Problems upgrading iphone software

Every time I try to upgrade to the latest version I get the following error message.
"There was a problem downloading the software for the iphone ..........The network connection timed out"
Any ideas?

The usual cause of this is anti-virus software and/or firewalls running on your computer. Disable all of that stuff & try again.

Similar Messages

Problems downloading Iphone software 2.0.2

I have tried 8 time to download the Iphone software upgrade 2.0.2 and after waiting for 2 hours that is when it does not get a computer crush, I get a stop err=-3259
There has been a problem with the down load. Some type of out of time waiting for the network connection.
I do not know why Itunes is not smart enough if the connection stops, the next time Itunes is started it should continue downloading from the point it stopped. Also an option to pause and resume download should be available so the user does not have to wait the 2 hours straight.
It has been 8 times having the Iphone connected for 2 hours each try with no results.
Please can anybody help me on this

Yes you will be able to download 2.0, I have 4GB also. You need to update iTunes first though then you can download 2.0. Do not do it yet though everyone seems to be having problems finishing the installation.

Can/Should I upgrade iPhone software?

My iPhone is 3GS. I have software version 3.1 (don't think I've ever updated it!). I've noticed more and more apps are unavailable as I don't have current enough software but I'm worried if I update to the latest version I'll have problems with the battery etc. We currently have iTunes version 10.0.1.22 - do I need to upgrade iTunes also? I don't have a good track record with updating iTunes as it always seems to mess up the computer - it seems ok if you're starting from fresh with a new computer but updating an existing version of iTunes always seems a nightmare. Should I update the iPhone software or just accept that I'll have less and less access to apps? Thx.

It is ultimately your decision whether to upgrade or not.
That being said, there are a multitude of security enhancements, bug fixes, and performance enhancements that have been incorporated into iOS over the last two years.
Why are you concerned about the battery? Because a handful of users have reported battery issues after upgrading? If you look through the forums, you will see the same issues reported after EVERY iOS upgrade dating back to version 1.0.
Your version of iTunes is current, so there is no need to update that.
Just make sure you have a good backup prior to starting the update, this is the first step in the process, but always better to be safe than sorry.

Problem updating iphone software version 4.3.3

Every time I have tried to update the iphone software when prompted by itunes it crashes, sometimes at the end of the update sometimes before. It comes up with an error message every time. Please can someone help?

First thing I'd do is check that I have the latest version of iTunes. This has cought me out a few times. Other thing that I've experienced is a iTunes seems to think there is a problem with my USB socket, so I've tried another and it's worked fine.
But yes what is your error and error number?

Upgraded Iphone software and apps won't load

I updated by Iphone software to the latest version last week and now none of my applications will load onto the iphone, i have tried deleting the applications and getting them again from the I-Tunes store but this doesn't work either... can any one please help me??

Hmmm sorry pal, I think you may be stuffed. I have had the same problem with some of my apps, that don't seem to work anymore ie they load, but then just crash out.

Upgrading iPhone software 3.0 through iTunes but won't update

I've been trying to update my iPhone software to 3.0 through iTunes on my home PC, but it keeps giving me an error message saying that the "software update server cannot be contacted. Check internet connection or try again later." My internet connect is active/fine, have already downloaded the latest version of iTunes (8.2), so what's wrong???

I think I've figured this out.
Using another PC on a different network, which doesn't have a restrictive firewall, and the synch to Gmail contacts worked...
I didn't think it was a firewall problem, because in the original attempt, I even used Wireshark to sniff the network traffic for the synchronization traffic. I only saw http traffic to the google servers, and that's not restricted...so I must have missed something in the network trace, but my guess is that the firewall (a cisco 5500 series) was blocking the authentication traffic. Perhaps it uses imap or some other protocol besides http or https, which would have been allowed.
I also log all dropped traffic in a syslog, and didn't see any entries corresponding to the synch, but again, I may have missed something.
So, at any rate, it is now working and I'm pretty certain it was the cisco firewall policy that was the problem.

Problem downloading iphone software

Hey I am trying to update the latest sofware for my iphone 3gs (version 4.3.3). It downloads but just as it finishes downloading the error message "There was a problem downloading the software to the iphone 'Pauline's iphone'. The network connection timed out." comes up. I have tried 5 times but the same thing happens every time.
Please help me how do i solve this issue?

Did I miss your post in this thread? The one where you laid out the issues you were having and any error messages you were getting? I must have because I don't remember seeing it here.
Of course Apple is sometimes wrong. For 2 updates in a row I had echo problems when using BT with my car. I sent in feedback and I called AppleCare. Eventually it was fixed.
But for the OP in THIS thread the problem was their antivirus/antispyware software and the solution worked for them.
If you are sure it is a problem with 4.3.3 (and I know a number of people with Windows computers that updated and didn't have an issue so it is not a systematic problem) then wait for iOS 5 and maybe it will be fixed in that update.

HT4972 Upgrade iPhone software version from 4.3.4 to the latest available

I am trying to upgrade my iPhone software version from 4.3.4 to the latest and keep getting this message whenever I hit <Update> or <Restore>. "The iPhone software update server could not be contacted" - what should I do?

Start by making sure you have disabled any firewall or antivirus programs.

Having problems updating iphone software to version 5.0

I currently have version 4.3.1 and finally decided to update iphone software to version 5.0. It goes through the 6 minute process, but then I get the error message: "There was a probem downloading the software for the IPhone -----. The network connection ttimed out. Make sure your network setting are correct and your network connection is active or try again later."
I've tried several times and keep getting the same message. My network connection is active and I've just the firewall and made sure it allows itunes updates.
Please help! Any other suggestions? When answering please be very specific - I'm really clueless with the computer.
Thanks in advance!

try this,
Plug in, click update software, and click download ONLY.
Let the ipsw file download complete,... then click update.
This way is much better. If you keep having error message, its either your internet connection is inconsistent or Apple's server is inconsistent... usually more likely the former.

Problems upgrading iPhone 4 to latest iOS (7.1.2)

