Problems to reach R3 System

Hello all,
After logon to Import SAP Objects and click the RFC link
i got the following error.
Problems to reach R3 System...
Could you guys guide me what i need to change to get rid of this error msg.
Thanks in advance.
SV

Hello,
Try with the user id and password in capitals. -
2. Make sure there is a network connectivity between XI and your R3 system.
3. Make sure you have the authorizations to import idoc's.
4. Make sure that in your SWCV, you have selected the option, Import of RFC and Idoc's allowed.
I tried above all...
after 10 or 15th attempt its works...
SV

Similar Messages

Reaching backend systems through portal is a problem via dispatcher--

Hi Experts,
I am having problem when I try to reach backend systems through the portal from internet. I have configured WebDispacher according to information taken from help.sap.com, but unfortunately the result is not satisfactory. Reaching Portal EP7.0 from internet is successful, but when I changed to iviews that are referring to backend systems then browser comes to a blank page with error. If any of you having an idea on the subject that will much be appreciated.
Regards,
Ali Taner

Hi Hari,
I am sorry that it has been a bit sharp response from my side, but I am confused with what you mentioned. Is the Alias that you mentioned reside on R3 side or Portal side that I should look for, and secondly the Alias should address to local URL or External URL? In my understanding if Alias referring to local URL address than it gets error when somebody tries to reach from internet because local address is not known on the internet. I really appreciate your kind help
Kind Regards,
Ali Taner

Problem with reached maximum number of connections to database

Dear Experts,
Our Production system was not responding properly last week.
The below was the reply from the Basis team.
"It seems that we have again problem with reached maximum number of connections to database. We have extended this number to 100 this year and now it seems that it’s not enough again. It seems that something is running on Production, which takes over too many connections."
They have increased the number to 200 as a work around.
Do we have any means to find out, which component or application is causing the issue.
Please advise me if any better way is available to correct the issue.
Please see the below trace.
From default trace:
======
Caused by: com.sap.engine.services.dbpool.exceptions.BaseSQLException: ResourceException occurred in method ConnectionFactoryImpl.getConnection(): javax.resource.R
esourceException: (Failed in component: dbpool, BC-JAS-TRH) Cannot create connection. Possible reasons: 1)Maximum allowed connections to DB or EIS is reached. You
can apply CSN Note 719778 in order to check and resolve connection leaks. 2) Configuration to DB/EIS is wrong or DB/EIS is temporary unreachable. 3) Connections ar
e not enough for current load.
        at com.sap.engine.services.dbpool.cci.ConnectionFactoryImpl.getConnection(ConnectionFactoryImpl.java:60)
        at com.sap.security.core.persistence.datasource.imp.J2EEConnectionPool.getConnection(J2EEConnectionPool.java:205)
        ... 61 more
Caused by: javax.resource.ResourceException: (Failed in component: dbpool, BC-JAS-TRH) Cannot create connection. Possible reasons: 1)Maximum allowed connections to
DB or EIS is reached. You can apply CSN Note 719778 in order to check and resolve connection leaks. 2) Configuration to DB/EIS is wrong or DB/EIS is temporary unr
eachable. 3) Connections are not enough for current load.
        at com.sap.engine.services.connector.jca.ConnectionHashSet.match(ConnectionHashSet.java:230)
        at com.sap.engine.services.connector.jca.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:343)
        at com.sap.engine.services.connector.jca.ShareableConnectionManager.allocateConnection(ShareableConnectionManager.java:54)
        at com.sap.engine.services.dbpool.cci.ConnectionFactoryImpl.getConnection(ConnectionFactoryImpl.java:52)
        ... 62 more
Caused by: com.sap.engine.services.dbpool.exceptions.BaseResourceException: SQLException is thrown by the pooled connection: com.sap.sql.log.OpenSQLException: No c
onnection to data source SAPEPPDB available. All 100 pooled connections are in use and 70 connection requests are currently waiting. The connection pool size might
need to be adjusted.
        at com.sap.engine.services.dbpool.spi.ManagedConnectionFactoryImpl.createManagedConnection(ManagedConnectionFactoryImpl.java:192)
        at com.sap.engine.services.connector.jca.ConnectionHashSet.match(ConnectionHashSet.java:221)
        ... 65 more
Caused by: com.sap.sql.log.OpenSQLException: No connection to data source SAPEPPDB available. All 100 pooled connections are in use and 70 connection requests are
currently waiting. The connection pool size might need to be adjusted.
======
Thanks and Kind Regards,
Jelbin

Stop all instances(including DB) and start again, Hope it should work.
It may happened that jar has not been synchronized with the database and may be version mismatch with the java.
719778 - Data Source fails to return connection
1650472 - Transactions are interrupted due to database connection periodically failing to establish
1138877 - How to Deploy External Drivers JDBC/JMS Adapters
Change the connection pool so that it can connect to DB as per the note 719778
Regards
Vijay Kalluri

Warning: An error occurred during tax calculation. Please correct the problem or contact your system administrator.

