Problems using hotmail after Hotmail upgrade

Hotmail recently did an upgrade. Since then I am not able to type when I try to reply to any emails.
I just get a blank area for typing the reply and I am unable to take the cursor there or type.

It's a problem on Microsoft's end. They screwed up the upgrade for a lot of people. So far their advice seems to be to use Google Chrome, since that doesn't seem to have issues with the site.

Similar Messages

Hi support team, I'm using iphone4, After i upgraded my ios7 i'm facing issues.Need ur help

Hi support team, I'm using iphone4, After i upgraded my ios7.0.2 i'm facing issues.
- Unable to view the incoming calls.
- mobile hanging

This is not the "support team". These are user to user forums. You are not addresssing Apple's "support team" by posting here.
Which of the troubhleshooting steps listed in the iOS 7 user guide have you tried? Have you tried a reset?

Problems using Hotmail and Twitter in Firefox

I'm having problems using both Hotmail and Twitter in Firefox (and Google Chrome) but they both seem to work fine in Internet Explorer. I can log-in to both sites but in Hotmail the drop-down menus and links don't work, and in Twitter the stream does not appear at all.
I've tried everything: deleted cache, history, cookies, disabled add-ons etc... I've also tried re-installing both new and older versions of Firefox and I've still had no joy. If anybody has any ideas for a fix I'd really appreciate it. I can't stand using IE but I am forced to at the moment.

My problem with Firefox & yahoo seems similar - so you are not alone.

Problem with Java after System Upgrade to 10.5.7

Hi,
I am facing problem with Java after having run Software upgrades.
Here is the whole story. I recently moved to iMac 10.5.6 from PowerPc 10.4. On this new machine I was having problem running a 3rd party application, which requires JVM. As this application worked well on Tiger, I decided to upgrade JVM on my iMAC using Software Upgrade(was I insane!!). As I like my systems to be updated (as with linux on my personal machine) I clicked "install all". As a result I have the following upgrades run on my machine:
2009-05-20 13:12:01 +0200: Installed "Mac OS X Update Combined" (10.5.7)
2009-05-20 13:12:10 +0200: Installed "Remote Desktop Client Update" (3.2.2)
2009-05-20 13:12:26 +0200: Installed "Java For Mac OS X 10.5 Update 2" (1.0)
2009-05-20 13:58:36 +0200: Installed "Java for Mac OS X 10.5 Update 3" (1.0)
2009-05-20 13:58:44 +0200: Installed "AirPort Utility Software Update 2009-001" (5.4.1)
2009-05-20 13:59:07 +0200: Installed "QuickTime" (7.6)
2009-05-20 13:59:22 +0200: Installed "iPhoto Update" (7.1.5)
2009-05-20 13:59:28 +0200: Installed "iLife Support" (9.0.2)
2009-05-20 13:59:38 +0200: Installed "iDVD Update" (7.0.3)
2009-05-20 13:59:58 +0200: Installed "iTunes" (8.1.1)
But now, simply running $ java on the prompt hangs, i.e. it takes no action.
$ which java
/usr/bin/java
$ ls -ltr /usr/bin/java
May 20 15:09 /usr/bin/java -> /System/Library/Frameworks/JavaVM.framework/Versions/Current/Commands/java
$java (no response)
Here is the output of $ top
PID COMMAND %CPU TIME #TH #PRTS #MREGS RPRVT RSHRD RSIZE VSIZE
703 java 98.8% 0:38.54 3 110 72 480K 184K 1964K 40M
Any clues?
cheers

