Problems using LG Vortex hotspot with secure sites

I recently upgraded my phone to a LG Vortex so that we can use the hotspot to access the internet from our laptops. We live in the country and this is our only hope for wifi. It works pretty good, however, we can't sign in to email or other secure internet sites. Anytime we try, a page advertising a data plan comes up.
Does anyone have any experience with this or know how to fix it?
Thanks!

I understand that the hotspot feature must be added to your plan and assume you already did this?

Similar Messages

Having problems using ion tape express with itunes cannot find the song on hard drive

Having problems using ION tape express with itunes. The song is on hard drive as temp1 not the name of the song. And I have problems playing it in itunes
because it says it cannot locate the song'

Then correct the name of the song or point iTunes to the new file.
Issues with restoring should be directed to the manufacturer of the backup software/device... this is not an Apple or iTunes issue.

Using SQL Server credentials with Secure Store Target Application for Data Connection in Dashboard Designer

[Using SharePoint 2013 Enterprise SP1]
I would like to use SQL Server credentials in a Secure Store Target Application, and
this page makes it look like it's possible but when I attempt to use the new Target Application ID as authentication for a Data Connection in Dashboard Designer, I get a generic "Unable to access data source" with no error logged in SQL Server
logs.
I am able to use a Target Application with AD credentials to access the SQL db without a problem. Suggestions?

Hi,
1. Make sure that the credential is set to
Secure Store Target Application. Navigate to the Central Administration. Click on the
Application Management. Click on the Manage Service Applications. Click on the
Secure Store Service Application. Select the application ID and from the ECB menu click on the
Set Credentials. Enter the Credential Owner, Windows User Name and the
Windows Password.
2. Make sure that in the Dashboard Designer “Use a stored account” is selected in the “Authentication” and the proper application ID is mentioned.
Please refer to the link below for more information:
http://www.c-sharpcorner.com/Blogs/14527/unable-to-access-data-source-the-secure-store-target-applic.aspx
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Calendar Server 3.5: Problem using user's ID with uniuser -mod command

When there are two users who have the same Common Name (CN) in LDAP but
different User ID's (uid
field), I have a problem using the uid
field as an argument to
uniuser -mod in Netscape Calendar
Server (NCS) 3.5. For example, there may be two users, User1 and User2, who
both have the CN "John Smith." 

User1
uid: jsmith2
sn: Smith
givenname: John
nscalxitemid: 10001:00314
User2
uid: jsmith
sn: Smith
givenname: John
nscalxitemid: 10001:00213

Let's say I want to change the value for nsCalOrgUnit2
for User1 to "jsmith." In NCS 4.0,
I can specify the uid as
an argument to uniuser -mod
. However, in NCS 3.5, if I specify the
uid as an argument to
uniuser -mod, the entry
for the user does not get changed. 

Calendar Server 4.0 

%uniuser -mod "ID=00314" -m "OU2=jsmith/OU3=People" -n 10001
 
uniuser: modified "Smith, John" 

(The LDAP entry for User1 also reflects this change.)

Calendar Server 3.5 

%uniuser -mod "ID=00314" "OU2=jsmith/OU3=People" 10001
 
uniuser: no need to modify "Smith,John" 

(The LDAP entry for User1 does not reflect the change.) 

%uniuser -mod "S=Smith/G=John/ID=00314" "OU2=jsmith/OU3=People"
10001 
uniuser: no need to modify "Smith,John" 

(The LDAP entry for User1 does not reflect the change.) 

If I use the command uniuser -mod "S=Smith/G=John"
"OU2=jsmith/OU3=People" 10001
in NCS 3.5, the script will change the entry of the first "John Smith" in the
database and will cause the LDAP entry for this user to be updated as well.
However, the entry modified may or may not be the correct one. So, in
NCS 3.5, is there a way to specify a particular uid
to ensure that the correct LDAP entry
is modified?