Hi All
We are creating POs from interface program "Import Standard Purchase Order Program". Only for few of the POs, we are encountering the error 'Warning: An error occurred during tax calculation
. Please correct the problem or contact your system administrator.'
This error is happening for few PO's, other POs with same vendor, ship to and bill to location created successfully by the program
Any inputs on how to resolve this error is greatly appreciated.
Regards,
Brajesh

Hi Hussein,
Thank for the prompt response.
We have already applied the patch related to doc 1272684.1.
Below are the environment detail.
Database: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
Application : 12.1.3
Diagnostic tool output :-
INTERFACE_
TRANSACTION_ID
INTERFACE_TYPE
COLUMN_NAME
PROCESSING_DATE
TABLE_NAME
ERROR_MESSAGE_NAME
ERROR_MESSAGE
100148
PO_DOCS_OPEN_INTERFACE
09-Aug-2013
PO_HEADERS_INTERFACE
PO_PDOI_TAX_CALCULATION_ERR
Warning: An error occurred during tax calculation. Please correct the problem or contact your system administrator.
Log file :-
+---------------------------------------------------------------------------+
Purchasing: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
POXPOPDOI module: Import Standard Purchase Orders
+---------------------------------------------------------------------------+
Current system time is 09-AUG-2013 21:09:04
+---------------------------------------------------------------------------+
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
STANDARD
N
INCOMPLETE
12805
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
To get the log messages for PDOI, please use the following id to query against FND_LOG_MESSAGES table:
AUDSID = 12076063
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
Executing request completion options...
Output file size:
69
+------------- 1) PRINT   -------------+
Printing output file.
               Request ID : 55116524
         Number of copies : 0
                  Printer : noprint
+--------------------------------------+
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed successfully
Current system time is 09-AUG-2013 22:27:42
+---------------------------------------------------------------------------+
Brajesh

'A problem with the cooling system' error message on Satellite A660

Hi all,
Hope I can get some help here. I've had about 5 HP laptops after all of them had problems and faults. I got sick of them and therefore got a refund and bought a high spec A660-1FH.
The A660 has been a great laptop for two days until yesterday when I started getting a warning message saying 'A problem with the cooling system has been detected. Please turn off the computer immediately, and return it for service'.
The cpu fan works fine as you can here it spinning and the temperature of the i5-460m processor is around 40 degrees for both cores - which seems normal to me. I've noted that it happens only when running on battery and if you switch from eco utility to power saver mode. Its fine when running on the 'balanced' power setting. The fan is louder before when this message appears.
As its under 28 days my retailer swapped it for a brand new one straight away. Got the new one home, and the same message appears again. Has anyone else experienced this. As two laptops have had this, I'm wondering if this is normal for the A660 series laptop or if there is really a hardware issue?!
I have tried to upgrade eco utility and the bios of the laptop but both are the latest versions. Can anyone help or share if they experience a similar issue with their laptop?
Thanks

In front of me I have Satellite A660-13Q (PSAW3E) and I have it about 6 weeks now. It runs almost 10 hours daily and until now I didnt notice such message or anything else that can be suspect for hardware functionality.
I really dont know why this happen on your notebook and dont think there is anything you can do about it.
I would exchange it again. What you can also try is to contact nearest Toshiba service. Make a call, explain the situation and ask if they can help you with this.

A problem with the cooling system has been detected

I bought a new computer not to long ago, I've had it for almost a month now. It runs fine, and I've had no problems until not too long ago. I was playing a game, and I got a random error message: "A problem with the cooling system has been detected. Please turn off the computer immdiately, and return it for service." I don't understand how or why this came up, and I don't have any money to return it for any type of repairs. After I got this message, I left my computer off for about an hour. All seems well so far. Any suggestions?

What laptop do you have?
- Peter

Problem with the EFI system partition's file system.

