Problems to sync after Upgrade Touch 4G

Hi folks,
right after upgrade my Ipod Touch 4G to iOS 5 I experience major problem with syncing my IPod with ITunes (Also updated)
In most tries Itunes tells me that it cannot connect properly with the IPod and I need to restore it.
This happens with and without firewall.
I am wandering because before the update of the IPod and Itunes I had never problems with my firewall.
Besides that ITunes also always tries to fill more music on my Ipod that it has capacity. Mostly somewhere between 0,3 - 0,6 GB
I must admit it is slighty frustrating that I have to restore my IPod everytime I want to sync.

Sadly not, I found a workaround, which should not be final (hopefully)
You need to deactivate the autofill option for the music and the firewall needs to be turned off.
In this case I am only forced to recover in 30% of the cases not 70%.
But I hope there is a better solution or another update of the software.

Similar Messages

Having problem completing sync after upgrading iOS5 on iphone 3gs

Since I've upgraded my phone to iOS5, I have been having problems complete syncing on my phone.
I'm using an iPhone 3gs.
It always shows step 6, with the message "waiting for items to copy" when I'm not even copying anything or there's nothing to sync.
This will remain unless I pull the cable off my phone.
Is anyone facing similar issue? Any resolutions to this issue?
Thanks.

I'm having same trouble over here.
Did you get your 3gs phone to sync your audio with Itunes?
I can't figure this one out..
Thanks
mS Canada

My iPhone 4S no longer syncs after upgrading from 10.5.8 to Snow Leopard 10.6.3

y iPhone 4S no longer syncs after upgrading from 10.5.8 to Snow Leopard 10.6.3 - any solutions out there?

Thanks - got stuck with the upgrade to 10.6.8, but Apple Support was able to navigate me through that, the date settings caused a problem here.

My phone wont sync after upgrade to 5.0.1 WHY?

my phone wont sync after upgrade to 5.0.1 WHY?

Hi, I'm having the same problem as crystalfromsaline.
The handset advised me to upgrade 5.0.1 so I did and now it wont sync to my mac?? It's detected in iPhoto but not as all in iTunes. The handset still works fine.
I'm currently using Snow Leopard 10.6.3 and have the latest version of itunes.
Hope this is enough info, any help you could offer would be much appreciated.

I am having problems with mail after upgrading to mountain lion. Is there a way to go back to lion?

I am having problems with mail after upgrading to mountain lion. Is there a way to go back to lion?

It would always be easier to fix the Mail problems.

My problem is that after upgrade to IOS 6.1.3 my iphone not sounds! dont have sounds notifications for whatssap, FB, mails and can't listen music and talk with skype without headphones or speakers! only have vibrator and sound for one coming call!! what c

My problem is that after upgrade to IOS 6.1.3 my iphone not sounds! dont have sounds notifications for whatssap, FB, mails and can't listen music and talk with skype without headphones or speakers! only have vibrator and sound for one coming call!! what can i do!???? Thanks a lot for help me!!!!

I have a nearly identical problem with my Ipad 3. Mine is the left channel. I've yet to find help, but have found a number of other posts on this and other forums discussing the issue. People have tried restore, reset etc. Also, cleaning the ports with compressed air or cotton swabs. It appears to be a software issue, but no one is sure.
Along with the original poster, I'd appreciate any help.
As far as the 'level 6' poster, if you're going to be rude, please don't bother. Hope it was just a bad day.

I have problems to sync, my Ipod touch and my Iphone 6 in a port USB 3.0. I renewed my Lap top and when I connect any of those devices they stuck on the itunes screen, but when I return to my old lap-

I have problems to sync, my Ipod touch and my Iphone 6 in a port USB 3.0. I renewed my Lap top and when I connect any of those devices they stuck on the itunes screen, but when I return to my old lap…

Hello jose mariofromsan luis potosi,
I apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are saying that your iOS devices are not showing up in iTunes on your Windows computer, you may find the troubleshooting steps outlined in the following article helpful:
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
On the other hand, if you are saying that your devices are only showing a Connect To iTunes icon screen, then this article may be more useful:
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Regards,
- Brenden

Problem extending VO after upgrade to JDev RUP6

We are having problems extending VO after upgrading from JDev CU2 to JDev CU6. The extended VORowImpl java file extends the OAViewRowImpl instead of the VO that we are extending. Other files are fine except for the VORowImpl
Is there any JDev setting we need to set for CU6?
Any help/insight is appreciated.
Thanks,
Ramesh

Hi,
R u mean to say ur extended VO's changed automatically,or ur having problem extending the new VO's.
Thanks

