Problems to print contacts with specific fields under Maverick.

I am unable to print contacts with specific, selected fields like `firm´ or `position´under Mavericks. The selected fields will not show up in the printing preview and not be printed at all. Any ideas?

Thanks, John! It seems you guessed correct, partly at least. I turned some of the problamatic fields off and on again an these are showing up now and I can print them. Great!
However, I can see the field "firma" (German = company in English) in the previewed sample card but not in the pull down menu "Add Field". That means, I am unable to turn it off/on. The intersting thing: The field is visible and selectable even in the printer dialog were you can select the fields you would like to print but it remains unprintable.
Again, many thanks, John!

Similar Messages

Printing envelopes with specific fields from contacts

I want to choose certain fields to print envelopes - from a group I have in contacts. Is this possible?
Thanks

Hi kellyof5,
Thanks for using Apple Support Communities. This article has instructions on printing envelopes from a group in Contacts:
Contacts (Mavericks): Print contact information
http://support.apple.com/kb/PH15095
Cheers,
- Ari

Hi, I have problems in ordering book from iPhoto. It says "problems in getting contact with Apple Online Store" I have changed password on my Apple ID - could that be the problem ??

Hi, I have problems in ordering book from iPhoto. It says "problems in getting contact with Apple Online Store" I have changed password on my Apple ID - could that be the problem ??

Some additional efforts you can try:
Go to the System/Sharing preference pane and make sure Remote Apple Events is checked.
If it is, uncheck it and then recheck and try ordering again.
OT

I have billing problem who to contact with in middle east ?

i have billing problem who to contact with in middle east ?

your carrier
apple do not sell phone subscriptions
and this is not an official apple channel this is a user helping users forum

Printing to an Epson 7900 under Mavericks

Anyone experienced problems printing to an Epson 7900 under Mavericks OS X 10.9 ?
According to Epson I have the latest drivers installed for the 7900, V9.04
I have 2 MACS - a MacBookPro running under Mountain Lion and I've updated my MacBook Air to run 10.9.
No problems printing the same file from the MacBookPro.
On the MacAir, I certainly see the printer; can send a file to it - but it prints and is terribly garbled. I see supply levels on the MacAir too.
But the interaction with the Driver is strange - it keeps reverting back to my HP 2100, Updating the settings in the printing Presets doesn't stick, etc.
the print is an almost total mess - it's the right size and you can see the image and some parts are fine - but the rest of it looks like it's done with drastic motion blur (so that looks like the driver is scrambling something).
If nobody else has seen this, then I will start by deleting the driver; re-installing it all and so forth - but just interested to see if anybody else out there has had trouble with it.
jc

use a computer with an internet connection to download the installation files (to a usb stick, eg) and transfer the stick to your non-connected computer.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5 | 1
Contribute: CS5 | CS4, CS3 | 3,2
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

HP Desktop 1050 printer interfacing with a MacBook Pro Maverick 10.9.2 OS

Will an HP Desktop 1050 printer work with a MacBook Pro Maverick 10.9.2 OS?

Yes. Have you plugged it into the Mac via USB? If so, the Mac will take care of the rest and you will be ready to print in a couple of minutes.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Problems in transaction F871,with the field docuemnt type:

Hello,m
I´m trying to create a Payment Request with transaction F871,and I have a problem with the field docuemnt type that is mandatory, when I try to open the match code there is no values, and a message is displayed as follows: " No document type assigned to request category 01 "

Hello Olga,
Thanks for your words in the other thread. In any case your english is perfect, it is not my mother language also so apologize my errors too
Please check if you have done this customizing:
SPRO -> Public Sector Management -> Funds Management Government -> Funds Management-Specific Postings -> Requests -> Request Types -> Assign Request Category to FI Document Type
I hope it helps.
Greetings from Brazil
Vanessa.

Use REST API to query contacts with a field updated since certain time?

Hello,
Using the REST API and trying to figure out how I can query for contacts that have had a field updated since a specified time. I've tried using the "lastUpdatedAt" arg, but to me it seems like I'm getting back contacts that maybe haven't had any data change, but were probably sent an email or something of that sort (so the updated at value was changed)
Is there a way to query for contacts that have had fields change (Like subscriptions, address, title, etc) but exclude those contacts that only have their updated values changes because they were sent an email?
Thanks!

