Problems upgrading to CR 2008
Post Author: tegage
CA Forum: General
I have an application that was succesfully using the embedded version of CR (VS 2005). I upgraded to CR 2008 so that I could reorder parameters. The conversion seemed to go well and all runs fine in Visusal Studio, but when running the deployed application, the upgraded reports don't run.
I have tried this on my development machine and another non-development machine. I put the CR 2008 runtime on the non-development PC and tried it both ways on the development machine. Here is the error I get: http://screencast.com/t/1N3Q9o2N
Any ideas - I have blown about 3 days on this and am ready to give up
Post Author: tegage
CA Forum: General
Found the problem. It appears as if CR 2008 requires the "Allow this precompiled site to be updatable" option to be checked. A workaround to this who don't want the option checked is to publish twice to two different directories and copy the CR 2008 reports from the "checked" directory to the "unchecked" directory.
Similar Messages
-
Problems w/MS Office 2008 & Google Earth Ever Since Snow Leopard "Upgrade"
I probably should have checked this forum before taking my son's advice to upgrade from 10.5 to 10.6. Ever since this upgrade, I've had repeated and frustrating problems with two applications: MS Office 2008 for the Mac and Google Earth for the Mac.
Note that I did an "in-place" upgrade from Leopard to Snow Leopard, i.e., I inserted the installation DVD into my iMac and then double-clicked on "Install Mac OS X".
Office 2008: Ever since the Snow Leopard upgrade, MS Office 2008 has been crashing. Typically, it's Entourage crashing when a crash does occur because that's the office app that I run 95% of the time. However, whenever Entourage crashes and I try to launch Word, Excel, or PowerPoint, they won't launch either... The icons will bounce a few times in the dock but won't run. (The Entourage crash is the only Office App that actually generates a crash window.) Note that there are two identities configured on my iMac, both of which which use Entourage. The key thing about this situation is that when the Office 2008 crash does occur, restarting the iMac ALWAYS resolves the problem until the next time a crash occurs. I've tried to determine what combination of events, i.e., apps open/being used in either/both identities, etc. is the trigger, but I can't find anything obvious. Sometimes I can use the iMac for a whole day without a crash, but that's unusual. If Entourage is left open in both identities, maybe a couple of days will pass without a crash, but invariably it happens again, and then it's reboot time again. In cases where Entourage is left running (in one or both identities), we will still eventually get a crash in one of them if one of us tries to open a WinWord attachment (with a "Not enough memory to run Word" error). If at that point I close Entourage and try to restart it, it crashes. I've tried everything I could find on the Office for the Mac forums, including deleting duplicate fonts, doing a safe start-up, fixing disk permissions via Disk Utility, zapping the PRAM, turning filing sharing off then on (including deleting everything listed in the Shared Folders section), logging out/logging back in, etc., all to no avail. One of the Office 2008 for the Mac forum contributors suggested that the problem was with my Snow Leopard Install, but then a contributor to another more general Apple forum blames Office for Mac. (This is exactly the sort of finger-pointing exercise that I'd hoped to avoid when I made the plunge from being a long-time Windows user to becoming an OS X user...; - )
Google Earth: This just flat-out WILL NOT RUN ever since I upgraded to Snow Leopard. When I try to run it, it bounces in the dock for about a minute then just stops, staying fixed to the dock until I do a Force-Quit. (I don't have it permanently tethered to the dock since I only use it occasionally.) I've tried deleting/reinstalling, including Google Earth's suggestions to remove files from my identity's Google Earth folder in the Library folder, but no dice.
My take on all of this is that despite all of Apple's advertising to the contrary, their OS (including updates to their OS) isn't necessarily as trouble-free/stable as their anti-Windows spots would have you believe. Sorry for this long post, but any help would be much appreciated.I left my system running all day in 64-bit kernel mode. (I left Entourage running the whole time.) Just now closed Entourage and tried reopening it. Same deal with Google Earth. They both crashed. Here's a screen paste of the entire Microsoft crash log for Entourage:
Microsoft Error Reporting log version: 2.0
Error Signature:
Exception: EXCBADACCESS
Date/Time: 2010-01-29 16:28:12 -0500
Application Name: Microsoft Entourage
Application Bundle ID: com.microsoft.Entourage
Application Signature: OPIM
Application Version: 12.2.3.091001
Crashed Module Name: EntourageCore
Crashed Module Version: unknown
Crashed Module Offset: 0x00015ef4
Blame Module Name: EntourageCore
Blame Module Version: unknown
Blame Module Offset: 0x00015ef4
Application LCID: 1033
Extra app info: Reg=en Loc=0x0409
Thread 0 crashed:
# 1 0x0146cef4 in UContactUtils::GetMeContactID() + 0x00000014 (EntourageCore + 0x00015ef4)
# 2 0x00028ac1 in _mh_executeheader + 0x00027AC1 (Microsoft Entourage + 0x00027ac1)
# 3 0x00029df4 in _mh_executeheader + 0x00028DF4 (Microsoft Entourage + 0x00028df4)
# 4 0x0002a439 in _mh_executeheader + 0x00029439 (Microsoft Entourage + 0x00029439)
# 5 0x000191a4 in _mh_executeheader + 0x000181A4 (Microsoft Entourage + 0x000181a4)
# 6 0x00019ace in _mh_executeheader + 0x00018ACE (Microsoft Entourage + 0x00018ace)
# 7 0x0000264e in _mh_executeheader + 0x0000164E (Microsoft Entourage + 0x0000164e)
# 8 0x00002575 in _mh_executeheader + 0x00001575 (Microsoft Entourage + 0x00001575)
X86 Thread State:
eax: 0x00000000 ebx: 0x0146ceec ecx: 0x00000002 edx:0xbffff39c
