Problems trying to publish a flash file with flv component onto a dreamweaver site
Hi, I posted this on the flash forum too, but maybe here is
more appropriate....
if anyone can help me out with this, I would really
appreciate it. I have put a flv file into a flash document,
published it for progressive downloading (the video lasts about 4
minutes) all seems fine when I test the movie.
I then wanted to embed it into my website. Everything seems
fine there too, except that when I preview it in a browser, it
looses its skin.
I copied the swf file and the skin into my remote server
along with the flv file that is placed in the swf.
However when i upload the page, there is no video.......
Is the file to big? Or have I done something wrong. Is there
a script that I'm supposed to do?
Sorry to seem stupid, I'm learning as I go along from the
help topics, and I cant seem to find my answer,
Thanks
John
It had me puzzled too until I realised I had exceeded the
amount of webspace my ISP had granted me. By uploading a FLV file
to my ISP, I had exceeded the 100mb they grant me for nothing. It
was tricky to work this out because there didn't seem to be any
indication that the flv file hadn't uploaded.
Check your webspace allocation to see if it's the same
problem.
Similar Messages
-
Flash files with right click imported in dreamweaver files
Flash files created with Captivate which contain rightclick
functionality are imported to html files created in Dreamweaver. In
other words, I don't use the html created by Captivate but another
html file to build up a whole course. But now a couple of those
flash files contain a right click and obviously I have to adjust
the dreamweaver file with some of the script that William Heinz has
created. I am not an HTML expert and I am not 100% confident that I
can do with just endless try&error. Could anyone give me some
hints?
I suppose I need to use the second bit of William's article
"the more complex requirement".
When I insert the flash file this is what I get: (This is
where I am suppose to make the changes????)
<script type="text/javascript">
AC_FL_RunContent( 'codebase','
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,0,0','widt h','746','height','591','title','Schedule
Let
Me','vspace','5','src','Resources/Sched_LM_skin','quality','high','pluginspage','
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash','movi e','Resources/Sched_LM_skin'
); //end AC code
</script><noscript><object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,0,0"
width="746" height="591" vspace="5" title="Schedule Let Me">
<param name="movie" value="Resources/Sched_LM_skin.swf"
/>
<param name="quality" value="high" />
<embed src="Resources/Sched_LM_skin.swf" width="746"
height="591" vspace="5" quality="high" pluginspage="
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash"
type="application/x-shockwave-flash"></embed>
</object></noscript>
I am not sure what to do with the "<Body
onload='javascript:init()..... "etc as suggested by William.
Thanks for any advice on this!!!I hope there is one person out there who can help me with
this issue.
I have started from scratch and created a blank html with
dreamweaver and inserted the flash file (with right click
animation) created with Captivate.
Then I made the adjustments as per Heinz and also included a
ID=Captivate1 as the RightClick.js refers to that.
The main difference between this html file and the html file
created with Captivate, is that the Captivate one also has
writedocument bit.
Anyway, is there anybody in the world who can give me
atip/hint/suggestion????? -
Flash file with flv. files in it
I have a flash file that is 4.6mb and I need to add 10 to 15 flv files. Is that going to mess up the flash file at all?
It will add as much weight to the fla/swf file as the weight of the flv files, which would be a deterent to using it on the web. Whether or not it messes up the file is a matter of design.
-
Hi I installed a new hard drive in my Mac mini osx lion an when I turn it on I get a flashing file with a question mark. I tried holding command and R keys when turning it on but the recovery fails to work. I can hold the option key at start up and choose my network, then Internet recovery shows up with an arrow pointing up. When I click on the arrow Internet recovery fails and all I get is a globe with a triangle on it with an exclamation mark on it, and under that it says
apple.com/support
-6002F
Does any one know how I can fix this without a recovery disc? ThanksI just want to add to this, in case someone else searches for this error on Apple Support (google doesnt cover apple support.. how clever is that?)
I had the same error. And i had a Computer that had worked, with a SSD drive and 16GB upgrade done by the owner himself.
I tried swapping with a Mechinal Harddrive, no luck.
Kept the Mechanical drive in, and tried with some other Ram, it worked..
So for me this error and after reading the other responses can be boiled down to a Harddrive problem or Ram issue.
It was Ram for me.. -
I've got a 15" white macbook which I bought about 2 years ago. It froze the other day and wouldn't respond so I shut it down. When I turn it on now it comes up with a flashing file with a question mark on it. How can I fix it? I've tried a few things i've seen online but the futhest ive got is to put the start up disk in when you makes it go to a grey screen with an apple logo and the spinning wheel which then stops spinning. Can anybody help?
That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Just press the Return key on your keyboard once.It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is then click on the Mac OS partition of your hard drive in the left handlist. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead. -
Start up problem.....flashing file icon
Problem:
1) few days ago I configured computer for ethernet link between crt imac and powerbook.
2) Now when I start up on the crt only, I get a flashing globe on a square which turns to a flashing file with a question mark in it. And the start up never goes any further.
