Problems trying to load SCORM version of Presenter module with Macs

Hi there
I am thinking of using a Presenter module to provide orientation information to students. The module will have quizzes embedded in it. Because of this, I am planning to upload the Presenter file as a SCORM package to our Learning Management System.
I am a little concerned about doing this as I have experienced difficulties at the client end in the past. I uploaded a Presenter module in a similar way a year ago. PC users had no trouble accessing the module, but Mac users did. They couldn't access the module but, luckily, in both cases, had access to PCs that they could use instead.
When the Mac users tried to access the SCORM content through the LMS, they received a message that essentially said that the selected item contained no content. To my knowledge, both users had Flash installed on their Macs. This problem was not experienced by the PC users who were able to access the SCORM package without issue.
I'm not certain whether this is a problem unique to our LMS, but I vaguely recall a colleague finding a problem to this solution (perhaps a patch?) that was Presenter, rather than LMS driven. Unfortunately, he's on extended leave so can't help out at the moment. Would appreciate your thoughts.
Thanks
Peta

Similar Messages

Trying to load latest version of BBM to my 9900

I am trying to load latest version of BBM to my Blackberry 9900 phone. When I start the process it takes me to Blackberry World Store Setup. I have successfully loaded the Blackberry World Browser Plugin on my computer (step 1 in the process). Step 2 in the process is to connect my device to the computer. I do this, and my computer recognizes that the device is connected, but the Blackberry process screen does not show that I have done so. Due to that I cannot move forward any farther in the setup process. Help.........

Are you able to load BBM directly from BlackBerry World on your phone?
http://appworld.blackberry.com/webstore/content/3729/?lang=en&countrycode=US&region=36&IID={cc}:bb:b...
I hope that helps you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

I have a mac book pro and am trying to load microsoft suit it says I need mac ox 10.6 or higher but my computer says their are no updates and i and i am at 10.5.8 what do i do

I have a mac book pro and am trying to load microsoft suite it says I need mac ox 10.6 or higher but my computer says there are no updates My computer is currenly
at 10.5.8 what do i do

Click here for it.
(114955)

Which version of photoshop works with MAC lion os x 10.7.4

Hi
Which version of photoshop works with MAC lion os x 10.7.4 ?
Thanks

Allan Eckert wrote:
I used PS3 with Lion and had no problems.
Allan
That's what I said.
It works, but Adobe doesn't list anything newer than Leopard as a requirement, and they don't specify it as a "minimum", but I have CS3 on my Snow Leopard and Lion machines. The Lion has CS4 as well, and they run quite well independently of each other.

Using the current version of photoshop CC with Mac OS 10.9 for the next 5 or so years on same mac?

I am intending to upgrade to photoshop CC from photoshop CS6, my concern is is my computer is 6 years old and probably I will not be able to upgrade to a later mac operating system as I have mac os 10.9, and I may not be able to upgrade to a future version of photoshop, will I be able to use the current version of photoshop CC with Mac OS 10.9 for the next 5 or so years on same mac?, I know I can do this with Photoshop CS6.

There's no reason why you can't do both. You will always have CS6 to fall back on if the need should ever arise, the same as most of the regular posters here. But you could enjoy CC for as long as it suited you, and it has some very features and more are coming all the time.
We've seen two nice updates to Photoshop CC in the eight months since the subscription model went live. (Have I got that right?) So we can expect three a year or more, and there were some killer new features in 14.2. Heck, it would already break my heart if I had to go back to CS6. In another four years... It ain't gonna happen.

