Problems to show IVI driver, properts loader when using operator interface

I am using the Operator Interface (programmed in CVI, with asynchronous timer) in folder OP1 in attached zip file. This operator interface puts not the error message of IVI driver, properts loader etc... on the screen (messages like in attached picture error.jpg in attached zip file). Because of stability problems I am using this operator interface but I need these error message.
A Other Operator interface is OP2 in attached zip file. This operator interface puts the error message of IVI driver, properts loader ... on the screen (messages like in attached picture error.jpg in attached zip file).
Now I want to have this functionality with OP1 becaus of stability reasons I have to use OP1.
How can I implement this in OP1? I tried and searched a lot of time but I have not found a method to implement this.
can anyone help me?
thank you
regards Samuel
Attachments:
OP.zip ‏3405 KB

Hi Sam,
if you open the userinterface which comes with Teststand - the simple one - you should be able to find the difference. You can find it here:
C:\Programme\National Instruments\TestStand 4.1\UserInterfaces\Simple\CVI
I hope this helps.
Greetings, RMathews

Similar Messages

TestStand Error only when using Operator Interface

My testStand sequence runs correctly when I run it from the seqEditor, but when I run it from our Operator Interface (modified version of the simpleOI example), I get the following error,
"Error Message: Parameter 'Input Files': System Level Exception. [Error Code: -17502]
Input Files is a parameter of the LabView vi being called, and is an array of strings. The VI executes correctly even when called fromthe OI, but when it returns to TestStand (when called from the OI) the error occurs.
Thanks for any info and help on this. Also any info on why the simpleOI would cause an error would be appreciated too.

Hi Ray,
Here are some answers to your questions.
This VI that error's, is it part of the simpleOI or part of the Sequence File being run by the simpleOI?
---- The VI is part of a sequence file that is called by the OI.
If it is in a Sequence File, does this run in the default OI?
---- No, it's part of a new set of test sequences for our equipment.
What does the simpleIO do with the data contained in Input Files?
---- The data is just passed to another VI to load our input vectors.
What version's of TestStand and LabVIEW are you running.
---- I believe it's LV 8.5.1 and TestStand 4.0
What sort of modification have you done to the simpleOI example?
---- I think we only added our new sequences, a Operator info popup, and a few more buttons (Pass/Fail light, Change Op Info). And we removed some unused code to make it more simple.
Thanks again for your help.
Billy

App Store won't load when using our wifi

App Store won't load when using wifi

So I'm having this problem with my Ipod 5th gen. I tried absolutely everything but the router suggestions. Mainly because this problem isn't just at home, it's everywhere. I can connect to every free wifi or pass-worded wifi (with the correct password) just fine. But I can't access the internet or apps using the internet at all. Full signal like everyone else. Just no results. Took every tip in this forum and nothing has worked. Even tried deleting the apps that weren't working and re-installing just to make sure it wasn't just a crappy connections with the internet. NOTHING! Someone please help? I'm starting to think it might just be the antenna or the fact that it's about 2 years old and kind of abused. It's been working up until I recovered it after 2 1/2 months of being last in the mix of pants that were packed away. Didn't get washed or anything just had the battery die while it was sitting there. Found it yesterday and starting today I can't access Safari, Youtube, the App Store, or anything else that requires an internet connection. What should I do? Should I take it in to the Apple Store and get it checked out? Or is there something I can do by myself?

What shows on screen at startup when using find my mac if owner locks it?

what shows on screen at startup when using find my mac if owner locks it?

A gray screen where they will have to enter a six digit passcode to unlock the Mac. If the Mac were being used and the remote lock sent, the computer would re-boot to this screen.

No performance gain when using local interfaces

Hello,
I'm doing some tests to compare performances between remote ejb interfaces and local ejb interfaces.
I have two stateless session beans EJB1 and EJB2, EJB1 calls a method on EJB2, this method receives one object as the only parameter and returns it immediately. The parameter is a big object (~700ko). My test consists simply of making 1000 calls from EJB1 to EJB2, one time with remote interfaces, one time with local interface. For both tests, the EJBs run in the same container, same VM.
The results show absolutely no differences between the remote and the local interface !
As I found these results a bit surprising, I changed the serialization method of my parameter object this way:
private void writeObject(java.io.ObjectOutputStream out) throws IOException {
System.out.println("writeObject(MyBigObject)");
out.defaultWriteObject();
just to check if my object is serialized when using remote interface. And the response is no.
So question is: is there an "undocumented optimization" of the stub/skel generated by weblogic which make local calls when calling a remote method inside the same VM ?
Some precisions:
- I'am using weblogic 8.1sp2
- When calling remotely my EJB2 from an external batch (running in a separate VM), I see the message "writeObject(MyBigObject)" so the serialization is done in this case.