Hi Chris,
lastUpdatedAt or "Date Modified" fields don't change when the contact is sent an email, but rather, when ANY field is modified on the contact record. You can certainly query for and export contacts that had their data touched in some way since a specified time, but it won't be on a per-field basis. There is effectively no field level change history or tracking. You can work around this with extra logic. First, you can get a snapshot of what the values were in the specific fields you want to track across your entire database.
The next time you run an export using Date Modified, it will contain more records than you might care about, but you can filter offline for the ones you do care about by comparing their before and after values for the specific 'tracked' fields.
Regards,
Bojan

Problems sending an email with a field attached.

Hi everyone,
Im having problems with sending an e-mail (with a field attached) to an external e-mail address.
Im using the followings functions:
'SO_DOCUMENT_INSERT'
'SO_OBJECT_UPLOAD'
'SO_ATTACHMENT_INSERT'
'SO_OBJECT_SEND'
Everything goes well (the functions are executed well), but the message stacks and it isnt be sent.
I can see it with the transaction SBWP, it is in the folder Exit/Documents with status: Waiting communication service .
Then I can send it from there clicking at the button send. And then it is sent.
Have anyone any clue about what Ive missed to do.
I really appreciate your help; I need to solve this problem as soon as possible.
Kind regards.

Hai
report zemail no standard page heading line-size 220.
data: message_content like soli occurs 10 with header line,
 receiver_list like soos1 occurs 5 with header line,
 w_object_hd_change like sood1.
start-of-selection.
Receivers
receiver_list-recextnam = '[email protected]'.
receiver_list-recesc = 'E'.
receiver_list-sndart = 'INT'
receiver_list-sndpri = '1'.
append receiver_list.
General data
w_object_hd_change-objla = sy-langu.
w_object_hd_change-objnam = 'Object name'.
w_object_hd_change-objsns = 'P'.
w_object_hd_change-file_ext = 'HTM'. "<--this is important
Mail subject
w_object_hd_change-objdes = 'HTML from SAP/ABAP'.
Mail body
append 'Message content' to message_content.
append 'How''s this for sending HTML E-mail from SAP?' to
message_content.
append 'New paragraph' to message_content.
append 'Apostrophe&#8217s' to message_content.
Call function to send email - SAPConnect needs to be configured
call function 'SO_OBJECT_SEND'
exporting
 object_hd_change = w_object_hd_change
 object_type = 'RAW'
 owner = sy-uname
tables
 objcont = message_content
 receivers = receiver_list.
2)
ABAP CODE
Email ITAB structure
DATA: BEGIN OF EMAIL_ITAB OCCURS 10.
 INCLUDE STRUCTURE SOLI.
DATA: END OF EMAIL_ITAB.
DATA: T_EMAIL LIKE SOOS1-RECEXTNAM. "EMail distribution list
CONSTANTS: C_EMAIL_DISTRIBUTION LIKE SOOS1-RECEXTNAM VALUE
 [email protected],[email protected].
Initialization
REFRESH EMAIL_ITAB.
Populate data