edi: 0x29a3ced0 esi: 0x02620ac8 ebp: 0xbffff2c8 esp:0xbffff2b0
ss: 0x00000023 eip: 0x0146cef4 cs: 0x0000001b ds:0x00000023
es: 0x00000023 fs: 0x00000000 gs: 0x0000000f eflags:0x00010282
Thread 1:
# 1 0x93f900ea in _dispatch_hwconfig + 0x93DD3162 (libSystem.B.dylib + 0x000270ea)
# 2 0x93f8fcc3 in _dispatch_hwconfig + 0x93DD2D3B (libSystem.B.dylib + 0x00026cc3)
# 3 0x93f8fa68 in _dispatch_hwconfig + 0x93DD2AE0 (libSystem.B.dylib + 0x00026a68)
# 4 0x93f8f4f1 in _dispatch_hwconfig + 0x93DD2569 (libSystem.B.dylib + 0x000264f1)
# 5 0x93f8f336 in _dispatch_hwconfig + 0x93DD23AE (libSystem.B.dylib + 0x00026336)
X86 Thread State:
eax: 0x0000016b ebx: 0x93f9073e ecx: 0xb0080d5c edx:0x93f900ea
edi: 0xa04131ac esi: 0xb0080ed8 ebp: 0xb0080ef8 esp:0xb0080d5c
ss: 0x00000023 eip: 0x93f900ea cs: 0x0000000b ds:0x00000023
es: 0x00000023 fs: 0x00000023 gs: 0x0000000f eflags:0x00000246
Thread 2:
# 1 0x93f8f182 in _dispatch_hwconfig + 0x93DD21FA (libSystem.B.dylib + 0x00026182)
# 2 0x93f8f336 in _dispatch_hwconfig + 0x93DD23AE (libSystem.B.dylib + 0x00026336)
X86 Thread State:
eax: 0x00100170 ebx: 0x93f8f379 ecx: 0xb0102f6c edx:0x93f8f182
edi: 0x02820418 esi: 0xb0103000 ebp: 0xb0102fc8 esp:0xb0102f6c
ss: 0x00000023 eip: 0x93f8f182 cs: 0x0000000b ds:0x00000023
es: 0x00000023 fs: 0x00000023 gs: 0x0000000f eflags:0x00000286
Thread 3:
# 1 0x93f699ee in _dispatch_hwconfig + 0x93DACA66 (libSystem.B.dylib + 0x000009ee)
# 2 0x9400a12c in _dispatch_hwconfig + 0x93E4D1A4 (libSystem.B.dylib + 0x000a112c)
# 3 0x021bbd7d in _MerpCreateSession + 0x00000B07 (merp + 0x00002d7d)
# 4 0x021bb3e5 in _MerpCreateSession + 0x0000016F (merp + 0x000023e5)
# 5 0x021bb46c in _MerpCreateSession + 0x000001F6 (merp + 0x0000246c)
# 6 0x021bbf25 in _MerpCreateSession + 0x00000CAF (merp + 0x00002f25)
# 7 0x93f96fbd in _dispatch_hwconfig + 0x93DDA035 (libSystem.B.dylib + 0x0002dfbd)
# 8 0x93f96e42 in _dispatch_hwconfig + 0x93DD9EBA (libSystem.B.dylib + 0x0002de42)
X86 Thread State:
eax: 0xffffffa6 ebx: 0x93ff18a0 ecx: 0xb0184a6c edx:0x93f699ee
edi: 0x00001b59 esi: 0x58a9e28c ebp: 0xb0184ad8 esp:0xb0184a6c
ss: 0x00000023 eip: 0x93f699ee cs: 0x0000000b ds:0x00000023
es: 0x00000023 fs: 0x00000023 gs: 0x0000000f eflags:0x00000206
Thread 4:
# 1 0x93f8f182 in _dispatch_hwconfig + 0x93DD21FA (libSystem.B.dylib + 0x00026182)
# 2 0x93f8f336 in _dispatch_hwconfig + 0x93DD23AE (libSystem.B.dylib + 0x00026336)
X86 Thread State:
eax: 0x00100170 ebx: 0x93f8f379 ecx: 0xb0291f6c edx:0x93f8f182
edi: 0x028204c0 esi: 0xb0292000 ebp: 0xb0291fc8 esp:0xb0291f6c
ss: 0x00000023 eip: 0x93f8f182 cs: 0x0000000b ds:0x00000023
es: 0x00000023 fs: 0x00000023 gs: 0x0000000f eflags:0x00000286
Thread 5:
# 1 0x9403155a in _dispatch_hwconfig + 0x93E745D2 (libSystem.B.dylib + 0x000c855a)
# 2 0x010e3b76 in _FWaitForConnection + 0x0000002A (MicrosoftComponentPlugin + 0x00174b76)
# 3 0x00fefb50 in _McpFInitNetworkPIDChecking + 0x0000111C (MicrosoftComponentPlugin + 0x00080b50)
# 4 0x91ccd7ae in __gTECMasterGlobals + 0x919A184A (CarbonCore + 0x000267ae)
# 5 0x93f96fbd in _dispatch_hwconfig + 0x93DDA035 (libSystem.B.dylib + 0x0002dfbd)
# 6 0x93f96e42 in _dispatch_hwconfig + 0x93DD9EBA (libSystem.B.dylib + 0x0002de42)
X86 Thread State:
eax: 0x000c0194 ebx: 0x00fefaff ecx: 0xb020fd4c edx:0x9403155a
edi: 0x04000000 esi: 0xb020ff34 ebp: 0xb020fd68 esp:0xb020fd4c
ss: 0x00000023 eip: 0x9403155a cs: 0x0000000b ds:0x00000023
es: 0x00000023 fs: 0x00000023 gs: 0x0000000f eflags:0x00000286
Thread 6:
# 1 0x93fa46ca in _dispatch_hwconfig + 0x93DE7742 (libSystem.B.dylib + 0x0003b6ca)
# 2 0x010e3c01 in _FReceiveMessage + 0x00000077 (MicrosoftComponentPlugin + 0x00174c01)
# 3 0x00fef7fe in _McpFInitNetworkPIDChecking + 0x00000DCA (MicrosoftComponentPlugin + 0x000807fe)
# 4 0x91ccd7ae in __gTECMasterGlobals + 0x919A184A (CarbonCore + 0x000267ae)
# 5 0x93f96fbd in _dispatch_hwconfig + 0x93DDA035 (libSystem.B.dylib + 0x0002dfbd)
# 6 0x93f96e42 in _dispatch_hwconfig + 0x93DD9EBA (libSystem.B.dylib + 0x0002de42)
X86 Thread State:
eax: 0x00000193 ebx: 0x00fef76f ecx: 0xb0313cbc edx:0x93fa46ca
edi: 0xb0313ed4 esi: 0xb0313f44 ebp: 0xb0313ce8 esp:0xb0313cbc
ss: 0x00000023 eip: 0x93fa46ca cs: 0x0000000b ds:0x00000023
es: 0x00000023 fs: 0x00000023 gs: 0x0000000f eflags:0x00000286
Thread 7:
# 1 0x93f6992e in _dispatch_hwconfig + 0x93DAC9A6 (libSystem.B.dylib + 0x0000092e)
# 2 0x00feff13 in _McpFInitNetworkPIDChecking + 0x000014DF (MicrosoftComponentPlugin + 0x00080f13)
# 3 0x91ccd7ae in __gTECMasterGlobals + 0x919A184A (CarbonCore + 0x000267ae)
# 4 0x93f96fbd in _dispatch_hwconfig + 0x93DDA035 (libSystem.B.dylib + 0x0002dfbd)
# 5 0x93f96e42 in _dispatch_hwconfig + 0x93DD9EBA (libSystem.B.dylib + 0x0002de42)
X86 Thread State:
eax: 0xffffffda ebx: 0x91cfff32 ecx: 0xb0395e6c edx:0x93f6992e
edi: 0xb0395f46 esi: 0x00000000 ebp: 0xb0395e98 esp:0xb0395e6c
ss: 0x00000023 eip: 0x93f6992e cs: 0x0000000b ds:0x00000023
es: 0x00000023 fs: 0x00000023 gs: 0x0000000f eflags:0x00000246
Loaded modules:
0: Microsoft Entourage (12.2.3.091001 Reg=en Loc=0x0409): /Applications/Microsoft Office 2008/Microsoft Entourage.app/Contents/MacOS/Microsoft Entourage
1: Netlib: /Applications/Microsoft Office 2008/Microsoft Entourage.app/Contents/MacOS/../Frameworks/Netlib.framework/Versions/12/Netlib
2: MicrosoftComponentPlugin: /Applications/Microsoft Office 2008/Microsoft Entourage.app/Contents/MacOS/../Frameworks/MicrosoftComponentPlugin.framework/V ersions/12/MicrosoftComponentPlugin
3: PowerPlant: /Applications/Microsoft Office 2008/Microsoft Entourage.app/Contents/MacOS/../Frameworks/PowerPlant.framework/Versions/12/Pow erPlant
4: EntourageCore: /Applications/Microsoft Office 2008/Microsoft Entourage.app/Contents/MacOS/../Frameworks/EntourageCore.framework/Versions/12/ EntourageCore
5: EntourageLegacy: /Applications/Microsoft Office 2008/Microsoft Entourage.app/Contents/MacOS/../Frameworks/EntourageLegacy.framework/Versions/1 2/EntourageLegacy