Hi, I'm trying to upgrade an iPhone 4 from iOS 6.0.1 to the latest version (7.1.2) but facing the dreaded 3194 error in iTunes. I have tried everything from resetting my hosts file to disabling my firewall and anti-virus but the error just will not go away.. it occurs right at the end of the restore process after the software has been restored and is being verified. I looked through the update log and it seems to be an issue with updating the baseband. Copying a section of the log below.
This phone has never been jailbroken or modified in any way. Please help!!!
[20:50:15.0138] update_baseband: requesting baseband firmware data
[20:50:15.0138] [nand_part_core:INF@3169] next 87 pages of boot blocks written with LLB image of size 133632 bytes
[20:50:15.0138] [nand_part_core:INF@3172] final 39 pages of boot blocks left unprogrammed
[20:50:15.0138] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x95213420
[20:50:15.0138] recv(13, 4) failed: connection closed
[20:50:15.0138] unable to read message size: -1
[20:50:15.0138] 0: RamrodErrorDomain/3: update_baseband: host failed to provide baseband data
[20:50:15.0138] unable to convert ramrod error 3
[20:50:15.0138] restore failed with CFError:
[20:50:15.0138] 0: AMRestoreErrorDomain/ffffffff: failed to update device firmware
[20:50:15.0138] 1: AMRestoreErrorDomain/ffffffff: ramrod firmware update failed
[20:50:15.0138] 2: RamrodErrorDomain/3: update_baseband: host failed to provide baseband data
[20:50:15.0138] send(13, 31560) failed: Broken pipe
[20:50:15.0138] error sending final status message: -1
[20:50:15.0138] waiting for host to acknowledge final status received...
[20:50:15.0138] recv(13, 4) failed: Connection reset by peer
[20:50:15.0138] unable to read message size: -1
[20:50:15.0138] received NULL message from host, expected final status
Full log as follows:
2014-07-12 01:48:30.497 [4552:135c]: restore library built Feb 12 2014 at 16:27:17
2014-07-12 01:48:30.497 [4552:135c]: iTunes: iTunes 11.2.2.3
2014-07-12 01:48:30.497 [4552:135c]: iTunes: Software payload version: 11D257 (option key)
2014-07-12 01:48:30.497 [4552:135c]: iTunes: Using MobileRestore state machine
[20:49:26.0904] Changing state from 'Idle' to 'Restoring'
[20:49:26.0904] requested restore behavior: Erase
[20:49:26.0914] requested variant: Erase
[20:49:26.0914] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[20:49:27.0729] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is True
[20:49:27.0729] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreLogo" Digest = "<CFData 0724AF80 [731B907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[20:49:27.0739] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreDeviceTree" Digest = "<CFData 0724B0A0 [731B907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[20:49:27.0739] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreKernelCache" Digest = "<CFData 0724B208 [731B907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[20:49:27.0739] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreRamDisk" Digest = "<CFData 0724B1C0 [731B907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[20:49:27.0739] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBEC" Digest = "<CFData 0724A050 [731B907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[20:49:27.0739] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBSS" Digest = "<CFData 0724AEF0 [731B907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[20:49:27.0739] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "KernelCache" Digest = "<CFData 0724AE18 [731B907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[20:49:27.0739] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow1" Digest = "<CFData 07249FC0 [731B907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[20:49:27.0739] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow0" Digest = "<CFData 0724AB48 [731B907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[20:49:27.0739] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "LLB" Digest = "<CFData 0724ACF8 [731B907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[20:49:27.0749] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBoot" Digest = "<CFData 0724B3B8 [731B907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[20:49:27.0749] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "DeviceTree" Digest = "<CFData 0724ADD0 [731B907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[20:49:27.0749] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging1" Digest = "<CFData 0724ACB0 [731B907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[20:49:27.0749] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "AppleLogo" Digest = "<CFData 0724AD40 [731B907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[20:49:27.0749] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryPlugin" Digest = "<CFData 0724AAB8 [731B907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[20:49:27.0749] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryFull" Digest = "<CFData 0724A7E8 [731B907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[20:49:27.0749] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging0" Digest = "<CFData 0724A680 [731B907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[20:49:27.0749] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RecoveryMode" Digest = "<CFData 0724A368 [731B907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[20:49:27.0749] amai: _AMAuthInstallBundleCreateServerRequestDictionary: using UniqueBuildID <CFData 07102F28 [731B907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
[20:49:27.0749] amai: AMAuthInstallRequestSendSync: SSO function returned NULL, SSO disabled.
[20:49:27.0759] amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/Atto/AppData/Local/Temp/Per21A8.tmp/amai/debug/tss-re quest.plist
[20:49:28.0539] amai: tss_submit_job: HttpQueryInfo returned 200
[20:49:28.0779] amai: AMAuthInstallRequestSendSync: received tss response (server version: 2.1.0)
[20:49:28.0779] amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/Atto/AppData/Local/Temp/Per21A8.tmp/amai/debug/tss-re sponse.plist
[20:49:28.0899] amai: _AMAuthInstallBundlePopulatePersonalizedBundle: no entry in manifest found for "Diags"
[20:49:28.0929] iBoot build-version = iBoot-1940.10.58
[20:49:28.0929] iBoot build-style = RELEASE
[20:49:28.0929] requested restore behavior: Erase
[20:49:28.0929] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[20:49:28.0929] requested restore behavior: Erase
[20:49:28.0939] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[20:49:28.0939] unable to open device_map.txt: No such file or directory
[20:49:28.0939] found device map entry for 0x00008930 0x00000000. boardConfig=n90ap platform=s5l8930x
[20:49:28.0939] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[20:49:28.0939] AMDeviceIoControl: GetOverlappedResult failed
[20:49:28.0939] AMDeviceIoControl: pipe stall
[20:49:28.0939] USBControlTransfer: error 31, usbd status c0000004
[20:49:28.0939] command device request for 'getenv radio-error' failed: 2008
[20:49:28.0939] radio-error not set
[20:49:28.0939] unable to open device_map.txt: No such file or directory
[20:49:28.0949] <Recovery Mode Device 06F709F0>: production fused device
[20:49:28.0949] requested restore behavior: Erase
[20:49:28.0949] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[20:49:28.0949] requested restore behavior: Erase
[20:49:28.0949] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[20:49:28.0949] interface has 1 endpoints, file pipe = 1
[20:49:28.0949]
[20:49:28.0949] <Recovery Mode Device 06F709F0>: operation 4 progress -1
[20:49:29.0009] bootstrapping restore with iBEC
[20:49:29.0009] requested restore behavior: Erase
[20:49:29.0019] <Recovery Mode Device 06F709F0>: operation 31 progress -1
[20:49:30.0019] <Recovery Mode Device 06F709F0>: Recovery mode succeeded
[20:49:30.0019] Finished Recovery Restore Phase: Successful
[20:49:30.0529] Recovery mode device disconnected
[20:49:30.0539] Device removed when in state Restoring, moving device to transition state
[20:49:30.0539] Changing state from 'Restoring' to 'Transitioning'
[20:49:30.0539] Creating timer to monitor transition
[20:49:34.0228] Recovery mode device connected
[20:49:34.0228] Transitioning device returned, continuing restore.
[20:49:34.0228] Canceling timer
[20:49:34.0228] Changing state from 'Transitioning' to 'Restoring'
[20:49:34.0228] requested restore behavior: Erase
[20:49:34.0228] requested variant: Erase
[20:49:34.0238] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[20:49:35.0060] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