I installed latest yosemite 10.10.2 update - did a verify disk on “WDC WD1001FALS-403AA0 Media” (internal HD on my iMac 21.5-inch, Mid 2011) and got
Problems were found with the partition map which might prevent booting
Error: The partition map needs to be repaired because there’s a problem with the EFI system partition’s file system.
However a verify disk on the volume partition gets a clean bill of health!
I haven't done a 'repair disk' yet. Thought I'd check if anybody else has same message first.
Cheers

I had issues where my MacPro 8-core would not boot after the 10.7.4 upgrade, but my MacBook Air 13" 2011 upgrade worked just fine.
I had to restore my MacPro HD from my TimeMachine back up. Apparently, the Softraid raid drivers that I use on my MacPro are not compatible yet with 10.7.4. See here for more info:
http://macperformanceguide.com/blog/2012/20120511_1-MacOSX-SoftRAID.html
I contacted Softraid and they are already aware of the issues and are working with Apple for a fix.
Cheers.
Bud

MacBookPro SSD Error- ALERT: The partition map needs to be repaired because there's a problem with the EFI system partition's file system.

MacBook Pro OS x Mavericks. I have Sandisk 256GB SSD and I am getting a below error message.
ALERT: The partition map needs to be repaired because there's a problem with the EFI system partition's file system.
Does anyone know how to resolve this error and fix it ? unfortunately I don't have a Time Machine backup. Thanks!

Have you tried to run the verify/repair permissions and verify/repair disk through the recovery disk? If that didn't work then I would reinstall the OS after backing up. If that still doesn't work I would take it in.

Problem with transforming coordinate systems

Hiho,
i've got a problem with transforming coordinate systems.
When I'm trying to transform a sdo_geometry object to another coordinate sytem and then back to the old system, the coordinates are not the same.
Here's an example:
StartSystem SRID is 8220 (Longitude / Latitude (DHDN))
TargetSystem SRID is 8307 (Longitude / Latitude (WGS84))
Original object:
Polygon: {ExteriorRing: LineString: { (0.0, -90.0) (1.5, 0.0) (0.0, 90.0) (4.5, 0.0) (0.0, -90.0)} }
Transformed object:
Polygon: {ExteriorRing: LineString: { (0.0, -5156.620156177403) (85.94366926962347, 0.0) (0.0, 5156.620156177403) (257.8310078088704, 0.0) (0.0, -5156.620156177403)} }
Transformed back to old system:
Polygon: {ExteriorRing: LineString: { (0.0, -5156.620156177403) (4924.209525017614, 0.0) (0.0, 5156.620156177403) (14772.628575052844, 0.0) (0.0, -5156.620156177403)} }
Any ideas what to do?
Thanks for the help in advance.
Dirk

Hi Dirk
Since the transform you are trying to do is just a datum conversion of lat./long. coordinates, even the first transform yields obvious rubbish. What you have provided here does not illustrate how you submitted your polygon to CS_TRANSFORM.
Provide the syntax of your construction of the corresponding SDO_GEOMETRY object and your SQL select statement that gave these results.
Bruce

Problems to reach some websites

Hi,
I'm asking for your help about a problem I have been struggling with for about a month.
Background information:
- 3 client computers (2 on Windows Seven, 1 on XP),
- 1 Windows 2012 server (AD service active)
- ASA 5505 router for the WAN connection (Orange as provider)
- PPPoe Authentication used with DSL provider box set in modem mode
Problem:
All clients except ONE (on Windows seven) have problems to reach some websites. Some work well, but for others, it keeps waiting for the connection until a timeout error message.
The clients affected are also unable to update the virus database.
Using an anonymizer service as anype.com, I can finally reach the websites that timed out...
The affected clients use the same DHCP as the one that works.
Sending a ping from the affected clients to the unusable websites gives the good ip adress.
Using an external laptop which works well on another network on this network gives the same symptoms.
I can see no configuration differences between clients and even reinstalled one of them from scratch without more success.
Did someone experienced this kind of problem? I'm running out of ideas!!!
Thanks in davance for your help

PPPoE will add 8 bytes and IPsec VPN will add as much as 80 bytes to the original packet. So the packet will be larger than MTU down the path between client and server. but those packets maybe set df-bit, so ICMP type 3 code 4 (packet need fragment but df-bit set)will send back to the originator, but sometimes it can not reach the originator due to FW block or ACL or packet drop. so the connection will be timeout.
Workaround: configure 'ip tcp adjust-mss 1360' on WAN router (here FW), make sure all the WEB access can work, then you can increase 1360 to bigger number until you reach a balance.
Some WEB server did not honor MSS advertised by client side during TCP 3-way handshaking, it will result in packet from server side will need to be fragmented down the path to client, if DF-bit set, it also cause session timeout.