EMAIL_ITAB-LINE = Email body text 1.
APPEND EMAIL_ITAB.
EMAIL_ITAB-LINE = Email body text 2.
APPEND EMAIL_ITAB.
T_EMAIL = C_EMAIL_DISTRIBUTION.
--- EMAIL FUNCTION ---------------------------------------------------
REQUIRMENTS:
1) The user running the program needs a valid email address in their
 address portion of tx SU01 under external comms -> SMTP -> internet
 address.
2) A job called SAP_EMAIL is running with the following parameters:
 Program: RSCONN01 Variant: INT User: XXX
 This program moves mail from the outbox to the mail server using
 RFC destination: SAP_INTERNET_GATEWAY_SERVER
INTERFACE:
1) APPLICATION: Anything
2) EMAILTITLE: EMail subject
3) RECEXTNAM: EMail distribution lists separated by commas
4) TEXTTAB: Internal table for lines of the email message
EXCEPTIONS:
Send OK = 0 otherwise there was a problem with the send.
 CALL FUNCTION 'Z_SEND_EMAIL_ITAB'
 EXPORTING
 APPLICATION = 'EMAIL'
 EMAILTITLE = 'Email Subject'
 RECEXTNAM = T_EMAIL
 TABLES
 TEXTTAB = EMAIL_ITAB
 EXCEPTIONS
 OTHERS = 1.
Function Z_SEND_EMAIL_ITAB
""Local interface:
*" IMPORTING
*" VALUE(APPLICATION) LIKE SOOD1-OBJNAM
*" VALUE(EMAILTITLE) LIKE SOOD1-OBJDES
*" VALUE(RECEXTNAM) LIKE SOOS1-RECEXTNAM
*" TABLES
*" TEXTTAB STRUCTURE SOLI
*- local data declaration
DATA: OHD LIKE SOOD1,
 OID LIKE SOODK,
 TO_ALL LIKE SONV-FLAG,
 OKEY LIKE SWOTOBJID-OBJKEY.
DATA: BEGIN OF RECEIVERS OCCURS 0.
 INCLUDE STRUCTURE SOOS1.
DATA: END OF RECEIVERS.
*- fill odh
CLEAR OHD.
OHD-OBJLA = SY-LANGU.
OHD-OBJNAM = APPLICATION.
OHD-OBJDES = EMAILTITLE.
OHD-OBJPRI = 3.
OHD-OBJSNS = 'F'.
OHD-OWNNAM = SY-UNAME.
*- send Email
CONDENSE RECEXTNAM NO-GAPS.
CHECK RECEXTNAM <> SPACE AND RECEXTNAM CS '@'.
*- for every individual recipient send an Email
(see OSS message 0120050409/0000362105/1999)
WHILE RECEXTNAM CS ','.
 PERFORM INIT_REC TABLES RECEIVERS.
 READ TABLE RECEIVERS INDEX 1.
 RECEIVERS-RECEXTNAM = RECEXTNAM+0(SY-FDPOS).
 ADD 1 TO SY-FDPOS.
 SHIFT RECEXTNAM LEFT BY SY-FDPOS PLACES.
 MODIFY RECEIVERS INDEX 1.
 PERFORM SO_OBJECT_SEND_REC
 TABLES TEXTTAB RECEIVERS
 USING OHD.
ENDWHILE.
*- check last recipient in recipient list
IF RECEXTNAM <> SPACE.
 PERFORM INIT_REC TABLES RECEIVERS.
 READ TABLE RECEIVERS INDEX 1.
 RECEIVERS-RECEXTNAM = RECEXTNAM.
 MODIFY RECEIVERS INDEX 1.
 PERFORM SO_OBJECT_SEND_REC
 TABLES TEXTTAB RECEIVERS
 USING OHD.
ENDIF.
ENDFUNCTION.
 FORM SO_OBJECT_SEND_REC *
FORM SO_OBJECT_SEND_REC
TABLES OBJCONT STRUCTURE SOLI
 RECEIVERS STRUCTURE SOOS1
USING OBJECT_HD STRUCTURE SOOD1.
DATA: OID LIKE SOODK,
 TO_ALL LIKE SONV-FLAG,
 OKEY LIKE SWOTOBJID-OBJKEY.
CALL FUNCTION 'SO_OBJECT_SEND'
 EXPORTING
 EXTERN_ADDRESS = 'X'
 OBJECT_HD_CHANGE = OBJECT_HD
 OBJECT_TYPE = 'RAW'
 OUTBOX_FLAG = 'X'
 SENDER = SY-UNAME
 IMPORTING
 OBJECT_ID_NEW = OID
 SENT_TO_ALL = TO_ALL
 OFFICE_OBJECT_KEY = OKEY
 TABLES
 OBJCONT = OBJCONT
 RECEIVERS = RECEIVERS
 EXCEPTIONS
 ACTIVE_USER_NOT_EXIST = 1
 COMMUNICATION_FAILURE = 2
 COMPONENT_NOT_AVAILABLE = 3
