Problems trying to re-install

I installed Itunes (Windows XP), downloaded a couple tracks. Went to download a 3rd and some file couldn't be found. Tried to repair still didn't work. Uninstalled and tried to download again. Got message that download would start automatically. Just sat there. What am I doing wrong? Can I not download again?
Regards
CB

Directions to find it are on the page with the installation instructions.
Locate the language and application you want to install and note its serial number (located to the right of the download links). The serial number is required during installation.
Note:The serial numbers included with your original CS2 applications do not work with these CS2 application versions.

Similar Messages

Help: problem trying to re-install 9iAS Infrastructure

I'm using Windows 2000.
A while ago I installed 9iAS Infrastructure, and later I deleted the entire installation.
Since then, I have changed my computer's name. Now, when I try to re-install the Infrastructure, I'm getting an error message which says that I must use the same user login to install the Infrastructure as I originally used. I'm getting this message even though I deleted all the files (that I'm aware of) associated with the original installation, so, clearly, my computer still has a "memory" of the deleted installation somewhere.
Can you please tell me which additional file or files I must delete from my system to destroy this trace of the original installation? Please note that I am using the same downloaded files now to try to perform the installation as I originally used.
Thank you for your assistance.
Hugh

Hugh, here's the info you wanted:
PURPOSE
This article describes the procedure how to manually perform the actions to
create a "clean machine" on Microsoft Windows 95/98/NT/2000/XP and how to
manually remove all Oracle components (e.g.: oracle RDBMS database server,
IAS, OEM, client installations, etc) and services from your computer.
SCOPE & APPLICATION
This article is intended for DBA's on the Microsoft Windows platform.
WARNING:
1. Remove all Oracle components from your computer only as a last resort,
and only if you want to remove ALL Oracle components from your system.
2. These instructions remove all Oracle components, services, and registry
entries from your computer. In addition, any database files in the
subdirectories under ORACLE_BASE\ORADATA\ are also removed.
3. These procedures will also remove Oracle network configuration files,
user written scripts and any other user generated files that may be stored
in Oracle_Base directories.
4. Exercise extreme care when removing registry entries. Removing incorrect
entries can severely compromise your computer.
MANUALLY REMOVING ALL ORACLE COMPONENTS AND SERVICES FROM YOUR COMPUTER
Section A (steps 1-6) describes the removal of all Oracle components on
Windows NT,2000 and XP.
Section B (steps 1-4) describes the removal of all Oracle components on
Windows 95 and Windows 98.
A. Removing Components on Windows NT/2000/XP.
To remove all Oracle components from a computer on Windows NT/2000/XP:
1. Check privileges:
1.a. Ensure you are logged in as a user with Administrator privileges.
2. Stop all Oracle services (if any are running):
2.a. NT: Choose Start > Settings > Control Panel > Services.
2000,XP: Right click My Computer > Manage > Services and Applications >
> Services
2.b. If any Oracle services (their names begin with Oracle) exist and have
the status Started, select the service and click Stop.
2.c. Click Close to exit the Services window.
2.d. Close the Control Panel/Computer Management window.
3. Remove the entries in the Windows registry:
3.a. Start the registry editor:
Choose Start > Run > regedit
Note: On Windows NT you can use regedt32 instead. The searching
capabilities of regedt32 is limited compared to regedit. It will be
needed to be able to edit 32-bit entries in the registry. Since we
are not going to update any 32-bit entry it is not needed.
3.b. Go to HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE
Note the value of the key INST_LOC, this is the location of the
Oracle Universal Installer (OUI). The default location is
C:\Program Files\Oracle\Inventory. If this value is different, make
note of it, so we can delete these files later.
Delete this ORACLE key.
3.c. Go to HKEY_LOCAL_MACHINE\SOFTWARE\ODBC and expand all subkeys and
remove all keys under here which are related with the
"Oracle ODBC Driver"
3.d. Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services and remove
all keys under here that begin with ORACLE or ORAWEB.
3.e. Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EventLog\...
...\Application and remove all keys under here that begin with ORACLE.
3.f. Go to HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\...
...\Uninstall and remove any entries related to Oracle.
3.g. Go to HKEY_CLASSES_ROOT, remove all keys that begin with Ora or ORCL
(e.g. Oracle..., ORADC..., ORAMMC..., OraOLE..., OraPerf... and ORCL...).
3.h. Close the registry.
4. Clean up the environment settings:
4.a. NT: Choose Start > Settings > Control Panel > System > Environment tab
2000,XP: Choose Start > Settings > Control Panel > System > Advanced tab >
Environment variables.
4.b. At "System Variables" click on the variable PATH in order to modify
the value. For example, you may see a path similar to this one:
