Problems using iBook OS X 10.2.8 with D-link router

I have a 6 year old iBook OS X 10.2.8 and I can't connect to the internet using a D-link router DIR-655. The password for the router is not recognized by my iBook. I am using the airport card. Please help...

Hello agaben99,
First of all, Welcome to the  Discussion forums!
I may be wrong, I am not an expert with regards to using wireless/routers but I think the minimum system requirements might be 10.4 +.
Minimum System Requirements: Computer with: Windows XP SP2 or Mac OS X (v10.4). Internet Explorer v6 or Mozilla Firefox v1.5. CD-ROM Drive. Network Interface Card. For Internet Access: Cable or DSL Modem. Subscription with an Internet Service Provider (ISP).
hope that helps some,
LS

Similar Messages

Using the Airport Express as an Extender with D-link router

I just received an Airport Express as a Christmas gift and am having trouble setting it up with the D-Link N router that I have. I have searched all of the internets and have not found anything confirming whether or not these two items are compatible with each other; some people say they are, some say otherwise- I thought I would ask the experts.
I plugged in the express and tried to set it up, but when it asks what base station it needs to connect to, it won't recognize the D-Link router (I know that the D-Link router isn't a base station).
Is there anyway to make the express I have extend my wireless network?

They are not.
There are very few Routers that are WDS compatible.
Very few can be used to extend a Network.
If you use all Airport Products then you can extend.
http://docs.info.apple.com/article.html?artnum=107454
Don
Message was edited by: Donald Morgan

Is there any known problem using Oracle SQL Developer 3.0.04 with Java 1.7?

I'm new to Oracle. I have installed Oracle SQL Developer 3.0.04 and Java 1.7. When I run Oracle SQL Developer, I will get the window Running this product is supported with minimum Java version of 1.6.0_04 and a maximum version less than 1.7. This product will not be supported....
Is there any known problem using Oracle SQL Developer 3.0.04 with Java 1.7?
I have already downloaded Java 1.6 but don't know whether I need to uninstall Java 1.7 first. If don't need to uninstall Java 1.7, how can I set Oracle SQL Developer to run with Java 1.6?
Thanks for any help.
Edited by: 881656 on Aug 25, 2011 11:22 AM

Hi,
One prior post discussing the use of Java 7 is:
SQL Developer 3.0 and Java SE 7?
There is no need to uninstall any Java version (except if you have disk space constraints) and no problem switching between Java versions. This may be controlled in the sqldeveloper.conf file in your ...\sqldeveloper\sqldeveloper\bin directory via the SetJavaHome line. For example:
#SetJavaHome ../../jdk
SetJavaHome C:/Program Files/Java/jdk1.6.0_26
#SetJavaHome C:/Program Files/Java/jdk1.7.0Regards,
Gary Graham
SQL Developer Team

Why my iphone 4 connect to wifi, but when i open safari and search something it say i not connect.. but in the same house my sister using iphone4 too but she can online with the same router

why my iphone 4 connect to wifi, but when i open safari and search something it say i not connect.. but in the same house my sister using iphone4 too but she can online with the same router. i go and check over the detail of the network i connected, over the ip address and subnet mask have the numbers, but over the DNS and router don't have any number...isit the problem???? i can online at any other place but just my home cant...y????

Hey confuddled_chica!
Try the steps in the article below to troubleshoot this issue:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

Problems using jdk 1.4.0-beta 2 with JDeveloper 3.2.3

I've problems using the jdk 1.4.0-beta 2 with JDeveloper 3.2.3.
Used jdk 1.3.1 before, evertything worked correctly, accept a smal prob with the minimize- and maximize-icons of JInternalframe.
Got mail that this would be solved with new jdk.
But when i define new JDK in JDeveloper and try to compile i get the following message:
Error: (0) initialization error: class Error const *: class file has wrong version 48.0, should be 45.3 or 46.0.
If i compile the code from the commandline with javac myself it compiles correctly and the program runs fine.
can anyone help??

The problem you are having is that jdev doesn't support the new beta..I have the same problem and I am currently compiling and executing from the command line
I heard there is a workaround but I have never found it
sorry

I have a problem using ibooks app

[IMG]http://i62.tinypic.com/28tf12u.jpg[/IMG]
There is an error , it says this document can only be experienced on iPad
The doc that i'm trying to open is a part of a iTunes U course.
Please if anyone knows the way to convert this doc or open it with iPhone , please HELP
THANK YOU ALL :-)

If it's for iPad then you can't read it on iPhone.
You might be able to read it on your Mac if you have one.
Message was edited by: ckuan

Problem Using Zoom H4 as an Audio Interface with Garageband

I'm new to GB and I am having problems getting started using my Zoom H4 as an Audio Interface with Garageband on my iMAC.
I'm fairly certain that I have the connection and all of the setting configurations correct, and yet I cannot get any sound from the H4 into GB.
I do see the sound volume registering in the Input Level window of the H4, but not in GB.
Here is what I see in my Garageband:
Preferences >
Audio/MIDI >
- System Setting
- Built-in Microphone
- Built-in Input
- H4 Audio IN (when H4 is connected to the iMAC via USB)
Of course I have selected the H4.
Any help or insight would be greatly appreciated. Operators standing by!