To modify a user's information using the uid
field in Calendar Server 3.5, change
the user.ini file. The
following steps show how to change a user's information by modifying the
.ini file: 

<OL>
<LI>Open the user.ini
file, which is in the path /users/unison/misc/user.ini

<LI>Add a section containing the desired changes. For example, 

[Test] 
OU2 = jsmith 
OU3 = People 

<LI>Run uniuser with
the following options: 

% uniuser -mod "ID=00314" -s Test 10001
</OL>

It turns out to be a problem with the user Keychain. It has some weird entry that was sending the wrong password. I delete all entries to the server and that corrected the problem

Problem using Instant Client 10g with PHP4.3.10-16 on Debian Sarge

Hello,
My current email is [email protected]
I am trying to use PHP on Debian box using Oracle 10gR2 on a RH 4 server. Everything works fine individually, but I cannot get PHP4 to use InstantClient to connect to the Oracle Server. This is what I've done:
Oracle 10gR2 works fine on the RH 4 server. Listener is running and all required OS security is in place and works (TCP_wrappers, etc.).
Client machine runs Debian 3.1 (Sarge). It works fine and SSH connectivity to RH4 server works.
Instant Client 10gR2 installed on Debian client and works fine. Tested SQL*Plus connection to the RH server. I installed Instant Client from the zip file.
I did have to add libclntsh.so to /etc/ld.so.conf and run ldconfig to get Debian to use it, though.
Apache2.0.54-5 on Debian client works fine. Web pages on it can be opened in browsers from other machines.
Installed PHP4.3.10-16 on Debian client using following:
./configure --with-oci8-instant-client=<dir of my choice>
--enable-sigchild
I first checked ./configure help and the option with-oci8-instant-client was there.
Configure went well. Log showed checking for Instant Client files.
Ran make. Saw numerous Instant Client message as words scrolled.
Ran make install. Successful.
Restarted Apache2 with following env variables:
LD_LIBRARY_PATH=<my Instant Client directory)
TNS_ADMIN=<same directory where I put my sqlnet.ora and tnsnames.ora files).
SQLPATH=<same directory>
I know this is correct because Instant Client SQL*Plus can connect.
Browsers on other machines can view simple php scripts run from the Debian box.
BUT, phpinfo does NOT show an OCI8 section.
phpinfo does show the correct extension directory, though.
Somehow, my PHP4 configure and make is not using the --with-oci8-instant-client option.
I checked $PHP4HOME/ext/oci8/config.m4 file and the verbiage IS in there to use the --with-oci8-instant-client option, either with the default location or the extension_dir location.
I tried using the new ZendCore product, even though it is not certified for Debian. It installed okay but I could not get PHP5 to work. I uninstalled it successfully and redid all of the above.
So, any ideas as to what else I can do here? Other than not use Debian (which is probably the wisest thing to do). And I suppose I could install a thick Oracle client, assuming that Debian would take it. But I prefer the Instant Client.
I tried the PHP ./configure syntax I've seen several places on this forum.
./configure --with-oci8=instantclient,<directory>
This syntax may work on Red Hat machines but it throws a syntax error on Debian and aborts the configure.
Thanks for any help.

Thanks, but that did not work. Configure aborts because it cannot find the required OCI8 libraries. The --with-oci8 option is for the Oracle "thick" client. I have only the Instant Client...and am not interested in loading the older client.
I may have my own solution next week, though. I will be loading RH4 on a new server and will then install ZendCore and forget all about using Oracle with Debian.
Update on trying ZendCore on Debian Sarge:
I tried installing it again yesterday. The install seemed go to well, and said it was successful.
It did NOT load PHP5, however. Nor did it load the Instant Client. My previously installed PHP4 and Instant Client remained in my original directories.

Problems using OS10.9.2 with migration assistant to transfer files from imac with OS10.6.8

Having problems using the Migration assistant on a new imac with OS10.9.2 to transfer files from an old imac with OS 10.6.8.