C:\ORACLE\ORA81\BIN;C:\PROGRAM FILES\ORACLE\JRE\1.1.7\BIN
4.c. If an %ORACLE_HOME% was installed, remove this %ORACLE_HOME%\BIN path.
4.d. If JRE was installed by Oracle, remove the JRE path.
4.e. If there is a CLASSPATH variable under "System Variables", first make note
of the path defined, then delete it. This variable can be added back at
a later date if needed.
4.f. Check if there are any other Oracle variables set in "System Variables",
ORACLE_HOME, ORACLE_SID, TNS_ADMIN, JSERV or WV_GATEWAY_CFG. If these
exist, delete them also.
4.g. Click on APPLY and OK.
4.h. Close the Control Panel window.
5. Delete the software and icons:
5.a. NT: Choose Start > Programs > Windows NT Explorer.
2000,XP: Choose Start > Programs > Accessories > Windows Explorer.
5.b. NT: Go to %SystemDrive%\WINNT\PROFILES\ALL USERS\START MENU\PROGRAMS
2000,XP: Go to %SystemDrive%\DOCUMENTS AND SETTINGS\ALL USERS\...
...\START MENU\PROGRAMS
Note 1: These locations depend on whether OS was upgraded from NT, or
this was a fresh install of 2000/XP.
Note 2: To locate your System Drive, type in DOS-box: echo %SystemDrive%
and delete the following icons:
- Oracle Installation Products
- PRODUCT_NAME - HOME_NAME e.g.
Oracle for Windows NT - Dev6i
Oracle Reports 6i - Dev6i
Oracle Olap Client 2.2 - Dev6i
Oracle9i Lite
Oracle - OraHome92
5.c. Go to %SystemDrive%\Program Files\Oracle or the location of INST_LOC as
noted earlier in step 3.b. and delete this directory.
Note: In order to successfully delete all files, you may have to reboot
your computer first, in order to clear Operating System locks
on those files.
5.d. Go to the temporary directory and delete all files and directories in here
(see note in 5.c.).
NT: %SystemDrive%\Temp
2000,XP:
%SystemDrive%\Documents and Settings\<username>\Local Settings\Temp\
5.e. Go to the drive where the Oracle software is installed on your machine
and delete all ORACLE_BASE directories on your hard drive (see note in
5.c.).
5.f. Close the Windows Explorer / Windows NT Explorer.
6. Finish the removal:
6.a. Empty the recycle bin
Right click on recycle bin > Empty Recycle Bin.
6.b. Reboot your computer.
6.c. Optionally: If you are on Windows 2000 or XP run the System Defragmenter
utility:
- from Control Panel, select Administrative Tools > Computer Management
- expand Storage, then select Disk Defragmenter
- highlight each virtual drive, in turn, and click Defragment
- reboot your computer when finished.
B. Removing Components on Windows 95 or Windows 98.
To remove all Oracle components from a computer on Windows 95/Windows 98:
1. Remove the entries in the Windows registry:
1.a. Start the registry editor at the MS-DOS command prompt:
C:\> REGEDIT
1.b. Go to HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE
Note the value of the key INST_LOC, this is the location of the Oracle
Universal Installer. The default location is
C:\Program Files\Oracle\Inventory
If this value is different, make note of it, so we can delete these files
later. Delete this ORACLE key.
1.c. Go to HKEY_LOCAL_MACHINE\SOFTWARE\ODBC and expand all subkeys and
remove all keys under here which are related with the
"Oracle ODBC Driver".
1.d. Go to:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall
and remove any entries related to Oracle.
1.e. Go to HKEY_CLASSES_ROOT, remove all keys that begin with Ora or ORCL
(e.g. Oracle..., ORADC..., ORAMMC..., OraOLE..., OraPerf... and ORCL...).
1.f. Close the registry.
2. Clean up the environment settings:
2.a. Open your AUTOEXEC.BAT with an editor to modify the PATH variable.
For example, you may see a path similar to this one:
C:\ORACLE\ORA81\BIN;G:\PROGRAM FILES\ORACLE\JRE\1.1.7\BIN .
2.b. If an %ORACLE_HOME% was installed, remove this %ORACLE_HOME%\BIN path.
2.c. If there is a CLASSPATH variable set in the AUTOEXEC.BAT, first make note
of the path defined, then delete it. This variable can be added back at
a later date if needed.
2.d. If JRE was installed by Oracle, remove the JRE path.
2.e. Save the AUTOEXEC.BAT file and close the edit.
3. Delete the software and icons:
3.a. Choose Start > Programs > Windows Explorer.
3.b. Go to SYSTEM_DRIVE:\WINDOWS\START MENU\PROGRAMS
and delete the following icons:
- Oracle - HOME_NAME
where HOME_NAME is the previous Oracle home name.
- Oracle Installation Products
3.c. Go to SYSTEM_DRIVE:\Program Files\Oracle or the location of INST_LOC as
noted earlier in step 1.b and delete this directory.
3.d Go to SYSTEM_DRIVE:\Temp and delete all files and directories in here.
3.e. Go to the drive where the Oracle software is installed on your machine
and delete all ORACLE_BASE directories on your hard drive.
3.f. Remove any Oracle-related .INI files that may exist in the Windows
directory. The Windows directory may be found by entering
"echo %WINDIR%" from a command prompt.
Typical Oracle .INI files include ORADIM73.INI, ORADIM80.INI,
ORACLE.INI, ORAODBC.INI
3.g. Close the Windows Explorer.
4. Finish the removal:
4.a. Empty the recycle bin
Right click on recycle bin > Empty Recycle Bin
4.b. Reboot your computer.
RELATED DOCUMENTS
Oracle Installation Guides for Windows.
SEARCH WORDS
WIN95, WIN98, WINNT, WIN2000, Windows95, Windows98, WindowsNT, Windows2000,
de-install, deinstall, re-install, reinstall
Copyright (c) 1995,2000 Oracle Corporation. All Rights Reserved. Legal Notices and Terms of Use.