I don't have a H4 but do have a H2. Did you set the H4 as a audio interface, after you plug it in choose interface in the H4 screen?
Did you choose the H4 input channel in the track info?

Is there a problem using popup LOVs in a portal form with a bind variable?

I have a portal form with 2 LOVs. The second LOV is a dependent LOV whose bind variable can be NULL. I have read Note 263923.1, "How To Create Dependent Lovs In Forms", and my form works as long as I use combo boxes to display the LOVs. I need to use popups so the user can search the LOVs as they are quite lengthy. Plus I want to be able to pick a value from my second LOV without selecting a value from the first LOV -- hence, my bind variable can be null and that is where my problem lies. As long as I select a value from the first LOV, the second LOV popup will work. If I click on the icon to display the second LOV without pre-selected a value from the first LOV, I get the following error:
POPUP LOV ERROR:
LOV: "9A17692880B6B8509F514F5B9CA9EC808DD403218B3CF19A33C04CD1FAB0ADE17ADC33E6B67998A933357CE5264D204E"
Parse Message: Parse as pre-set global: "TORE".
Find Message: LOV is of type DYNAMIC (LOV based on SQL query).
Query: "SELECT ...."
wwv_bind.prepare_bind: ORA-01403: no data found
My form is based on a table with a custom layout. The sql for the second LOV is similar to: SELECT ENAME, EMPNO FROM SCOTT.EMP WHERE (DEPTNO = :DEPT AND :DEPT IS NOT NULL) OR :DEPT IS NULL.
Thanks in advance for any help,
Carol

Don't use EPS any more! It does not support transparency nor color management.
If you save vector files from Illustrator, use AI with PDF compatiblity.
If you save image files from Photoshop, use PSD.
If you save image files combined with vector forms and/or text from Photoshop, use PDP which is a Photoshop PDF.
For vectors from Illustrator use CMYK files.
For images use RGB, conversion to CMYK should never done before PDF export, better, if the printer allows it, is to export a PDF with live transparency as it is PDF/X-4
If the printer requires a PDF with CMYK only export a PDF/X-1a.

Problem using Change production and SFC step status with Simultanious group

Hello,
We just upgraded to ME 5.2 SP5 patch which was released two days back, the problem with Simultanious group is fixed and SFC gets the correct next step as per defined in the router (Previously there was bug).
But when we try to use change production and put SFC in simultanious router at some particular operation as que it is getting in que at all operations and really can be started and completed even at the last operation.
Same is the case with step status if we put it in que at some intermediate operation all operation listed above are becoming in que irrespective of the flow defined in simultanious router.
Please let me know how to handle this.
Regards,
Pushkar Patil

Hi Pushkar,
It seems to be a bug. I would suggest opening a ticket on this.
Regards,
Alex.