<Fr?d?ric Chopard> wrote in message news:[email protected]..
So question is: is there an "undocumented optimization" of the stub/skel generated by weblogic which make local calls when callinga remote method inside the same VM ?
>
Some precisions:
- I'am using weblogic 8.1sp2
- When calling remotely my EJB2 from an external batch (running in a separate VM), I see the message "writeObject(MyBigObject)" sothe serialization is done in this case.
WebLogic 5.x, 6.x and 7.x do call by reference for co-located EJBs by default. 8.1 has this behavior turned off by default. You may
experience call-by-reference optimization in 8.1 only if it has been turned on explicitly in the deployment descriptor.
Hope this helps.
Regards,
Slava Imeshev

Why wont Youtube videos load when using Firefox 3.6.3?

I've been having issues with youtube when using firefox, the video doesnt load or show up for that matter its just a black screen where the video should be and on the bottom left hand corner of Mozzilla it says "done" I've tried everything, I updated java and flash but nothing seems to work. What can I do? I know I can use other web browsers but I really want to fix this
== URL of affected sites ==
www.youtube.com

There are a few reasons why youtube might be broken:
* An extension may be causing the problem: try the steps at [[Troubleshooting extensions and themes]]
* ''Bad item stored in the Browser Cache'': Follow the steps at [[How to clear the cache]].
* Firewall software is blocking some resources on the page: see [[Firewalls]]
If none of this works, let me know if Flash video from other sites work. Here are a few you can try:
*[http://www.dailymotion.com/video/x9hvlb_3d-toy-story-3-2010-teaser-trailer_shortfilms]
*[http://www.hulu.com]
*[http://www.cuatro.com/el-hormiguero/videos]

Not everything loads when using Safari.

I'm using my 3-week-old MacBook, and just in the last week or so, things have stopped loading when I use Safari.
It's mostly images, but lately more videos & songs won't load, either.
I'm a little irritated with it because I only use the notebook for surfing the web & for music with my iPhone & iPod, so it's a little off-putting.
I'm new to this and maybe am missing something I shouldn't have...
Any help is appreciated. Thanks

Hi Merc_g and welcome to the forums!
These are the downloads and the settings you need in order to view/hear pretty much everything that the net can throw at you: The setup described below has proved repeatedly successful on both PPC and Intel macs, but nothing in life carries a guarantee!
It is known to work in the great majority of cases with Safari 3.0.4, QT 7.3 or 7.4 and OS 10.4.11. (If you are running Leopard, ensure that all plug-ins have been updated for OS 10.5.2, but please see my footnote).
Assuming you already run Tiger versions OS 10.4.9 or above (this has not yet been verified with Leopard) and have Quicktime 7.2 or above, and are using Safari 2 or 3, download and install (or re-install even if you already had them) the latest versions, suitable for your flavor of Mac, of:
RealPlayer 10 for Mac from http://forms.real.com/real/player/blackjack.html?platform2=Mac%20OS%20X&product= RealPlayer%2010&proc=g3&lang=&show_list=0&src=macjack
The new RealPlayer Plus (v.11) is still in beta and therefore free, but works well on Tiger. It includes a download function, and you can get that here:
http://uk.real.com/player/mac/
Flip4Mac WMV Player from http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx (Windows Media Player for the Mac is no longer supported, even by Microsoft)
Perian from http://perian.org/
You should read this support page http://perian.org/#support in case you need to delete older codecs.
Adobe FlashPlayer should first be uninstalled using the appropriate uninstaller available here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14157&sliceId=2 and then the latest version obtained from here: http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash and installed.
(You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS, but please see my footnote if you are running Leopard.)
In earlier versions than QT 7.1.3 in Quicktime Preferences, under advanced, UNcheck Enable Flash, and under Mime settings/Miscellananeous only check Quicktime HTML (QHTM).
You should also ensure, if you are running Tiger 10.4.11 or Leopard, that you have downloaded and installed the correct version for your Mac of Security Update 2007-009.1.1, which also deals with the Quicktime/Flash issues you may have experienced, such as the '?'. What happened was that both Quicktime as well as Adobe FlashPlayer tried to play the Flash video at the same time. This no longer happens. (N.B. Security Update 2007-009 1.1 requires both a restart and a permission repair.)
If you get problems with viewing video on a website try moving this file to your Desktop:
Hard drive/Library/Internet Plug-Ins/QuickTime Plugin.webplugin
and then restarting Safari. If all now works, you can trash that file.
In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them). However it should be noted that Perian is not an internet plugin and will not play DivX files imbedded on a website. For that you will need the DivX Player browser plugin available from http://www.divx.com/divx/mac/
Now go to Safari Preferences/Security, and tick the boxes under Web Content (all 4 of them) to enable Java.
Lastly open Audio Midi Setup (which you will find in the Utilities Folder of your Applications Folder) and click on Audio Devices. Make sure that both Audio Input and Audio Output, under Format, are set to 44100 Hz, and that you have selected 'Built in Audio'.
Important: Now repair permissions and restart.
You should also consider having the free VLC Player from http://www.videolan.org/ in your armory, as this plays almost anything that DVD Player might not.
FOOTNOTE
If you are running Leopard:
Some users have mentioned that the latest Flash Player (v.9.0.115.0) conflicts with Leopard, and that they have needed to revert to v. 9.0.47. This can be downloaded from here:
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14266&sliceId=1