[20:49:35.0060] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
[20:49:35.0060] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
[20:49:35.0060] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreKernelCache"
[20:49:35.0060] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreRamDisk"
[20:49:35.0060] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBEC" has been previously personalized; skipping it
[20:49:35.0060] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has been previously personalized; skipping it
[20:49:35.0060] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "KernelCache"
[20:49:35.0070] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
[20:49:35.0070] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
[20:49:35.0070] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been previously personalized; skipping it
[20:49:35.0070] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
[20:49:35.0070] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
[20:49:35.0070] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
[20:49:35.0070] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
[20:49:35.0070] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
[20:49:35.0070] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
[20:49:35.0070] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
[20:49:35.0070] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
[20:49:35.0070] amai: _AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
[20:49:35.0070] iBoot build-version = iBoot-1940.10.58
[20:49:35.0080] iBoot build-style = RELEASE
[20:49:35.0080] requested restore behavior: Erase
[20:49:35.0080] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[20:49:35.0080] requested restore behavior: Erase
[20:49:35.0080] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[20:49:35.0080] unable to open device_map.txt: No such file or directory
[20:49:35.0080] found device map entry for 0x00008930 0x00000000. boardConfig=n90ap platform=s5l8930x
[20:49:35.0080] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[20:49:35.0080] AMDeviceIoControl: GetOverlappedResult failed
[20:49:35.0080] AMDeviceIoControl: pipe stall
[20:49:35.0080] USBControlTransfer: error 31, usbd status c0000004
[20:49:35.0080] command device request for 'getenv radio-error' failed: 2008
[20:49:35.0080] radio-error not set
[20:49:35.0080] unable to open device_map.txt: No such file or directory
[20:49:35.0090] <Recovery Mode Device 06FA4F28>: production fused device
[20:49:35.0090] requested restore behavior: Erase
[20:49:35.0090] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[20:49:35.0090] requested restore behavior: Erase
[20:49:35.0090] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[20:49:35.0090] interface has 1 endpoints, file pipe = 1
[20:49:35.0090]
[20:49:35.0090] <Recovery Mode Device 06FA4F28>: operation 4 progress -1
[20:49:35.0140] unable to open device_map.txt: No such file or directory
[20:49:35.0150] found device map entry for 0x00008930 0x00000000. boardConfig=n90ap platform=s5l8930x
[20:49:35.0150] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[20:49:35.0150] requested restore behavior: Erase
[20:49:35.0150] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[20:49:35.0150] requested restore behavior: Erase
[20:49:35.0150] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[20:49:35.0150] <Recovery Mode Device 06FA4F28>: operation 42 progress -1
[20:49:35.0160] requested restore behavior: Erase
[20:49:35.0160] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[20:49:36.0190] <Recovery Mode Device 06FA4F28>: operation 5 progress -1
[20:49:36.0490] unable to open device_map.txt: No such file or directory
[20:49:36.0500] found device map entry for 0x00008930 0x00000000. boardConfig=n90ap platform=s5l8930x
[20:49:36.0500] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[20:49:36.0500] AMDeviceIoControl: GetOverlappedResult failed
[20:49:36.0500] AMDeviceIoControl: pipe stall
[20:49:36.0500] USBControlTransfer: error 31, usbd status c0000004
[20:49:36.0500] command device request for 'getenv ramdisk-delay' failed: 2008
[20:49:38.0420] <Recovery Mode Device 06FA4F28>: operation 6 progress -1
[20:49:39.0430] <Recovery Mode Device 06FA4F28>: operation 7 progress -1
[20:49:39.0700] <Recovery Mode Device 06FA4F28>: operation 8 progress -1
[20:49:39.0700] unable to open device_map.txt: No such file or directory
[20:49:39.0700] found device map entry for 0x00008930 0x00000000. boardConfig=n90ap platform=s5l8930x
[20:49:39.0700] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[20:49:39.0700] <Recovery Mode Device 06FA4F28>: operation 9 progress -1
[20:49:39.0700] <Recovery Mode Device 06FA4F28>: Recovery mode succeeded
[20:49:39.0700] Finished Recovery Restore Phase: Successful
[20:49:42.0030] Recovery mode device disconnected
[20:49:42.0030] Device removed when in state Restoring, moving device to transition state
[20:49:42.0030] Changing state from 'Restoring' to 'Transitioning'
[20:49:42.0030] Creating timer to monitor transition
[20:49:46.0813] RestoreOS mode device connected
[20:49:46.0813] Transitioning device returned, continuing restore.
[20:49:46.0813] Canceling timer
[20:49:46.0813] Changing state from 'Transitioning' to 'Restoring'
[20:49:46.0823] <Restore Device 0735FD18>: operation 44 progress -1
[20:49:46.0823] requested restore behavior: Erase
[20:49:46.0823] requested variant: Erase
[20:49:46.0823] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[20:49:47.0673] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
[20:49:47.0673] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
[20:49:47.0673] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
[20:49:47.0673] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreKernelCache"
[20:49:47.0673] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreRamDisk"
[20:49:47.0673] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBEC" has been previously personalized; skipping it
[20:49:47.0673] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has been previously personalized; skipping it
[20:49:47.0673] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "KernelCache"
[20:49:47.0673] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
[20:49:47.0673] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
[20:49:47.0683] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been previously personalized; skipping it
[20:49:47.0683] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
[20:49:47.0683] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
[20:49:47.0683] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
[20:49:47.0683] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
[20:49:47.0683] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
[20:49:47.0683] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
[20:49:47.0683] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
[20:49:47.0683] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
[20:49:47.0683] amai: _AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
[20:49:47.0683] requested restore behavior: Erase
[20:49:47.0683] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[20:49:47.0693] device did not return saved USB log
[20:49:47.0693] device did not return saved panic log
[20:49:47.0693] previous restore failed with exit status 0x100
[20:49:47.0693] connected to service com.apple.mobile.restored
[20:49:47.0693] using protocol version 13
[20:49:47.0703] unable to open device_map.txt: No such file or directory
[20:49:47.0703] board config = n90ap
[20:49:47.0703] no value returned for BootArgs
[20:49:47.0703] _copyDeviceProperty() failed for restore bootargs
[20:49:47.0713] no value returned for MarketingPartNumber
[20:49:47.0713] _copyDeviceProperty() failed for mpn
[20:49:47.0713] requested restore behavior: Erase
[20:49:47.0713] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[20:49:47.0723] value query for 'HardwareModel' returned 'N90AP'
[20:49:47.0743] <Restore Device 0735FD18>: operation 28 progress -1
[20:50:15.0138] previous restore failed: 0x0
[20:50:15.0138] Scaler 0 enableDeviceClock(false,FULL_CLOCK_INDEX) = 0x0
[20:50:15.0138] void AppleRGBOUT::verify_swap_gated(IOMFBSwapIORequest *, bool *) failed fIsDPOut: 0 fDPDriver: 0 fTVOUTDelegate: 0
[20:50:15.0138] AppleRGBOUT verify_swap failed
[20:50:15.0138] void AppleRGBOUT::verify_swap_gated(IOMFBSwapIORequest *, bool *) failed fIsDPOut: 0 fDPDriver: 0 fTVOUTDelegate: 0
[20:50:15.0138] AppleRGBOUT verify_swap failed
[20:50:15.0138] AppleS5L8920XBasebandSPIController::loadConfiguration: NCLK Frequency 48857142, Prescaler 3