Problems using NSS library as PKCS#11 provider with JAVA 6

Hi,
I�m trying to configure JAVA 6 on Solaris 10 SPARC to use Mozilla NSS library as PKCS#11 provider (to achieve FIPS-140 certification for my application). I�m following the guidelines from http://java.sun.com/javase/6/docs/technotes/guides/security/p11guide.html#NSS but unfortunately something doesn�t work for me as expected...
Let me describe the exact steps that I followed (because devil may be in the small details :-)
I downloaded NSS 3.11.4 and NSPR 4.6.4 binaries from mozilla.org (32 bit �debug� versions for Solaris 9, because these were the only �binary� versions for SPARC available on Mozilla site and as far as I understand these are the exact versions that passed FIPS-140 certification), unpacked them under the /opt directory and copied both of them into a single /opt/nss tree as follows:
mkdir /opt/nss
cp �r /opt/nss-3.11.4/* /opt/nss
cp �r /opt/nspr-4.6.4/* /opt/nss
I created a PKCS#11 configuration file /opt/nss/pkcs11.cfg as per JAVA 6 security guide:
name = NSScrypto
nssLibraryDirectory = /opt/nss/lib
nssDbMode = noDb
attributes = compatibility
(I know that this configuration is not for FIPS mode � but I thought that I�d better start with a simple NSS configuration)
Then I modified /usr/jdk/jdk1.6.0_03/jre/lib/security/java.security file and replaced 1st provider with:
security.provider.1=sun.security.pkcs11.SunPKCS11 /opt/nss/pkcs11.cfg
Now everything should be in place � so I created a small JAVA program and ran it:
import javax.crypto.SecretKeyFactory;
import javax.crypto.spec.DESedeKeySpec;
import javax.crypto.SecretKey;
import javax.crypto.Cipher;
import java.security.*;
public class Test
public static void main(String[] args)
try
SecretKeyFactory keyFactory = SecretKeyFactory.getInstance("DESede");
DESedeKeySpec keySpec = null;
keySpec = new DESedeKeySpec(new String("laKuf1Tcc6sOhsdPf49=m4es").getBytes());
System.out.println("keyFactory provider: " + keyFactory.getProvider().getName());
SecretKey key = keyFactory.generateSecret(keySpec);
Cipher decryptCipher = Cipher.getInstance("DESede");
decryptCipher.init(Cipher.DECRYPT_MODE, key);
System.out.println("decryptCipher provider: " + decryptCipher.getProvider().getName());
catch (Exception ex)
ex.printStackTrace();
Unfortunately it produced the following output:
EMS-Server42# java test
keyFactory provider: SunPKCS11-NSScrypto
decryptCipher provider: SunJCE
And when I comment out SunJCE provider in java.security file I get the following exception:
java.security.NoSuchAlgorithmException: Cannot find any provider supporting DESede
at javax.crypto.Cipher.getInstance(DashoA13*..)
at test.main(test.java:38)
So it looks like something is wrong with my NSS configuration. Because AFAIK DESede (3DES) is supported by the NSS library, but for some reason JAVA doesn�t see this algorithm implemented in NSS PKCS#11 provider.
Any suggestions on what am I doing wrong?
Best regards,
Alex

Works for me:
import java.security.Provider;
import java.security.SecureRandom;
import java.security.Security;
import javax.crypto.Cipher;
import javax.crypto.SecretKey;
import javax.crypto.SecretKeyFactory;
import javax.crypto.spec.DESedeKeySpec;
import javax.crypto.spec.IvParameterSpec;
public class Test
public static void main(String[] args)
    try
      String configFileName = "/nss/nss.cfg";
      Provider nss = new sun.security.pkcs11.SunPKCS11(configFileName);
      Security.addProvider(nss);
      SecretKeyFactory keyFactory = SecretKeyFactory.getInstance("DESede", nss);
      DESedeKeySpec keySpec = new DESedeKeySpec(new String("laKuf1Tcc6sOhsdPf49=m4es").getBytes("UTF-8"));
      System.out.println("keyFactory provider: " + keyFactory.getProvider().getName());
      SecretKey key = keyFactory.generateSecret(keySpec);
      //iv for CBC mode - note, in practice you don't generate a random iv for decryption :)
      byte[] iv = new byte[8]; //64-bit block size for 3DES
      SecureRandom sr = SecureRandom.getInstance("PKCS11", nss);
      sr.nextBytes(iv);
      IvParameterSpec params = new IvParameterSpec(iv);
      Cipher decryptCipher = Cipher.getInstance("DESede/CBC/NoPadding", nss);
      decryptCipher.init(Cipher.DECRYPT_MODE, key, params);
      System.out.println("decryptCipher provider: " + decryptCipher.getProvider().getName());
    catch (Exception ex)
      ex.printStackTrace();
}Oh, I wouldn't expect your key loading to work when you switch over to FIPS mode.
cfg file:
name = NSScrypto
nssLibraryDirectory = /nss
nssSecmodDirectory = /nss
nssModule = fipsYields the following error:
java.security.spec.InvalidKeySpecException: java.security.InvalidKeyException: Could not create key
because you can't directly handle keying material in FIPS. You'll have to save the secret key in the NSS certDB or generate a random one each time and send it wrapped to the other side.

Does any one have problems using facetime. I can't connect with any of my contacts

I am having trouble connecting with my contacts on facetime and am wondering what I may be doing wrong. Any sugestions???

Did you try the general tips in these articles? iOS: Using FaceTime and iOS: Troubleshooting FaceTime

Problems using Flash player 11.8.800.168 with Firefox 23.0.1 ?

I am trying to use Virtual Credit Card Number software with Firefox. I downloaded Flash Player 11.8.800.168 But when I try to open the Virtual Number software it continues to tell me to install Flash player. Any help out there?