QuickTime Content Does Not Load When Using Safari

For the past week or so, I've noticed that when using Safari, any QuickTime content fails to display, but instead, the QuickTime logo is displayed with a question mark in the center. That would indicate to me that Safari is not seeing that QuickTime is installed, but of course, it is. I tried actually reinstalling QuickTime, but that did not resolve the issue.
Again, this has only started in the last week or so. I'm new to the MAC world, so my troubleshooting skills are more limited with OSX. I also have Firefox installed, and QuickTime content opens as normal when using Firefox.
Any help would be appreciated. Thanks.
iMac (Intel) Mac OS X (10.4.7)

I have had the same problem for some time now. As well as this problem, some QT movies load into QT but the sound does not play.
This all started when I loaded various other players such as VLC to run Windows Media Player stuff before Flip 4 Mac became universal. I have tried dumping prefs, turning off plug ins and a dozen other things between QT and Safari, including resetting Safarai and losing all my log ins etc.
Nothing runs on say www.youtube.com We just get the big Q with a question mark over it. The keynote address released yesterday does not play with sound.
I suggest we all look back and list what we did/installed just before the problem started and then we can compare and look for a common element.
As to checking "block pop ups" I never had that on to begin with.
We need to see if the problem is in Safari or Quicktime - or both. There are too many variables at the moment to narrow down the problem.
Our other iMac which is identical does NOT have the problem - because I didn't try to load any other software on to it.

My entire TV show library does not appear when using home sharing to ipad

I've tried everything to get my entire library to show when using home sharing on the ipad but it only displays the shows under letter A to the beginning of F. Is there a limit on the seasons that can be displayed? Im streaming from itunes on a PC.

I figured out my own problem. Thanks dmule you're a genius. All I had to do was turn off home sharing on my iPad and then turn it back on. Now all the video art work matches their proper movies.

Voicemail showing as "has stopped working" when using MRA & SSO via Expressway 8.5.1

Hello Everyone,
I have my Mac connected to our CallManager via Expressway 8.5.1 MRA using SAML SSO using Jabber Version 10.6.0 (202336).
Our CallManager, IM&P and Unity Connection Servers are all 10.5.2
My issue is that Voicemail shows as "has stopped working". It does not do this for SSO users who are not using MRA.
If I disable SSO it works fine (username/password on Jabber starup and same username/password on Voicemail login page once connected)
I have not yet tested if Jabber for Windows is affected when using MRA via Expressway.
UPDATE: This issue affects Jabber for iOS as well with the same error
I have a Problem Report from the machine if required.
Any help you can provide will be appreciated.
Many Thanks,
Brian Skelly

Please, run the DirectX diagnostics tool. Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post. Be aware that you will have to zip this file before attaching it here.

Edge not loading when using the go-back / go-forward buttons from the browser?

Hello everyone,
I'm working on a test site where the Edge animation is part of a slider using jQueryTools. The animation works when you click the menu options, going from Page C, to page A, to page B, back to page C which has the Edge animations.
But when using the go-back and go-forward buttons of the browser, it doesn't work. It don't even show the preloading gif.
I already added the meta data for avoiding loading the page into the cache, added the function to call the Edge animate in a $(document).ready event for jQuery.
The setup will get a little bit complicated, as I have 2 different Edge animations going on, and will use the bootstrap function to show multiple edge objects.
The main issue for now, is to check if anyone has experienced the issue of the go-back/forward buttons.
Thanks for your time and help!