 FOLDER_NOT_EXIST = 4
 FOLDER_NO_AUTHORIZATION = 5
 FORWARDER_NOT_EXIST = 6
 NOTE_NOT_EXIST = 7
 OBJECT_NOT_EXIST = 8
 OBJECT_NOT_SENT = 9
 OBJECT_NO_AUTHORIZATION = 10
 OBJECT_TYPE_NOT_EXIST = 11
 OPERATION_NO_AUTHORIZATION = 12
 OWNER_NOT_EXIST = 13
 PARAMETER_ERROR = 14
 SUBSTITUTE_NOT_ACTIVE = 15
 SUBSTITUTE_NOT_DEFINED = 16
 SYSTEM_FAILURE = 17
 TOO_MUCH_RECEIVERS = 18
 USER_NOT_EXIST = 19
 X_ERROR = 20
 OTHERS = 21.
IF SY-SUBRC <> 0.
 RAISE OTHERS.
ENDIF.
ENDFORM.
 FORM INIT_REC *
FORM INIT_REC TABLES RECEIVERS STRUCTURE SOOS1.
CLEAR RECEIVERS.
REFRESH RECEIVERS.
MOVE SY-DATUM TO RECEIVERS-RCDAT .
MOVE SY-UZEIT TO RECEIVERS-RCTIM.
MOVE '1' TO RECEIVERS-SNDPRI.
MOVE 'X' TO RECEIVERS-SNDEX.
MOVE 'U-' TO RECEIVERS-RECNAM.
MOVE 'U' TO RECEIVERS-RECESC.
MOVE 'INT' TO RECEIVERS-SNDART.
MOVE '5' TO RECEIVERS-SORTCLASS.
APPEND RECEIVERS.
ENDFORM.
3)
DATA: OBJPACK LIKE SOPCKLSTI1 OCCURS 2 WITH HEADER LINE.
DATA: OBJHEAD LIKE SOLISTI1 OCCURS 1 WITH HEADER LINE.
DATA: OBJBIN LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: OBJTXT LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: RECLIST LIKE SOMLRECI1 OCCURS 5 WITH HEADER LINE.
DATA: DOC_CHNG LIKE SODOCCHGI1.
DATA: TAB_LINES LIKE SY-TABIX.
DATA L_NUM(3).
Creation of the document to be sent
File Name
DOC_CHNG-OBJ_NAME = 'SENDFILE'.
Mail Subject
DOC_CHNG-OBJ_DESCR = 'Delivered Mail'.
Mail Contents
OBJTXT = 'Object text'.
APPEND OBJTXT.
DESCRIBE TABLE OBJTXT LINES TAB_LINES.
READ TABLE OBJTXT INDEX TAB_LINES.
DOC_CHNG-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
Creation of the entry for the compressed document
CLEAR OBJPACK-TRANSF_BIN.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'RAW'.
APPEND OBJPACK.
Creation of the document attachment
LOOP AT ITAB_DATA.
 CONCATENATE ITAB_DATA-PRODUCTOR
 ITAB_DATA-VBELN
 ITAB_DATA-POSNR
 ITAB_DATA-MATNR INTO OBJBIN.
 APPEND OBJBIN.
ENDLOOP.
DESCRIBE TABLE OBJBIN LINES TAB_LINES.
OBJHEAD = 'ORDERS'.
APPEND OBJHEAD.
Creation of the entry for the compressed attachment
OBJPACK-TRANSF_BIN = 'X'.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 1.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'TXT'.
OBJPACK-OBJ_NAME = 'WEBSITE'.
OBJPACK-OBJ_DESCR = 'ORDERS.TXT'.
OBJPACK-DOC_SIZE = TAB_LINES * 255.
APPEND OBJPACK.
Completing the recipient list
target recipent
clear RECLIST.
RECLIST-RECEIVER = '[email protected]'.
RECLIST-EXPRESS = 'X'.
RECLIST-REC_TYPE = 'U'.
APPEND RECLIST.
copy recipents
clear RECLIST.
RECLIST-RECEIVER = '[email protected]'.
RECLIST-EXPRESS = 'X'.
RECLIST-REC_TYPE = 'U'.
RECLIST-COPY = 'X'.
APPEND RECLIST.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
 EXPORTING
 DOCUMENT_DATA = DOC_CHNG
 TABLES
 PACKING_LIST = OBJPACK
 OBJECT_HEADER = OBJHEAD
 CONTENTS_BIN = OBJBIN
 CONTENTS_TXT = OBJTXT
 RECEIVERS = RECLIST
 EXCEPTIONS
 TOO_MANY_RECEIVERS = 1
 DOCUMENT_NOT_SENT = 2
 OPERATION_NO_AUTHORIZATION = 4
 OTHERS = 99.
ENDFORM. " SEND_MAIL
Thanks & Regards
Sreeni