Can i get a version of firefox compatible with mac os 10.5.8

can i get a version of firefox compatible with mac os 10.5.8

Yes. At the moment Firefox 3.6.23 is supported, secure & compatible with OS x >= 10.4
* see [[installing a previous version of firefox]]
* http://www.mozilla.org/en-US/firefox/3.6.23/system-requirements/

Problems trying to load a full version of office home and student 2010

I am trying to load office 2010 but it will not load, It just keeps saying its a trial version. I rang microsoft and they told me I have to un install the trial version installed on my touchsmart 310-1025a.
Apparently it is put on there at manufacture stage. Can anyone tell me how to uninstall the trial so that it will let me use my full version. thanks

Hi,
jacquitos wrote:
I am trying to load office 2010 but it will not load, It just keeps saying its a trial version. I rang microsoft and they told me I have to un install the trial version installed on my touchsmart 310-1025a.
Apparently it is put on there at manufacture stage. Can anyone tell me how to uninstall the trial so that it will let me use my full version. thanks
This article from the Microsoft knowlege base has a few different ways to uninstall it. There is also a Microsoft Fixit utility specifically for Office 2010.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Problems trying to load specific vendor CD's/DVD's

Hi to all! I have a bit of a problem: Late 2006 I bought a Mac Book Pro, worked wonderfully. In 2008 bought another Mac Book Pro, and gave the other one to my wife. Last year I upgraded both to SL, which in itself was an adventure, but since then I've been experiencing several problems with the CD/DVD drive. The last problem, which motivates this cry for help, is that 2008 Mac Book Pro does not recognize original X-Plane Deluxe DVD purchased mid 2007, and keeps spitting it every time I insert it in the CD bay. 2006 Mac Book Pro does recognize X-Plane Deluxe DVD though. Is there any corrective action that I can do in order for the CD/DVD to accept these DVD's? Your comments shall be deeply appreciated.
Regards,
Jorge Yatim

That program may need Rosetta installed on the 2008 MBP in order for X-Plane to run.

Load Balancing Oracle BI Presentation Server with OC4J

Hello All,
Is there a way to perform Load Balancing Oracle BI Presenation Server the way we do with IIS (defining in ISAPIConfig.XML file)?
I am looking some pointers towards Clustering/Load Balancing Oracle BI Presentation Servers using OC4J not IIS.
Thank you.

Thanks , the Oracle BI Presentation Server is running now ,but still the oc4j display the below error :-
C:\OracleBI\oc4j_bi\bin>oc4j.cmd -start
Starting OC4J from C:\OracleBI\oc4j_bi\j2ee\home ...
10/05/06 13:58:31 Error initializing server: /C:/OracleBI/oc4j_bi/j2ee/home/conf
ig/server.xml, Fatal error at line 1 offset 1 in file:/C:/OracleBI/oc4j_bi/j2ee/
home/config/server.xml: .<Line 1, Column 1>: XML-20108: (Fatal Error) Start of r
oot element expected.
10/05/06 13:58:31 Fatal error: server exiting

What is tha latet version of Firefox compatile with MAC OS 10.4.11

When I down load the latest version of firefox supposidly compatible with my compute I get a message it is not compatible and I should dowm load the latest version tha tis compatible with my system, 10.4.11 running on a G 5 based machine. NOT INTELL! So what is the appropriate version and please send me a link!!

Firefox 4 versions and later do not run on a PowerPC Mac.
Firefox 4 and later require at least OS X 10.5 and an Intel Mac.
*http://www.mozilla.com/firefox/9.0/system-requirements/
For an unofficial Firefox 9 compatible version TenFourFox that runs on PowerPC Macs with OS X 10.4.11 and OS X 10.5.8 you can look at:
*http://www.floodgap.com/software/tenfourfox/
*http://www.macupdate.com/app/mac/37761/tenfourfox
*http://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
Firefox 3.6.x (Mac OS X 10.4 and later) can be found here:
* http://www.mozilla.com/en-US/firefox/all-older.html

What version of photoshop works with Mac Mountain Lion?

I have an older Mac. Upgraded to Mountain Lion. Installed CS3. All works fine but for photoshop. Is there a fix? Or is there a version of photoshop that will work with ML that I can purchase?