So i got the following error message:
Uncaught ReferenceError: AdobeEdge is not defined
This happens when using Chrome and going from link to link and getting back to the page wehere we are using Edge Animate.
The first time that it loads, is fine.
Any idea?

No content loads when using portal links

We recently upgraded from 3.0.9.8.2 to 3.0.9.8.5 and in the new version we are having issues with our favorites portlet as well as any links that users create to send to other users. In the new version, after a user logs in, if they click on a saved favorite link, the new page does not load. The tabs at the top of the screen stay and the content of the page is left blank. The same thing happens if you copy a link into the browser window after logging in. However, if you navigate to the tab that the link is going to, and then go back to the login page and use the link, it works fine. We have a TAR logged with Oracle and they do not know what is wrong. Has anyone experienced a similar problem or know a solution?
After testing, we came up with something interesting. When we were creating favorites, we were going to the page we wanted, copying the URL, and pasting it into a favorite. This URL is fairly short. Just now I tried right clicking on the folder I wanted to make a favorite and copying a shortcut. This URL is much longer (although it should point to the same place as the short one). When I tested the favorites, the first URL loaded a blank screen (as you saw in the ODC), but the second loaded the page correctly. I went back to our System Test environment to make sure that the problem does not exist there (this instance is still 3.0.9.8.2). Both the short URL and the long URL worked. Why should patching the portal cause the short URLs, which worked before, to
stop loading pages correctly? Here is an example:
Portal Production (3.0.9.8.5)---------------------------------------------------------------------------
URLs for My Regional tab
WORKS(right-click and copy shortcut)
http://portal.us.colorcon.com:7777/pls/cc_prod/CC_INTRANET.wwpob_page.changetabs?p_pageid=952&p_regionid=2264&p_portletid=956&p_mainpageid=952&p_mode=3&p_debug=0&p_back_url=http%3A%2F%2Fportal.us.colorcon.com%3A7777%2Fservlet%2Fpage%3F_pageid%3D952%2C956%26_dad%3Dcc_prod%26_schema%3DCC_INTRANET
BREAKS(navigate to page and copy URL)
http://portal.us.colorcon.com:7777/servlet/page?_pageid=952,956&_dad=cc_prod&_schema=CC_INTRANET
URLs for QA Tab under My Knowledge (this is a sub-tab)
WORKS(right-click and copy shortcut)
http://portal.us.colorcon.com:7777/pls/cc_prod/CC_INTRANET.wwpob_page.changetabs?p_pageid=952&p_regionid=2277&p_portletid=997&p_mainpageid=952&p_mode=10&p_debug=0&p_back_url=http%3A%2F%2Fportal.us.colorcon.com%3A7777%2Fservlet%2Fpage%3F_pageid%3D952%2C954%2C960%2C997%26_dad%3Dcc_prod%26_schema%3DCC_INTRANET
BREAKS(navigate to page and copy URL)
http://portal.us.colorcon.com:7777/servlet/page?_pageid=952,954,960,997&_dad=cc_prod&_schema=CC_INTRANET
Portal System Test (3.0.9.8.2)-------------------------------------------------------------------------
URLs for My Regional tab
WORKS(right-click and copy shortcut)
http://hercules.us.colorcon.com:8020/pls/cc_prod/CC_INTRANET.wwpob_page.changetabs?p_pageid=952&p_regionid=2264&p_portletid=956&p_mainpageid=952&p_mode=3&p_debug=0&p_back_url=http%3A%2F%2Fhercules.us.colorcon.com%3A8020%2Fservlet%2Fpage%3F_pageid%3D952%2C956%2C960%2C964%2C48%2C47%2C614%2C50%2C103%2C49%26_dad%3Dcc_prod%26_schema%3DCC_INTRANET
WORKS(navigate to page and copy URL)
http://hercules.us.colorcon.com:8020/servlet/page?_pageid=952,956,962,964,48,47,614,50,103,49,1006,1020,1154,1060&_dad=cc_prod&_schema=CC_INTRANET&2086_IT_EBUS_PROJ_93987.p_subid=83600&2086_IT_EBUS_PROJ_93987.p_sub_siteid=1&2086_IT_EBUS_PROJ_93987.p_edit=0