6: merp: /Applications/Microsoft Office 2008/Microsoft Entourage.app/Contents/MacOS/../Frameworks/merp.framework/Versions/12/merp
7: PowerPlantCore: /Applications/Microsoft Office 2008/Microsoft Entourage.app/Contents/MacOS/../Frameworks/PowerPlantCore.framework/Versions/12 /PowerPlantCore
8: OpenTransport: /System/Library/PrivateFrameworks/OpenTransport.framework/OpenTransport
9: Smart Crash Reports (1.5 Reg=English Loc=0x0000): /Library/InputManagers/Smart Crash Reports/Smart Crash Reports.bundle/Contents/MacOS/Smart Crash Reports
10: libTraditionalChineseConverter.dylib: /System/Library/CoreServices/Encodings/libTraditionalChineseConverter.dylib
11: libSimplifiedChineseConverter.dylib: /System/Library/CoreServices/Encodings/libSimplifiedChineseConverter.dylib
12: ATSHI.dylib: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/Resources/ATSHI.dylib
13: libFontRegistryUI.dylib: /System/Library/Frameworks/ApplicationServices.framework/Frameworks/ATS.framewo rk/Resources/libFontRegistryUI.dylib
14: vImage: /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vImage.fr amework/Versions/A/vImage
15: ImageCapture: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/ImageCapture. framework/Versions/A/ImageCapture
16: liblangid.dylib: /usr/lib/liblangid.dylib
17: DirectoryService: /System/Library/Frameworks/DirectoryService.framework/Versions/A/DirectoryServi ce
18: OpenCL: /System/Library/Frameworks/OpenCL.framework/Versions/A/OpenCL
19: CarbonSound: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CarbonSound.f ramework/Versions/A/CarbonSound
20: HIServices: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ HIServices.framework/Versions/A/HIServices
21: Accelerate: /System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate
22: HTMLRendering: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HTMLRendering .framework/Versions/A/HTMLRendering
23: CommonPanels: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CommonPanels. framework/Versions/A/CommonPanels
24: SpeechRecognition: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecogni tion.framework/Versions/A/SpeechRecognition
25: libobjc.A.dylib: /usr/lib/libobjc.A.dylib
26: SearchKit: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchK it.framework/Versions/A/SearchKit
27: CoreVideo: /System/Library/Frameworks/CoreVideo.framework/Versions/A/CoreVideo
28: libvDSP.dylib: /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvDSP.dylib
29: ColorSync: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ColorSync.framework/Versions/A/ColorSync
30: libGFXShared.dylib: /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGFXShared.d ylib
31: vecLib: /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/vecLib
32: libresolv.9.dylib: /usr/lib/libresolv.9.dylib
33: libGIF.dylib: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libGIF.dylib
34: CFNetwork: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwo rk.framework/Versions/A/CFNetwork
35: SpeechSynthesis: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ SpeechSynthesis.framework/Versions/A/SpeechSynthesis
36: CoreFoundation: /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
37: libPng.dylib: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libPng.dylib
38: DiskArbitration: /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
39: TrustEvaluationAgent: /System/Library/PrivateFrameworks/TrustEvaluationAgent.framework/Versions/A/Tru stEvaluationAgent
40: libGLU.dylib: /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLU.dylib
41: libcrypto.0.9.8.dylib: /usr/lib/libcrypto.0.9.8.dylib
42: PrintCore: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/PrintCore
43: FamilyControls: /System/Library/PrivateFrameworks/FamilyControls.framework/Versions/A/FamilyCon trols
44: AppKit: /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
45: CoreData: /System/Library/Frameworks/CoreData.framework/Versions/A/CoreData
46: LangAnalysis: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LangAnalysis.framework/Versions/A/LangAnalysis
47: CarbonCore: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore
48: libBLAS.dylib: /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libBLAS.dylib
49: ApplicationServices: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services
50: QuartzCore: /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore
51: libxml2.2.dylib: /usr/lib/libxml2.2.dylib
52: AGL: /System/Library/Frameworks/AGL.framework/Versions/A/AGL
53: OpenGL: /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
54: libcups.2.dylib: /usr/lib/libcups.2.dylib
55: libTIFF.dylib: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libTIFF.dylib
56: libJPEG.dylib: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libJPEG.dylib
57: WebCore: /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
58: Help: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Help.framewor k/Versions/A/Help
59: libGL.dylib: /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib
60: OSServices: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServi ces.framework/Versions/A/OSServices
61: Security: /System/Library/Frameworks/Security.framework/Versions/A/Security
62: IOKit: /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
63: libTrueTypeScaler.dylib: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/Resources/libTrueTypeScaler.dylib
64: libCGXType.A.dylib: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCGXType.A.dylib
65: SecurityInterface: /System/Library/Frameworks/SecurityInterface.framework/Versions/A/SecurityInter face
66: WebKit: /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit
67: ImageIO: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/ImageIO
68: NetFS: /System/Library/Frameworks/NetFS.framework/Versions/A/NetFS
69: DesktopServicesPriv: /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Desk topServicesPriv
70: libSystem.B.dylib: /usr/lib/libSystem.B.dylib
