Problems trying to upload video and movies to the internet

We are trying to upload a movie that we have made on imovie recently to a website on the internet, however I am not able to upload the movie. I keep getting a message that I need a codec. I only have quicktime player 7.4.1 (v14). Should I get quicktime Pro or is there someway I can do this without having to purchase the upgrade

What version of iMovie?
What QuickTime codecs did you use for the export?
QuickTime Pro doesn't add any other codecs found in the "free" version.

Similar Messages

Hello..Does anyone in this community know what the following error code indicates   0x8002006E   I was trying to burn a DVD from files in a burn folder. They were pictures from my Nikon camera. I can play videos and movies from the same dvd player.

I was trying to burn a DVD from files in a burn folder. They were pictures from my Nikon camera. I can play videos and movies from the same dvd player.    Thanks for any help you can offer,

Thanks for your reply:
I did find an error log related to the error code and tried all suggestions on the list of recommendations, still no luck
I definitely am running OS X10.5.8 (hopefully will be updating later on this month)
I tried several brand new discs from the same box, still no luck.
My last option is to go out and try a different brand, guess I'll go with Verbatim this time but I think I'll poke around some more before buying 20 more new discs.

Firefox is slow to open and close. I get a "script error" that says it may be caused by a recently opened tab. What do I do to correct this problem. It is wreaking havoc when trying to open/close or move around the internet.

I am getting a "script error" when I close out the internet, specifically Firefox. My backup internet explorer does not do this. This is slowing down the process of opening/closing Firefox. When I open Mozilla, I get "restore session" even though I have closed everything down. I have "removed program" and re-downloaded Mozilla 3 times and still this problem persists. What is causing it and how do I fix it?

-> Update All your Firefox Plugins
* https://www.mozilla.org/en-US/plugincheck/
* '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''
* Restart Firefox
Check and tell if its working.

Loading videos and movies onto the fifth generation ipod

I would like to load my ipod with movies and other videos. These videos are already stored on my computer's hard disk. Have you got any suggestions?

Yeah... Your best bet is that the videos you are trying to import are in a format unrecognized by iTunes, since iTunes uses QuickTime to play video media you will have to convert your video so it will be recognized by quick time..http://www.apple.com/quicktime/player/specs.html (see specifications at bottom of link page.) After you have converted the videos you should have no problem importing them in to iTunes, with the steps we discussed above.
Regards--- jgurbisz

Can I present a keynote file with video and audio over the internet? If so how?

I have tried this with Adobe Connect but it' not ideal since the frame rates drop dramatically and there is no sound. I can upload powerpoint files directly to Adobe connect but there is no option to upload Keynote files. I know I can export Keynote fiels to power point but this work-around is ugly.
-Idotel

Keynote takes over complete control of the graphics system to play the presentation, therefore the display that is not showing the presentation will be black.
The only time the monitor not showing the presentation can show video, is when using Presenter Diisplay in Keynote.

What accessories do I need to watch videos and movies on my Samsung flat screen TV from my iPad model MD511 C/A?

I want to play videos and movies from the Apps on my iPad with iOS 6.1.2 on my Samsung HD TV, what cables etc. do I need?

Depends on what input options you have on your TV.
If your TV has DVI in then you need a MiniDisplay Port to DVI Adapter.
If your TV does not have DVI in but has HDMI then you need a MiniDisplay Port to HDMI Adapter with Audio Support.

I am trying to import video and the audio doesn't upload with the video. Help.

I am trying to import video and the audio doesn't upload with the video. Help.
I upgraded to iMovie 11 because the previous version wouldn't read the type of video I was importing (VOB). The video imports but not the audio, what do I do?

What are you capturing from? You may not hear the auido as it's captured but it will be there. After it's captured can you see the audio waveforms? Do the audio meters move when you play the clip? If so then go to "View" then "Audio Playback" and set it to 'Built-in Output" if you're monitoring audio through the computer.

