Problems updating iPhone 3GS from 3.0.1

I have read numerous other posts on this topic, but they have not helped me. Whenever I connect my iPhone to my Mac, I am prompted to update the iPhone software, but this has failed repeatedly, with err=-3259. I have tried connecting the Mac to my wireless router with an ethernet cable, and have also tried turning off the firewall. I have no specific antivirus software installed to turn off. I have tried restoring my iPhone, but this also fails, as the iPhone software update is "timed out" with the same error message. Any ideas, anyone?

That's because Apple is no longer signing v3.1.3 nor any firmware other than iOS4.  You could try following a downgrade to v3.1.3, see these:
http://discussions.apple.com/search.jspa?threadID=&q=Downgrade+iPhone&objID=c201 &dateRange=last30days&userID=&numResults=30&rankBy=10001
This guide works for 3G but not 3GS, though there are some suggestions for 3GS users in there:
http://m.lifehacker.com/5572003/how-to-downgrade-your-iphone-3g%5Bs%5D-from-ios- 4-to-ios-313

Similar Messages

  • HT4623 i had a problem when i update iphone 3gs from ios 5.1.1 to 6.1. How could i fix it?

    i had a problem when i update iphone 3gs from ios 5.1.1 to 6.1. How could i fix it?. I can active my phone?help me, please!

    Well we need to know what your problem is if you want someone to offer a solution for you

  • My updated iPhone 3GS from 4.2.1 to 6.0.1 is stuck in restore mode

    Hi,
    I've got a problem with my iPhone 3GS, which is stuck in restore mode.
    I've done theses steps :
    Update iTunes to the last version on my Windows7
    Connect my iphone and synchronize for the first time
    Manually backup my data with iTunes (more than 4000 pictures, messages, ...)
    Accept to download and update to iOS 6.0.2 from iTunes
    iTunes backup my data once again and starts the iOS update
    When my iPhone is updated, restore process starts and craches with an "Error -10" message.
    The iPhone is fully functional but completely empty. I check this page - http://support.apple.com/kb/HT4946 but can't find my backup.
    If I check this path \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\ or use iTunes to find backups, the only are made by itunes with iOS 6. Old backupswith iOS 4.2.1 have disappeared.
    How can I retsore my iphone ?
    Regards
    gr

    Hi,
    Any ideas ?
    Thx
    gr

  • Problem updating iphone 3gs help

    just tried updating my iphone 3gs it was interrupted and now the phone screen has locked saying "setting language" and none of the buttons are working
    my computer is not recognizing it either.. help would be appreciated

    Hi tobster99,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at this article:
    iOS: Unable to update or restore
    http://support.apple.com/kb/ht1808
    When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup.
    Best of luck,
    Mario

  • TS1538 Problems updating iphone 3gs software.

    I am attempting to update the software on my iphone 3gs but when i click "check for updates" on itunes, it tells me that my current software (4.2.1) is up to date! Please help, it's very frustrating as I can't even use the facebook app! I am clueless about most things apple so have no idea what avenues to explore to sort it out.
    Thanks Jess.

    If you have a recent backup of your phone (meaning you sync regularly) after you restore the phone you can restore that backup.

  • How to update iphone 3gs from ios 4.1 to latest available version?

    Hi
    My daughter has bought a 3gs which is currently running 4.1. Can it be updated any further and how would she do this? when the phone is plugged into iTunes and we click the update button is just says iTunes is running the latest version and doesn't update the phone.
    Can anyone help please?
    Many thanks
    Jen

    Upgrading iOS
       1. How to update your iPhone, iPad, or iPod Touch
       2. iPhone Support
       3. iPod Touch Support
       4. iPad Support
         a. Updating Your iOS to Version 6.0.x from iOS 5
              Tap Settings > General > Software Update
         If an update is available there will be an active Update button. If you are current,
         then you will see a gray screen with a message saying your are up to date.
         b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
         c. Resolving update problems
            1. iOS - Unable to update or restore
            2. iOS- Resolving update and restore alert messages

  • Hello, migration to iCloud is impossible because updating iPhone 3GS from v 3.1.2 to v 5.0 fails