Moving this discussion to the Photoshop General Discussion forum.
Jim Sloan do you receive a specific error when trying to use Photoshop CS3 under Mac OS 10.8?
If you are looking for a version of Photoshop designed for Mac OS 10.7 and later then I would recommend Photoshop CC. There a couple different options to subscribe at the moment. You can find more details at https://creative.adobe.com/plans/offer/photoshop+lightroom?promoid=KHQFP and https://www.adobe.com/products/creativecloud/buying-guide-at-a-glance.html. Please be aware that the Photoshop Lightroom Photography bundle is only available for a limited time.

How do I get a free version of iPhoto compatible with Mac OS 10.8.5?

After upgrading to Mac OS 10.8.5, my previous version of iPhoto would not work. I have since trashed the non working version of iPhoto. The available free download versions of iPhoto will not work with Mac OS 10.8.5. How can I get a free download version of iPhoto compatible with 10.8.5 without purchasing a new copy??

There is no free upgrade for Mountain Lion. The free upgrade is only for Mavericks.
The iWork apps are free with a new iOS device since 1 SEP 2013. They are free with a new Mac since 1 OCT 2013. They are also free with the upgrade to OS X Mavericks 10.9 if you had the previous version installed when you upgraded.

Firefox new install on XP, problems trying to get same-version-Firefox old W2K profile to run.

I'm moving from a W2KproSP4 (Win2000, Windows 2000) machine to an XPproSP3 (WinXP) machine. I was running AVG 9.0 and Firefox 3.6.7 with FireFTP, NoScript, WOT, and screengrabber(?). I installed Firefox on the XP machine, launched it to create a profile, and closed it. I copied the old profile folder contents into the new one.
On launch: "Malformed file" "Firefox could not install this item because "install.rdf" (provided by the item) is not well-formed or does not exist. Please contact the author about this problem." (This error disappears in Firefox Safe Mode.) Install.rdf is on the old drive at \Program Files\AVG\AVG9\Firefox.
"alert" "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory."
When I click on Tools/Addons, "An error occurred during a connection to services.addons.mozilla.org:443. Can't connect securely because the SSL protocol has been disabled."
I tried uninstalling AVG and Firefox and installing Firefox first. (That helped me with Link Scanner related non-launch on another XP machine.) Depending on which combination of old & new profile files I have, I get some combination of the above 3 errors and not launching at all. (It may show for about 1 second in Task Manager, then quit.)
P.S. I am posting this from my old W98SE machine, running Firefox 2.0 since it won't launch anything newer. I never did solve that mystery.
== This happened ==
Every time Firefox opened
== I am moving to a new O/S

Hi the-edmeister, thank you so much for your time.
I'm proceeding more cautiously now, and trying to get my most crucial info back one step at a time. The situation seemed to be getting worse, so I fell back a ways for a fresh swing at it:
I just restored to a Ghost of the XP before I installed Firefox, uninstalled AVG, and installed the same version of Firefox (3.6.7) as my old computer had. The W2K's old drive is slaved to my new HD, so I have access to the old files in (what is now) H:.
I tried to restore bookmarks-2010-07-24.json from my old bookmarkbackups directory and got "unable to process backup file". (I also tried copying several files to the bookmarkbackups dir and restoring from there, but got the same error message.) Help>TroubleshootingInfo confirms the current profile folder, and the copied JSONs were seen by OrganizeBookmarks>Import-and-Backup>Restore.
Then I copied places.sqlite from the old profile to the new one, but Firefox doesn't see my bookmarks. When I backup bookmarks to my desktop, I get a zero length .JSON file. Is there a trick to making places.sqlite active?
BTW, yes, I've tried to update the Firefox version 2.0 on the W98SE, most recently to 2.0.0.20, but whenever I do, it runs invisibly (is present in Program Manager but doesn't display the window.) I have to uninstall and reinstall 2.0 to have a working Firefox on this beast. Thanks for noticing. That's another topic, tho.