My desktop IMac OSX 10.6.8 : IMovie '11: Trying to upload a home movie clip from my Panosonic camera model PV-DV203D. I've had this camera several years, and used it with Windows desktop. Now trying to work with my Mac. I have a USB cable, both ends fit,

My desktop IMac OSX 10.6.8 : IMovie '11: Trying to upload a home movie clip from my Panosonic camera model PV-DV203D. I've had this camera several years, and used it with Windows desktop. Now trying to work with my Mac. I have a USB cable, both ends fit, but iMovie '11 does not recognize it. Is there a driver fix for this?

What kind of Mac to you have? This camera is a tape based DV one that connects best with firewire and I cannot tell if your Mac has firewire. If your mac *does* have firewire, get a camcorder firewire cable and try again.
ETA: Oops, I am pretty sure that all the "desktop iMacs" have firewire, so you should be good to go. You will probably need a cord that goes from FW800 to your camcorder.

I have moved my file from my old computer. Now that I am trying to play songs and movies iTunes says the original file could not be found. How do I reverse this problem?

I have moved my file from my old computer. Now that I am trying to play songs and movies iTunes says the original file could not be found. How do I reverse this problem?

Put the files back where iTunes expects them to be.

Premiere Elements 13 issue with the mouse on When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip rom the mouse. The clip follows my mouse movements and goes to other places in my

Premiere Elements 13 issue with the mouse on MAC OSX Yosemite 10.10.1
When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip from the mouse.
The clip follows my mouse movements and goes to other places in my time line.
I try to delete these extra insertions, but the mouse will not release the clip.
Action I’ve taken: I’ve re-installed Premiere Elements 13. Problem remains.
This issue has consumed too much of my time and does not go away. It ruins my video.
Help please.
Thanks

I tried using the Guest Account on my Mac. In the Guest Account, Illustrator works perfect!
Then I started wondering what processes (tools/tweaks) I run by default on my account. Turned out the problem was called by a little background tool called RightZoom. RightZoom let's the green 'zoom' button always maximize your current window.
So thanks! Problem solved!

Re post: Editing-- Insert video and move audio, preserving sync

Forgive me, a newbie, for posting this twice, but I think the iM6 group folks, not the iM8 folks, may have the a clue about this issue.
I really love iM6. I do have FCExp, but I've gotten so comfortable with iM6 that I hate to change. But I am frustrated by one thing.
I may be trying to do something too advanced for iMovie (6HD) but almost everything else with this product is so amazing, I can't imagine that they didn't build this in. I must be overlooking something.
I am making dvds from a VHS conversion of some 60-70s 8mm home movies. A labor of love for an aging parent. The amateur filmmaker used to project them with records playing, and at some point he collected all his chosen LP music onto a cassette (not on the video cassette, a music only cassette). So, I play the VHS and the music at the same time and use an analog to Firewire converter and load all into iM6. So far so good. Then, because I need to seriously mess with the music to put it more or less in sync with the video segments, I extract the audio so it now shows up as a second track. Still no problem. Now in editing I clip or split the audio into separate pieces and checkerboard them, alternating between the two audio tracks in the timeline so I can adjust volumes, cross fade, etc.
The first volume I did took a lot of twiddling and tweaking to keep all the clips in their proper places. I'd work at the end of the piece, then at the beginning then back to the end with the result that the audio clips were always sliding out of position. I can't quite figure out how to keep two audio tracks in sync with the video. BUT I did finally finish and when I started the next one, I swore that I'd always finish a segment and then move on to the next, always left to right, never tweaking the finished stuff to the left (earlier on the time line). This has made the job much easier but I have one big problem now. I did not think to put some black at the head of the project to put the titles on!
You'd think I could just put the cursor at 0:00 and insert a 6 second title over black and it would move all the video and audio to the right by six seconds. But what happens is only the video slides over. The two audio tracks don't move and are now six seconds early. Sure, I could go ahead and re-adjust all the 30 or 40 audio clips, but I can't help thinking that "Apple wouldn't make me do this..."
Has anyone any idea how to lock all the edited material together so I could insert some space to the left without losing sync?
PS does anyone share my frustration on THIS: when I copy a little piece of sound from one of those tracks and then paste the copy, there's no telling where it will land... It never goes to the cursor position. If I'm lucky it lands somewhere on the timeline after the project end and I can drag it back to where I want it. But on an hour project this is annoying.

