Problems using FPT-AG02G 3D Glasses with a 40TL968B TV and BDX4350 Blu ray
Hi,
I've just set up a new 40TL968B Tv and BDX4350 player.
I decided to invest in a couple of pairs of the FPT-AG02G glasses.
When trying to view a 3D disk I am having an issue where the shutter affect on the glasses keeps on cutting out.
This is happening on both pairs of the glasses and they have both had a full charge using the USB cable supplied.
When I switch them on the light flashes every few seconds and if I go up close to the TV the 3D effect begins on the glasses. This will then continue for maybe 5 to 10 seconds, where the shutters function and the picture appears is in 3D, before stopping and I am left looking at the blurred image from the TV again.
If I then move so the glasses are very close to the IR output from the TV then the shutter affect might begin but stop after period again.
The IR transmitter from the TV is not blocked by anything and niether is the reciever on the glasses.
Has anyone experienced this before or have any ideas how to overcome the problem?
Many thanks, Ian.
> When I switch them on the light flashes every few seconds and if I go up close to the TV the 3D effect begins on the glasses. This will then continue for maybe 5 to 10 seconds, where the shutters function and the picture appears is in 3D, before stopping and I am left looking at the blurred image from the TV again.
I think you should check if the 3D glasses battery power is OK.
I found an nice Toshiba FAQ page which may be helpful in the future.:
https://ask.toshiba.co.uk/help/en-uk/3d-tv/?page=1
Similar Messages
-
Problems using Acrobat Pro to scan with 10.5.2 and HP7280
Hello,
I'm hoping someone can help me. I'm trying to use Acrobat Pro to create PDF via scan. The scanner I have is an HP Photosmart C7280 all in one. When I try to use it, it starts up HP Scan Pro and gives option is scan to Acrobat. Unfortunately, when I ask it to do so, it crashes Acrobat.
Any ideas on what to do to make this work?
ThanksBTW: whats with this Îικε stuff.
As for Adobe/HP.
They have had a long running feud of Sorts for years running.
there was a very long period that spanned several versions of Acrobat, and HP Print Driver Updates. where every time adobe issued an update for Acrobat. Hp had to turn around and issue an update to their print Drivers.
The controversy swilled around If a Pdf was printed through acrobat or Reader to an Hp Printer all you would se was a series of very fine line screwed sideways much like looking at a TV screen the Horizontal hold adjustment was out of whack.
I'm sure Aandi , and Mike as well as myself posting thousands of times over the years to use the work around of going to print menu advanced and choosing print as image. And if it cleared the problem, to get on the horn with HP and let them know their driver was broken.
HP would fix it it work for a month and Adobe would do another update, and the same thing would happen.
It would be like the joke about Peat and repeat sat on a fence. If Peat fell off who's left? Pete. Then you would say repeat. And the person telling everything would repeat until you caught on.
You would think that a Software That depending highly on how printers would print would actually have sample of printers from the printer vendors to test on.
I also find it strange you never hear of any other printers having as much problems with adobe products. -
Problems using 1080/50p video files in Premiere CS5 to Encore onto Blu-ray
Firstly apologies if this has been covered, I've searched various forums but not found anything on 1080/50p.
I have a Panasonic HDC-TM700 video camera which I only had for a week or so before I went on a weeks holiday in Egypt, so I thought I'd record my memories in the superb 1080/50p mode.
Upon returning I am now editing my work in Premiere CS5, the resulting video is very jerky (it plays back OK on the camera), rendering a sample in Encore I discover Blu-ray doesn't support 1080/50p so I tried the HDTV 1080i 25 setting, on the resulting Blu-ray the panning scenes are not smooth viewing and the video is still rather jerky.
Should I have recorded the footage in 1080 interlaced instead?
Does anybody know if I can salvage my memories?
Hoping you can help
Regards
KevinI have the same camera, only it's NTSC so 1080p60. What I do for now, until there is wider acceptance for this format, is that I export to 720p60. I know I may sound like a party pooper but I prefer progressive before interlaced... I am sure there will be support for 1080p50 or 1080p60 in the near future, so your memories will not be lost!
Some Bluray players do support 1080p60/50, but not from a disc but an SD card instead. If that's an option for you, go with that!