Hi man,
In the wake of this java problem I resorted to keep working on my old machine, and today in my spare time I tried to fix this new machine.
So I execute $java on prompt, and then try to check the files it has opened, using lsof -p pid
I see it referring to
/System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Home/bin/java
isn't this usually the JAVA_HOME
However, executing $/System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Home/bin/java
hangs!!
but
$/System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/bin/java
works!!
$ pwd
/System/Library/Frameworks/JavaVM.framework/Versions/1.6/Home/bin
$ ./java -version
java version "1.6.0_07"
Java(TM) SE Runtime Environment (build 1.6.0_07-b06-153)
Java HotSpot(TM) 64-Bit Server VM (build 1.6.0_07-b06-57, mixed mode)
So, I changed the links as follows
borgraf:Versions raveesh$ l
total 72
drwxr-xr-x 3 root wheel 102 Mar 6 2008 1.3.1
lrwxr-xr-x 1 root wheel 3 May 21 19:42 1.4.1 -> 1.4
drwxr-xr-x 8 root wheel 272 May 21 19:42 1.6.0
lrwxr-xr-x 1 root wheel 3 May 21 19:44 OldCurrentJDK -> 1.5
lrwxr-xr-x 1 root wheel 5 May 21 19:44 1.4 -> 1.4.2
lrwxr-xr-x 1 root wheel 5 May 21 19:44 1.3 -> 1.3.1
lrwxr-xr-x 1 root wheel 5 May 21 19:44 1.5 -> 1.5.0
drwxr-xr-x 8 root wheel 272 May 21 19:44 1.4.2
drwxr-xr-x 8 root wheel 272 May 21 19:44 1.5.0
lrwxr-xr-x 1 root wheel 5 May 21 19:44 1.6 -> 1.6.0
lrwxr-xr-x 1 root wheel 1 May 21 19:44 OldCurrent -> A
drwxr-xr-x 8 root wheel 272 May 21 19:44 A
lrwxr-xr-x 1 root wheel 3 Jun 4 17:14 CurrentJDK -> 1.6
lrwxr-xr-x 1 root wheel 3 Jun 4 17:21 Current -> 1.6
Linking my Current and CurrentJDK to 1.6 and it works!
However, shall that be the reason!
what is in your /Versions/Current/
I got the following
$ ls /System/Library/Frameworks/JavaVM.framework/Versions/Current
CodeResources Frameworks JavaVM
Commands Headers Resources
There is no /Home in here, which is usually the case for /1.5 or /1.6
Anyways, things seems to work for the moment. Lets see if I get problem with using Java.
thanks

Problems with games after leopard upgrade

After i upgraded to leopard iv been having trouble with some games (like bf 2142), they wont open, as soon as i click on the game it quits right away, anyone having this problem too? or anyone have any solutions??
:?

Good morning Mogens Pedersen
Thanks for using our forum
I am a Cisco network support engineer, I have a recommendation, before you upgrade any device in the future. Always keep in mind to make a backup of your data, in this way if you have to reset the device to factory settings you will not lose that information. Having said that, reset the router to the fabric configuration using the back little button, remember when you do that, you are going to loose your current configuration.
Also here I leave a link for you to download the firmware rescue utility for your router:
http://www.cisco.com/cisco/software/release.html?mdfid=282414010&release=4.0.0.7&relind=AVAILABLE&softwareid=282465800&rellifecycle=&reltype=latest
I hope you find this answer useful, if it was satisfactory for you, please mark the question as Answered
and please rate helpful posts
Greetings,
Johnnatan Rodriguez Miranda.
Cisco network support engineer

Problems with rv042g after software upgrade

after software upgrade it reboot the router about every 45 sec
I've tried this tool from the Cisco website RV0xxV3_FirmwareRescueUtility_v4.0.0.7 without success, the problem is there, is a way you can get the router up and running again ?
Can i run a TFTP server and upload a new software, or i ther a FirmwareRescueUtility for rv042g ??
Mogens from Demmark

Good morning Mogens Pedersen
Thanks for using our forum
I am a Cisco network support engineer, I have a recommendation, before you upgrade any device in the future. Always keep in mind to make a backup of your data, in this way if you have to reset the device to factory settings you will not lose that information. Having said that, reset the router to the fabric configuration using the back little button, remember when you do that, you are going to loose your current configuration.
Also here I leave a link for you to download the firmware rescue utility for your router:
http://www.cisco.com/cisco/software/release.html?mdfid=282414010&release=4.0.0.7&relind=AVAILABLE&softwareid=282465800&rellifecycle=&reltype=latest
I hope you find this answer useful, if it was satisfactory for you, please mark the question as Answered
and please rate helpful posts
Greetings,
Johnnatan Rodriguez Miranda.
Cisco network support engineer

Problems using hotmail

Using 3.6.12 version of firefox or any browser on this computer for that matter, hotmail allows login and then instantly crashes when trying to send an email. I have tried i.e and firefox with the same result on both.

