Problems to print PDF documents form Acrobat Pro 10.1.12

Since I've installed Yosemite on my iMac, PDF files are printed very badly. I get the pictures, but not the text, or sometimes a part of the text.
I have transferred the files on a Macbook equipped with Maverick, and then, no more problem. What's there to do to erase the problems ?
To Apple teams : Yosemite, the best way to waste time ?..... I use a computer not to play, but to work !

Same complaint here. I get blank pages on some of the pages of the document. The document prints in Preview, but Acrobat 10.1.12 refuses to print some of the pages. This is just a simple scanned document saved as a PDF, nothing fancy. Come on, Apple.

Similar Messages

Problem to print pdf-based forms using Epson printer

Hello,
I need print pdf-based forms using an EPSON FX 2190 printer.
In The sap note 685571 I read that can print PDF-based forms on all printers installed in the SAP system as long as the relevant XDC file exists.
I do not found XDC file to EPSON device type, a Epson fx 2190 do not support postscript.
Can I use this printer to pdf-based forms?
I need that spool request (pdf) have a output immediately on EPSON printer.
thanks in advanced for your cooperation to solve it.
Osmany

I don't think Epson has developed an XDC for ESC/P language. That would be very difficult/long to develop an XDC from scratch. Best solution is to install a new printer. Otherwise you may either use a Printer Description Language converter (PS to ESC/P, or other ones), it probably exists, or call acrord32 in print mode on a Windows frontend or server.

Problem to print pdf-based forms using matricial Epson printer

I need print pdf-based forms using an EPSON FX 2190 printer.
In The sap note 685571 I read that can print PDF-based forms on all printers installed in the SAP system as long as the relevant XDC file exists.
I do not found XDC file to EPSON device type, a Epson fx 2190 do not support postscript.
Can I use this printer to pdf-based forms?
I need that spool request (pdf) have a output immediately on EPSON printer.
thanks in advanced for your cooperation to solve it.
Osmany

I am afraid you cannot make your scenario work if there is no XDC provided. Maybe you can create one, but I don´t know how difficult that can be or how to do that. Maybe you can get more help under ABAP > Form printing where there are guys experienced with this printing details. Regards, Otto

How to change PDF document dimensions - Acrobat Pro 9

Hi,
I'm trying to figure out how to change the dimensions of my PDF in Acrobat Pro.
The original artwork was created in Illustrator and the final document is primarily for screen use (not print) so was created using pixels (600x665px to be precise). However when the artwork is created into a PDF, when viewed (and printed) in Acrobat, it is rather large and I want to make this smaller.
If anyone can advise on this it'd be much appreciated!
thanks
HS

You might play with the Touchup Object tool off the Advanced Editing toolbar.
Use the tool to select the image. Any of the four corners can be "grabbed" and a mouse drag will let you change the space occupied, on the PDF page, by the image. Not a "fine control" but, sometimes, all that's needed.
Or, in Preferences > Touchup category - the associated configuration pane permits selection of an installed image editor.
Now, using the Touchup Object tool's context menu, you can use the "Edit Image..." selection.
Edit the image and return it to the PDF.
Be well...

Problem editing 2 PDF files simultaneously - Acrobat Pro 9

We have an unusual problem here: Our authors are using Adobe Acrobat Pro 9.0 on their Windows XP systems.
When they open 1 PDF file (Window #1), the text creating/editing function works great.
When they open another PDF file (Window #2) and create/edit text, this works as well.
But when they try to go back to the 1st PDF file (Window #1) and edit the text, the text editing toolbar is grayed out and cannot be selected.
However, when they do select the text in Window #1, the text editing toolbar in Window #2 is "activated" (even though this window is not the active/selected window).
When you try to change the text attributes in Window #1 using the toolbar in Window #2, it deselects/deactivates Window #1 and activates Window #2, thereby rendering the text edit toolbar functional for only Window #2.
This does not get fixed unless you close both files and Acrobat and reopen only 1 file at a time.
I have tried to reinstall Acrobat 9.0 but this did not correct the problem.
Any ideas?