BPA Web Client Components Problem trying to load applet

Hello!!! I installed BPA Repository and Oracle HTTP Server and I started up my server with y-serverlauncher.sh and after that, I started up the OHS with command:
./opmnctl startall
The system is running in Oracle Linux 5.7 and Oracle BPA Suite 11.1.1.1
My problem is when I try to open BPA through an URL http://server:7784/bpa/index_app.html.
The message I am getting is:
Java Plug-in 10.4.1.255
Using JRE version 1.7.0_04-b22 Java HotSpot(TM) Client VM
User home directory = C:\Users\Dennis Garces
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
Temporary directory: C:\Users\DENNIS~1\AppData\Local\Temp\
Using default directory.
Local download directory: C:\Users\Dennis Garces\ARIS71\DownloadClient/192.168.56.129
Detecting proxy settings...
[PROXY] host:
[PROXY] port: -1
[PROXY] used: false
Warning: Help file /lib/oem02/biztalkodxgen_en_help.jar does not exist!
Warning: Help file /lib/oem02/DevTools_en_help.jar does not exist!
Fatal error: An error occurred while downloading required files.
Unable to download /lib/jaxws-api.jar. File does not exist.
Possible reasons include:
- the URL you use to connect to the ARIS Client is not correct. Please contact your System Administrator if in doubt.
- you do not have write access to the local download directory
- there's no space left on your local hard disk drive.
Trace level set to 5: all ... completed.
Does anybody have any suggestions? I am installing as indicated in the BPA install guide, but I think I missed something.
Thanks in advanced!!!!

Update -
One of the clients that IS connecting is running the latest: 1.5.0_09 which makes no sense based on the other behavior.
Well we figured it out (I think). If you have 1.4.2_06 on the box, you can connect, it installs the applet and you get in. If you then upgrade or uninstall/reinstall 1.5, Discoverer still works. Now we haven't tested anything else other than just logging in so what ever might blow up on us is still in question.
But what it looks to be is that the kick off for the install is failing under 1.5 and once it's on the system, using a newer version is just fine. Now without really knowing/understanding what's going on under the hood this is just an assumption. However I've repeated it on a couple XP machines so far.
That is, have 1.5 on the box, fail to get to Discoverer. Uninstall, then install 1.4, get Discoverer loaded, then upgrade/reinstall 1.5 and move on.
We did give JInitiator a try but had similar strangeness happen and gave up since the client machines should have a copy of 1.4 on them to begin with. It's a matter of ironing out the details with our app. Hopefully 1.5 will be compatable by the time we go live which isn't for some time yet.

[SOLVED] PyDev problems - trying to load xmlrpclib

I'm currently stuck trying to figure out why I can no longer debug my python3 program. Whenever I try to start the debug session, I get the following:
Traceback (most recent call last):
File "/usr/share/eclipse/dropins/pydev/eclipse/plugins/org.python.pydev.debug_2.5.0.2012040618/pysrc/pydev_imports.py", line 3, in <module>
import xmlrpclib
ImportError: No module named xmlrpclib
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/share/eclipse/dropins/pydev/eclipse/plugins/org.python.pydev.debug_2.5.0.2012040618/pysrc/pydev_imports.py", line 5, in <module>
import xmlrpc.client as xmlrpclib
File "/usr/lib/python3.2/xmlrpc/client.py", line 133, in <module>
from xml.parsers import expat
File "/usr/lib/python3.2/xml/parsers/expat.py", line 6, in <module>
from pyexpat import *
ImportError: /usr/lib/python3.2/lib-dynload/pyexpat.cpython-32mu.so: undefined symbol: XML_SetHashSalt
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/share/eclipse/dropins/pydev/eclipse/plugins/org.python.pydev.debug_2.5.0.2012040618/pysrc/pydevd.py", line 3, in <module>
import pydev_imports
File "/usr/share/eclipse/dropins/pydev/eclipse/plugins/org.python.pydev.debug_2.5.0.2012040618/pysrc/pydev_imports.py", line 7, in <module>
import _pydev_xmlrpclib as xmlrpclib
SystemError: Objects/tupleobject.c:126: bad argument to internal function
I've tried
clearing out Eclipse config in homedir and creating a new workspace
going back and installing PyDev 2.4.0 (2.5.0 is now installed, as seen in the error messages),
installing PyDev via Eclipse's internal plugin installer instead of using the AUR package,
linking '/usr/bin/python' to '/usr/bin/python2' instead of python3 (because xmlrpclib is the Python2 version of the xmlrpc.{server,client} in Python3), and even
installing a completely new Arch partition from scratch (enough to get pydev working, of course) without success.
Since I was covering all bases without going into PyDev source code, I also tried a LinuxMint 12 partition and that, of course, worked. Searching Google hasn't led to any solutions that I can find, either (mixed in with all the other attempts above, of course).
Can someone out there please recommend something else to try or perhaps even know what the exact problem is? I suppose the next step would be to look at the PyDev source code, but I'm hoping I won't need to invest that much time into it (slightly hypocritical )...
Thanks for any help on this!
EDIT: forgot about simple steps to clear out Eclipse config files in homedir and creating a new workspace.
Last edited by Janax (2012-06-06 18:50:14)

