Problems upgrading from standalone to CC Lightroom

Hi all.
I had a standalone license for Lightroom 5 but subscribed to the Photographer's Bundle to get Photoshop & LR5. When I first installed it I had a couple of issues but since then it has all been fine. However, today my CC Desktop was telling me LR was not installed, even though it obviously was. I removed LR and reinstalled via CC. That's where the problems began. Trying to open the CC version I was just getting "the catalog could not be opened due to an unexpected error". I could not create a new blank catalog at this point to try alternatives, nor open my current catalog. I have now removed the CC version and put back the other version and my current catalog loads just fine. Now CC says LR is Up to Date even though it's on 5.6 not 5.7 and there's no other way to update it.
Anyone any idea what the problem might be?
OS X Yosemite
LR 5.6

All your settings and data is save and will carry over.
If you update to LR 6 (CC 2015) the installer is the same for both versions and you can decide later if you want to license as stand-alone or subscribe to a CC plan.

Similar Messages

  • I am having problems launching the standalone version of Lightroom 6 after I have gone through the install and activation process? Lightroom starts to open but "hangs" before any photos in the catalgue are displayed. I have contacted the chat support twic

    I am having problems launching the standalone version of Lightroom 6 after I have gone through the install and activation process? Lightroom starts to open but "hangs" before any photos in the catalgue are displayed. I have contacted the chat support twice but they have not been able to fix the problem.

    I went through the activation process yesterday and shut down my PC when I went to bed last evening. When I got up this morning and turned my PC on and then started Lightrom 6 (I upgraded from version 5) it started to launch but then just hung and became "not responsive". I I then uninstalled and then reinstalled the product today but the same thing happened. What is weird is that when I install from the standalone file I downloaded when I purchased the upgrade it looks like it's downloading the software again over the Internet? I have been having these problems for the last four or five days. I have contacted the chat support folks twice and they were able to get it working but whatever they did did not last as the problem reappeared again once the PC was shut down and then started up again.

  • Problems upgrading from OS 8.1 to OS 9.2.2

    Thank you for any help you can give me.
    I have some additional problems upgrading from OS 8.1 to OS 9.2.2.
    1. The keyboard is typing symbols, not normal letters. When I go to Key Caps it shows symbols and not normal letters. When I was running OS 8.1 the keyboard typed fine.
    2. I also am have trouble with windows closing as I open new windows. Everytime I click to open a new folder the old folder closes.
    3. Copying files. When I drag a file it makes a new copy on the desktop.
    How did I goof up going from OS 8.1 directly to OS 9.2.2?
    All these problems were fine while running under OS 8.1.
    I believe this computer came with OS.8.6 installed on it but I got it with OS 8.1.
    Any help you can pass on to me would be greatly appreciated.
    I am typing this on my Dell PC.
    Thanks a million,
    Jim
    iMac G3 333   Mac OS 9.2.x  

    Easy, I just insert my OS 8.1 System Software into the tray loading CD and choose it as the start up disk in the control panel. I restart the computer and it is running off of OS 8.1 instead on OS 9.2.2. I looked for another keyboard today at a used computer store but they didn't have one for the iMac. I need to find one as all my research indicates that it is somehow connected to the option key. But then again everything works fine under OS 8.1. Quite a puzzle to me. Again thanks for the page tip on Firmware. Jim - PS, I did pick up a zip drive that connects to USB ports.
    iMac G3 333   Mac OS 9.2.x  

  • I'm having problems upgrading from 10.6.8 to Yosemite.  My computer locks up after the download and installation process.  Does anyone know how I can overcome this problem?

    I'm having problems upgrading from 10.6.8 to Yosemite. My computer locks up after the download and installation process. Does anyone know how I can overcome this problem?