[20:50:15.0138] BasebandSPIDevice::exitLowPower: Invalid state inactive
[20:50:15.0138] AppleSerialMultiplexer: adap::start: Frame size is 2048, Rx Buffer count is 16
[20:50:15.0138] AppleSerialMultiplexer: mux::start: created new mux (17) for spi-baseband with adapter BasebandSPIDevice
[20:50:15.0138] AppleSerialMultiplexer: debugparams::init: Parsed flags "" ( 0 )
[20:50:15.0138] AppleSerialMultiplexer: !! mux::setPowerStateGated: Skipping power state change
[20:50:15.0138] AppleSamsungSerial: Identified Serial Port on ARM Device=uart1 at 0x82600000(0x90d33000)
[20:50:15.0138] AppleSamsungSerial: Identified Serial Port on ARM Device=uart2 at 0x82700000(0x90d35000)
[20:50:15.0138] AppleSamsungSerial: Identified Serial Port on ARM Device=uart3 at 0x82800000(0x90d38000)
[20:50:15.0138] AppleSamsungSerial: Identified Serial Port on ARM Device=uart6 at 0x82b00000(0x90d3a000)
[20:50:15.0138] [HPark] AUD10::start: 0x80249000, highland-park mIISNub: 0x938fe100, sampleRate = 44100, ol=10, oi=12
[20:50:15.0138] AppleCS42L61Audio: could not allocate control 395
[20:50:15.0138] AppleARMBacklight::start: _minDACLevel=456 _maxDACLevel=1971
[20:50:15.0138] AppleMultitouchN1SPI: successfully started
[20:50:15.0138] AppleRGBOUT: TVOUT device is detected
[20:50:15.0138] ApplePinotLCD: _lcdPanelID: 0xb2d105c8 _lcdPanelClass: 2
[20:50:15.0138] IOReturn AppleMobileCLCD::set_ditherTable_state(bool), mIsCLCDDitherFor8Bits is true, no dynamic dither table.
[20:50:15.0138] AppleD1815PMUPowerSource: AppleUSBCableDetect 1
[20:50:15.0138] AppleD1815PMUPowerSource: AppleUSBCableType USBHost
[20:50:15.0138] [HPark] AUD10::start: 0x80249000, highland-park mIICNub: 0x91b5d540, mIISNub: 0x938fe100, mSerialNub: 0x938a7400, sampleRate = 44100, ol=10, oi=12
[20:50:15.0138] [HPark] AUD10 ATSc values: [ mic1: 0x000000ef, mic2: 0x0000000b, mic3: 0x00000000, recv: 0x00000013, spk: 0x00000000 ]
[20:50:15.0138] [HPark] AUD10::setPowerState() function called whereas Start() is not finished
[20:50:15.0138] AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don't have device configuration yet
[20:50:15.0138] AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don't have device configuration yet
[20:50:15.0138] AppleMultitouchN1SPI: detected HBPP. driver will be kept alive
[20:50:15.0138] IOSDIOController::enumerateSlot(): Searching for SDIO device in slot: 0
[20:50:15.0138] IOSDIOController::enumerateSlot(): Found SDIO I/O device. Function count(1), memory(0)
[20:50:15.0138] IOSDIOIoCardDevice::parseFn0CISTuple(): Device manufacturer ID 0x2d0, Product ID 0x4329
[20:50:15.0138] IOSDIOIoCardDevice::parseFn0CISTuple(): Manufacturer: ""
[20:50:15.0138] IOSDIOIoCardDevice::parseFn0CISTuple(): Product:      ""
[20:50:15.0138] IOSDIOIoCardDevice::parseFn0CISTuple(): ProductInfo0: "s=B1"
[20:50:15.0138] IOSDIOIoCardDevice::parseFn0CISTuple(): ProductInfo1: "P=N90 m=3.1 V=m"
[20:50:15.0138] AppleBCMWLANBusInterfaceSdio::start(): Started by: IOSDIOIoCardDevice, AppleBCMWLANV2-259 Jun 11 2014 20:13:01
[20:50:15.0138] AppleBCMWLANCore::init(): IO80211-46 Jun 11 2014 20:10:01
[20:50:15.0138] 000333.424645 wlan.N[0] AppleBCMWLANCore::start(): Starting with MAC Address: <<<mac address>>>
[20:50:15.0138] IO80211Peer::addPhyStatistics Phy stats started for addr <<<mac address>>>
[20:50:15.0138] IO80211Peer::addPhyStatistics Tx Completion stats started for addr <<<mac address>>>
[20:50:15.0138] IO80211PeerManager::initWithInterface cant add monitoring timer
[20:50:15.0138] Started logging for intf
[20:50:15.0138] IO80211PeerManager::initWithInterface: inited peer manager
[20:50:15.0138] IO80211Interface::init peerManager=0x939e8000
[20:50:15.0138] start:156
[20:50:15.0138] start:156
[20:50:15.0138] 000333.428295 wlan.N[1] AppleBCMWLANCore::setPowerStateGated():   powerState 1, fStateFlags 0x20, dev 0x8044f000 (this 1, provider 0)
[20:50:15.0138] 000333.428339 wlan.N[2] AppleBCMWLANCore::setPowerStateGated(): Received power state change before driver has initialized, ignoring
[20:50:15.0138] AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don't have device configuration yet
[20:50:15.0138] read new style signature 0x43313131 (line:389)
[20:50:15.0138] [FTL:MSG] VSVFL Register [OK]
[20:50:15.0138] [WMR:MSG] Metadata whitening is set in NAND signature
[20:50:15.0138] [FTL:MSG] VFL Init            [OK]
[20:50:15.0138] display-scale = 2
[20:50:15.0138] display-rotation = 0
[20:50:15.0138] found applelogo at /usr/share/progressui/[email protected]
[20:50:15.0138] [FTL:MSG] VFL_Open            [OK]
[20:50:15.0138] [FTL:MSG] YAFTL Register [OK]
[20:50:15.0138] found display: primary
[20:50:15.0138] display: 640 x 960
[20:50:15.0138] found PTP interface
[20:50:15.0138] AppleSynopsysOTGDevice - Configuration: PTP
[20:50:15.0138] AppleSynopsysOTGDevice          Interface: PTP
[20:50:15.0138] AppleSynopsysOTGDevice - Configuration: iPod USB Interface
[20:50:15.0138] AppleSynopsysOTGDevice          Interface: USBAudioControl
[20:50:15.0138] AppleSynopsysOTGDevice          Interface: USBAudioStreaming
[20:50:15.0138] AppleSynopsysOTGDevice          Interface: IapOverUsbHid
[20:50:15.0138] AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device
[20:50:15.0138] AppleSynopsysOTGDevice          Interface: PTP
[20:50:15.0138] AppleSynopsysOTGDevice          Interface: AppleUSBMux
[20:50:15.0138] AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device + Apple USB Ethernet
[20:50:15.0138] AppleSynopsysOTGDevice          Interface: PTP
[20:50:15.0138] AppleSynopsysOTGDevice          Interface: AppleUSBMux
[20:50:15.0138] AppleSynopsysOTGDevice          Interface: AppleUSBEthernet
[20:50:15.0138] AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioControl
[20:50:15.0138] AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioStreaming
[20:50:15.0138] IOAccessoryPortUSB::start
[20:50:15.0138] AppleSynopsysOTGDevice::gated_registerFunction Register function IapOverUsbHid
[20:50:15.0138] virtual bool AppleUSBDeviceMux::start(IOService *) build: Jun 11 2014 20:11:28
[20:50:15.0138] init_waste
[20:50:15.0138] AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBMux
[20:50:15.0138] AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBEthernet
[20:50:15.0138] [FTL:MSG] FTL_Open            [OK]
[20:50:15.0138] [NAND] _publishServices:642 FTL capabilities: 0x00000000
[20:50:15.0138] [nand_part_core:INF@ 157] published partition 0
[20:50:15.0138] [nand_part_core:INF@ 157] published partition 1
[20:50:15.0138] [nand_part_core:INF@ 157] published partition 2
[20:50:15.0138] [nand_part_core:INF@ 157] published partition 3
[20:50:15.0138] [nand_part_core:INF@ 157] published partition 5
[20:50:15.0138] [nand_part_core:INF@ 157] published partition 6
[20:50:15.0138] AppleSynopsysOTGDevice::gated_registerFunction Register function PTP
[20:50:15.0138] AppleSynopsysOTGDevice::startUSBStack Starting usb stack
[20:50:15.0138] IOReturn AppleUSBDeviceMux::setPropertiesGated(OSObject *) setting debug level to 7
[20:50:15.0138] [effaceable:INIT] found current generation, 182, in group 1
[20:50:15.0138] [effaceable:INIT] started
[20:50:15.0138] [effaceable:INIT] started
[20:50:15.0138] AppleARMBacklight::start: No AAP function
[20:50:15.0138] AppleUSBDeviceMux::handleConnectResult new session 0x95213580 established 62078<-lo0->49152 62078<-usb->4864
[20:50:15.0138] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x95213580
[20:50:15.0138] recv(13, 4) failed: connection closed
[20:50:15.0138] unable to read message size: -1
[20:50:15.0138] could not receive message
[20:50:15.0138] AppleUSBDeviceMux::handleConnectResult new session 0x95213580 established 62078<-lo0->49153 62078<-usb->5120
[20:50:15.0138] AppleUSBDeviceMux::handleConnectResult new session 0x952134d0 established 62078<-lo0->49154 62078<-usb->5376
[20:50:15.0138] AppleUSBDeviceMux::handleConnectResult new session 0x95213478 established 62078<-lo0->49155 62078<-usb->5632
[20:50:15.0138] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x95213580
[20:50:15.0138] AppleUSBDeviceMux::handleConnectResult new session 0x95213580 established 62078<-lo0->49156 62078<-usb->5888
[20:50:15.0138] recv(13, 4) failed: connection closed
[20:50:15.0138] unable to read message size: -1
[20:50:15.0138] could not receive message
[20:50:15.0138] AppleUSBDeviceMux::handleConnectResult new session 0x95213420 established 62078<-lo0->49157 62078<-usb->6144
[20:50:15.0138] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x95213478
[20:50:15.0138] recv(15, 4) failed: connection closed
[20:50:15.0138] unable to read message size: -1
[20:50:15.0138] could not receive message