Trying backup and install software version 7.0 Bundle 2416

I can't help but have the same problem trying backup and install software version 7.0 Bundle 2416?   Anyone got any ideas - my 9900 is now completely unusable and is stuck on "Backing Up Your Data"!!

Hi and Welcome to the Community!
RIM is constantly changing, due to many many reasons (some of which are licensing), the compatible PIMs for the Desktop Software. I've no idea what prior version supported CardScan, but the current KB regarding compatibility is here:
KB12268Applications supported by BlackBerry Desktop Software for Windows for synchronization
You can find some older versions of the Desktop Software in this archive:
http://www.blackberryforums.com/rim-software/253387-archived-rim-desktop-software.html#post1744114
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Trying to re-install Skype

HELP. I'm having problems trying to re-install Skype on my Asus tablet. I keep getting an error showing '-24'

Your device is Android-based. The install error (-24) you are having is somewhat common on Android devices and can happen to any program, not just Skype. From the Android FAQ thread. You are experiencing problem #2.
http://community.skype.com/t5/Android/Frequently-asked-Android-questions-Answers/td-p/211358
The below is the simplest solution next to obtaining root access to the tablet and hunting down the equivalent of leftover/stray files/settings to fix the error.
2) "Insufficient available space" during installation
This is actually a bug in Android itself due to not all files being removed after uninstalling. Try restarting your device, e.g. switch off and on again. Afterwards retry installation from Android Market. If that did not help try resetting your device to factory settings.