The Migration Assistant can transfer files from a computer running Mac OS X 10.1 or newer, but shouldn't be used to migrate applications from a PowerPC Mac to an Intel Mac.
(35788)

I am trying to set up my internet connection with my iphone 5 and the hotspot. I had no problem using the same computer with iphone 4. i am unable to do it and get an IP address conflict

I have a new iphone 5 with a personal hotspot. Am trying to establish wifi connection and get this message on my laptop. Network error, another computer is using the same IP address.

A free app called Fing will tell you what devices are connected to your network and what IP addresses they are using. Rebooting/resetting each of your devices will probably resolve things.
tt2

Problem Using Single Sign on with Deployed Applications

I have deployed some appliciations to a standalone OC4J. I am using Identity Management for authentication and it works unless I check the Single Sign on box here:
OC4J
Administration ->
Security Provider->
Enable SSO Authentication
I receive this error:
499 Oracle SSO
Oracle SSO
(all my products are version 10.1.1.3)
I guess I should run ssoreg and osso1013. I can't find the latter.
I appreciate any comment.
Regards,
Farbod

Dear John,
from my point of view, we have to seperate the problem in two parts:
1.) The automatic logon to the struts application via SSO.
2.) The session sharing via some J2EE mechanism.
For the SSO (1.) You have to logged on to the portal - with a cookie on the clientside. This cookie can be used for SSO by Your Struts application as long as You share the same session (same browserinstance). This is not difficult examples are available.
The sessionsharing between a J2EE aap - Struts and an iView is an intersting point. I hope I can get some time to try this out. One trick which is not too clever is to store the session data serialized in a database and privide the sessionid in the url which calls the iView or Struts. Sessionsharing between iViews is no problem as long as You use the HTTPSession.
Walter

Problem using DVD/CD drive with Thinkpad Advanced Dock -- drive gets "lost" on start-up

Hello, I have a Thinkpad Advanced Docking station, a Thinkpad T60p, and an UltraBay Slim Super Multi-Burner Drive (HL-DT-ST DVDRAM GSA-4083N) that I use in the docking station's expansion bay. Whenever I restart the docking station and computer, the multi-burner drive becomes "lost" -- I have to physically remove the drive and re-insert it for the computer to recognize the drive.
Has anyone else experienced this problem?
Does anyone know how to get around it?

Yes, I have had the same problem. I have the HP Pavilion 14.1" but similar stuff. I don't know if you noticed searching but there are a LOT of people who have this problem. Apple won't help me because they say its not them. HP and Costco Tech Support can't figure it out and I don't have another 3+ hours to sit on the phone more to figure it out. Its an issue with Apple and Windows believe it or not, I am considering selling my ipod and not using itunes to purchase music and movies anymore. So are friends. The ONE way to fix it is you go into the regedit and delete the upper and lower drive filters for the drive. The problem with this is now when you go back into itunes it will no longer recognize your drive. So two options you are left with A) Itunes working without your cd drive working at all OR B) your cd drive working for everything BUT itunes and when you use itunes you get that message about not finding your cd drive. So no matter what you do, itunes and your drive will never work together. That is just how it is and NO SOLUTION has been found. Apple doesn't know or care. HP or Microsoft has no idea because its something Apple did. And despite people frantically trying to find solutions online, there really doesn't seem to be any to this point. If someone finds a viable working solution to this problem to get your drive and itunes to work TOGETHER even after restarting, I would be VERY HAPPY as well as 'computerguy'!