71: OpenScripting: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/OpenScripting .framework/Versions/A/OpenScripting
72: AudioToolbox: /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
73: Ink: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Ink.framework /Versions/A/Ink
74: Carbon: /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
75: RawCamera (505 Reg=English Loc=0x0000): /System/Library/CoreServices/RawCamera.bundle/Contents/MacOS/RawCamera
76: libFontRegistry.dylib: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/Resources/libFontRegistry.dylib
77: libRIP.A.dylib: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libRIP.A.dylib
78: JavaScriptCore: /System/Library/Frameworks/JavaScriptCore.framework/Versions/A/JavaScriptCore
79: libFontParser.dylib: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/Resources/libFontParser.dylib
80: libCoreVMClient.dylib: /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libCoreVMClien t.dylib
81: libauto.dylib: /usr/lib/libauto.dylib
82: DictionaryServices: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Diction aryServices.framework/Versions/A/DictionaryServices
83: libmathCommon.A.dylib: /usr/lib/system/libmathCommon.A.dylib
84: libbsm.0.dylib: /usr/lib/libbsm.0.dylib
85: HIToolbox: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox
86: CoreServices: /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
87: MultitouchSupport: /System/Library/PrivateFrameworks/MultitouchSupport.framework/Versions/A/Multit ouchSupport
88: libGLImage.dylib: /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLImage.dyl ib
89: libLAPACK.dylib: /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib
90: OpenDirectory: /System/Library/Frameworks/OpenDirectory.framework/Versions/A/OpenDirectory
91: SystemConfiguration: /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
92: ColorSyncDeprecated.dylib: /System/Library/Frameworks/ApplicationServices.framework/Frameworks/ColorSync.f ramework/Versions/A/Resources/ColorSyncDeprecated.dylib
93: Kerberos: /System/Library/Frameworks/Kerberos.framework/Versions/A/Kerberos
94: ATS: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/ATS
95: Metadata: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadat a.framework/Versions/A/Metadata
96: AudioUnit: /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
97: libicucore.A.dylib: /usr/lib/libicucore.A.dylib
98: libCSync.A.dylib: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCSync.A.dylib
99: LaunchServices: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchS ervices.framework/Versions/A/LaunchServices
100: libRadiance.dylib: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libRadiance.dylib
101: QD: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ QD.framework/Versions/A/QD
102: Foundation: /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
103: CFOpenDirectory: /System/Library/Frameworks/OpenDirectory.framework/Versions/A/Frameworks/CFOpen Directory.framework/Versions/A/CFOpenDirectory
104: libGLProgrammability.dylib: /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLProgramma bility.dylib
105: vecLib: /System/Library/Frameworks/vecLib.framework/Versions/A/vecLib
106: libkxld.dylib: /usr/lib/system/libkxld.dylib
107: SecurityHI: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SecurityHI.fr amework/Versions/A/SecurityHI
108: QuickTime: /System/Library/Frameworks/QuickTime.framework/Versions/A/QuickTime
109: CoreUI: /System/Library/PrivateFrameworks/CoreUI.framework/Versions/A/CoreUI
110: IOSurface: /System/Library/Frameworks/IOSurface.framework/Versions/A/IOSurface
111: libsasl2.2.dylib: /usr/lib/libsasl2.2.dylib
112: PasswordServer: /System/Library/PrivateFrameworks/PasswordServer.framework/Versions/A/PasswordS erver
113: CoreGraphics: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics
114: Print: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framewo rk/Versions/A/Print
115: libvMisc.dylib: /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvMisc.dylib
116: CoreText: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreText.framework/Versions/A/CoreText
117: CoreAudio: /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
118: libstdc++.6.dylib: /usr/lib/libstdc++.6.dylib
119: AE: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/AE.fram ework/Versions/A/AE
120: Cocoa: /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
121: libsqlite3.dylib: /usr/lib/libsqlite3.dylib
122: NavigationServices: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/NavigationSer vices.framework/Versions/A/NavigationServices
123: libz.1.dylib: /usr/lib/libz.1.dylib
124: libxslt.1.dylib: /usr/lib/libxslt.1.dylib
125: SecurityFoundation: /System/Library/Frameworks/SecurityFoundation.framework/Versions/A/SecurityFoun dation
126: libCyrillicConverter.dylib: /System/Library/CoreServices/Encodings/libCyrillicConverter.dylib
127: libGreekConverter.dylib: /System/Library/CoreServices/Encodings/libGreekConverter.dylib
128: libJapaneseConverter.dylib: /System/Library/CoreServices/Encodings/libJapaneseConverter.dylib
129: libKoreanConverter.dylib: /System/Library/CoreServices/Encodings/libKoreanConverter.dylib
130: libLatin2Converter.dylib: /System/Library/CoreServices/Encodings/libLatin2Converter.dylib
131: libLatin5Converter.dylib: /System/Library/CoreServices/Encodings/libLatin5Converter.dylib
132: libLatinSuppConverter.dylib: /System/Library/CoreServices/Encodings/libLatinSuppConverter.dylib
Operating System Information
Operating System: Mac OS X 10.6.2 (Build 10C540)
CPU: Intel Core Duo, Number: 2, Speed: 2147 MHz
gestaltPhysicalRAMSize err = 0, result = 2047 MB
gestaltSystemVersion err = 0, result = 0x1062
Screen: 1920 x 1200, depth = 32, ltbr = 0, 0, 1200, 1920
Microsoft Application Information:
Error Reporting UUID: A50CE3D6-2E3B-41D7-8BDF-E28D8D6AED8D
Time from launch: 0 hours, 0 minutes, 10 seconds
Total errors on this client: 3
There's no crash log for GE; it just sits on the dock. The only option is a Force Quit.