Pro grammatically create three sub-folders with specific name under each of root folders in site collection level??

Hi,
i have a document library Named "Digital" in a site collection. In that document library i have bunch of customer folders with different customer name. My requirement is i need to create three sub-folders (like Images, Processed, Status) each of
customer folders. so how can i automate to create sub-folders with specific name. can i use object model or power shell to achieve this one.
Thanks in advanced!

Hi Murugesa,
Thanks for your help. i was trying to create folder inside document library using your code. but unfortunately i cant debug code and cannot create folder inside customers folder. Following is the code, basically i am creating a SharePoint project and adding
an item as class file and deploying to share point site and then trying to debugging code, but break-point showing as yellow circle. i checked solution has been deployed to the server but still not creating any folder. It will be very helpful if you can describe
all the steps. should i create console application?
Appreciated !!
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using Microsoft.SharePoint;
namespace Add_Sub_Folders
class Create_Folders
public void Sub_Folders()
var foldersList = new List<string>();
SPSecurity.RunWithElevatedPrivileges(delegate()
try
using (var site = new SPSite(SPContext.Current.Site.Url.ToString()))
using (var web = site.OpenWeb())
web.AllowUnsafeUpdates = true;
foreach (SPFolder folder in web.GetFolder("http://nyc01d1sptmp01:8080/Shared%20Documents/").SubFolders)
if (folder.Url.ToString() != "Shared Documents/Forms" && folder.Url.ToString() != "Shared Documents")
foldersList.Add(folder.Url);
SPFolder subFolder = web.GetFolder(folder.Url);
subFolder.SubFolders.Add("Draft");
subFolder.SubFolders.Add("Status");
subFolder.SubFolders.Add("Final");
folder.Update();
web.AllowUnsafeUpdates = false;
catch (Exception ex)
ex.Message.ToString();

Bad display with datepicker field under apex 4 using French lang

Hi,
I am using a datepicker field under apex 4 and if I change the language to French, the calendar is not displayed correctly.
Any idee why?
Many thanks for your help
jko
Edited by: user617942 on 03-Aug-2010 00:10

The Calendar doesn't stick into the window...
It seems that the window is not resized to handle french days.
Jko
Is it more clear?
Edited by: user617942 on 2 août 2010 08:33

Print PDF with Filename & Tags from Mavericks OS

Hi Forum,
is it possible to print a document on Apple OS Mavericks that automatically rpints in with File name and the Tags that are applied to it? That or PDF a document with the Filename and Tags stamped on it, i can then print that to paper.

What application are you printing from? I don't think there's any way to do it from any application, perhaps if you used AppleScript. I'd suggest posting this on the Apple forums. www.apple.com.

Sender FCC , problem with Repeating Field under a Sub-structure

Hi,
I have an Input File as
D,TH_ ,10/31/2008,ABC,pieces
PF, 10/31/2008,11/2/2008,11/3/2008,11/4/2008
P,mat,CS,100,120,130,125,150,170,120
P,mat,CS,100,120,100,110,140,120,110
I need to Implement an FCC to convert this to
a Structure like this
Recorset
    Header           1....1
        Unique Id
        date Time
        CustomerCode
        Code
        Unit
    Dates         1
     date          1....n
    Products       1....n
      product      1
      unit         1
      quantity     1.....n
This this is a Variable recordset type ( i.e each ROW has a Different Structure) the following keys D,PF,P are defined, for the header, dates, and Product Information.
The Following FCC parameters are applied
Document Name : MT_FILE_INPUt
Document NameSpace = http://xyz.com
Recordset Name = "Recordset"
Recordset structure = Header,1,Dates,1,Products,*
keyname              = Key
Keytype               = String
Header.FieldSeprator = ,
Header.FieldName = Unique Id,date Time,CustomerCode,Code,unit
Header.keyValue = 'H'
Dates.FieldSeprator = ,
Dates.Fieldname   = 'date'
Date.keyValue    = 'PF'
Products.FieldSeprator = ,
Product.FieldName = product,unit,quantity
Product.KeyValue = 'P'
Now the Problem is as Follows:
1) I have a Repeating Field Quantity under the Product and Date under the Dates Sub-structure, This is not getting Repeated at all.
Is there a Way to achieve the same
2) Another Point is That, i do not want to take the key Value in the XML structure after converion, is there a way to avoid it
Please let me know if any blogs are available
Any help would be appreciated.
Thanks,
Best Regards
Abhishek

can u try.. i haven't tired this.
quantity is occuring multiple times, but if that is fixed no# of occurance,, you can can try with this?
P,mat,CS,100,120,130,125,150,170,120
Product.FieldName = product,unit,quantity,quantity,quantity,quantity,quantity,quantity
let me try ..
As long as the quanitfy defined under Product.FieldName are more than the input msg quantity values (100,120..), you will be safe...
Edited by: Anand on Oct 31, 2008 3:54 PM