Problem using extension manager CS5 with command line

Hi All,
I had posted my question here : http://forums.adobe.com/message/4695419#4695419, but was advised to do so here as well..
I have a requirement to get the path of all the installed Extension Managers on any Windows system for the purpose of installing an extension.. I thought, there would be no problem in getting the path from the registry. There was no problem in Win XP, but the same does not work for Win 7.. I googled, and found alternate ways to get the path.
Here is the link : http://forums.adobe.com/thread/851359. I followed the instructions in this post, but failed to get this working for CS5 as mentioned in my previous thread... No problem for CS5.1 and CS6.. Why is that?
I want to get this working for CS5, CS5.1, CS6... How can I get the path of all the Extension Manager versions installed on a Windows system?
Please refer to the following screenshots to get a better understanding of my problem,
I created a jsx file named "Result.jsx", which I saved in my D drive, with the following code,
resultFile = new File("D:/result.log");
resultFile.open("w");
resultFile.write(BridgeTalk.__diagnostics__);
resultFile.close();
If I run this directly from ESTK CS5, there is no problem, and I get the result.log file. I tried to execute this script via command line as shown in the screenshot,
On executing the above, I got the following error,
What is going wrong?
Please help!

I am sorry for the poor documentation of Extension Manager which causes you so much trouble.
1. You can use BridgeTalk API to ask specific version of Extension Manager to do something. There is sample in packaging_extension.pdf about this. You don't need to know the installation path of Extension Manager. One thing to note is that the value of bt.target is version specific, i.e. "exman-5.0", "exman-5.5" send this message to different version of Extension Manager, so you can change this value to install/enable/disable/remove extensions using different version of Extension Manager. More detailed documentation of BridgeTalk can be found by clicking "Help" menu then clicking "Javascript Tools Guide CS5" in "Adobe ExtendScript Toolkit CS5".
2. Specific version of Extension Manager only manage extensions for corresponding version of product. You should use Extension Manager CS5 to install extensions for Photoshop CS5. The reason that the extension you installed for Photoshop CS5.1 using Extension Manager CS5.5 is displayed for Photoshop CS5 in Extension Manager CS5 is that two versions of Photoshop specified the same directory for Extension Manager to manage extensions. This is a defect and will cause some problems if multiple versions of Photoshop co-existed in one machine. But "to find previous (CS5) extension manager and to enable it" should work for you, I guess you use command line to enable it and specify wrong product name (see #3) so that it doesn't work.
3. When using command line, you should specify "product" attribute with the name displayed at the left panel of Extension Manager. So "Photoshop CS5 32" is correct. Remember to enclose it with double quote because of existence of space character.
4. As above mentioned, use display name of Photoshop, and call proper version of Extension Manager by BridgeTalk.

HT204023 I was able to activate and use my personal hotspot with my iPad4 yesterday but today it says I have to contact my carrier! I did make the $50 payment today as my data was used up this morning, could that be the issue? How long does it take to w

So yesterday was the first time I used my iPad's personal hotspot, and it was great. Just click on it and typed in the password on my laptop. This morning while working out my iPad's data plan ran out so I paid another $50 and was good to go. However when I tried the personal hotspot, I get a message to contact my carrier. What is up with that?

Contact your carrier and ask them.