Any other suggestions? -
License upgradation problem from windows server 2008 r2 STD to ENT edition
Hello All,
facing problem to upgrade License windows server 2008 r2 STD to ENT edition.
Change the key also but not work. please suggest
Error :
C:\Users\administrator.rr>Dism /online /Set-Edition:ServerEnterprise /ProductKey:hfget-43erf-ed432-tfed4-de321
Deployment Image Servicing and Management tool
Version: 6.1.7600.16385
Image Version: 6.1.7601.18489
Error: 1605
The specified product key is not valid for the target edition.
Run this command again with a product key specific to the target edition.
The DISM log file can be found at C:\Windows\Logs\DISM\dism.log
015-02-15 19:36:46, Info DISM PID=2464 Scratch directory set to 'C:\Users\ADMINI~1\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2015-02-15 19:36:46, Info DISM PID=2464 Successfully loaded the ImageSession at "C:\Windows\System32\Dism" - CDISMManager::LoadImageSession
2015-02-15 19:36:46, Info DISM DISM Provider Store: PID=2464 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
2015-02-15 19:36:46, Info DISM DISM Provider Store: PID=2464 Failed to get and initialize the PE Provider. Continuing by assuming that it
is not a WinPE image. - CDISMProviderStore::Final_OnConnect
2015-02-15 19:36:46, Info DISM DISM Provider Store: PID=2464 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
2015-02-15 19:36:46, Info DISM DISM Provider Store: PID=2464 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2015-02-15 19:36:46, Info DISM DISM Provider Store: PID=2464 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2015-02-15 19:36:46, Info DISM DISM Provider Store: PID=2464 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2015-02-15 19:36:46, Info DISM DISM Provider Store: PID=2464 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2015-02-15 19:36:46, Info DISM DISM Manager: PID=2464 Successfully created the local image session and provider store. - CDISMManager::CreateLocalImageSession
2015-02-15 19:36:46, Info DISM DISM Provider Store: PID=2464 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2015-02-15 19:36:46, Info DISM DISM Provider Store: PID=2464 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2015-02-15 19:36:46, Info DISM DISM.EXE:Hi Parvez Islam,
The active issue we can call the telephone to active center, they will give the detail and official support answer, you can get communication way from following web site:
Existing Customers
Product Activation and Key Information
http://www.microsoft.com/licensing/activation/existing-customers/product-activation.aspx
Base on my experience your issue most time occur when you have the following known issue environment, please refer the following KB to fix it.
Features missing or incorrect memory reported after using dism /set-edition to upgrade computer
http://support.microsoft.com/kb/2652825
More information:
How to upgrade Windows Server 2008 R2 Standard to Enterprise
http://blogs.technet.com/b/austria/archive/2011/04/12/how-to-upgrade-windows-server-2008-r2-standard-to-enterprise.aspx
I’m glad to be of help to you! -
Two previous questions may not have been as clear as I would have liked. I recently upgraded my MacBook 2008 (10.5.8) to Snow Leopard (10.6.8). With the updates came iTunes 11.1.1 and Quicktime 7.6.6. I am still using Garageband 2008 and iPhoto 2008. When I create music in Garageband I usually adjust the volume and save it. Even now when I share the Garageband created files with iTunes 11.1.1, the volime I previously set in Garageband is retained. However, when I use the music to create a slide show in iPhoto 2008 and export to Quicktime 7.6.6, the volume level I previously set is lost and seems to default to a low level. The problem seems to be either in the slide show export from iPhoto 2008 to Quicktime 7.6.6 or in Quicktime itself. Is there a work around, so that I can retain the volume level I had previously set in Garageband, a volume level that seems to transfer without problem to the new iTunes. But then iPhoto 2008 (slide show) possibly or Quicktime 7.6.6 do not cooperate. Before I did the upgrade to Snow Leopard, the new iTunes and Quicktime I had no problems with the set volume being retained in the old Quicktime. The reason I need control over the volume is that all these music files are uploaded to YouTube.
Two previous questions may not have been as clear as I would have liked. I recently upgraded my MacBook 2008 (10.5.8) to Snow Leopard (10.6.8). With the updates came iTunes 11.1.1 and Quicktime 7.6.6. I am still using Garageband 2008 and iPhoto 2008. When I create music in Garageband I usually adjust the volume and save it. Even now when I share the Garageband created files with iTunes 11.1.1, the volime I previously set in Garageband is retained. However, when I use the music to create a slide show in iPhoto 2008 and export to Quicktime 7.6.6, the volume level I previously set is lost and seems to default to a low level. The problem seems to be either in the slide show export from iPhoto 2008 to Quicktime 7.6.6 or in Quicktime itself. Is there a work around, so that I can retain the volume level I had previously set in Garageband, a volume level that seems to transfer without problem to the new iTunes. But then iPhoto 2008 (slide show) possibly or Quicktime 7.6.6 do not cooperate. Before I did the upgrade to Snow Leopard, the new iTunes and Quicktime I had no problems with the set volume being retained in the old Quicktime. The reason I need control over the volume is that all these music files are uploaded to YouTube.
-
Problem upgrading [SOLVED]
I-ve a problem upgrading with my Arch 64. I've the next problem while upgrading...
4:01# pacman -Syu /home/koven
:: Synchronising package databases...
core is up to date
extra is up to date
community is up to date
:: Starting full system upgrade...
warning: ruby: forcing upgrade to version 1.8.7_p72-1
resolving dependencies...
looking for inter-conflicts...
error: failed to prepare transaction (could not satisfy dependencies)
:: linux-uvc-svn: requires kernel26<2.6.26
If you've any idea about this issue please let me know.
