to Safari 3.0.4 (or worse still, version 2) when running 10.4.11 or 10.5 can have repercussions, as Safari 3.1.1 uses a completely different webkit on which other applications like iChat, Mail and Dashboard Widgets etc also rely, and may entail you having to reinstall an earlier operating system.
[b][i]Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on.[/b][/i] Two such add-on that have been frequently mentioned here for causing such problems are Piclens and Pithhelmet. If you have them, trash them.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
/Library/InputManagers
~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).

The Creative Cloud application becomes inoperable continually on both my Windows 7 and 8.1 operating systems. I'm tired of re installing the application after deleting the OOBE file to get updates and syn settings between computers for Photoshop. Is this

The Creative Cloud application becomes inoperable continually on both my Windows 7 and 8.1 operating systems. I'm tired of re installing the application after deleting the OOBE file to get updates and syn settings between computers for Photoshop. Is this an endemic problem with others? I'm using Google Chrome as my browser. Is this an issue with the problem?

Similar problem just happened to me with the Creative Cloud Update 1.7.1.418—slightly different so I thought I'd share. I have multiple Adobe Creative Cloud programs installed on my computer, all working just fine. I updated the Cloud App to the latest version and then it shows me that I have only one program installed! All my previously installed programs (Photoshop and the like) still work but show as "install" instead of "Up to date". Initially I thought I'd have to re-install the Cloud app or recreate the OPM data base but then I noticed that some of the Cloud app preferences (Apps > Settings > App Language) were different to what I had set previously. I use English (International) language, the update had reverted the app back to English (North American). I flicked back to my previous language and bam, all my apps now show as being installed correctly.

Oracle SSO not showing up status after rebooting the 10gapplication server

Hi all,
I installed 10g R2 10.1.2.0.2 application server RHEL AS 4.0 2.6.9-11 kernel.
After the successful installation IM and MR and MT (BI). All the components in the MT and infrastructure was showing up status. After rebooting the machine i executed the following commands
For Infrastructure
1.     To make the metadata repository up and running
Log in as an oracle user
#cd /home/oraASInfra/bin
#export ORACLE_HOME=/home/oraASInfra
#export ORACLE_SID=mamcinfr
#./lsnrctl start
#./sqlplus
Enter userame: sys as sysdba
Sql>startup
Sql>Exit
2.     To start the other components of the infrastructure
Log in as an oracle user
#cd /home/oraASInfra/opmn/bin
#./opmnctl startall
3.     To start the iasconsole
#cd /home/oraASInfra/bin
#./emctl start iasconsole
For Middle tier
1.     To start the middle tier components
Log in as an oracle user
#cd /home/oraASmt/opmn/bin
#./opmnctl startall
2.     To start the iasconsole
#./emctl start iasconsole
In the MT all the components is showing up status
In the Infrastructure except oracle sso OID , HTTP server and OC4J security is showing up status.
There is no any port conflicts between the infrastructure and MT.
Is there any post installation tasks has to be done after the installation?
please help me to sort out the issue.
thanks,
C Saju

1. After RapidWiz with 11.5.10.2 CDs, do we need to
do any post installation step to make the browser
load Oracle Forms. Do we need to create our own
certificate using envshell.cmd and then adjkey. And,
apply that to Jinitiator using adjbuild.sh and
regenerate JAR files using ADADMIN Jar ( I am so far
assuming that these steps are not necessary after for
rapidwiz install of 11.5.10.2 )Your assumption is right. You do not have to do anything
2. Do I need to apply the Oracle App 11i 11.5.10.2
Maintenance Pack after installing using RapidWiz from
the main set of CDs labeled as 11.5.10.2No
3. Should I try by installing manually latest
Jinitiator 1.3.1.21 or 1.3.1.25You do not have to upgrade your jinitiator version unless you want to go with the latest one.
Since (adsign.txt, appltop.cer, and identitydb.obj) do not exist in your system, you just need to initialize the java certificate as follows:
adjkey -initialize
This will create the following files:
- adsign.txt directory $APPL_TOP/admin
- appltop.cer direcotry $APPL_TOP/admin
- identitydb.obj directory $HOME of the user that launch adjkey
Metalink note: 365735.1 should be helpful.
Good luck

ElementsAutoAnalyzer abends within a few minutes after rebooting the PC. How can I fix this?