Is this Virtual Credit Card Number software a website or a stand alone application? If stand alone, then I would recommend installing the Active X (Internet Explorer) version that you can download here: http://get.adobe.com/flashplayer/otherversions

Macbook Pro Problems with D-Link Router

My router D-link (Dl-624+A, model available in Asia) 802.11g/2.4 Ghz wireless router serves a G5 iMac, a G4 Aluminum Powerbook plus a Windows laptop and desktop. We have never experienced any problems with the network.
I have recently bought a 17" Macbook Pro 2.4 Ghz laptop (intel MBP) and have not been able, in any combination of modes, to join the network. A dialogue box simply says that there was an error trying to join the network.
I have no problems joining other wireless networks around town its so easy, just the one at home is the problem.
What is going on? Is there a fix? Thanks

Hi, my MacBook Pro can't connect to my D-Link DSL-G604T router via wireless too.
Airport can see my wireless connection and asks for the WEP password to connect. I put the password key in and an error pops up saying it cannot connect. I can connect via an Ethernet cable. Also, my previous system PowerBook G4 is able to connect via to the router via wireless, hence there is nothing wrong with my network.
Based on the suggestions from other threads, I tried to set my security to WPA instead of WEP. However, after I set my security to WPA, and tried to connect to my wireless network, the AirPort popup only gives me 4 options for the Wireless Security:
WEP Password
WEP 40/128-bit hex
WEP 40/128-bit ASCII
LEAP
There isn't an option to use WPA. Can anyone advise?

Use express as a wifi extension wirelessly with 3rd party router

Hello,
I've just purchased an Airport Express. I want to use it to extend the wifi range to upstairs of my Virgin Media Superhub (downstairs).
I have read that you need to connect the two together with an ethernet cable if using a 3rd party router (not Airport Extreme or Time Capsule). I have connected the AE it to my macbook pro via airport utility wirelessly (without an ethernet cable) and the light is green and the signal seems to have slightly extended. So it seems to have worked for my MBP.
The problem is when I use it with my iPhone 5, despite showing up on the airport utility app, when I go close to the Airport express (upstairs) it doesn't improve the wifi signal at all and sometinmes lose signal completely. The airplay also works with my MBP but cuts out with the iPhone.
Is it possible to connect it wirelessly like I have done or have I just been tricked into thinking the signal has improved?
I'm currently running OS 10.8.5 on MBP and iOS 7 on the iphone 5.
I've tried to articulate this easily and I'm sure someone has already asked this but any help would be appreciated.
Thanks

The trick would be to locate the Express where you need more wireless signal coverage and connect it back to the SuperHub using an Ethernet cable.
You can run an Ethernet cable up to 330 feet or 100 meters with no signal loss.
If you cannot run an Ethernet cable, you might want to take a look at a pair of Ethernet powerline adapters to send the Ethernet signal over the AC powerlines in your home. The theory here is that you already have the wiring in place, you just need the adapters.
Any computer/electronics superstore will have a selection of powerline devices on hand from which to choose.
I doubt that you would notice any improvement at all if you located the Expess close the SuperHub, and it might actually interfere with the signal from the SuperHub, so that location would not be recommended.

Problem connecting to public wifi hotspot using ibook and airport

Hi
I have a brand new iBook G4, replacing an iBook G3. At home I use it to connect wirelessly or wired with my Netgear router. No problems.
Yesterday I tried to access a public, unsecured wifi hotspot in a local cafe. There were two other people there using the net, both using iBooks (high Mac density, it seems!).
Whatever I did, I simply couldn't connect. First, using the same Location I use at home (defined to only use Airport), I could see the named network, but when I selected it I got the 'could not connect' dialog. Retried, no luck.
I then created a new location, configured that to use Airport. Same problem.
I then created a new network name, and tried again. No luck. Using this last option, it actually asked me for a WEP password, even though the network was, in fact, unsecured, and the other users had not been asked this.
I do use WEP protection at home.
Any ideas?? I'd like to be mobile and networked, so I'd really like to fix this!

I presume that the iBook G3 worked fine at the location previously?
Some 802.11b access points require a firmware upgrade before 802.11g (Extreme) clients can connect.
Though 802.11g is backward compatible with 802.11b some older access points were developed before 802.11g and therefore are not in a position to allow the 802.11g clients to connect.
Note that you can attempt to persuade an Airport Extreme client to operate in 802.11b mode.
Hold down the control key [ctrl] when selecting the network from the menu.
http://docs.info.apple.com/article.html?artnum=107938
iFelix

Problems using iBook OS X 10.2.8 with D-link router

Similar Messages

Maybe you are looking for