3) Does anyone have any ideas on how to fix this. thx
ralericYou'll need an OS CD to boot the old machine. There's some problem with the system folder which may or may not have anything to do with your recent configurations. It may be as simple as booting from CD, resetting the hard drive as startup disk, and going from there.
Another issue may be that you set your old machine to automatically connect to the newer at startup. This is an option when setting up file sharing. What happens if the other machine is ON before you start the older one? -
Flash files with audio sound garbled or high pitched
I have finally clarified the sound problem I reported in this
forum.
See below.
TechSmith
Camtasia Studio Support
Flash files with audio sound garbled or high pitched
Question
Flash files played in the the newest version of the Flash
Player sound garbled or have a high-pitched "chipmunk" sound to
them.
Answer
http://techsmith.custhelp.com/cgi-bin/techsmith.cfg/php/enduser/std_adp.php?p_faqid=1250&p _created=1197056770&p_sid=BZo7CNSi&p_accessibility=0&p_redirect=&p_lva=&p_sp=cF9zcmNoPTEmc F9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9MTImcF9wcm9kcz0wJnBfY2F0cz0mcF9wdj0mcF9jdj0mcF9 zZWFyY2hfdHlwZT1hbnN3ZXJzLnNlYXJjaF9ubCZwX3BhZ2U9MSZwX3NlYXJjaF90ZXh0PUZsYXNoIFBsYXllcg**& p_li=&p_topview=1
Flash files with audio sound garbled or high pitched
Question
Flash files played in the the newest version of the Flash
Player sound garbled or have a high-pitched "chipmunk" sound to
them.
Answer
The latest release of the Flash Player (v9.0.115.0 released
on 12/03/07)) causes audio to sound garbled and/or high pitched
like a chipmunk. Our development team is looking into this issue
and working to find a fix.
To avoid this problem, you can roll back your Flash Player to
a previous release. If you have problems installing an older
release of the Flash Player please review this article and contact
Adobe for further support.
At this time, the problem is limited only to SWF files
produced with the MP3 audio codec. As a workaround, you can produce
your SWF files with the PCM audio codec or use the FLV format
instead of SWF.
Adobe Flash Player Support
Reinstalling an earlier version of Adobe Flash Player
Contact Adobe:
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb402435&sliceId=1
Safe versions security restrictions when installing Flash
Player
Issue
If you previously installed a later version of Flash Player
for Internet Explorer, you may be prevented from installing an
earlier version. For example, if you installed Flash Player
9.0.47.0 and attempted to install version 9.0.45.0 the installation
would fail.
Reason
This issue is due to registry key settings applied by the
Flash Player security model. The restriction is to prevent users
from downgrading Flash Player minor versions. The minor version of
Flash Player is the third set of numbers in the version name. For
example, the minor version for Flash Player 9.0.47.0 would be 47.
If Flash Player 9.0.47.0 was installed and you attempted to install
9.0.45.0 (minor version 45), the installation would fail.
Solution
To resolve this, download the uninstaller for Flash Player
from "How to uninstall the Adobe Flash Player plug-in and ActiveX
control" (TechNote tn_14157).
Select Start.
Select Run.
Type cmd
In the command window, type the following:
uninstall_flash_player.exe /clean
This will remove all entries in the system registry and
resolve this issue.
Note: The uninstall_flash_player.exe file must be saved to
the same directory that the command window is in, for example C:\.
Additional Information
If you are still having trouble installing Flash Player,
please see "Troubleshooting Adobe Flash Player installation for
Windows" (TechNote tn_19166).
TechNote Details
Last Update: 08-16-2007
ID: kb402435
OS: Windows Vista
Windows XP
Browser: Internet Explorer
Permanent Link:
http://www.adobe.com/go/kb402435
Products Affected: Flash PlayerHi,
I doubt it's Safari that's changing the settings:
Why does this happen?
Some third-party audio applications may change your computer's audio output setting. In fact, if you use the third-party application again after applying the above solution, the issue might occur again.
No sound from some applications, but system alert sounds play (Mac OS X 10.3, 10.4)
iMac G5 20" 2GB RAM, Soundsticks, Netgear 814 ---> Mac OS X (10.4.3) -
I'm able to transfer iPhotos from Mac to MacPro but data I've added to photos does not transfer. What am I missing? Tried using Thunderbolt, AirDrop, Flash drive with no success. Do I have to use iCloud for 800 vacation photos or re-enter all the data after transfer?
There is no support for mirroring or syncing iPhoto libraries or Aperture libraries. You can however export partial Aperture libraries on one mac and merge them into other libraries on a second Mac.