Regards
Last edited by Koven (2008-08-17 22:17:50)Ok. Thanks for your help, but removing that package was not the solution because I hadn't installed it. The only reference I had about that package was
5:13# locate linux-uvc-svn ~koven
/var/lib/pacman/local/linux-uvc-svn-238-1
/var/lib/pacman/local/linux-uvc-svn-238-1/depends
/var/lib/pacman/local/linux-uvc-svn-238-1/desc
/var/lib/pacman/local/linux-uvc-svn-238-1/files
/var/lib/pacman/local/linux-uvc-svn-238-1/install
So I decided to remove this folder and my problem was solved. Anyway I did some searches and nothing was found.
Regards -
WSUS hinders OS upgradation from win 2008 R2 Sp1 to Win 2012 STD
Hi Experts,
i have a server with WSUS role on win 2008 R2 Sp. While upgrating its OS to Win 2012 STD, it undergoes in complatibity check and displays to uninstall WSUS before proceding. Is it necesaaring to remove the role and continue the installation
? Is there any other way to over come this problem , other that removing the role and re-assigning after OS upgradation ?
ThansksHi,
As far as I know, Windows Server Update Services 3.0 SP2 cannot be installed on Windows 2012, so I suggest you uninstall it, and then migrate WSUS to V6, please also go through the below threads for more helpful information:
IN-place upgrade of WSUS v3 to WSUS v6
http://social.technet.microsoft.com/Forums/en-US/e26a7541-def0-4144-826d-64d54315658e/in-place-upgrade-wsus-windows-2008-r2-into-windows-server-2012?forum=winserverwsus
update server 2012 from wsus server 2008 r2 error 800b0001
http://social.technet.microsoft.com/Forums/windowsserver/en-US/fc824e74-5007-42f8-9a5e-f61a55956a45/update-server-2012-from-wsus-server-2008-r2-error-800b0001?forum=winserverwsus
Regards,
Yan Li
Regards, Yan Li -
How to upgrade Domain Controller 2008 to 2012 on New Server
Hi All,
We are planning to upgrade our domain controller and exchange server 2008 to 2012 R2, so can anyone please suggest what step should be taken first. we have new server machine we are planning to install Windows 2012 R2 and create a additional domain controller
of our existing domain 2008 then transfer the FSMO roles to this server to act as a primary. after successful migration we will upgrade our exchange 2008 to 2012. please advice is there any problem to do this way.
Thanks
AghaI was just curious about the same thing. However, I am running 32bit version of server 2008 and want to move the server 2012 r2. This will be on a machine with new hardware and all. Am just curious though if it is possible to migrate some of the
domain as to not to have to replicate everything?
Directory Services doesn't really care what version of the OS you are using. You cannot do an in-place upgrade from a 32bit box to a 64bit box.
You'll need to make your new R2 server, install AD, move the FSMOs, and demote your 2008 32bit box.
What WOULDN'T you want to replicate? That's not how AD works. It's a multimaster enviroment where ALL DCs have the same information. You can't choose which objects replicate. To do that, you'll need to clean up your AD.
Good luck.
- Chris Ream -
**Remember, if you find a post that is helpful, or is the answer, please mark it appropriately.** -
Upgrading domain from 2008 R2 to 2012 R2
I am looking to upgrade my domain from server 2008 R2 to 2012 R2. We have 10 remote sites, each with a single physical ESXi host hosting 2 vms, 1 2008 R2 vm with the ADDS/DHCP/DNS/File Services (user home drives) roles and the second 2008 R2 vm
runs WDS/MDT and a couple applications. At our main site we have a physical 2008 R2 DC which holds all the FSMO roles, a vm with the ADDS/DHCP/DNS/File Services roles, and another vm running WDS/MDT.
I've gathered from my research that Microsoft recommends clean installs when upgrading DCs but since our DCs are also file servers that's not an ideal course of action for us, it'd be a lot of additional steps. My plan at this point
is to bring up a new physical 2012 R2 server, make it a DC, transfer the FSMO roles to it, then demote and retire the current physical 2008 R2 server. For the virtual DCs, since they are also file servers, I'm leaning towards in-place upgrades
on them, unless anyone would advise against.
The other thing I'm considering is creating a 2012 R2 DC at each remote site, then demoting the current 2008 R2 DC, leaving some combination of DHCP/File Services on it, then run an in-place on it to 2012 R2. This would requre another Windows license
though since our physical hosts are not on Hyper-v.
For the virtual servers running WDS/MDT, I personally prefer an in-place so I don't have to move the MDT deployment share, but I'm open to suggestions.
What are your recommendations? Which server should I upgrade first? How much time should I allow between each DC upgrade? I appreciate the help.As per recommendations, A DC should be solely utilized for AD/DNS/GC & if environment is small for DHCP. The problem in using DC for other purpose arise during upgrade scenario, when you have to demote the DC or performance. Demoting the DC is very simple,
but if its running with additional role, it becomes challenging, if demotion has to be performed forcefully.
Secondly, from the security point, its not a great idea to run DC with other roles esp file servers, if there is any infected file then the whole domain can be compromised or infected.
What is more relevant in upgrade is testing the applications before you perform or upgrade the schema. If there is no issues then you can perform the upgrade based on your convenience. But necessary documentation & testing prior & post has to be
followed.
My personal recommendation would be upgrade the schema(surely test the schema upgrade in lab before you do in production), create a new server either VM or physical, configure it as an DC & transfer all FSMO role & slowly try to segregation between
DC & non DC servers.
Yes, i know it will cost additional licensing burden, but from the environment point of view it will provide you an ease of administration & troubleshooting.
http://blogs.technet.com/b/chrisavis/archive/2013/10/01/performing-an-in-place-upgrade-of-server-2008-r2-to-server-2012-r2.aspx
http://blogs.technet.com/b/canitpro/archive/2013/06/18/step-by-step-active-directory-migration-from-windows-server-2008-r2-to-windows-server-2012.aspx
Awinish Vishwakarma - MVP
My Blog: awinish.wordpress.com
Disclaimer This posting is provided AS-IS with no warranties/guarantees and confers no rights. -
Mountain Lion OS upgrade on MBP 2008?