It does not matter which ones I am using. As long as any two are opened together it does this.
Sincerely,
Steve Elmore
Network / Server Administrator
Tweddle Group
North America-Europe-Asia
Information Development, Management & Delivery
24700 Maplehurst
Clinton Township, MI 48036 USA
Desk: +1 586-840-1348
[email protected]
www.tweddle.com<http://www.tweddle.com/>
Information Development, Management & Delivery
TS16949, ISO14001 and SFI, PEFC and SGP Certified

Problem in printing pdf document with java code

Hi All
I want to print a pdf document with java code i have used PDFRenderer.jar to compile my code.
Code:
File f = new File("C:/Documents and Settings/123/Desktop/1241422767.pdf");
FileInputStream fis = new FileInputStream(f);
FileChannel fc = fis.getChannel();
ByteBuffer bb = fc.map(FileChannel.MapMode.READ_ONLY, 0, fc.size());
PDFFile pdfFile = new PDFFile(bb); // Create PDF Print Page
PDFPrintPage pages = new PDFPrintPage(pdfFile);
// Create Print Job
PrinterJob pjob = PrinterJob.getPrinterJob();
PageFormat pf = PrinterJob.getPrinterJob().defaultPage();
pjob.setJobName(f.getName());
Book book = new Book();
book.append(pages, pf, pdfFile.getNumPages());
pjob.setPageable(book);
// System.out.println(pjob.getPrintService());
// Send print job to default printer
pjob.print();
but when i am running my program i am getting error
Exception in thread "main" java.awt.print.PrinterException: Invalid name of PrintService.
Please anybody, knows the solution for this error?
Thanks In Advance
Indira

It seems that either there is no default printer setup or you have too many printers or no printer setup at all. Try running the following code. It should print the list of available print services.
import java.awt.print.*;
import javax.print.*;
public class PrintServiceNames{
     public static void main(String args[]) throws Exception {
          PrintService[] printServices = PrinterJob.lookupPrintServices();
          int i;
          for (i = 0; i < printServices.length; i++) {
               System.out.println("P: " + printServices);
}From the list pick one of the print service names and set it explicitly like "printerJob.setPrintService(printServices);" and then try running the program.

PDFs from Adobe Acrobat Pro not printing with Yosemite

I am unable to print PDFs from Adobe Acrobat Pro 11.0.09 since installing Yosemite 10.10. I have been check-marking "print as image," which worked previous to Yosemite.
I am now printing via the Apple Preview, but despite selecting 1 copy, it is printing 10 of everything.

Hi,
IO must say, it seems to work now without me having to tick the Print as Image box.
This is my version:
Architecture: i386
Build: 11.0.9.29
AGM: 4.28.138
CoolType: 5.11.136
JP2K: 2.0.0.32097

Hp laserjet pro 200 color MFP M276n not printing PDF documents

Hello
I am having problems printing PDF documents from our hp laserjet pro 200 color MFP M276n.
I get a blank sheet of paper and a message on the printer saying 49 service error - turn off then on
I can print word/excel documents.
Many thanks
Karen

Hi,
As I understand you get a 49 error while printing PDF document from hp laserjet pro 200 color MFP M276n.
Kindly follow these steps to resolve the issue.
1. Open the PDF document you want to print.
2. Click File > print > Click on the Advanced option > select the print as image option.
though I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution

I cannot print a PDF from Adobe Acrobat Pro or Adobe Reader with Mavericks!

I cannot print a PDF from Adobe Acrobat Pro or Adobe Reader. I tried on both MacBook Pros we have here, both now with Mavericks. Error message says "Opening printer connection failed. Unable to open printer connection . . . " This is after it says sending data, printing, shows the percentages etc., but then at the end I get the error message above. I can print a PDF (same one) from Preview, but not from Acrobat! What's going on? Never had this issue before Mavericks . . . Please help.

This is an open forum, not Adobe support... you need Adobe support to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

HP Laserjet pro p1102 kills spooler when printing PDF documents

I have a HP laserjet pro p1102 running on Win7 63x PC.
When I print PDF documents nothing happens on the printer side.
Instead the spooler is killed.
When checking the spool file I can see that the documents have been spooled to the printer.
New driver install done, aswell as firmware upgrade.
Acrobar pro 11.0.07.
Please assist.

Hi @UFS-HYRAX,
I see by your post that when printing a PDF the Print Spooler Crashes. I can help you.
Do you have the same results when printing something else, other then a PDF?
Clear the Spool folder and restart the Print Spooler.
How to Clear Current Print Queue In Windows Vista & Windows 7.
Run the Adobe Updates, the latest version is 11.0.09.
Print the PDF file as an "image". From the Adobe print screen, select the button "Advanced", on that screen you see the box for "print as image". Click on that check it. This should resolve the issue.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Tried to open a pdf document with Acrobat XI Pro Trial and sign in popped up , I keyed in my username and password but it doesnt respond its like grey with the four dots rotating forever. Any solution Please ?????

Tried to open a pdf document with Acrobat XI Pro Trial and sign in popped up , I keyed in my username and password but it doesnt respond its like grey with the four dots rotating forever. Any solution Please ?????