Problem trying to install XP via Boot Camp, computer almost died

Hi there,
I just recently purchased a 24" 2.8Ghz intel iMac 500GB harddrive with OS X 10.5.2. I plugged everything together yesterday morning and the computer was going fine, just liek a dream. On a side note I was genuinely impressed with the ease of setting up and how quick, intuitive and reliable the mac and OS X Leopard was.
This is a bit long but I think I need to go into detail what happened in order for any of you to fully understand what happened to my mac.
Later in the afternoon I decided to install Win XP via Boot Camp. I knew that XP SP2 or later and VISTA was recommended but I decided to use my XP Home Edition "2002 version" install disc instead.
I opened up the Boot Camp Assistant, partitioned 15GB of the 500GB harddrive, inserted WinXP install disc and the computer restarted with everything going to plan thus far. I was going through the install process as normal but I came to a window asking which partition to use to install XP ("c" or "d") or if I wanted to create another partition. I also had my iPod still connected to the computer and I think the installation recognised that harddrive too (all 12GB of space left on my iPod). I wasn't sure what to do so I decided to quit the install process by pressing the relevent keys ("press F3 to quit" etc). Upon automatically restarting the computer I first came to a white screen for about1 or so minutes and then a black screen came up with white text asking me to "press any key to 'something' the CD" (can't remember what the rest of the text was), but the keyboard was unresponsive. I turned the computer off and unplugged it as according to the instruction manual that came with the mac, waited the suggested 5-6 seconds, turned it back on but I came across the same screens. I couldn't eject the XP install disc either. I restarted the computer again, held down the eject button whilst restarting, the disc thankfully ejected but I then came across the same black screen but with no text, just a white flashing underscore cursor. I decided to remove my iPod and restart the computer again. AGAIN I came across the same white screen, then black screen with the flashing white underscore cursor and unresponsive keyboard. I decided to insert the OS X install disc 1 (I don't remember if I inserted it whilst at the black screen or if I restarted the computer and THEN inserted the OS X install disc). The disc loaded slowly but I eventually went through the install process (choosing your language) and then came across a window asking me "Where would you like to install OS X?" but I couldn't install it anywhere. I opened "disk utility" or some program with the word "disk" in it, had no idea what I was doing, somehow created a new volume (though I thought I was actually erasing the XP partition I set up earlier) but in MS-DOS FAT Format or something. I then was able to choose a place (or volume) to install OS X but I had to change the format of the untitled volume from FAT to something along the lines of "Mac OS X journaled (enabled)" (whatever that means). There were other format options available but I just chose the top one on the list (Mac OS X journaled (enabled)). I then made a full install of OS X 10.5.2 and late last night downloaded the latest pdate for Leopard (10.5.4) along with other updates. The computer is working fine now thankfully andeverything seems to be back to normal.
I just want to know what actually happened. What did happen to my computer? Did I somehow wipe the harddrive? Why didn't the computer reboot to HDD when I ejected the WinXP install disc? Which format is the HDD formatted to? What does "Mac OS X journaled (enabled)" mean? Also how come my HDD is 500GB whereas when I checked Boot Camp Asistant a second time (but not installing Win XP again) My HDD is 460GB with 440GB of available space? Is there still another partition I am unable to see? Is there an extra 40GB of data floating around the harddrive that I'm unaware of? What are the factory settings for my computer? I really hope I haven't formatted the disk and installed the OS to settings that weren't like how the computer was originally set BEFORE I regrettably tried to install WinXP via Boot Camp.
If anyone could respond or give me some sort of advice, explanation or help I would very much appreciate your assistance.
Cheers.

According to wiki "the documentation from Apple states that Windows XP Service Pack 2 or Windows Vista is requisite for a Boot Camp installation, and it also mentions that trying to install an unsupported operating system could prevent the computer from booting even into Mac OS X". Sure that was from wiki, but it does seem to support and somewhat validate the problem I had with installing an earlier edition of XP.
http://en.wikipedia.org/wiki/BootCamp_%28software%29#Other_operatingsystems
Thanks for the info on the Filesystem info. My problem is that installing OS X on a mac is just a little bit more technical than installing Windows on a PC as there are a few more things to consider. Plus I'm not familiar with any of the utility programs as well. It's a **** miracle I managed to somehow create a volume to install OS X on when I thought I was erasing the partition I created for WinXP.
But I'm still not sure about the missing 40GB from my 500GB HDD. Upon coming to the desktop straight after OS X was fully re-installed I noticed that the HDD only had 460GB and that 440GB of it available space. So the full installation of OS X was 20GB, but where has the other 40GB gone? I swear I saw that I had much more available space on my harddrive (BEFORE I tried to partition my HDD under Boot Camp Assistant and stuffing up the computer). Is the missing 40GB from the ORIGINAL FACTORY INSTALL of OS X INCLUDING all my iTunes music and other files I uploaded to the computer earlier? It would make sense but there's no way, as far as I know, of checking this. Any ideas?
Cheers.

