Problems under Windows USB Drivers (Apple Wired Keyboard)

Hello guys,
somehow I have some issues after installing Windows 7 regarding the USB Drivers: if I install the "Intel(R) 7 Series/C216 Chipset Family USB 3.0 eXtensible Host Controller Installation Disk - 1E31"-drivers, doesn't matter if I do it from Intel's or Apple's webpage, the USB Ports of my Apple Wired Keyboard (A1243) don't work anymore; it says "Not enough power". I have already tried that workaround found on the web, by increasing the output mAh through regedit, but the point is that after installing these drivers, the section "Power Management" isn't shown anymore in the device manager.
I'm having a Macbook Pro Late 2012 with Retina display

Just an idea for you. There is an entire Apple Discussion forum dedicated to Boot Camp and Windows.
Whereas, not everyone here with an Intel iMac has installed, tried to install or has experience with BC & Windows, everyone there has or at least has an interest. You may attract help more quickly there.
The Forums are at the bottom of the main Apple Discussions page under Windows Compatible Technology. Here is a link;
Boot Camp: Installation and Storage

Similar Messages

Problem with ALT codes on Apple Wired Keyboard

May I just note, I have posted this in the "Boot Camp" forum, but run the normal Windows 7 on my computer. I was unable to find a forum purely for Apple hardware.
I am using a Apple Wired Keyboard (MB110B/B) -- British-bought -- on a Windows 7 PC, and I are having some issues with ALT codes. The array of symbols I have to type (pi, sigma, etc) becomes tiresome to insert via the Character Map (on Win7). Basically, entering "alt" (left handside) then 227 does not insert "π" but rather "Ò". alt + 228 (Σ) inserts õ
I don't know if this problem is common for Apple keyboard users on Windows, but is there a way to alter this.
Thanks, Jordan.

For a third opinion, be cautious of using a dishwasher as the temperature can get pretty high. If the spill is on the 456 on the number pad, you can try holding the keyboard vertically, soak just that part in distilled water for several minutes to disolve the spill material. Run some denatured (rubbing) alcohol over the numpad, then dry with a hair dryer.
You could also try to remove the key caps...slip dental floss under the key caps in two loops, one from the top one from the bottom. Pull the key caps off one at a time, the wipe the area clean...see if there is any material sticking that needs to be cleaned off.
I do not know what keyboard you have or how it does the switching, but most keyboards today do not use mechanical switches. The switches are sealed capacitance switches so if you clean all the material from the keyboard it may work again.
Or, if you don't feel like going to this much trouble, a visit to your friendly Apple Retailer to purchase a new one may be a good idea.

Apple wired keyboard freezing/delaying on Windows 7

Hi there,
First post here!
I bought an Apple Wired Keyboard last week for my PC running W7 Ultimate, Worked fine before, but over the last 2-3 days, It has been delaying inputs, Not doing what I tell it to do, Or repeating an input so I get a stream of the same letter or spaces, Or it deletes everything I have written.
I synced my iPod Touch 32GB 3G yesterday, and the keyboard was almost unusable!
I'm wondering if it is a faulty product, or just something that comes with having it on windows.
It's been a challenge writing this!
Hope you can help!

Hey, I have this same problem. I think it's something to do with Win7 not being able to manage the fact that this keyboard is also a 2-port USB hub. I've found other people with similar logitech keyboards who can't use them in Windows 7.
Sad, because this keyboard worked beautifully in windows XP, and is now almost unusable in 7.
You find any solutions? I'm surprised no one else has had this problem, but I guess there aren't a ton of people buying apple accessories for Windows PCs.
I'm about to go buy a cheap old USB keyboard and use that, but kind hoping it won't be necessary. I thought there might be a way to disable the USB ports on the keyboard, but it doesn't seem possible.

Will any usb extender work with my apple wired keyboard?

I'm about to buy a apple wired keyboard with the numeric keypad on ebay. I don't have an apple USB extender but I do have a normal usb extender that came with my old pc wifi dongle. Will this work with the apple keyboard? I've tried googleing but I've gotten many mixed answers, some saying yes some saying no.