It's a problem on Microsoft's end. They screwed up the upgrade for a lot of people. So far their advice seems to be to use Google Chrome, since that doesn't seem to have issues with the site.

Problem using Hotmail with Mail

I recently installed leopard and configured a hotmail account to use with mail, but the problem is that every time I open Mail, it downloads all the emails from the account, and even if I delete them or mark them as read, the next time I open mail, they'll show up again, and it's very annoying. Any solution other than deleting all the emails on the hotmail account??
Thanks

P.S. I just noticed another issue here: everytime I receive a message in my hotmail account, it shows up twice in Mail. The first problem is more important, but this one's annoying too..Any clue?

IPhone Sync Problems with VISTA After iTunes Upgrade to 7.4

Upon upgrading to iTunes 7.4 I was unable to sync my Outlook calendar or contacts to the iPhone. Called Apple Support that they seemed to know nothing about this problem general problem despite all of the discussions on this and many other tech. boards.
After being told remove and reinstall iTunes and Outlook, set-up a new user account, etc... (none of which worked) I finally concluded that perhaps the .pst file being used by outlook was simply incompatible with iTunes for some reason (e.g. unsupported recurring calendar items).
SOLUTION: Create a new outlook .pst data file. Once created, open up that new file along with the defective .pst file. Then, simply change the view of calendars and contacts in your old calendar such that you can see all of the items in a list. Highlight the items you want to keep and simply click-and-drag them to the nes .pst file. This solves all of the sync. problems I had post-7.4 upgrade. It takes less than 3 minutes to complete this painless fix.
This was so annoying for me that I'd be happy to help someone complete this simple task if they need help. < Edited by Host, for your protection, no personal information please. >

Then it would appear to be an issue with your router. What router? Model? Is the firmware up to date?

(new?) performance problem using jDriver after a Sql Server 6.5 to 2000 conversion

Hi,
This is similar - yet different - to a few of the old postings about performance
problems with using jdbc drivers against Sql Server 7 & 2000.
Here's the situation:
I am running a standalone java application on a Solaris box using BEA's jdbc driver
to connect to a Sql Server database on another network. The application retrieves
data from the database through joins on several tables for approximately 40,000
unique ids. It then processes all of this data and produces a file. We tuned
the app so that the execution time for a single run through the application was
24 minutes running against Sql Server 6.5 with BEA's jdbc driver. After performing
a DBMS conversion to upgrade it to Sql Server 2000 I switched the jDriver to the
Sql Server 2000 version. I ran the app and got an alarming execution time of
5hrs 32 min. After some research, I found the problem with unicode and nvarchar/varchar
and set the "useVarChars" property to "true" on the driver. The execution time
for a single run through the application is now 56 minutes.
56 minutes compared to 5 1/2 hrs is an amazing improvement. However, it is still
over twice the execution time that I was seeing against the 6.5 database. Theoretically,
I should be able to switch out my jdbc driver and the DBMS conversion should be
invisible to my application. That would also mean that I should be seeing the
same execution times with both versions of the DBMS. Has anybody else seen a
simlar situation? Are there any other settings or fixes that I can put into place
to get my performance back down to what I was seeing with 6.5? I would rather
not have to go through and perform another round of performance tuning after having
already done this when the app was originally built.
thanks,
mike