IPhone won't sync after upgrading to Leopard

My iPhone won't sync, or even show up in iTunes, after upgrading to Leopard. I've tried restarting my Macbook Pro, trying different USB slots, closing and reopening iTunes, everything. Has anyone else had this problem??
I've tried everything apple suggests:
1. The iPhone battery might need to be recharged. For information about charging iPhone, see "Charging the Battery" in the iPhone User's Guide.
2. If that doesn't work, disconnect other USB devices from your computer and connect iPhone to a different USB 2.0 port on your computer (not on your keyboard).
3. If that doesn't work, turn iPhone off and turn it on again. Press and hold the Sleep/Wake button on top of iPhone for a few seconds until a red slider appears, and then slide the slider. Then press and hold the Sleep/Wake button until the Apple logo appears.
Note: If you enter the PIN incorrectly three times, you may need to contact your carrier for a Personal Unlocking Key (PUK) to enable your SIM card again.
4. If that doesn't work, restart your computer and reconnect iPhone to your computer.
5. If that doesn't work, download and install (or reinstall) the latest version of iTunes from www.apple.com/itunes.

You might need to remove and reinstall the Apple Mobile Device Service. Follow the link below for info on how to do this.
http://docs.info.apple.com/article.html?artnum=306637

ITunes movie playback, audio and video not in sync after upgrade to Mountain Lion

After upgrading to Mountain Lion I have problems with iTunes movie playback, and the audio/video at times stalls/delays, or skips a few seconds, or even gets out of sync. I feared this problem was isolated to my machine until I saw an article online: http://reviews.cnet.com/8301-13727_7-57489874-263/sound-stuttering-after-mountai n-lion-installation/. I have 2011 iMac 27" with 16G RAM and am running the latest iTunes and Mac OS X software, and shutting down extra programs doesn't help. Please let me know of any solution.

I also have this problem, and some videos will no longer play in iTunes.
I get a message that this video is not compatible with this version of iTunes. I have to open the video in Quicktime to watch it.
Unacceptable! This hardware and software is too expensive to have these performance issues.
2011 Mac Mini, 8GB RAM, Duo core, iTunes library on NAS on wired network. Mountain Lion 10.8.2. iTunes 10.7 64 bit.

Several audio problems on ziio after upgrade 2.2.1

Hello everyone, sorry for my broken English - my problem: after upgrading from froyo to eclar on ZiiO 7-inch 8 gb does not work anymore speakers only headphones work-thanks to those who can help me-Albert

Hi kamrang,
As far as I know, the ZiiO 7 supports Skype audio only. It does not support Skype video.
You may wish to consider a dedicated webcam that allows you to do both voice and video calls. You can view the range of webcams here. You can also take a look at the Live! Cam Sync HD as well.
Regards,
Colin-CL

No sync after upgrade to Datasync Mobility Pack 1.2.5

Hello All;
Server is SLES 11 SP2 x86_64 running as a guest VM in a XEN host, GW 2012 SP1
Running Datasync Mobility Pack 1.2.4 and all android devices synced properly.
I've upgraded from Datasync Mobility Pack 1.2.4 to Datasync Mobility Pack 1.2.5. Now only the Android 2.2 devices syncs properly but not the Samsung SII, Android 4.04 device.
I've deleted the device from the mobility connector, reconnected the Samsung SII, Android 4.04, still no sync
I've deleted the user, re added the user, reconnected the Android 4.04 device, still no sync
I've delete the mail account on the Samsung SII and created a new MS Exchange account, still no sync.
Ran the 'python mcheck.pyc' on the problem account which states problems with the mobility folder structure, as noted below.
No GroupWise configuration problem detected.
Mobility Folder structure problem detected
Email Summary (Inbox only)
GroupWise Inbox count: 26
Mobility Inbox count (success): 0
Mobility Inbox count (failure): 26
Calendar Summary
GroupWise Calendar count: 257
Mobility Calendar count (success): 1
Mobility Calendar count (failure): 256
Contacts Summary
GroupWise Contacts count in synced books: 138
Mobility Contacts count (success): 0
Mobility Contacts count (failure): 138
Log file location: logs/john_2013-02-26T20:04:46.log
User problem detected. Do you want to correct the problem by re-initializing the user? (yes/no)
I've said yes to re-initialize the user, and reconnected the problem device, still no sync.
I've restarted the XEN guest VM server several time
Seems some of the contacts synced bu not all, no calendar, no mail.
Any help, suggestion, wild guesses?