    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

  • I am trying to chose an upgrade from iPhoto to either lightroom or photoshop elements 10

    I am trying to chose an upgrade from iphoto to either lightroom or photoshope elements 10, and would appreciate any comments/advice
    Thanks for your time
    Sandy

    Elements and LIghtroom are different categories of app. Elements is a pretty straight up editor. Lightroom is database driven photo manager with lossless processing. Simply, Lightoom would be the upgrade to iPhoto.
    That said, there is no upgrade path from iPhoto to these apps. You will need to export from iPhoto to the Finder - a process that means you will lose something of the work you have done in iPhoto already.
    If your reason for upgrading is to add editing power then you can use Elements as an extenral editor to iPhoto:
    You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.
    If the Limitation you see in iPhoto is primarily photo managment then have a look at Aperture. Half the price of Lightroom, much better manager, complete with OS integration.
    If you're shooting Raw then Lightroom or Aperture are the way to go.
    You can set Elements as an external editor in either.

  • Will i have problem upgrading from Snow Leopard 10.6.8 to Maverick ?

    will i have problem upgrading from Snow Leopard 10.6.8 to Maverick ?

    Impossible to know. But I would make a backup before doing so, just in case. I would also do the following:
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    If you wish to save yourself a lot time should you need to reinstall Mavericks at some point in the future then see the following:
    Make Your Own Mavericks, Mountain/Lion Installer
    After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
       2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
    Open Disk Utility in your Utilities folder.
    After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
    Click on the Erase tab in the DU main window.
    Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
    Make your own Mavericks flash drive installer using the Mavericks tool:
    You can also create a Mavericks flash drive installer via the Terminal. Mavericks has its own built-in installer maker you use via the Terminal:
    You will need a freshly partitioned and formatted USB flash drive with at least 8GBs. Leave the name of the flash drive at the system default, "Untitled." Do not change this name. Open the Terminal in the Utilities folder. Copy this entire command line after the prompt in the Terminal's window:
         sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume
         /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
    Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen so be careful to enter it correctly. Press RETURN, again.
    Wait for the process to complete which will take quite some time. When completed it would be wise to test the installer by checking that it boots the computer and is then ready for installation.

  • Help with upgrading from Photoshop Elements to Lightroom 3

    Any tutorials/books/best practices on upgrading from PSE to LR 3? I have thousands and thousands of photos in PSE, and I'm sure the upgrade is not as transparent and smooth as Adobe promotes it to be.
    Any suggestion, advice or past experience will be greatly appreciated.

    here is a set of instructions on doing what you want.
    Randy
    Playnwmadness
    Home / Using Photoshop Lightroom 3 / Importing photos
    Import photos from Photoshop Elements
    Was this helpful?YesNo
    Lightroom detects if your computer has a Photoshop Elements catalog and can import photos and data from the PSE catalog into a new Lightroom catalog. Lightroom imports photos and data from Photoshop Elements 6 and later on Windows. Lightroom imports photos and data from Photoshop Elements 9 on Mac OS.
    Note: For help troubleshooting errors or problems when importing PSE catalogs into Lightroom, see the Adobe Support article Lightroom 3 cannot upgrade Photoshop Elements catalogs (cpsid_85517).
    In the Library module, choose File > Upgrade Photoshop Elements Catalog.The Upgrade Photoshop Elements Catalog dialog box displays the most recently opened Photoshop Elements 6 (PSE6), Photoshop Elements 7 (PSE7), or Photoshop Elements 8 (PSE8), or Photoshop Elements 9 (PSE9) catalog.
    To choose a different PSE catalog, click the Photoshop Elements drop-down menu.
    To change the destination of the new Lightroom catalog, click Change and navigate to a different folder.
    Click Upgrade to import the PSE catalog into a new Lightroom catalog.

  • Problems upgrading from Dreamweaver 4 to CS3

    The website I manage is www.episcopal-dallas.org. Today, I
    upgraded from Dreamweaver 4 to CS3. In Design view, I can edit
    about half of the pages, but those of the other half (including the
    index/home page) have gray backgrounds (with a few exceptions that
    have white), and, although I can make changes in the code, I cannot
    edit them in Design view. The cursor forms the universal "nicht"
    sign — circle with a diagonal slash through it. I can't find
    any commonality between the ones that I can edit and the ones I
    can't.
    Also, on some of the pages, the navigation panel that is
    supposed to be on the left side has ended up above the text of the
    main body of the page. Manuals I have say nothing about upgrading
    existing websites.