Mike wrote:
Joe,
This was actually my next step. I replaced the BEA driver with
the MS driver and let it run through with out making any
configuration changes, just to see what happened. I got an
execution time of about 7 1/2 hrs (which was shocking). So,
(comparing apples to apples) while leaving the default unicode
property on, BEA ran faster than MS, 5 1/2 hrs to 7 1/2 hrs.
I then set the 'SendStringParametersAsUnicode' to 'false' on the
MS driver and ran another test. This time the application
executed in just over 24 minutes. The actual runtime was 24 min
16 sec, which is still ever so slightly above the actual runtime
against SS 6.5 which was 23 min 35 sec, but is twice as fast as the
56 minutes that BEA's driver was giving me.
I think that this is very interesting. I checked to make sure that
there were no outside factors that may have been influencing the
runtimes in either case, and there were none. Just to make sure,
I ran each driver again and got the same results. It sounds like
there are no known issues regarding this?
We have people looking into things on the DBMS side and I'm still
looking into things on my end, but so far none of us have found
anything. We'd like to continue using BEA's driver for the
support and the fact that we use Weblogic Server for all of our
online applications, but this new data might mean that I have to
switch drivers for this particular application.Thanks. No, there is no known issue, and if you put a packet sniffer
between the client and DBMS, you will probably not see any appreciable
difference in the content of the SQL sent be either driver. My suspicion is
that it involves the historical backward compatibility built in to the DBMS.
It must still handle several iterations of older applications, speaking obsolete
versions of the DBMS protocol, and expecting different DBMS behavior!
Our driver presents itself as a SQL7-level application, and may well be treated
differently than a newer one. This may include different query processing.
Because our driver is deprecated, it is unlikely that it will be changed in
future. We will certainly support you using the MS driver, and if you look
in the MS JDBC newsgroup, you'll see more answers from BEA folks than
from MS people!
Joe
>
>
Mike
The next test you should do, to isolate the issue, is to try another
JDBC driver.
MS provides a type-4 driver now, for free. If it is significantly faster,
it would be
interesting. However, it would still not isolate the problem, because
we still would
need to know what query plan is created by the DBMS, and why.
Joe Weinstein at BEA
PS: I can only tell you that our driver has not changed in it's semantic
function.
It essentially send SQL to the DBMS. It doesn't alter it.

Wifi problems on Macbook after Yosemite upgrade

I am having very serious problems with wifi connectivity of my Macbook Pro Retina after upgrading for OS X 10.10 by the end of October .
Of course this has a great impact on system usability since almost exclusively use wifi to connect to the network.
I must say I never expected that in Apple world a problem of this magnitude take so long to solve!
After trying various proposed solutions without result, two weeks ago in a user forum I found a simple turn around that effectively minimizes the problem on my Macbook.
Deactivating Bluetooth Wifi connectivity becomes less unstable and can work continuously with the networked PC. There continues to be an abnormally high rate of errors affecting eg Time Machine but the wifi connection does not drop.
It's a little ridiculous I can not use my Magic Mouse but it is less problematic that not to have Network!
But someone can direct me to a date that provides for the effective resolution of this problem by Apple? Or at least that the problem has been recognized and is being done something to fix it?
My system is yet under warrant. Should I activate the warranty and ask for the replacement of the Macbook? From what I've read not all users have this problem with Yosemite.
Can someone please explain to me the reasons why I have the problem and others with theoretically equal machines do not have it (it that is the case)?
Thanks in advance,
Fernando Ribeiro

I installed last OS X update, 10.10.3, and the problem is completely solved.
The problem, Wifi+Bluetooth, is clearly addressed on the update notes.
Now I am working with Magic Mouse, Bluetooth, while navigating on the Internet via Wifi.
Thanks

[SOLVED] Problems autostarting xbmc after nvidia upgrade

Hello!
With nvidia version 302.17-1 and with 302.17.2 xorg errors and fails when autostarting xbmc.:
Here is my Xorg.0.log: https://gist.github.com/3118969
Here is my xorg.conf:
https://gist.github.com/3118996
But downgrading nvidia and nvidia-utils to version 295.59 makes everything work again.
So is this considered as a bug or can I change my configuration to make it work with latest nvidia drivers?
My graphics card is PCI and not PCIe, maybe there is some problem with old PCI cards?
I am now using standard xbmc package in repositories (earlier I used xbmc-pvr-git but I changed to standard xbmc to see if it was a problem even without using AUR packages).
Last edited by ronnylov (2012-07-17 14:04:32)