Contacts with multiple numbers under the same labe...

i
I have many contacts which have numbers saved under the same label.
For example a contact like this:
First name: A
Mobile: 11
Mobile: 22
Telephone: 33
Telephone: 44
When I open Ovi Suite / Contacts / Contacts in E51 and open the abovementioned contact "A" it shows:
A
Mobile: 11
Telephone: 44
Mobile (other): 22
As you see it deleted one of "Telephone" labeled numbers. It also happened when I used PC suite.
It is really annoying as if I save/sync the contact using Ovi, it causes loss of contacts data.
BTW there is no problem using Backup/Restore function of Ovi/PC suite, nor "Copy to memory card" function of the phone itself.
Ovi suit version : 2.1.1.1
Nokia E51 v300.34.56
Windows 7
PS:
tested another one with 6 different numbers under the same "Mobile" label
the result in Ovi is:
AA
Mobile: 11
Mobile (main): 33
Mobile (other): 22
the other 3 numbers were lost

atammin wrote:
Ah, you have an interesting setup here.
Could you answer a few clarifying questions regarding this.
> When I open Ovi Suite / Contacts / Contacts in E51 and open the abovementioned contact "A" it shows
* Did you perform a sync? Or did you just connect the phone and look at the contact card in the phone view?
I had performed sync before and realized that some contact data are missing in my phone, so I started investigating to see exactly which contacts are affected by creating some dummy contacts and editing them by clicking on my phones icon below the window of "Contacts" tab in ovi.
* Did you check the contact in your phone (using the phone's UI)? Were all the details there - or are you saying that Ovi Suite lost some of the details?
In fact both. Ovi fails to extract and show some numbers and thus fails to write them back to the phone correctly. The lost details are purged from the phone too.
Just to confirm I've understood the scenario correctly
1) you have contact card in phone with two mobile numbers (same label) and two telephone numbers (same label)
yep
2) you sync with Ovi suite
Either Sync or directly open and save contact.
3) the mobile numbers have been re-labled to Mobile and Mobile (other) but the numbers are preserved
They are re-labled only when viewed in Ovi, but written back to the phone with the same "Mobile" lable as created on the phone.
4) one of the Telephone numbers is completely lost from Ovi Suite and phone.
And this scenario happened with this setup:
- Ovi suite version : 2.1.1.1
- Nokia E51 v300.34.56
- Windows 7
I just want to be clear on the setup and scenario so we can investigate.
thanks, Aki
I also done another test
This is the contact created in phone:
BEGIN:VCARD
VERSION:2.1
N:;A
TEL;CELL:11
TEL;CELL:22
TEL;CELL:33
TEL;CELL:44
TEL;CELL:55
TEL;CELL:66
TEL;VOICE:11
TEL;VOICE:22
TEL;VOICE:33
TEL;VOICE;HOME:11
TEL;VOICE;HOME:22
TEL;VOICE;HOME:33
TEL;VOICE;WORK:11
TEL;VOICE;WORK:22
TEL;VOICE;WORK:33
X-CLASSrivate
END:VCARD
And this is what happens to contact when I just click edit and then save in Ovi.
BEGIN:VCARD
VERSION:2.1
N:;A
TEL;CELL;PREF:11
TEL;CELL:33
TEL;VOICE:33
TEL;VOICE;HOME:33
TEL;VOICE;WORK:33
END:VCARD
I also attached what ovi shows about this contact as an image.
Attachments:
displayed in ovi.PNG ‏9 KB

Current update has intermittent problem of printing gibberish with HP Officejet Pro 8500. No problems before most recent update.

Even in Print Preview will show as gibberish--and print as gibberish. If repeatedly open document to print, suddenly it Previews & Prints correctly.

Have you moved the paper guides to properly align the envelopes? I do not see how envelopes can be loaded in any position but the center with the paper guides set snugly. See page 42 (46) of the manual here. Also, if you have the optional second paper tray note that envelopes are not supported in it, you need to use the top tray.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Problems to print contacts with specific fields under Maverick.

Similar Messages

Maybe you are looking for