Problems to Register a WorkFlow Location in the Warehouse Builder!

Hello people,
I'm trying to register a WorkFlow location in the Warehouse Builder, but it's appearing an ERROR saying that don't exist a WorkFlow Repository although the repository tables are already installed...
I'm not understanding... i'll really appreciate any comment.. tks!

Hello Panopano,
Sorry for the late...
I had been absent in the last days, but now I'm trying to solve this problem again.
Owb version is 10.1 Release 1 and WorkFlow Server is 2.6.3!
I hope we can finalize this problem... thanks a lot.!

Similar Messages

  • I'm working on AE tutorial 5.5 chapter 9. It instructs me to use the 'fill" button, problem is it's not located on the Tools panel. where can I find the "fill" button?

    I'm working on AE version 5.5 tutorial; the instructions in chapter 9 tell me to use the "fill" button located in the tools panel. problem is, it's not in the Tools panel. Any idea where to find the "fill" button?

    why a duck wrote:
    AE CS 5. the version of software is 5.5
    When you hit Help>About, what version number does it say?
    Could you show an image of the tutorial or link to it so we can see more clearly what it's asking you to do?

  • Problem to register my email account in the Z30 HUB / with my french carrier "FREE"

    I am confuse
    I have one usual email account with "Webmail Free"
    Later on, I add 2 more email accounts on "Webmail Free".
    I have used them for a long time by now and I don't even remember the login of those last two account.
    Now when I want to register my email account in the HUB, it always says, my login is wrong ...:!
    Why ?
    Perhaps it is one of the 2 others.
    Can anyone help me?
    Solved!
    Go to Solution.

    Maybe I don't understand your question but without the login information you can't add in the accounts. To add in your accounts go to Settings >Accounts and enter the credentials there. If you don't know your password(s) you will have to reset them with those providers.
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • Problems updating to ios5, not eligible for the requested build?

    I am trying to update to ios5 and itunes gives me an error saying that the device is not eligible to the requested build.

    use this: http://ipadhelp.com/ipad-help/ipad-iphone-isnt-eligible-for-the-requested-build/
    worked for me

  • Redefinition of locations when move Warehouse Builder to new server

    Hi
    We have 4 DW/OWB environment, but only one design repository (development)
    We have defined 4 configurations with 4 "sets" of locations.
    The locatiosn are defined as host:port:servicename, because of bug, when defined as tns.
    Now we are moving our DW to a new server and must redefine all locations.
    After the movement we have to
    1) unregister all locations
    2) change all locations
    3) register all locations
    4) redeploy all mappings, process flows and procedures
    This is a huge task, even if it can be automated via a OMBPlus script.
    Does any one know about a script (SQL or OMBPlus), that can be used for redefinition of the locations in the design repository and the 4 runtime repositories, so we don't have to perform the above tasks ?
    Best Regards
    Klaus

    Hi
    Re: NTP... you can have multiple NTP servers assigned, and only the primary NTP server is used for license MAC generation. As such, I would:
    1) set the primary NTP server to be the real NTP address you want to use. This will not be accessible when you build the server with the old servers' IP.
    2) set the secondary NTP server to an accessible NTP server. I do this by setting up NTP on the server you serve the SFTP backup file from. I use Meinberg NTP if this is a Windows box, it's free.
    That way you can build the server (primary NTP not accessible, but secondary is so it's fine). Then after the restore, change IP address and it will start using the primary NTP server.
    I presume deployment type refers to product and role .e.g. a CUCM Publisher, not a CUC server or CUCMBE publisher.
    Aaron HarrisonPrincipal Engineer at Logicalis UK
    Please rate helpful posts...

  • Problem in import of MetaData file in Oracle Warehouse Builder 9.2

    My Problem is Related to Oracle WareHouse Builder.My system's configuration is following :-
    Machine : P4
    Operating System :Windows XP
    ORacle : Version 9.2
    Oracle WareHouse Builder 9.2
    Ram :1GB
    SGA Size :Approximately 650M
    I have 2 MetaData files which I have to import into OWB.
    First file's size is 9M.It got imported properly in 4 minutes without any error.
    2nd File's Size is 30M.when
    I start importing this MEtaData file.It goes upto 35% in Progress Bar.But after that it does not show any improvement.
    I have left the machine running with this option upto 24 hours.
    But nothing happened .It still shows only 35%.
    I have checked log file/Trace file/Alert log files ,but there is no error in these files.
    If any body have any solution about it,Please reply ASAP.I am stucked in this problem from last 7-8 days.
    Waiting for reply
    Thanks & Regards
    Harvinder Singh