Yes, a USB extension cable with a male and female end will work.
example: Amazon.com: Belkin USB Extension Cable (10-Feet): Electronics

IPod, iTunes Syncing on Leopard + Apple Wired Keyboard = Hang and problems

Sorry for the cryptic topic title but I search liked crazy and through several different sites I managed to hobble together a configuration that reproduces my problem. Maybe those terms will helps others...
Anyway, I have Mac Pro with OS X 10.5 (Leopard) and a 5G video iPod. Just recently during iTunes syncing it began to randomly hang quite early on in the process. No itunes is still responsive but it just stays on the same song forever, never making any progress. I did restore, auto vs. manual, disk space enable/disable every combination of iTunes and iPod settings I could try.
The crazy part is that I HAVE fixed the problem but I wanted Apple and others to know what to do and that is needs to be fixed correctly
Recently (same time iTunes started failing) I got the new Apple wired keyboard (love it!) but it IS the problem (or rather the combination of stuff). If I just unplug that keyboard during the iTunes sync it works every time, plug it back in and it hangs again next time iTunes syncs.
So maybe someone else is having this problem, I hope you find this forum and I hope Apple already knows about this glitch.
Thanks!

I'm only going to tackle one of your issues; that of "recently added" playlists being whacked out when added to iPhones/iPods.
Here's the issue: You set up a smart playlist with a "recently added" criterion. The playlist looks fine in iTunes, and it displays all the recent music you've added to your library properly.
You then sync to your iPhone, and low and behold, all the tracks in that playlist do not match anything that had shown in iTunes. Believe it or not, this is a really old iTune bug. If memory serves me, it goes back to iTunes 6 or maybe earlier.
There are two known work arounds:
1) you turn off "live updating." This is very poor work around, because most people use a recently added playlist to automagically add their newest music to their device. Turning live updating off defeats the point.
2)create a second smart playlist that points to the first one. What I mean is, if you have a playlist called "Newest 250 tracks" and that is the smart playlist that shows up incorrectly on your iphone, then set up a second smart playlist called "Newest 250 tracks iPhone" and the only criterion in it, is that is populates from playlist "Newest 250 tracks." It will then look identical to your first playlist, but because it doesn't contain a "recently added" criterion in itself, it will avoid the bug. So sync to that second tiered playlist, and all is well.
Yes it's stupid to have to make a second "meta" playlist for every recently added playlist, but c'est la vie.

I got a external Apple Wired Keyboard (w/ NumPad), caps lock mapped to control doesn't work with tab + caps lock + shift

I got a external Apple Wired Keyboard (w/ NumPad) since I'm a developer. I have used control panel > keyboard > modifier keys to make the caps lock key the control key. I can't get it to work when I press caps lock (which maps to control) +shift + tab (which I use to change tabs backwards).
Any ideas? It works when I use the regular control key, and it works on my built-in MBPro keyboard. Thx!

Hi Steve, Welcome to apple discussions.
Hmm, that is a strange problem. Well, you've already done what I would suggest which is to go to the keyboard settings and click the "Restore defaults" button in the modifier keys window and try again. If that doesn't work then you can restart the computer and check. If that doesn't work you can try to reset the pram. Hold the optioncommand+PR buttons after you hear the startup chime, it should chime again, I let it chime a third time just for good measure and see if things look better.
If that fails then you can try making another account and seeing if the caps lock works in the new account. There might be some strange error on your account that would be corrected for in a new account. After that it gets more labor intensive. Do a system re-install, do an erase and install.
You might consider a trip to the apple genius bar there in Honolulu if can. The should be able to run through all that for you. You're still under warrantee so take advantage and get some help.
Oh, and just a disclaimer that I learned from Adam on the maccast podcast. Make a full, complete backup including a time machine and bootable (like superduper or carbon copy cloner) disk before you do any of the above or take the unit it for service.
Hope this helps.
John