I finally(!) found the solution!
Short explanation: The issue for me was that I had LD_LIBRARY_PATH set to my Oracle installation.
Long explanation: Library resolution problem since I had LD_LIBRARY_PATH pointing to my Oracle installation (I'm using cx_Oracle in Python as well):
$ ldd /usr/lib/python3.2/lib-dynload/pyexpat.cpython-32mu.so
linux-vdso.so.1 => (0x00007fffabda3000)
*** libexpat.so.1 => /u01/oracle/11.2.0/lib/libexpat.so.1 (0x00007f85bbb74000) ***
libpython3.2mu.so.1.0 => /usr/lib/libpython3.2mu.so.1.0 (0x00007f85bb74e000)
libpthread.so.0 => /lib/libpthread.so.0 (0x00007f85bb532000)
libc.so.6 => /lib/libc.so.6 (0x00007f85bb191000)
libdl.so.2 => /lib/libdl.so.2 (0x00007f85baf8c000)
libutil.so.1 => /lib/libutil.so.1 (0x00007f85bad89000)
libm.so.6 => /lib/libm.so.6 (0x00007f85baa94000)
/lib/ld-linux-x86-64.so.2 (0x00007f85bbeb4000)
I added the *** to highlight the line causing the issue. There are several ways to fix this problem, but I took the one that hopefully will impact the entire system the least (that is, I'm assuming that Arch 'libexpat' is newer than Oracle's version and have Oracle's libraries find/use the Arch version, so hopefully no system issues). Another way to do it would place '/usr/lib' in front of Oracle's entry in LD_LIBRARY_PATH, but that may affect other Oracle libraries as well. Here is what I did:
$ cd $ORACLE_HOME/lib
$ sudo mv libexpat.so.1 libexpat.so.1.NOFIND
$ ldd /usr/lib/python3.2/lib-dynload/pyexpat.cpython-32mu.so
linux-vdso.so.1 => (0x00007fff8b5ff000)
*** libexpat.so.1 => /usr/lib/libexpat.so.1 (0x00007fd00a45f000) ***
libpython3.2mu.so.1.0 => /usr/lib/libpython3.2mu.so.1.0 (0x00007fd00a05b000)
libpthread.so.0 => /lib/libpthread.so.0 (0x00007fd009e3e000)
libc.so.6 => /lib/libc.so.6 (0x00007fd009a9d000)
libdl.so.2 => /lib/libdl.so.2 (0x00007fd009899000)
libutil.so.1 => /lib/libutil.so.1 (0x00007fd009695000)
libm.so.6 => /lib/libm.so.6 (0x00007fd0093a0000)
/lib/ld-linux-x86-64.so.2 (0x00007fd00a8b9000)
After this change, the pydev debugger launches and runs correctly! Woohoo!
Last edited by Janax (2012-06-06 18:51:20)

Problems trying to load SCORM version of Presenter module with Macs

Similar Messages

Maybe you are looking for