    Hello,
    Here is my configuration
    iPhone 3 GS 16 Go, iOS v 3.1.2
    Airbook Mac OS X v10.6.8
    MobileMe account since 2009
    (all in French)
    Here is the problem
    I am trying to migrate from MobileMe to iCloud. Several trials to update the iPhone with iTunes to v5 however failed. Safeguarding iPhone content takes > 6 hours and blocks at about 10 %. Syncing iPhone and Mac is no problem. Thank you very much in advance for your help.
    Best
    Agricola Lepre

    Hello Boris,
    >> It implies that I can do an export of my app from the old env (Application Builder -> Export Application) and import it into my new env (Application Builder -> Import Application) and expect everything to work. Is my understanding correct?
    Your understanding is almost correct. APEX application is not only the “source code” of the application, which you get upon exporting the application from your original APEX engine. You also need all the supporting objects of the application, on the database level – tables, sequences, stored procedures, and every other database resources your application is using. Those will not be included in the APEX application export file.
    After you duplicate the APEX database environment (like the schema that was associated with the APEX workspace), you can import the application, and it all should work just fine.
    Regards,
    Arie.

  • HT4623 updating iphone 3gs from version 4.2 to higher

    Hi
    I have a iphone which has not been connected to the internet for a year and is on version 4 software but i cant seem to update it to a better version as most of my apps dont work on version 4
    Thanks

    This is the "ordernumber" it means it is a 3G indeed, not the 3Gs, and the 3G max iOS is 4.2.1.
    It can only updated via the computer iTunes.

  • Problem updating Iphone 3gs to ios5

    Hello.
    I have a serious problem. Yesterday, Itunes requested to update my phone to IOS5 (My Iphone was working perfectly on the older version of IOS)
    Updater got stuck on the recover part for an hour until I recieved an error.  " Iphone could not be restored. Unknown error (14)."
    On my phone's screen it wants me to plug it into itunes. Itunes says "ITunes has detected an Iphone in recovery mode.
    IPhone software must be restored before it can be used with iTunes"
    I try to restore it and same problem occurs. Any ideas? I've noticed some people are facing problems with ios5 update also.
    Thanks already for help!

    See Here
    Backup and Set Up as New Device
    http://support.apple.com/kb/HT4137

  • Problem updating iPhone 4 from 4.3.2 to 4.3.3

    I am trying to update the firmware to 4.3.3 but iTunes keep on sending me error (3194, 21 and etc.) Now my phone stuck on recovery mde and I cannot do anything on it.. I even tried to restore the firmware back to 4.3.2, but still it sending me error message... PLEASE HELP!!!!!!

    Here is the Error:
    C:\Documents and Settings\agoyal\My Documents\Downloads>fixrecovery43.exe
    Initializing libpois0n
    ERROR: The process "iTunes.exe" not found.
    ERROR: The process "iTunesHelper.exe" not found.
    Waiting for device to enter DFU mode
    Found device in DFU mode
    Checking if device is compatible with this jailbreak
    Checking the device type
    Identified device as iPhone2,1
    Preparing to upload limera1n exploit
    Resetting device counters
    Sending chunk headers
    Sending exploit payload
    Sending fake data
    Exploit sent
    Reconnecting to device
    Waiting 2 seconds for the device to pop up...
    Preparing to upload iBSS
    Checking if iBSS.n88ap already exists
    Preparing to fetch DFU image from Apple's servers
    Fetching Firmware/dfu/iBSS.n88ap.RELEASE.dfu...
    [==================================================] 100.0%
    Uploading iBSS.n88ap to device
    [==================================================] 100.0%
    Reconnecting to device
    Waiting 10 seconds for the device to pop up...
    Preparing to upload iBSS payload
    Loaded payload for iBSS on n88ap
    Resetting device counters
    Unable to find device
    Unable to upload iBSS payload
    Unable to upload iBSS payload
    Exiting libpois0n

  • Updated iphone 3gs from 3.1 to 5.0.1 it wont activate :( HELP ME!

    it was jailbroken before also and i bought a sim card and i live in doha,qatar i used QTEL sim card but still doesnt work :( HELLLLLP!