[20:50:15.0138] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x95213580
[20:50:15.0138] recv(13, 4) failed: connection closed
[20:50:15.0138] unable to read message size: -1
[20:50:15.0138] could not receive message
[20:50:15.0138] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x952134d0
[20:50:15.0138] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x95213420
[20:50:15.0138] AppleUSBDeviceMux::handleConnectResult new session 0x95213420 established 62078<-lo0->49158 62078<-usb->6400
[20:50:15.0138] recv(14, 4) failed: connection closed
[20:50:15.0138] unable to read message size: -1
[20:50:15.0138] could not receive message
[20:50:15.0138] recv(16, 4) failed: connection closed
[20:50:15.0138] unable to read message size: -1
[20:50:15.0138] could not receive message
[20:50:15.0138] AppleUSBDeviceMux::handleConnectResult new session 0x952134d0 established 62078<-lo0->49159 62078<-usb->6656
[20:50:15.0138] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x952134d0
[20:50:15.0138] recv(14, 4) failed: connection closed
[20:50:15.0138] unable to read message size: -1
[20:50:15.0138] could not receive message
[20:50:15.0138] AppleUSBDeviceMux::handleConnectResult new session 0x952134d0 established 62078<-lo0->49160 62078<-usb->6912
[20:50:15.0138] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x952134d0
[20:50:15.0138] recv(14, 4) failed: connection closed
[20:50:15.0138] unable to read message size: -1
[20:50:15.0138] could not receive message
[20:50:15.0138] AppleUSBDeviceMux::handleConnectResult new session 0x952134d0 established 62078<-lo0->49161 62078<-usb->7168
[20:50:15.0138] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x952134d0
[20:50:15.0138] recv(7, 4) failed: connection closed
[20:50:15.0138] unable to read message size: -1
[20:50:15.0138] could not receive message
[20:50:15.0138] AppleUSBDeviceMux::handleConnectResult new session 0x952134d0 established 62078<-lo0->49162 62078<-usb->7424
[20:50:15.0138] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x952134d0
[20:50:15.0138] recv(7, 4) failed: connection closed
[20:50:15.0138] unable to read message size: -1
[20:50:15.0138] could not receive message
[20:50:15.0138] AppleUSBDeviceMux::handleConnectResult new session 0x952134d0 established 62078<-lo0->49163 62078<-usb->7680
[20:50:15.0138] unrecognized key 'BootArgs' in value query
[20:50:15.0138] failed to handle value query for key 'BootArgs', sending back empty response
[20:50:15.0138] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x952134d0
[20:50:15.0138] AppleUSBDeviceMux::handleConnectResult new session 0x952134d0 established 62078<-lo0->49164 62078<-usb->7936
[20:50:15.0138] recv(7, 4) failed: connection closed
[20:50:15.0138] unable to read message size: -1
[20:50:15.0138] could not receive message
[20:50:15.0138] unrecognized key 'MarketingPartNumber' in value query
[20:50:15.0138] failed to handle value query for key 'MarketingPartNumber', sending back empty response
[20:50:15.0138] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x952134d0
[20:50:15.0138] recv(7, 4) failed: connection closed
[20:50:15.0138] unable to read message size: -1
[20:50:15.0138] could not receive message
[20:50:15.0138] AppleUSBDeviceMux::handleConnectResult new session 0x952134d0 established 62078<-lo0->49165 62078<-usb->8192
[20:50:15.0138] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x952134d0
[20:50:15.0138] recv(7, 4) failed: connection closed
[20:50:15.0138] unable to read message size: -1
[20:50:15.0138] could not receive message
[20:50:15.0138] client protocol version 13
[20:50:15.0138] *** UUID A6457AB6-F30A-724E-8954-04B63CF72E04 ***
[20:50:15.0138] Restore options:
[20:50:15.0138] UUID                           => <CFString 0xe742b0 [0x2f2ae0]>{contents = "A6457AB6-F30A-724E-8954-04B63CF72E04"}
[20:50:15.0138] MinimumSystemPartition         => <CFNumber 0xe74200 [0x2f2ae0]>{value = +1531, type = kCFNumberSInt64Type}
[20:50:15.0138] SystemPartitionSize            => <CFNumber 0xe73b70 [0x2f2ae0]>{value = +1531, type = kCFNumberSInt64Type}
[20:50:15.0138] SystemPartitionPadding         => <CFBasicHash 0xe75210 [0x2f2ae0]>{type = mutable dict, count = 5,
[20:50:15.0138] entries =>
[20:50:15.0138] 2 : <CFString 0xe74230 [0x2f2ae0]>{contents = "128"} = <CFNumber 0xe74260 [0x2f2ae0]>{value = +1280, type = kCFNumberSInt64Type}
[20:50:15.0138] 3 : <CFString 0xe741d0 [0x2f2ae0]>{contents = "16"} = <CFNumber 0xe73e70 [0x2f2ae0]>{value = +160, type = kCFNumberSInt64Type}
[20:50:15.0138] 4 : <CFString 0xe75dc0 [0x2f2ae0]>{contents = "32"} = <CFNumber 0xe737f0 [0x2f2ae0]>{value = +320, type = kCFNumberSInt64Type}
[20:50:15.0138] 5 : <CFString 0xe73c30 [0x2f2ae0]>{contents = "8"} = <CFNumber 0xe73b60 [0x2f2ae0]>{value = +80, type = kCFNumberSInt64Type}
[20:50:15.0138] 8 : <CFString 0xe73800 [0x2f2ae0]>{contents = "64"} = <CFNumber 0xe73c80 [0x2f2ae0]>{value = +640, type = kCFNumberSInt64Type}
[20:50:15.0138] }
[20:50:15.0138]
[20:50:15.0138] entering load_sep_os
[20:50:15.0138] device has no sep
[20:50:15.0138] entering partition_nand_device
[20:50:15.0138] device supports boot-from-NAND
[20:50:15.0138] nand device is already partitioned
[20:50:15.0138] entering wait_for_storage_device
[20:50:15.0138] Searching for NAND service
[20:50:15.0138] Found NAND service: IOFlashStoragePartition
[20:50:15.0138] NAND initialized. Waiting for devnode.
[20:50:15.0138] entering clear_remap_variable
[20:50:15.0138] executing /usr/sbin/nvram
[20:50:15.0138] entering format_effaceable_storage
[20:50:15.0138] effaceable storage is formatted, clearing it
[20:50:15.0138] effaceable storaged cleared
[20:50:15.0138] entering ramrod_probe_media
[20:50:15.0138] device partitioning scheme is GPT
[20:50:15.0138] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
[20:50:15.0138] executing /sbin/fsck_hfs
[20:50:15.0138] ** /dev/rdisk0s1s1
[20:50:15.0138]    Executing fsck_hfs (version hfs-277.10.5).
[20:50:15.0138] ** Checking Journaled HFS Plus volume.
[20:50:15.0138] ** Detected a case-sensitive volume.
[20:50:15.0138]    The volume name is Sochi11D257.N90OS
[20:50:15.0138] ** Checking extents overflow file.
[20:50:15.0138] ** Checking catalog file.
[20:50:15.0138] ** Checking multi-linked files.
[20:50:15.0138] ** Checking catalog hierarchy.
[20:50:15.0138] ** Checking extended attributes file.
[20:50:15.0138] ** Checking volume bitmap.
[20:50:15.0138] ** Checking volume information.
[20:50:15.0138] ** Trimming unused blocks.
[20:50:15.0138] ** The volume Sochi11D257.N90OS appears to be OK.
[20:50:15.0138] executing /sbin/mount_hfs
[20:50:15.0138] /dev/disk0s1s1 mounted on /mnt1
[20:50:15.0138] entering check_for_restore_log
[20:50:15.0138] found restore log (size = 29025)
[20:50:15.0138] entering unmount_filesystems
[20:50:15.0138] error unmounting '/mnt2': Invalid argument
[20:50:15.0138] entering clean_NAND
[20:50:15.0138] NAND format complete
[20:50:15.0138] entering ramrod_probe_media
[20:50:15.0138] find_filesystem_partitions: storage=/dev/disk0 system= data=
[20:50:15.0138] entering format_storage_for_LwVM
[20:50:15.0138] entering ramrod_probe_media
[20:50:15.0138] device partitioning scheme is GPT
[20:50:15.0138] unexpected partition 'LwVM' - skipping
[20:50:15.0138] find_filesystem_partitions: storage=/dev/disk0s1 system= data=
[20:50:15.0138] entering create_filesystem_partitions
[20:50:15.0138] User specified system partition size, skipping firmware extras size.
[20:50:15.0138] system partition padding size is: 167772160 bytes
[20:50:15.0138] unable to open : No such file or directory
[20:50:15.0138] creating 2 partitions
[20:50:15.0138] creating encrypted data partition
[20:50:15.0138] entering ramrod_probe_media
[20:50:15.0138] device partitioning scheme is GPT
[20:50:15.0138] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
[20:50:15.0138] wipe entire partition: 1 (old = 0 new = 1691)
[20:50:15.0138] block size for /dev/disk0s1s1: 8192
[20:50:15.0138] /sbin/newfs_hfs -s -v System -J -b 8192 -n a=8192,c=8192,e=8192 /dev/disk0s1s1
[20:50:15.0138] executing /sbin/newfs_hfs -s -v System -J -b 8192 -n a=8192,c=8192,e=8192 /dev/disk0s1s1
[20:50:15.0138] Initialized /dev/rdisk0s1s1 as a 2 GB case-sensitive HFS Plus volume with a 8192k journal
[20:50:15.0138] block size for /dev/disk0s1s2: 8192
[20:50:15.0138] /sbin/newfs_hfs -s -v Data -J -P -b 8192 -n a=8192,c=8192,e=8192 /dev/disk0s1s2
[20:50:15.0138] executing /sbin/newfs_hfs -s -v Data -J -P -b 8192 -n a=8192,c=8192,e=8192 /dev/disk0s1s2
[20:50:15.0138] Initialized /dev/rdisk0s1s2 as a 13 GB case-sensitive HFS Plus volume with a 8192k journal
[20:50:15.0138] entering ramrod_probe_media