    Thanks for your reply Igor.
    As posted the OWB 10.1.0 software is running against a 9.2.0.8.0. database, so OWB still uses DBMS_JOB instead of DBMS_SCHEDULER in this database. In addition I already tested scheduling a simple job to run an OS command as suggested in note 365539.1 , and job scheduling is working fine.
    There are no invalid objects in this database.
    Yasmin

  • A bug in the warehouse builder regarding mappings of dimensions

    Hi there
    I do not know if this is the right place to submit a possible bug. Anyways - here goes.
    Warehouse builder client: 10.1.0.2.0
    Warehouse builder repository: 10.1.0.1.0
    I'm creating a dimension, having one level attributes property as a varchar2(30). Thus it has a length of 30. Now, later on I decide this was an error. I update the property to a number, deploys, and reconcile the dimension inbound in the mapping. From now on, it will give an error, since it remembers the length. And a number has a size, not a length. If I remove the dimension from the mapping, and inserts it again, the error still occurs.
    By the way, I am able to reproduce this.
    Anyone who has experienced this, and can blame the stupid user (me) or classify this as a bug?
    Yours
    Kim Andersen

    Hi Igor
    The "error" is actually a "warning":
    Warning: VLD-1004: Column length of ASD_ASDASD is longer than the target column length.
    where ASD_ASDASD is the dimension property, which I altered. It is annoying, though, to have warnings on the list, that aren't needed. And I also spent considerable time thinking that was the error in a mapping, whereas it was a stupid mistake made by me somewhere else :)
    If it's a registered bug, do I get to win some branded Oracle candy?! :)
    Yours
    Kim

  • Where can I get a specific LIST of the warehouse builder "core features" ?

    I see references to a specific list in various places for 10gR2 and 11g but have yet to stumble upon said list. Can someone give me a URL? So far the main thing I see as an added option is Data Pump.
    Thanks

    Well, this looks about as specific as Oracle is going to make it. They say essentially what you said, if you don't see it in the defined extra cost option assume it's a core capability. But the reason I was thinking Data Pump is extra cost is things like this:
    [Oracle Warehouse Builder Enterprise ETL Option|http://download.oracle.com/docs/cd/B28359_01/owb.111/b31278/concept_overview.htm#CEGEIDFG]
    Enables higher developer productivity in (larger) projects. Also
    allows for reuse of transformation logic and for certain *fast
    extraction methods in large volume data movements.*

  • Hi - an interesting problem - I accidentally deleted 'current location' from the bookmarks on the map app on my iPhone 3 GS - as it's a default app I cannot delete/reinstall it. Help!

    I tried ways of using a pin to locate my current location but obviously that didnt seem to help.

    Same problem, any assistance would be appreciated.
    thanks

  • Problem i'm facing while trying to open the form builder

    Hi all,
    I'm facing a small problem while i'm trying to open the form builder via Portal - content management - form builder, i.e., intially a dialogue box statting that :
    Applet(s) in this HTML page requires a version of java different from the one the browser is currently using. In order to run the applet(s) in this HTML page, a new browser session is required, press 'Yes' to start a new browser session.
    is getting displayed.
    when i click either of the buttons, only a statement as : java plug in dected JRE collission  get's displayed.
    If any one knows what this problem is all about, please share the same.
    thanks in advance...

    Hi Vipin,
                   It should be the problem with the JDK version you have currently got installed. Un Install the current version and install latest JDK and set your browser to use this JRE.
      Also goto System Admin>System Config>Content Admin-->Form based publishing and ensure that the check box for "Allow HTML Output" is checked.
    Regards
    Ramesh.

  • Is workflow included in 10.2.0.4 warehouse builder?

    Hi there
    Is oracle workflow included within 10.2.0.4?
    From otherhelpful replies, I have learnt we need to install oracle 10.2.0.1 then the 10.2.04 patch to bring us up to 10.2.0.4.
    We need to run process flows so I understand we need oracle workflow.
    Is this included within the warehouse builder installs (both client and server or is it just a the server-side we would need to worry about?) or do we need separate installs for these?
    Does anyone know which versions of worklfow we would need for 10.2.0.4 in the event that separate installs are needed?
    Many Thanks