    > Apparently, DW4 didn't make
    > the pages conform to the templates
    Of course it does.
    > unless you detach them from each other.
    You should never have to do this.
    I hope your understanding of this doesn't cause further
    problems for you.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "jeanie-wtlbh" <[email protected]> wrote in
    message
    news:g1q4h7$38v$[email protected]..
    > Turns out the problem is with the templates. When I
    detach the webpages
    > from
    > the templates, I am able to edit them. I am managing a
    site that was
    > designed a
    > couple of years before me (hence Dreamweaver 4).
    Apparently, DW4 didn't
    > make
    > the pages conform to the templates, which CS3 does,
    unless you detach them
    > from
    > each other. The templates for my website haven't been
    upgraded for years.
    > So,
    > most dion't match up. I'm so relieved to have finally
    have figured this
    > out. I
    > have had to learn most of Dreamweaver "by the seat of my
    pants."
    >

  • Problems upgrading from 10.2.8 to 10.3.9

    I'm having trouble upgrading from 10.2.8 to 10.3.9.. The first install CD won't boot, I get a grey screen and no "blue OS X sign" it just stays grey.. And here is briefly the history of what happened to get me to this point..
    This problem is on an iMac (summer 2000, the one with a slot loader). We (my wife's Mac) got it used and it was running OS 9.0.4 (She) wanted to run 10 and picked up 10.1 on ebay and installed it.. No problems there as 10.1 came with a boatload of system CDs including Classic 9.2.2.
    Then, after awhile and seeing 10.1 was too old for various software on peripherial devices.. I had some Jag 10.2 CDs lying around and we installed that and did a 10.2.8 upgrade.. Now it's time to install 10.3.9 and when it wouldn't install, a friend told us it was a firmware update problem.. Okay I went to the firmware update page for this iMac model and read the instructions.. But one caveat was in order to install a firmware update on an iMac which came with OS 9.0.4 at least 9.1 has to be installed to complete the update.
    Here's the tricky part , and it may sound really weird, but please bare with me; my wife had originally partitioned the 10GB HDD into 3 partitions and 9.2.2 was on one of them.. Sofar so good. I installed 10.2 and then an upgrade to 10.2.8. Then recently she told me that she had DELETED 9.2.2 and intended to install 10.3 on that partition and run 10.2 on the other one.... so she repartitioned the HD into 2 partitions.. with 10.2 on disk 1 and leaving disk 2 completely empty.. So, whew, when we tried to upgrade to 10.3 and nothing happened I thought this may be the cause of the problem.. A missing system.
    I tried in vain to reinstall 9 from the original CDs (by holding down the "C" key) and when I tried to install it the finder coudn't find a volume to install it on. All there was on the screen was the CD icon..
    Maybe I should've done the firmware upgrade before we installed 10.1.. But I didn't know I had to.. So, in anycase, it's now next to impossible to GO BACK to the starting line and reinstall 9.0.4 and do a reworking of the upgrades to 9.1 and 9.2 so I can properly do the firmware update and finally go the distance and install 10.3.9!
    Is everyone confused yet? If not any helpful advice to get me out of this mess would be helpful.
    Rob