Would you suggest upgrading a MBP 2008 with the Mountain Lion OS? My computer runs like the day I bought it but im concerned with all the chit chat about compatibility that I may get myslf into trouble here.... I do have Lion on it currently and have no issues......
Before upgrading consider:
Don't upgrade if you are in the midst of important work. Wait until you have finished.
If you are having problems with your computer get them sorted out before you upgrade.
Verify that any mission critical software will be compatible with the upgrade.
Do you need the upgrade?
Make a bootable backup of your current system before upgrading. This will make returning to your previous system easier should you decide to do so. -
Installation problem on windows server 2008 r2 datacenter edition 64bit
hi
today, i tried to install the current maxdb 7.8 release on my virtual server with a windows server 2008 r2 datacenter 64bit edition os. at the first installation, i got an error message something with "rte runtime error". at this point, the installation stopped.
because of this error, i tried to uninstall the failed installation. this was not possible, in the uninstaller, i didn't see any components, so i can't uninstall.
so i tried to delete the files manually: the entries in the start menu, and the application's path under "program files"... first, i need to kill a process named "serv.exe", that creates a tcp daemon under port 7200... after killing it, the deletion of the dir in program files was successful.
this is very very weird, now my server is "contaminated" with an uncomplete uninstallation of maxdb...
why maxdb 7.8 has problems on windows server 2008 r2 datacenter 64bit edition???
thanks for feedbacks!
regards, jan> no, because i canceled this virtual server - another method to solve this problem. (i have really no time for things like that..!)
If you take the time to give exact error messages then someone will be certainly able to help
> on windows server 2003, there are NO problems.
Windows 2003 != Windows 2008 - they use a different kernel, a different security system (UAC) and other features that may prevent a succesfull installation in the first place.
I installed a MaxDB 7.8 just today on Windows 2008 R2 and it worked fine.
Markus -
Problem in Crystal Report 2008 selectionFormula
Post Author: saro_j
CA Forum: Crystal Reports
Hi,
I am having a strange problem in Crystal report 2008. Earlier I was using VS 2005 Crystal report. Then we purchased Crystal report 2008.
When I open the VS 2005 projects it asks the reports to convert into Crystal report 2008. I did that.
Earlier I was using the following syntax for passing the date as selectionFormula
Dim selectionFormula As String = "{tblClient.Name} = '" & ddlClient.SelectedItem.Text & "' and {TBILL_File_Format.Week Ending Date} = #" _& Convert.ToDateTime(DtCtrlProDateFrom.DateTimeValue) & "#u201D WeeklyReportByClientNameReport.DataDefinition.RecordSelectionFormula = selectionFormula
But now when I run this same it says
This field name is not known. Details: errorkind Error in the file rptWeeklyReport.rpt: Error in formula Record_selection:
u2018{tblClient.Name} = 'ABC10' and "{TBILL_File_Format.Week Ending Date} = #04/20/2008#u2019 This field name is not known. Details: errorkind
I have no idea about this
Even If I tried to pass as follows
selectionFormula = "{TBILL_File_Format.Week Ending Date} = DateTime (2008, 04, 25, 00, 00, 00) and {TBILL_File_Format.Client Code} = 'ABC10' "
I couldnu2019t see any record on the report except Grouptree of the report. If I export the report it has all the data as I expected.
Please help me out on this regards.
Thanks in advance
SaravananPost Author: jehanzeb
CA Forum: Crystal Reports
Hello,
I use CR2008 and VS2005, it never asked me to convert the file into VS2005. What do you mean by VS 2005 asked you to convert the file? Did you make the file in CR2008 and then imported it into VS2005 as a Report Document?
I usually create a report on CR2008 and then move that report (copy) to the same folder as VS project folder, then from there I create a new Report Doc in VS and open the file.
As you mentioned when you export the report it works fine but when you run it it gives errors. I think it is because of the import of the report. Look at the error message as it says the field name is not known, I suspect it is not connected/imported properly.
"This field name is not known. Details: errorkind Error in the file rptWeeklyReport.rpt: Error in formula Record_selection:
u2018{tblClient.Name} = 'ABC10' and "{TBILL_File_Format.Week Ending Date} = #04/20/2008#u2019 This field name is not known. Details: errorkind"
I think it is becasue of the import of the report or could be becasue you didnt save the report with an option of "save report data". Check your report and reimport it. might fix the problem:D -
Problem Upgrading to Apex 3.1 on XE
I am running into a problem upgrading Apex to 3.1 on Oracle XE.
Hardware and Software:
Database: Oracle Database 10g Express Edition Release 10.2.0.1.0
PL/SQL Web Toolkit Version: 10.1.2.0.4
Host O/S: MS Windows XP Professional Version 2002 SP2
Host Hardware: AMD Athlon 64 Processor, 2.2 GHz, 1.87 GB RAM
Background:
This is a lab host. I am working through the full installation process so that I can set up XE and Apex on development and production hosts, the end in mind being to develop a simple application using XE/Apex instead of Access 2003, which is used heavily in this shop.
It seems to me that upgrading to Apex 3.1 would be a good thing to do up front instead of developing in the version which ships with XE (2.1, I believe) and performing the upgrade later.
I installed XE going with full defaults. Nothing at all tricky. I was able to connect to http://localhost:8080/apex without any trouble and log in as system.
I then followed these Apex upgrade instructions, very carefully:
http://www.oracle.com/technology/products/database/application_express/html/3.1_and_xe.html
After I ran into trouble (see below), I reviewed this post and used it to double-check my work:
How to upgrade to Apex 3.1
I have worked through this a number of times, each time ending up with the same error.
The Problem...
After the upgrade, when I navigate to http://localhost:8080/apex, I receive the following error:
wwv_flow.app_not_found_footer_err
wwv_flow.err wwv_flow.app_not_found_err
OK
I reviewed this posting, which suggests that I upgrade my PL/SQL Web Toolkit:
apex 3.0 error wwv_flow.app_not_found_footer_err after new installation
I am perfectly willing to try this, but I am not sure how to obtain the latest correct version of the web toolkit for this particular version of the database. Any tips on where I might find this?
I also note that the posting says there should be 10 SQL files in the apex/builder directory. I only have 5, but I just downloaded this zip file a few days ago and assume this is the correct number of files. If it isn't, where could I find the correct zip?