Problem using file based JNDI with JMS Bridge, WL 6.1sp3

 I am trying to connect an MQ queue to a Weblogic JMS queue using the JMS bridge,
 WLS6.1sp3. I have the CR081404_61sp3.jar and CR081511_61sp3.jar patches.
 I am having trouble getting the bridge to look up the MQ queue in the file based
 JNDI. According to the log it is trying to use a weblogic.jndi.WLInitialContextFactory
 instead of a com.sun.jndi.fscontext.RefFSContextFactory, which is what it is configured
 to use. I am getting the following error:
 <Sep 29, 2002 12:16:22 PM EDT> <Info> <MessagingBridge> <Bridge "Provd Messaging
 Bridge" is getting the connections to the two adapters.>
 <Sep 29, 2002 12:16:22 PM EDT> <Debug> <MessagingBridge> <Messaging Bridge Debugging
 RUNTIME! Bridge Provd Messaging Bridge In getConnections: isStopped = false>
 <Sep 29, 2002 12:16:22 PM EDT> <Debug> <MessagingBridge> <Messaging Bridge Debugging
 RUNTIME! Bridge Provd Messaging Bridge Getting source connection: sourceConnSpec
 = weblogic.jms.adapter.JMSConnectionSpec@27166f>
 <Sep 29, 2002 12:16:22 PM EDT> <Info> <Connector> <Unable to locate context: java:/comp/env/wls-connector-resref>
 <Sep 29, 2002 12:16:22 PM EDT> <Info> <Connector> <Unable to determine Resource
 Principal for Container Managed Security Context.>
 <Sep 29, 2002 12:16:22 PM EDT> <Info> <Connector> <Unable to locate context: java:/comp/env/wls-connector-resref>
 <Sep 29, 2002 12:16:22 PM EDT> <Info> <Connector> <Unable to determine Resource
 Principal for Container Managed Security Context.>
 <Sep 29, 2002 12:16:22 PM EDT> <Warning> <Connector> << Weblogic Messaging Bridge
 Adapter (XA) > ResourceAllocationException of javax.resource.ResourceException:
 ConnectionFactory: failed to get initial context (InitialContextFactory =weblogic.jndi.WLInitialContextFactory,
 url = file:/opt/mqm/java/mq-jndi, user name = guest, password = guest on createManagedConnection.>
 <Sep 29, 2002 12:16:22 PM EDT> <Error> <Connector> <Error granting connection
 request.>
 <Sep 29, 2002 12:16:22 PM EDT> <Info> <MessagingBridge> <Bridge "Provd Messaging
 Bridge" failed to connect to the source destination and will try again in 25 seconds.
 (javax.resource.spi.ResourceAllocationException: CreateManagedConnection Error:
 ConnectionFactory: failed to get initial context (InitialContextFactory =weblogic.jndi.WLInitialContextFactory,
 url = file:/opt/mqm/java/mq-jndi, user name = guest, password = guest)>
 <
 The configuration of the bridge, printed out in the log, is:
 <Sep 29, 2002 12:16:00 PM EDT> <Debug> <MessagingBridge> <Messaging Bridge Debugging
 STARTUP! Bridge Provd Messaging Bridge's source properties are:
 AdapterJNDIName=eis.jms.WLSConnectionFactoryJNDIXA
 Classpath=null
 ConnectionFactoryJNDIName = PMS.mqQcf
 ConnectionURL = file:/opt/mqm/java/mq-jndi
 InitialConnectionFactory = com.sun.jndi.fscontext.RefFSContextFactory
 DestinationType = Queue
 DestinationJNDIName = PMS.mqProvdRequest>
 <Sep 29, 2002 12:16:00 PM EDT> <Debug> <MessagingBridge> <Messaging Bridge Debugging
 STARTUP! Bridge Provd Messaging Bridge's target properties are:
 AdapterJNDIName=eis.jms.WLSConnectionFactoryJNDIXA
 Classpath=null
 DestinationType = Queue>
 Am I correct in assuming it should be using the fscontext connection factory?
 Why is it using the weblogic one?
 Jason