Hi higi97,
How are you connected to the internet? Are you behind a particularly secure corporate firewall? Are you on Mac or Windows? Do you have any anti-malware software running on your machine that may be preventing applications other than your browser from connecting to the internet?
You may try to follow the steps below:
1.Close the Creative Cloud application.
2.Navigate to the OOBE folder.
Windows: [System drive]:\Users\[user name]\AppData\Local\Adobe\OOBE
Mac OS: /Users/[user name]/Library/Application Support/Adobe/OOBE folder
3.Delete the opm.db file.
4.Launch Creative Cloud.
Let us know if that helps,
Regards,
Rave

I am trying to convert a PDF to a Word document using Acrobat Pro 9 but am unable to find "Content to edit" under tools. Do I need a newer version?

I am trying to convert a PDF to a Word document using Acrobat Pro 9 but am unable to find "Content to edit" under tools. Do I need a newer version?

Acrobat 9 Pro (not Standard) can export ("convert") PDF to Word, RTF, or other text formats.
Click-path: File - Export
Take your pick.
With install of Acrobat 9 the Help PDF is installed also.
From the this PDF's Bookmarks expand Chapter 5's bookmark and select "Convert PDFs to Word".
Be well...

I am now unable to print pdf documents. The message on screen says I have not selected any pages to print, even though the bullet point saying 'All' pages has been clicked. I have recently upgraded to adobe reader XI, could that be the problem? I also ca

I am now unable to print pdf documents. The message on screen says I have not selected any pages to print, even though the bullet point saying 'All' pages has been clicked. I have recently upgraded to adobe reader XI, could that be the problem? I also cannot sign in to Adobe Export pdf now either. It says 'error occured while signing in'!

Open Adobe Reader | Edit | Preferences | Documents: change View Documents in PDF/A Mode to Never.
Regarding the ExportPDF problem, please start a new topic in the ExportPDF forum.

Problem printing pdf documents created by ps2pdf

When I try to print pdf documents that have been created from ps documents by ps2pdf, the output is corrupted. Many letters are missing but included graphics are printed just fine. This happens with my HP printer and with cups-pdf, when I print the pdf document to a new pdf document. There are no errors in the logs, so I don't know what is goning wrong. On a windows PC, the pdf documents are printed correct too. Other pdf documents, created by pdflatex are printed correct.
If I don't use ps2pdf and print the ps document directly, the output is correct. I have tried different pdf-viewers without any difference. About half a year ago, everything was working fine, so could it be related to : "As of version cups 1.5.3-3 ArchLinux makes use of the new full pdf-based printing workflow."?

Flo,
In my limited experience with the iOS iWork apps, they weren't designed for those who are picky about the layout. They are highly automatic and if you don't like the result, it's not easy to override. If the format when printed leaves unpleasant margins, I think your best approach is to reshape the tables in such a way that they will better fit the target media. If you are having large top margin, make the tables narrower, then when they scale to fit the paper, then may fill it better.
Jerry

Print PDF document with printer's name and date/time of print

Hi,
I'm pretty new to this...
I have a PDF document and when I print it, I want the printer's name and the date/time of print to be showed on the printer's output.
I have several printers (some local and some on network) and don't necessarly use the default one. I would like the name of the printer used, to be printed on the document.
With var h = this.getField("Printer"); h.value = app.printerNames; I'm able to get the list of all printers available but I just need the one used.
For the date/time, using var f = this.getField("Today"); f.value = util.printd("mmm/d/yyyy", new Date()); gives me the date/time of when the document is open, not when the document is printed. (or maybe I'm missing something?)
I guess the date/time issue is not the major one as there is usually not much difference between the time you open the document and the time you print it.
I'm more interested in the printer's name.
I use Acrobat Pro 9 to edit my PDF document.
Can anyone help me please?
Thanks!

This project was left aside for a while... but it's now finished!
Thank you for the answers. It was helpful.
Here is a step-by-step of what I did (using Adobe Acrobat 9.5.1):
Open PDF document in Acrobat
Select Forms -> Add or Edit Fields
Add two text fields: one called "Today" for the date and one called "Printer" for the printer name
Close the form editing
Select Advanced -> Document Processing -> Set Document Actions...
Then select Document Will Print and Edit
Paste the following code:
var f = this.getField("Today"); f.value = util.printd("dd mmm yyyy - HH:MM", new Date());
var pp = this.getPrintParams();
this.getField("Printer").value = pp.printerName;
Save your PDF
Enjoy!
The date and printer name field will be automatically updated when you print the document!

Problems to print PDF documents form Acrobat Pro 10.1.12

Similar Messages

Maybe you are looking for