Here's the player I use which plays back 1080p60 beautifully from SD, I'm sure there is an equivalent player for PAL:
https://panasonic.ca/english/audiovideo/bluray/players/DMPBDT100.asp -
Problem using webservice method consumer proxy with rawdata from abap
Hello Gurus,
I am struggling with an error using a proxy consumer service from ABAP. The proxy was generated using the WSDL from the web service provider. For a specific method we need to send a rawstring as seen bellow:
The file to be sent on this call is a ZIP file XAdES-BES signed and on BASE64. I’ve implemented the proper code to get the original file from local PC, and convert it to BASE64 before moving the content to the webservice structure and call the service proxy. At SOAMANAGER I also configured the webservice and the proper port with the WSDL:
The communication is working properly but my problem is with the binary content. When calling the webservice the response is that the structure of the file is wrong. I found it very strange since I used a tiny SOAPUI project with the same WSDL and it worked with no problem.
After debugging I could see that the content moved to the rawdata string before calling the proxy does not match the content that I can see from the call payload on web services util (srt_util)!
So the sample code for my method:
* get the file from the specified folder
call function 'GUI_UPLOAD'
exporting
filename = ld_zipfilename
filetype = 'BIN'
importing
filelength = zip_size
tables
data_tab = t_zip_data[]
exceptions
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
others = 17.
* convert to string
clear buffer_zip.
call function 'SCMS_BINARY_TO_STRING'
exporting
input_length = zip_size
importing
text_buffer = buffer_string
tables
binary_tab = t_zip_data[]
exceptions
failed = 1
others = 2.
* encode base 64
perform encode_base64 using buffer_string
buffer_zip.
form encode_base64 using in_string type string
out_string type xstring.
data: l_sbuff type string.
* convert the file to BASE64
call method cl_http_utility=>encode_base64
exporting
unencoded = in_string
receiving
encoded = l_sbuff.
call function 'SCMS_STRING_TO_XSTRING'
exporting
text = l_sbuff
importing
buffer = out_string
exceptions
failed = 1
others = 2.
endform. "encode_base64
calling the webservice:
l_input-xxxx-dokument = buffer_zip.
try.
call method l_proxy_test->webservice
exporting
input = l_input
importing
output = l_output.
catch cx_ai_soap_fault into lr_exc_soap_fault.
endtry.
From my understanding rawstring should be the same as ABAP xstring. If I debug the program and check the content of the l_input-dokument before calling the proxy I get binary content: “Izw/eG1sIHZlcnNpb249IjEuMCIgZW5jb2Rpbmc9InV0Zi04Ij8…” that is in fact correct
If I check the payload after call I can see that the binary content sent on the XML is not the same, in fact it is totally different: ”SXp3L2VHMXNJSFpsY25OcGIyNDlJakV1TUNJZ1pXNWpiMlJw…” !!
I’ve tried a lot of different conversions, changed configuration on the communication, port, etc and nothing seems to work. I really can’t figure out why the binary content on the call is not the same as I move to the webservice structure.
If I use the project from SOAP UI and send the proper binary content, that is “Izw/eG1sIHZlcnNpb249IjEuMCIgZW5jb2Rpbmc9InV0Zi04Ij8…” it works perfectly and the response is successfully.
Anyone has a clue what could be causing this?
Appreciate any kind of input.
Regards,
João Silva Pinto.Anyone? Any clue would be appreciated.
-
Problems using Sony ECM DS70P Microphone with Vado HD 3rd gen
Problems using Sony ECM DS70P Microphone with Vado HD 3rd genXHello.
I have just purchased a Vado HD 3rd gen & was looking forward to using my Sony ECM DS70p Microphone,but after a couple of tests, the recording is extremely low & barley laudable.
The Microphone works fine on My Kodak Zi8.
Is there an internal setting I have to adjust, or is there a fault with the Vado
The Sony ECM DS70pMicrophone can be clearly seen in use here on a official Creative video.
http://www.youtube.com/watchv=oixLDAmc5qw
If anybody can offer some help or advice please, I would be very grateful.
Does anyone have a suggestion for a low profile stereo mic, to use with the Vado 3rd Gen
Thank you.
Thank you.This is happening to me too, I don't know if this is an Adobe Flash Player 11.5's bug or it's just my computer. All my browsers, chrome, IE9, Fox, doesn't even load anime videos. I tried reinstalling 11.5 many times, it have no effect but I use IE9 64-bit to run the videos that couldn't run. I waited 25 min for a JW player to load an episode of anime and I'm sick of it.
-
Apple_ID_card_declined_for_this_country
How can you expect the customer to have a LOCAL/COUNTRY Based Credit Card every where we go???
Last week I was on holiday in HK,
and
from my Hotel I was able to use m VN Credit Card with my Apple ID and purchase online!