Apple Wired Keyboard Gibberish

I guess this problem has never been solved but i thought i would let people know I'm having this problem to see if anybody has found a fix for it. I am using a MacBook Pro Retina (mid 2012) running Yosemite 10.10. When i use the wired keyboard a s d f g h j k l looks like å ß ∂ ƒ ˙ ∆ ˚ ¬ . I have tried just about everything i can think of besides buying a new keyboard and seeing if it is the keyboard itself. Anybody else have a similar problem or possibly a fix. DO NOT tell me to try another computer, make sure the USB ports are working, try a windows PC, try a different Mac, reset the SMC or PRAM, check fonts for duplicates. It does the same thing on a mac mini, and in windows it acts like control or alt is being held down. One would think that would make it like the keyboard is at fault, but at one point in time tonight during my adventures on learning how to troubleshoot a APPLE keyboard on an APPLE computer it worked about 80% except for several keys would type two letters when one was pressed. b = bn . Im out of ideas besides buying a new keyboard and crossing my fingers.

work special functions keys on apple wired keyboard with windows 7?

Connecting iPhone to Apple Wired Keyboard

Hello,
I pluged my iPhone 5 to my Apple wired Keyboard in one of the two USB slots that it has under neath. Is there a way to type on your iPhone using this method. If so what settings does it consist of to make it work.
Thanks,
Rosko

Hi I am glad I stumble upon this thread. Specifically what blue tooth keyboard? Does it have to be made by apple? I saw a blue tooth keyboard from amazon and it was manufactured by minisuit. Will it work for my iphone? Please let me know. Thank you so much.

Apple Wired Keyboard Causing Bootcamp Boot Freeze

Hello everyone,
I discovered a very serious issue with my late 2009 21.5" iMac. Whenever I would attempt to boot to my Bootcamp partition, the system would freeze on the selection screen. After months of trying various things, including a complete reformat of the drive, I have found that the issue is being caused by the fact that my Apple wired keyboard is plugged into a USB port. I have found a workaround, which is to set the Bootcamp partition as primary and unplug the keyboard before the system boots, but this is a very large pain in the neck. Can anyone suggest a fix?
Thank you in advance for any help!

Yes. It started out as an intermittent issue. A few reboots generally got Bootcamp to start. But it became worse over time. I deleted and reinstalled Bootcamp/Windows several times before this. Last week the issue came up again. I tried deleting the Bootcamp partition/reinstalling Windows again, but this time it would hang during the installation process. I went so far as to reformat my whole drive, but that did not resolve the issue either. All this took place over the course of several months, off and on. I dont use Bootcamp very often.
Thank you for the suggestion! I'll check it out.

Apple (wired) keyboard stopped working

Hi everyone,
I bought a 2.8 GHz Quad-Core Intel Xeon "Nehalem" processor Mac Pro (model MC560LL/A) in April, 2011.
1 year and one month later (after the warranty expired, natch), the apple wired keyboard (MB110LL/B) that came with the computer stopped working. No stuck keys or repeating characters, just stopped working altogether.
I didn't drop the keyboard, or spill anything on it. As a matter of fact, I kept the keyboard clean with a cover. I tried the keyboard in every USB port, no dice. I've rebuilt permissions and zapped the PRAM, still no dice. I'm stuck using the clickety-clackety black keyboard from my G4.
Has anyone else had this problem?
Since it's been one month (and 2 weeks) out of warranty, should I still try to get Apple to replace it?
Thanks in advance for any help.
p.s.- OS 10.6.8

OK, it looks like Christmas came early.
I called Apple (and spoke to a WONDERFUL service agent named Hannah), and she agreed to send me a replacement keyboard at no charge, even though the warranty on my non-working keyboard expired 38 days prior.
I was wanting to replace the wired keyboard that I have with another wired keyboard, because of the numeric pad. Unfortunately, Hannah informed me that Apple no longer sells the wired ones and that I would be getting a wireless keyboard as replacement. Bummer.
I ended up buying a new wired one, because I really need the numeric pad. I'll have to send the wireless one back. I feel awful that the good will was wasted. At least I left a glowing review for her and suggested that she get a raise!

Apple wired keyboard not identified by new mac mini running mavericks

Ayone having this problem? Started when I upgraded to Mavericks.