Hi im having huge problems trying to install flash for my mac 10.5 imac, iv gone through the internet and tried all of the solutions, everytime i try to install flash it says cant read the download file, or it just wont install, anybody plz help!

hi im having huge problems trying to install flash for my mac 10.5 imac, iv gone through the internet and tried all of the solutions, everytime i try to install flash it says cant read the download file, or it just wont install, anybody plz help!
iv unistalled flash, iv checked plug ins it just wont work,

It would have been a great help to know precisely what Mac you have, so some of the following may not apply:
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version,10.3.183.23 or later, is for Intel Macs only running Tiger or Leopard, as Adobe no longer support the PPC platform. Version 11.4.402.265 or later is for Snow Leopard onwards.
(If you are running Mavericks: After years of fighting malware and exploits facilitated through Adobe's Flash Player, the company is taking advantage of Apple's new App Sandbox feature to restrict malicious code from running outside of Safari in OS X Mavericks.)
* Unhelpfully, if you want the last version for PPC (G4 or G5) Macs, you need to go here: http://kb2.adobe.com/cps/142/tn_14266.html and scroll down to 'Archived Versions/Older Archives'. Flash Player 10.1.102.64 is the one you download. More information here: http://kb2.adobe.com/cps/838/cpsid_83808.html
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications (including Safari) first before installing. You must also carry out a permission repair after installing anything from Adobe.
After installing, reboot your Mac and relaunch Safari, then in Safari Preferences/Security enable ‘Allow Plugins’. If you are running 10.6.8 or later:
When you have installed the latest version of Flash, relaunch Safari and test.
If you're getting a "blocked plug-in" error, then in System Preferences… ▹ Flash Player ▹ Advanced
click Check Now. Quit and relaunch your browser.
You can also try these illustrated instructions from C F McBlob to perform a full "clean install", which will resolve the "Blocked Plug-in" message when trying to update via the GUI updater from Adobe.
Use the FULL installer for 12.0.0.44: Flash Player 12 (Mac OS X)
And the instructons are here: Snow Leopard Clean Install.pdf
(If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, try the following solution which fools the site into thinking that you are running the version 11.5.502.55:)
Download this http://scriptogr.am/nordkril/post/adobe-flash-11.5-for-powerpc to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.

I have a problem with Imovie. Just brought an macbook 15 retina , iLife install and Imovie was working. I than did a data migration from my old macbook pro and now it crashes on start up. I tried to re-install from app store but no option to re-install

I have a problem with Imovie. Just brought an macbook 15 retina , iLife install and Imovie was working. I than did a data migration from my old macbook pro and now it crashes on start up. I tried to re-install from app store but no option to re-install, just installed and it greyed out.

Well, my two-month-old MBP has no qualms about booting from a no-name external USB HD I put together...
Given that is is a common point of failure, I would imagine a large Apple Store should keep a stock of HD's on hand.
Now since you're a bit desperate and the genie pops up til Saturday and you seem to be the enterprising kind, let's try an experiment: if you have room enough in the external HD and assuming it isn't a Time Machine volume, why don't you plug it in, stick the Install CD and see if the installer lets you select the external drive as the install target. If you can install Leopard on it, on top of the backup without reformatting, and the Mac can boot from the drive afterwards, at least you would have some functionality restored and would be able to pull your stuff from the internal HD. Apple says booting from USB drives is not supported but that does not equate to not possible; some brands do work. Risks? Always. You can always lose your backup. Like I said, a challenge for an enterprising gal....
Next time around, consider having a bootable external clone at hand for rainy days. I keep three myself...
P.S. Since I'll be in the Dallas-FW area in late June, I can volunteer with the confetti....