    Nothing you can do.
    Discussion of jailbroken devices/jailbreaking is forbidden here.
    Updating the iOS version will revert the device back to the carrier locked status it was originally built for.
    Only an official unlock from the carrier will survive an iOS update.

  • HT201407 i Perform this , but stil problem occur, could not activate, what can i do. it say server is temporary unavialable. Actually i update my iphone 3gs from 4.1 to 6.1.3 ...   What can i do, reply iam waiting for answer.

    i Perform this , but stil problem occur, could not activate, what can i do. it say server is temporary unavialable. Actually i update my iphone 3gs from 4.1 to 6.1.3 ...   What can i do, reply iam waiting for answer.

    Is your phone jailbroken by any chance?

  • TS3694 I tried to update my iphone 3gs from ios 5 to 6 but because of software crash and while restoring with ios 6 it is not activated. Now I degrade it in ios 4 and can not use any app. How can I update this iphone?

    I tried to update my iphone 3gs from ios 5 to 6 but because of software crash and while restoring with ios 6 it is not activated. Now I degrade it in ios 4 and can not use any app. How can I update this iphone?

    Downgrading the iOS is not supported, and likely has caused the problems you are experiencing.
    You'll need to go elsewhere for support.

  • I've updated my iphone 3gs from iOS 5 to iOS 6 and now I can't access the internet on 3g, can anybody help??

    I've updated my iphone 3gs from iOS 5 to iOS 6 and now I can't access the internet on 3g, can anybody help??

    I don't follow your instructions... mine goes Settings->General->Cellular and from there it's just on/off options for Cellular Data, Enable 3G, Data Roaming, etc. Or I could go Settings->General->Profile APN Carrier Settings but when I click that it just shows as verified but no Visual Voice APN or MMS Settings. If I click More Details it goes to Signing Certificate which has a bunch of parameters for unlockit.co.nz but I am unable to change anything.
    I just updated my iphone 3GS to IOS 6 and my internet (wifi and 3G), voice and text all work, but the only thing I can't do is send/receive pictures via text message. I am using At&t prepaid sim. I tried turning off the phone completely but I'm trying to avoid a complete restore.. at least until I can understand the problem better! Any help would be appreciated!
    Thank you!

  • HT4623 I update my iphone 3gs from 4.1 to iOs 6.1 but after I update it says you need to activate your phone. I can't activate it thru itunes or wifi.

    I update my iphone 3gs from 4.1 to iOs 6.1 but after I update it says you need to activate your phone. I can't activate it thru itunes or wifi.

    @Onlymanu and @ Easy Now - Google may provide some
    direction. Discussion of jaibroken iPhones is prohibited per
    Terms of Use for this forum.
    Unauthorized modification of iOS
    http://support.apple.com/kb/HT3743

Maybe you are looking for

  • Error while importing the epa file..help needed urgently..

    Hi, I am facing a severe problem, I have developed a portal application, designed the pages, iViews roles etc and exported to a file and later downloaded the epa file. For testing purpose, I deleted my content folder of the pages and iViews from the

  • Audio suddenly dose not work!! PLEASE HELP

    I just tried to watch a youtube video and there was no audio. I tried some other things which should have sound, no sound.... I tried raising and lowering the audio level (didn't even play the little poppy sounds for each level of audio change) but s

  • HT2623 how do i delete my icloud email aliases?

    how do I delete my icloud and "me email aliases addressess Cheers Paul

  • CS3 crash on exit

    For those of you who have been experiencing AICS3 crashing (not responding) upon exiting, check if you have Microsoft's Intellipoint mouse driver 6.1 installed. Uninstall the driver (control panel applet). WinXP will revert to the basic mouse driver

  • BT126S_APPT- Addition ObjecID field in Activity Search Result View

    Hello, In Activity Search result page, I want to show Object ID of the transaction as well. Below are the component details. Component : BT126S_APPT View: ApptSR In the available fields of the this view, Object ID is not available. Appreciate if some