CR081511_61sp3.jar patch should fix the problem. Make sure that the
 jar file is picked up. It should be put before other weblogic jar files.
 You should be able to tell if it is picked up by looking at the first
 couple of lines of your server log file.
 Dongbo
 Jason Kriese wrote:
 >
 > I am trying to connect an MQ queue to a Weblogic JMS queue using the JMS bridge,
 > WLS6.1sp3. I have the CR081404_61sp3.jar and CR081511_61sp3.jar patches.
 >
 > I am having trouble getting the bridge to look up the MQ queue in the file based
 > JNDI. According to the log it is trying to use a weblogic.jndi.WLInitialContextFactory
 > instead of a com.sun.jndi.fscontext.RefFSContextFactory, which is what it is configured
 > to use. I am getting the following error:
 >
 > <Sep 29, 2002 12:16:22 PM EDT> <Info> <MessagingBridge> <Bridge "Provd Messaging
 > Bridge" is getting the connections to the two adapters.>
 > <Sep 29, 2002 12:16:22 PM EDT> <Debug> <MessagingBridge> <Messaging Bridge Debugging
 > RUNTIME! Bridge Provd Messaging Bridge In getConnections: isStopped = false>
 > <Sep 29, 2002 12:16:22 PM EDT> <Debug> <MessagingBridge> <Messaging Bridge Debugging
 > RUNTIME! Bridge Provd Messaging Bridge Getting source connection: sourceConnSpec
 > = weblogic.jms.adapter.JMSConnectionSpec@27166f>
 > <Sep 29, 2002 12:16:22 PM EDT> <Info> <Connector> <Unable to locate context: java:/comp/env/wls-connector-resref>
 >
 > <Sep 29, 2002 12:16:22 PM EDT> <Info> <Connector> <Unable to determine Resource
 > Principal for Container Managed Security Context.>
 > <Sep 29, 2002 12:16:22 PM EDT> <Info> <Connector> <Unable to locate context: java:/comp/env/wls-connector-resref>
 >
 > <Sep 29, 2002 12:16:22 PM EDT> <Info> <Connector> <Unable to determine Resource
 > Principal for Container Managed Security Context.>
 > <Sep 29, 2002 12:16:22 PM EDT> <Warning> <Connector> << Weblogic Messaging Bridge
 > Adapter (XA) > ResourceAllocationException of javax.resource.ResourceException:
 > ConnectionFactory: failed to get initial context (InitialContextFactory =weblogic.jndi.WLInitialContextFactory,
 > url = file:/opt/mqm/java/mq-jndi, user name = guest, password = guest on createManagedConnection.>
 >
 > <Sep 29, 2002 12:16:22 PM EDT> <Error> <Connector> <Error granting connection
 > request.>
 > <Sep 29, 2002 12:16:22 PM EDT> <Info> <MessagingBridge> <Bridge "Provd Messaging
 > Bridge" failed to connect to the source destination and will try again in 25 seconds.
 > (javax.resource.spi.ResourceAllocationException: CreateManagedConnection Error:
 > ConnectionFactory: failed to get initial context (InitialContextFactory =weblogic.jndi.WLInitialContextFactory,
 > url = file:/opt/mqm/java/mq-jndi, user name = guest, password = guest)>
 > <
 >
 > The configuration of the bridge, printed out in the log, is:
 >
 > <Sep 29, 2002 12:16:00 PM EDT> <Debug> <MessagingBridge> <Messaging Bridge Debugging
 > STARTUP! Bridge Provd Messaging Bridge's source properties are:
 > AdapterJNDIName=eis.jms.WLSConnectionFactoryJNDIXA
 > Classpath=null
 > ConnectionFactoryJNDIName = PMS.mqQcf
 > ConnectionURL = file:/opt/mqm/java/mq-jndi
 > InitialConnectionFactory = com.sun.jndi.fscontext.RefFSContextFactory
 > DestinationType = Queue
 > DestinationJNDIName = PMS.mqProvdRequest>
 > <Sep 29, 2002 12:16:00 PM EDT> <Debug> <MessagingBridge> <Messaging Bridge Debugging
 > STARTUP! Bridge Provd Messaging Bridge's target properties are:
 > AdapterJNDIName=eis.jms.WLSConnectionFactoryJNDIXA
 > Classpath=null
 > DestinationType = Queue>
 >
 > Am I correct in assuming it should be using the fscontext connection factory?
 > Why is it using the weblogic one?
 >
 > Jason