Why THIS WEEK, can't I use my HSBC Platinum Credit Card from Vietnam,
for my Singapore Apple ID account ,
while working here in Vietnam???Unfortunately, this is a problem that is driven by the DRM Dictatorship. Despite the proliferation of mobile devices and the fact that there are many of us who do a lot of international travel, content providers don't want you to have access to their products outside of your homeland. The Balkanized mentality of the DRM Dictatorship is way out of touch with the modern world.
At least Apple, to its credit, allows you to use your accounts outside of your homeland as long as you have the proper credentials for them. Most other services use the more Draconian geolocation filtering which does require you to be physically present in your homeland. For the most part, you are not allowed to leave home if you want access to your favorite entertainment! -
My gen 3 iPod Touch seems to have duplicated all my music since updating to IOS 5 so that it now only holds half as much. What can I do about it? I'm using the same iTunes library with OS 10.6 and all software up to date.
Is the camera damaged? Could be a hardware problem.
Try:
Close the Camera app in the multitasking bar, then try again.
Restart/Reset/Restore your iPod. In that order. -
Hello, I would like to know if I can use the same nike Ipod sensor with two different ipods. I want to use the same sensor sometims with an Ipod touch and sometimes with an Ipod Nano, I want my trainings with both Ipods to be registered to the same account. I want them to be registered to only one account, not as it had been used by two different people.
Of course. You should use the same AppleID on all your devices. Why would you create a new one?
Matt -
Hi,
Can we assign 2 IPs for a SCCM 2012 primary site server and use 1 Ip for communicating with its 2 DPs and 2nd one for communicating with its upper hierarchy CAS . ?
Scenario: We are building 1 SCCM 2012 primary site and 2 DPs in one domain . In future this will attach to a CAS server which is in different domain. Can we assign 2 IPs in Primary site server , one IP will use to communicate with its 2 DPs and second
IP for communicating with the CAS server which is in a different domain.?
Details:
1)Server : Windows 2012 R2 Std , VM environment .2) SCCM : SCCM 2012 R2 .3)SQL: SQL 2012 Std
Thanks
Rajesh VasudevanFirst, it's not possible. You cannot attach a primary site to an existing CAS.
Primary sites in 2012 are *not* the same as primary sites in 2007 and a CAS is 2012 is completely different from a central primary site in 2007.
CASes cannot manage clients. Also, primary sites are *not* used for delegation in 2012. As Torsten points out, multiple primary sites are used for scale-out (in terms of client count) only. Placing primary sites for different organizational units provides
no functional differences but does add complexity, latency, and additional failure points.
Thus, as the others have pointed out, your premise for doing this is completely incorrect. What are your actual business goals?
As for the IP Addressing, that depends upon your networking infrastructure. There is no way to configure ConfigMgr to use different interfaces for different types of traffic. You could potentially manipulate the routing tables in Windows but that's asking
for trouble IMO.
Jason | http://blog.configmgrftw.com | @jasonsandys -
Nvidia 295.40 Problems Using XBMC Assaultcube or anything with(SOLVED)
The title pretty much sums it up , Ever since I updated to 295.40 . The previous driver 295.33 was working fine . Problems Using XBMC , Wine , Assaultcube or anything with uses Open GL . The two machines that are affected have the same hardware ( Nvidia 6200 pci) . Let me know if any of you are having similar issues . I will continue to work on this for a couple of hours . Thanks .
Last edited by sliposk (2012-05-03 18:47:26)Tried upgrading the nvidia package after upgrading linux to 3.3.2 but with no success, it still freezes…
Gusar wrote:As I wrote in the other thread, the main point of 295.40 is to fix security vulnerabilities. So if you want to use older versions, at least patch them: http://www.nvnews.net/vbulletin/showthread.php?t=178006
Tried to patch 295.33, successfully (making a 295.33-3 package to stay clean), but had the same failures and freezes. Looks like the problem we are experiencing is caused by the security fix… -
Problem using portlet's fork render with simplify url servlet
Hi,
I'm creating a portal with bea weblogic portal and for simplify the urls I'm using the example of edocs to do this.