    cornellius your post was *Very Helpful.
    I have the installation CDs for 9.0.4, 9.2.2, 10.1 and 10.2..
    I booted from the 9 CD and went to Disk Set Up and "initialised" the HD which placed a HD icon on the desktop. That resulted in a restoration of 9.0.4.. But I can't download the update, my DSL modem won't work with OS 9 minimum is 10.2. A little thing I forgot. Then I installed 9.2 since you can only do online firmware updates from 9.1 or higher.. I assume higher means 9.2.2.
    I read on this support's firmware update page that if you boot from OS X (10.1 or 10.2?) and go to the menu and Disk Utilities on the installer CD you can get firmware updates there.. I booted from 10.1 and could not see how to do that. But, as you suggested, I can "Erase Disk" and "Install OS 9 Drivers," i.e., "Classic" (check box) and go from there.. I can do this with 10.2 as well.. Same procedure same result.. 10.2 will be installed with 9.2.2 running in the background.
    But whether the firmware updates happen I'm not sure. As I stated above, this iMac had gone through two OS X upgrades, 10.1 then 10.2 and as I said somehow the Classic partition, 9.2.2, was deleted making it impossible to start up from OS 9. But I know once Classic is reinstalled with 10.2, I can do the firmware update.. and eventually install Panther.. Panther is a minimum requirement for iSale and, increasingly, other Mac software and the wife bought iSale to organize her ebay auctions.. so Panther it is.
    Well this sounds like a hurry and wait or wake up and go to sleep situation.. Larry, Moe and Curly couldn't do a better job than I'm doing..
    Thanks for your help,
    Rob

  • Problem upgrading from snow leopard 10.6.8 to mountain lion. Damaged partition.

    Hi, here's my problem: I can't install ML and I can't go back to SL.
    This is the story:
    - trying to install ML on my iMac SL 10.6.8  >  error: HDD is damaged and can't be repaired.
    - trying to start up from original SL install disk  to return to the original state >  error: the contents of this disk can't be changed
    - trying to start up from 'start up disk HD osx 10.6.8'  >  error: you can't change the start up disk, start up disk couldn't gather enough information.
    - trying to start up in safe mode  >  the grey screen with the apple appears but nothing happens except that the computer runs warm.
    - using disk utilities:
         -- first aid: verify disk: error: disc needs to be repaired. Click repair disk.  //  (but the repair disk button stays grey and can't be clicked.)
         -- restore: when opening the time machine back up there are just files, no disk images or something like that.
         -- erase: error: couldn't unmount the disk.  //  (probably because you can't erase a partition you are already using).
    That about sums it up. All this is leaving me with a useless iMac.
    We can't have that, can we?
    Please help. Thanks.

    Thanks Walter.
    I just solved the problem myself. Here's what I did:
    I used the 10.6.8 install disk to start the computer, in disk utilities I unmounted the partition with my OS ( HD MacIntosh ). Then I could erase the partition (I have up to date back ups of my files). After that I could install 10.6.8 again. After it is installed completely and I have run the apple software update I expect that installing ML won't be a problem anymore.
    I advise anyone encountering the same problems to have a look at the posts in this community concerning the upgrade from snow leapard to lion because the same problems, and a lot of them, occured with this. Which, I think, is a sad thing.
    Minus points for Apple.

  • Problem upgrading from Photoshop CS2 to CS4 Extended

    I purchased the retail box Photoshop CS4 Extended Upgrade (Windows) from a retail store ($349.99 + tax). I am upgrading from Photoshop CS2 and this is the version that the Adobe website says to purchase for this upgrade path. The problem is that CS4 doesn't see my installed, working, activated, and registered CS2 installation so it brings up the next screen offering to allow me to install it as a trial version OR list my qualifying product and serial number. The way that it offers to let me enter my qualifying product is via a drop down box with a single entry of CS3 Extended. No way of entering my CS2 there and it doesn't like my CS2 serial number entered with a CS3 product being shown there (says it isn't a valid CS3 serial number...of course it isn't). Does anyone know how to get this thing to install? Adobe tech support is gone until Monday and then I'll be at work, unable to try anything they might suggest.
    Why does Adobe make upgrades so painful? I remember CS2 was a PITA and took Adobe tech support a week to figure out how to get it to install.

    No, this shouldn't be extended to extended (I wouldn't expect to shell out $350 twice for extended). This is Adobe P/N 65015396 which their website says is for PhotoShop CS, CS2, CS3, and CS3 upgrades and retails for $350. The face of the box is identified as Adobe Photoshop CS4 Extended Windows and the side of the box only says that I must have an "eligible older version of Adobe or Macromedia software." It also says to check the website, which says this P/N is what to buy for my upgrade path. A mess? YES!!!