Unusual problem using Arial Black font with #'s

We have encountered a rather unusual problem.
Recently one of our customers contacted us about a problem with their job. They used #'s in arial black and regular throughout their document. Everywhere the #'s were in Arial Black they came out looking like an entirely different font. All of the files that we have created from their document appear correctly. Even the proofs created from the files printed correctly. However at the point of Esko's Nexus program creating the tiff file to make the press plates we are getting the incorrect results. I have even created a new document using our fonts in multiple sizes and I am getting the same results. As you can see the rest of the text in the same font is imaging properly. It is only the #'s that are the problem.
This is a screen capture of the PDF I created:
This is a screen capture of the results from the plate tiff image:
I am positive that it is not an issue with Esko's Nexus software as I have recreated this text in Quark, Miccrosoft Word, and Microsoft Publisher and they all imaged properly.
I am only encountering this with Adobe software. I am getting the same results from both InDesign and Illustrator. I have run the file from multiple Macs with various OS systems and from a PC each with their own font sets. I have even run the file from all versions of InDesign that we own (CC2014, CC, CS6, CS5.5) and they ALL give me incorrect results. As you can see from the images above it is ONLY the # character in Arial Black that is a problem.
I'm at a loss as to how to solve this problem.
Larry Meirndorf
BRD Printing
Prepress Supervisor

Images of full font set:
Correct from Quark:
Incorrect from InDesign:

Problems using sprites in CM with Firefox

Hi,
Iu2019m tying to improve Portal Performance, improving XMLForms content, so decided to reduce the number of requests (images) using sprites, the problem is, for some reason, that I canu2019t understand, attribute u201Cbackgroundu201D or u201Cbackground-imageu201D, are being suppressed by the XMLForms XSLT Pipeline in Firefox, not in IE.
Example:
Using Firefox, create a new Content using a XMLForm with an HTML Editor in the model, in Firefox, this HTML Editor is replaced by a Textarea, insert something like u201C<A id=A20091013169500 title="Gripe A (H1N1)" style="DISPLAY: block; BACKGROUND: url(/irj/go/km/docs/documents/Images/destaques.gif) 0px 0px; WIDTH: 215px; HEIGHT: 50px" href="http://portaldev.tduarte.pt/irj/portal/tduarte/Contacte-nos" target=_top></A>u201D (use an image in your CM), after saving, the image is not being displayed, and after inspecting the element with firebug, I can see the attribute background was completely removed.
Thanks & Regards,
John

Hi Tobias,
Thanks for the tip, it is valuable, but I already knowed from u201CHow to Tune the Performance of Knowledge Management (NW7.0)u201D, it improves the download, but does not reduce the number of requests.
Besides this, what is the reason for working in IE and not in Firefox?
Besides all the above mentioned points, it is not possible to apply a cache, because Iu2019m talking about an iView of Highlights in the first page, that changes constantly, without a timebase defined.
Thanks & Regards,
John

Droid X - Problem using 3G Mobile Hotspot

About half the time I use my Droid X 3G Mobile Hotspot feature it drops from a 3G signal to a 1X signal. I will have about 3 bars of 3G signal, I will turn the 3G Mobile Hotspot feature on and the signal will drop to a 1X signal. If I turn the feature off, it will return to a 3G signal. Does anybody else have this problem or know how to fix it?
Thanks

sigepjth wrote:
About half the time I use my Droid X 3G Mobile Hotspot feature it drops from a 3G signal to a 1X signal. I will have about 3 bars of 3G signal, I will turn the 3G Mobile Hotspot feature on and the signal will drop to a 1X signal. If I turn the feature off, it will return to a 3G signal. Does anybody else have this problem or know how to fix it?
Thanks
I have seen a few reference to the number of 3G bars they have, are you by chance referring to the signal strength bars, because if you are combining these two I hope you relieve the bars meter represent the phones signal strength not the 3G strength.. The phone has more than one radio signal, the phone and data signal are not transmitted from the same signal so just because the phone is receiving a good does not mean the 3G data signal is as strong... The only indicator you have to indicate your data connection is the 3G and 1X indicator on the top status bar.
Try moving device and see if the phone returns to 3G mode because I haven't noticed this issue but I have noticed the drop of a signal strength of phone when a data connection is active. Never nothing major but it does drop until data connection is disconnected. Sounds like a software bug.

Problems using LG Vortex hotspot with secure sites

Similar Messages

Maybe you are looking for