[20:50:15.0138] device partitioning scheme is GPT
[20:50:15.0138] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
[20:50:15.0138] entering mount_filesystems
[20:50:15.0138] executing /sbin/fsck_hfs
[20:50:15.0138] ** /dev/rdisk0s1s1
[20:50:15.0138]    Executing fsck_hfs (version hfs-277.10.5).
[20:50:15.0138] ** Checking Journaled HFS Plus volume.
[20:50:15.0138] ** Detected a case-sensitive volume.
[20:50:15.0138]    The volume name is System
[20:50:15.0138] ** Checking extents overflow file.
[20:50:15.0138] ** Checking catalog file.
[20:50:15.0138] ** Checking multi-linked files.
[20:50:15.0138] ** Checking catalog hierarchy.
[20:50:15.0138] ** Checking extended attributes file.
[20:50:15.0138] ** Checking volume bitmap.
[20:50:15.0138] ** Checking volume information.
[20:50:15.0138] ** Trimming unused blocks.
[20:50:15.0138] ** The volume System appears to be OK.
[20:50:15.0138] executing /sbin/mount_hfs
[20:50:15.0138] /dev/disk0s1s1 mounted on /mnt1
[20:50:15.0138] executing /sbin/fsck_hfs
[20:50:15.0138] ** /dev/rdisk0s1s2
[20:50:15.0138]    Executing fsck_hfs (version hfs-277.10.5).
[20:50:15.0138] ** Checking Journaled HFS Plus volume.
[20:50:15.0138] ** Detected a case-sensitive volume.
[20:50:15.0138]    The volume name is Data
[20:50:15.0138] ** Checking extents overflow file.
[20:50:15.0138] ** Checking catalog file.
[20:50:15.0138] ** Checking multi-linked files.
[20:50:15.0138] ** Checking catalog hierarchy.
[20:50:15.0138] ** Checking extended attributes file.
[20:50:15.0138] ** Checking volume bitmap.
[20:50:15.0138] ** Checking volume information.
[20:50:15.0138] ** Trimming unused blocks.
[20:50:15.0138] ** The volume Data appears to be OK.
[20:50:15.0138] executing /sbin/mount_hfs
[20:50:15.0138] mount_hfs: Could not exec re-keying daemon /usr/libexec/rolld: No such file or directory
[20:50:15.0138] /dev/disk0s1s2 mounted on /mnt2
[20:50:15.0138] entering resize_system_partition_to_options
[20:50:15.0138] User specified system partition size, skipping firmware extras size.
[20:50:15.0138] Found SystemPartitionPadding value of 167772160 bytes
[20:50:15.0138] Erasing system partition prior to resize operation.
[20:50:15.0138] block size for /dev/disk0s1s1: 8192
[20:50:15.0138] /sbin/newfs_hfs -s -v System -J -b 8192 -n a=8192,c=8192,e=8192 /dev/disk0s1s1
[20:50:15.0138] executing /sbin/newfs_hfs -s -v System -J -b 8192 -n a=8192,c=8192,e=8192 /dev/disk0s1s1
[20:50:15.0138] Initialized /dev/rdisk0s1s1 as a 2 GB case-sensitive HFS Plus volume with a 8192k journal
[20:50:15.0138] executing /sbin/fsck_hfs
[20:50:15.0138] ** /dev/rdisk0s1s1
[20:50:15.0138]    Executing fsck_hfs (version hfs-277.10.5).
[20:50:15.0138] ** Checking Journaled HFS Plus volume.
[20:50:15.0138] ** Detected a case-sensitive volume.
[20:50:15.0138]    The volume name is System
[20:50:15.0138] ** Checking extents overflow file.
[20:50:15.0138] ** Checking catalog file.
[20:50:15.0138] ** Checking multi-linked files.
[20:50:15.0138] ** Checking catalog hierarchy.
[20:50:15.0138] ** Checking extended attributes file.
[20:50:15.0138] ** Checking volume bitmap.
[20:50:15.0138] ** Checking volume information.
[20:50:15.0138] ** Trimming unused blocks.
[20:50:15.0138] ** The volume System appears to be OK.
[20:50:15.0138] executing /sbin/mount_hfs
[20:50:15.0138] /dev/disk0s1s1 mounted on /mnt1
[20:50:15.0138] Trying to resize system partition to 1773142016 bytes aka 1691 MB
[20:50:15.0138] entering adjust_partition_preflight
[20:50:15.0138] partition:0 requiredSize=216448
[20:50:15.0138] no change in size
[20:50:15.0138] Successfully resized the system partition
[20:50:15.0138] entering maximize_data_partition
[20:50:15.0138] entering adjust_partition_preflight
[20:50:15.0138] partition:1 requiredSize=<<<<<IMEI>>>>>>8
[20:50:15.0138] maximizing data partition to 14181990399 bytes
[20:50:15.0138] entering adjust_partition_preflight
[20:50:15.0138] partition:1 requiredSize=1731200
[20:50:15.0138] no change in size
[20:50:15.0138] Successfully resized data partition to consume free blocks
[20:50:15.0138] The system partition now has a total HFS+ capacity of 1691 MB
[20:50:15.0138] entering ramrod_probe_media
[20:50:15.0138] device partitioning scheme is GPT
[20:50:15.0138] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
[20:50:15.0138] entering unmount_filesystems
[20:50:15.0138] entering ramrod_ticket_update
[20:50:15.0138] looking up root ticket hash
[20:50:15.0138] device tree ticket-hash: <CFData 0xe79d80 [0x2f2ae0]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
[20:50:15.0138] ticket_hash: <<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>
[20:50:15.0138] received valid ticket (2741 bytes)
[20:50:15.0138] entering restore_images
[20:50:15.0138] Successfully marked device node /dev/rdisk0s1s1 as static data
[20:50:15.0138] executing /usr/sbin/asr -source asr://localhost:12345 -target /dev/disk0s1s1 -erase -noprompt --chunkchecksum --puppetstrings
[20:50:15.0138] void AppleUSBDeviceMux::handleConnectResult(struct BulkUSBMuxSession *, errno_t) new session to port 12345 failed: 61
[20:50:15.0138] void AppleUSBDeviceMux::handleConnectResult(struct BulkUSBMuxSession *, errno_t) new session to port 12345 failed: 61
[20:50:15.0138] ASR: asr: Unable to disable idle sleep - -536870199
[20:50:15.0138] ASR STATUS: start 241.1 multicast-client
[20:50:15.0138] ASR: Waiting for connection attempt from server
[20:50:15.0138] AppleUSBDeviceMux::handleConnectResult new session 0x952130b0 established 12345<-lo0->49168 12345<-usb->8960
[20:50:15.0138] ASR STATUS: setup
[20:50:15.0138] ASR: Validating target...done
[20:50:15.0138] ASR STATUS: metadata
[20:50:15.0138] ASR: Validating source...
[20:50:15.0138] ASR: done
[20:50:15.0138] ASR: Retrieving scan information...done
[20:50:15.0138] ASR: Validating sizes...done
[20:50:15.0138] ASR STATUS: restore
[20:50:15.0138] ASR RESTORE PROGRESS: 2%
[20:50:15.0138] ASR RESTORE PROGRESS: 4%
[20:50:15.0138] ASR RESTORE PROGRESS: 6%
[20:50:15.0138] ASR RESTORE PROGRESS: 8%
[20:50:15.0138] ASR RESTORE PROGRESS: 10%
[20:50:15.0138] ASR RESTORE PROGRESS: 12%
[20:50:15.0138] ASR RESTORE PROGRESS: 14%
[20:50:15.0138] ASR RESTORE PROGRESS: 16%
[20:50:15.0138] ASR RESTORE PROGRESS: 18%
[20:50:15.0138] ASR RESTORE PROGRESS: 20%
[20:50:15.0138] ASR RESTORE PROGRESS: 22%
[20:50:15.0138] ASR RESTORE PROGRESS: 24%
[20:50:15.0138] ASR RESTORE PROGRESS: 26%
[20:50:15.0138] ASR RESTORE PROGRESS: 28%
[20:50:15.0138] ASR RESTORE PROGRESS: 30%
[20:50:15.0138] ASR RESTORE PROGRESS: 32%
[20:50:15.0138] ASR RESTORE PROGRESS: 34%
[20:50:15.0138] ASR RESTORE PROGRESS: 36%
[20:50:15.0138] ASR RESTORE PROGRESS: 38%
[20:50:15.0138] ASR RESTORE PROGRESS: 40%
[20:50:15.0138] ASR RESTORE PROGRESS: 42%
[20:50:15.0138] ASR RESTORE PROGRESS: 44%
[20:50:15.0138] ASR RESTORE PROGRESS: 46%
[20:50:15.0138] ASR RESTORE PROGRESS: 48%
[20:50:15.0138] ASR RESTORE PROGRESS: 50%
[20:50:15.0138] ASR RESTORE PROGRESS: 52%
[20:50:15.0138] ASR RESTORE PROGRESS: 54%
[20:50:15.0138] ASR RESTORE PROGRESS: 56%
[20:50:15.0138] ASR RESTORE PROGRESS: 58%
[20:50:15.0138] ASR RESTORE PROGRESS: 60%
[20:50:15.0138] ASR RESTORE PROGRESS: 62%
[20:50:15.0138] ASR RESTORE PROGRESS: 64%
[20:50:15.0138] ASR RESTORE PROGRESS: 66%
[20:50:15.0138] ASR RESTORE PROGRESS: 68%
[20:50:15.0138] ASR RESTORE PROGRESS: 70%
[20:50:15.0138] ASR RESTORE PROGRESS: 72%
[20:50:15.0138] ASR RESTORE PROGRESS: 74%
[20:50:15.0138] ASR RESTORE PROGRESS: 76%
[20:50:15.0138] ASR RESTORE PROGRESS: 78%
[20:50:15.0138] ASR RESTORE PROGRESS: 80%
[20:50:15.0138] ASR RESTORE PROGRESS: 82%
[20:50:15.0138] ASR RESTORE PROGRESS: 84%
[20:50:15.0138] ASR RESTORE PROGRESS: 86%
[20:50:15.0138] ASR RESTORE PROGRESS: 88%
[20:50:15.0138] ASR RESTORE PROGRESS: 90%
[20:50:15.0138] ASR RESTORE PROGRESS: 92%
[20:50:15.0138] ASR RESTORE PROGRESS: 94%
[20:50:15.0138] ASR RESTORE PROGRESS: 96%
[20:50:15.0138] ASR RESTORE PROGRESS: 98%
[20:50:15.0138] AppleUSBDeviceMux::sessionUpcall socket is closed, session 0x952130b0 (12345<-lo0->49168 12345<-usb->8960)
[20:50:15.0138] ASR RESTORE PROGRESS: 100%
[20:50:15.0138] ASR: Copied 1605403136 bytes in 197.51 seconds, 7937.88 KiB/s
[20:50:15.0138] ASR STATUS: verify
[20:50:15.0138] ASR VERIFY PROGRESS: 2%
[20:50:15.0138] ASR VERIFY PROGRESS: 4%
[20:50:15.0138] ASR VERIFY PROGRESS: 6%
[20:50:15.0138] ASR VERIFY PROGRESS: 8%
[20:50:15.0138] ASR VERIFY PROGRESS: 10%
[20:50:15.0138] ASR VERIFY PROGRESS: 12%
[20:50:15.0138] ASR VERIFY PROGRESS: 14%
[20:50:15.0138] ASR VERIFY PROGRESS: 16%
[20:50:15.0138] ASR VERIFY PROGRESS: 18%
[20:50:15.0138] ASR VERIFY PROGRESS: 20%
[20:50:15.0138] ASR VERIFY PROGRESS: 22%