HT203687 Trying to install iCloud on a new Toshiba laptop so I can sync with my iPad and iPhone. I get error message HRRESULT:OX8007OBC9, says the installer encountered errors before iCloud Control Panel 2.0 could be installed. Same problem trying to inst

Trying to instll iCloud on a new Toshiba laptop so I can sync contacts, calendars, email with my iPhone and iPad. Get error message HRRESULT:OX8007OBC9, says installer encountered errors before iCloud Control Panel 2.0 could be configured. Have the same problem trying to istall iTunes.

Quote from: lcwhitlock on 04-April-14, 13:44:09
Hello darkhawk,
Thank you for the recommendation. I somewhat understand what a MS DOS disk is, but I'm not sure how to go about creating one. I've seen where you can use a program, like Rufus, to create a usb one - but I'm leery about using 3rd-party programs (especially ones I'm not familiar with). I've come across a couple of 'how-to' tuts, but they didn't clarify what files (if any) I would need to include on the disk (for my particular situation). Right now I don't have any blank cds, nor any extra flash/thumb drives - wish I did, but hadn't needed these for years. There has only been one other time where I needed to re-install Windows, but that was over 15 years ago - I did it through BIOS, reformatting my drives, and then reinstalled via the Windows XP disk. Windows 8 is an entirely different breed, which has left me feeling a bit stumped, at times. If there was a way I could perform it (successfully), similar to the first time I did it years ago, I'd give it a try - but at the same time, I'm a bit reluctant, because if it doesn't work, then I'm stuck without any internet access to get further help.
Ask and ye shall receive. This should be doable in Windows 7 and Windows 8 on another PC. I recommend using a USB Flash drive like in this tutorial, but I'm sure you could use something else.
If you want, you could also use Hiren's BootCD to make a bootable CD with many options and programs on it (I keep one, just for certain situations) that will allow you to do the same things.
http://www.hiren.info/pages/bootcd
Also very useful for sorting out virus's as long as it's downloaded and made on another PC that is virus free......

Getting same error message - 1st time ever having a problem witn iTunes. Tried to re-install iTunes but that just got another error message. Does this mean I have lost everything.

Getting same error message - 1st time ever having a problem witn iTunes. Tried to re-install iTunes but that just got another error message. Does this mean I have lost everything.

Have a look at the articles mentioned here:http://support.apple.com/kb/TS3694
Unknown Error containing "0xE" when restoring: To resolve this issue, follow the steps in iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. See iTunes for Windows: Issues syncing iOS devices with P55 and related Intel Chipsets for more information.

I'm trying to re-install an earlier version of a third party app I bought from App Store, version is not available anymore. The problem, 3rd party does not recognize my purchase ID, since I got it from App Store.

I'm trying to re-install an earlier version of a third party app I bought from App Store, version is not available anymore. The problem, 3rd party does not recognize my purchase ID, since I got it from App Store. My Mac Air Book is limited to update up to OS 10.6.8, unaware of updating the new version of Mac Cleanse I bought from App Store, this new version does not support my OS 10.6. How can the App Store provide me with an earlier version of Mc Cleanse?
Thanks,
jerson

It can't. That app is now lost to you.

I tried to update mavericks 10.9 to os x yosemite but unfortunately it is was unsuccesfull. it was no any back up before i update. so, here now is the problem i try to install back the mavericks as per apple says, but reinstalling fails,

i tried to update mavericks 10.9 to os x yosemite but unfortunately it is was unsuccesfull. it was no any back up before i update. so, here now is the problem i try to install back the mavericks but the computer say "it could not find installation information of this machine or the request timed out"
what should i do?
pls help me.
os x mavericks 10.9 macbook air

Try re-indexing Spotlight.
Spotlight – Re-index

Jabber for Windows - periodically tries to re-install and fails

Jabber 9.1
CUCM 7.1.3
Windows 7 32 bit
Cisco Presence 8.0.2.10000-30
Jabber for windows - periodically tries to re-install and fails. After install Jabber works for awhile but then when trying to open another program(Outlook, IE Explorer) it tries to re-install. If I go to the directory where the install files are and do repair it works. This seems like a conflict with another application.
I see this in the Windows application event log:
Detection of product '{4EB9D7DD-65B5-44ED-B877-CE3EF9B4530F}', feature 'Cisco_Jabber_Files', component '{7CB949BE-2270-4992-9C4C-8FDDB90F6FE2}' failed. The resource 'C:\Program Files\Cisco Systems\Cisco Jabber\JabberMeeting\DesktopShare\atgpcdec.dll' does not exist.
Jabber 9.1
CUCM 7.1.3
Windows 7 32 bit
Cisco Presence 8.0.2.10000-30