Hi,
The reason why I decide to use Light Framework, itu2019s because Iu2019m creating an EFP, and Iu2019m using the WPC to publish the content (articles, news, and link list), using the standard Web Forms.
The problem is, after adding to a WPC Page something so simple like an article (using the Web Form Article), no Portal iView, HTMLB or other stuff included, the preview of the WPC Page using the Default Framework Page is ok, but when using the Light Framework Page, the text in the article doesnu2019t have the correct font-family. It looks like there are some styles missing in the Light Framework Page, that WPC content is expecting.
Thanks and Regards,
John

Nokia N8 Freezing When Using Opera

I have upgraded my Nokia N8-00 to Nokia Belle and whenever I try to open opera mobile or opera mini and after using for a little the phone freezes forcing me to hold the power key for 8 seconds and the device vibrates 3 times. I downloaded opera browsers from ovi store but I think that opera has not released opera for Nokia N8-00 running on Nokia Belle. Also I cannot run more than two applications when running opera as the device freezes
Any help will be appreciated.
Ngwangwa - Six Million Ways To Die Choose One

@bassmantrb5ii and @rayhipkiss
I did what you have instructed me to do. I performed a factory reset by *#7370# then reinstalled Nokia Belle and downloaded Opera Mobile through ovi store and the problem was the same. The browser seemed to b freezing and after closing it it makes the phone become very slow. I have almost 86.1MB free memory on C: Phone Memory and almost 8.6GB free on E: Mass Memory. Opera Mini seems to work very fine.
Do this when you open Opera Mobile and at the settings tab click on settings then go to advanced and after that at User Agent select Desktop and I am sure that it will give you the same problem. I kept User Agent as Desktop so that I can be able to view pages like I do in my computer and that is the main reason why I downloaded Opera Mobile. When I was using Symbian Anna it worked very fine even though I set the User Agent as Desktop. I think that the problem is with Opera Mobile and not with my phone.
Do what I have told you to do and give me your feedback as soon as possible.
Thanks in advance
Ngwangwa - Six Million Ways To Die Choose One

Choose accent color for hovered icons when using dark interface in Bridge?

How about add the ability to choose the accent color for hovered icons when using a dark interface in Bridge? Currently, the icon color remains orange and unchangeable. Personally, I would prefer a blue accent color to match my system. Any chance of making this possible in CS6?

Oh, I should add that I'm looking for solutions somewhat up-to-date and/or are related to or designed for 10.6 Snow Leonard. I did a search for answers before asking the question, and the (mostly unsatisfactory) answers I found were all from several years ago and applied to earlier versions of OSX (10.3, 10.4, etc.), and therefore no longer were relevant or usable.

Problem with Image loading when using ajax request

Hi,
I am uisng "https://ajax4jsf.dev.java.net/ajax" for ajax in my JSF
and my JSP is:
<a:outputPanel id="newsPanel">
<div id="newsImage" class="myclass">
<h:graphicImage id="img" url="#{mgr.path}" rendered ="#{(mgr.path != null)}"/>
</div>
<div class="myclass">
<a:commandLink id ="update" action="#{mgr.image}" reRender="newsPanel">
<h:graphicImage id="prevbtn" value="../assets/arrow_small_left.gif" />
</a:commandLink>
more stories
<img src="../assets/arrow_small_right.gif" align="absmiddle" />
</div>
<div class="myclass">
<h2>USA</h2>
<div class="newsContent">abc.</div>
</div>
</a:outputPanel>
mgr is alias name of my backing bean
**my backing bean is:**
public class LoginManager {
private String path="D:/images/xyz.jpg";
private String imgPath;
public String getPath() {
          return path;
public void setPath(String path) {
          this.path = path;
     public String getImgPath() {
          return imgPath;
     public void setImgPath(String imgPath) {
          this.imgPath=imgPath;
     public void image(){
          setImgPath("D:/images/abc.gif");
First time image is loading properly.When i click on Previous button previous image is not loading and in console it is showing warning as
Jun 5, 2008 9:29:55 AM com.sun.faces.taglib.jsf_core.ViewTag doStartTag
WARNING: "JSF1062: WARNING! The response object returned by ExternalContext.getResponse() doesn't provide a method with signature 'public void flushContentToWrappedResponse()'. This method is necessary in order to provide content interweaving in a JSP environment. Because of this, content will not be displayed correctly.
What might be the problem.
Please help me out ASAP...
Thanks in Advance,
Narvish

Have a look throughout the forum (and google), JWS retrieved url syntax changed in 5u16 (or 14 I can never remember).
Otherwise keep waiting for some good samaritan, good luck with it, most people are sick tired of this topic.
Bye.

Problems to show IVI driver, properts loader when using operator interface

Similar Messages

Maybe you are looking for