[20:50:15.0138] ASR VERIFY PROGRESS: 24%
[20:50:15.0138] ASR VERIFY PROGRESS: 26%
[20:50:15.0138] ASR VERIFY PROGRESS: 28%
[20:50:15.0138] ASR VERIFY PROGRESS: 30%
[20:50:15.0138] ASR VERIFY PROGRESS: 32%
[20:50:15.0138] ASR VERIFY PROGRESS: 34%
[20:50:15.0138] ASR VERIFY PROGRESS: 36%
[20:50:15.0138] ASR VERIFY PROGRESS: 38%
[20:50:15.0138] ASR VERIFY PROGRESS: 40%
[20:50:15.0138] ASR VERIFY PROGRESS: 42%
[20:50:15.0138] ASR VERIFY PROGRESS: 44%
[20:50:15.0138] ASR VERIFY PROGRESS: 46%
[20:50:15.0138] ASR VERIFY PROGRESS: 48%
[20:50:15.0138] ASR VERIFY PROGRESS: 50%
[20:50:15.0138] ASR VERIFY PROGRESS: 52%
[20:50:15.0138] ASR VERIFY PROGRESS: 54%
[20:50:15.0138] ASR VERIFY PROGRESS: 56%
[20:50:15.0138] ASR VERIFY PROGRESS: 58%
[20:50:15.0138] ASR VERIFY PROGRESS: 60%
[20:50:15.0138] ASR VERIFY PROGRESS: 62%
[20:50:15.0138] ASR VERIFY PROGRESS: 64%
[20:50:15.0138] ASR VERIFY PROGRESS: 66%
[20:50:15.0138] ASR VERIFY PROGRESS: 68%
[20:50:15.0138] ASR VERIFY PROGRESS: 70%
[20:50:15.0138] ASR VERIFY PROGRESS: 72%
[20:50:15.0138] ASR VERIFY PROGRESS: 74%
[20:50:15.0138] ASR VERIFY PROGRESS: 76%
[20:50:15.0138] ASR VERIFY PROGRESS: 78%
[20:50:15.0138] ASR VERIFY PROGRESS: 80%
[20:50:15.0138] ASR VERIFY PROGRESS: 82%
[20:50:15.0138] ASR VERIFY PROGRESS: 84%
[20:50:15.0138] ASR VERIFY PROGRESS: 86%
[20:50:15.0138] ASR VERIFY PROGRESS: 88%
[20:50:15.0138] ASR VERIFY PROGRESS: 90%
[20:50:15.0138] ASR VERIFY PROGRESS: 92%
[20:50:15.0138] ASR VERIFY PROGRESS: 94%
[20:50:15.0138] ASR VERIFY PROGRESS: 96%
[20:50:15.0138] ASR VERIFY PROGRESS: 98%
[20:50:15.0138] ASR VERIFY PROGRESS: 100%
[20:50:15.0138] ASR: Verified SHA-1 checksum 1605403136 bytes in 40.96 seconds, 38271.93 KiB/s
[20:50:15.0138] ASR STATUS: finish
[20:50:15.0138] entering ramrod_probe_media
[20:50:15.0138] device partitioning scheme is GPT
[20:50:15.0138] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
[20:50:15.0138] entering mount_filesystems
[20:50:15.0138] executing /sbin/fsck_hfs
[20:50:15.0138] ** /dev/rdisk0s1s1
[20:50:15.0138]    Executing fsck_hfs (version hfs-277.10.5).
[20:50:15.0138] ** Checking Journaled HFS Plus volume.
[20:50:15.0138] ** Detected a case-sensitive volume.
[20:50:15.0138]    The volume name is Sochi11D257.N90OS
[20:50:15.0138] ** Checking extents overflow file.
[20:50:15.0138] ** Checking catalog file.
[20:50:15.0138] ** Checking multi-linked files.
[20:50:15.0138] ** Checking catalog hierarchy.
[20:50:15.0138] ** Checking extended attributes file.
[20:50:15.0138] ** Checking volume bitmap.
[20:50:15.0138] ** Checking volume information.
[20:50:15.0138] ** Trimming unused blocks.
[20:50:15.0138] ** The volume Sochi11D257.N90OS appears to be OK.
[20:50:15.0138] executing /sbin/mount_hfs
[20:50:15.0138] /dev/disk0s1s1 mounted on /mnt1
[20:50:15.0138] executing /sbin/fsck_hfs
[20:50:15.0138] ** /dev/rdisk0s1s2
[20:50:15.0138]    Executing fsck_hfs (version hfs-277.10.5).
[20:50:15.0138] ** Checking Journaled HFS Plus volume.
[20:50:15.0138] ** Detected a case-sensitive volume.
[20:50:15.0138]    The volume name is Data
[20:50:15.0138] ** Checking extents overflow file.
[20:50:15.0138] ** Checking catalog file.
[20:50:15.0138] ** Checking multi-linked files.
[20:50:15.0138] ** Checking catalog hierarchy.
[20:50:15.0138] ** Checking extended attributes file.
[20:50:15.0138] ** Checking volume bitmap.
[20:50:15.0138] ** Checking volume information.
[20:50:15.0138] ** Trimming unused blocks.
[20:50:15.0138] ** The volume Data appears to be OK.
[20:50:15.0138] executing /sbin/mount_hfs
[20:50:15.0138] mount_hfs: Could not exec re-keying daemon /usr/libexec/rolld: No such file or directory
[20:50:15.0138] /dev/disk0s1s2 mounted on /mnt2
[20:50:15.0138] entering install_kernel_cache
[20:50:15.0138] writing kernelcache to /mnt1/System/Library/Caches/com.apple.kernelcaches/kernelcache
[20:50:15.0138] entering install_secure_vault_daemon
[20:50:15.0138] entering get_hardware_platform
[20:50:15.0138] platform-name = s5l8930x
[20:50:15.0138] linking /mnt1/usr/sbin/securekeyvaultd to /mnt1/usr/sbin/securekeyvaultd.s5l8930x
[20:50:15.0138] no securekeyvaultd for s5l8930x
[20:50:15.0138] entering ramrod_ticket_write
[20:50:15.0138] writing ticket to /mnt1/System/Library/Caches/apticket.der
[20:50:15.0138] entering update_device_firmware
[20:50:15.0138] create_baseband_update_options: Got imeisv: 22
[20:50:15.0138] baseband updater options = <CFBasicHash 0xe773a0 [0x2f2ae0]>{type = mutable dict, count = 3,
[20:50:15.0138] entries =>
[20:50:15.0138] 0 : <CFString 0xec298 [0x2f2ae0]>{contents = "IMEISwVersion"} = <CFNumber 0xe7a7e0 [0x2f2ae0]>{value = +22, type = kCFNumberSInt32Type}
[20:50:15.0138] 1 : <CFString 0xec2f8 [0x2f2ae0]>{contents = "autoSetupEnv"} = <CFBoolean 0x2f2e98 [0x2f2ae0]>{value = false}
[20:50:15.0138] 2 : <CFString 0xec308 [0x2f2ae0]>{contents = "disablePing"} = <CFBoolean 0x2f2e90 [0x2f2ae0]>{value = true}
[20:50:15.0138] }
[20:50:15.0138]
[20:50:15.0138] _baseband_update_requires_system_filesystem_once: querying baseband to determine if it requires system filesystem
[20:50:15.0138] _baseband_update_requires_system_filesystem_once: query returned <CFBasicHash 0xe7a480 [0x2f2ae0]>{type = immutable dict, count = 1,
[20:50:15.0138] entries =>
[20:50:15.0138] 0 : <CFString 0xec068 [0x2f2ae0]>{contents = "requireSystemPartitionMount"} = <CFBoolean 0x2f2e98 [0x2f2ae0]>{value = false}
[20:50:15.0138] }
[20:50:15.0138]
[20:50:15.0138] entering update_iBoot
[20:50:15.0138] found 'AppleImage3NORAccess' object in IORegistry
[20:50:15.0138] entering update_iBoot_image3_NOR_access
[20:50:15.0138] write_image3_data: flashing illb data (length = 0x209d9)
[20:50:15.0138] write_image3_data: flashing SCAB data (length = 0xb00)
[20:50:15.0138] ticket updated
[20:50:15.0138] write_image3_data: flashing ibot data (length = 0x4518c)
[20:50:15.0138] write_image3_data: flashing chg1 data (length = 0x88cc)
[20:50:15.0138] write_image3_data: flashing bat0 data (length = 0xaa4c)
[20:50:15.0138] write_image3_data: flashing batF data (length = 0x1484c)
[20:50:15.0138] write_image3_data: flashing logo data (length = 0x1a8c)
[20:50:15.0138] write_image3_data: flashing recm data (length = 0x10f4c)
[20:50:15.0138] write_image3_data: flashing dtre data (length = 0x1240c)
[20:50:15.0138] write_image3_data: flashing chg0 data (length = 0x260c)
[20:50:15.0138] write_image3_data: flashing bat1 data (length = 0x80c)
[20:50:15.0138] write_image3_data: flashing glyP data (length = 0x2e4c)
[20:50:15.0138] AppleImage3NORAccess::_getSuperBlock imageVersion: 3
[20:50:15.0138] AppleImage3NORAccess::_getSuperBlock imageVersion: 3
[20:50:15.0138] [nand_part_core:INF@2289] first 2 pages of boot blocks written with copies of partition table
[20:50:15.0138] entering update_gas_gauge
[20:50:15.0138] entering update_ir_mcu
[20:50:15.0138] looking for mcu nub...no entry from path!
[20:50:15.0138] TiSerialFlasher not supported on this platform. Exiting.
[20:50:15.0138] entering update_baseband
[20:50:15.0138] update_baseband: registering for progress notifications
[20:50:15.0138] create_baseband_update_options: Got imeisv: 22
[20:50:15.0138] baseband updater options = <CFBasicHash 0xe7af30 [0x2f2ae0]>{type = mutable dict, count = 6,
[20:50:15.0138] entries =>
[20:50:15.0138] 0 : <CFString 0xec248 [0x2f2ae0]>{contents = "SystemRoot"} = <CFString 0xe76c40 [0x2f2ae0]>{contents = "/mnt1"}
[20:50:15.0138] 1 : <CFString 0xec298 [0x2f2ae0]>{contents = "IMEISwVersion"} = <CFNumber 0xe75180 [0x2f2ae0]>{value = +22, type = kCFNumberSInt32Type}
[20:50:15.0138] 2 : <CFString 0xec2f8 [0x2f2ae0]>{contents = "autoSetupEnv"} = <CFBoolean 0x2f2e98 [0x2f2ae0]>{value = false}
[20:50:15.0138] 3 : <CFString 0xec1d8 [0x2f2ae0]>{contents = "forceUpdate"} = <CFBoolean 0x2f2e90 [0x2f2ae0]>{value = true}
[20:50:15.0138] 5 : <CFString 0xec308 [0x2f2ae0]>{contents = "disablePing"} = <CFBoolean 0x2f2e90 [0x2f2ae0]>{value = true}
[20:50:15.0138] 6 : <CFString 0xec1f8 [0x2f2ae0]>{contents = "DisallowFusiing"} = <CFBoolean 0x2f2e90 [0x2f2ae0]>{value = true}
[20:50:15.0138] }
[20:50:15.0138]
[20:50:15.0138] update_baseband: querying baseband info
[20:50:15.0138] bbupdater: Opening device path /dev/cu.debug, using baud 115200
[20:50:15.0138] bbupdater: Configuring Hardware Mux...bbupdater: OK
[20:50:15.0138] bbupdater: [    714981.281435 : 13.00]::: powercycle
[20:50:15.0138] bbupdater: - Ping failed, trying again, 48 tries left
[20:50:15.0138] bbupdater: - Ping OK
[20:50:15.0138] bbupdater: [    714982.987679 : 13.01]::: Polled 1
[20:50:15.0138] bbupdater: Opening device path /dev/cu.debug, using baud 115200
[20:50:15.0138] bbupdater: [    714