  • Problems upgrading from 10.2.8 to 10.3 Please help

    Hi, first time here. I'm trying to upgrade from osx 10.2.8 to 3.0 Panther, but each time i try to upgrade or archive and install my mac freezes and the log says that newer versions of iMovie iCal iPhoto & isync packages are already installed as i downloaded them previously. Is there any way round this to upgrade to 3.0 without losing any files or having to erase and install? I'm quite new to Macs as well so please keep it quite simple.
    Thank you

    Dan:
    You can use Pacifist to uninstall the already updated item that is preventing the upgrade. Then you follow the process below.
    Here are some suggestions on installation:
    Panther: Archive and Install
    If you do not have your original install disks or a Full Retail Version you can get one at AppleRescue or on eBay relatively inexpensively.
    If you have the right disks here is what you do.
    1. Warning: Although we will use Archive and Install there is always a risk something can go wrong. As a precaution back up your User Folder and any apps you can't afford to lose.
    2. Check to see if you have the latest Firmware Update. (Post back if you can't locate the appropriate update for your computer) Note: You must be in OS 9 to update firmware.
    3. Boot from the install disk holding down the C key.
    4. Once booted go to the Installer Menu and open Disk Utility.
    To do a clean install see Notes below
    5. Run Repair Disk. If there are problems, run it until no problems are reported. If it reports that it can't repair the problems you might need TechTool Pro or Disk Warrior.
    6. While still in Disk Utility run Repair Permissions.
    7. Quit Disk Utility and open the Installer.
    8. Choose the option to Archive and Install. This saves your data in a Previous Systems folder, which you can retrieve after installation.
    9. You might want to Customize and deselect Foreign Language Translations and Additional Printer Drivers to save Hard Drive space.
    10. Proceed with installation.
    11. After installation is complete computer will restart. Follow prompts and set up computer.
    12. Open Disk Utility (Applications > Utilities > Disk Utility) and Repair Permissions.
    13. Go online and download updates, or go to Software Update under the Apple Menu and update your OS.
    14. Transfer your User Folder from Previous Systems folder.
    NOTE (below):
    To do a clean install:
    Follow steps 1 through 4 above.
    a. In Disk Utility select your HD in left panel and Erase in main panel.
    b. Be sure Volume Format is Mac OS Extended and the checkbox Mac OS 9 Drivers Installed is checked.
    c. Select Options at bottom left in Erase panel. WARNING! This procedure will erase the contents of your entire HDD. Be sure you back up anything you cannot afford to lose!
    Select option to zero all data. Click OK. Click Erase.
    This process will take a while, so this is a good time to take a long walk or call your mother
    d. After HDD is erased resume at No. 7 above.
    Post back with any questions or comments.
    Good luck.
    cornelius
    Pismo400, 100GB 5400 Toshiba internal, 1 GB RAM; Pismo 500 OS (10.4.4) Mac OS X (10.3.9) Beige G3 OS 8.6
    Pismo400, 100GB 5400 Toshiba internal, 1 GB RAM; Pismo 500 OS (10.4.4)   Mac OS X (10.3.9)   Beige G3 OS 8.6

  • Major problems upgrading from 10.3 to 10.4

    I upgraded from 10.3 to 10.4, and all my mail save for the last 2 weeks disappeared. Those emails that did successfully survive the upgrade all contained the message "...has not been downloaded from the server". So, as was suggested in this forum, I rebuilt the mailbox. All my old mail disappeared after I did this. Needless to say, this is not an improvement. I'm unsure how to recover my old mail - anyone have any ideas?