I've experiened this exact problem with two different MBA mid-2011 (one 11", one 13"), both of them upgraded to Mavericks. We use Apple Thunderbolt displays, which are supposed to attach all your USB devices attached to the monitor hub on reattachment of the power (1st) and thunderbolt cable (2nd). This all worked as-designed until the upgrade to Mavericks. since then, the Apple wired keyboard will NOT detect on the USB host when attachments are wired up. Instead, we must reach around the back of the monitor and unplug the keyboard, wait a few seconds, then reinsert it back to the same (or different) port.
Of interest, both the wired mouse and the wired superdrive have no issues whatsoever, even though they're plugged into the same hub (the Thunderbolt monitor) as the keyboard.
There are numerous open discussions about this on these forums, both with Thunderbolt monitor-to-laptop rigs and iMacs, and none of them have one iota of input from any Apple representative in some official capacity, leading me to believe only one plausible conclusion (a) They know about this problem, and (b) they have absolutely no idea how to fix it.

What are the dimensions of the Apple wired keyboard?

What are the dimensions of the Apple wired keyboard?

K1
I am constantly amazed at our beloved Apple!
Not only lack of info, but SysReqs seem a bit restrictive? How can a plain ol' USB keyboard require OSX10.6 or better, yet NOT support USB3.0 AND require some Apple software driver update? [sound of exasperation -> sigh]
best as always
CCC

Apple wired keyboard - certain keys not working with shift

I treated myself to a new Apple wired keyboard MB110B/A for my mac mini.
My previous keyboard worked fine, however the new keyboard causes the computer to enter the Hardware Test mode every time the computer is restarted. The computer only starts normally without the keyboard connected (or with my old keyboard connected).
Once the computer has started, if I plug the new keyboard in, it appears to work normally with the following exceptions. The following keys do not register when the "shift" key is pressed: 2, w, s, x. This fault does not occur with my old keyboard.
As these keys are in a line, I think there may be a wiring fault inside the keyboard. If so, would this explain the computer entering Hardware Test mode every time it is started with the keyboard connected?
Thanks in advance.

Definitely sounds like a hardware fault in the keyboard to me. I assume it's the same whichever USB port it's connected to? (and if you plug it into another Mac, too)?
Of course, as that keyboard is glued together in final assembly, it's completely unrepairable.
If it's a reproducible fault (and new anyway): take/send it back for replacement. You shouldn't have any trouble with Apple arguing.

Can i Use The Apple Wired Keyboard With Camera Connector Kit

Can i Use The Apple Wired Keyboard With Camera Connector Kit
3g 64gb verizon

People report it is still possible to use a wired USB keyboard with the CCK, if you use a powered USB hub to get around the "not enough power" error message. (I have done this with an older Apple USB keyboard my non-jailbroken iPad1 on iOS 4.3.3.) Normally, powered USB hubs have a AC power adapter so you lose portability unless you can find a battery powered USB hub. At this point, the (in)convinience of the USB hub becomes an issue, depending on what you get.
And wired USB keyboard were never supported for the iPad. So there's no guarantee that it will continue to work with future iPad updates from Apple. So best to go with a Bluetooth keyboard unless you have a specific USB keyboard that you "must" use. If you have all the equipment already, I say give it a try. But I would not recommend trying a USB keyboard if you have to purchase anything.

Yostemite kills Apple wired keyboard

After upgrading our school iMac suite to Yosemite I've discovered several stations no longer detect the Apple wired keyboard. 10.10.1 is installed on every machine. We have 5 Mid 2011 models and 15 Late 2012 models. The issue seems pretty random, appearing on any model, and seems to happen after the device goes to sleep but fails to wake up (instead a black backlight screen is visible). I've repaired disk permissions and verified the disk, using another USB keyboard to boot into Recovery mode on troublesome machines. I've noticed a few other complaints within the community about the same thing but their fixes don't work. Has anybody else experienced this this and figured out a fix? I've attempted swapping keyboards with different machines but it makes no difference.

Hello limavadyhigh,
It may help to reset the SMC and PRAM of the affected machines.
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
Reset your computer’s PRAM
http://support.apple.com/kb/HT1379
Cheers,
Allen

Problems under Windows USB Drivers (Apple Wired Keyboard)

Similar Messages

Maybe you are looking for