Hi,
Do you have WebEx Productivity plugin installed on the machine? I can reproduce this problem after exiting Jabber, creating a One-click meeting from Outlook and restarting Jabber. Please provide further information to help me open a defect.
- What was the version of Jabber on this machine prior to 9.1.0?
- What is the version of the WebEx productivity tool plugin (if it is installed)?
- Is there a particular sequence that you can follow to reproduce it everytime?
Thanks,
Maqsood

I am having a problem with Windows Fusion installed on a MacBook.

I am having a problem with Windows Fusion installed on a MacBook OS 10. When attempting to use a Browser, (either IE, or Chrome), under Windows Fusion, I cannot browse to ANY page except Gmail.com.
I checked all security settings, and found no problem. Neither browser will allow me to do ANYTHING other than go to Gmail.com!!!
I am not sure if I have some virus on my Windows side, because Google and Safari both work perfectly on my Apple side, just not when running Windows Fusion.
Is there some setting I am missing, or do you think I have malware/virus issues?? My Internet connection is DEFINITELY working fine - I can send, receive, open, and close all my email on Gmail only, and can navigate freely on Gmail, but cannot get to any other site even hyperlinked to Gmail.
Any help would be greatly appreciated.
Thank you very much.

HartEJ wrote:
...Neither browser will allow me to do ANYTHING other than go to Gmail.com!!!...
If you've already tried my previous suggestions, it may be that something has tampered with the DNS settings in your Windows VM, which might bypass the settings your Mac uses. Assuming you're using Windows 8, these instructions explain how to check and change the DNS settings. There's also a link in those instructions listing a variety of suggested DNS settings. If you do try changing the settings, record what the settings currently are in case you want to return to them.

MAC Mouse and Keyboard Do Not Work, when I am trying to re-install the OS using "Command R" option

I am trying to re-install MAC OS 10.8.2, but when I hold "command R" I am asked for the firmware password, but the keyboard and mouse do not work.
If I only select "option" during the boot up process it will ask me for the firmware password, keyboard and mouse work, but I can only select the HD option.
Can someone advise what is the problem here, and your resolution.
I have tried different commands "option + command + R' with no luck.

I tried what was provided on the link, but it is not working.
I hold it down, before the gray screen and the chime, but it only prompts but the firmware password.
I tried based on the specific order in the support document and at a random press and hold.
No go any other thoughts?

Since updating yesterday iTunes will not open/sync/recongnize my iPhone. No error messages, ive tryed un/re-installing it but the same thing occurs.. Anyone! Please can you Help? Thank-you

HELP!! my iTunes will not respond to connection via usb, it does not reconize it or sync it, no purchased, wont re-charge etc, when it used to work Yesterday
and i did an update... ive tryed un/re-install and its the same problem... how ever on my other computer its fine...... Please HELP !! Thank-you

Hey!
Glad to hear that you and your family made it through relatively unscathed! I think we all need to take better care of our wonderful planet, because I think we are upsetting Mother Nature!
I have the Windows Installer Clean-Up screen up and tried to upload a screen cap for you, but IE immediately shuts down every time I try. So I'll have to transcribe the screen for you:
I see the following:
(All Users)
(All Users) [1.2.0.10]
Those are the top two lines. The following lines after that are programs he has installed on the machine like Acrobat, Adobe, Autodesk Inventor, and such and they all have a name and program number in brackets.
And I now again have the obligatory Apple programs installed and listed again:
(All Users) Apple Application Support [1.5.1]
(All Users) Apple Mobile Device Support [3.4.0.25]
(All Users) Apple Software Update [2.1.2.120]
(All Users) Bonjour [2.0.5.0]
Please note that iTunes is NOT LISTED.
Everything else 'appears' to be normal, I'd say.
Take care, and I'll see you on the flipside! According to my clock, it's 4:11am Thursday morning there!
See ya!
- Austin

Problems trying to re-install

Similar Messages

Maybe you are looking for