http://edocs.bea.com/wlp/docs81/url/simplify.html
Everything works fine until i need to use the portlet fork render functionality to increase performance, since now I'm getting the following error:
Error 500--Internal Server Error
java.lang.ClassCastException
at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:257)
at com.bea.netuix.nf.Lifecycle.runOutbound(Lifecycle.java:204)
at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:146)
at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:333)
at com.bea.netuix.servlets.manager.UIServlet.processControlTree(UIServlet.java:220)
at com.bea.netuix.servlets.manager.PortalServlet.doPost(PortalServlet.java:820)
at com.bea.netuix.servlets.manager.PortalServlet.doGet(PortalServlet.java:671)
at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:147)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1072)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:465)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:348)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:328)
at pt.pj.portal.servlets.PageServlet.doGet(PageServlet.java:239)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1072)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:465)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:28)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
at pt.pj.portal.filters.CompressionFilter.doFilter(CompressionFilter.java:58)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
at pt.pj.portal.filters.LogFilter.doFilter(LogFilter.java:41)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6987)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3892)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2766)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
The problem only occurs if I use the simplify url servlet since if i use the portal file directly everything works fine.
Anyone knows what I'm doing wrong?
Thanks in advanced,
rjcAnyone has an answer for my question?
Thanks in advanced
rjc -
Anyone having problems using non-apple mains charger with Classic?
I have 2g nano which works fine with my generic ipod charger. I'm about to upgrade to an 80gb Classic. Anyone have any problems using these?
xavierlopez wrote:
I found this "recipe" in a another forum and it worked!
a) Disconnect all your devices from icloud (ipod, iphone, mac, etc.)
b) Reset and CHANGE your Apple ID password
c) Reconnect all devices
and Voila!
Voila what?
Unless you put the new password in all devices they won't reconnect. -
Insert problem using a SELECT from table with a index by function TRUNC
I came across this problem when trying to insert from a select statement, the select returns the correct results however when trying to insert the results into a table, the results differ. I have found a work around by forcing an order by on the select, but surely this is an Oracle bug as how can the select statements value differ from the insert?
Platform: Windows Server 2008 R2
Oracle 11.2.3 Enterprise edition
(I have not tried to replicate this on other versions)
Here are the scripts to create the two tables and source data:
CREATE TABLE source_data
ID NUMBER(2),
COUNT_DATE DATE
CREATE INDEX IN_SOURCE_DATA ON SOURCE_DATA (TRUNC(count_date, 'MM'));
INSERT INTO source_data VALUES (1, TO_DATE('20120101', 'YYYYMMDD'));
INSERT INTO source_data VALUES (1, TO_DATE('20120102', 'YYYYMMDD'));
INSERT INTO source_data VALUES (1, TO_DATE('20120103', 'YYYYMMDD'));
INSERT INTO source_data VALUES (1, TO_DATE('20120201', 'YYYYMMDD'));
INSERT INTO source_data VALUES (1, TO_DATE('20120202', 'YYYYMMDD'));
INSERT INTO source_data VALUES (1, TO_DATE('20120203', 'YYYYMMDD'));
INSERT INTO source_data VALUES (1, TO_DATE('20120301', 'YYYYMMDD'));
INSERT INTO source_data VALUES (1, TO_DATE('20120302', 'YYYYMMDD'));
INSERT INTO source_data VALUES (1, TO_DATE('20120303', 'YYYYMMDD'));
CREATE TABLE result_data
ID NUMBER(2),
COUNT_DATE DATE
);Now run the select statement:
SELECT id, TRUNC(count_date, 'MM')
FROM source_data
GROUP BY id, TRUNC(count_date, 'MM')You should get the following:
1 2012/02/01
1 2012/03/01
1 2012/01/01Now insert into the results table:
INSERT INTO result_data
SELECT id, TRUNC(count_date, 'MM')
FROM source_data
GROUP BY id, TRUNC(count_date, 'MM');Select from that table and you get:
1 2012/03/01
1 2012/03/01
1 2012/03/01The most recent month is repeated for each row.
Truncate your table and insert with the following statement and the results should now be correct:
INSERT INTO result_data
SELECT id, TRUNC(count_date, 'MM')
FROM source_data
GROUP BY id, TRUNC(count_date, 'MM')
ORDER BY 1, 2;If anyone has encountered this behavior before could you please let me know, I can't see that I am making a mistake as the selects results are correct they should not differ from what is being inserted.
Edited by: user11285442 on May 13, 2013 5:16 AM
Edited by: user11285442 on May 13, 2013 6:15 AMHi,
welcome to the forum. I cannot reproduce the same behavior.
Could you please post the SQLPlus output while executing all commands, like it has been done by S10390?
Also post the output of the following command:
SELECT * FROM v$version;When you put some code or output please enclose it between two lines starting with {noformat}{noformat}
i.e.:
{noformat}{noformat}
SELECT ...