Read through and wanted to add input to this.
(A few months later I know)
I just Updated Mobility to 1.2.5 299. Had the issue after the update where SLES would show "invalid root file system".. got past that by running the MKINITRD.
After the update, random users could no longer sync their inbox. Everything else worked fine, calendar events remained synced and they could still send mail.
Looking at the DataSync Mobility Monitor and navigated to that users stats, each user that had issues did not have their "/inbox" listed.
No amount of re-sync or re-initialize would resolve.
No GWCHECKs would resolve.
No rebuilding the user DB or Structural Rebuild would resolve.
Python MCHECK can see the 'sync failures' on the mobile device config, offers to re-init to no avail.
Resolution
It is the dumbest fix in the world I swear......
THEIR MAILBOX was moved into a sub-folder in the GroupWise client. (so many 4 letter words)
After having the user drag their mailbox out of the or any and all sub-folders, re-initialized the user, *angels sing* and the "/inbox" is now listed as an available folder in the Mobility Monitor for that user.
Mobility could not find the inbox in order to index or label it (or know where to place it on the mobile device). Something like that...
I have seen the weirdness that can occur is someone decides to share out their entire mailbox, never would have thought having the mailbox in a sub-folder would brake Mobility after upgrade. Not going to test if moving it back into a sub-folder re-brakes it, but it looks like the mailbox cannot be in a sub-folder for the initial sync.
Hope this helps someone.
Josh.

Problems with Hotspot after upgrading to OS 10.3.1.1565

SInce i have upgraded the OS to the lastest version on my Q10, the Hotspot has stopped working. Previously it was was working absolutely perfectly. I have checked other support forums and a lot of users are facing the same problem after upgrading to OS10.3.
I would like to know how soon a patch to fix this problem will be made available by Blackberyy.

Known issue. No ETA on a resolution yet, unfortunately.
http://www.blackberry.com/btsc/KB36801
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Wifi problem of G560 after upgrading to windows 8.1

Hi,
I have a lenovo G560. After upgrading from windows 8 to windows 8.1, I cannot connect to wifi. I was wondering if someon else has the same problem.

hi amardoukhi,
Welcome to the Forums.
Your issue might be similar to this thread. Try the solution that was posted to rollback to an older driver version.
The solution was to:
1. Open Device Manager (press WInkey+R > type devmgmt.msc)
2. On the Device Manager, navigate to Network Adapters > right click on the wireless adapter and choose Update Driver Software
   - Link to picture
3. On the Driver Update Window, choose Browse my computer for driver software > Let me pick from a list of device drivers on my computer and choose the wireless card on the list.
   - Link to picture
   - Link to picture
   - Link to picture
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

[SOLVED] Problem with murmur after upgrading to 1.2.3-4

I've been running Murmur on my server for a long time without problems. The last version I had running was 1.2.3-3. After upgrading to 1.2.3-4, the already-running murmurd process crashed after a while (some hours after the upgrade, after constant use) and I'm unable to restart it. The message I get is:
:: Starting murmur [BUSY]
<W>2012-01-07 22:06:11.133 Initializing settings from /etc/murmur.ini (basepath /etc)
<W>2012-01-07 22:06:11.134 OpenSSL: OpenSSL 1.0.0f 4 Jan 2012
<W>2012-01-07 22:06:11.134 SSL: Adding recommended CA StartCom Certification Authority
<W>2012-01-07 22:06:11.134 SSL: Adding recommended CA AAA Certificate Services
<W>2012-01-07 22:06:11.135 SSL: Adding recommended CA UTN-USERFirst-Client Authentication and Email
<C>2012-01-07 22:06:11.135 Successfully switched to uid 1007
<F>2012-01-07 22:06:11.230 ServerDB: Failed initialization: unable to open database file Error opening database
[DONE]
and in murmur.log nothing gets written. Downgrading to 1.2.3-3 works, but I thought I'd look for the cause of the problem.
After poking around a bit, I noticed that my murmur database (/var/lib/murmur/murmur.sqlite) belongs to a nonexistent user with a UID of 86 and a GID of 86, as well as the whole /var/log/murmur/ directory. I also noticed that a new murmur user and group with UID and GID of 1007 and 1000 exists on the system now. It seems that running:
sudo chown -R murmur:murmur /var/lib/murmur/ /var/log/murmur/
fixes the problem. Perhaps the update deleted my pre-existing murmur user and group and recreated them?
Edit: Guess I should mark this as [SOLVED].
Edit edit:
Also turns out the whole /var/lib/murmur/ directory has to belong to murmur, not just the sqlite file.
Last edited by n17ikh (2012-01-08 03:22:39)

I had the same problem and fixed it like you.

Problems to sync after Upgrade Touch 4G

Similar Messages

Maybe you are looking for