Thanks. But I got another problem now because I can't upgrade from nvidia 295.59 to the latest version. There is some kind of dependency problem, probably because of the switch from /lib to /usr/lib.
[ronny@htpc ~]$ sudo pacman -Syu
Lösenord:
:: Synkroniserar paketdatabasen...
core är senaste versionen
extra är senaste versionen
community är senaste versionen
:: Påbörjar full systemuppgradering...
löser beroenden...
letar efter inre konflikter...
Mål (3): cairo-1.12.2-2 nvidia-302.17-2 nvidia-utils-302.17-1
Total Installationsstorlek: 54,02 MiB
Nettouppgraderingsstorlek: 0,69 MiB
Fortsätt med installation? [Y/n]
(3/3) kontrollerar paketintegritet [######################] 100%
(3/3) laddar paketfiler [######################] 100%
(3/3) kontrollerar filkonflikter [######################] 100%
fel: misslyckades att påbörja överföringen (motstridiga filer )
nvidia: /usr/lib/modules/extramodules-3.4-ARCH/nvidia.ko.gz existerar i filsystemet
Fel uppstod, inga paket uppgraderades.
[ronny@htpc ~]$
Trying to following the info here https://wiki.archlinux.org/index.php/De … iki:usrlib:
[ronny@htpc ~]$ grep '^lib/' /var/lib/pacman/local/*/files
/var/lib/pacman/local/nvidia-295.59-1/files:lib/
/var/lib/pacman/local/nvidia-295.59-1/files:lib/modules/
/var/lib/pacman/local/nvidia-295.59-1/files:lib/modules/extramodules-3.4-ARCH/
/var/lib/pacman/local/nvidia-295.59-1/files:lib/modules/extramodules-3.4-ARCH/nvidia.ko.gz
OK the old package installed files in the wrong place when I downgraded nvidia after the update to /usr/lib.
These packages need rebuilding so as not to include the /lib directory. They can also simply be uninstalled and reinstalled again after upgrading glibc.
So I try to uninstall nvidia and nvidia-utils:
[ronny@htpc ~]$ sudo pacman -Rs nvidia nvidia-utils
Lösenord:
kontrollerar beroenden...
fel: misslyckades att förbereda överföring (kunde inte tillfredställa beroenden)
:: libva: behöver libgl
:: mesa: behöver libgl
:: mplayer: behöver libgl
:: xorg-xdriinfo: behöver libgl
OK then uninstall these packages as well...
[ronny@htpc ~]$ sudo pacman -Rs nvidia nvidia-utils libva mesa mplayer xorg-xdriinfo
kontrollerar beroenden...
fel: misslyckades att förbereda överföring (kunde inte tillfredställa beroenden)
:: ffmpeg: behöver libva
:: freeglut: behöver mesa
:: glew: behöver mesa
:: gnome-mplayer: behöver mplayer
:: vdpau-video: behöver libva
:: xbmc: behöver libva
:: xorg-utils: behöver xorg-xdriinfo
and I get even more dependency problems.. I am a little bit new on this but do I need to reinstall almost everything just to uninstall a video driver? I just want to replace the old driver with the new one...
I think I need a hint of how to solve my problem. Perhaps this thread belongs somewhere else in the forum?
Last edited by ronnylov (2012-07-17 11:01:31)

Problems using Keyboard after installing Snow Leopard

hey Everyone I'm using a 13.3" Macbook Pro (summer 2009) and I recently took the plunge of installing Snow Leopard. I've installed the two new upgrades for it as well, but I am having troubles with my keyboard specifically in regards to copy/pasting, using the command Key short cut and even the delete button.
If anyone is having these problems as well let me know! And also if there are any quick fixes for this.

I'm also having an issue with my keyboard after upgrading to snow leopard, but not on my laptops native keyboard, that works just fine.
My issue is that I switched the Control and Command keys in the Keyboard > Modifier Keys... settings for all of the keyboards in the drop down menu so Control = Command and Command = Control.
This change worked correctly for my native laptop keyboard, but my external aluminum USB Apple keyboard (which is plugged into the USB port of my apple LED Cinema Display monitor) did not switch.
I've reset all of the modifier keys back to default settings and started over again several times, I've switch the USB port my keyboard was plugged into to another port on the monitor and even another port on the laptop, but nothing seems to work. It's driving me crazy, please help!

Problems with Numbers after Mavericks upgrade

After upgrading to Mavericks my existing spreadsheets do not have the formulas in the open cells. All previously entered data seems to still be in tact but when putting new data or figures in cells they do not have the formula or format the original spreadsheet had.