{noformat}{noformat}
Formatted code is easier to read.
Regards.
Al -
Problems using M Audio Fast Track with Garageband
According to the blurb, the M Audio Fast Track (USB) 'is class compliant in Mac OSX offering true plug-and-play operation. Just plug in, and you're ready to start recording'. This is why I bought it, but I am experiencing no end of problems actually getting it to register with Garageband '08.
The problems are (a) I cannot hear any sound coming 'through' the Fast Track and Garageband (b) I can hear the guitar if I plug the headphones into the Fast Track, but nothing is recorded in Garageband (c) my mic, which is plugged into the line socket intended for guitars because I don't have the larger connection, reports no sound at all.
Any ideas, or tips to how others have managed to set up this 'plug-and-play' device would be greatly welcomed.Did you ever get this to work? I just today bought a Fast Track Pro. I have it hooked to my MBP via USB. I can see in control Panel two inputs:
M-Audio Fast Track Pro UDB: Line Input
M-Audio Fast Track Pro UDB: S/PDIF
Problem is, there is no sound registering on the Input Level on either choose.
I have the Power On and have tried both Input 1 & 2, bith in stereo and mono mode.
(Just to be clear, I connect the electric guitar directly to the Fast track pro, correct?)
I have read the owners manual but it is worthless. I thought this would be easy to set up.
Also note that GarageBand preferences the Audio Output and Input are selected to Fast Track Pro.
What am I doing wrong? -
Error using a Array of Loaders with externals SWFs, Camera and Gyroscope ANE
Hi all. Unfortunately I have no idea where could be problem.
I am developing an AR mobile game, currently only for Android, since I can not make the Gyroscope ANE to work in IOS 6.1.3, where no data is returned from the gyroscope (this may be other future post).
The game combines camera, gyroscope and dynamically add to the stage external SWFs. Each SWFs is loaded in a "Stuff" class that extends from Loader. I control its content from the main game class. And the Stuff class that extends from Loader has another objects properties as MovieClips, another Loader, and some TextFields and Sounds.
The game dinamically creates new Stuffs, add them to an Array, and when the player "beat" the Stuff, the Stuff is removed from the stage, each Stuff object is set to null, the Stuff is spliced from the Array and finally, System.gc() is used to recover all the memory. The maximum of Stuffs in the array (and in the stage) is 3. When the level is finished, all the objects are set to null (including the gyroscope and camera), the array is spliced and set to null too, garbage collector forced and when a new level is started all the variables/objects are set again.
The problem is this: independently of the level, sometime between 32 and 37 times that I add a new Stuff to the Array and to the stage, the game stops working. A "back" button on stage does not respond, and any action in the game is ignored. In that moment, the memory (measured with System.totalMemory/1024 and displayed on screen) leaks from a 4500/6500 to 11000, the camera keeps working as the background image and the only way to exit the app is killing it from a task manager.
Another strange thing is that every time I recreate the gyroscope object the it becomes "more sensitive", like the setInterval(100) only the first time is called sets that interval, and from the second that time it seems to be lower.
Any help will be very appreciated.
Thanks in advance.Could you please open a new bug report on this over at bugbase.adobe.com? When adding the bug, please include sample code or an application so we can quickly test this out internally. If you'd like to keep this private, feel free to email the attachment to me directly ([email protected]).
Once added, please post back with the URL so that others affected can add their comments and votes.
Thanks,
Chris
Maybe you are looking for
-
Can't update Boot Camp from 3.1 to 3.2 in Windows 7 (32-bit)
The update starts to install, then I have to restart to finish updating, but when I do just that and fire up Windows 7 Boot Camp still tells me it's version 3.1. THis happens when I update via Apple Software Update. When I download the installer pack
-
Inability to assign freight vendor at header condition level
Hello all We are working on ECC 5.0 but will shortly be moving to ECC 6.0. We have a scenario where raw materials are purchased from one vendor and delivered by a freight carrier (for which we are liable). To satisfy a Finance requirement to capture
-
hi experts, I had installed ecc 6.0 , while installation i had selected EP, ep core and Process Integration component also. i want to configure the SAP XI , how can i do it plz help me Edited by: kavitha l on Jan 17, 2008 5:53 AM
-
Conver Normal accounts to being Business Accounts ...
I have been trying to set up Skype Business Manager for our staff in work. However one of the IT staff, has decided to create accounts for around 20 of the staff, themselves and link them to their "company email address" these are set up as "normal s
-
I did an update to iOS 4.2 and now several of my apps won't work. Help!