Hi Md. Abdur Rahman,
Thanks for participating in the Apple Support Communities.
If your iPhone 4 is restarting unexpectedly, there are a few things to do depending on how frequently this is happening.
If it is restarting intermittently (from time to time), you may want to back up your data and restore the iPhone to factory settings:
Use iTunes to restore your iOS device to factory settings - Apple Support
If the same thing occurs, this article suggests contacting Apple Support for more help:
If your iOS device restarts, displays the Apple logo, or powers off while you're using it - Apple Support
Make sure your iOS device is up to date. If you still see this issue after updating, contact Apple Support.
Sincerely,
Jeremy

Problems upgrading iphone on PC

Every time I try to upgrade my iphone 4 software on my PC I get a message "network connection timed out. Check your network settings" Can't figure out what it could be. Any suggestions?

A simple search of the forums would have revealed this is a common issue and provided a solution.
Temporarily disable any Anti-Virus and Firewall software on the comptuer then try the upgrade again.

Problem updating iphone software to 3.0.1

hi this is kunal here . i am trying to update my iphone to 3.0.1 but again and again i get a message unknown error , check your network settings , i tried many times and i am sure that there is no problem in internet connection .
i am not getting it is there a problem with itune or iphone , my i tune is a updated version.
i am really ****** from apple first no support for india every thing these guys do thats always for united states and canada.

Try temporarily disabling your firewall and anti virus software and try again...
See here for Connection Issues
http://support.apple.com/kb/TS1379
From Here
http://www.apple.com/support/itunes/troubleshooting/

How long to upgrade iphone software to Version 4

My iphone has Version 3.1.3 and I am attempting to upgrade to Version 4 but the back up phase of the upgrade appears to be taking forever.
My iphone has a capacity of 14.28GB, with 12.02GB free so there should not be too much data to back up, yet it seems to be stuck in the back up phase.

I just left my iphone slowly working through and am pleased to say that after a considerable time (not sure how long as I gave up on it and went to watch a movie)it managed to get through the process and now appears to be up and running with the new software.

ITunes cannot upgrade iphone software.

Whenever I try and do an upgrade to my iPhone, iTunes seems to always get almost to the end of the update and then freezes. This has happened with version 10 and previous versions as well.
I am using Snow Leopard 10.6.4.
Do I need to re-install itunes? If so how?
Thanks and I look forward to your advice on this issue.

It depends on which iMac you have. If it is a PPC (G4 or G5) iMac you cannpt upgrade beyond Leopard 10.5.8, and you cannot synch with an iPhone 5.
If it an Intel iMac you need to first purchase Snow Leopard 10.6 and update iTunes:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
(NB: PowerPC applications can still be run in Snow Leopard using Rosetta, but they will not work in later versions of OS X.)
The OS 10.6 Snow Leopard install DVD is available for $19.99 from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and in the UK:
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8, or download the combo update from here:
http://support.apple.com/kb/DL1399
Check via Software Update whether any further updates are required, particularly to iTunes.
You should now see the App Store icon in iTunes, and you now need to set up your account:
http://support.apple.com/kb/HT4479
You can now upgrade to Mavericks OS 10.9 for free IF you have one of the following Macs, with not less than 2GB of RAM, and at least 8GB of available space on your hard drive:
iMac (Mid-2007 or later)
MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
MacBook Pro (13-inch, Mid-2009 or later), (15-inch, Mid/Late 2007 or later), (17-inch, Late 2007 or later)
MacBook Air (Late 2008 or later)
Mac Mini (Early 2009 or later)
Mac Pro (Early 2008 or later)
Xserve (Early 2009)
If you cannot run Mavericks you can purchase the code to use to download Lion from the App Store (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard):
http://store.apple.com/us/product/D6106Z/A/os-x-lion
or Mountain Lion:
http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion

Error 1604 - upgrading iPhone software

I am upgrading my iPhone to the new software. Had to restart 2x before the phone was recognized in iTunes. Once it was recognized, the software download was prompted and I began the download. I got an error and was told I had to restore the phone. Begrudgingly selected to Restore and the error 1604 came up. The phone is now black screen and I can not get it to come on. The phone is not recognized in ITunes.
Help.

You might want to read through this forum:
http://discussions.apple.com/thread.jspa?messageID=5439212
or do a google search for iPhone Error 1604 and you will find hundreds of threads on it.

Problems upgrading iphone software

Similar Messages

Maybe you are looking for