Good morning Mogens Pedersen
Thanks for using our forum
I am a Cisco network support engineer, I have a recommendation, before you upgrade any device in the future. Always keep in mind to make a backup of your data, in this way if you have to reset the device to factory settings you will not lose that information. Having said that, reset the router to the fabric configuration using the back little button, remember when you do that, you are going to loose your current configuration.
Also here I leave a link for you to download the firmware rescue utility for your router:
http://www.cisco.com/cisco/software/release.html?mdfid=282414010&release=4.0.0.7&relind=AVAILABLE&softwareid=282465800&rellifecycle=&reltype=latest
I hope you find this answer useful, if it was satisfactory for you, please mark the question as Answered
and please rate helpful posts
Greetings,
Johnnatan Rodriguez Miranda.
Cisco network support engineer

Can't use slim after recent upgrade

Hi all,
Just did pacman -Syu and now I can't use slim to login anymore. I searched the forum but I didn't see any other complaints with X and upgrades, lately.
This is the end of my pacman.log
[2010-08-26 08:33] synchronizing package lists
[2010-08-26 08:34] starting full system upgrade
[2010-08-26 08:34] upgraded bison (2.4.2-1 -> 2.4.3-1)
[2010-08-26 08:34] upgraded evince (2.30.3-1 -> 2.30.3-2)
[2010-08-26 08:34] upgraded glproto (1.4.11-2 -> 1.4.12-1)
[2010-08-26 08:34] upgraded kbproto (1.0.4-1 -> 1.0.5-1)
[2010-08-26 08:34] upgraded libfetch (2.32-1 -> 2.33-1)
[2010-08-26 08:34] upgraded libxau (1.0.5-1 -> 1.0.6-1)
[2010-08-26 08:34] upgraded libxcb (1.6-1 -> 1.7-1)
[2010-08-26 08:34] upgraded libx11 (1.3.4-1 -> 1.3.5-1)
[2010-08-26 08:34] upgraded libxi (1.3-2 -> 1.3.2-1)
[2010-08-26 08:34] upgraded mlocate (0.22.4-1 -> 0.22.4-2)
[2010-08-26 08:34] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
[2010-08-26 08:34] upgraded pacman-mirrorlist (20100808-1 -> 20100825-1)
[2010-08-26 08:34] upgraded renderproto (0.11-1 -> 0.11.1-1)
[2010-08-26 08:34] upgraded sqlite3 (3.7.0.1-1 -> 3.7.1-1)
[2010-08-26 08:35] upgraded tzdata (2010k-1 -> 2010l-1)
[2010-08-26 08:35] upgraded videoproto (2.3.0-1 -> 2.3.1-1)
[2010-08-26 08:35] upgraded xorg-server-utils (7.5-4 -> 7.5-6)
[2010-08-26 08:35] upgraded xorg-utils (7.6-2 -> 7.6-3)
[2010-08-26 08:35] upgraded xterm (259-1 -> 261-1)
Because of the xorg pkg. upgrades, I first thought X problems with my nvidia card but I found if I don't use slim, I can startx from console with no problem. I found if I changed to a different tty, killed x, etc. I could login and startx but the session would only last a couple of minutes and x would die. Seemed to do this even if I stopped slim with /etc/rc.d/slim stop but I was messing around with so many things that I can't be sure I actually stopped slim. As long as I didn't start it, everything seems to be fine.
The slim log isn't much help--it just mentions unable to connect to xserver, so for slim, it seems the upgrade to xorg-utils or xorg-server-utils is a problem.
Personally, I prefer to use no login manager anyway but this is on the main home computer and the wife likes to see a nice login screen (she doesn't like changes to the computer setup much).
Last edited by bgc1954 (2010-08-26 17:37:32)

Hello!
I'm experiencing the same problem: since I updated my system with 'pacman -Syu' slim no longer works on my laptop. More precisely, in place of the usual login screen of slim I get a black screen without prompt, but I still can use Ctrl-Alt-F1 to login in on tty. I tried to start slim from rc.conf or from inittab, no difference.
This problem does not seem to be related to Xorg and my (trident) video driver, as I believed first: replacing slim by lxdm without changing anything else solved the problem completely. Nevertheless I was very fond of the simplicity of slim and I would prefer to use it again if possible, but I have absolutely no idea of what is going on.
@Iceman81: I followed your link without understanding how to use the information there.
@bgc1954: Did you eventually solve your problem?
@Everybody: Could anyone give me a hint? I'm an ordinary Arch user, not a "master of Kyudo".
Regards,
LuX.

Problems using hotmail after Hotmail upgrade

Similar Messages

Maybe you are looking for