I decided to start my PC from scratch (new hard drive, reinstall Windows 7 Ultimate 64-bit, then all software). ElementsAutoAnalyzer abends within a few minutes after rebooting the PC. How can I fix this?
Event viewer shows:
Faulting application name: ElementsAutoAnalyzer.exe, version: 12.0.0.0, time stamp: 0x530b7bfc
Faulting module name: ntdll.dll, version: 6.1.7601.18247, time stamp: 0x521eaf24
Exception code: 0xc0000005
Fault offset: 0x0000000000031ccc
Faulting process id: 0xbdc
Faulting application start time: 0x01d072bd95218cd4
Faulting application path: C:\Program Files (x86)\Adobe\Elements 12 Organizer\CAHeadless\ElementsAutoAnalyzer.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: ea495e82-deb1-11e4-9750-001c25e903e8

Erica from Apple support: Your efforts to help on this subject are appreciated. However, during my wait for your supervisor, just when I stepped away from my desk for a moment you must have picked up your phone again. When I heard a noise (other than the hold music) I rushed back to my desk only to hear you hang up. When the phone rang and the ANI said "Apple support" I tried to pick up but you were gone by the time I got the button pressed.
Hopefully you'll see this note and leave a message on how to resolve this issue for me and the others from other similar questions posed on this forum.
Thanks,
George

I can't open any application after updating to 4.3.5

i can't open any application after updating to 4.3.5???!!
can someone help..?
before this i coudn't listen to music with my intern speaker.

- Try a reset. Nothing will be lost:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Try downloading/installing a new app.
- iOS: Troubleshooting applications purchased from the App Store

Problems to start SAP instance after reboot

Hello experts,
we are occuring a problem that we are not able to start our SAP instance after we applied some MS patches and rebooted the server. We also deinstalled these patches buzt this also did not help, so I guess the reason somewhere else.
We are running a SQL server 2000 on a Windows 2003 SP2 (32bit)
SAP kernel is 640 PL 304
The SQL server seems to operate normally, however when we try to start SAP via MMC the process disp+work fails (it's green for a few seconds, but then turn so grey).
In dev_w0 I can find this entry
C Mon Feb 22 12:35:18 2010
C OpenOledbConnection: line 23082. hr: 0x8000ffff [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.
C sloledb.cpp [OpenOledbConnection,line 23082]: Error/Message: (err 17, sev 10), [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23082]: Error/Message: (err 0, sev 10), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
I hope you have an idea to solve the issue soon.
Thanks a lot
Philipp

Hi,
yes I read this SAP note however when I try to install this patch
It fails with message "installation unsuccessful"
Reason ??
Check the following:
1. Status of SQLServer Service(s)?
2. Windows Event Log Entries?
What is the SP level of SQL Server 2000 ?
Also, Perform the Connectivity Test as per[ this link|http://support.microsoft.com/kb/827422/].
Regards,
Bhavik G. Shroff

Hi when i open my application folder, all the application is shown in trash folder. when i click the application it says this app is in trash first move it out. and when i try to open through finder go it says this file doesn't exist. can some1 plz help?

hi when i open my application folder, all the application is shown in trash folder. when i click the application it says this app is in trash first move it out. and when i try to open through finder> go it says this file doesn't exist. can some1 plz help? how can i put all my application through application folder?

Something really odd is going on. In your first screen shot, I noticed that the Applications folder does not have the proper icon displayed in the side bar. Also, in the title bar it lists it as Applications 08-59-29-909.
Not sure where it's picking up that odd name, unless it's because it's still truly within the Trash folder.
Try this. In the Finder > Preferences > General > turn on "Always open folders in a new window". (I have a feeling you have the default setting with this off).
Now, in Finder > Go > move down and open the Applications Folder from there. Now open the folder where you see all your applications that you show in your screen shot, select all, and move them to this true appliactions folder.
This is what you should properly seeing (but with different apps listed):
See how the Applications folder has the icon of the letter A shaped with a pencil, ruler & pen.

The password file is getting corrupted after rebooting the standby database

Hi,
The password file is getting corrupted after rebooting the standby database.
Since the databases are not in sync, I had to copy the pwfile from primary to standby to make 'em sync.
(BUT.... the pwfile is not getting corrupted every time I reboot the standby by)
Could somebody please explain the reason for the pwfile on the standby database getting corrupted while rebooting ?
Env: Oracle 11g on Windows 7
Thanks in advance

Moderator Action:
This thread was originally posted to the Oracle/Sun Servers HARDWARE forum.
This is definitely not an issue related to any hardware components.
... it's now moved to Database General Questions, hopefully for closer topic alignment.

Just bought an ipad2 but cannot find the face time application after activating the ipad2

Just bought an ipad2 but cannot find the face time application after activating the ipad2

FaceTime is not available in the UAE so it is not on your iPad. It is restricted there.

Problems to open a application after reboot the server

Similar Messages

Maybe you are looking for