I think I solved my own problem, and Klaus, you were correct, Lock to Play head is the key.
In order to select ALL the clips on both tracks you click and drag a box across all the clips you want to lock and then select Advanced/Lock Audio Clip at Playhead and all the clips will be locked to their video positions, though in my case only a few of them sprouted little yellow pushpins. I was then able to slug 6 seconds of Black in ahead of my video, and voila!, both video and attached audio moved over staying in sync. I knew Apple wouldn't let me down, though the answer was not explicit in any Apple documentation. I guess I'd better buy the book now.

Editing-- Insert video and move audio over preserving sync

I really love iM6. I do have FCExp, but I've gotten so comefortable with iM6 that I hate to change. But I am frustrated by one thing.
I may be trying to do something too advanced for iMovie (6HD) but almost everything else with this product is so amazing, I can't imagine that they didn't build this in. I must be overlooking something.
I am making dvds from a VHS conversion of some 60-70s 8mm home movies. A labor of love for an aging parent. The amateur filmmaker used to project them with records playing, and at some point he collected all his chosen LP music onto a cassette (not on the video cassette, a music only cassette). So, I play the VHS and the music at the same time and use an analog to Firewire converter and load all into iM6. So far so good. Then, because I need to seriously mess with the music to put it more or less in sync with the video segments, I extract the audio so it now shows up as a second track. Still no problem. Now in editing I clip or split the audio into separate pieces and checkerboard them, alternating between the two audio tracks in the timeline so I can adjust volumes, cross fade, etc.
The first volume I did took a lot of twiddling and tweaking to keep all the clips in their proper places. I'd work at the end of the piece, then at the beginning then back to the end with the result that the audio clips were always sliding out of position. I can't quite figure out how to keep two audio tracks in sync with the video. BUT I did finally finish and when I started the next one, I swore that I'd always finish a segment and then move on to the next, always left to right, never tweaking the finished stuff to the left (earlier on the time line). This has made the job much easier but I have one big problem now. I did not think to put some black at the head of the project to put the titles on!
You'd think I could just put the cursor at 0:00 and insert a 6 second title over black and it would move all the video and audio to the right by six seconds. But what happens is only the video slides over. The two audio tracks don't move and are now six seconds early. Sure, I could go ahead and re-adjust all the 30 or 40 audio clips, but I can't help thinking that "Apple wouldn't make me do this..."
Has anyone any idea how to lock all the edited material together so I could insert some space to the left without losing sync?
PS does anyone share my frustration on THIS: when I copy a little piece of sound from one of those tracks and then paste the copy, there's no telling where it will land... It never goes to the cursor position. If I'm lucky it lands somewhere on the timeline after the project end and I can drag it back to where I want it. But on an hour project this is annoying.

Hmmm. this was supposed to go to the iM6HD group. I wonder if there's a way to move it.

Unable to upload videos and songs in my ipad classic160

I have ipod classic160gb, Past one month before I have uplaoded all video and songs from my computer, after installing new itunes i can't upload videos and songs, previously i am using "Add to folder to library" after that i can see all videos in itunes movie list but now it won't display, iam very disappointed, please help
Thanks

Previously everything is working fine, after installing new Itune problem happen. I am using same file so incompatible issues won't come, can you please mention folder path for[Music and Movies category in your iTunes library on your PC]. One thing ,suppose i am importing 'movies' folder from my F directory after importing can see one extra folder inside that 'movie' folder "Automatically add to Itunes"
Thank you for reply

Videora-Music Video and Movies

I'm frustrated!!!
I downloaded and converted several music videos and movies on Videora Converter and now I don't know how to transfer them to my Ipod... I've tried to upload them from Ipod and that didn't work either. Please help...

Just use iTunes to import them. Load up iTunes and click on "File", then scroll down to "Import". Browse to where your movie file is and click on it to import it. After this, you will need to resync your iPod in order to get the movie onto it.

How to transfer or copy video and movie onto iphone 4s? through itune cant.

how to transfer or copy video and movie onto iphone 4s? through itune cant. I tried.

See this Discussion...
https://discussions.apple.com/message/17442206#17442206

Problems trying to upload video and movies to the internet

Similar Messages

Maybe you are looking for