To transfer your edited photos open your photolibrary in Aperture and and collect the edited photos in an album. Then select the album and use the command "File export > Album as new library". This will export all edited photos as a new Aperture library. Copy this library to your other Mac and import it with "File < Import > Library to your other photolibrary on that computer (assuming you are having the same Aperture version on both macs). When merging the new library into your Aperture library, opt to keep the newer versions from the imported library. iPhoto 9.5.1 will be able to open these merged Aperture 3.5.1 libraries. -
I am trying to organize a zip file with a bunch of links and files. But when I drag an image file to a folder, it always "Snaps to grid" instead of just landing where I put it. All of the files are going into the same zip file but I want them visually in the space that I put them and not at the bottom of the snap to grid folder location they are looking like. I am trying to drag and drop files in groups so that I can group them for now, but image files always do their own "sort by" when I drag them from my web pages. Links don't do it though. I tried resetting the folder, and deleting the DS files. No luck.
You keep asking variants on this same question. You've had replies in all your other threads. If you can't find them, go here and click where it says Activity:
Thomas Cannon Jr. -
How do I get rid of the flashing file with a question mark in it?
I wanted to start clean on my MacBook Pro osx 10.9.4. So I did the command r and erased what I thought was the right one. I restarted my computer and did the command r again and what came up was internet recovery. It can't find my internet because it's WEP and I don't know to change it to wpa. So I restarted my computer again and I didn't do the command r but just let it load itself to see what would happen and all I get is a flashing file with a question mark. I don't know what to do. Someone please help me.
Do you get this display?
If so, you have to select an Internet connection. Do not expect quick response time in this mode. All activities in this mode will be lengthy.
Ciao. -
How to insert a shoutbox and a counter in a flash file with html code?
How to insert a shoutbox and a counter in a flash file with
html code?
Code shout box
<!-- BEGIN MYSHOUTBOX.COM CODE -->
<iframe src="
http://489676.myshoutbox.com/"
width="152" height="300" frameborder="0"
allowTransparency="true"></iframe>
<!-- END MYSHOUTBOX.COM CODE-->
Code compteur
<script type="text/javascript" src="
http://www.123compteur.com/counterskinable01.php?votre_id=268303"></script><noscript><a
href="
http://www.123compteur.com"
target="_blank">compteur</a></noscript>thx =D
-
Importing flash files (with sound!) can it be done?
Hi!
I sucessfully importing a flash file but im not sure if the sound has imported with it, does anyone know if I can import a flash file with sounds or do I have to import the sound seperatly?
HelenHelen,
After Effects can import .SWF files but unfortunately it does not recognize the audio in a .SWF file.
If it helps, AE can import .FLV files and it WILL recognize the audio in them.
Relevant Help page:
"Supported import formats"
-Troy -
How do I save stock footage as flash file with transparent background?
Hi
I have some stock footage of smoke on a black background (.mov format) that I would like to convert to a flash file with a transparent background, which I will be overlaying over a PNG image on a webpage.
I have managed to remove the black background in After Effects using a plugin called UnMult, but when I try to render as a FLV file in AE, even though I check the option to preserve the alpha channel and encode using the On2 VP6 codec, I still get a black background.
So I am wondering what else to try, whether it be with AE or Flash CS4. Is there a way of achieving this effect by directly importing the MOV file into Flash CS4 and removing the black background there, or do I have to use AE, and if so, how to achieve the effect I am looking for?
I would be grateful for any help in getting this together
Thanks
NickYou can put the video file in a movie clip and change it's
blending in the properties panel to multiply or screen.
Emil Georgiev - Flash and Web Design -
i have recently moved from the uk to australia and cancelled my uk debit before the payment was processed for songs i bought in itunes. i have tried to edit my billing info with australian debit details but the site says 'invalid card' how can i fix this?
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
Using subtitle SRT files with FLV files
Pretty much the way the summary states. Needs to embed srt
files with flv files in actionscript. Anyone know how?Ouw-wee! Photoshop 2 on System 6?
Do you have the files transferred to newer media or are they still on the System 6 Mac?
If they are still on the old Mac your options are limited, only diskettes worked on the old machines and SCSI hasn't been available on Macs in years..
Since Photoshop didn't have layers until PS 3.0, even if you get them open, they are single layers only.
Do you happen to know the file format they were saved as?
Good Luck!
Maybe you are looking for
-
Inbound IDoc not getting generated in XI System
Hi all, I have created a scenario following the given weblog: <b>/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements The first half of this scenario is working fine and the <b>idoc data is getting posted into
-
Kindly let me know in which resolution should i convert video for Nokia 5800 so that it can be viewed perfectly. e.g.: 320 x 240, 320 x 480, 320 x 200, 240 x 180. Also audio quality in what Kbps ? shouls i keep while converting. I had converted 1 vid
-
11g fails in Database Configuration Assistant with ORA-01919
I'm installing 11g on a 32-bit CentOS (redhat) box, and the Database Configuration Assistant is failing with ORA-01919: role 'XDBADMIN' does not exist I can in fact read, so I do know what's causing this particular error (and all the cascading errors
-
Is there any business content (or combination of inforproviders) that shows me outstanding debts by customer and the cost centre that the revenue has been credited to?
-
Suggestion on triggering file on event
Hi, I need suggestion on triggering files on each event.. scenario is like this: i need to trigger xml file on each event 1.501 GR posted,, 2.sales order created,, 3.confirmations for the production order 4.on cutting DO right now i have done program