    Hi Patrick
    Thanks for the info.
    Just finished installing 10.2.0.1 on Windows client and the 10.2.0.4 patch on top of that.
    Can I assume I can ignore the bit in the readme below where it talks about the upgrade utility since we have yet to create our repository.
    Many Thanks
    5. Navigate to the appropriate execution directory under the Warehouse Builder home directory and run the upgrade utility. The specific file you should execute depends on the release of the Oracle Database you are running.
    For Windows, the .bat files are located under the win32 directory. If your Oracle Database is either 9iR2 or10gR1 run the following:
    owb home/owb/bin/win32/DTupg102to10204_10gR1.bat
    Or, if your Oracle Database is 10gR2 run the following:
    owb home/owb/bin/win32/DTupg102to10204_10gR2.bat
    For UNIX, the .sh files are located under the unix directory. If your Oracle Database is either 9iR2 or 10gR1, run the following:
    owb home/owb/bin/unix/DTupg102to10204_10gR1.sh
    Or, if your Oracle Database is 10gR2 run the following:
    owb home/owb/bin/unix/DTupg102to10204_10gR2.sh
    6. Enter the database connection information, the Warehouse Builder repository owner credentials, and the SYS user credentials.
    The upgrade utility proceeds to upgrade the Warehouse Builder objects associated with the selected repository owner.
    The upgrade utility logs any errors in the file owb home/owb/reposasst/upg/LOG.TXT. Note that you can ignore any creation errors reported due to objects already existing.
    DROP TABLE dataflow_dependency_t
    ERROR at line 1:
    ORA-00942: table or view does not exist
    CREATE TABLE alldataflow_dependency_t (
    ERROR at line 1:
    ORA-00955: name is already used by an existing object

  • TS1646 hello  I have problem with regist my visa and I cannot buy from store the message came in the end of form is says the phone number must be a 7-digit number and I have writed but not accepted iam from saudi arabia my mobile is 966504850992 pls answe

    hello 
    I have problem with regist my visa and I cannot buy from store
    the message came in the end of form is says
    the phone number must be a 7-digit number
    and I have writed but not accepted
    iam from saudi arabia
    my mobile is 966504850992
    pls answer
    thanks
    dfr aldossary

    Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum.  Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is.  Apple is not here.  It's users, like you. 
    If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off.

  • I have problem with Itunes losing where podcasts and some purchased music is located. Don't know how Itunes losing the locations of the files and I can't find the files on my hard drive. What can I do to stop Itunes losing location and restore my files?

    I have problem with Itunes losing where podcasts and some purchased music is located. Don't know how Itunes losing the locations of the files and I can't find the files on my hard drive. What can I do to stop Itunes losing location and restore my files?

    Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

  • My daughters have Iphones and both are registered to my email. The problem with that is that one get the others messages. I have to make one account for each their phones. How do I do that?

    My daughters got Iphones a couple of years. I do not have an Apple-phone. I registered both phones on my email. The problem is that one of them get the others messages. I therefore need to make two different accounts for their apple-products. How do I do that?

    On each of the phones you're gonna use a new Apple ID for iCloud: turn off Contacts, Calendars, etc. for iCloud. You'll be prompted to keep the data or delete it from the phone, then turn off iMessage, FaceTime & delete the iCloud account...Settings>iCloud...scroll down...delete account. Then, setup iCloud using the new Apple ID, turn on iMessage & Facetime.
    This will have no affect on the ID you share for iTunes content, & you can continue to do so.

  • I have problems with seeing my bookmarks, file, view, edit...buttons. I tried other shortcuts. I noticed that all of my bookmarks are located in the Internet Explorer browsers, how can I restore setting back to Mozilla Firefox?

    I have problems with seeing my bookmarks, file, view, edit...buttons. I tried other shortcuts. I noticed that all of my bookmarks are located in the Internet Explorer browsers, how can I restore setting back to Mozilla Firefox?

    Is the menu bar missing (the one containing File, View, Edit etc)? If it is, the following link shows how to restore it - https://support.mozilla.com/kb/Menu+bar+is+missing

Maybe you are looking for

  • Problem opening excel

    Hi, When I try to open excel after export of report from BW I get a request to enter userID and password to access the server. How can I remove this message. thanks

  • ITunes 10.6 freezes when launched

    Good Morning, I just recently updated iTunes to 10.6 from the Apple Software Updater. When iTunes is launched it prompts me for apple ID then immediately freezes up. If I reboot the computer, it will allow me enough time to enter my apple ID and pass

  • Tuning OBIEE query with DB index, but it's getting slower

    Hello guys I just have a quick question about tuning the performance of sql query using bitmap indexes.. Currently, there are 2 tables, date and fact. Fact table has about 1 billion row and date dim has about 1 million. These 2 tables are joined by 2

  • MS Publisher to PDF

    I've just converted 48 pages created in MS Publisher into PDF to send to a Printers - it's for a Rugby Club Match Programme. The MS Publisher pages are all created in A5. They have ben converted using the Press Quality setting. However, when I look a

  • Never release the temp space

    It seems my oracle database never release temp space. The usage of temp space kept at 99.8% ,but there was no alarm in alert.log. It is not acceptable to shutdown the machine (7*24). It is said that oracle do not use temp space if the memory for sort