Regarding problem while assigning logical system

Hi Friends,
I had a problem while assigning logical system to the client where in both of my systems are having same client number which belong to 2 different systems.
while assigning the sender and receiver logical system to the same client i am facing problem stating that an entry has already been made for the same key.
could any one plz give me a clear idea...while assigning logical systems (cross clients) for 2 different systems having same client number.
Regards,
Madhu

Hello Madhusree,
I'm running with same problem. I've created two logical systems and assigned them to two different clients. But here pops up the issue while generating partner profiles, throwing error "No active plan version exists". Later when I researched about the issue, I came to know that T77S0 table doesn't have any entries regarding plan versions. Basically, I created two clients by doing "client copy" from source client (800 & 100). And I could see plan version entries in the T77S0 of client 800. So, I thought of assigning just defined logical system to the source client 800 itself. But it throws error saying "entry already exists"; as client (800) is already assigned with other logical system.
By coming across your post, gives me leap of hope that two logical systems can be assigned to same client. Could you please share me those troubleshooting steps concerning this issue. Points will be awarded.
Regards, Anil.

Problem with importing Business System

Hello All,
I scussfully exported and imported components and products and scussfully exported business system from pi7.0 server. I want to import this business system on another PI7.0 Server. I am facing problem while importing business system is Business group is not assigned to business system. How to create Business group. Plz suggest me how to import business system.
Thanks
San

SAP help defines it - http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
Also for more info,
http://www.sap-hefte.de/download/dateien/964/074_lesesprobe.pdf - look into page 10 for a reference.

Problems with the File System Repository & User Mapping!

Hi All
I am having a problem with a file system repository, and setting up user mapping for that repository.
I have done the following:
Created a File System Repository
Created a Network Path
Created a System (Including the alias)
Now when I go into User Administration and select my user the is no user mapped systems to select.
All this system is doing is connecering to a folder on our File System.
Any help would be great as this is really frustrating!
Thanks
Phil

I am using EP7 Stack 11 and unfortunately the only options I have are:
user
admin
admin,user
It is currently set to admin, user and does not seem to work!
Phil
Message was edited by:
Phil Wade

HT4718 I can't reach recovery system when I reboot- I press 'command' and 'r' quickly, but nothing happens, the progress bar begins to load... Any thoughts?

I can't reach recovery system when I reboot- I press 'command' and 'r' quickly, but nothing happens, the progress bar begins to load... Any thoughts? It gets about halfway through loading and then stops, no mouse, no nothing. I think I'll be able to move past it if I can reach the Recovery options.
Thanks!

If you are really sure that it's impossible to click in Recovery mode, then something is wrong with the machine.
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed.

Problem in BW development system.

Hi Experts,
I have problem with BW development system, some of the loads are failed freuently in the BW development and test clients, but they never fail in the production client.
and the error message I am able to see in the Header tab is
"IDocs were found in the ALE inbox for Source System that are not updated.
Processing is overdue."
So I am resolving the issue by " updating manually in OLTP system"
So can any one help me out what will be the problem and how it will be prevented permanently.
regards
sekhar

Hi,
In the system, the Basis team will setup a number of processors for certain specific jobs (you can view them via SM51), and they're ENQUEUE (1), DIALOG (about 6-7), BACKGROUND (3?), SPOOL (2). Each of them serve specific usage. Now when a BI* job comes into the system, it tries to run the job through the Background processors, and also locking up certain tables using the Enqueue. However, if at the point of running the job, there's already someone locking up the table or taking up all the background processors, this BI* job will have to wait until the lock is released or that the background processors are freed up. Hence this could lead to time out on the BI* jobs. It is very common for DEV to be setup with minimal number of processors for each, since the usage is pretty much restricted to the Development team alone.
As for the number of dialog processors, I recalled that there's an OSS note advising on the number of processors to be setup in the environment as a basic setup.
Of course it is also wise to check on the BD87 and the dumps - ST22 and SM21 transactions to find out more information on the reasons of termination.
Thus, frequent termination of jobs is usually related to hardware constraint, or genuinely some configuration setting in the IDOC setup.
Hope this helps.
Cheers,
Gimmo

Problems to reach R3 System

Similar Messages

Maybe you are looking for