    Hi Pitir and Allan,
    Pitir's problem might or might not have to do with truly overfull mailboxes. I have had similar problems when attempting to migrate to the Mail.app 2.0.5 (the one coming with 10.4.3).
    After a good few hours of wasted time I now refuse to accept the overfull email explanation as universally applicable. This is not intended in any way rude, Allan
    I have had large and small mailboxes show this message. A large one was ~1800 messages totaling ~43 or so MB. A small one only contained around 100 or so messages and still had the problem.
    Installed 10.4.3 cleanly on a new disk. I copied Mail.app preferences and address book (preferences and application support files). So far so good.
    Attempted importing my email into the new Mail.app in various ways:
    1) Copy the old mailbox folder + preferences etc. from my 10.3.9 disk onto the new disk and let Mail.app converte upon startup -> lots of "message not downloaded, go online" style messages.
    2) Completely empty the Mail.app 2.0.5 mail folders and start it empty. Then select the 'Import' command from the file menu. This imported everything nicely. However, running Mail.app the next day I found it had -- without telling me -- lost a lot of messages. Some of them -- I am 100% sure had been imported OK. They just vanished overnight in-betweeen two Mail.app launches. There were no error messages or warnings.
    In my experience, Mail.app 2.0.5 is not trustworthy. All I can do is recommend avoiding it. Switch to Thunderbird or something else for the time being. I hope Mail.app after 2.0.5 will fix this. I don't really know how to test that (and be confident) then, though.
    Mail.app 2.0.5 is the biggest disappointment for me so far (and I very much hope the biggest disappointment ever) as a long term user of Mac OS. It is really quite shocking.
    The blood is still on the boil a bit...
    Cheers,
    Joerg

  • Problems upgrading from Leopard to Snow Leopard

    Hopefully I'm in the right place. This is my first Apple and my first problem. Recently upgrade from Leopard to SL and have had problems ever since. Mail, TM, Safari, etc. I have searched for explanations, but unfortunately can't find answers I understand. I have MS and my cognitive functions aren't what they use to be. I have seen suggestions about clean installs, restoring from TM, cloning HD then re-installing, etc... I would love to stay with SL but need it to work, so would a clean install do the trick? If so, how do I do a "clean install"? Should I just go back to Leopard and what would be the best way? I backed up with TM before I upgraded. I have had my MBP since fall of 2007 and it was starting to slow down before the upgrade so I wouldn't mind the clean install of either OSX. Any help would be appreciated.

    since you backed up before you upgraded you can safely do the following.
    boot from the snow leopard DVD.
    start Disk Utility from the Utilities menu and erase the main hard drive.
    Quit disk utility and proceed with the install of Snow leopard. that's what many people call a "clean install".
    once the install is finished and you restart the computer you'll get to Setup Assistant. it will give you an option to migrate your data from a TM backup. you can choose to do so although it's possible that this will reintroduce the problems you are having now. another option is to skip the migration at this point (you can do it later) and set up the computer.
    now you can restore your data from the TM backup. you can use Migration Assistant (it's in /Applications/Utilities) or you can restore things by hand if using Migration assistant reintroduces the problems you are having now. you can do something in between too. you can use Migration Assistant to migrate just your user data but now system files or Applications and reinstall the applications by hand.

  • Problems upgrading from Logic 6.4 to Logic Studio

    I recently had my hard drive die, so i am now in the process of reloading all my software.  I started with Logic 6.4 years ago and have been purchasing the upgrades ever since. I first installed Logic 6.4 with the dongle inserted than i installed Logic studio. I than updated the software.  However, now Logic will not open. I get the prompt;
    "Upgrading from Logic 6.4 to Logic Studio running 10.6.7 2.66 i7 17 inch running  problem. After install Logic will not open. Updated all the software. On a Macbook Pro"
    Is there something i'm doing wrong.
    thanks for any help.
    David

    Choose About this Mac from the Apple menu, check if the computer has at least 2GB of RAM, and if it does, click here and order a download code for Lion 10.7. Doing this costs money; you may find it easier and cheaper to upgrade to Yosemite, which is free.
    Back up your data and check your applications for compatibility before upgrading. In particular, Mac OS X 10.7 and newer don't support PowerPC programs such as versions of Microsoft Office prior to 2008.
    (122702)

Maybe you are looking for