Any other suggestions about the root cause of this issue would be appreciated.
Thanks!Well, like Sherlock Holmes said, "when you have elminated the impossible, whatever remains, no matter how improbable, must be the truth." Or, something like that.
Thanks Joel, it was the files. I examined the zip file I originally downloaded and, sure enough, there were 10 files. I extracted it again and, for some reason, this time it only pulled one of the SQL files out, not even five as it did the first time. In addition, it also skipped about half the language folders.
To get it work, I used the windows built-in zip to open the file, navigated to the apex/builder folder, selected all of the SQL files and language folders, then copied and pasted them into c:\apex\builder.
I then restored the database, ran the install again, and everything worked just fine: I can access http://localhost:8080/apex/apex_admin and log in.
I'm not sure what the issue is, a problem with the zip file or (ok, more likely) a problem with the built-in windows zip tool. I used 7-zip (www.7-zip.org) to extract the file on my workstation and all 10 files and 9 language folders came out just fine.
The bottom line is, it works now, thanks again for the help.
-Tom
PS - I did not install the web toolkit upgrade. -
Why are there so many problems with the early 2008 Mac Pro ???
Hi everybody out there using Mac Pro's early 2008,
I found out there is a lot of problems with the early 2008 Mac Pro.
My early 2008 Mac Pro has been repaired ones under warranty and now it stopped working again ! Also see under: Mac Pro early 2008 no chime and does not start up. Why is this ????
It worked well for about 2 years and then it just fails and i had this failing issue twice already !!! Is this just a BAD Apple product or how do you think I need to approach this. Let’s face it, these machine don’t come cheap and you at least expect them to work without problems for 4-5 years. What is happening here ???
Cheers, Kavangogo to a black screen after 15 minutes or a couple hours
That is probably an indication that you need to find a new graphics card.
RE: Mac Pro Replacement Graphics cards
1) Apple brand cards,
2) "sold in the Apple store" cards, and
3) "Mac Edition" cards ...
... show all the screens, including Boot up screens, Safe Mode, Installer, Recovery, debug screens, and Alt/Option boot screens. At this writing, these choices include:
1) Apple brand cards:
• Apple-firmware 5770, about US$250** works near full speed in every model Mac Pro, Drivers in 10.6.5
• Apple-firmware 5870, about US$450
2) "sold in the Apple store" cards
• NVIDIA Quadro 4000, about US$1200
• NVIDIA Quadro 5000, about US$2500
3) "Mac Edition" cards -- REQUIRE 10.8.3 or later:
• SAPPHIRE HD 7950 3GB GDDR5 MAC Edition, about US$480** Vendor recommends Mac Pro 4,1
• EVGA GTX 680 Mac Edition, about US$600
The cards above require no more than the provided two 6-pin aux power connectors provided in the Mac Pro through 2012 model. Aux cables may not be provided for third-party cards, but are readily available.
If you are Meet ALL of these:
• running 10.8.3 or later AND
• don't care about "no boot screens" etc AND
• can re-wire or otherwise "work out" the power cabling, THEN:
You can use many more cards, even most "PC-only cards" -
Problems upgrading from OS 8.1 to OS 9.2.2
Thank you for any help you can give me.
I have some additional problems upgrading from OS 8.1 to OS 9.2.2.
1. The keyboard is typing symbols, not normal letters. When I go to Key Caps it shows symbols and not normal letters. When I was running OS 8.1 the keyboard typed fine.
2. I also am have trouble with windows closing as I open new windows. Everytime I click to open a new folder the old folder closes.
3. Copying files. When I drag a file it makes a new copy on the desktop.
How did I goof up going from OS 8.1 directly to OS 9.2.2?
All these problems were fine while running under OS 8.1.
I believe this computer came with OS.8.6 installed on it but I got it with OS 8.1.
Any help you can pass on to me would be greatly appreciated.
I am typing this on my Dell PC.
Thanks a million,
Jim
iMac G3 333 Mac OS 9.2.xEasy, I just insert my OS 8.1 System Software into the tray loading CD and choose it as the start up disk in the control panel. I restart the computer and it is running off of OS 8.1 instead on OS 9.2.2. I looked for another keyboard today at a used computer store but they didn't have one for the iMac. I need to find one as all my research indicates that it is somehow connected to the option key. But then again everything works fine under OS 8.1. Quite a puzzle to me. Again thanks for the page tip on Firmware. Jim - PS, I did pick up a zip drive that connects to USB ports.
iMac G3 333 Mac OS 9.2.x -
I just upgraded from my 2008 MacBook to a new Macbook Pro. How do I get my time capsule to work on my new MacBook? I did data migration, but the time capsule did not pick it up. Any ideas?
If you migrated all the info from time machine to your new MBP. The TM will usually ask to connect to the old backups.. sorry I am not sure is this what you want to do.. Personally I think you start a fresh backup.
BTW Time Capsule does not do anything.. it is a dumb hard disk in a box.. it is TM that does everything.
Look at B5 and B6 here about connecting to your backup.
http://pondini.org/TM/Troubleshooting.html
Maybe you are looking for
-
Problem with USB port in HP 15-G009AX
I have a HP 15-G009AX notebook with windows 8.1 (64 bit). Previously all USB ports were working fine when I had the 32 bit version of windows 8.1. After installing the 64 bit version, one of the USB 2.0 ports on the right hand side is not working pro
-
Adapter specific attributes - SOAP Adapter
Hi, I am trying to use the adapter specific attributes of the receiver SOAP adapter. But I am not able to view the Dynamic configurations in sxi_monitor corresponding to this message. Any clue why!? I read through the SOAP adapter help on help.sap.co
-
Excel web access: Parameters in external data sources not supported???
I have a SharePoint 2013 site with Excel services. The site itself has a Current User Filter Web Part which gives filter value [userID] to a Excel web access -web part. In the Excel itself I have a named area(UserIDfromSharePoint) defined as a parame
-
Dimensions of the screen changes burning in idvd
I am having a problem burning Quicktime files from fcp5 on idvd. the quicktime files play fine, but once they are in idvd, they "shrink" vertically at a random point in the movie. (it looks kind of like widescreen tv.) Happens with everything I do no
-
Does Apple TV actually shut off when you switch back to regular TV? Or do you have to sign out? How do you sign out? Or is there another way to shut it off? Thanks!